* compile.c: Fix formatting.

[deliverable/binutils-gdb.git] / gprof / configure

diff --git a/gprof/configure b/gprof/configure
index 899b640c07616d8fdf31aa387e49fd6fa4ab41c8..1b7cbbf29ab3926857597867388d8fe96f988ecc 100755 (executable)
--- a/gprof/configure
+++ b/gprof/configure
@@ -21,6 +21,8 @@ ac_help="$ac_help
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
 ac_help="$ac_help
   --disable-libtool-lock  avoid locking (might break parallel builds)"
+ac_help="$ac_help
+  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
 ac_help="$ac_help
   --disable-nls           do not use Native Language Support"
 ac_help="$ac_help
@@ -47,7 +49,6 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
-sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -162,7 +163,6 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -333,11 +333,6 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -503,16 +498,12 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
   fi
-else
-  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -550,6 +541,68 @@ else
   ac_n= ac_c='\c' ac_t=
 fi
 
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:546: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 551 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:562: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_cygwin=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:579: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 584 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:591: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_mingw32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
 
 
 ac_aux_dir=
@@ -599,7 +652,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:603: checking host system type" >&5
+echo "configure:656: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -620,7 +673,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:624: checking target system type" >&5
+echo "configure:677: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -638,7 +691,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:642: checking build system type" >&5
+echo "configure:695: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -661,6 +714,50 @@ test "$host_alias" != "$target_alias" &&
   program_prefix=${target_alias}-
 
 
+        echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
+echo "configure:719: checking for strerror in -lcposix" >&5
+ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lcposix  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 727 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char strerror();
+
+int main() {
+strerror()
+; return 0; }
+EOF
+if { (eval echo configure:738: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  LIBS="$LIBS -lcposix"
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  
+
+
+BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[        ]*\([^  ]*\)[   ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
 # incompatible versions:
@@ -673,7 +770,7 @@ test "$host_alias" != "$target_alias" &&
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:677: checking for a BSD compatible install" >&5
+echo "configure:774: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -726,7 +823,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:730: checking whether build environment is sane" >&5
+echo "configure:827: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -783,7 +880,7 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:787: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:884: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -812,7 +909,7 @@ fi
 
 PACKAGE=gprof
 
-VERSION=2.9.5
+VERSION=${BFD_VERSION}
 
 if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
   { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
@@ -829,7 +926,7 @@ EOF
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:833: checking for working aclocal" >&5
+echo "configure:930: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -842,7 +939,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:846: checking for working autoconf" >&5
+echo "configure:943: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -855,7 +952,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:859: checking for working automake" >&5
+echo "configure:956: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -868,7 +965,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:872: checking for working autoheader" >&5
+echo "configure:969: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -881,7 +978,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:885: checking for working makeinfo" >&5
+echo "configure:982: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -899,7 +996,7 @@ fi
 if test "${enable_shared+set}" = set; then
   enableval="$enable_shared"
   p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
 yes) enable_shared=yes ;;
 no) enable_shared=no ;;
 *)
@@ -922,7 +1019,7 @@ fi
 if test "${enable_static+set}" = set; then
   enableval="$enable_static"
   p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
 yes) enable_static=yes ;;
 no) enable_static=no ;;
 *)
@@ -945,7 +1042,7 @@ fi
 if test "${enable_fast_install+set}" = set; then
   enableval="$enable_fast_install"
   p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
 yes) enable_fast_install=yes ;;
 no) enable_fast_install=no ;;
 *)
@@ -964,40 +1061,10 @@ else
   enable_fast_install=yes
 fi
 
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:971: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1001: checking for $ac_word" >&5
+echo "configure:1068: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1027,7 +1094,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1031: checking for $ac_word" >&5
+echo "configure:1098: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1078,7 +1145,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1082: checking for $ac_word" >&5
+echo "configure:1149: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1110,7 +1177,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1114: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1181: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1121,12 +1188,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1125 "configure"
+#line 1192 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1152,12 +1219,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1156: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1223: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1161: checking whether we are using GNU C" >&5
+echo "configure:1228: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1166,7 +1233,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1237: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1185,7 +1252,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1189: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1256: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1225,12 +1292,18 @@ else
 fi
 
 ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
+if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1232: checking for ld used by GCC" >&5
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
-  case "$ac_prog" in
+echo "configure:1299: checking for ld used by GCC" >&5
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
     # Accept absolute paths.
     [\\/]* | [A-Za-z]:[\\/]*)
       re_direlt='/[^/][^/]*/\.\./'
@@ -1252,12 +1325,12 @@ echo "configure:1232: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1256: checking for GNU ld" >&5
+echo "configure:1329: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1259: checking for non-GNU ld" >&5
+echo "configure:1332: checking for non-GNU ld" >&5
 fi
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test -z "$LD"; then
@@ -1265,11 +1338,11 @@ else
   for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      ac_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD="$ac_dir/$ac_prog"
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some GNU ld's only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
        test "$with_gnu_ld" != no && break
       else
        test "$with_gnu_ld" != yes && break
@@ -1278,103 +1351,611 @@ else
   done
   IFS="$ac_save_ifs"
 else
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
 fi
 fi
 
-LD="$ac_cv_path_LD"
+LD="$lt_cv_path_LD"
 if test -n "$LD"; then
   echo "$ac_t""$LD" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1294: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  ac_cv_prog_gnu_ld=yes
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1367: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  lt_cv_prog_gnu_ld=yes
+else
+  lt_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1384: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1396: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    tmp_nm=$ac_dir/${ac_tool_prefix}nm
+    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      # Tru64's nm complains that /dev/null is an invalid object file
+      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+       lt_cv_path_NM="$tmp_nm -B"
+       break
+      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+       lt_cv_path_NM="$tmp_nm -p"
+       break
+      else
+       lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+       continue # so that we can try to find one that supports BSD flags
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+
+NM="$lt_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1434: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+  rm -f conftestdata
+  ac_cv_prog_LN_S="ln -s"
+else
+  ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1455: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi4*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin* | mingw* |pw32*)
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  case "$host_os" in
+  rhapsody* | darwin1.012)
+    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+    ;;
+  *) # Darwin 1.3 on
+    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+    ;;
+  esac
+  ;;
+
+freebsd* )
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20*|hpux11*)
+  lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libc.sl
+  ;;
+
+irix5* | irix6*)
+  case $host_os in
+  irix5*)
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case $LD in
+    *-32|*"-32 ") libmagic=32-bit;;
+    *-n32|*"-n32 ") libmagic=N32;;
+    *-64|*"-64 ") libmagic=64-bit;;
+    *) libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+    ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  case $host_cpu in
+  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+    lt_cv_deplibs_check_method=pass_all ;;
+  *)
+    # glibc up to 2.1.1 does not perform some relocations on ARM
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+  fi
+  ;;
+
+newsos6)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+osf3* | osf4* | osf5*)
+  # this will be overridden with pass_all, but let us keep it just in case
+  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  lt_cv_file_magic_test_file=/lib/libc.so
+  ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case $host_vendor in
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  esac
+  ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1619: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1625: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  for ac_file in conftest.*; do
+    case $ac_file in
+    *.c) ;;
+    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+    esac
+  done
+else
+  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1645: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+  ac_cv_exeext=.exe
+else
+  rm -f conftest*
+  echo 'int main () { return 0; }' > conftest.$ac_ext
+  ac_cv_exeext=
+  if { (eval echo configure:1655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+    for file in conftest.*; do
+      case $file in
+      *.c | *.o | *.obj) ;;
+      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+      esac
+    done
+  else
+    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+  fi
+  rm -f conftest*
+  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+if test $host != $build; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1688: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case $MAGIC_CMD in
+  /*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC_CMD="$MAGIC_CMD"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+       case $deplibs_check_method in
+       "file_magic "*)
+         file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+         MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+         if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+           egrep "$file_magic_regex" > /dev/null; then
+           :
+         else
+           cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+         fi ;;
+       esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1750: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case $MAGIC_CMD in
+  /*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC_CMD="$MAGIC_CMD"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+       case $deplibs_check_method in
+       "file_magic "*)
+         file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+         MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+         if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+           egrep "$file_magic_regex" > /dev/null; then
+           :
+         else
+           cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+         fi ;;
+       esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1821: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1853: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
 else
-  ac_cv_prog_gnu_ld=no
+  RANLIB=":"
 fi
 fi
 
-echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
-
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1310: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1888: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  ac_cv_path_NM="$NM"
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 else
-  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-       ac_cv_path_NM="$ac_dir/nm -B"
-       break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-       ac_cv_path_NM="$ac_dir/nm -p"
-       break
-      else
-       ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-       continue # so that we can try to find one that supports BSD flags
-      fi
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+      break
     fi
   done
   IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
 fi
 fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
 
-NM="$ac_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
 
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1346: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1920: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
-  rm -f conftestdata
-  ac_cv_prog_LN_S="ln -s"
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 else
-  ac_cv_prog_LN_S=ln
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="strip"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
 fi
 fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
-  echo "$ac_t""yes" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
 
+else
+  STRIP=":"
+fi
+fi
 
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
 
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
 test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
 test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
 
 
 # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
@@ -1386,14 +1967,25 @@ fi
 test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
 test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+  withval="$with_pic"
+  pic_mode="$withval"
+else
+  pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-case "$lt_target" in
+case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1395 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1396: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-    case "`/usr/bin/file conftest.o`" in
+  echo '#line 1987 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1988: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
       LD="${LD-ld} -32"
       ;;
@@ -1413,19 +2005,27 @@ case "$lt_target" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1417: checking whether the C compiler needs -belf" >&5
+echo "configure:2009: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  cat > conftest.$ac_ext <<EOF
-#line 1422 "configure"
+  
+     ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+     cat > conftest.$ac_ext <<EOF
+#line 2022 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1429: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2029: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1435,6 +2035,13 @@ else
   lt_cv_cc_needs_belf=no
 fi
 rm -f conftest*
+     ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
 fi
 
 echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
@@ -1498,12 +2105,14 @@ rm -f confcache
 
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
@@ -1517,7 +2126,7 @@ fi
 
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -1526,6 +2135,11 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 # clobbered by the next message.
 exec 5>>./config.log
 
+  
+
+  
+        
+        
 
 
 
@@ -1534,7 +2148,7 @@ exec 5>>./config.log
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1538: checking for $ac_word" >&5
+echo "configure:2152: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1564,7 +2178,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1568: checking for $ac_word" >&5
+echo "configure:2182: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1615,7 +2229,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1619: checking for $ac_word" >&5
+echo "configure:2233: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1647,7 +2261,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1651: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2265: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1658,12 +2272,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1662 "configure"
+#line 2276 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1689,12 +2303,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1693: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2307: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1698: checking whether we are using GNU C" >&5
+echo "configure:2312: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1703,7 +2317,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1707: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2321: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1722,7 +2336,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1726: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2340: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1765,7 +2379,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1769: checking for a BSD compatible install" >&5
+echo "configure:2383: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1818,36 +2432,15 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:1823: checking for POSIXized ISC" >&5
-if test -d /etc/conf/kconfig.d &&
-  grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
-then
-  echo "$ac_t""yes" 1>&6
-  ISC=yes # If later tests want to check for ISC.
-  cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
-EOF
-
-  if test "$GCC" = yes; then
-    CC="$CC -posix"
-  else
-    CC="$CC -Xp"
-  fi
-else
-  echo "$ac_t""no" 1>&6
-  ISC=
-fi
-
 for ac_func in setmode
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1846: checking for $ac_func" >&5
+echo "configure:2439: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1851 "configure"
+#line 2444 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1870,7 +2463,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1895,9 +2488,9 @@ fi
 done
 
 
-ALL_LINGUAS=
+ALL_LINGUAS="fr tr"
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1901: checking how to run the C preprocessor" >&5
+echo "configure:2494: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1912,13 +2505,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1916 "configure"
+#line 2509 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1922: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2515: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1929,13 +2522,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1933 "configure"
+#line 2526 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2532: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1946,13 +2539,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1950 "configure"
+#line 2543 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2549: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1976,13 +2569,43 @@ else
 fi
 echo "$ac_t""$CPP" 1>&6
 
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2576: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1981: checking for ANSI C header files" >&5
+echo "configure:2604: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1986 "configure"
+#line 2609 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -1990,7 +2613,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1994: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2617: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2007,7 +2630,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2011 "configure"
+#line 2634 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -2025,7 +2648,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 2029 "configure"
+#line 2652 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -2046,7 +2669,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 2050 "configure"
+#line 2673 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -2057,7 +2680,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:2061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -2081,12 +2704,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2085: checking for working const" >&5
+echo "configure:2708: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2090 "configure"
+#line 2713 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2135,7 +2758,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:2139: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2762: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -2156,21 +2779,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2160: checking for inline" >&5
+echo "configure:2783: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 2167 "configure"
+#line 2790 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:2174: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2797: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -2196,12 +2819,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2200: checking for off_t" >&5
+echo "configure:2823: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2205 "configure"
+#line 2828 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2229,12 +2852,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2233: checking for size_t" >&5
+echo "configure:2856: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2238 "configure"
+#line 2861 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2264,19 +2887,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2268: checking for working alloca.h" >&5
+echo "configure:2891: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2273 "configure"
+#line 2896 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:2280: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -2297,12 +2920,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2301: checking for alloca" >&5
+echo "configure:2924: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2306 "configure"
+#line 2929 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -2330,7 +2953,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:2334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -2362,12 +2985,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2366: checking whether alloca needs Cray hooks" >&5
+echo "configure:2989: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2371 "configure"
+#line 2994 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -2392,12 +3015,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2396: checking for $ac_func" >&5
+echo "configure:3019: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2401 "configure"
+#line 3024 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2420,7 +3043,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3047: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2447,7 +3070,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2451: checking stack direction for C alloca" >&5
+echo "configure:3074: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2455,7 +3078,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 2459 "configure"
+#line 3082 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -2474,7 +3097,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:2478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3101: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -2495,21 +3118,21 @@ EOF
 
 fi
 
-for ac_hdr in unistd.h
+for ac_hdr in stdlib.h unistd.h sys/stat.h sys/types.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2503: checking for $ac_hdr" >&5
+echo "configure:3126: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2508 "configure"
+#line 3131 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2513: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3136: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2538,12 +3161,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2542: checking for $ac_func" >&5
+echo "configure:3165: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2547 "configure"
+#line 3170 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2566,7 +3189,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2591,7 +3214,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2595: checking for working mmap" >&5
+echo "configure:3218: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2599,7 +3222,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2603 "configure"
+#line 3226 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -2627,11 +3250,24 @@ else
 #include <fcntl.h>
 #include <sys/mman.h>
 
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+
+#if HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
 /* This mess was copied from the GNU getpagesize.h.  */
 #ifndef HAVE_GETPAGESIZE
-# ifdef HAVE_UNISTD_H
-#  include <unistd.h>
-# endif
 
 /* Assume that all systems that can run configure have sys/param.h.  */
 # ifndef HAVE_SYS_PARAM_H
@@ -2739,7 +3375,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:2743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -2767,17 +3403,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2771: checking for $ac_hdr" >&5
+echo "configure:3407: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2776 "configure"
+#line 3412 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2781: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3417: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2807,12 +3443,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2811: checking for $ac_func" >&5
+echo "configure:3447: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2816 "configure"
+#line 3452 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2835,7 +3471,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2839: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3475: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2864,12 +3500,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2868: checking for $ac_func" >&5
+echo "configure:3504: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2873 "configure"
+#line 3509 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2892,7 +3528,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2926,19 +3562,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:2930: checking for LC_MESSAGES" >&5
+echo "configure:3566: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2935 "configure"
+#line 3571 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:2942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -2959,7 +3595,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:2963: checking whether NLS is requested" >&5
+echo "configure:3599: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -2979,7 +3615,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:2983: checking whether included gettext is requested" >&5
+echo "configure:3619: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -2998,17 +3634,17 @@ fi
 
        ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3002: checking for libintl.h" >&5
+echo "configure:3638: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3007 "configure"
+#line 3643 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3012: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3648: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3025,19 +3661,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3029: checking for gettext in libc" >&5
+echo "configure:3665: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3034 "configure"
+#line 3670 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3677: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -3053,7 +3689,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
           if test "$gt_cv_func_gettext_libc" != "yes"; then
             echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3057: checking for bindtextdomain in -lintl" >&5
+echo "configure:3693: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -3061,7 +3697,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 3065 "configure"
+#line 3701 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -3072,7 +3708,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:3076: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3088,19 +3724,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3092: checking for gettext in libintl" >&5
+echo "configure:3728: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3097 "configure"
+#line 3733 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:3104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -3128,7 +3764,7 @@ EOF
              # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3132: checking for $ac_word" >&5
+echo "configure:3768: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3162,12 +3798,12 @@ fi
                for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3166: checking for $ac_func" >&5
+echo "configure:3802: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3171 "configure"
+#line 3807 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3190,7 +3826,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3217,7 +3853,7 @@ done
                # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3221: checking for $ac_word" >&5
+echo "configure:3857: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3253,7 +3889,7 @@ fi
                # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3257: checking for $ac_word" >&5
+echo "configure:3893: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3285,7 +3921,7 @@ else
 fi
 
                cat > conftest.$ac_ext <<EOF
-#line 3289 "configure"
+#line 3925 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3293,7 +3929,7 @@ extern int _nl_msg_cat_cntr;
                               return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:3297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
                   DATADIRNAME=share
@@ -3325,7 +3961,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3329: checking for $ac_word" >&5
+echo "configure:3965: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3359,7 +3995,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3363: checking for $ac_word" >&5
+echo "configure:3999: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3395,7 +4031,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3399: checking for $ac_word" >&5
+echo "configure:4035: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3485,7 +4121,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3489: checking for catalogs to be installed" >&5
+echo "configure:4125: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -3513,17 +4149,17 @@ echo "configure:3489: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
         ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3517: checking for linux/version.h" >&5
+echo "configure:4153: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3522 "configure"
+#line 4158 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3527: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4163: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3568,7 +4204,7 @@ fi
       l=
    
 
-            if test -d $srcdir/po; then
+            if test -f $srcdir/po/POTFILES.in; then
       test -d po || mkdir po
       if test "x$srcdir" != "x."; then
         if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
@@ -3586,7 +4222,7 @@ fi
   
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3590: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4226: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -3608,72 +4244,10 @@ fi
   MAINT=$MAINTAINER_MODE_TRUE
   
 
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:3613: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 3618 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:3629: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:3646: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 3651 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:3658: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:3677: checking for executable suffix" >&5
+echo "configure:4251: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3683,10 +4257,10 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:3687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:4261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+      *.c | *.o | *.obj) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -3704,6 +4278,95 @@ echo "$ac_t""${ac_cv_exeext}" 1>&6
 ac_exeext=$EXEEXT
 
 
+for ac_hdr in sys/gmon_out.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:4286: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4291 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4296: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+echo $ac_n "checking the size of gmon pointers""... $ac_c" 1>&6
+echo "configure:4324: checking the size of gmon pointers" >&5
+if test "$cross_compiling" = yes; then
+  gmon_ptr_size=4
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4329 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+#include <stdlib.h>
+#if HAVE_SYS_GMON_OUT_H
+#include <sys/gmon_out.h>
+#endif
+main()
+{
+#if HAVE_SYS_GMON_OUT_H
+  struct gmon_cg_arc_record arc;
+  FILE *f=fopen("conftestval", "w");
+  if (!f) exit(1);
+  fprintf(f, "%d\n", sizeof(arc.from_pc));
+  exit(0);
+#else
+  FILE *f=fopen("conftestval", "w");
+  if (!f) exit(1);
+  fprintf(f, "%d\n", (int) sizeof(char *));
+  exit(1);
+#endif
+}
+EOF
+if { (eval echo configure:4352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  gmon_ptr_size=`cat conftestval`
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  gmon_ptr_size=4
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$gmon_ptr_size" 1>&6
+
+cat >> confdefs.h <<EOF
+#define GMON_PTR_SIZE $gmon_ptr_size
+EOF
+
+
 build_warnings="-W -Wall"
 # Check whether --enable-build-warnings or --disable-build-warnings was given.
 if test "${enable_build_warnings+set}" = set; then
@@ -3886,9 +4549,12 @@ s%@AUTOMAKE@%$AUTOMAKE%g
 s%@AUTOHEADER@%$AUTOHEADER%g
 s%@MAKEINFO@%$MAKEINFO%g
 s%@SET_MAKE@%$SET_MAKE%g
-s%@RANLIB@%$RANLIB%g
 s%@CC@%$CC%g
 s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@CPP@%$CPP%g
 s%@ALLOCA@%$ALLOCA%g
@@ -3915,7 +4581,6 @@ s%@l@%$l%g
 s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
 s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
 s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
 s%@WARN_CFLAGS@%$WARN_CFLAGS%g
 
 CEOF