* sparc-tdep.c, sparc-tdep.h, sparc-sol2-tdep.c, sparc64-tdep.c,

[deliverable/binutils-gdb.git] / gprof / configure

diff --git a/gprof/configure b/gprof/configure
index 1ba8205a204deea0200b57f5b1f6319e38e4847e..7bd749ca0dc79616ec9ff44eae43ea1fdb00fe4b 100755 (executable)
--- a/gprof/configure
+++ b/gprof/configure
@@ -1414,13 +1414,22 @@ echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-       { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+        # differences in whitespace do not lead to failure.
+        ac_old_val_w=`echo x $ac_old_val`
+        ac_new_val_w=`echo x $ac_new_val`
+        if test "$ac_old_val_w" != "$ac_new_val_w"; then
+          { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-       { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-       { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-       ac_cache_corrupted=:
+          ac_cache_corrupted=:
+        else
+          { echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+          eval $ac_var=\$ac_old_val
+        fi
+        { echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+        { echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
@@ -2650,6 +2659,7 @@ am__api_version="1.9"
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
 echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
 if test -z "$INSTALL"; then
@@ -2683,8 +2693,18 @@ case $as_dir/ in
            # program-specific install script used by HP pwplus--don't use.
            :
          else
-           ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-           break 3
+           rm -rf conftest.one conftest.two conftest.dir
+           echo one > conftest.one
+           echo two > conftest.two
+           mkdir conftest.dir
+           if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+             test -s conftest.one && test -s conftest.two &&
+             test -s conftest.dir/conftest.one &&
+             test -s conftest.dir/conftest.two
+           then
+             ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+             break 3
+           fi
          fi
        fi
       done
@@ -2693,15 +2713,16 @@ case $as_dir/ in
 esac
 done
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
@@ -3974,6 +3995,7 @@ _ACEOF
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
 echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
 if test -z "$INSTALL"; then
@@ -4007,8 +4029,18 @@ case $as_dir/ in
            # program-specific install script used by HP pwplus--don't use.
            :
          else
-           ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-           break 3
+           rm -rf conftest.one conftest.two conftest.dir
+           echo one > conftest.one
+           echo two > conftest.two
+           mkdir conftest.dir
+           if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+             test -s conftest.one && test -s conftest.two &&
+             test -s conftest.dir/conftest.one &&
+             test -s conftest.dir/conftest.two
+           then
+             ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+             break 3
+           fi
          fi
        fi
       done
@@ -4017,15 +4049,16 @@ case $as_dir/ in
 esac
 done
 
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
@@ -4574,13 +4607,13 @@ if test "${lt_cv_nm_interface+set}" = set; then
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:4577: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:4610: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4580: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:4613: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4583: output\"" >&5)
+  (eval echo "\"\$as_me:4616: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -5635,7 +5668,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 5638 "configure"' > conftest.$ac_ext
+  echo '#line 5671 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -6735,11 +6768,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:6738: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:6771: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:6742: \$? = $ac_status" >&5
+   echo "$as_me:6775: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -7057,11 +7090,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7060: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7093: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7064: \$? = $ac_status" >&5
+   echo "$as_me:7097: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -7162,11 +7195,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7165: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7198: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7169: \$? = $ac_status" >&5
+   echo "$as_me:7202: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -7217,11 +7250,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7220: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7253: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7224: \$? = $ac_status" >&5
+   echo "$as_me:7257: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -10014,7 +10047,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10017 "configure"
+#line 10050 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10114,7 +10147,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 10117 "configure"
+#line 10150 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H