\input texinfo @c -*-texinfo-*-
@setfilename gprof.info
-@c Copyright 1988, 1992, 1993, 1998, 1999, 2000
-@c Free Software Foundation, Inc.
+@c Copyright 1988-2013 Free Software Foundation, Inc.
@settitle GNU gprof
@setchapternewpage odd
-@ifinfo
+@c man begin INCLUDE
+@include bfdver.texi
+@c man end
+
+@ifnottex
@c This is a dir.info fragment to support semi-automated addition of
@c manuals to an info tree. zoo@cygnus.com is developing this facility.
-@format
-START-INFO-DIR-ENTRY
+@dircategory Software development
+@direntry
* gprof: (gprof). Profiling your program's execution
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
+@end direntry
+@end ifnottex
-@ifinfo
+@copying
This file documents the gprof profiler of the GNU system.
-Copyright (C) 1988, 92, 97, 98, 99, 2000 Free Software Foundation, Inc.
-
- Permission is granted to copy, distribute and/or modify this document
- under the terms of the GNU Free Documentation License, Version 1.1
- or any later version published by the Free Software Foundation;
- with no Invariant Sections, with no Front-Cover Texts, and with no
- Back-Cover Texts. A copy of the license is included in the
- section entitled "GNU Free Documentation License".
+@c man begin COPYRIGHT
+Copyright @copyright{} 1988-2013 Free Software Foundation, Inc.
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts, and with no
+Back-Cover Texts. A copy of the license is included in the
+section entitled ``GNU Free Documentation License''.
-@end ignore
-@end ifinfo
+@c man end
+@end copying
@finalout
@smallbook
@titlepage
@title GNU gprof
@subtitle The @sc{gnu} Profiler
+@ifset VERSION_PACKAGE
+@subtitle @value{VERSION_PACKAGE}
+@end ifset
+@subtitle Version @value{VERSION}
@author Jay Fenlason and Richard Stallman
@page
can use it to determine which parts of a program are taking most of the
execution time. We assume that you know how to write, compile, and
execute programs. @sc{gnu} @code{gprof} was written by Jay Fenlason.
+Eric S. Raymond made some minor corrections and additions in 2003.
@vskip 0pt plus 1filll
-Copyright @copyright{} 1988, 92, 97, 98, 99, 2000 Free Software Foundation, Inc.
+Copyright @copyright{} 1988-2013 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
- under the terms of the GNU Free Documentation License, Version 1.1
+ under the terms of the GNU Free Documentation License, Version 1.3
or any later version published by the Free Software Foundation;
with no Invariant Sections, with no Front-Cover Texts, and with no
Back-Cover Texts. A copy of the license is included in the
- section entitled "GNU Free Documentation License".
+ section entitled ``GNU Free Documentation License''.
@end titlepage
+@contents
-@ifinfo
+@ifnottex
@node Top
@top Profiling a Program: Where Does It Spend Its Time?
execution time. We assume that you know how to write, compile, and
execute programs. @sc{gnu} @code{gprof} was written by Jay Fenlason.
+This manual is for @code{gprof}
+@ifset VERSION_PACKAGE
+@value{VERSION_PACKAGE}
+@end ifset
+version @value{VERSION}.
+
This document is distributed under the terms of the GNU Free
-Documentation License. A copy of the license is included in the
-section entitled "GNU Free Documentation License".
+Documentation License version 1.3. A copy of the license is included
+in the section entitled ``GNU Free Documentation License''.
@menu
* Introduction:: What profiling means, and why it is useful.
* Executing:: Executing your program to generate profile data
* Invoking:: How to run @code{gprof}, and its options
-* Output:: Interpreting @code{gprof}'s output
+* Output:: Interpreting @code{gprof}'s output
* Inaccuracy:: Potential problems you should be aware of
* How do I?:: Answers to common questions
* Details:: Details of how profiling is done
* GNU Free Documentation License:: GNU Free Documentation License
@end menu
-@end ifinfo
+@end ifnottex
@node Introduction
@chapter Introduction to Profiling
+@ifset man
+@c man title gprof display call graph profile data
+
+@smallexample
+@c man begin SYNOPSIS
+gprof [ -[abcDhilLrsTvwxyz] ] [ -[ACeEfFJnNOpPqQZ][@var{name}] ]
+ [ -I @var{dirs} ] [ -d[@var{num}] ] [ -k @var{from/to} ]
+ [ -m @var{min-count} ] [ -R @var{map_file} ] [ -t @var{table-length} ]
+ [ --[no-]annotated-source[=@var{name}] ]
+ [ --[no-]exec-counts[=@var{name}] ]
+ [ --[no-]flat-profile[=@var{name}] ] [ --[no-]graph[=@var{name}] ]
+ [ --[no-]time=@var{name}] [ --all-lines ] [ --brief ]
+ [ --debug[=@var{level}] ] [ --function-ordering ]
+ [ --file-ordering @var{map_file} ] [ --directory-path=@var{dirs} ]
+ [ --display-unused-functions ] [ --file-format=@var{name} ]
+ [ --file-info ] [ --help ] [ --line ] [ --inline-file-names ]
+ [ --min-count=@var{n} ] [ --no-static ] [ --print-path ]
+ [ --separate-files ] [ --static-call-graph ] [ --sum ]
+ [ --table-length=@var{len} ] [ --traditional ] [ --version ]
+ [ --width=@var{n} ] [ --ignore-non-functions ]
+ [ --demangle[=@var{STYLE}] ] [ --no-demangle ]
+ [--external-symbol-table=name]
+ [ @var{image-file} ] [ @var{profile-file} @dots{} ]
+@c man end
+@end smallexample
+
+@c man begin DESCRIPTION
+@code{gprof} produces an execution profile of C, Pascal, or Fortran77
+programs. The effect of called routines is incorporated in the profile
+of each caller. The profile data is taken from the call graph profile file
+(@file{gmon.out} default) which is created by programs
+that are compiled with the @samp{-pg} option of
+@code{cc}, @code{pc}, and @code{f77}.
+The @samp{-pg} option also links in versions of the library routines
+that are compiled for profiling. @code{Gprof} reads the given object
+file (the default is @code{a.out}) and establishes the relation between
+its symbol table and the call graph profile from @file{gmon.out}.
+If more than one profile file is specified, the @code{gprof}
+output shows the sum of the profile information in the given profile files.
+
+@code{Gprof} calculates the amount of time spent in each routine.
+Next, these times are propagated along the edges of the call graph.
+Cycles are discovered, and calls into a cycle are made to share the time
+of the cycle.
+
+@c man end
+
+@c man begin BUGS
+The granularity of the sampling is shown, but remains
+statistical at best.
+We assume that the time for each execution of a function
+can be expressed by the total time for the function divided
+by the number of times the function is called.
+Thus the time propagated along the call graph arcs to the function's
+parents is directly proportional to the number of times that
+arc is traversed.
+
+Parents that are not themselves profiled will have the time of
+their profiled children propagated to them, but they will appear
+to be spontaneously invoked in the call graph listing, and will
+not have their time propagated further.
+Similarly, signal catchers, even though profiled, will appear
+to be spontaneous (although for more obscure reasons).
+Any profiled children of signal catchers should have their times
+propagated properly, unless the signal catcher was invoked during
+the execution of the profiling routine, in which case all is lost.
+
+The profiled program must call @code{exit}(2)
+or return normally for the profiling information to be saved
+in the @file{gmon.out} file.
+@c man end
+
+@c man begin FILES
+@table @code
+@item @file{a.out}
+the namelist and text space.
+@item @file{gmon.out}
+dynamic call graph and profile.
+@item @file{gmon.sum}
+summarized dynamic call graph and profile.
+@end table
+@c man end
+
+@c man begin SEEALSO
+monitor(3), profil(2), cc(1), prof(1), and the Info entry for @file{gprof}.
+
+``An Execution Profiler for Modular Programs'',
+by S. Graham, P. Kessler, M. McKusick;
+Software - Practice and Experience,
+Vol. 13, pp. 671-685, 1983.
+
+``gprof: A Call Graph Execution Profiler'',
+by S. Graham, P. Kessler, M. McKusick;
+Proceedings of the SIGPLAN '82 Symposium on Compiler Construction,
+SIGPLAN Notices, Vol. 17, No 6, pp. 120-126, June 1982.
+@c man end
+@end ifset
+
Profiling allows you to learn where your program spent its time and which
functions called which other functions while it was executing. This
information can show you which pieces of your program are slower than you
@itemize @bullet
@item
You must compile and link your program with profiling enabled.
-@xref{Compiling}.
+@xref{Compiling, ,Compiling a Program for Profiling}.
@item
You must execute your program to generate a profile data file.
-@xref{Executing}.
+@xref{Executing, ,Executing the Program}.
@item
You must run @code{gprof} to analyze the profile data.
-@xref{Invoking}.
+@xref{Invoking, ,@code{gprof} Command Summary}.
@end itemize
The next three chapters explain these steps in greater detail.
+@c man begin DESCRIPTION
+
Several forms of output are available from the analysis.
The @dfn{flat profile} shows how much time your program spent in each function,
and how many times that function was called. If you simply want to know
which functions burn most of the cycles, it is stated concisely here.
-@xref{Flat Profile}.
+@xref{Flat Profile, ,The Flat Profile}.
The @dfn{call graph} shows, for each function, which functions called it, which
other functions it called, and how many times. There is also an estimate
of how much time was spent in the subroutines of each function. This can
suggest places where you might try to eliminate function calls that use a
-lot of time. @xref{Call Graph}.
+lot of time. @xref{Call Graph, ,The Call Graph}.
The @dfn{annotated source} listing is a copy of the program's
source code, labeled with the number of times each line of the
-program was executed. @xref{Annotated Source}.
+program was executed. @xref{Annotated Source, ,The Annotated Source
+Listing}.
+@c man end
To better understand how profiling works, you may wish to read
a description of its implementation.
-@xref{Implementation}.
+@xref{Implementation, ,Implementation of Profiling}.
@node Compiling
@chapter Compiling a Program for Profiling
cc -o myprog myprog.c utils.c -g -pg
@end example
+Note: The @samp{-pg} option must be part of your compilation options
+as well as your link options. If it is not then no call-graph data
+will be gathered and when you run @code{gprof} you will get an error
+message like this:
+
+@example
+gprof: gmon.out file is missing call-graph data
+@end example
+
+If you add the @samp{-Q} switch to suppress the printing of the call
+graph data you will still be able to see the time samples:
+
+@example
+Flat profile:
+
+Each sample counts as 0.01 seconds.
+ % cumulative self self total
+ time seconds seconds calls Ts/call Ts/call name
+ 44.12 0.07 0.07 zazLoop
+ 35.29 0.14 0.06 main
+ 20.59 0.17 0.04 bazMillion
+@end example
+
If you run the linker @code{ld} directly instead of through a compiler
such as @code{cc}, you may have to specify a profiling startup file
@file{gcrt0.o} as the first input file instead of the usual startup
ld -o myprog /lib/gcrt0.o myprog.o utils.o -lc_p
@end example
+If you are running the program on a system which supports shared
+libraries you may run into problems with the profiling support code in
+a shared library being called before that library has been fully
+initialised. This is usually detected by the program encountering a
+segmentation fault as soon as it is run. The solution is to link
+against a static version of the library containing the profiling
+support code, which for @code{gcc} users can be done via the
+@samp{-static} or @samp{-static-libgcc} command line option. For
+example:
+
+@example
+gcc -g -pg -static-libgcc myprog.c utils.c -o myprog
+@end example
+
If you compile only some of the modules of the program with @samp{-pg}, you
can still profile the program, but you won't get complete information about
the modules that were compiled without @samp{-pg}. The only information
the functions will be blank), but will greatly reduce the usefulness of the
call graph.
-If you wish to perform line-by-line profiling,
-you will also need to specify the @samp{-g} option,
-instructing the compiler to insert debugging symbols into the program
-that match program addresses to source code lines.
-@xref{Line-by-line}.
-
-In addition to the @samp{-pg} and @samp{-g} options,
-you may also wish to specify the @samp{-a} option when compiling.
-This will instrument
-the program to perform basic-block counting. As the program runs,
-it will count how many times it executed each branch of each @samp{if}
-statement, each iteration of each @samp{do} loop, etc. This will
-enable @code{gprof} to construct an annotated source code
-listing showing how many times each line of code was executed.
+If you wish to perform line-by-line profiling you should use the
+@code{gcov} tool instead of @code{gprof}. See that tool's manual or
+info pages for more details of how to do this.
+
+Note, older versions of @code{gcc} produce line-by-line profiling
+information that works with @code{gprof} rather than @code{gcov} so
+there is still support for displaying this kind of information in
+@code{gprof}. @xref{Line-by-line, ,Line-by-line Profiling}.
+
+It also worth noting that @code{gcc} implements a
+@samp{-finstrument-functions} command line option which will insert
+calls to special user supplied instrumentation routines at the entry
+and exit of every function in their program. This can be used to
+implement an alternative profiling scheme.
@node Executing
@chapter Executing the Program
generate the information that @code{gprof} needs. Simply run the program
as usual, using the normal arguments, file names, etc. The program should
run normally, producing the same output as usual. It will, however, run
-somewhat slower than normal because of the time spent collecting and the
+somewhat slower than normal because of the time spent collecting and
writing the profile data.
The way you run the program---the arguments and input that you give
just before exiting. If there is already a file called @file{gmon.out},
its contents are overwritten. There is currently no way to tell the
program to write the profile data under a different name, but you can rename
-the file afterward if you are concerned that it may be overwritten.
+the file afterwards if you are concerned that it may be overwritten.
In order to write the @file{gmon.out} file properly, your program must exit
normally: by returning from @code{main} or by calling @code{exit}. Calling
counts didn't get written into @file{gmon.out}.
The Perl script @code{bbconv.pl}, included with the @code{gprof}
source distribution, will convert a @file{bb.out} file into
-a format readable by @code{gprof}.
+a format readable by @code{gprof}. Invoke it like this:
+
+@smallexample
+bbconv.pl < bb.out > @var{bh-data}
+@end smallexample
+
+This translates the information in @file{bb.out} into a form that
+@code{gprof} can understand. But you still need to tell @code{gprof}
+about the existence of this translated information. To do that, include
+@var{bb-data} on the @code{gprof} command line, @emph{along with
+@file{gmon.out}}, like this:
+
+@smallexample
+gprof @var{options} @var{executable-file} gmon.out @var{bb-data} [@var{yet-more-profile-data-files}@dots{}] [> @var{outfile}]
+@end smallexample
@node Invoking
@chapter @code{gprof} Command Summary
@menu
* Output Options:: Controlling @code{gprof}'s output style
-* Analysis Options:: Controlling how @code{gprof} analyses its data
+* Analysis Options:: Controlling how @code{gprof} analyzes its data
* Miscellaneous Options::
* Deprecated Options:: Options you no longer need to use, but which
have been retained for compatibility
* Symspecs:: Specifying functions to include or exclude
@end menu
-@node Output Options,Analysis Options,,Invoking
+@node Output Options
@section Output Options
+@c man begin OPTIONS
These options specify which of several output formats
@code{gprof} should produce.
Many of these options take an optional @dfn{symspec} to specify
functions to be included or excluded. These options can be
specified multiple times, with different symspecs, to include
-or exclude sets of symbols. @xref{Symspecs}.
+or exclude sets of symbols. @xref{Symspecs, ,Symspecs}.
Specifying any of these options overrides the default (@samp{-p -q}),
which prints a flat profile and call graph analysis
@itemx --annotated-source[=@var{symspec}]
The @samp{-A} option causes @code{gprof} to print annotated source code.
If @var{symspec} is specified, print output only for matching symbols.
-@xref{Annotated Source}.
+@xref{Annotated Source, ,The Annotated Source Listing}.
@item -b
@itemx --brief
@itemx --flat-profile[=@var{symspec}]
The @samp{-p} option causes @code{gprof} to print a flat profile.
If @var{symspec} is specified, print flat profile only for matching symbols.
-@xref{Flat Profile}.
+@xref{Flat Profile, ,The Flat Profile}.
@item -P[@var{symspec}]
@itemx --no-flat-profile[=@var{symspec}]
The @samp{-q} option causes @code{gprof} to print the call graph analysis.
If @var{symspec} is specified, print call graph only for matching symbols
and their children.
-@xref{Call Graph}.
+@xref{Call Graph, ,The Call Graph}.
@item -Q[@var{symspec}]
@itemx --no-graph[=@var{symspec}]
If @var{symspec} is specified, @code{gprof} prints a call graph,
but excludes matching symbols.
+@item -t
+@itemx --table-length=@var{num}
+The @samp{-t} option causes the @var{num} most active source lines in
+each source file to be listed when source annotation is enabled. The
+default is 10.
+
@item -y
@itemx --separate-files
This option affects annotated source output only.
to standard-output. If this option is specified,
annotated source for a file named @file{path/@var{filename}}
is generated in the file @file{@var{filename}-ann}. If the underlying
-filesystem would truncate @file{@var{filename}-ann} so that it
+file system would truncate @file{@var{filename}-ann} so that it
overwrites the original @file{@var{filename}}, @code{gprof} generates
annotated source in the file @file{@var{filename}.ann} instead (if the
original file name has an extension, that extension is @emph{replaced}
print a tally of functions and the number of times each was called.
If @var{symspec} is specified, print tally, but exclude matching symbols.
-@item --function-ordering
+@item -r
+@itemx --function-ordering
The @samp{--function-ordering} option causes @code{gprof} to print a
suggested function ordering for the program based on profiling data.
This option suggests an ordering which may improve paging, tlb and
in a particular order is system dependent and out of the scope of this
manual.
-@item --file-ordering @var{map_file}
+@item -R @var{map_file}
+@itemx --file-ordering @var{map_file}
The @samp{--file-ordering} option causes @code{gprof} to print a
suggested .o link line ordering for the program based on profiling data.
This option suggests an ordering which may improve paging, tlb and
compiler.
@end table
-@node Analysis Options,Miscellaneous Options,Output Options,Invoking
+@node Analysis Options
@section Analysis Options
@table @code
statically declared (private) functions. (These are functions whose
names are not listed as global, and which are not visible outside the
file/function/block where they were defined.) Time spent in these
-functions, calls to/from them, etc, will all be attributed to the
+functions, calls to/from them, etc., will all be attributed to the
function that was loaded directly before it in the executable file.
@c This is compatible with Unix @code{gprof}, but a bad idea.
This option affects both the flat profile and the call graph.
@itemx --line
The @samp{-l} option enables line-by-line profiling, which causes
histogram hits to be charged to individual source code lines,
-instead of functions.
+instead of functions. This feature only works with programs compiled
+by older versions of the @code{gcc} compiler. Newer versions of
+@code{gcc} are designed to work with the @code{gcov} tool instead.
+
If the program was compiled with basic-block counting enabled,
this option will also identify how many times each line of
code was executed.
a program is spending its time, it also significantly increases
the running time of @code{gprof}, and magnifies statistical
inaccuracies.
-@xref{Sampling Error}.
+@xref{Sampling Error, ,Statistical Sampling Error}.
+
+@item --inline-file-names
+This option causes @code{gprof} to print the source file after each
+symbol in both the flat profile and the call graph. The full path to the
+file is printed if used with the @samp{-L} option.
@item -m @var{num}
@itemx --min-count=@var{num}
This option affects execution count output only.
Symbols that are executed less than @var{num} times are suppressed.
-@item -n[@var{symspec}]
-@itemx --time[=@var{symspec}]
+@item -n@var{symspec}
+@itemx --time=@var{symspec}
The @samp{-n} option causes @code{gprof}, in its call graph analysis,
to only propagate times for symbols matching @var{symspec}.
-@item -N[@var{symspec}]
-@itemx --no-time[=@var{symspec}]
+@item -N@var{symspec}
+@itemx --no-time=@var{symspec}
The @samp{-n} option causes @code{gprof}, in its call graph analysis,
not to propagate times for symbols matching @var{symspec}.
+@item -S@var{filename}
+@itemx --external-symbol-table=@var{filename}
+The @samp{-S} option causes @code{gprof} to read an external symbol table
+file, such as @file{/proc/kallsyms}, rather than read the symbol table
+from the given object file (the default is @code{a.out}). This is useful
+for profiling kernel modules.
+
@item -z
@itemx --display-unused-functions
If you give the @samp{-z} option, @code{gprof} will mention all
@end table
-@node Miscellaneous Options,Deprecated Options,Analysis Options,Invoking
+@node Miscellaneous Options
@section Miscellaneous Options
@table @code
@itemx --debug[=@var{num}]
The @samp{-d @var{num}} option specifies debugging options.
If @var{num} is not specified, enable all debugging.
-@xref{Debugging}.
+@xref{Debugging, ,Debugging @code{gprof}}.
+
+@item -h
+@itemx --help
+The @samp{-h} option prints command line usage.
@item -O@var{name}
@itemx --file-format=@var{name}
@end table
-@node Deprecated Options,Symspecs,Miscellaneous Options,Invoking
+@node Deprecated Options
@section Deprecated Options
-@table @code
-
These options have been replaced with newer versions that use symspecs.
+@table @code
+
@item -e @var{function_name}
The @samp{-e @var{function}} option tells @code{gprof} to not print
information about the function @var{function_name} (and its
@end table
+@c man end
+
Note that only one function can be specified with each @code{-e},
@code{-E}, @code{-f} or @code{-F} option. To specify more than one
function, use multiple options. For example, this command:
lists in the call graph all functions that were reached from either
@code{foo} or @code{bar} and were not reachable from @code{boring}.
-@node Symspecs,,Deprecated Options,Invoking
+@node Symspecs
@section Symspecs
Many of the output options allow functions to be included or excluded
styles (file information, execution count, and function and file ordering)
are not described here, but are documented with the respective options
that trigger them.
-@xref{Output Options}.
+@xref{Output Options, ,Output Options}.
@menu
* Flat Profile:: The flat profile shows how much time was spent
@end menu
-@node Flat Profile,Call Graph,,Output
+@node Flat Profile
@section The Flat Profile
@cindex flat profile
@end smallexample
@noindent
-The functions are sorted by first by decreasing run-time spent in them,
+The functions are sorted first by decreasing run-time spent in them,
then by decreasing number of calls, then alphabetically by name. The
functions @samp{mcount} and @samp{profil} are part of the profiling
apparatus and appear in every flat profile; their time gives a measure of
In another run,
the @samp{self seconds} field for
@samp{mcount} might well be @samp{0.00} or @samp{0.02}.
-@xref{Sampling Error}, for a complete discussion.
+@xref{Sampling Error, ,Statistical Sampling Error},
+for a complete discussion.
The remaining functions in the listing (those whose
@samp{self seconds} field is @samp{0.00}) didn't appear
fields are sorted.
@end table
-@node Call Graph,Line-by-line,Flat Profile,Output
+@node Call Graph
@section The Call Graph
@cindex call graph
Here is a sample call from a small program. This call came from the
same @code{gprof} run as the flat profile example in the previous
-chapter.
+section.
@smallexample
@group
0.00 0.00 8/8 chewtime [24]
0.00 0.00 8/16 skipspace [44]
-----------------------------------------------
-[4] 59.8 0.01 0.02 8+472 <cycle 2 as a whole> [4]
+[4] 59.8 0.01 0.02 8+472 <cycle 2 as a whole> [4]
0.01 0.02 244+260 offtime <cycle 2> [7]
0.00 0.00 236+1 tzset <cycle 2> [26]
-----------------------------------------------
The entries are sorted by time spent in the function and its subroutines.
-The internal profiling function @code{mcount} (@pxref{Flat Profile})
-is never mentioned in the call graph.
+The internal profiling function @code{mcount} (@pxref{Flat Profile, ,The
+Flat Profile}) is never mentioned in the call graph.
@menu
* Primary:: Details of the primary line's contents.
If the function is part of a cycle of recursion, the cycle number is
printed between the function's name and the index number
-(@pxref{Cycles}). For example, if function @code{gnurr} is part of
+(@pxref{Cycles, ,How Mutually Recursive Functions Are Described}).
+For example, if function @code{gnurr} is part of
cycle number one, and has index number twelve, its primary line would
be end like this:
@end example
@end table
-@node Callers, Subroutines, Primary, Call Graph
+@node Callers
@subsection Lines for a Function's Callers
A function's entry has a line for each function it was called by.
@c What if some calls have determinable callers' names but not all?
@c FIXME - still relevant?
-@node Subroutines, Cycles, Callers, Call Graph
+@node Subroutines
@subsection Lines for a Function's Subroutines
A function's entry has a line for each of its subroutines---in other
followed by the total number of non-recursive calls to @code{report}.
This ratio is used to determine how much of @code{report}'s @code{self}
and @code{children} time gets credited to @code{main}.
-@xref{Assumptions}.
+@xref{Assumptions, ,Estimating @code{children} Times}.
@item name
The name of the subroutine of @code{main} to which this line applies,
printed between the name and the index number.
@end table
-@node Cycles,, Subroutines, Call Graph
+@node Cycles
@subsection How Mutually Recursive Functions Are Described
@cindex cycle
@cindex recursion cycle
the amount of time spent @emph{in the whole cycle}, and its other
subroutines, on the times when that caller called a function in the cycle.
-The @code{calls} field in the primary line for the cycle has two numbers:
+The @code{called} field in the primary line for the cycle has two numbers:
first, the number of times functions in the cycle were called by functions
outside the cycle; second, the number of times they were called by
functions in the cycle (including times when a function in the cycle calls
itself). This is a generalization of the usual split into non-recursive and
recursive calls.
-The @code{calls} field of a subroutine-line for a cycle member in the
+The @code{called} field of a subroutine-line for a cycle member in the
cycle's entry says how many time that function was called from functions in
the cycle. The total of all these is the second number in the primary line's
-@code{calls} field.
+@code{called} field.
In the individual entry for a function in a cycle, the other functions in
the same cycle can appear as subroutines and as callers. These lines show
lines are blank because of the difficulty of defining meanings for them
when recursion is going on.
-@node Line-by-line,Annotated Source,Call Graph,Output
+@node Line-by-line
@section Line-by-line Profiling
@code{gprof}'s @samp{-l} option causes the program to perform
@dfn{line-by-line} profiling. In this mode, histogram
samples are assigned not to functions, but to individual
-lines of source code. The program usually must be compiled
-with a @samp{-g} option, in addition to @samp{-pg}, in order
+lines of source code. This only works with programs compiled with
+older versions of the @code{gcc} compiler. Newer versions of @code{gcc}
+use a different program - @code{gcov} - to display line-by-line
+profiling information.
+
+With the older versions of @code{gcc} the program usually has to be
+compiled with a @samp{-g} option, in addition to @samp{-pg}, in order
to generate debugging symbols for tracking source code lines.
+Note, in much older versions of @code{gcc} the program had to be
+compiled with the @samp{-a} command line option as well.
The flat profile is the most useful output table
in line-by-line mode.
Now let's look at some of @code{gprof}'s output from the same program run,
this time with line-by-line profiling enabled. Note that @code{ct_init}'s
-four histogram hits are broken down into four lines of source code - one hit
+four histogram hits are broken down into four lines of source code---one hit
occurred on each of lines 349, 351, 382 and 385. In the call graph,
note how
@code{ct_init}'s 13327 calls to @code{init_block} are broken down
@end smallexample
-@node Annotated Source,,Line-by-line,Output
+@node Annotated Source
@section The Annotated Source Listing
@code{gprof}'s @samp{-A} option triggers an annotated source listing,
number of times it was called. You may also need to specify the
@samp{-I} option, if @code{gprof} can't find the source code files.
-Compiling with @samp{gcc @dots{} -g -pg -a} augments your program
-with basic-block counting code, in addition to function counting code.
-This enables @code{gprof} to determine how many times each line
-of code was executed.
+With older versions of @code{gcc} compiling with @samp{gcc @dots{} -g
+-pg -a} augments your program with basic-block counting code, in
+addition to function counting code. This enables @code{gprof} to
+determine how many times each line of code was executed. With newer
+versions of @code{gcc} support for displaying basic-block counts is
+provided by the @code{gcov} program.
+
For example, consider the following function, taken from gzip,
with line numbers added:
basic-blocks to handle various special cases.
A program augmented for basic-block counting can be analyzed with
-@samp{gprof -l -A}. I also suggest use of the @samp{-x} option,
-which ensures that each line of code is labeled at least once.
+@samp{gprof -l -A}.
+The @samp{-x} option is also helpful,
+to ensure that each line of code is labeled at least once.
Here is @code{updcrc}'s
annotated source listing for a sample @code{gzip} run:
static ulg crc = (ulg)0xffffffffL;
2 -> if (s == NULL) @{
- 1 -> c = 0xffffffffL;
+ 1 -> c = 0xffffffffL;
1 -> @} else @{
- 1 -> c = crc;
+ 1 -> c = crc;
1 -> if (n) do @{
26312 -> c = crc_32_tab[...];
26312,1,26311 -> @} while (--n);
* Assumptions:: Estimating children times
@end menu
-@node Sampling Error,Assumptions,,Inaccuracy
+@node Sampling Error
@section Statistical Sampling Error
The run-time figures that @code{gprof} gives you are based on a sampling
ought to catch that function in the act only once, there is a pretty good
chance it will actually find that function zero times, or twice.
-By contrast, the number-of-calls and basic-block figures
-are derived by counting, not
-sampling. They are completely accurate and will not vary from run to run
-if your program is deterministic.
+By contrast, the number-of-calls and basic-block figures are derived
+by counting, not sampling. They are completely accurate and will not
+vary from run to run if your program is deterministic and single
+threaded. In multi-threaded applications, or single threaded
+applications that link with multi-threaded libraries, the counts are
+only deterministic if the counting function is thread-safe. (Note:
+beware that the mcount counting function in glibc is @emph{not}
+thread-safe). @xref{Implementation, ,Implementation of Profiling}.
The @dfn{sampling period} that is printed at the beginning of the flat
profile says how often samples are taken. The rule of thumb is that a
@end example
@end enumerate
-@node Assumptions,,Sampling Error,Inaccuracy
+@node Assumptions
@section Estimating @code{children} Times
Some of the figures in the call graph are estimates---for example, the
-@code{children} time values and all the the time figures in caller and
+@code{children} time values and all the time figures in caller and
subroutine lines.
There is no direct information about these measurements in the profile
@c FIXME - has this been fixed?
We hope some day to put more complete data into @file{gmon.out}, so that
this assumption is no longer needed, if we can figure out how. For the
-nonce, the estimated figures are usually more useful than misleading.
+novice, the estimated figures are usually more useful than misleading.
@node How do I?
@chapter Answers to Common Questions
@table @asis
-@item How do I find which lines in my program were executed the most times?
+@item How can I get more exact information about hot spots in my program?
-Compile your program with basic-block counting enabled, run it, then
-use the following pipeline:
+Looking at the per-line call counts only tells part of the story.
+Because @code{gprof} can only report call times and counts by function,
+the best way to get finer-grained information on where the program
+is spending its time is to re-factor large functions into sequences
+of calls to smaller ones. Beware however that this can introduce
+artificial hot spots since compiling with @samp{-pg} adds a significant
+overhead to function calls. An alternative solution is to use a
+non-intrusive profiler, e.g.@: oprofile.
-@example
-gprof -l -C @var{objfile} | sort -k 3 -n -r
-@end example
+@item How do I find which lines in my program were executed the most times?
-This listing will show you the lines in your code executed most often,
-but not necessarily those that consumed the most time.
+Use the @code{gcov} program.
@item How do I find which lines in my program called a particular function?
@end example
If your program is completely deterministic, all the call counts
-will be simple multiples of 100 (i.e. a function called once in
+will be simple multiples of 100 (i.e., a function called once in
each run will appear with a call count of 100).
@end table
for basic-block execution counts and non-realtime histograms. A magic
cookie and version number allows @code{gprof} to easily identify
new style files. Old BSD-style files can still be read.
-@xref{File Format}.
+@xref{File Format, ,Profiling Data File Format}.
@item
For a recursive function, Unix @code{gprof} lists the function as a
* Debugging:: Using @code{gprof}'s @samp{-d} option
@end menu
-@node Implementation,File Format,,Details
+@node Implementation
@section Implementation of Profiling
Profiling works by changing how every function in your program is compiled
itself is typically a short assembly-language stub routine
that extracts the required
information, and then calls @code{__mcount_internal}
-(a normal C function) with two arguments - @code{frompc} and @code{selfpc}.
+(a normal C function) with two arguments---@code{frompc} and @code{selfpc}.
@code{__mcount_internal} is responsible for maintaining
the in-memory call graph, which records @code{frompc}, @code{selfpc},
and the number of times each of these call arcs was traversed.
is also enabled. Each object file is then compiled with a static array
of counts, initially zero.
In the executable code, every time a new basic-block begins
-(i.e. when an @code{if} statement appears), an extra instruction
+(i.e., when an @code{if} statement appears), an extra instruction
is inserted to increment the corresponding count in the array.
At compile time, a paired array was constructed that recorded
the starting address of each basic-block. Taken together,
the other hand, sampling by run time has the advantage that the amount of
load due to other users won't directly affect the output you get.
-@node File Format,Internals,Implementation,Details
+@node File Format
@section Profiling Data File Format
The old BSD-derived file format used for profile data does not contain a
The new file format is defined in header file @file{gmon_out.h}. It
consists of a header containing the magic cookie and a version number,
as well as some spare bytes available for future extensions. All data
-in a profile data file is in the native format of the host on which
-the profile was collected. @sc{gnu} @code{gprof} adapts automatically to the
-byte-order in use.
+in a profile data file is in the native format of the target for which
+the profile was collected. @sc{gnu} @code{gprof} adapts automatically
+to the byte-order in use.
In the new file format, the header is followed by a sequence of
records. Currently, there are three different record types: histogram
physical dimension is specified in two parts: a long name of up to 15
characters and a single character abbreviation. For example, a
histogram representing real-time would specify the long name as
-"seconds" and the abbreviation as "s". This feature is useful for
+``seconds'' and the abbreviation as ``s''. This feature is useful for
architectures that support performance monitor hardware (which,
fortunately, is becoming increasingly common). For example, under DEC
-OSF/1, the "uprofile" command can be used to produce a histogram of,
+OSF/1, the ``uprofile'' command can be used to produce a histogram of,
say, instruction cache misses. In this case, the dimension in the
-histogram header could be set to "i-cache misses" and the abbreviation
-could be set to "1" (because it is simply a count, not a physical
+histogram header could be set to ``i-cache misses'' and the abbreviation
+could be set to ``1'' (because it is simply a count, not a physical
dimension). Also, the profiling rate would have to be set to 1 in
this case.
that basic-block was executed. Any address within the basic-address can
be used.
-@node Internals,Debugging,File Format,Details
+@node Internals
@section @code{gprof}'s Internal Operation
Like most programs, @code{gprof} begins by processing its options.
During this stage, it may building its symspec list
-(@code{sym_ids.c:sym_id_add}), if
+(@code{sym_ids.c:@-sym_id_add}), if
options are specified which use symspecs.
@code{gprof} maintains a single linked list of symspecs,
which will eventually get turned into 12 symbol tables,
-organized into six include/exclude pairs - one
+organized into six include/exclude pairs---one
pair each for the flat profile (INCL_FLAT/EXCL_FLAT),
the call graph arcs (INCL_ARCS/EXCL_ARCS),
printing in the call graph (INCL_GRAPH/EXCL_GRAPH),
Next, the BFD library is called to open the object file,
verify that it is an object file,
-and read its symbol table (@code{core.c:core_init}),
+and read its symbol table (@code{core.c:@-core_init}),
using @code{bfd_canonicalize_symtab} after mallocing
an appropriately sized array of symbols. At this point,
function mappings are read (if the @samp{--file-ordering} option
text space address is examined, and a new symbol table entry
gets created every time the line number changes.
In either case, two passes are made through the symbol
-table - one to count the size of the symbol table required,
+table---one to count the size of the symbol table required,
and the other to actually read the symbols. In between the
two passes, a single array of type @code{Sym} is created of
the appropriate length.
-Finally, @code{symtab.c:symtab_finalize}
+Finally, @code{symtab.c:@-symtab_finalize}
is called to sort the symbol table and remove duplicate entries
(entries with the same memory address).
The symbol table must be a contiguous array for two reasons.
First, the @code{qsort} library function (which sorts an array)
will be used to sort the symbol table.
-Also, the symbol lookup routine (@code{symtab.c:sym_lookup}),
+Also, the symbol lookup routine (@code{symtab.c:@-sym_lookup}),
which finds symbols
based on memory address, uses a binary search algorithm
which requires the symbol table to be a sorted array.
to indicate that it is a local symbol.
With the symbol table read, the symspecs can now be translated
-into Syms (@code{sym_ids.c:sym_id_parse}). Remember that a single
+into Syms (@code{sym_ids.c:@-sym_id_parse}). Remember that a single
symspec can match multiple symbols.
An array of symbol tables
(@code{syms}) is created, each entry of which is a symbol table
in the @code{syms} array.
Now the profile data file(s) themselves are read
-(@code{gmon_io.c:gmon_out_read}),
+(@code{gmon_io.c:@-gmon_out_read}),
first by checking for a new-style @samp{gmon.out} header,
then assuming this is an old-style BSD @samp{gmon.out}
if the magic number test failed.
-New-style histogram records are read by @code{hist.c:hist_read_rec}.
+New-style histogram records are read by @code{hist.c:@-hist_read_rec}.
For the first histogram record, allocate a memory array to hold
all the bins, and read them in.
When multiple profile data files (or files with multiple histogram
-records) are read, the starting address, ending address, number
-of bins and sampling rate must match between the various histograms,
-or a fatal error will result.
-If everything matches, just sum the additional histograms into
-the existing in-memory array.
-
-As each call graph record is read (@code{call_graph.c:cg_read_rec}),
+records) are read, the memory ranges of each pair of histogram records
+must be either equal, or non-overlapping. For each pair of histogram
+records, the resolution (memory region size divided by the number of
+bins) must be the same. The time unit must be the same for all
+histogram records. If the above containts are met, all histograms
+for the same memory range are merged.
+
+As each call graph record is read (@code{call_graph.c:@-cg_read_rec}),
the parent and child addresses
are matched to symbol table entries, and a call graph arc is
-created by @code{cg_arcs.c:arc_add}, unless the arc fails a symspec
+created by @code{cg_arcs.c:@-arc_add}, unless the arc fails a symspec
check against INCL_ARCS/EXCL_ARCS. As each arc is added,
a linked list is maintained of the parent's child arcs, and of the child's
parent arcs.
Both the child's call count and the arc's call count are
incremented by the record's call count.
-Basic-block records are read (@code{basic_blocks.c:bb_read_rec}),
+Basic-block records are read (@code{basic_blocks.c:@-bb_read_rec}),
but only if line-by-line profiling has been selected.
Each basic-block address is matched to a corresponding line
symbol in the symbol table, and an entry made in the symbol's
records are present for the same address, the call counts
are cumulative.
-A gmon.sum file is dumped, if requested (@code{gmon_io.c:gmon_out_write}).
+A gmon.sum file is dumped, if requested (@code{gmon_io.c:@-gmon_out_write}).
If histograms were present in the data files, assign them to symbols
-(@code{hist.c:hist_assign_samples}) by iterating over all the sample
+(@code{hist.c:@-hist_assign_samples}) by iterating over all the sample
bins and assigning them to symbols. Since the symbol table
is sorted in order of ascending memory addresses, we can
simple follow along in the symbol table as we make our pass
cause each of two adjacent lines to be credited with half
a hit, for example.
-If call graph data is present, @code{cg_arcs.c:cg_assemble} is called.
+If call graph data is present, @code{cg_arcs.c:@-cg_assemble} is called.
First, if @samp{-c} was specified, a machine-dependent
routine (@code{find_call}) scans through each symbol's machine code,
looking for subroutine call instructions, and adding them
to the call graph with a zero call count.
A topological sort is performed by depth-first numbering
-all the symbols (@code{cg_dfn.c:cg_dfn}), so that
+all the symbols (@code{cg_dfn.c:@-cg_dfn}), so that
children are always numbered less than their parents,
then making a array of pointers into the symbol table and sorting it into
numerical order, which is reverse topological
new array of pointers is assembled, this time sorted by propagated time.
Finally, print the various outputs the user requested, which is now fairly
-straightforward. The call graph (@code{cg_print.c:cg_print}) and
-flat profile (@code{hist.c:hist_print}) are regurgitations of values
+straightforward. The call graph (@code{cg_print.c:@-cg_print}) and
+flat profile (@code{hist.c:@-hist_print}) are regurgitations of values
already computed. The annotated source listing
-(@code{basic_blocks.c:print_annotated_source}) uses basic-block
+(@code{basic_blocks.c:@-print_annotated_source}) uses basic-block
information, if present, to label each line of code with call counts,
otherwise only the function call counts are presented.
followed by lower use functions, followed by unused functions
at the end.
-@node Debugging,,Internals,Details
-@subsection Debugging @code{gprof}
+@node Debugging
+@section Debugging @code{gprof}
If @code{gprof} was compiled with debugging enabled,
the @samp{-d} option triggers debugging output
@end table
@node GNU Free Documentation License
-@chapter GNU Free Documentation License
-
- GNU Free Documentation License
-
- Version 1.1, March 2000
-
- Copyright (C) 2000 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
-0. PREAMBLE
-
-The purpose of this License is to make a manual, textbook, or other
-written document "free" in the sense of freedom: to assure everyone
-the effective freedom to copy and redistribute it, with or without
-modifying it, either commercially or noncommercially. Secondarily,
-this License preserves for the author and publisher a way to get
-credit for their work, while not being considered responsible for
-modifications made by others.
-
-This License is a kind of "copyleft", which means that derivative
-works of the document must themselves be free in the same sense. It
-complements the GNU General Public License, which is a copyleft
-license designed for free software.
-
-We have designed this License in order to use it for manuals for free
-software, because free software needs free documentation: a free
-program should come with manuals providing the same freedoms that the
-software does. But this License is not limited to software manuals;
-it can be used for any textual work, regardless of subject matter or
-whether it is published as a printed book. We recommend this License
-principally for works whose purpose is instruction or reference.
-
-
-1. APPLICABILITY AND DEFINITIONS
-
-This License applies to any manual or other work that contains a
-notice placed by the copyright holder saying it can be distributed
-under the terms of this License. The "Document", below, refers to any
-such manual or work. Any member of the public is a licensee, and is
-addressed as "you".
-
-A "Modified Version" of the Document means any work containing the
-Document or a portion of it, either copied verbatim, or with
-modifications and/or translated into another language.
-
-A "Secondary Section" is a named appendix or a front-matter section of
-the Document that deals exclusively with the relationship of the
-publishers or authors of the Document to the Document's overall subject
-(or to related matters) and contains nothing that could fall directly
-within that overall subject. (For example, if the Document is in part a
-textbook of mathematics, a Secondary Section may not explain any
-mathematics.) The relationship could be a matter of historical
-connection with the subject or with related matters, or of legal,
-commercial, philosophical, ethical or political position regarding
-them.
-
-The "Invariant Sections" are certain Secondary Sections whose titles
-are designated, as being those of Invariant Sections, in the notice
-that says that the Document is released under this License.
-
-The "Cover Texts" are certain short passages of text that are listed,
-as Front-Cover Texts or Back-Cover Texts, in the notice that says that
-the Document is released under this License.
-
-A "Transparent" copy of the Document means a machine-readable copy,
-represented in a format whose specification is available to the
-general public, whose contents can be viewed and edited directly and
-straightforwardly with generic text editors or (for images composed of
-pixels) generic paint programs or (for drawings) some widely available
-drawing editor, and that is suitable for input to text formatters or
-for automatic translation to a variety of formats suitable for input
-to text formatters. A copy made in an otherwise Transparent file
-format whose markup has been designed to thwart or discourage
-subsequent modification by readers is not Transparent. A copy that is
-not "Transparent" is called "Opaque".
-
-Examples of suitable formats for Transparent copies include plain
-ASCII without markup, Texinfo input format, LaTeX input format, SGML
-or XML using a publicly available DTD, and standard-conforming simple
-HTML designed for human modification. Opaque formats include
-PostScript, PDF, proprietary formats that can be read and edited only
-by proprietary word processors, SGML or XML for which the DTD and/or
-processing tools are not generally available, and the
-machine-generated HTML produced by some word processors for output
-purposes only.
-
-The "Title Page" means, for a printed book, the title page itself,
-plus such following pages as are needed to hold, legibly, the material
-this License requires to appear in the title page. For works in
-formats which do not have any title page as such, "Title Page" means
-the text near the most prominent appearance of the work's title,
-preceding the beginning of the body of the text.
-
-
-2. VERBATIM COPYING
-
-You may copy and distribute the Document in any medium, either
-commercially or noncommercially, provided that this License, the
-copyright notices, and the license notice saying this License applies
-to the Document are reproduced in all copies, and that you add no other
-conditions whatsoever to those of this License. You may not use
-technical measures to obstruct or control the reading or further
-copying of the copies you make or distribute. However, you may accept
-compensation in exchange for copies. If you distribute a large enough
-number of copies you must also follow the conditions in section 3.
-
-You may also lend copies, under the same conditions stated above, and
-you may publicly display copies.
-
-
-3. COPYING IN QUANTITY
-
-If you publish printed copies of the Document numbering more than 100,
-and the Document's license notice requires Cover Texts, you must enclose
-the copies in covers that carry, clearly and legibly, all these Cover
-Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
-the back cover. Both covers must also clearly and legibly identify
-you as the publisher of these copies. The front cover must present
-the full title with all words of the title equally prominent and
-visible. You may add other material on the covers in addition.
-Copying with changes limited to the covers, as long as they preserve
-the title of the Document and satisfy these conditions, can be treated
-as verbatim copying in other respects.
-
-If the required texts for either cover are too voluminous to fit
-legibly, you should put the first ones listed (as many as fit
-reasonably) on the actual cover, and continue the rest onto adjacent
-pages.
-
-If you publish or distribute Opaque copies of the Document numbering
-more than 100, you must either include a machine-readable Transparent
-copy along with each Opaque copy, or state in or with each Opaque copy
-a publicly-accessible computer-network location containing a complete
-Transparent copy of the Document, free of added material, which the
-general network-using public has access to download anonymously at no
-charge using public-standard network protocols. If you use the latter
-option, you must take reasonably prudent steps, when you begin
-distribution of Opaque copies in quantity, to ensure that this
-Transparent copy will remain thus accessible at the stated location
-until at least one year after the last time you distribute an Opaque
-copy (directly or through your agents or retailers) of that edition to
-the public.
-
-It is requested, but not required, that you contact the authors of the
-Document well before redistributing any large number of copies, to give
-them a chance to provide you with an updated version of the Document.
-
-
-4. MODIFICATIONS
-
-You may copy and distribute a Modified Version of the Document under
-the conditions of sections 2 and 3 above, provided that you release
-the Modified Version under precisely this License, with the Modified
-Version filling the role of the Document, thus licensing distribution
-and modification of the Modified Version to whoever possesses a copy
-of it. In addition, you must do these things in the Modified Version:
-
-A. Use in the Title Page (and on the covers, if any) a title distinct
- from that of the Document, and from those of previous versions
- (which should, if there were any, be listed in the History section
- of the Document). You may use the same title as a previous version
- if the original publisher of that version gives permission.
-B. List on the Title Page, as authors, one or more persons or entities
- responsible for authorship of the modifications in the Modified
- Version, together with at least five of the principal authors of the
- Document (all of its principal authors, if it has less than five).
-C. State on the Title page the name of the publisher of the
- Modified Version, as the publisher.
-D. Preserve all the copyright notices of the Document.
-E. Add an appropriate copyright notice for your modifications
- adjacent to the other copyright notices.
-F. Include, immediately after the copyright notices, a license notice
- giving the public permission to use the Modified Version under the
- terms of this License, in the form shown in the Addendum below.
-G. Preserve in that license notice the full lists of Invariant Sections
- and required Cover Texts given in the Document's license notice.
-H. Include an unaltered copy of this License.
-I. Preserve the section entitled "History", and its title, and add to
- it an item stating at least the title, year, new authors, and
- publisher of the Modified Version as given on the Title Page. If
- there is no section entitled "History" in the Document, create one
- stating the title, year, authors, and publisher of the Document as
- given on its Title Page, then add an item describing the Modified
- Version as stated in the previous sentence.
-J. Preserve the network location, if any, given in the Document for
- public access to a Transparent copy of the Document, and likewise
- the network locations given in the Document for previous versions
- it was based on. These may be placed in the "History" section.
- You may omit a network location for a work that was published at
- least four years before the Document itself, or if the original
- publisher of the version it refers to gives permission.
-K. In any section entitled "Acknowledgements" or "Dedications",
- preserve the section's title, and preserve in the section all the
- substance and tone of each of the contributor acknowledgements
- and/or dedications given therein.
-L. Preserve all the Invariant Sections of the Document,
- unaltered in their text and in their titles. Section numbers
- or the equivalent are not considered part of the section titles.
-M. Delete any section entitled "Endorsements". Such a section
- may not be included in the Modified Version.
-N. Do not retitle any existing section as "Endorsements"
- or to conflict in title with any Invariant Section.
-
-If the Modified Version includes new front-matter sections or
-appendices that qualify as Secondary Sections and contain no material
-copied from the Document, you may at your option designate some or all
-of these sections as invariant. To do this, add their titles to the
-list of Invariant Sections in the Modified Version's license notice.
-These titles must be distinct from any other section titles.
-
-You may add a section entitled "Endorsements", provided it contains
-nothing but endorsements of your Modified Version by various
-parties--for example, statements of peer review or that the text has
-been approved by an organization as the authoritative definition of a
-standard.
-
-You may add a passage of up to five words as a Front-Cover Text, and a
-passage of up to 25 words as a Back-Cover Text, to the end of the list
-of Cover Texts in the Modified Version. Only one passage of
-Front-Cover Text and one of Back-Cover Text may be added by (or
-through arrangements made by) any one entity. If the Document already
-includes a cover text for the same cover, previously added by you or
-by arrangement made by the same entity you are acting on behalf of,
-you may not add another; but you may replace the old one, on explicit
-permission from the previous publisher that added the old one.
-
-The author(s) and publisher(s) of the Document do not by this License
-give permission to use their names for publicity for or to assert or
-imply endorsement of any Modified Version.
-
-
-5. COMBINING DOCUMENTS
-
-You may combine the Document with other documents released under this
-License, under the terms defined in section 4 above for modified
-versions, provided that you include in the combination all of the
-Invariant Sections of all of the original documents, unmodified, and
-list them all as Invariant Sections of your combined work in its
-license notice.
-
-The combined work need only contain one copy of this License, and
-multiple identical Invariant Sections may be replaced with a single
-copy. If there are multiple Invariant Sections with the same name but
-different contents, make the title of each such section unique by
-adding at the end of it, in parentheses, the name of the original
-author or publisher of that section if known, or else a unique number.
-Make the same adjustment to the section titles in the list of
-Invariant Sections in the license notice of the combined work.
-
-In the combination, you must combine any sections entitled "History"
-in the various original documents, forming one section entitled
-"History"; likewise combine any sections entitled "Acknowledgements",
-and any sections entitled "Dedications". You must delete all sections
-entitled "Endorsements."
-
-
-6. COLLECTIONS OF DOCUMENTS
-
-You may make a collection consisting of the Document and other documents
-released under this License, and replace the individual copies of this
-License in the various documents with a single copy that is included in
-the collection, provided that you follow the rules of this License for
-verbatim copying of each of the documents in all other respects.
-
-You may extract a single document from such a collection, and distribute
-it individually under this License, provided you insert a copy of this
-License into the extracted document, and follow this License in all
-other respects regarding verbatim copying of that document.
-
-
-7. AGGREGATION WITH INDEPENDENT WORKS
-
-A compilation of the Document or its derivatives with other separate
-and independent documents or works, in or on a volume of a storage or
-distribution medium, does not as a whole count as a Modified Version
-of the Document, provided no compilation copyright is claimed for the
-compilation. Such a compilation is called an "aggregate", and this
-License does not apply to the other self-contained works thus compiled
-with the Document, on account of their being thus compiled, if they
-are not themselves derivative works of the Document.
-
-If the Cover Text requirement of section 3 is applicable to these
-copies of the Document, then if the Document is less than one quarter
-of the entire aggregate, the Document's Cover Texts may be placed on
-covers that surround only the Document within the aggregate.
-Otherwise they must appear on covers around the whole aggregate.
-
-
-8. TRANSLATION
-
-Translation is considered a kind of modification, so you may
-distribute translations of the Document under the terms of section 4.
-Replacing Invariant Sections with translations requires special
-permission from their copyright holders, but you may include
-translations of some or all Invariant Sections in addition to the
-original versions of these Invariant Sections. You may include a
-translation of this License provided that you also include the
-original English version of this License. In case of a disagreement
-between the translation and the original English version of this
-License, the original English version will prevail.
-
-
-9. TERMINATION
-
-You may not copy, modify, sublicense, or distribute the Document except
-as expressly provided for under this License. Any other attempt to
-copy, modify, sublicense or distribute the Document is void, and will
-automatically terminate your rights under this License. However,
-parties who have received copies, or rights, from you under this
-License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-
-10. FUTURE REVISIONS OF THIS LICENSE
-
-The Free Software Foundation may publish new, revised versions
-of the GNU Free Documentation License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns. See
-http://www.gnu.org/copyleft/.
-
-Each version of the License is given a distinguishing version number.
-If the Document specifies that a particular numbered version of this
-License "or any later version" applies to it, you have the option of
-following the terms and conditions either of that specified version or
-of any later version that has been published (not as a draft) by the
-Free Software Foundation. If the Document does not specify a version
-number of this License, you may choose any version ever published (not
-as a draft) by the Free Software Foundation.
-
-
-ADDENDUM: How to use this License for your documents
-
-To use this License in a document you have written, include a copy of
-the License in the document and put the following copyright and
-license notices just after the title page:
+@appendix GNU Free Documentation License
+@include fdl.texi
-@smallexample
- Copyright (c) YEAR YOUR NAME.
- Permission is granted to copy, distribute and/or modify this document
- under the terms of the GNU Free Documentation License, Version 1.1
- or any later version published by the Free Software Foundation;
- with the Invariant Sections being LIST THEIR TITLES, with the
- Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
- A copy of the license is included in the section entitled "GNU
- Free Documentation License".
-@end smallexample
-
-If you have no Invariant Sections, write "with no Invariant Sections"
-instead of saying which ones are invariant. If you have no
-Front-Cover Texts, write "no Front-Cover Texts" instead of
-"Front-Cover Texts being LIST"; likewise for Back-Cover Texts.
-
-If your document contains nontrivial examples of program code, we
-recommend releasing these examples in parallel under your choice of
-free software license, such as the GNU General Public License,
-to permit their use in free software.
-
-@contents
@bye
NEEDS AN INDEX