#include <linux/fb.h>
#include <linux/hdmi.h>
#include <drm/drm_mode.h>
-
#include <drm/drm_fourcc.h>
struct drm_device;
uint64_t values[DRM_OBJECT_MAX_PROPERTY];
};
-/*
- * Note on terminology: here, for brevity and convenience, we refer to connector
- * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS,
- * DVI, etc. And 'screen' refers to the whole of the visible display, which
- * may span multiple monitors (and therefore multiple CRTC and connector
- * structures).
- */
-
-enum drm_mode_status {
- MODE_OK = 0, /* Mode OK */
- MODE_HSYNC, /* hsync out of range */
- MODE_VSYNC, /* vsync out of range */
- MODE_H_ILLEGAL, /* mode has illegal horizontal timings */
- MODE_V_ILLEGAL, /* mode has illegal horizontal timings */
- MODE_BAD_WIDTH, /* requires an unsupported linepitch */
- MODE_NOMODE, /* no mode with a matching name */
- MODE_NO_INTERLACE, /* interlaced mode not supported */
- MODE_NO_DBLESCAN, /* doublescan mode not supported */
- MODE_NO_VSCAN, /* multiscan mode not supported */
- MODE_MEM, /* insufficient video memory */
- MODE_VIRTUAL_X, /* mode width too large for specified virtual size */
- MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */
- MODE_MEM_VIRT, /* insufficient video memory given virtual size */
- MODE_NOCLOCK, /* no fixed clock available */
- MODE_CLOCK_HIGH, /* clock required is too high */
- MODE_CLOCK_LOW, /* clock required is too low */
- MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */
- MODE_BAD_HVALUE, /* horizontal timing was out of range */
- MODE_BAD_VVALUE, /* vertical timing was out of range */
- MODE_BAD_VSCAN, /* VScan value out of range */
- MODE_HSYNC_NARROW, /* horizontal sync too narrow */
- MODE_HSYNC_WIDE, /* horizontal sync too wide */
- MODE_HBLANK_NARROW, /* horizontal blanking too narrow */
- MODE_HBLANK_WIDE, /* horizontal blanking too wide */
- MODE_VSYNC_NARROW, /* vertical sync too narrow */
- MODE_VSYNC_WIDE, /* vertical sync too wide */
- MODE_VBLANK_NARROW, /* vertical blanking too narrow */
- MODE_VBLANK_WIDE, /* vertical blanking too wide */
- MODE_PANEL, /* exceeds panel dimensions */
- MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
- MODE_ONE_WIDTH, /* only one width is supported */
- MODE_ONE_HEIGHT, /* only one height is supported */
- MODE_ONE_SIZE, /* only one resolution is supported */
- MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */
- MODE_NO_STEREO, /* stereo modes not supported */
- MODE_UNVERIFIED = -3, /* mode needs to reverified */
- MODE_BAD = -2, /* unspecified reason */
- MODE_ERROR = -1 /* error condition */
-};
-
-#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
- DRM_MODE_TYPE_CRTC_C)
-
-#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
- .name = nm, .status = 0, .type = (t), .clock = (c), \
- .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
- .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
- .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
- .vscan = (vs), .flags = (f), \
- .base.type = DRM_MODE_OBJECT_MODE
-
-#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */
-#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
-
-#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
-
-struct drm_display_mode {
- /* Header */
- struct list_head head;
- struct drm_mode_object base;
-
- char name[DRM_DISPLAY_MODE_LEN];
-
- enum drm_mode_status status;
- unsigned int type;
-
- /* Proposed mode values */
- int clock; /* in kHz */
- int hdisplay;
- int hsync_start;
- int hsync_end;
- int htotal;
- int hskew;
- int vdisplay;
- int vsync_start;
- int vsync_end;
- int vtotal;
- int vscan;
- unsigned int flags;
-
- /* Addressable image size (may be 0 for projectors, etc.) */
- int width_mm;
- int height_mm;
-
- /* Actual mode we give to hw */
- int crtc_clock; /* in KHz */
- int crtc_hdisplay;
- int crtc_hblank_start;
- int crtc_hblank_end;
- int crtc_hsync_start;
- int crtc_hsync_end;
- int crtc_htotal;
- int crtc_hskew;
- int crtc_vdisplay;
- int crtc_vblank_start;
- int crtc_vblank_end;
- int crtc_vsync_start;
- int crtc_vsync_end;
- int crtc_vtotal;
-
- /* Driver private mode info */
- int private_size;
- int *private;
- int private_flags;
-
- int vrefresh; /* in Hz */
- int hsync; /* in kHz */
- enum hdmi_picture_aspect picture_aspect_ratio;
+enum drm_connector_force {
+ DRM_FORCE_UNSPECIFIED,
+ DRM_FORCE_OFF,
+ DRM_FORCE_ON, /* force on analog part normally */
+ DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
};
-static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode)
-{
- return mode->flags & DRM_MODE_FLAG_3D_MASK;
-}
+#include <drm/drm_modes.h>
enum drm_connector_status {
connector_status_connected = 1,
void *helper_private;
};
-enum drm_connector_force {
- DRM_FORCE_UNSPECIFIED,
- DRM_FORCE_OFF,
- DRM_FORCE_ON, /* force on analog part normally */
- DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
-};
-
/* should we poll this connector for connects and disconnects */
/* hot plug detectable */
#define DRM_CONNECTOR_POLL_HPD (1 << 0)
struct i2c_adapter *adapter);
extern struct edid *drm_edid_duplicate(const struct edid *edid);
extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
-extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
-extern void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src);
-extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
- const struct drm_display_mode *mode);
-extern void drm_mode_debug_printmodeline(const struct drm_display_mode *mode);
extern void drm_mode_config_init(struct drm_device *dev);
extern void drm_mode_config_reset(struct drm_device *dev);
extern void drm_mode_config_cleanup(struct drm_device *dev);
-extern void drm_mode_set_name(struct drm_display_mode *mode);
-extern bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2);
-extern bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2);
-extern int drm_mode_width(const struct drm_display_mode *mode);
-extern int drm_mode_height(const struct drm_display_mode *mode);
-
-/* for us by fb module */
-extern struct drm_display_mode *drm_mode_create(struct drm_device *dev);
-extern void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
-extern void drm_mode_validate_size(struct drm_device *dev,
- struct list_head *mode_list,
- int maxX, int maxY, int maxPitch);
-extern void drm_mode_prune_invalid(struct drm_device *dev,
- struct list_head *mode_list, bool verbose);
-extern void drm_mode_sort(struct list_head *mode_list);
-extern int drm_mode_hsync(const struct drm_display_mode *mode);
-extern int drm_mode_vrefresh(const struct drm_display_mode *mode);
-extern void drm_mode_set_crtcinfo(struct drm_display_mode *p,
- int adjust_flags);
-extern void drm_mode_connector_list_update(struct drm_connector *connector);
+
extern int drm_mode_connector_update_edid_property(struct drm_connector *connector,
struct edid *edid);
extern int drm_object_property_set_value(struct drm_mode_object *obj,
extern bool drm_rgb_quant_range_selectable(struct edid *edid);
extern int drm_mode_page_flip_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
-extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
- int hdisplay, int vdisplay, int vrefresh,
- bool reduced, bool interlaced, bool margins);
-extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
- int hdisplay, int vdisplay, int vrefresh,
- bool interlaced, int margins);
-extern struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
- int hdisplay, int vdisplay, int vrefresh,
- bool interlaced, int margins, int GTF_M,
- int GTF_2C, int GTF_K, int GTF_2J);
extern int drm_add_modes_noedid(struct drm_connector *connector,
int hdisplay, int vdisplay);
extern void drm_set_preferred_mode(struct drm_connector *connector,
projects / deliverable / linux.git / blobdiff