libata: add command name parsing for error output

[deliverable/linux.git] / include / linux / ata.h

diff --git a/include/linux/ata.h b/include/linux/ata.h
index f5494050df83954f4a1f0901596a4ded4a3d8733..6299a259ed19ff371fecba9f62bd8daa2bff5c79 100644 (file)
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -210,15 +210,25 @@ enum {
        ATA_CMD_STANDBY         = 0xE2, /* place in standby power mode */
        ATA_CMD_IDLE            = 0xE3, /* place in idle power mode */
        ATA_CMD_EDD             = 0x90, /* execute device diagnostic */
+       ATA_CMD_DOWNLOAD_MICRO  = 0x92,
+       ATA_CMD_NOP             = 0x00,
        ATA_CMD_FLUSH           = 0xE7,
        ATA_CMD_FLUSH_EXT       = 0xEA,
        ATA_CMD_ID_ATA          = 0xEC,
        ATA_CMD_ID_ATAPI        = 0xA1,
+       ATA_CMD_SERVICE         = 0xA2,
        ATA_CMD_READ            = 0xC8,
        ATA_CMD_READ_EXT        = 0x25,
+       ATA_CMD_READ_QUEUED     = 0x26,
+       ATA_CMD_READ_STREAM_EXT = 0x2B,
+       ATA_CMD_READ_STREAM_DMA_EXT = 0x2A,
        ATA_CMD_WRITE           = 0xCA,
        ATA_CMD_WRITE_EXT       = 0x35,
+       ATA_CMD_WRITE_QUEUED    = 0x36,
+       ATA_CMD_WRITE_STREAM_EXT = 0x3B,
+       ATA_CMD_WRITE_STREAM_DMA_EXT = 0x3A,
        ATA_CMD_WRITE_FUA_EXT   = 0x3D,
+       ATA_CMD_WRITE_QUEUED_FUA_EXT = 0x3E,
        ATA_CMD_FPDMA_READ      = 0x60,
        ATA_CMD_FPDMA_WRITE     = 0x61,
        ATA_CMD_PIO_READ        = 0x20,
@@ -235,6 +245,7 @@ enum {
        ATA_CMD_PACKET          = 0xA0,
        ATA_CMD_VERIFY          = 0x40,
        ATA_CMD_VERIFY_EXT      = 0x42,
+       ATA_CMD_WRITE_UNCORR_EXT = 0x45,
        ATA_CMD_STANDBYNOW1     = 0xE0,
        ATA_CMD_IDLEIMMEDIATE   = 0xE1,
        ATA_CMD_SLEEP           = 0xE6,
@@ -243,15 +254,34 @@ enum {
        ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
        ATA_CMD_SET_MAX         = 0xF9,
        ATA_CMD_SET_MAX_EXT     = 0x37,
-       ATA_CMD_READ_LOG_EXT    = 0x2f,
+       ATA_CMD_READ_LOG_EXT    = 0x2F,
+       ATA_CMD_WRITE_LOG_EXT   = 0x3F,
+       ATA_CMD_READ_LOG_DMA_EXT = 0x47,
+       ATA_CMD_WRITE_LOG_DMA_EXT = 0x57,
+       ATA_CMD_TRUSTED_RCV     = 0x5C,
+       ATA_CMD_TRUSTED_RCV_DMA = 0x5D,
+       ATA_CMD_TRUSTED_SND     = 0x5E,
+       ATA_CMD_TRUSTED_SND_DMA = 0x5F,
        ATA_CMD_PMP_READ        = 0xE4,
        ATA_CMD_PMP_WRITE       = 0xE8,
        ATA_CMD_CONF_OVERLAY    = 0xB1,
+       ATA_CMD_SEC_SET_PASS    = 0xF1,
+       ATA_CMD_SEC_UNLOCK      = 0xF2,
+       ATA_CMD_SEC_ERASE_PREP  = 0xF3,
+       ATA_CMD_SEC_ERASE_UNIT  = 0xF4,
        ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
+       ATA_CMD_SEC_DISABLE_PASS = 0xF6,
+       ATA_CMD_CONFIG_STREAM   = 0x51,
        ATA_CMD_SMART           = 0xB0,
        ATA_CMD_MEDIA_LOCK      = 0xDE,
        ATA_CMD_MEDIA_UNLOCK    = 0xDF,
        ATA_CMD_DSM             = 0x06,
+       ATA_CMD_CHK_MED_CRD_TYP = 0xD1,
+       ATA_CMD_CFA_REQ_EXT_ERR = 0x03,
+       ATA_CMD_CFA_WRITE_NE    = 0x38,
+       ATA_CMD_CFA_TRANS_SECT  = 0x87,
+       ATA_CMD_CFA_ERASE       = 0xC0,
+       ATA_CMD_CFA_WRITE_MULT_NE = 0xCD,
        /* marked obsolete in the ATA/ATAPI-7 spec */
        ATA_CMD_RESTORE         = 0x10,