+Mon Feb 2 17:10:38 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
+
+ * tic30.h: New file.
+
+start-sanitize-sky
+Wed Jan 28 09:52:31 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * dvp.h: New file.
+
+end-sanitize-sky
+Thu Jan 22 17:54:56 1998 Nick Clifton <nickc@cygnus.com>
+
+ * cgen.h: Add prototypes for cgen_save_fixups(),
+ cgen_restore_fixups(), and cgen_swap_fixups(). Change prototype
+ of cgen_asm_finish_insn() to return a char *.
+
+Wed Jan 14 17:21:43 1998 Nick Clifton <nickc@cygnus.com>
+
+ * cgen.h: Formatting changes to improve readability.
+
+Mon Jan 12 11:37:36 1998 Doug Evans <devans@seba.cygnus.com>
+
+ * cgen.h (*): Clean up pass over `struct foo' usage.
+ (CGEN_ATTR): Make unsigned char.
+ (CGEN_ATTR_TYPE): Update.
+ (CGEN_ATTR_{ENTRY,TABLE}): New types.
+ (cgen_base): Move member `attrs' to cgen_insn.
+ (CGEN_KEYWORD): New member `null_entry'.
+ (CGEN_{SYNTAX,FORMAT}): New types.
+ (cgen_insn): Format and syntax separated from each other.
+
+start-sanitize-d30v
+Tue Dec 16 15:15:52 1997 Michael Meissner <meissner@cygnus.com>
+
+ * d30v.h (d30v_opcode): Reorder flags somewhat, add new flags for
+ 2 word load/store, ADDppp/SUBppp, 16/32 bit multiply. Make
+ flags_{used,set} long.
+ (d30v_operand): Make flags field long.
+
+end-sanitize-d30v
+Mon Dec 1 12:24:44 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+
+ * m68k.h: Fix comment describing operand types.
+
+start-sanitize-d30v
+Sun Nov 23 22:31:27 1997 Michael Meissner <meissner@cygnus.com>
+
+ * d30v.h (SHORT_CMPU): Add case for cmpu instruction, and move
+ everything else after down.
+
+end-sanitize-d30v
+Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * d10v.h (OPERAND_FLAG): Split into:
+ (OPERAND_FFLAG, OPERAND_CFLAG) .
+
+Thu Nov 13 11:04:24 1997 Gavin Koch <gavin@cygnus.com>
+
+ * mips.h (struct mips_opcode): Changed comments to reflect new
+ field usage.
+
+start-sanitize-tx49
+Wed Oct 29 17:33:37 1997 Gavin Koch <gavin@cygnus.com>
+
+ * mips.h (INSN_4900): Added.
+
+end-sanitize-tx49
+Fri Oct 24 22:36:20 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ * mips.h: Added to comments a quick-ref list of all assigned
+ operand type characters.
+ (OP_{MASK,SH}_PERFREG): New macros.
+start-sanitize-vr5400
+ (OP_{MASK,SH}_{VECBYTE,VECALIGN}): New macros for VR5400
+ support.
+end-sanitize-vr5400
+
+Wed Oct 22 17:28:33 1997 Richard Henderson <rth@cygnus.com>
+
+ * sparc.h: Add '_' and '/' for v9a asr's.
+ Patch from David Miller <davem@vger.rutgers.edu>
+
+Tue Oct 14 13:22:29 1997 Jeffrey A Law (law@cygnus.com)
+
+ * h8300.h: Bit ops with absolute addresses not in the 8 bit
+ area are not available in the base model (H8/300).
+
+Thu Sep 25 13:03:41 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k.h: Remove documentation of ` operand specifier.
+
+Wed Sep 24 19:00:34 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k.h: Document q and v operand specifiers.
+
+Mon Sep 15 18:28:37 1997 Nick Clifton <nickc@cygnus.com>
+
+ * v850.h (struct v850_opcode): Add processors field.
+ (PROCESSOR_V850, PROCESSOR_ALL): New bit constants.
+start-sanitize-v850e
+ (PROCESSOR_V850E, PROCESSOR_NOT_V850): New bit constants.
+ (PROCESSOR_V850EA): New bit constants.
+end-sanitize-v850e
+
+start-sanitize-d30v
+Mon Sep 15 11:29:43 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ Merge changes from Martin Hunt:
+
+ * d30v.h: Allow up to 64 control registers. Add
+ SHORT_A5S format.
+
+ * d30v.h (LONG_Db): New form for delayed branches.
+
+ * d30v.h: (LONG_Db): New form for repeati.
+
+ * d30v.h (SHORT_D2B): New form.
+
+ * d30v.h (SHORT_A2): New form.
+
+ * d30v.h (OPERAND_2REG): Add new operand to indicate 2
+ registers are used. Needed for VLIW optimization.
+
+end-sanitize-d30v
+Mon Sep 8 14:05:45 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * cgen.h: Move assembler interface section
+ up so cgen_parse_operand_result is defined for cgen_parse_address.
+ (cgen_parse_address): Update prototype.
+
+Tue Sep 2 15:32:32 1997 Nick Clifton <nickc@cygnus.com>
+
+ * v850.h (V850_OPREAND_ADJUST_SHORT_MEMORY): Removed.
+
Tue Aug 26 12:21:52 1997 Ian Lance Taylor <ian@cygnus.com>
+ * i386.h (two_byte_segment_defaults): Correct base register 5 in
+ modes 1 and 2 to be ss rather than ds. From Gabriel Paubert
+ <paubert@iram.es>.
+
* i386.h: Set ud2 to 0x0f0b. From Gabriel Paubert
<paubert@iram.es>.
* v850.h (struct v850_opcode): Remove flags field.
-start-sanitize-v850
Wed Aug 13 18:45:48 1997 Nick Clifton <nickc@cygnus.com>
-start-sanitize-v850e
- * .Sanitize (Do-first, Do-last): Add support for keep-v850e
- command line option.
-end-sanitize-v850e
-
-start-sanitize-v850eq
- * .Sanitize (Do-first, Do-last): Add support for keep-v850eq
- command line options.
-end-sanitize-v850eq
-
* v850.h (struct v850_opcode): Add flags field.
(struct v850_operand): Extend meaning of 'bits' and 'shift'
fields.
start-sanitize-v850e
-start-sanitize-v850eq
- (V850E_INSTRUCTION, V850EQ_INSTRUCTION): New flags.
+ (V850E_INSTRUCTION, V850EA_INSTRUCTION): New flags.
(V850E_PUSH_POP, V850E_IMMEDIATE16, V850E_IMMEDIATE32): New flags.
-end-sanitize-v850eq
end-sanitize-v850e
-end-sanitize-v850
Fri Aug 8 16:58:42 1997 Doug Evans <dje@canuck.cygnus.com>
* arc.h: New file.
* i386.h: Correct opcode values for fsubp, fsubrp, fdivp, and
fdivrp.
-start-sanitize-v850
Tue Mar 25 22:57:26 1997 Stu Grossman (grossman@critters.cygnus.com)
* v850.h (extract): Make unsigned.
-end-sanitize-v850
Mon Mar 24 14:38:15 1997 Ian Lance Taylor <ian@cygnus.com>
* i386.h: Add iclr.
(FMT_*): Ditto.
end-sanitize-tic80
-start-sanitize-v850
Tue Dec 31 15:05:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* v850.h (V850_OPERAND_ADJUST_SHORT_MEMORY): New flag to adjust
type IV instruction offsets.
-end-sanitize-v850
start-sanitize-tic80
Fri Dec 27 22:23:10 1996 Fred Fish <fnf@cygnus.com>
* mn10200.h: Fix comment, mn10200_operand not powerpc_operand.
* mn10300.h: Fix comment, mn10300_operand not powerpc_operand.
-start-sanitize-v850
* v850.h: Fix comment, v850_operand not powerpc_operand.
-end-sanitize-v850
Mon Dec 9 16:45:39 1996 Jeffrey A Law (law@cygnus.com)
implementation.
(struct alpha_operand): Move flags slot for better packing.
-start-sanitize-v850
Tue Oct 29 12:19:10 1996 Jeffrey A Law (law@cygnus.com)
* v850.h (V850_OPERAND_RELAX): New operand flag.
-end-sanitize-v850
Thu Oct 10 14:29:11 1996 Jeffrey A Law (law@cygnus.com)
* mn10300.h (FMT_*): Move operand format definitions
* mn10x00.h: New file.
-start-sanitize-v850
Fri Sep 27 18:26:46 1996 Stu Grossman (grossman@critters.cygnus.com)
* v850.h: Add new flag to indicate this instruction uses a PC
displacement.
-end-sanitize-v850
Fri Sep 13 14:58:13 1996 Jeffrey A Law (law@cygnus.com)
* h8300.h (stmac): Add missing instruction.
-start-sanitize-v850
Sat Aug 31 16:02:03 1996 Jeffrey A Law (law@cygnus.com)
* v850.h (v850_opcode): Remove "size" field. Add "memop"
* v850.h: New file.
-end-sanitize-v850
Fri Aug 16 14:44:15 1996 James G. Smith <jsmith@cygnus.co.uk>
* mips.h (OP_SH_LOCC, OP_SH_HICC, OP_MASK_CC, OP_SH_COP1NORM,
projects / deliverable / binutils-gdb.git / blobdiff