-# Sanitize.in for devo.
-# $Id$
-#
+# .Sanitize for devo/ld.
-# Each directory to survive it's way into a release will need a file
+# Each directory to survive its way into a release will need a file
# like this one called "./.Sanitize". All keyword lines must exist,
# and must exist in the order specified by this file. Each directory
# in the tree will be processed, top down, in the following order.
# The lines between the "Do-first:" line and the "Things-to-keep:"
# line are executed as a /bin/sh shell script before anything else is
-# done in this
+# done in this directory.
Do-first:
-if ( echo $* | grep keep\-v9 > /dev/null ) ; then
- keep_these_too=""
-fi
-
# All files listed between the "Things-to-keep:" line and the
# "Files-to-sed:" line will be kept. All other files will be removed.
# Directories listed in this section will have their own Sanitize
# with rm -rf.
Things-to-keep:
+
ChangeLog
+Makefile.am
Makefile.in
+NEWS
README
TODO
-a29k.sc-sh
-a29k.sh
-aout.sc-sh
-aout-mipsbsd.sc-sh
-cdtest-foo.cc
-cdtest-foo.h
-cdtest-func.cc
-cdtest-main.cc
-cdtest.exp
-config
-config.h
+acconfig.h
+aclocal.m4
+acinclude.m4
+config.in
+configure
configure.bat
+configure.host
configure.in
-ebmon29k.sc-sh
-ebmon29k.sh
-generic.em
+configure.tgt
+dep-in.sed
+emulparams
+emultempl
genscripts.sh
h8-doc.texi
ld.1
gen-doc.texi
-gld960.em
-gld960.sh
-go32.sh
-hp300bsd.sh
-h8300hms.em
-h8300hms.sc-sh
-h8300hms.sh
-h8500hms.em
-h8500hms.sc-sh
-h8500hms.sh
-i386aout.sh
-i386bsd.sh
-i386coff.sc-sh
-i386coff.sh
-i960.sc-sh
ld.h
ld.texinfo
+ldcref.c
ldctor.c
ldctor.h
ldemul.c
ldemul.h
-lderror.c
-lderror.h
ldexp.c
ldexp.h
ldfile.c
ldfile.h
ldgram.y
-ldindr.c
-ldindr.h
ldint.texinfo
ldlang.c
ldlang.h
ldmain.h
ldmisc.c
ldmisc.h
-ldsym.c
-ldsym.h
ldver.c
ldver.h
-ldwarn.c
-ldwarn.h
ldwrite.c
ldwrite.h
lexsup.c
-lnk960.em
-lnk960.sh
-m68kcoff.sc-sh
-m68kcoff.sh
-m88kbcs.sc-sh
-m88kbcs.sh
-mips.sc-sh
-mipsbig.sh
-mipsbsd.sh
-mipsidt.sh
-mipslit.sh
+mac-ld.r
+mpw-config.in
+mpw-elfmips.c
+mpw-idtmips.c
+mpw-eppcmac.c
+mpw-esh.c
+mpw-make.sed
mri.c
mri.h
-go32.sh
-mkscript.c
-news.sh
-relax.c
-relax.h
-st2000.em
-st2000.sc-sh
-st2000.sh
-sa29200.sc-sh
-sa29200.sh
-scripts
-sun3.sh
-sun4.sh
-vanilla.em
-vanilla.sc-sh
-vanilla.sh
-z8ksim.em
-z8ksim.sc-sh
-z8ksim.sh
+scripttempl
+stamp-h.in
+sysdep.h
+testsuite
+
+Things-to-lose:
Do-last:
-echo Looking for signs of \"v9\"...
+v850_files="ChangeLog configure.tgt Makefile.am Makefile.in"
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
-if ( echo $* | grep keep\-v9 > /dev/null ) ; then
- for i in * ; do
- if test ! -d $i && (grep sanitize-v9 $i > /dev/null) ; then
- echo Keeping v9 stuff in $i
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
+ for i in $v850_files ; do
+ if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping v850e stuff in $i
+ fi
fi
done
else
- for i in * ; do
- if test ! -d $i && (grep sanitize-v9 $i > /dev/null) ; then
- echo Cleaning the \"v9\" out of $i...
+ for i in $v850_files ; do
+ if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"v850e\" from $i...
+ fi
cp $i new
- sed '/start\-sanitize\-v9/,/end-\sanitize\-v9/d' < $i > new
+ sed '/start\-sanitize\-v850e/,/end-\sanitize\-v850e/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- echo Caching $i in .Recover...
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
mv $i .Recover
fi
mv new $i
done
fi
-#
-#
-# $Log$
-# Revision 1.56 1993/04/09 17:44:54 sac
-# Support for the H8/500
-#
-# Revision 1.55 1993/03/30 23:24:53 pesch
-# ld.texinfo:
-# Conditionalize manual to maintain Cygnus, Hitachi versions in parallel.
-# (Texinfo conditionals are stable enough to permit this, at last!)
-# NOTE: @ignore'd passages from earlier versions DELETED; use CVS history
-# to retrieve if wanted.
-#
-# gen-doc.texi, h8-doc.texi: manual configuration definitions.
-#
-# Makefile.in: link config defn (`gen' by default) to configdoc.texi, included
-# by ld.texinfo
-#
-# .Sanitize: add gen-doc.texi, h8-doc.texi
-#
-# Revision 1.54 1993/03/09 18:12:14 ian
-# Removed obsolete Makefile.dos.
-#
-# Revision 1.53 1993/03/04 20:49:05 ian
-# * mips.sc-sh: Added variables which may be overridden by a
-# specific emulation.
-# * mipsidt.sh: New file; emulation for IDT MIPS board.
-# * Makefile.in (ALL_EMULATIONS): Added em_mipsidt.o.
-# (em_mipsidt.c): New target. Uses mipsidt.sh and mips.sc-sh.
-# * config/mips-idt.mt: New file; sets EMUL to mipsidt.
-# * configure.in (mips-idt-ecoff): New target; uses mips-idt.
-#
-# Revision 1.52 1993/02/28 14:42:15 raeburn
-# mips-bsd and 386bsd support
-#
-# Revision 1.51 1993/02/26 18:53:13 dje
-# Added initial sparc-v9 support.
-#
-# Revision 1.50 1993/02/13 10:15:14 zoo
-# removing excess verbosity
-#
-# Revision 1.49 1993/02/03 17:11:08 ian
-# Keep forgetting those .Sanitize files.
-#
-# Revision 1.48 1993/01/22 22:30:34 ian
-# Fri Jan 22 14:22:44 1993 Ian Lance Taylor (ian@cygnus.com)
-#
-# * mips.sc-sh: New file. Ultrix, and hopefully other MIPS ECOFF
-# targets, linker script.
-# * mipslit.sh: New file. Little endian MIPS emulation.
-# * config/mips-lit.mt: New file. Use mipslit emulation.
-# * configure.in (mips-dec-ultrix*): Use target mips-lit.
-# * Makefile.in (ALL_EMULATIONS): Added em_mipslit.o.
-# (em_mipslit.c): New target. Uses mipslit.sh.
-#
-# Revision 1.47 1992/09/25 18:10:41 sac
-# Fri Sep 25 11:08:01 1992 Steve Chamberlain (sac@thepub.cygnus.com)
-#
-# Added initial support for the z8k
-# * z8ksim.em, z8ksim.sc-sh, z8ksim.sh: new files
-# * configure.in, Makefile.in: modified to reflect above
-#
-# * ldlang.c (lang_check): when linking conflicting architectures,
-# make the output file reflect at least one of the bad inputs.
-#
-# Revision 1.46 1992/09/11 20:43:30 sac
-# Sanitize slip
-#
-# Revision 1.45 1992/09/11 17:47:22 sac
-# Add i386coff.sh
-#
-# Revision 1.44 1992/09/09 18:59:04 ian
-# Brought in from p3. If anybody knows good numbers for m68k COFF,
-# please let me know, or plug them in yourself.
-#
-# Wed Sep 9 11:52:58 1992 Ian Lance Taylor (ian@cygnus.com)
-#
-# * Makefile.in, m68kcoff.sh, m68kcoff.sc-sh, config/m68k-coff.mt:
-# added m68k-coff emulation mode, stolen from a29k emulation.
-# Almost certainly wrong, but perhaps better than sun3.
-#
-# Also fixed an error message in configure.in so that it started with
-# '***' like the other error messages do.
-#
-# Revision 1.43 1992/09/03 22:56:45 bothner
-# Add TODO.
-#
-# Revision 1.42 1992/09/01 22:14:49 bothner
-# Add scripts.
-#
-# Revision 1.41 1992/08/31 01:14:44 bothner
-# * cplus-dem.c: Removed. Use the version in libiberty now.
-# * ldmisc.c: Use new libiberty version of cplus_demangle().
-#
-# Revision 1.40 1992/08/17 18:35:55 pesch
-# Use new name of man page (ld.1).
-#
-# Revision 1.39 1992/08/07 01:37:34 bothner
-# * ldint.texinfo: New internals manual (beginnings thereof).
-# * PORTING: Removed, merged into ldint.texinfo.
-#
-# Revision 1.38 1992/08/05 04:15:24 bothner
-# * cdtest-main.cc, cdtest-func.cc, cdtest-foo.h, cdtest-foo.cc,
-# cdtest.exp: A test program (copied from libg++/test-install)
-# that tests that constructor and destructors are handled
-# corrrectly.
-#
-# Revision 1.37 1992/05/02 02:08:16 sac
-# New stuff for 29200
-#
-# Revision 1.36 1992/05/01 22:08:40 sac
-# Add mri.h
-#
-# Revision 1.35 1992/04/17 15:59:22 sac
-# * relax.c: added handling for new "padding" seclet type, used to
-# fill out gaps between section.
-# * ldgram.y, ldlex.l: now -defsym on the command line is done
-# properly.
-#
-# Revision 1.34 1992/04/15 23:11:53 sac
-# added mri.c
-#
-# Revision 1.33 1992/04/05 01:46:05 sac
-# New lexer.
-#
-# New targets for h8/300 simulator and DOS
-#
-# Revision 1.32 1992/03/07 18:32:27 sac
-# *** empty log message ***
-#
-# Revision 1.31 1992/02/27 17:23:59 sac
-# Why didn't it start emacs
-#
-# Revision 1.30 1992/02/22 00:11:38 sac
-# DJ naming change
-#
-# Revision 1.29 1992/02/16 20:49:26 bothner
-# *** empty log message ***
-#
-# Revision 1.28 1992/02/07 22:32:29 hgs
-# added h8300hms.c and h8300hms.sc
-#
-# Revision 1.27 1992/01/29 16:44:08 sac
-# ldlnk960.c: Special #ifdef to choose little endian ony
-# ldgram.y: allow forward ref of section
-#
-# Revision 1.26 1992/01/24 22:35:55 sac
-# .Sanitize: added relax.c
-# ldsym.c ldlang.* more map stuff
-#
-# Revision 1.25 1991/12/12 03:42:08 sac
-# New dos files
-#
-# Revision 1.24 1991/12/08 01:27:59 sac
-# *** empty log message ***
-#
-# Revision 1.23 1991/11/15 21:09:49 bothner
-# Remove ldgld.c, ldgld68k.c, ldm88k.c, since these are
-# now automatically generated.
-#
-# Revision 1.22 1991/11/06 09:26:59 sac
-# Added three files which had been forgotten
-#
-# Revision 1.21 1991/11/05 21:56:06 sac
-# *** empty log message ***
-#
-# Revision 1.20 1991/11/05 20:36:54 sac
-# *** empty log message ***
-#
-# Revision 1.19 1991/11/04 00:46:44 steve
-# i386 aout changes from Bob Kukura
-#
-# Revision 1.18 1991/10/12 06:43:01 bothner
-# Fixed typo.
-#
-# Revision 1.17 1991/10/11 19:31:38 steve
-# *** empty log message ***
-#
-# Revision 1.16 1991/10/10 11:59:25 rich
-# updating
-#
-# Revision 1.15 1991/10/09 20:40:37 bothner
-# Added h8300hds.{c,sc}.
-#
-# Revision 1.14 1991/10/05 04:55:04 gnu
-# * Makefile.in: Avoid using $< in non-suffix rules (breaks on Sun Make).
-# * ldfile.c, ldlang.c, ldmain.c, ldwrite.c: Cope with renames of a
-# few BFD types & enums.
-# * ChangeLog: Create.
-#
-# Revision 1.13 1991/09/27 20:19:25 bothner
-# Update for deleted (and some added) files.
-#
-# Revision 1.12 1991/09/24 02:30:20 rich
-# ldgram.h is not cvs'd source.
-#
-# Revision 1.11 1991/09/23 20:59:12 steve
-# Cleaned it up for 88k
-#
-# Revision 1.5 1991/08/27 00:21:34 steve
-# Added config.sub
-#
-# Revision 1.4 1991/08/06 21:28:21 steve
-# Patches to fix bugs reported by roland McGrath
-#
-# Revision 1.3 1991/08/01 23:59:06 steve
-# *** empty log message ***
-#
-# Revision 1.2 1991/07/16 00:31:15 steve
-# *** empty log message ***
-#
-# Revision 1.1 1991/05/23 21:45:12 rich
-# Initial revision
-#
-#
-#
+tx49_files="ChangeLog configure.tgt"
+
+if ( echo $* | grep keep\-tx49 > /dev/null ) ; then
+ for i in $tx49_files ; do
+ if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tx49 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $tx49_files ; do
+ if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tx49\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tx49/,/end-\sanitize\-tx49/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+r5900_files="ChangeLog configure.tgt"
+
+if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
+ for i in $r5900_files ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping r5900 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $r5900_files ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"r5900\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+tic80_files="ChangeLog configure.tgt Makefile.am Makefile.in"
+
+if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
+ for i in $tic80_files ; do
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tic80 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $tic80_files ; do
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tic80\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tic80/,/end-\sanitize\-tic80/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+d30v_files="ChangeLog configure.tgt Makefile.am Makefile.in"
+
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+ for i in $d30v_files ; do
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping d30v stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $d30v_files ; do
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"d30v\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+sky_files="ChangeLog configure.tgt Makefile.am Makefile.in"
+
+if ( echo $* | grep keep\-sky > /dev/null ) ; then
+ for i in $sky_files ; do
+ if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping sky stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $sky_files ; do
+ if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"sky\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-sky/,/end-\sanitize\-sky/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+for i in * ; do
+ if test ! -d $i && (grep sanitize $i > /dev/null) ; then
+ echo '***' Some mentions of Sanitize are still left in $i! 1>&2
+ fi
+done
+
+#
# End of file.