#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13.1
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
+ac_help="$ac_help
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
+ac_help="$ac_help
+ --with-lib-path=dir1:dir2... set default LIB_PATH"
ac_help="$ac_help
--enable-targets alternative target configurations"
ac_help="$ac_help
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)"
+ac_help="$ac_help
+ --enable-build-warnings enable build-time compiler warnings if gcc is used"
ac_help="$ac_help
--disable-nls do not use Native Language Support"
ac_help="$ac_help
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.13.1"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
if test -r "$cache_file"; then
echo "loading cache $cache_file"
- test -f "$cache_file" && . $cache_file
+ . $cache_file
else
echo "creating cache $cache_file"
> $cache_file
ac_n= ac_c='\c' ac_t=
fi
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:552: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 557 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:585: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 590 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
ac_aux_dir=
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:568: checking host system type" >&5
-if test "x$ac_cv_host" = "x" || (test "x$host" != "xNONE" && test "x$host" != "x$ac_cv_host_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_host_alias=$host
- case "$ac_cv_host_alias" in
- NONE)
- case $nonopt in
- NONE)
- if ac_cv_host_alias=`$ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) ac_cv_host_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_host=`$ac_config_sub $ac_cv_host_alias`
- ac_cv_host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_host" 1>&6
-
-host=$ac_cv_host
-host_alias=$ac_cv_host_alias
-host_cpu=$ac_cv_host_cpu
-host_vendor=$ac_cv_host_vendor
-host_os=$ac_cv_host_os
-
-
-
-
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:609: checking target system type" >&5
-if test "x$ac_cv_target" = "x" || (test "x$target" != "xNONE" && test "x$target" != "x$ac_cv_target_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_target_alias=$target
- case "$ac_cv_target_alias" in
- NONE)
- case $nonopt in
- NONE)
- ac_cv_target_alias=$host_alias ;;
-
- *) ac_cv_target_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_target=`$ac_config_sub $ac_cv_target_alias`
- ac_cv_target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_target" 1>&6
-
-target=$ac_cv_target
-target_alias=$ac_cv_target_alias
-target_cpu=$ac_cv_target_cpu
-target_vendor=$ac_cv_target_vendor
-target_os=$ac_cv_target_os
-
-
-
-
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:649: checking build system type" >&5
-if test "x$ac_cv_build" = "x" || (test "x$build" != "xNONE" && test "x$build" != "x$ac_cv_build_alias"); then
-
-# Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
- fi
-
- ac_cv_build_alias=$build
- case "$ac_cv_build_alias" in
- NONE)
- case $nonopt in
- NONE)
- ac_cv_build_alias=$host_alias ;;
-
- *) ac_cv_build_alias=$nonopt ;;
- esac ;;
- esac
-
- ac_cv_build=`$ac_config_sub $ac_cv_build_alias`
- ac_cv_build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- ac_cv_build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- ac_cv_build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-else
- echo $ac_n "(cached) $ac_c" 1>&6
-fi
-
-echo "$ac_t""$ac_cv_build" 1>&6
-
-build=$ac_cv_build
-build_alias=$ac_cv_build_alias
-build_cpu=$ac_cv_build_cpu
-build_vendor=$ac_cv_build_vendor
-build_os=$ac_cv_build_os
-
-
-
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Do some error checking and defaulting for the host and target type.
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
-test "$host_alias" != "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:726: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:662: checking host system type" >&5
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:683: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:783: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
- fi
- if test "$*" != "X $srcdir/configure conftestfile" \
- && test "$*" != "X conftestfile $srcdir/configure"; then
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:701: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
- fi
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
- test "$2" = conftestfile
- )
-then
- # Ok.
- :
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:726: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},;$program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:840: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftestmake <<\EOF
-all:
- @echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- SET_MAKE=
-else
- echo "$ac_t""no" 1>&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
-PACKAGE=ld
-
-VERSION=2.9.5
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:886: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
- ACLOCAL=aclocal
- echo "$ac_t""found" 1>&6
-else
- ACLOCAL="$missing_dir/missing aclocal"
- echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:899: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
- AUTOCONF=autoconf
- echo "$ac_t""found" 1>&6
-else
- AUTOCONF="$missing_dir/missing autoconf"
- echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:912: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
- AUTOMAKE=automake
- echo "$ac_t""found" 1>&6
-else
- AUTOMAKE="$missing_dir/missing automake"
- echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:925: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
- AUTOHEADER=autoheader
- echo "$ac_t""found" 1>&6
-else
- AUTOHEADER="$missing_dir/missing autoheader"
- echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:938: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
- MAKEINFO=makeinfo
- echo "$ac_t""found" 1>&6
-else
- MAKEINFO="$missing_dir/missing makeinfo"
- echo "$ac_t""missing" 1>&6
-fi
-
-
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_shared=yes
-fi
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
- enableval="$enable_static"
- p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_static=yes
-fi
-
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
- enableval="$enable_fast_install"
- p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_fast_install=yes
-fi
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1024: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_RANLIB+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1054: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
+ echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1084: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:756: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
if test -z "$CC"; then
case "`uname -s`" in
- *win32* | *WIN32* | *CYGWIN*)
+ *win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1135: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:807: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1167: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:839: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1178 "configure"
+#line 850 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1183: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1209: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:881: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1214: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:886: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1223: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:895: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1242: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:914: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
fi
fi
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval="$with_gnu_ld"
- test "$withval" = no || with_gnu_ld=yes
+echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+echo "configure:946: checking for POSIXized ISC" >&5
+if test -d /etc/conf/kconfig.d &&
+ grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+then
+ echo "$ac_t""yes" 1>&6
+ ISC=yes # If later tests want to check for ISC.
+ cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+ if test "$GCC" = yes; then
+ CC="$CC -posix"
+ else
+ CC="$CC -Xp"
+ fi
else
- with_gnu_ld=no
+ echo "$ac_t""no" 1>&6
+ ISC=
fi
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1285: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
+
+BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:980: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:1033: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+ fi
+
+ test "$2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:1090: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+PACKAGE=ld
+
+VERSION=${BFD_VERSION}
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:1136: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal
+ echo "$ac_t""found" 1>&6
+else
+ ACLOCAL="$missing_dir/missing aclocal"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:1149: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$ac_t""found" 1>&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:1162: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake
+ echo "$ac_t""found" 1>&6
+else
+ AUTOMAKE="$missing_dir/missing automake"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:1175: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$ac_t""found" 1>&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:1188: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$ac_t""found" 1>&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$ac_t""missing" 1>&6
+fi
+
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=yes
+fi
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_static=yes
+fi
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:1283: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:1313: checking for GNU ld" >&5
+else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:1316: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1351: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1368: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1380: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+
+NM="$lt_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1418: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1439: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.012)
+ lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ case $host_cpu in
+ hppa*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ esac
+ ;;
+
+irix5* | irix6*)
+ case $host_os in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
;;
*)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
;;
esac
-elif test "$with_gnu_ld" = yes; then
- echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1309: checking for GNU ld" >&5
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+ fi
+ ;;
+
+newsos6)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1612: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1312: checking for non-GNU ld" >&5
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1618: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
fi
-if eval "test \"\${ac_cv_path_LD+set}\" = set"; then
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1638: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1681: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1743: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1814: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1846: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
fi
done
IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
-
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- echo "$ac_t""$LD" 1>&6
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1347: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"\${ac_cv_prog_gnu_ld+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
+
else
- ac_cv_prog_gnu_ld=no
+ RANLIB=":"
fi
fi
-echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
-
-
-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1363: checking for BSD-compatible nm" >&5
-if eval "test \"\${ac_cv_path_NM+set}\" = set"; then
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1881: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- break
- else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi
fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-NM="$ac_cv_path_NM"
-echo "$ac_t""$NM" 1>&6
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1399: checking whether ln -s works" >&5
-if eval "test \"\${ac_cv_prog_LN_S+set}\" = set"; then
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1913: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
- rm -f conftestdata
- ac_cv_prog_LN_S="ln -s"
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
- ac_cv_prog_LN_S=ln
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
- echo "$ac_t""yes" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+else
+ STRIP=":"
+fi
+fi
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$lt_target" in
+case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1448 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1449: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case "`/usr/bin/file conftest.o`" in
+ echo '#line 1980 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1981: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
;;
rm -rf conftest*
;;
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2000: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1470: checking whether the C compiler needs -belf" >&5
-if eval "test \"\${lt_cv_cc_needs_belf+set}\" = set"; then
+echo "configure:2018: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1475 "configure"
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 2031 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1482: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
lt_cv_cc_needs_belf=no
fi
rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
fi
echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
if test -r "$cache_file"; then
echo "loading cache $cache_file"
- test -f "$cache_file" && . $cache_file
+ . $cache_file
else
echo "creating cache $cache_file"
> $cache_file
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# clobbered by the next message.
exec 5>>./config.log
+
+
+
+
+
+
+# Check whether --with-lib-path or --without-lib-path was given.
+if test "${with_lib_path+set}" = set; then
+ withval="$with_lib_path"
+ LIB_PATH=$withval
+fi
# Check whether --enable-targets or --disable-targets was given.
if test "${enable_targets+set}" = set; then
want64=false
fi
+build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
+# Check whether --enable-build-warnings or --disable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then
+ enableval="$enable_build_warnings"
+ case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
+fi
+
+
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1622: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:2221: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1652: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:2251: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
if test -z "$CC"; then
case "`uname -s`" in
- *win32* | *WIN32* | *CYGWIN*)
+ *win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1703: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_CC+set}\" = set"; then
+echo "configure:2302: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1735: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) works" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:2334: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1746 "configure"
+#line 2345 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1751: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1777: checking whether the C compiler ($CC $CFLAGS $CPPFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2376: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1782: checking whether we are using GNU C" >&5
-if eval "test \"\${ac_cv_prog_gcc+set}\" = set"; then
+echo "configure:2381: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1791: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2390: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1810: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"\${ac_cv_prog_cc_g+set}\" = set"; then
+echo "configure:2409: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1853: checking for a BSD compatible install" >&5
+echo "configure:2452: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
-if eval "test \"\${ac_cv_path_install+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
- elif test $ac_prog = install &&
- grep pwplus $ac_dir/$ac_prog >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-ALL_LINGUAS=
+ALL_LINGUAS="fr sv tr es"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1912: checking how to run the C preprocessor" >&5
+echo "configure:2507: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
-if eval "test \"\${ac_cv_prog_CPP+set}\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be in double quotes, not single quotes, because CPP may get
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1927 "configure"
+#line 2522 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1933: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2528: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1944 "configure"
+#line 2539 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1950: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2545: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1961 "configure"
+#line 2556 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1967: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2562: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
fi
echo "$ac_t""$CPP" 1>&6
-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:1992: checking for POSIXized ISC" >&5
-if test -d /etc/conf/kconfig.d &&
- grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
-then
- echo "$ac_t""yes" 1>&6
- ISC=yes # If later tests want to check for ISC.
- cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
-EOF
-
- if test "$GCC" = yes; then
- CC="$CC -posix"
- else
- CC="$CC -Xp"
- fi
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2589: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
- ISC=
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2013: checking for ANSI C header files" >&5
-if eval "test \"\${ac_cv_header_stdc+set}\" = set"; then
+echo "configure:2617: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2018 "configure"
+#line 2622 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2630: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2043 "configure"
+#line 2647 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2061 "configure"
+#line 2665 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2082 "configure"
+#line 2686 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2093: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2117: checking for working const" >&5
-if eval "test \"\${ac_cv_c_const+set}\" = set"; then
+echo "configure:2721: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2122 "configure"
+#line 2726 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2171: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2775: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2192: checking for inline" >&5
-if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
+echo "configure:2796: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2199 "configure"
+#line 2803 "configure"
#include "confdefs.h"
int main() {
-} $ac_kw int foo() {
+} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2206: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2810: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2232: checking for off_t" >&5
-if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
+echo "configure:2836: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2237 "configure"
+#line 2841 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_type_off_t=yes"
+ ac_cv_type_off_t=yes
else
rm -rf conftest*
- eval "ac_cv_type_off_t=no"
+ ac_cv_type_off_t=no
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_type_'off_t`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
- cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+ cat >> confdefs.h <<\EOF
#define off_t long
EOF
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2267: checking for size_t" >&5
-if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
+echo "configure:2869: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2272 "configure"
+#line 2874 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_type_size_t=yes"
+ ac_cv_type_size_t=yes
else
rm -rf conftest*
- eval "ac_cv_type_size_t=no"
+ ac_cv_type_size_t=no
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_type_'size_t`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
- cat >> confdefs.h <<EOF
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+ cat >> confdefs.h <<\EOF
#define size_t unsigned
EOF
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2304: checking for working alloca.h" >&5
-if eval "test \"\${ac_cv_header_alloca_h+set}\" = set"; then
+echo "configure:2904: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2309 "configure"
+#line 2909 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2916: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2337: checking for alloca" >&5
-if eval "test \"\${ac_cv_func_alloca_works+set}\" = set"; then
+echo "configure:2937: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2342 "configure"
+#line 2942 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2402: checking whether alloca needs Cray hooks" >&5
-if eval "test \"\${ac_cv_os_cray+set}\" = set"; then
+echo "configure:3002: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2407 "configure"
+#line 3007 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2432: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3032: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2437 "configure"
+#line 3037 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:2461: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2488: checking stack direction for C alloca" >&5
-if eval "test \"\${ac_cv_c_stack_direction+set}\" = set"; then
+echo "configure:3087: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2496 "configure"
+#line 3095 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3114: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
-for ac_hdr in unistd.h
+for ac_hdr in stdlib.h unistd.h sys/stat.h sys/types.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2540: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3139: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2545 "configure"
+#line 3144 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2550: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2579: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3178: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2584 "configure"
+#line 3183 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:2608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2633: checking for working mmap" >&5
-if eval "test \"\${ac_cv_func_mmap_fixed_mapped+set}\" = set"; then
+echo "configure:3231: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2641 "configure"
+#line 3239 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
#include <fcntl.h>
#include <sys/mman.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+
+#if HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
/* This mess was copied from the GNU getpagesize.h. */
#ifndef HAVE_GETPAGESIZE
-# ifdef HAVE_UNISTD_H
-# include <unistd.h>
-# endif
/* Assume that all systems that can run configure have sys/param.h. */
# ifndef HAVE_SYS_PARAM_H
}
EOF
-if { (eval echo configure:2781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2809: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3420: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2814 "configure"
+#line 3425 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3430: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2849: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3460: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2854 "configure"
+#line 3465 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:2878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3488: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2907: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3517: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2912 "configure"
+#line 3522 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:2936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:2970: checking for LC_MESSAGES" >&5
-if eval "test \"\${am_cv_val_LC_MESSAGES+set}\" = set"; then
+echo "configure:3579: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2975 "configure"
+#line 3584 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:2982: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3003: checking whether NLS is requested" >&5
+echo "configure:3612: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3023: checking whether included gettext is requested" >&5
+echo "configure:3632: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3042: checking for libintl.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:3651: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3047 "configure"
+#line 3656 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3052: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3661: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3069: checking for gettext in libc" >&5
-if eval "test \"\${gt_cv_func_gettext_libc+set}\" = set"; then
+echo "configure:3678: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3074 "configure"
+#line 3683 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3097: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:3706: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3105 "configure"
+#line 3714 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3132: checking for gettext in libintl" >&5
-if eval "test \"\${gt_cv_func_gettext_libintl+set}\" = set"; then
+echo "configure:3741: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3137 "configure"
+#line 3746 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3172: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3781: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3206: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:3815: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3211 "configure"
+#line 3820 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:3235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3843: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3262: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:3870: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3298: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:3906: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
fi
cat > conftest.$ac_ext <<EOF
-#line 3330 "configure"
+#line 3938 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3338: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3946: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3370: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_MSGFMT+set}\" = set"; then
+echo "configure:3978: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3404: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_GMSGFMT+set}\" = set"; then
+echo "configure:4012: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3440: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_path_XGETTEXT+set}\" = set"; then
+echo "configure:4048: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3530: checking for catalogs to be installed" >&5
+echo "configure:4138: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3558: checking for linux/version.h" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:4166: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3563 "configure"
+#line 4171 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3568: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4176: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
l=
- if test -d $srcdir/po; then
+ if test -f $srcdir/po/POTFILES.in; then
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
fi
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:3631: checking for Cygwin environment" >&5
-if eval "test \"\${ac_cv_cygwin+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3636 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:3647: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_cygwin=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_cygwin=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:3663: checking for mingw32 environment" >&5
-if eval "test \"\${ac_cv_mingw32+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3668 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:3675: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_mingw32=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_mingw32=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
-echo $ac_n "checking for EMX OS/2 environment""... $ac_c" 1>&6
-echo "configure:3691: checking for EMX OS/2 environment" >&5
-if eval "test \"\${ac_cv_emxos2+set}\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3696 "configure"
-#include "confdefs.h"
-
-int main() {
-return __EMX__;
-; return 0; }
-EOF
-if { (eval echo configure:3703: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_emxos2=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_emxos2=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_emxos2" 1>&6
-EMXOS2=
-test "$ac_cv_emxos2" = yes && EMXOS2=yes
-
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:3722: checking for executable suffix" >&5
-if eval "test \"\${ac_cv_exeext+set}\" = set"; then
+echo "configure:4241: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$CYGWIN" = yes || test "$MINGW32" = yes || test "$EMXOS2" = yes; then
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
ac_cv_exeext=.exe
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:3732: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:4251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.C | *.o | *.obj | *.xcoff) ;;
+ *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3758: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_YACC+set}\" = set"; then
+echo "configure:4277: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$YACC"; then
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3794: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_LEX+set}\" = set"; then
+echo "configure:4313: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$LEX"; then
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3827: checking for $ac_word" >&5
-if eval "test \"\${ac_cv_prog_LEX+set}\" = set"; then
+echo "configure:4346: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$LEX"; then
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:3861: checking for yywrap in -l$ac_lib" >&5
-ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:4380: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3869 "configure"
+#line 4388 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:3880: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4399: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:3903: checking lex output file root" >&5
-if eval "test \"\${ac_cv_prog_lex_root+set}\" = set"; then
+echo "configure:4422: checking lex output file root" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# The minimal lex program is just a single line: %%. But some broken lexes
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:3924: checking whether yytext is a pointer" >&5
-if eval "test \"\${ac_cv_prog_lex_yytext_pointer+set}\" = set"; then
+echo "configure:4443: checking whether yytext is a pointer" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# POSIX says lex can declare yytext either as a pointer or an array; the
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 3936 "configure"
+#line 4455 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:3943: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3966: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4485: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4000: checking for $ac_hdr" >&5
-if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
+echo "configure:4519: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4005 "configure"
+#line 4524 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4010: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4529: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4039: checking for $ac_func" >&5
-if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
+echo "configure:4558: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4044 "configure"
+#line 4563 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
-char (*f)();
int main() {
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-f = $ac_func;
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:4068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4586: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:4097: checking for $ac_hdr that defines DIR" >&5
-if eval "test \"\${ac_cv_header_dirent_$ac_safe+set}\" = set"; then
+echo "configure:4615: checking for $ac_hdr that defines DIR" >&5
+if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4102 "configure"
+#line 4620 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:4110: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4628: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4135: checking for opendir in -ldir" >&5
-ac_lib_var=`echo dir'_'opendir | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:4653: checking for opendir in -ldir" >&5
+ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4143 "configure"
+#line 4661 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4672: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4176: checking for opendir in -lx" >&5
-ac_lib_var=`echo x'_'opendir | sed 'y%./+-:%__p__%'`
-if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
+echo "configure:4694: checking for opendir in -lx" >&5
+ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4184 "configure"
+#line 4702 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
esac
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4228: checking whether strstr must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_strstr+set}\" = set"; then
+echo "configure:4746: checking whether strstr must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4233 "configure"
+#line 4751 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:4254: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4772: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:4275: checking whether free must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_free+set}\" = set"; then
+echo "configure:4793: checking whether free must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4280 "configure"
+#line 4798 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:4301: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4819: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
fi
echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6
-echo "configure:4322: checking whether sbrk must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_sbrk+set}\" = set"; then
+echo "configure:4840: checking whether sbrk must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4327 "configure"
+#line 4845 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) sbrk
; return 0; }
EOF
-if { (eval echo configure:4348: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4866: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_sbrk=no
else
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4369: checking whether getenv must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_getenv+set}\" = set"; then
+echo "configure:4887: checking whether getenv must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4374 "configure"
+#line 4892 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:4395: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4913: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
fi
echo $ac_n "checking whether environ must be declared""... $ac_c" 1>&6
-echo "configure:4416: checking whether environ must be declared" >&5
-if eval "test \"\${bfd_cv_decl_needed_environ+set}\" = set"; then
+echo "configure:4934: checking whether environ must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4421 "configure"
+#line 4939 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) environ
; return 0; }
EOF
-if { (eval echo configure:4442: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4960: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_environ=no
else
# constants, while still supporting pre-ANSI compilers which do not
# support string concatenation.
echo $ac_n "checking whether ANSI C string concatenation works""... $ac_c" 1>&6
-echo "configure:4470: checking whether ANSI C string concatenation works" >&5
-if eval "test \"\${ld_cv_string_concatenation+set}\" = set"; then
+echo "configure:4988: checking whether ANSI C string concatenation works" >&5
+if eval "test \"`echo '$''{'ld_cv_string_concatenation'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4475 "configure"
+#line 4993 "configure"
#include "confdefs.h"
int main() {
char *a = "a" "a";
; return 0; }
EOF
-if { (eval echo configure:4482: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5000: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ld_cv_string_concatenation=yes
else
+
EMULATION_LIBPATH=$all_libpath
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.13.1"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
+s%@CC@%$CC%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
-s%@RANLIB@%$RANLIB%g
-s%@CC@%$CC%g
s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
+s%@WARN_CFLAGS@%$WARN_CFLAGS%g
s%@CPP@%$CPP%g
s%@ALLOCA@%$ALLOCA%g
s%@USE_NLS@%$USE_NLS%g
s%@GT_YES@%$GT_YES%g
s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
s%@l@%$l%g
-s%@EXEEXT@%$EXEEXT%g
s%@YACC@%$YACC%g
s%@LEX@%$LEX%g
s%@LEXLIB@%$LEXLIB%g
s%@TDIRS@%%g
s%@EMULATION_OFILES@%$EMULATION_OFILES%g
s%@EMUL_EXTRA_OFILES@%$EMUL_EXTRA_OFILES%g
+s%@LIB_PATH@%$LIB_PATH%g
s%@EMULATION_LIBPATH@%$EMULATION_LIBPATH%g
s%@TESTBFDLIB@%$TESTBFDLIB%g
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || $SHELL $CONFIG_STATUS || exit 1
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
projects / deliverable / binutils-gdb.git / blobdiff