#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.7
-# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
+# Generated automatically using autoconf version 2.13
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
+ac_help="$ac_help
+ --enable-shared[=PKGS] build shared libraries [default=yes]"
+ac_help="$ac_help
+ --enable-static[=PKGS] build static libraries [default=yes]"
+ac_help="$ac_help
+ --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
+ac_help="$ac_help
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --disable-libtool-lock avoid locking (might break parallel builds)"
+ac_help="$ac_help
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
--enable-targets alternative target configurations"
ac_help="$ac_help
- --enable-shared build shared BFD library"
+ --enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)"
+ac_help="$ac_help
+ --enable-build-warnings Enable build-time compiler warnings if gcc is used"
+ac_help="$ac_help
+ --disable-nls do not use Native Language Support"
+ac_help="$ac_help
+ --with-included-gettext use the GNU gettext library included here"
+ac_help="$ac_help
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.7"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+# Only set these to C if already set. These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='echo $CPP $CPPFLAGS 1>&5;
-$CPP $CPPFLAGS'
-ac_compile='echo ${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5;
-${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5 2>&5'
-ac_link='echo ${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5;
-${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 2>&5'
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+ac_exeext=
+ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='\c' ac_t=
fi
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:550: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 555 "configure"
+#include "confdefs.h"
+int main() {
-# Check whether --enable-targets or --disable-targets was given.
-if test "${enable_targets+set}" = set; then
- enableval="$enable_targets"
- case "${enableval}" in
- yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
- ;;
- no) enable_targets= ;;
- *) enable_targets=$enableval ;;
-esac
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:566: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
fi
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- case "${enableval}" in
- yes) shared=true ;;
- no) shared=false ;;
- *) { echo "configure: error: bad value ${enableval} for BFD shared option" 1>&2; exit 1; } ;;
-esac
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:583: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 588 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:595: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
fi
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
ac_aux_dir=
-for ac_dir in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`; do
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`" 1>&2; exit 1; }
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
# Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:660: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
- if host_alias=`$ac_config_guess`; then :
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
-host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:681: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac ;;
esac
-target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:699: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac ;;
esac
-build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
NONENONEs,x,x, &&
program_prefix=${target_alias}-
-if test -z "$target" ; then
- { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; }
+
+ echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
+echo "configure:723: checking for strerror in -lcposix" >&5
+ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lcposix $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 731 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char strerror();
+
+int main() {
+strerror()
+; return 0; }
+EOF
+if { (eval echo configure:742: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
fi
-if test -z "$host" ; then
- { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; }
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -lcposix"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+
+BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:778: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:831: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+ fi
+
+ test "$2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:888: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
-# host-specific stuff:
-. ${srcdir}/configure.host
+PACKAGE=ld
+
+VERSION=${BFD_VERSION}
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:934: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal
+ echo "$ac_t""found" 1>&6
+else
+ ACLOCAL="$missing_dir/missing aclocal"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:947: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$ac_t""found" 1>&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:960: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake
+ echo "$ac_t""found" 1>&6
+else
+ AUTOMAKE="$missing_dir/missing automake"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:973: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$ac_t""found" 1>&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:986: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$ac_t""found" 1>&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$ac_t""missing" 1>&6
+fi
+
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=yes
+fi
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_static=yes
+fi
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1072: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_CC" && ac_cv_prog_CC="cc"
fi
fi
CC="$ac_cv_prog_CC"
echo "$ac_t""no" 1>&6
fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1102: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1153: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1185: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 1196 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:1201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1227: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1232: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if ${CC-cc} -E conftest.c 2>&5 | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1241: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- if test "${CFLAGS+set}" != set; then
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1260: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_gcc_g=yes
+ ac_cv_prog_cc_g=yes
else
- ac_cv_prog_gcc_g=no
+ ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
- if test $ac_cv_prog_gcc_g = yes; then
- CFLAGS="-g -O"
- else
- CFLAGS="-O"
- fi
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
fi
else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
fi
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
-
-
-
-
-
-
-
-# For most hosts we can use a simple definition to pick up the BFD and
-# opcodes libraries. However, if we are building shared libraries, we
-# need to handle some hosts specially.
-BFDLIB='-L../bfd -lbfd'
-if test "${shared}" = "true"; then
- case "${host}" in
- *-*-sunos*)
- # On SunOS, we must link against the name we are going to install,
- # not -lbfd, since SunOS does not support SONAME.
- BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:1303: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
;;
esac
+elif test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:1333: checking for GNU ld" >&5
+else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:1336: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1371: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1388: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1400: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+
+NM="$lt_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1438: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1459: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.012)
+ lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case $host_os in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+ fi
+ ;;
+
+newsos6)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1623: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1629: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1649: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1692: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1754: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1825: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1857: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ RANLIB=":"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1892: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1924: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ STRIP=":"
+fi
+fi
+
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 1991 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1992: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:2013: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 2026 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
+fi
+rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+fi
+
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+
+esac
+
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+
+
+
+
+# Check whether --enable-targets or --disable-targets was given.
+if test "${enable_targets+set}" = set; then
+ enableval="$enable_targets"
+ case "${enableval}" in
+ yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; }
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac
+fi
+# Check whether --enable-64-bit-bfd or --disable-64-bit-bfd was given.
+if test "${enable_64_bit_bfd+set}" = set; then
+ enableval="$enable_64_bit_bfd"
+ case "${enableval}" in
+ yes) want64=true ;;
+ no) want64=false ;;
+ *) { echo "configure: error: bad value ${enableval} for 64-bit-bfd option" 1>&2; exit 1; } ;;
+esac
+else
+ want64=false
+fi
+
+build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
+# Check whether --enable-build-warnings or --disable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then
+ enableval="$enable_build_warnings"
+ case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
+fi
+
+
+
+
+
+
+if test -z "$target" ; then
+ { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; }
+fi
+if test -z "$host" ; then
+ { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; }
+fi
+
+# host-specific stuff:
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2210: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2240: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2291: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:2323: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 2334 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:2339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2365: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:2370: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2379: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:2398: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:2441: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+ALL_LINGUAS="fr sv tr es"
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:2496: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
fi
-
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 794 "configure"
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 2511 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2517: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 2528 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2534: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 2545 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2551: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2578: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:2606: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2611 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2619: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ ac_cv_header_stdc=yes
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 2636 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 2654 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+ :
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2675 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:2686: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+ cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:2710: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2715 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this. */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this. */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this. */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in an arm
+ of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:2764: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_const=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+ cat >> confdefs.h <<\EOF
+#define const
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:2785: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 2792 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:2799: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking for off_t""... $ac_c" 1>&6
+echo "configure:2825: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2830 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_off_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_off_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+ cat >> confdefs.h <<\EOF
+#define off_t long
+EOF
+
+fi
+
+echo $ac_n "checking for size_t""... $ac_c" 1>&6
+echo "configure:2858: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2863 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_size_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_size_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+ cat >> confdefs.h <<\EOF
+#define size_t unsigned
+EOF
+
+fi
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments. Useless!
+echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:2893: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2898 "configure"
+#include "confdefs.h"
+#include <alloca.h>
+int main() {
+char *p = alloca(2 * sizeof(int));
+; return 0; }
+EOF
+if { (eval echo configure:2905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_header_alloca_h=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_alloca_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
+if test $ac_cv_header_alloca_h = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA_H 1
+EOF
+
+fi
+
+echo $ac_n "checking for alloca""... $ac_c" 1>&6
+echo "configure:2926: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2931 "configure"
+#include "confdefs.h"
+
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
+# else
+# if HAVE_ALLOCA_H
+# include <alloca.h>
+# else
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+# endif
+# endif
+# endif
+# endif
+#endif
+
+int main() {
+char *p = (char *) alloca(1);
+; return 0; }
+EOF
+if { (eval echo configure:2959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_func_alloca_works=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_func_alloca_works=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA 1
+EOF
+
+fi
+
+if test $ac_cv_func_alloca_works = no; then
+ # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+ # that cause trouble. Some versions do not even contain alloca or
+ # contain a buggy version. If you still want to use their alloca,
+ # use ar to extract alloca.o from them instead of compiling alloca.c.
+ ALLOCA=alloca.${ac_objext}
+ cat >> confdefs.h <<\EOF
+#define C_ALLOCA 1
+EOF
+
+
+echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:2991: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2996 "configure"
+#include "confdefs.h"
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "webecray" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_os_cray=yes
+else
+ rm -rf conftest*
+ ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_os_cray" 1>&6
+if test $ac_cv_os_cray = yes; then
+for ac_func in _getb67 GETB67 getb67; do
+ echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3021: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3026 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<EOF
+#define CRAY_STACKSEG_END $ac_func
+EOF
+
+ break
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+done
+fi
+
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:3076: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_stack_direction=0
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3084 "configure"
+#include "confdefs.h"
+find_stack_direction ()
+{
+ static char *addr = 0;
+ auto char dummy;
+ if (addr == 0)
+ {
+ addr = &dummy;
+ return find_stack_direction ();
+ }
+ else
+ return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+ exit (find_stack_direction() < 0);
+}
+EOF
+if { (eval echo configure:3103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_c_stack_direction=1
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_c_stack_direction=-1
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+EOF
+
+fi
+
+for ac_hdr in stdlib.h unistd.h sys/stat.h sys/types.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3128: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3133 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3138: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getpagesize
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3167: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3172 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking for working mmap""... $ac_c" 1>&6
+echo "configure:3220: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_mmap_fixed_mapped=no
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3228 "configure"
+#include "confdefs.h"
+
+/* Thanks to Mike Haertel and Jim Avera for this test.
+ Here is a matrix of mmap possibilities:
+ mmap private not fixed
+ mmap private fixed at somewhere currently unmapped
+ mmap private fixed at somewhere already mapped
+ mmap shared not fixed
+ mmap shared fixed at somewhere currently unmapped
+ mmap shared fixed at somewhere already mapped
+ For private mappings, we should verify that changes cannot be read()
+ back from the file, nor mmap's back from the file at a different
+ address. (There have been systems where private was not correctly
+ implemented like the infamous i386 svr4.0, and systems where the
+ VM page cache was not coherent with the filesystem buffer cache
+ like early versions of FreeBSD and possibly contemporary NetBSD.)
+ For shared mappings, we should conversely verify that changes get
+ propogated back to all the places they're supposed to be.
+
+ Grep wants private fixed already mapped.
+ The main things grep needs to know about mmap are:
+ * does it exist and is it safe to write into the mmap'd area
+ * how to use it (BSD variants) */
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+
+#if HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+/* This mess was copied from the GNU getpagesize.h. */
+#ifndef HAVE_GETPAGESIZE
+
+/* Assume that all systems that can run configure have sys/param.h. */
+# ifndef HAVE_SYS_PARAM_H
+# define HAVE_SYS_PARAM_H 1
+# endif
+
+# ifdef _SC_PAGESIZE
+# define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+# ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+# ifdef EXEC_PAGESIZE
+# define getpagesize() EXEC_PAGESIZE
+# else /* no EXEC_PAGESIZE */
+# ifdef NBPG
+# define getpagesize() NBPG * CLSIZE
+# ifndef CLSIZE
+# define CLSIZE 1
+# endif /* no CLSIZE */
+# else /* no NBPG */
+# ifdef NBPC
+# define getpagesize() NBPC
+# else /* no NBPC */
+# ifdef PAGESIZE
+# define getpagesize() PAGESIZE
+# endif /* PAGESIZE */
+# endif /* no NBPC */
+# endif /* no NBPG */
+# endif /* no EXEC_PAGESIZE */
+# else /* no HAVE_SYS_PARAM_H */
+# define getpagesize() 8192 /* punt totally */
+# endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+#ifdef __cplusplus
+extern "C" { void *malloc(unsigned); }
+#else
+char *malloc();
+#endif
+
+int
+main()
+{
+ char *data, *data2, *data3;
+ int i, pagesize;
+ int fd;
+
+ pagesize = getpagesize();
+
+ /*
+ * First, make a file with some known garbage in it.
+ */
+ data = malloc(pagesize);
+ if (!data)
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ *(data + i) = rand();
+ umask(0);
+ fd = creat("conftestmmap", 0600);
+ if (fd < 0)
+ exit(1);
+ if (write(fd, data, pagesize) != pagesize)
+ exit(1);
+ close(fd);
+
+ /*
+ * Next, try to mmap the file at a fixed address which
+ * already has something else allocated at it. If we can,
+ * also make sure that we see the same garbage.
+ */
+ fd = open("conftestmmap", O_RDWR);
+ if (fd < 0)
+ exit(1);
+ data2 = malloc(2 * pagesize);
+ if (!data2)
+ exit(1);
+ data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
+ if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_FIXED, fd, 0L))
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data2 + i))
+ exit(1);
+
+ /*
+ * Finally, make sure that changes to the mapped area
+ * do not percolate back to the file as seen by read().
+ * (This is a bug on some variants of i386 svr4.0.)
+ */
+ for (i = 0; i < pagesize; ++i)
+ *(data2 + i) = *(data2 + i) + 1;
+ data3 = malloc(pagesize);
+ if (!data3)
+ exit(1);
+ if (read(fd, data3, pagesize) != pagesize)
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data3 + i))
+ exit(1);
+ close(fd);
+ unlink("conftestmmap");
+ exit(0);
+}
+
+EOF
+if { (eval echo configure:3381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_func_mmap_fixed_mapped=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP 1
+EOF
+
+fi
+
+
+ for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3409: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3414 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3419: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3449: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3454 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
+ if test "${ac_cv_func_stpcpy+set}" != "set"; then
+ for ac_func in stpcpy
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3506: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3511 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ fi
+ if test "${ac_cv_func_stpcpy}" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_STPCPY 1
+EOF
+
+ fi
+
+ if test $ac_cv_header_locale_h = yes; then
+ echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
+echo "configure:3568: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3573 "configure"
+#include "confdefs.h"
+#include <locale.h>
+int main() {
+return LC_MESSAGES
+; return 0; }
+EOF
+if { (eval echo configure:3580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ am_cv_val_LC_MESSAGES=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_val_LC_MESSAGES=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LC_MESSAGES 1
+EOF
+
+ fi
+ fi
+ echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
+echo "configure:3601: checking whether NLS is requested" >&5
+ # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+ enableval="$enable_nls"
+ USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi
+
+ echo "$ac_t""$USE_NLS" 1>&6
+
+
+ USE_INCLUDED_LIBINTL=no
+
+ if test "$USE_NLS" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_NLS 1
+EOF
+
+ echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
+echo "configure:3621: checking whether included gettext is requested" >&5
+ # Check whether --with-included-gettext or --without-included-gettext was given.
+if test "${with_included_gettext+set}" = set; then
+ withval="$with_included_gettext"
+ nls_cv_force_use_gnu_gettext=$withval
+else
+ nls_cv_force_use_gnu_gettext=no
+fi
+
+ echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+ CATOBJEXT=NONE
+
+ ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
+echo "configure:3640: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3645 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3650: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
+echo "configure:3667: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3672 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:3679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ gt_cv_func_gettext_libc=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gt_cv_func_gettext_libc=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
+
+ if test "$gt_cv_func_gettext_libc" != "yes"; then
+ echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
+echo "configure:3695: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lintl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3703 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char bindtextdomain();
+
+int main() {
+bindtextdomain()
+; return 0; }
+EOF
+if { (eval echo configure:3714: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
+echo "configure:3730: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3735 "configure"
+#include "confdefs.h"
+
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:3742: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ gt_cv_func_gettext_libintl=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gt_cv_func_gettext_libintl=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ if test "$gt_cv_func_gettext_libc" = "yes" \
+ || test "$gt_cv_func_gettext_libintl" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_GETTEXT 1
+EOF
+
+ # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3770: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MSGFMT" in
+ /*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+ echo "$ac_t""$MSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ if test "$MSGFMT" != "no"; then
+ for ac_func in dcgettext
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3804: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3809 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3859: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GMSGFMT" in
+ /*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+ echo "$ac_t""$GMSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3895: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$XGETTEXT" in
+ /*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+ echo "$ac_t""$XGETTEXT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ cat > conftest.$ac_ext <<EOF
+#line 3927 "configure"
+#include "confdefs.h"
+
+int main() {
+extern int _nl_msg_cat_cntr;
+ return _nl_msg_cat_cntr
+; return 0; }
+EOF
+if { (eval echo configure:3935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ CATOBJEXT=.gmo
+ DATADIRNAME=share
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CATOBJEXT=.mo
+ DATADIRNAME=lib
+fi
+rm -f conftest*
+ INSTOBJEXT=.mo
+ fi
+ fi
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+ if test "$CATOBJEXT" = "NONE"; then
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ INTLOBJS="\$(GETTOBJS)"
+ # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3967: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MSGFMT" in
+ /*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+ echo "$ac_t""$MSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4001: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$GMSGFMT" in
+ /*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+ echo "$ac_t""$GMSGFMT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4037: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$XGETTEXT" in
+ /*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+ echo "$ac_t""$XGETTEXT" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+ USE_INCLUDED_LIBINTL=yes
+ CATOBJEXT=.gmo
+ INSTOBJEXT=.mo
+ DATADIRNAME=share
+ INTLDEPS='$(top_builddir)/../intl/libintl.a'
+ INTLLIBS=$INTLDEPS
+ LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
+
+ if test "$XGETTEXT" != ":"; then
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
+ XGETTEXT=":"
+ fi
+ fi
+
+ # We need to process the po/ directory.
+ POSUB=po
+ else
+ DATADIRNAME=share
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
+
+ # If this is used in GNU gettext we have to set USE_NLS to `yes'
+ # because some of the sources are only built for this goal.
+ if test "$PACKAGE" = gettext; then
+ USE_NLS=yes
+ USE_INCLUDED_LIBINTL=yes
+ fi
+
+ for lang in $ALL_LINGUAS; do
+ GMOFILES="$GMOFILES $lang.gmo"
+ POFILES="$POFILES $lang.po"
+ done
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
+echo "configure:4127: checking for catalogs to be installed" >&5
+ NEW_LINGUAS=
+ for lang in ${LINGUAS=$ALL_LINGUAS}; do
+ case "$ALL_LINGUAS" in
+ *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ echo "$ac_t""$LINGUAS" 1>&6
+ fi
+
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ if test $ac_cv_header_locale_h = yes; then
+ INCLUDE_LOCALE_H="#include <locale.h>"
+ else
+ INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>. Take care yourself. */"
+ fi
+
+
+ if test -f $srcdir/po2tbl.sed.in; then
+ if test "$CATOBJEXT" = ".cat"; then
+ ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
+echo "configure:4155: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4160 "configure"
+#include "confdefs.h"
+#include <linux/version.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4165: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ msgformat=linux
+else
+ echo "$ac_t""no" 1>&6
+msgformat=xopen
+fi
+
+
+ sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
+ fi
+ sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+ $srcdir/po2tbl.sed.in > po2tbl.sed
+ fi
+
+ if test "$PACKAGE" = "gettext"; then
+ GT_NO="#NO#"
+ GT_YES=
+ else
+ GT_NO=
+ GT_YES="#YES#"
+ fi
+
+
+
+ MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
+
+
+ l=
+
+
+ if test -f $srcdir/po/POTFILES.in; then
+ test -d po || mkdir po
+ if test "x$srcdir" != "x."; then
+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+ posrcprefix="$srcdir/"
+ else
+ posrcprefix="../$srcdir/"
+ fi
+ else
+ posrcprefix="../"
+ fi
+ rm -f po/POTFILES
+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+ < $srcdir/po/POTFILES.in > po/POTFILES
+ fi
+
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:4230: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:4240: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+
+for ac_prog in 'bison -y' byacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4266: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_YACC="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+ echo "$ac_t""$YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+missing_dir=`cd $ac_aux_dir && pwd`
+for ac_prog in flex lex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4302: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$LEX" && break
+done
+test -n "$LEX" || LEX=""$missing_dir/missing flex""
+
+# Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4335: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$LEXLIB"
+then
+ case "$LEX" in
+ flex*) ac_lib=fl ;;
+ *) ac_lib=l ;;
+ esac
+ echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
+echo "configure:4369: checking for yywrap in -l$ac_lib" >&5
+ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-l$ac_lib $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4377 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char yywrap();
+
+int main() {
+yywrap()
+; return 0; }
+EOF
+if { (eval echo configure:4388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LEXLIB="-l$ac_lib"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+echo $ac_n "checking lex output file root""... $ac_c" 1>&6
+echo "configure:4411: checking lex output file root" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # The minimal lex program is just a single line: %%. But some broken lexes
+# (Solaris, I think it was) want two %% lines, so accommodate them.
+echo '%%
+%%' | $LEX
+if test -f lex.yy.c; then
+ ac_cv_prog_lex_root=lex.yy
+elif test -f lexyy.c; then
+ ac_cv_prog_lex_root=lexyy
+else
+ { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
+LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
+echo "configure:4432: checking whether yytext is a pointer" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # POSIX says lex can declare yytext either as a pointer or an array; the
+# default is implementation-dependent. Figure out which it is, since
+# not all implementations provide the %pointer and %array declarations.
+ac_cv_prog_lex_yytext_pointer=no
+echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
+ac_save_LIBS="$LIBS"
+LIBS="$LIBS $LEXLIB"
+cat > conftest.$ac_ext <<EOF
+#line 4444 "configure"
#include "confdefs.h"
-#include <assert.h>
-Syntax Error
+`cat $LEX_OUTPUT_ROOT.c`
+int main() {
+
+; return 0; }
EOF
-eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
+if { (eval echo configure:4451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 808 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
+ ac_cv_prog_lex_yytext_pointer=yes
else
- echo "$ac_err" >&5
- rm -rf conftest*
- CPP=/lib/cpp
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
rm -f conftest*
+LIBS="$ac_save_LIBS"
+rm -f "${LEX_OUTPUT_ROOT}.c"
+
fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
+
+echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
+if test $ac_cv_prog_lex_yytext_pointer = yes; then
+ cat >> confdefs.h <<\EOF
+#define YYTEXT_POINTER 1
+EOF
+
fi
- CPP="$ac_cv_prog_CPP"
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:4474: checking whether to enable maintainer-specific portions of Makefiles" >&5
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ USE_MAINTAINER_MODE=$enableval
else
- ac_cv_prog_CPP="$CPP"
+ USE_MAINTAINER_MODE=no
fi
-echo "$ac_t""$CPP" 1>&6
+
+ echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+
+
+if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+. ${srcdir}/configure.host
+
+
+
+
+
for ac_hdr in string.h strings.h stdlib.h unistd.h
do
-ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:4508: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 841 "configure"
+#line 4513 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
-eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-ac_err=`grep -v '^ *+' conftest.out`
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4518: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:4547: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 876 "configure"
+#line 4552 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
char $ac_func();
-int main() { return 0; }
-int t() {
+int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
; return 0; }
EOF
-if eval $ac_link; then
+if { (eval echo configure:4575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
-
fi
+
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
ac_header_dirent=no
for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
do
-ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
+echo "configure:4604: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 929 "configure"
+#line 4609 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
-int main() { return 0; }
-int t() {
+int main() {
DIR *dirp = 0;
; return 0; }
EOF
-if eval $ac_compile; then
+if { (eval echo configure:4617: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=no"
fi
rm -f conftest*
-
fi
if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdedfghijklmnopqrstuvwxyz./\055' 'ABCDEDFGHIJKLMNOPQRSTUVWXYZ___'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
done
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
-echo $ac_n "checking for -ldir""... $ac_c" 1>&6
-ac_lib_var=`echo dir | tr '.-/+' '___p'`
+echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
+echo "configure:4642: checking for opendir in -ldir" >&5
+ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 969 "configure"
+#line 4650 "configure"
#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir();
-int main() { return 0; }
-int t() {
+int main() {
opendir()
; return 0; }
EOF
-if eval $ac_link; then
+if { (eval echo configure:4661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
fi
else
-echo $ac_n "checking for -lx""... $ac_c" 1>&6
-ac_lib_var=`echo x | tr '.-/+' '___p'`
+echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
+echo "configure:4683: checking for opendir in -lx" >&5
+ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1004 "configure"
+#line 4691 "configure"
#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir();
-int main() { return 0; }
-int t() {
+int main() {
opendir()
; return 0; }
EOF
-if eval $ac_link; then
+if { (eval echo configure:4702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
case "${host}" in
-i[345]86-*-msdos* | i[345]86-*-go32* | *-*-cygwin32)
+*-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*)
cat >> confdefs.h <<\EOF
#define USE_BINARY_FOPEN 1
EOF
;;
esac
+echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
+echo "configure:4735: checking whether strstr must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4740 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) strstr
+; return 0; }
+EOF
+if { (eval echo configure:4761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_decl_needed_strstr=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_decl_needed_strstr=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_strstr" 1>&6
+if test $bfd_cv_decl_needed_strstr = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_STRSTR 1
+EOF
+
+fi
+
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
+echo "configure:4782: checking whether free must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1047 "configure"
+#line 4787 "configure"
#include "confdefs.h"
#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
-int main() { return 0; }
-int t() {
+int main() {
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if eval $ac_compile; then
+if { (eval echo configure:4808: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
bfd_cv_decl_needed_free=yes
fi
rm -f conftest*
-
fi
echo "$ac_t""$bfd_cv_decl_needed_free" 1>&6
if test $bfd_cv_decl_needed_free = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo free | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_FREE 1
+EOF
+
+fi
+
+echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6
+echo "configure:4829: checking whether sbrk must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4834 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) sbrk
+; return 0; }
+EOF
+if { (eval echo configure:4855: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_decl_needed_sbrk=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_decl_needed_sbrk=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_sbrk" 1>&6
+if test $bfd_cv_decl_needed_sbrk = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_SBRK 1
+EOF
+
+fi
+
+echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
+echo "configure:4876: checking whether getenv must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4881 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) getenv
+; return 0; }
+EOF
+if { (eval echo configure:4902: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_decl_needed_getenv=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_decl_needed_getenv=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_getenv" 1>&6
+if test $bfd_cv_decl_needed_getenv = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_GETENV 1
+EOF
+
+fi
+
+echo $ac_n "checking whether environ must be declared""... $ac_c" 1>&6
+echo "configure:4923: checking whether environ must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_environ'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4928 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) environ
+; return 0; }
+EOF
+if { (eval echo configure:4949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_decl_needed_environ=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_decl_needed_environ=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_environ" 1>&6
+if test $bfd_cv_decl_needed_environ = yes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_ENVIRON 1
+EOF
+
+fi
+
+
+# When converting linker scripts into strings for use in emulation
+# files, use astring.sed if the compiler supports ANSI string
+# concatenation, or ostring.sed otherwise. This is to support the
+# broken Microsoft MSVC compiler, which limits the length of string
+# constants, while still supporting pre-ANSI compilers which do not
+# support string concatenation.
+echo $ac_n "checking whether ANSI C string concatenation works""... $ac_c" 1>&6
+echo "configure:4977: checking whether ANSI C string concatenation works" >&5
+if eval "test \"`echo '$''{'ld_cv_string_concatenation'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4982 "configure"
+#include "confdefs.h"
+
+int main() {
+char *a = "a" "a";
+; return 0; }
EOF
+if { (eval echo configure:4989: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ld_cv_string_concatenation=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ld_cv_string_concatenation=no
+fi
+rm -f conftest*
+fi
+echo "$ac_t""$ld_cv_string_concatenation" 1>&6
+if test "$ld_cv_string_concatenation" = "yes"; then
+ STRINGIFY=astring.sed
+else
+ STRINGIFY=ostring.sed
fi
all_targets=
EMUL=
all_emuls=
-TDIRS=
+all_emul_extras=
+all_libpath=
+
+rm -f tdirs
for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
do
EMUL=$targ_emul
fi
- for i in $targ_emul $targ_extra_emuls; do
+ for i in $targ_emul $targ_extra_emuls $targ_extra_libpath; do
case " $all_emuls " in
*" e${i}.o "*) ;;
*)
all_emuls="$all_emuls e${i}.o"
eval result=\$tdir_$i
test -z "$result" && result=$targ_alias
- TDIRS="$TDIRS\\
-tdir_$i=$result"
+ echo tdir_$i=$result >> tdirs
+ ;;
+ esac
+ done
+
+ for i in $targ_emul $targ_extra_libpath; do
+ case " $all_libpath " in
+ *" ${i} "*) ;;
+ *)
+ if test -z "$all_libpath"; then
+ all_libpath=${i}
+ else
+ all_libpath="$all_libpath ${i}"
+ fi
+ ;;
+ esac
+ done
+
+ for i in $targ_extra_ofiles; do
+ case " $all_emul_extras " in
+ *" ${i} "*) ;;
+ *)
+ all_emul_extras="$all_emul_extras ${i}"
;;
esac
done
+TDIRS=tdirs
+
if test x${all_targets} = xtrue; then
- EMULATION_OFILES='$(ALL_EMULATIONS)'
+ if test x${want64} = xtrue; then
+ EMULATION_OFILES='$(ALL_EMULATIONS) $(ALL_64_EMULATIONS)'
+ else
+ EMULATION_OFILES='$(ALL_EMULATIONS)'
+ fi
+ EMUL_EXTRA_OFILES='$(ALL_EMUL_EXTRA_OFILES)'
else
EMULATION_OFILES=$all_emuls
+ EMUL_EXTRA_OFILES=$all_emul_extras
+fi
+
+
+
+EMULATION_LIBPATH=$all_libpath
+
+
+if test x${enable_static} = xno; then
+ TESTBFDLIB="--rpath ../bfd/.libs ../bfd/.libs/libbfd.so"
+else
+ TESTBFDLIB="../bfd/.libs/libbfd.a"
fi
+target_vendor=${target_vendor=$host_vendor}
+case "$target_vendor" in
+ hp) EXTRA_SHLIB_EXTENSION=".sl" ;;
+ *) EXTRA_SHLIB_EXTENSION= ;;
+esac
+if test x${EXTRA_SHLIB_EXTENSION} != x ; then
+ cat >> confdefs.h <<EOF
+#define EXTRA_SHLIB_EXTENSION "$EXTRA_SHLIB_EXTENSION"
+EOF
+
+fi
+
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# --recheck option to rerun configure.
#
EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
- >> confcache
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.7"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
done
ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
+s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
s%@CC@%$CC%g
-s%@HLDFLAGS@%$HLDFLAGS%g
-s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
+s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
+s%@LIBTOOL@%$LIBTOOL%g
+s%@WARN_CFLAGS@%$WARN_CFLAGS%g
+s%@CPP@%$CPP%g
+s%@ALLOCA@%$ALLOCA%g
+s%@USE_NLS@%$USE_NLS%g
+s%@MSGFMT@%$MSGFMT%g
+s%@GMSGFMT@%$GMSGFMT%g
+s%@XGETTEXT@%$XGETTEXT%g
+s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
+s%@CATALOGS@%$CATALOGS%g
+s%@CATOBJEXT@%$CATOBJEXT%g
+s%@DATADIRNAME@%$DATADIRNAME%g
+s%@GMOFILES@%$GMOFILES%g
+s%@INSTOBJEXT@%$INSTOBJEXT%g
+s%@INTLDEPS@%$INTLDEPS%g
+s%@INTLLIBS@%$INTLLIBS%g
+s%@INTLOBJS@%$INTLOBJS%g
+s%@POFILES@%$POFILES%g
+s%@POSUB@%$POSUB%g
+s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
+s%@GT_NO@%$GT_NO%g
+s%@GT_YES@%$GT_YES%g
+s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
+s%@l@%$l%g
+s%@YACC@%$YACC%g
+s%@LEX@%$LEX%g
+s%@LEXLIB@%$LEXLIB%g
+s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
+s%@MAINT@%$MAINT%g
s%@HDEFINES@%$HDEFINES%g
s%@HOSTING_CRT0@%$HOSTING_CRT0%g
s%@HOSTING_LIBS@%$HOSTING_LIBS%g
s%@NATIVE_LIB_DIRS@%$NATIVE_LIB_DIRS%g
-s%@BFDLIB@%$BFDLIB%g
-s%@CPP@%$CPP%g
+s%@STRINGIFY@%$STRINGIFY%g
s%@EMUL@%$EMUL%g
-s%@TDIRS@%$TDIRS%g
+/@TDIRS@/r $TDIRS
+s%@TDIRS@%%g
s%@EMULATION_OFILES@%$EMULATION_OFILES%g
+s%@EMUL_EXTRA_OFILES@%$EMUL_EXTRA_OFILES%g
+s%@EMULATION_LIBPATH@%$EMULATION_LIBPATH%g
+s%@TESTBFDLIB@%$TESTBFDLIB%g
CEOF
EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+ else
+ sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+ fi
+ if test ! -s conftest.s$ac_file; then
+ ac_more_lines=false
+ rm -f conftest.s$ac_file
+ else
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f conftest.s$ac_file"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ fi
+ ac_file=`expr $ac_file + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ fi
+done
+if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+fi
+EOF
+
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile po/Makefile.in:po/Make-in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile]", defaulting infile="outfile.in".
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust relative srcdir, etc. for subdirectories.
+ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
+
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
-" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
-rm -f conftest.subs
+rm -f conftest.s*
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+ CONFIG_HEADERS="config.h:config.in"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile]", defaulting infile="outfile.in".
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- cp $ac_given_srcdir/$ac_file_in conftest.in
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ cat $ac_file_inputs > conftest.in
EOF
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
-# Maximum number of lines to put in a single here document.
-ac_max_here_lines=12
rm -f conftest.tail
while :
echo "$ac_file is unchanged"
rm -f conftest.h
else
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ fi
rm -f $ac_file
mv conftest.h $ac_file
fi
fi; done
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
-case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
+sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile
exit 0
EOF
chmod +x $CONFIG_STATUS