@cindex dynamic symbol table
@kindex -E
@kindex --export-dynamic
+@kindex --no-export-dynamic
@item -E
@itemx --export-dynamic
-When creating a dynamically linked executable, add all symbols to the
-dynamic symbol table. The dynamic symbol table is the set of symbols
-which are visible from dynamic objects at run time.
+@itemx --no-export-dynamic
+When creating a dynamically linked executable, using the @option{-E}
+option or the @option{--export-dynamic} option causes the linker to add
+all symbols to the dynamic symbol table. The dynamic symbol table is the
+set of symbols which are visible from dynamic objects at run time.
-If you do not use this option, the dynamic symbol table will normally
-contain only those symbols which are referenced by some dynamic object
-mentioned in the link.
+If you do not use either of these options (or use the
+@option{--no-export-dynamic} option to restore the default behavior), the
+dynamic symbol table will normally contain only those symbols which are
+referenced by some dynamic object mentioned in the link.
If you use @code{dlopen} to load a dynamic object which needs to refer
back to the symbols defined by the program, rather than some other
Specify the name of a version script to the linker. This is typically
used when creating shared libraries to specify additional information
about the version hierarchy for the library being created. This option
-is only meaningful on ELF platforms which support shared libraries.
-@xref{VERSION}.
+is only fully supported on ELF platforms which support shared libraries;
+see @ref{VERSION}. It is partially supported on PE platforms, which can
+use version scripts to filter symbol visibility in auto-export mode: any
+symbols marked @samp{local} in the version script will not be exported.
+@xref{WIN32}.
@kindex --warn-common
@cindex warnings, on combining symbols
@item --warn-shared-textrel
Warn if the linker adds a DT_TEXTREL to a shared object.
+@kindex --warn-alternate-em
+@item --warn-alternate-em
+Warn if an object has alternate ELF machine code.
+
@kindex --warn-unresolved-symbols
@item --warn-unresolved-symbols
If the linker is going to report an unresolved symbol (see the option
@smallexample
@group
@var{section} [@var{address}] [(@var{type})] :
- [AT(@var{lma})] [ALIGN(@var{section_align})] [SUBALIGN(@var{subsection_align})]
+ [AT(@var{lma})]
+ [ALIGN(@var{section_align})]
+ [SUBALIGN(@var{subsection_align})]
+ [@var{constraint}]
@{
@var{output-section-command}
@var{output-section-command}
@cindex output section attributes
We showed above that the full description of an output section looked
like this:
+
@smallexample
@group
@var{section} [@var{address}] [(@var{type})] :
- [AT(@var{lma})] [ALIGN(@var{section_align})] [SUBALIGN(@var{subsection_align})]
+ [AT(@var{lma})]
+ [ALIGN(@var{section_align})]
+ [SUBALIGN(@var{subsection_align})]
+ [@var{constraint}]
@{
@var{output-section-command}
@var{output-section-command}
@} [>@var{region}] [AT>@var{lma_region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}]
@end group
@end smallexample
+
We've already described @var{section}, @var{address}, and
@var{output-section-command}. In this section we will describe the
remaining section attributes.
* Output Section LMA:: Output section LMA
* Forced Output Alignment:: Forced Output Alignment
* Forced Input Alignment:: Forced Input Alignment
+* Output Section Constraint:: Output section constraint
* Output Section Region:: Output section region
* Output Section Phdr:: Output section phdr
* Output Section Fill:: Output section fill
SUBALIGN. The value specified overrides any alignment given by input
sections, whether larger or smaller.
+@node Output Section Constraint
+@subsubsection Output Section Constraint
+@kindex ONLY_IF_RO
+@kindex ONLY_IF_RW
+@cindex constraints on output sections
+You can specify that an output section should only be created if all
+of its input sections are read-only or all of its input sections are
+read-write by using the keyword @code{ONLY_IF_RO} and
+@code{ONLY_IF_RW} respectively.
+
@node Output Section Region
@subsubsection Output Section Region
@kindex >@var{region}
@menu
* Constants:: Constants
+* Symbolic Constants:: Symbolic constants
* Symbols:: Symbol Names
* Orphan Sections:: Orphan Sections
* Location Counter:: The Location Counter
Note - the @code{K} and @code{M} suffixes cannot be used in
conjunction with the base suffixes mentioned above.
+@node Symbolic Constants
+@subsection Symbolic Constants
+@cindex symbolic constants
+@kindex CONSTANT
+It is possible to refer to target specific constants via the use of
+the @code{CONSTANT(@var{name})} operator, where @var{name} is one of:
+
+@table @code
+@item MAXPAGESIZE
+@kindex MAXPAGESIZE
+The target's maximum page size.
+
+@item COMMONPAGESIZE
+@kindex COMMONPAGESIZE
+The target's default page size.
+@end table
+
+So for example:
+
+@smallexample
+ .text ALIGN (CONSTANT (MAXPAGESIZE)) : @{ *(.text) @}
+@end smallexample
+
+will create a text section aligned to the largest page boundary
+supported by the target.
+
@node Symbols
@subsection Symbol Names
@cindex symbol names
target subroutine is a leaf routine (that is, the target subroutine does
not itself call any subroutines).
+@cindex Cortex-A8 erratum workaround
+@kindex --fix-cortex-a8
+@kindex --no-fix-cortex-a8
+The @samp{--fix-cortex-a8} switch enables a link-time workaround for an erratum in certain Cortex-A8 processors. The workaround is enabled by default if you are targeting the ARM v7-A architecture profile. It can be enabled otherwise by specifying @samp{--fix-cortex-a8}, or disabled unconditionally by specifying @samp{--no-fix-cortex-a8}.
+
+The erratum only affects Thumb-2 code. Please contact ARM for further details.
+
@ifclear GENERIC
@lowersections
@end ifclear
@samp{--relax} enables the generation of trampolines that can access
the entire 32-bit address space. These trampolines are inserted at
section boundaries, so may not themselves be reachable if an input
-section exceeds 33M in size.
+section exceeds 33M in size. You may combine @samp{-r} and
+@samp{--relax} to add trampolines in a partial link. In that case
+both branches to undefined symbols and inter-section branches are also
+considered potentially out of range, and trampolines inserted.
@cindex PowerPC ELF32 options
@table @option
@item --exclude-symbols
@item --exclude-libs
@item --exclude-modules-for-implib
+@item --version-script
@end itemize
-If, however, @samp{--export-all-symbols} is not given explicitly on the
+When auto-export is in operation, @command{ld} will export all the non-local
+(global and common) symbols it finds in a DLL, with the exception of a few
+symbols known to belong to the system's runtime and libraries. As it will
+often not be desirable to export all of a DLL's symbols, which may include
+private functions that are not part of any public interface, the command-line
+options listed above may be used to filter symbols out from the list for
+exporting. The @samp{--output-def} option can be used in order to see the
+final list of exported symbols with all exclusions taken into effect.
+
+If @samp{--export-all-symbols} is not given explicitly on the
command line, then the default auto-export behavior will be @emph{disabled}
if either of the following are true:
As a GNU extension, weak symbols that do not specify an alternate symbol
are supported. If the symbol is undefined when linking, the symbol
uses a default value.
+
+@cindex aligned common symbols
+@item aligned common symbols
+As a GNU extension to the PE file format, it is possible to specify the
+desired alignment for a common symbol. This information is conveyed from
+the assembler or compiler to the linker by means of GNU-specific commands
+carried in the object file's @samp{.drectve} section, which are recognized
+by @command{ld} and respected when laying out the common symbols. Native
+tools will be able to process object files employing this GNU extension,
+but will fail to respect the alignment instructions, and may issue noisy
+warnings about unknown linker directives.
@end table
@ifclear GENERIC
projects / deliverable / binutils-gdb.git / blobdiff