\input texinfo
@setfilename ld.info
@c Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-@c 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+@c 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
@c Free Software Foundation, Inc.
@syncodeindex ky cp
@c man begin INCLUDE
@set UsesEnvVars
@set GENERIC
@set ARM
+@set C6X
@set H8300
@set HPPA
@set I960
@end ifset
@c man end
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
+@ifnottex
+@dircategory Software development
+@direntry
* Ld: (ld). The GNU linker.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
+@end direntry
+@end ifnottex
@copying
This file documents the @sc{gnu} linker LD
unresolved symbol but the option @option{--warn-unresolved-symbols}
can change this to a warning.
-@kindex --verbose
-@cindex verbose
+@kindex --verbose[=@var{NUMBER}]
+@cindex verbose[=@var{NUMBER}]
@item --dll-verbose
-@itemx --verbose
+@itemx --verbose[=@var{NUMBER}]
Display the version number for @command{ld} and list the linker emulations
supported. Display which input files can and cannot be opened. Display
-the linker script being used by the linker.
+the linker script being used by the linker. If the optional @var{NUMBER}
+argument > 1, plugin symbol status will also be displayed.
@kindex --version-script=@var{version-scriptfile}
@cindex version script, symbol versions
Request creation of @code{.eh_frame_hdr} section and ELF
@code{PT_GNU_EH_FRAME} segment header.
+@kindex --ld-generated-unwind-info
+@item --no-ld-generated-unwind-info
+Request creation of @code{.eh_frame} unwind info for linker
+generated code sections like PLT. This option is on by default
+if linker generated unwind info is supported.
+
@kindex --enable-new-dtags
@kindex --disable-new-dtags
@item --enable-new-dtags
@c man end
+@ifset C6X
+@subsection Options specific to C6X uClinux targets
+
+@c man begin OPTIONS
+
+The C6X uClinux target uses a binary format called DSBT to support shared
+libraries. Each shared library in the system needs to have a unique index;
+all executables use an index of 0.
+
+@table @gcctabopt
+
+@kindex --dsbt-size
+@item --dsbt-size @var{size}
+This option sets the number of entires in the DSBT of the current executable
+or shared library to @var{size}. The default is to create a table with 64
+entries.
+
+@kindex --dsbt-index
+@item --dsbt-index @var{index}
+This option sets the DSBT index of the current executable or shared library
+to @var{index}. The default is 0, which is appropriate for generating
+executables. If a shared library is generated with a DSBT index of 0, the
+@code{R_C6000_DSBT_INDEX} relocs are copied into the output file.
+
+@kindex --no-merge-exidx-entries
+The @samp{--no-merge-exidx-entries} switch disables the merging of adjacent
+exidx entries in frame unwind info.
+
+@end table
+
+@c man end
+@end ifset
+
@ifset M68HC11
@subsection Options specific to Motorola 68HC11 and 68HC12 targets
architecture of an object file by using the @code{objdump} program with
the @samp{-f} option.
@end ifclear
+
+@item LD_FEATURE(@var{string})
+@kindex LD_FEATURE(@var{string})
+This command may be used to modify @command{ld} behavior. If
+@var{string} is @code{"SANE_EXPR"} then absolute symbols and numbers
+in a script are simply treated as numbers everywhere.
+@xref{Expression Section}.
@end table
@node Assignments
@cindex address, section
@cindex section address
The @var{address} is an expression for the VMA (the virtual memory
-address) of the output section. If you do not provide @var{address},
-the linker will set it based on @var{region} if present, or otherwise
-based on the current value of the location counter.
-
-If you provide @var{address}, the address of the output section will be
-set to precisely that. If you provide neither @var{address} nor
-@var{region}, then the address of the output section will be set to the
-current value of the location counter aligned to the alignment
-requirements of the output section. The alignment requirement of the
-output section is the strictest alignment of any input section contained
-within the output section.
-
-For example,
+address) of the output section. This address is optional, but if it
+is provided then the output address will be set exactly as specified.
+
+If the output address is not specified then one will be chosen for the
+section, based on the heuristic below. This address will be adjusted
+to fit the alignment requirement of the output section. The
+alignment requirement is the strictest alignment of any input section
+contained within the output section.
+
+The output section address heuristic is as follows:
+
+@itemize @bullet
+@item
+If an output memory @var{region} is set for the section then it
+is added to this region and its address will be the next free address
+in that region.
+
+@item
+If the MEMORY command has been used to create a list of memory
+regions then the first region which has attributes compatible with the
+section is selected to contain it. The section's output address will
+be the next free address in that region; @ref{MEMORY}.
+
+@item
+If no memory regions were specified, or none match the section then
+the output address will be based on the current value of the location
+counter.
+@end itemize
+
+@noindent
+For example:
+
@smallexample
.text . : @{ *(.text) @}
@end smallexample
+
@noindent
and
+
@smallexample
.text : @{ *(.text) @}
@end smallexample
+
@noindent
are subtly different. The first will set the address of the
@samp{.text} output section to the current value of the location
counter. The second will set it to the current value of the location
-counter aligned to the strictest alignment of a @samp{.text} input
-section.
+counter aligned to the strictest alignment of any of the @samp{.text}
+input sections.
The @var{address} may be an arbitrary expression; @ref{Expressions}.
For example, if you want to align the section on a 0x10 byte boundary,
difference is @code{SORT_BY_ALIGNMENT} will sort sections into
ascending order by alignment before placing them in the output file.
+@cindex SORT_BY_INIT_PRIORITY
+@code{SORT_BY_INIT_PRIORITY} is very similar to @code{SORT_BY_NAME}. The
+difference is @code{SORT_BY_INIT_PRIORITY} will sort sections into
+ascending order by numerical value of the GCC init_priority attribute
+encoded in the section name before placing them in the output file.
+
@cindex SORT
@code{SORT} is an alias for @code{SORT_BY_NAME}.
the input sections which map into it. You can override this by using
the section type. For example, in the script sample below, the
@samp{ROM} section is addressed at memory location @samp{0} and does not
-need to be loaded when the program is run. The contents of the
-@samp{ROM} section will appear in the linker output file as usual.
+need to be loaded when the program is run.
@smallexample
@group
SECTIONS @{
@cindex load address
@cindex section load address
Every section has a virtual address (VMA) and a load address (LMA); see
-@ref{Basic Script Concepts}. The address expression which may appear in
-an output section description sets the VMA (@pxref{Output Section
-Address}).
-
-The expression @var{lma} that follows the @code{AT} keyword specifies
-the load address of the section.
+@ref{Basic Script Concepts}. The virtual address is specified by the
+@pxref{Output Section Address} described earlier. The load address is
+specified by the @code{AT} or @code{AT>} keywords. Specifying a load
+address is optional.
-Alternatively, with @samp{AT>@var{lma_region}} expression, you may
-specify a memory region for the section's load address. @xref{MEMORY}.
-Note that if the section has not had a VMA assigned to it then the
-linker will use the @var{lma_region} as the VMA region as well.
+The @code{AT} keyword takes an expression as an argument. This
+specifies the exact load address of the section. The @code{AT>} keyword
+takes the name of a memory region as an argument. @xref{MEMORY}. The
+load address of the section is set to the next free address in the
+region, aligned to the section's alignment requirements.
If neither @code{AT} nor @code{AT>} is specified for an allocatable
-section, the linker will set the LMA such that the difference between
-VMA and LMA for the section is the same as the preceding output
-section in the same region. If there is no preceding output section
-or the section is not allocatable, the linker will set the LMA equal
-to the VMA.
-@xref{Output Section Region}.
+section, the linker will use the following heuristic to determine the
+load address:
+
+@itemize @bullet
+@item
+If the section has a specific VMA address, then this is used as
+the LMA address as well.
+
+@item
+If the section is not allocatable then its LMA is set to its VMA.
+
+@item
+Otherwise if a memory region can be found that is compatible
+with the current section, and this region contains at least one
+section, then the LMA is set so the difference between the
+VMA and LMA is the same as the difference between the VMA and LMA of
+the last section in the located region.
+
+@item
+If no memory regions have been declared then a default region
+that covers the entire address space is used in the previous step.
+
+@item
+If no suitable region could be found, or there was no previous
+section then the LMA is set equal to the VMA.
+@end itemize
@cindex ROM initialized data
@cindex initialized data in ROM
char *src = &_etext;
char *dst = &_data;
-/* ROM has data at end of text; copy it. */
-while (dst < &_edata) @{
+/* ROM has data at end of text; copy it. */
+while (dst < &_edata)
*dst++ = *src++;
-@}
-/* Zero bss */
+/* Zero bss. */
for (dst = &_bstart; dst< &_bend; dst++)
*dst = 0;
@end group
@item L
Same as @samp{I}
@item !
-Invert the sense of any of the preceding attributes
+Invert the sense of any of the attributes that follow
@end table
If a unmapped section matches any of the listed attributes other than
bar1; bar2;
extern "C++" @{
ns::*;
- "int f(int, double)";
- @}
+ "f(int, double)";
+ @};
@} VERS_1.2;
@end smallexample
The supported @samp{lang}s are @samp{C}, @samp{C++}, and @samp{Java}.
The linker will iterate over the list of symbols at the link time and
demangle them according to @samp{lang} before matching them to the
-patterns specified in @samp{version-script-commands}.
+patterns specified in @samp{version-script-commands}. The default
+@samp{lang} is @samp{C}.
Demangled names may contains spaces and other special characters. As
described above, you can use a glob pattern to match demangled names,
@cindex absolute and relocatable symbols
@cindex relocatable and absolute symbols
@cindex symbols, relocatable and absolute
-When the linker evaluates an expression, the result is either absolute
-or relative to some section. A relative expression is expressed as a
-fixed offset from the base of a section.
+Addresses and symbols may be section relative, or absolute. A section
+relative symbol is relocatable. If you request relocatable output
+using the @samp{-r} option, a further link operation may change the
+value of a section relative symbol. On the other hand, an absolute
+symbol will retain the same value throughout any further link
+operations.
+
+Some terms in linker expressions are addresses. This is true of
+section relative symbols and for builtin functions that return an
+address, such as @code{ADDR}, @code{LOADADDR}, @code{ORIGIN} and
+@code{SEGMENT_START}. Other terms are simply numbers, or are builtin
+functions that return a non-address value, such as @code{LENGTH}.
+One complication is that unless you set @code{LD_FEATURE ("SANE_EXPR")}
+(@pxref{Miscellaneous Commands}), numbers and absolute symbols are treated
+differently depending on their location, for compatibility with older
+versions of @code{ld}. Expressions appearing outside an output
+section definition treat all numbers as absolute addresses.
+Expressions appearing inside an output section definition treat
+absolute symbols as numbers. If @code{LD_FEATURE ("SANE_EXPR")} is
+given, then absolute symbols and numbers are simply treated as numbers
+everywhere.
+
+In the following simple example,
-The position of the expression within the linker script determines
-whether it is absolute or relative. An expression which appears within
-an output section definition is relative to the base of the output
-section. An expression which appears elsewhere will be absolute.
+@smallexample
+@group
+SECTIONS
+ @{
+ . = 0x100;
+ __executable_start = 0x100;
+ .data :
+ @{
+ . = 0x10;
+ __data_start = 0x10;
+ *(.data)
+ @}
+ @dots{}
+ @}
+@end group
+@end smallexample
+
+both @code{.} and @code{__executable_start} are set to the absolute
+address 0x100 in the first two assignments, then both @code{.} and
+@code{__data_start} are set to 0x10 relative to the @code{.data}
+section in the second two assignments.
-A symbol set to a relative expression will be relocatable if you request
-relocatable output using the @samp{-r} option. That means that a
-further link operation may change the value of the symbol. The symbol's
-section will be the section of the relative expression.
+For expressions involving numbers, relative addresses and absolute
+addresses, ld follows these rules to evaluate terms:
+
+@itemize @bullet
+@item
+Unary operations on a relative address, and binary operations on two
+relative addresses in the same section or between one relative address
+and a number, apply the operator to the offset part of the address(es).
+@item
+Unary operations on an absolute address, and binary operations on one
+or more absolute addresses or on two relative addresses not in the
+same section, first convert any non-absolute term to an absolute
+address before applying the operator.
+@end itemize
-A symbol set to an absolute expression will retain the same value
-through any further link operation. The symbol will be absolute, and
-will not have any particular associated section.
+The result section of each sub-expression is as follows:
+
+@itemize @bullet
+@item
+An operation involving only numbers results in a number.
+@item
+The result of comparisons, @samp{&&} and @samp{||} is also a number.
+@item
+The result of other binary arithmetic and logical operations on two
+relative addresses in the same section or two absolute addresess
+(after above conversions) is also a number.
+@item
+The result of other operations on relative addresses or one
+relative address and a number, is a relative address in the same
+section as the relative operand(s).
+@item
+The result of other operations on absolute addresses (after above
+conversions) is an absolute address.
+@end itemize
You can use the builtin function @code{ABSOLUTE} to force an expression
to be absolute when it would otherwise be relative. For example, to
If @samp{ABSOLUTE} were not used, @samp{_edata} would be relative to the
@samp{.data} section.
+Using @code{LOADADDR} also forces an expression absolute, since this
+particular builtin function returns an absolute address.
+
@node Builtin Functions
@subsection Builtin Functions
@cindex functions in expressions
@item ADDR(@var{section})
@kindex ADDR(@var{section})
@cindex section address in expression
-Return the absolute address (the VMA) of the named @var{section}. Your
+Return the address (VMA) of the named @var{section}. Your
script must previously have defined the location of that section. In
-the following example, @code{symbol_1} and @code{symbol_2} are assigned
-identical values:
+the following example, @code{start_of_output_1}, @code{symbol_1} and
+@code{symbol_2} are assigned equivalent values, except that
+@code{symbol_1} will be relative to the @code{.output1} section while
+the other two will be absolute:
@smallexample
@group
SECTIONS @{ @dots{}
@item LOADADDR(@var{section})
@kindex LOADADDR(@var{section})
@cindex section load address in expression
-Return the absolute LMA of the named @var{section}. This is normally
-the same as @code{ADDR}, but it may be different if the @code{AT}
-attribute is used in the output section definition (@pxref{Output
+Return the absolute LMA of the named @var{section}. (@pxref{Output
Section LMA}).
@kindex MAX
option) that value will be returned; otherwise the value will be
@var{default}. At present, the @samp{-T} command-line option can only
be used to set the base address for the ``text'', ``data'', and
-``bss'' sections, but you use @code{SEGMENT_START} with any segment
+``bss'' sections, but you can use @code{SEGMENT_START} with any segment
name.
@item SIZEOF(@var{section})