\input texinfo
@setfilename ld.info
@c Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-@c 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+@c 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
@c Free Software Foundation, Inc.
@syncodeindex ky cp
@c man begin INCLUDE
@set UsesEnvVars
@set GENERIC
@set ARM
+@set C6X
@set H8300
@set HPPA
@set I960
@end ifset
@c man end
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
+@ifnottex
+@dircategory Software development
+@direntry
* Ld: (ld). The GNU linker.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
+@end direntry
+@end ifnottex
@copying
This file documents the @sc{gnu} linker LD
@end ifset
version @value{VERSION}.
-Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2012 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@vskip 0pt plus 1filll
@c man begin COPYRIGHT
-Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2012 Free
+Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
compiler driver) like this:
@smallexample
- gcc -Wl,--startgroup foo.o bar.o -Wl,--endgroup
+ gcc -Wl,--start-group foo.o bar.o -Wl,--end-group
@end smallexample
This is important, because otherwise the compiler driver program may
-silently drop the linker options, resulting in a bad link.
+silently drop the linker options, resulting in a bad link. Confusion
+may also arise when passing options that require values through a
+driver, as the use of a space between option and argument acts as
+a separator, and causes the driver to pass only the option to the linker
+and the argument to the compiler. In this case, it is simplest to use
+the joined forms of both single- and multiple-letter options, such as:
+
+@smallexample
+ gcc foo.o bar.o -Wl,-eENTRY -Wl,-Map=a.map
+@end smallexample
Here is a table of the generic command line switches accepted by the GNU
linker:
@table @gcctabopt
@include at-file.texi
-@kindex -a@var{keyword}
-@item -a@var{keyword}
+@kindex -a @var{keyword}
+@item -a @var{keyword}
This option is supported for HP/UX compatibility. The @var{keyword}
argument must be one of the strings @samp{archive}, @samp{shared}, or
@samp{default}. @samp{-aarchive} is functionally equivalent to
@samp{-Bstatic}, and the other two keywords are functionally equivalent
to @samp{-Bdynamic}. This option may be used any number of times.
+@kindex --audit @var{AUDITLIB}
+@item --audit @var{AUDITLIB}
+Adds @var{AUDITLIB} to the @code{DT_AUDIT} entry of the dynamic section.
+@var{AUDITLIB} is not checked for existence, nor will it use the DT_SONAME
+specified in the library. If specified multiple times @code{DT_AUDIT}
+will contain a colon separated list of audit interfaces to use. If the linker
+finds an object with an audit entry while searching for shared libraries,
+it will add a corresponding @code{DT_DEPAUDIT} entry in the output file.
+This option is only meaningful on ELF platforms supporting the rtld-audit
+interface.
+
@ifset I960
@cindex architectures
-@kindex -A@var{arch}
-@item -A@var{architecture}
+@kindex -A @var{arch}
+@item -A @var{architecture}
@kindex --architecture=@var{arch}
@itemx --architecture=@var{architecture}
In the current release of @command{ld}, this option is useful only for the
script command @code{FORCE_COMMON_ALLOCATION} has the same effect.
@xref{Miscellaneous Commands}.
+@kindex --depaudit @var{AUDITLIB}
+@kindex -P @var{AUDITLIB}
+@item --depaudit @var{AUDITLIB}
+@itemx -P @var{AUDITLIB}
+Adds @var{AUDITLIB} to the @code{DT_DEPAUDIT} entry of the dynamic section.
+@var{AUDITLIB} is not checked for existence, nor will it use the DT_SONAME
+specified in the library. If specified multiple times @code{DT_DEPAUDIT}
+will contain a colon separated list of audit interfaces to use. This
+option is only meaningful on ELF platforms supporting the rtld-audit interface.
+The -P option is provided for Solaris compatibility.
+
@cindex entry point, from command line
@kindex -e @var{entry}
@kindex --entry=@var{entry}
@cindex dynamic symbol table
@kindex -E
@kindex --export-dynamic
+@kindex --no-export-dynamic
@item -E
@itemx --export-dynamic
-When creating a dynamically linked executable, add all symbols to the
-dynamic symbol table. The dynamic symbol table is the set of symbols
-which are visible from dynamic objects at run time.
+@itemx --no-export-dynamic
+When creating a dynamically linked executable, using the @option{-E}
+option or the @option{--export-dynamic} option causes the linker to add
+all symbols to the dynamic symbol table. The dynamic symbol table is the
+set of symbols which are visible from dynamic objects at run time.
-If you do not use this option, the dynamic symbol table will normally
-contain only those symbols which are referenced by some dynamic object
-mentioned in the link.
+If you do not use either of these options (or use the
+@option{--no-export-dynamic} option to restore the default behavior), the
+dynamic symbol table will normally contain only those symbols which are
+referenced by some dynamic object mentioned in the link.
If you use @code{dlopen} to load a dynamic object which needs to refer
back to the symbols defined by the program, rather than some other
be added to the dynamic symbol table if the output format supports it.
See the description of @samp{--dynamic-list}.
+Note that this option is specific to ELF targeted ports. PE targets
+support a similar function to export all symbols from a DLL or EXE; see
+the description of @samp{--export-all-symbols} below.
+
@ifclear SingleFormat
@cindex big-endian objects
@cindex endianness
Link little-endian objects. This affects the default output format.
@end ifclear
-@kindex -f
-@kindex --auxiliary
-@item -f
-@itemx --auxiliary @var{name}
+@kindex -f @var{name}
+@kindex --auxiliary=@var{name}
+@item -f @var{name}
+@itemx --auxiliary=@var{name}
When creating an ELF shared object, set the internal DT_AUXILIARY field
to the specified name. This tells the dynamic linker that the symbol
table of the shared object should be used as an auxiliary filter on the
This option may be specified more than once. The DT_AUXILIARY entries
will be created in the order in which they appear on the command line.
-@kindex -F
-@kindex --filter
+@kindex -F @var{name}
+@kindex --filter=@var{name}
@item -F @var{name}
-@itemx --filter @var{name}
+@itemx --filter=@var{name}
When creating an ELF shared object, set the internal DT_FILTER field to
the specified name. This tells the dynamic linker that the symbol table
of the shared object which is being created should be used as a filter
creating an ELF shared object.
@cindex finalization function
-@kindex -fini
-@item -fini @var{name}
+@kindex -fini=@var{name}
+@item -fini=@var{name}
When creating an ELF executable or shared object, call NAME when the
executable or shared object is unloaded, by setting DT_FINI to the
address of the function. By default, the linker uses @code{_fini} as
@item -g
Ignored. Provided for compatibility with other tools.
-@kindex -G
-@kindex --gpsize
+@kindex -G @var{value}
+@kindex --gpsize=@var{value}
@cindex object size
-@item -G@var{value}
+@item -G @var{value}
@itemx --gpsize=@var{value}
Set the maximum size of objects to be optimized using the GP register to
@var{size}. This is only meaningful for object file formats such as
sections. This is ignored for other object file formats.
@cindex runtime library name
-@kindex -h@var{name}
+@kindex -h @var{name}
@kindex -soname=@var{name}
-@item -h@var{name}
+@item -h @var{name}
@itemx -soname=@var{name}
When creating an ELF shared object, set the internal DT_SONAME field to
the specified name. When an executable is linked with a shared object
Perform an incremental link (same as option @samp{-r}).
@cindex initialization function
-@kindex -init
-@item -init @var{name}
+@kindex -init=@var{name}
+@item -init=@var{name}
When creating an ELF executable or shared object, call NAME when the
executable or shared object is loaded, by setting DT_INIT to the address
of the function. By default, the linker uses @code{_init} as the
function to call.
@cindex archive files, from cmd line
-@kindex -l@var{namespec}
+@kindex -l @var{namespec}
@kindex --library=@var{namespec}
-@item -l@var{namespec}
+@item -l @var{namespec}
@itemx --library=@var{namespec}
Add the archive or object file specified by @var{namespec} to the
list of files to link. This option may be used any number of times.
If @var{namespec} is of the form @file{:@var{filename}}, @command{ld}
-will search the library path for a file called @var{filename}, otherise it
+will search the library path for a file called @var{filename}, otherwise it
will search the library path for a file called @file{lib@var{namespec}.a}.
On systems which support shared libraries, @command{ld} may also search for
@end ifset
@cindex search directory, from cmd line
-@kindex -L@var{dir}
+@kindex -L @var{dir}
@kindex --library-path=@var{dir}
-@item -L@var{searchdir}
+@item -L @var{searchdir}
@itemx --library-path=@var{searchdir}
Add path @var{searchdir} to the list of paths that @command{ld} will search
for archive libraries and @command{ld} control scripts. You may use this
in which they are specified on the command line. Directories specified
on the command line are searched before the default directories. All
@option{-L} options apply to all @option{-l} options, regardless of the
-order in which the options appear.
+order in which the options appear. @option{-L} options do not affect
+how @command{ld} searches for a linker script unless @option{-T}
+option is specified.
If @var{searchdir} begins with @code{=}, then the @code{=} will be replaced
by the @dfn{sysroot prefix}, a path specified when the linker is configured.
@cindex emulation
@kindex -m @var{emulation}
-@item -m@var{emulation}
+@item -m @var{emulation}
Emulate the @var{emulation} linker. You can list the available
emulations with the @samp{--verbose} or @samp{-V} options.
@kindex --nmagic
@item -n
@itemx --nmagic
-Turn off page alignment of sections, and mark the output as
-@code{NMAGIC} if possible.
+Turn off page alignment of sections, and disable linking against shared
+libraries. If the output format supports Unix style magic numbers,
+mark the output as @code{NMAGIC}.
@kindex -N
@kindex --omagic
@item execstack
Marks the object as requiring executable stack.
+@item global
+This option is only meaningful when building a shared object. It makes
+the symbols defined by this shared object available for symbol resolution
+of subsequently loaded libraries.
+
@item initfirst
This option is only meaningful when building a shared object.
It marks the object so that its runtime initialization will occur
@item common-page-size=@var{value}
Set the emulation common page size to @var{value}.
+@item stack-size=@var{value}
+Specify a stack size for in an ELF @code{PT_GNU_STACK} segment.
+Specifying zero will override any default non-zero sized
+@code{PT_GNU_STACK} segment creation.
+
@end table
Other keywords are ignored for Solaris compatibility.
@item --as-needed
@itemx --no-as-needed
This option affects ELF DT_NEEDED tags for dynamic libraries mentioned
-on the command line after the @option{--as-needed} option. Normally,
+on the command line after the @option{--as-needed} option. Normally
the linker will add a DT_NEEDED tag for each dynamic library mentioned
on the command line, regardless of whether the library is actually
-needed. @option{--as-needed} causes a DT_NEEDED tag to only be emitted
-for a library that satisfies a symbol reference from regular objects
-which is undefined at the point that the library was linked, or, if
-the library is not found in the DT_NEEDED lists of other libraries
-linked up to that point, a reference from another dynamic library.
+needed or not. @option{--as-needed} causes a DT_NEEDED tag to only be
+emitted for a library that satisfies an undefined symbol reference
+from a regular object file or, if the library is not found in the
+DT_NEEDED lists of other libraries linked up to that point, an
+undefined symbol reference from another dynamic library.
@option{--no-as-needed} restores the default behaviour.
@kindex --add-needed
@kindex --no-add-needed
@item --add-needed
@itemx --no-add-needed
-This option affects the treatment of dynamic libraries from ELF
-DT_NEEDED tags in dynamic libraries mentioned on the command line after
-the @option{--no-add-needed} option. Normally, the linker will add
-a DT_NEEDED tag for each dynamic library from DT_NEEDED tags.
-@option{--no-add-needed} causes DT_NEEDED tags will never be emitted
-for those libraries from DT_NEEDED tags. @option{--add-needed} restores
-the default behaviour.
+These two options have been deprecated because of the similarity of
+their names to the @option{--as-needed} and @option{--no-as-needed}
+options. They have been replaced by @option{--copy-dt-needed-entries}
+and @option{--no-copy-dt-needed-entries}.
@kindex -assert @var{keyword}
@item -assert @var{keyword}
force checking in that case by using the @option{--check-sections}
option.
+@kindex --copy-dt-needed-entries
+@kindex --no-copy-dt-needed-entries
+@item --copy-dt-needed-entries
+@itemx --no-copy-dt-needed-entries
+This option affects the treatment of dynamic libraries referred to
+by DT_NEEDED tags @emph{inside} ELF dynamic libraries mentioned on the
+command line. Normally the linker won't add a DT_NEEDED tag to the
+output binary for each library mentioned in a DT_NEEDED tag in an
+input dynamic library. With @option{--copy-dt-needed-entries}
+specified on the command line however any dynamic libraries that
+follow it will have their DT_NEEDED entries added. The default
+behaviour can be restored with @option{--no-copy-dt-needed-entries}.
+
+This option also has an effect on the resolution of symbols in dynamic
+libraries. With @option{--copy-dt-needed-entries} dynamic libraries
+mentioned on the command line will be recursively searched, following
+their DT_NEEDED tags to other libraries, in order to resolve symbols
+required by the output binary. With the default setting however
+the searching of dynamic libraries that follow it will stop with the
+dynamic library itself. No DT_NEEDED links will be traversed to resolve
+symbols.
+
@cindex cross reference table
@kindex --cref
@item --cref
paths for runtime symbol resolution.
@cindex symbols, from command line
-@kindex --defsym @var{symbol}=@var{exp}
-@item --defsym @var{symbol}=@var{expression}
+@kindex --defsym=@var{symbol}=@var{exp}
+@item --defsym=@var{symbol}=@var{expression}
Create a global symbol in the output file, containing the absolute
address given by @var{expression}. You may use this option as many
times as necessary to define multiple symbols in the command line. A
@cindex dynamic linker, from command line
@kindex -I@var{file}
-@kindex --dynamic-linker @var{file}
-@item --dynamic-linker @var{file}
+@kindex --dynamic-linker=@var{file}
+@item -I@var{file}
+@itemx --dynamic-linker=@var{file}
Set the name of the dynamic linker. This is only meaningful when
generating dynamically linked ELF executables. The default dynamic
linker is normally correct; don't use this unless you know what you are
relocations. See @samp{--entry} and @samp{--undefined}.
This option can be set when doing a partial link (enabled with option
-@samp{-r}). In this case the root of symbols kept must be explicitely
+@samp{-r}). In this case the root of symbols kept must be explicitly
specified either by an @samp{--entry} or @samp{--undefined} option or by
a @code{ENTRY} command in the linker script.
be restored by specifying @samp{--no-print-gc-sections} on the command
line.
+@kindex --print-output-format
+@cindex output format
+@item --print-output-format
+Print the name of the default output format (perhaps influenced by
+other command-line options). This is the string that would appear
+in an @code{OUTPUT_FORMAT} linker script command (@pxref{File Commands}).
+
@cindex help
@cindex usage
@kindex --help
@item --target-help
Print a summary of all target specific options on the standard output and exit.
-@kindex -Map
-@item -Map @var{mapfile}
+@kindex -Map=@var{mapfile}
+@item -Map=@var{mapfile}
Print a link map to the file @var{mapfile}. See the description of the
@option{-M} option, above.
(including linker scripts specified on the command line) are ignored.
@ifclear SingleFormat
-@kindex --oformat
-@item --oformat @var{output-format}
+@kindex --oformat=@var{output-format}
+@item --oformat=@var{output-format}
@command{ld} may be configured to support more than one kind of object
file. If your @command{ld} is configured this way, you can use the
@samp{--oformat} option to specify the binary format for the output
@kindex --relax
@cindex synthesizing linker
@cindex relaxing addressing modes
+@cindex --no-relax
@item --relax
+@itemx --no-relax
An option with machine dependent effects.
@ifset GENERIC
This option is only supported on a few targets.
@xref{PowerPC ELF32,,@command{ld} and PowerPC 32-bit ELF Support}.
@end ifset
-On some platforms, the @samp{--relax} option performs global
-optimizations that become possible when the linker resolves addressing
-in the program, such as relaxing address modes and synthesizing new
-instructions in the output object file.
+On some platforms the @samp{--relax} option performs target specific,
+global optimizations that become possible when the linker resolves
+addressing in the program, such as relaxing address modes,
+synthesizing new instructions, selecting shorter version of current
+instructions, and combining constant values.
On some platforms these link time global optimizations may make symbolic
debugging of the resulting executable impossible.
@ifset GENERIC
-This is known to be
-the case for the Matsushita MN10200 and MN10300 family of processors.
+This is known to be the case for the Matsushita MN10200 and MN10300
+family of processors.
@end ifset
@ifset GENERIC
but ignored.
@end ifset
+On platforms where @samp{--relax} is accepted the option
+@samp{--no-relax} can be used to disable the feature.
+
@cindex retaining specified symbols
@cindex stripping all but some symbols
@cindex symbols, retaining selectively
-@item --retain-symbols-file @var{filename}
+@kindex --retain-symbols-file=@var{filename}
+@item --retain-symbols-file=@var{filename}
Retain @emph{only} the symbols listed in the file @var{filename},
discarding all others. @var{filename} is simply a flat file, with one
symbol name per line. This option is especially useful in environments
line. It overrides @samp{-s} and @samp{-S}.
@ifset GENERIC
-@item -rpath @var{dir}
+@item -rpath=@var{dir}
@cindex runtime library search path
-@kindex -rpath
+@kindex -rpath=@var{dir}
Add a directory to the runtime library search path. This is used when
linking an ELF executable with shared objects. All @option{-rpath}
arguments are concatenated and passed to the runtime linker, which uses
@ifset GENERIC
@cindex link-time runtime library search path
-@kindex -rpath-link
-@item -rpath-link @var{DIR}
+@kindex -rpath-link=@var{dir}
+@item -rpath-link=@var{dir}
When using ELF or SunOS, one shared library may require another. This
happens when an @code{ld -shared} link includes a shared library as one
of the input files.
shared library if the @option{-e} option is not used and there are
undefined symbols in the link.
-@item --sort-common [= ascending | descending]
@kindex --sort-common
+@item --sort-common
+@itemx --sort-common=ascending
+@itemx --sort-common=descending
This option tells @command{ld} to sort the common symbols by alignment in
ascending or descending order when it places them in the appropriate output
sections. The symbol alignments considered are sixteen-byte or larger,
between symbols due to alignment constraints. If no sorting order is
specified, then descending order is assumed.
-@kindex --sort-section name
-@item --sort-section name
+@kindex --sort-section=name
+@item --sort-section=name
This option will apply @code{SORT_BY_NAME} to all wildcard section
patterns in the linker script.
-@kindex --sort-section alignment
-@item --sort-section alignment
+@kindex --sort-section=alignment
+@item --sort-section=alignment
This option will apply @code{SORT_BY_ALIGNMENT} to all wildcard section
patterns in the linker script.
@kindex --split-by-file
-@item --split-by-file [@var{size}]
+@item --split-by-file[=@var{size}]
Similar to @option{--split-by-reloc} but creates a new output section for
each input file when @var{size} is reached. @var{size} defaults to a
size of 1 if not given.
@kindex --split-by-reloc
-@item --split-by-reloc [@var{count}]
+@item --split-by-reloc[=@var{count}]
Tries to creates extra sections in the output file so that no single
output section in the file contains more than @var{count} relocations.
This is useful when generating huge relocatable files for downloading into
Compute and display statistics about the operation of the linker, such
as execution time and memory usage.
-@kindex --sysroot
+@kindex --sysroot=@var{directory}
@item --sysroot=@var{directory}
Use @var{directory} as the location of the sysroot, overriding the
configure-time default. This option is only supported by linkers
trouble). The @samp{--traditional-format} switch tells @command{ld} to not
combine duplicate entries.
-@kindex --section-start @var{sectionname}=@var{org}
-@item --section-start @var{sectionname}=@var{org}
+@kindex --section-start=@var{sectionname}=@var{org}
+@item --section-start=@var{sectionname}=@var{org}
Locate a section in the output file at the absolute
address given by @var{org}. You may use this option as many
times as necessary to locate multiple sections in the command
should be no white space between @var{sectionname}, the equals
sign (``@key{=}''), and @var{org}.
-@kindex -Tbss @var{org}
-@kindex -Tdata @var{org}
-@kindex -Ttext @var{org}
+@kindex -Tbss=@var{org}
+@kindex -Tdata=@var{org}
+@kindex -Ttext=@var{org}
@cindex segment origins, cmd line
-@item -Tbss @var{org}
-@itemx -Tdata @var{org}
-@itemx -Ttext @var{org}
-Same as --section-start, with @code{.bss}, @code{.data} or
+@item -Tbss=@var{org}
+@itemx -Tdata=@var{org}
+@itemx -Ttext=@var{org}
+Same as @option{--section-start}, with @code{.bss}, @code{.data} or
@code{.text} as the @var{sectionname}.
-@kindex -Ttext-segment @var{org}
-@itemx -Ttext-segment @var{org}
+@kindex -Ttext-segment=@var{org}
+@item -Ttext-segment=@var{org}
@cindex text segment origin, cmd line
When creating an ELF executable or shared object, it will set the address
of the first byte of the text segment.
unresolved symbol but the option @option{--warn-unresolved-symbols}
can change this to a warning.
-@kindex --verbose
-@cindex verbose
+@kindex --verbose[=@var{NUMBER}]
+@cindex verbose[=@var{NUMBER}]
@item --dll-verbose
-@itemx --verbose
+@itemx --verbose[=@var{NUMBER}]
Display the version number for @command{ld} and list the linker emulations
supported. Display which input files can and cannot be opened. Display
-the linker script being used by the linker.
+the linker script being used by the linker. If the optional @var{NUMBER}
+argument > 1, plugin symbol status will also be displayed.
@kindex --version-script=@var{version-scriptfile}
@cindex version script, symbol versions
-@itemx --version-script=@var{version-scriptfile}
+@item --version-script=@var{version-scriptfile}
Specify the name of a version script to the linker. This is typically
used when creating shared libraries to specify additional information
about the version hierarchy for the library being created. This option
-is only meaningful on ELF platforms which support shared libraries.
-@xref{VERSION}.
+is only fully supported on ELF platforms which support shared libraries;
+see @ref{VERSION}. It is partially supported on PE platforms, which can
+use version scripts to filter symbol visibility in auto-export mode: any
+symbols marked @samp{local} in the version script will not be exported.
+@xref{WIN32}.
@kindex --warn-common
@cindex warnings, on combining symbols
@cindex combining symbols, warnings on
@item --warn-common
Warn when a common symbol is combined with another common symbol or with
-a symbol definition. Unix linkers allow this somewhat sloppy practise,
+a symbol definition. Unix linkers allow this somewhat sloppy practice,
but linkers on some other operating systems do not. This option allows
you to find potential problems from combining global symbols.
-Unfortunately, some C libraries use this practise, so you may get some
+Unfortunately, some C libraries use this practice, so you may get some
warnings about symbols in the libraries as well as in your programs.
There are three kinds of global symbols, illustrated here by C examples:
@item --warn-shared-textrel
Warn if the linker adds a DT_TEXTREL to a shared object.
+@kindex --warn-alternate-em
+@item --warn-alternate-em
+Warn if an object has alternate ELF machine code.
+
@kindex --warn-unresolved-symbols
@item --warn-unresolved-symbols
If the linker is going to report an unresolved symbol (see the option
list of archives, because gcc will add its own list of archives to
your link and you may not want this flag to affect those as well.
-@kindex --wrap
-@item --wrap @var{symbol}
+@kindex --wrap=@var{symbol}
+@item --wrap=@var{symbol}
Use a wrapper function for @var{symbol}. Any undefined reference to
@var{symbol} will be resolved to @code{__wrap_@var{symbol}}. Any
undefined reference to @code{__real_@var{symbol}} will be resolved to
Request creation of @code{.eh_frame_hdr} section and ELF
@code{PT_GNU_EH_FRAME} segment header.
+@kindex --ld-generated-unwind-info
+@item --no-ld-generated-unwind-info
+Request creation of @code{.eh_frame} unwind info for linker
+generated code sections like PLT. This option is on by default
+if linker generated unwind info is supported.
+
@kindex --enable-new-dtags
@kindex --disable-new-dtags
@item --enable-new-dtags
file.
[This option is specific to the i386 PE targeted port of the linker]
+@kindex --enable-long-section-names
+@kindex --disable-long-section-names
+@item --enable-long-section-names
+@itemx --disable-long-section-names
+The PE variants of the Coff object format add an extension that permits
+the use of section names longer than eight characters, the normal limit
+for Coff. By default, these names are only allowed in object files, as
+fully-linked executable images do not carry the Coff string table required
+to support the longer names. As a GNU extension, it is possible to
+allow their use in executable images as well, or to (probably pointlessly!)
+disallow it in object files, by using these two options. Executable images
+generated with these long section names are slightly non-standard, carrying
+as they do a string table, and may generate confusing output when examined
+with non-GNU PE-aware tools, such as file viewers and dumpers. However,
+GDB relies on the use of PE long section names to find Dwarf-2 debug
+information sections in an executable image at runtime, and so if neither
+option is specified on the command-line, @command{ld} will enable long
+section names, overriding the default and technically correct behaviour,
+when it finds the presence of debug information while linking an executable
+image and not stripping symbols.
+[This option is valid for all PE targeted ports of the linker]
+
@kindex --enable-stdcall-fixup
@kindex --disable-stdcall-fixup
@item --enable-stdcall-fixup
mismatches are considered to be errors.
[This option is specific to the i386 PE targeted port of the linker]
+@kindex --leading-underscore
+@kindex --no-leading-underscore
+@item --leading-underscore
+@itemx --no-leading-underscore
+For most targets default symbol-prefix is an underscore and is defined
+in target's description. By this option it is possible to
+disable/enable the default underscore symbol-prefix.
+
@cindex DLLs, creating
@kindex --export-all-symbols
@item --export-all-symbols
exported. The symbol names may be delimited by commas or colons.
[This option is specific to the i386 PE targeted port of the linker]
+@kindex --exclude-all-symbols
+@item --exclude-all-symbols
+Specifies no symbols should be automatically exported.
+[This option is specific to the i386 PE targeted port of the linker]
+
@kindex --file-alignment
@item --file-alignment
Specify the file alignment. Sections in the file will always begin at
A third method of dealing with this difficulty is to abandon
'auto-import' for the offending symbol and mark it with
-@code{__declspec(dllimport)}. However, in practise that
+@code{__declspec(dllimport)}. However, in practice that
requires using compile-time #defines to indicate whether you are
building a DLL, building client code that will link to the DLL, or
merely building/linking to a static library. In making the choice
@var{which}.
[This option is specific to the i386 PE targeted port of the linker]
+The following options set flags in the @code{DllCharacteristics} field
+of the PE file header:
+[These options are specific to PE targeted ports of the linker]
+
+@kindex --dynamicbase
+@item --dynamicbase
+The image base address may be relocated using address space layout
+randomization (ASLR). This feature was introduced with MS Windows
+Vista for i386 PE targets.
+
+@kindex --forceinteg
+@item --forceinteg
+Code integrity checks are enforced.
+
+@kindex --nxcompat
+@item --nxcompat
+The image is compatible with the Data Execution Prevention.
+This feature was introduced with MS Windows XP SP2 for i386 PE targets.
+
+@kindex --no-isolation
+@item --no-isolation
+Although the image understands isolation, do not isolate the image.
+
+@kindex --no-seh
+@item --no-seh
+The image does not use SEH. No SE handler may be called from
+this image.
+
+@kindex --no-bind
+@item --no-bind
+Do not bind this image.
+
+@kindex --wdmdriver
+@item --wdmdriver
+The driver uses the MS Windows Driver Model.
+
+@kindex --tsaware
+@item --tsaware
+The image is Terminal Server aware.
+
+@end table
+
+@c man end
+
+@ifset C6X
+@subsection Options specific to C6X uClinux targets
+
+@c man begin OPTIONS
+
+The C6X uClinux target uses a binary format called DSBT to support shared
+libraries. Each shared library in the system needs to have a unique index;
+all executables use an index of 0.
+
+@table @gcctabopt
+
+@kindex --dsbt-size
+@item --dsbt-size @var{size}
+This option sets the number of entires in the DSBT of the current executable
+or shared library to @var{size}. The default is to create a table with 64
+entries.
+
+@kindex --dsbt-index
+@item --dsbt-index @var{index}
+This option sets the DSBT index of the current executable or shared library
+to @var{index}. The default is 0, which is appropriate for generating
+executables. If a shared library is generated with a DSBT index of 0, the
+@code{R_C6000_DSBT_INDEX} relocs are copied into the output file.
+
+@kindex --no-merge-exidx-entries
+The @samp{--no-merge-exidx-entries} switch disables the merging of adjacent
+exidx entries in frame unwind info.
+
@end table
@c man end
+@end ifset
@ifset M68HC11
@subsection Options specific to Motorola 68HC11 and 68HC12 targets
* Format Commands:: Commands dealing with object file formats
@end ifclear
+* REGION_ALIAS:: Assign alias names to memory regions
* Miscellaneous Commands:: Other linker script commands
@end menu
@item
the @code{ENTRY(@var{symbol})} command in a linker script;
@item
-the value of the symbol @code{start}, if defined;
+the value of a target specific symbol, if it is defined; For many
+targets this is @code{start}, but PE and BeOS based systems for example
+check a list of possible entry symbols, matching the first one found.
@item
the address of the first byte of the @samp{.text} section, if present;
@item
@end table
@end ifclear
+@node REGION_ALIAS
+@subsection Assign alias names to memory regions
+@kindex REGION_ALIAS(@var{alias}, @var{region})
+@cindex region alias
+@cindex region names
+
+Alias names can be added to existing memory regions created with the
+@ref{MEMORY} command. Each name corresponds to at most one memory region.
+
+@smallexample
+REGION_ALIAS(@var{alias}, @var{region})
+@end smallexample
+
+The @code{REGION_ALIAS} function creates an alias name @var{alias} for the
+memory region @var{region}. This allows a flexible mapping of output sections
+to memory regions. An example follows.
+
+Suppose we have an application for embedded systems which come with various
+memory storage devices. All have a general purpose, volatile memory @code{RAM}
+that allows code execution or data storage. Some may have a read-only,
+non-volatile memory @code{ROM} that allows code execution and read-only data
+access. The last variant is a read-only, non-volatile memory @code{ROM2} with
+read-only data access and no code execution capability. We have four output
+sections:
+
+@itemize @bullet
+@item
+@code{.text} program code;
+@item
+@code{.rodata} read-only data;
+@item
+@code{.data} read-write initialized data;
+@item
+@code{.bss} read-write zero initialized data.
+@end itemize
+
+The goal is to provide a linker command file that contains a system independent
+part defining the output sections and a system dependent part mapping the
+output sections to the memory regions available on the system. Our embedded
+systems come with three different memory setups @code{A}, @code{B} and
+@code{C}:
+@multitable @columnfractions .25 .25 .25 .25
+@item Section @tab Variant A @tab Variant B @tab Variant C
+@item .text @tab RAM @tab ROM @tab ROM
+@item .rodata @tab RAM @tab ROM @tab ROM2
+@item .data @tab RAM @tab RAM/ROM @tab RAM/ROM2
+@item .bss @tab RAM @tab RAM @tab RAM
+@end multitable
+The notation @code{RAM/ROM} or @code{RAM/ROM2} means that this section is
+loaded into region @code{ROM} or @code{ROM2} respectively. Please note that
+the load address of the @code{.data} section starts in all three variants at
+the end of the @code{.rodata} section.
+
+The base linker script that deals with the output sections follows. It
+includes the system dependent @code{linkcmds.memory} file that describes the
+memory layout:
+@smallexample
+INCLUDE linkcmds.memory
+
+SECTIONS
+ @{
+ .text :
+ @{
+ *(.text)
+ @} > REGION_TEXT
+ .rodata :
+ @{
+ *(.rodata)
+ rodata_end = .;
+ @} > REGION_RODATA
+ .data : AT (rodata_end)
+ @{
+ data_start = .;
+ *(.data)
+ @} > REGION_DATA
+ data_size = SIZEOF(.data);
+ data_load_start = LOADADDR(.data);
+ .bss :
+ @{
+ *(.bss)
+ @} > REGION_BSS
+ @}
+@end smallexample
+
+Now we need three different @code{linkcmds.memory} files to define memory
+regions and alias names. The content of @code{linkcmds.memory} for the three
+variants @code{A}, @code{B} and @code{C}:
+@table @code
+@item A
+Here everything goes into the @code{RAM}.
+@smallexample
+MEMORY
+ @{
+ RAM : ORIGIN = 0, LENGTH = 4M
+ @}
+
+REGION_ALIAS("REGION_TEXT", RAM);
+REGION_ALIAS("REGION_RODATA", RAM);
+REGION_ALIAS("REGION_DATA", RAM);
+REGION_ALIAS("REGION_BSS", RAM);
+@end smallexample
+@item B
+Program code and read-only data go into the @code{ROM}. Read-write data goes
+into the @code{RAM}. An image of the initialized data is loaded into the
+@code{ROM} and will be copied during system start into the @code{RAM}.
+@smallexample
+MEMORY
+ @{
+ ROM : ORIGIN = 0, LENGTH = 3M
+ RAM : ORIGIN = 0x10000000, LENGTH = 1M
+ @}
+
+REGION_ALIAS("REGION_TEXT", ROM);
+REGION_ALIAS("REGION_RODATA", ROM);
+REGION_ALIAS("REGION_DATA", RAM);
+REGION_ALIAS("REGION_BSS", RAM);
+@end smallexample
+@item C
+Program code goes into the @code{ROM}. Read-only data goes into the
+@code{ROM2}. Read-write data goes into the @code{RAM}. An image of the
+initialized data is loaded into the @code{ROM2} and will be copied during
+system start into the @code{RAM}.
+@smallexample
+MEMORY
+ @{
+ ROM : ORIGIN = 0, LENGTH = 2M
+ ROM2 : ORIGIN = 0x10000000, LENGTH = 1M
+ RAM : ORIGIN = 0x20000000, LENGTH = 1M
+ @}
+
+REGION_ALIAS("REGION_TEXT", ROM);
+REGION_ALIAS("REGION_RODATA", ROM2);
+REGION_ALIAS("REGION_DATA", RAM);
+REGION_ALIAS("REGION_BSS", RAM);
+@end smallexample
+@end table
+
+It is possible to write a common system initialization routine to copy the
+@code{.data} section from @code{ROM} or @code{ROM2} into the @code{RAM} if
+necessary:
+@smallexample
+#include <string.h>
+
+extern char data_start [];
+extern char data_size [];
+extern char data_load_start [];
+
+void copy_data(void)
+@{
+ if (data_start != data_load_start)
+ @{
+ memcpy(data_start, data_load_start, (size_t) data_size);
+ @}
+@}
+@end smallexample
+
@node Miscellaneous Commands
@subsection Other Linker Script Commands
There are a few other linker scripts commands.
architecture of an object file by using the @code{objdump} program with
the @samp{-f} option.
@end ifclear
+
+@item LD_FEATURE(@var{string})
+@kindex LD_FEATURE(@var{string})
+This command may be used to modify @command{ld} behavior. If
+@var{string} is @code{"SANE_EXPR"} then absolute symbols and numbers
+in a script are simply treated as numbers everywhere.
+@xref{Expression Section}.
@end table
@node Assignments
@menu
* Simple Assignments:: Simple Assignments
+* HIDDEN:: HIDDEN
* PROVIDE:: PROVIDE
* PROVIDE_HIDDEN:: PROVIDE_HIDDEN
* Source Code Reference:: How to use a linker script defined symbol in source code
defined as the address following the @samp{.text} output section aligned
upward to a 4 byte boundary.
+@node HIDDEN
+@subsection HIDDEN
+@cindex HIDDEN
+For ELF targeted ports, define a symbol that will be hidden and won't be
+exported. The syntax is @code{HIDDEN(@var{symbol} = @var{expression})}.
+
+Here is the example from @ref{Simple Assignments}, rewritten to use
+@code{HIDDEN}:
+
+@smallexample
+HIDDEN(floating_point = 0);
+SECTIONS
+@{
+ .text :
+ @{
+ *(.text)
+ HIDDEN(_etext = .);
+ @}
+ HIDDEN(_bdata = (. + 3) & ~ 3);
+ .data : @{ *(.data) @}
+@}
+@end smallexample
+@noindent
+In this case none of the three symbols will be visible outside this module.
+
@node PROVIDE
@subsection PROVIDE
@cindex PROVIDE
@smallexample
@group
@var{section} [@var{address}] [(@var{type})] :
- [AT(@var{lma})] [ALIGN(@var{section_align})] [SUBALIGN(@var{subsection_align})]
+ [AT(@var{lma})]
+ [ALIGN(@var{section_align})]
+ [SUBALIGN(@var{subsection_align})]
+ [@var{constraint}]
@{
@var{output-section-command}
@var{output-section-command}
@cindex address, section
@cindex section address
The @var{address} is an expression for the VMA (the virtual memory
-address) of the output section. If you do not provide @var{address},
-the linker will set it based on @var{region} if present, or otherwise
-based on the current value of the location counter.
-
-If you provide @var{address}, the address of the output section will be
-set to precisely that. If you provide neither @var{address} nor
-@var{region}, then the address of the output section will be set to the
-current value of the location counter aligned to the alignment
-requirements of the output section. The alignment requirement of the
-output section is the strictest alignment of any input section contained
-within the output section.
-
-For example,
+address) of the output section. This address is optional, but if it
+is provided then the output address will be set exactly as specified.
+
+If the output address is not specified then one will be chosen for the
+section, based on the heuristic below. This address will be adjusted
+to fit the alignment requirement of the output section. The
+alignment requirement is the strictest alignment of any input section
+contained within the output section.
+
+The output section address heuristic is as follows:
+
+@itemize @bullet
+@item
+If an output memory @var{region} is set for the section then it
+is added to this region and its address will be the next free address
+in that region.
+
+@item
+If the MEMORY command has been used to create a list of memory
+regions then the first region which has attributes compatible with the
+section is selected to contain it. The section's output address will
+be the next free address in that region; @ref{MEMORY}.
+
+@item
+If no memory regions were specified, or none match the section then
+the output address will be based on the current value of the location
+counter.
+@end itemize
+
+@noindent
+For example:
+
@smallexample
.text . : @{ *(.text) @}
@end smallexample
+
@noindent
and
+
@smallexample
.text : @{ *(.text) @}
@end smallexample
+
@noindent
are subtly different. The first will set the address of the
@samp{.text} output section to the current value of the location
counter. The second will set it to the current value of the location
-counter aligned to the strictest alignment of a @samp{.text} input
-section.
+counter aligned to the strictest alignment of any of the @samp{.text}
+input sections.
The @var{address} may be an arbitrary expression; @ref{Expressions}.
For example, if you want to align the section on a 0x10 byte boundary,
aligned upward to the specified value.
Specifying @var{address} for a section will change the value of the
-location counter.
+location counter, provided that the section is non-empty. (Empty
+sections are ignored).
@node Input Section
@subsection Input Section Description
data.o(.data)
@end smallexample
+To refine the sections that are included based on the section flags
+of an input section, INPUT_SECTION_FLAGS may be used.
+
+Here is a simple example for using Section header flags for ELF sections:
+
+@smallexample
+@group
+SECTIONS @{
+ .text : @{ INPUT_SECTION_FLAGS (SHF_MERGE & SHF_STRINGS) *(.text) @}
+ .text2 : @{ INPUT_SECTION_FLAGS (!SHF_WRITE) *(.text) @}
+@}
+@end group
+@end smallexample
+
+In this example, the output section @samp{.text} will be comprised of any
+input section matching the name *(.text) whose section header flags
+@code{SHF_MERGE} and @code{SHF_STRINGS} are set. The output section
+@samp{.text2} will be comprised of any input section matching the name *(.text)
+whose section header flag @code{SHF_WRITE} is clear.
+
You can also specify files within archives by writing a pattern
matching the archive, a colon, then the pattern matching the file,
with no whitespace around the colon.
difference is @code{SORT_BY_ALIGNMENT} will sort sections into
ascending order by alignment before placing them in the output file.
+@cindex SORT_BY_INIT_PRIORITY
+@code{SORT_BY_INIT_PRIORITY} is very similar to @code{SORT_BY_NAME}. The
+difference is @code{SORT_BY_INIT_PRIORITY} will sort sections into
+ascending order by numerical value of the GCC init_priority attribute
+encoded in the section name before placing them in the output file.
+
@cindex SORT
@code{SORT} is an alias for @code{SORT_BY_NAME}.
If the section sorting command in linker script is nested, the
command line option will be ignored.
+@cindex SORT_NONE
+@code{SORT_NONE} disables section sorting by ignoring the command line
+section sorting option.
+
If you ever get confused about where input sections are going, use the
@samp{-M} linker option to generate a map file. The map file shows
precisely how input sections are mapped to output sections.
@cindex output section attributes
We showed above that the full description of an output section looked
like this:
+
@smallexample
@group
@var{section} [@var{address}] [(@var{type})] :
- [AT(@var{lma})] [ALIGN(@var{section_align})] [SUBALIGN(@var{subsection_align})]
+ [AT(@var{lma})]
+ [ALIGN(@var{section_align})]
+ [SUBALIGN(@var{subsection_align})]
+ [@var{constraint}]
@{
@var{output-section-command}
@var{output-section-command}
@} [>@var{region}] [AT>@var{lma_region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}]
@end group
@end smallexample
+
We've already described @var{section}, @var{address}, and
@var{output-section-command}. In this section we will describe the
remaining section attributes.
* Output Section LMA:: Output section LMA
* Forced Output Alignment:: Forced Output Alignment
* Forced Input Alignment:: Forced Input Alignment
+* Output Section Constraint:: Output section constraint
* Output Section Region:: Output section region
* Output Section Phdr:: Output section phdr
* Output Section Fill:: Output section fill
the input sections which map into it. You can override this by using
the section type. For example, in the script sample below, the
@samp{ROM} section is addressed at memory location @samp{0} and does not
-need to be loaded when the program is run. The contents of the
-@samp{ROM} section will appear in the linker output file as usual.
+need to be loaded when the program is run.
@smallexample
@group
SECTIONS @{
@cindex load address
@cindex section load address
Every section has a virtual address (VMA) and a load address (LMA); see
-@ref{Basic Script Concepts}. The address expression which may appear in
-an output section description sets the VMA (@pxref{Output Section
-Address}).
-
-The expression @var{lma} that follows the @code{AT} keyword specifies
-the load address of the section.
+@ref{Basic Script Concepts}. The virtual address is specified by the
+@pxref{Output Section Address} described earlier. The load address is
+specified by the @code{AT} or @code{AT>} keywords. Specifying a load
+address is optional.
-Alternatively, with @samp{AT>@var{lma_region}} expression, you may
-specify a memory region for the section's load address. @xref{MEMORY}.
-Note that if the section has not had a VMA assigned to it then the
-linker will use the @var{lma_region} as the VMA region as well.
+The @code{AT} keyword takes an expression as an argument. This
+specifies the exact load address of the section. The @code{AT>} keyword
+takes the name of a memory region as an argument. @xref{MEMORY}. The
+load address of the section is set to the next free address in the
+region, aligned to the section's alignment requirements.
If neither @code{AT} nor @code{AT>} is specified for an allocatable
-section, the linker will set the LMA such that the difference between
-VMA and LMA for the section is the same as the preceding output
-section in the same region. If there is no preceding output section
-or the section is not allocatable, the linker will set the LMA equal
-to the VMA.
-@xref{Output Section Region}.
+section, the linker will use the following heuristic to determine the
+load address:
+
+@itemize @bullet
+@item
+If the section has a specific VMA address, then this is used as
+the LMA address as well.
+
+@item
+If the section is not allocatable then its LMA is set to its VMA.
+
+@item
+Otherwise if a memory region can be found that is compatible
+with the current section, and this region contains at least one
+section, then the LMA is set so the difference between the
+VMA and LMA is the same as the difference between the VMA and LMA of
+the last section in the located region.
+
+@item
+If no memory regions have been declared then a default region
+that covers the entire address space is used in the previous step.
+
+@item
+If no suitable region could be found, or there was no previous
+section then the LMA is set equal to the VMA.
+@end itemize
@cindex ROM initialized data
@cindex initialized data in ROM
char *src = &_etext;
char *dst = &_data;
-/* ROM has data at end of text; copy it. */
-while (dst < &_edata) @{
+/* ROM has data at end of text; copy it. */
+while (dst < &_edata)
*dst++ = *src++;
-@}
-/* Zero bss */
+/* Zero bss. */
for (dst = &_bstart; dst< &_bend; dst++)
*dst = 0;
@end group
SUBALIGN. The value specified overrides any alignment given by input
sections, whether larger or smaller.
+@node Output Section Constraint
+@subsubsection Output Section Constraint
+@kindex ONLY_IF_RO
+@kindex ONLY_IF_RW
+@cindex constraints on output sections
+You can specify that an output section should only be created if all
+of its input sections are read-only or all of its input sections are
+read-write by using the keyword @code{ONLY_IF_RO} and
+@code{ONLY_IF_RW} respectively.
+
@node Output Section Region
@subsubsection Output Section Region
@kindex >@var{region}
Everything is optional except @code{OVERLAY} (a keyword), and each
section must have a name (@var{secname1} and @var{secname2} above). The
section definitions within the @code{OVERLAY} construct are identical to
-those within the general @code{SECTIONS} contruct (@pxref{SECTIONS}),
+those within the general @code{SECTIONS} construct (@pxref{SECTIONS}),
except that no addresses and no memory regions may be defined for
sections within an @code{OVERLAY}.
region. The region name has no meaning outside of the linker script.
Region names are stored in a separate name space, and will not conflict
with symbol names, file names, or section names. Each memory region
-must have a distinct name.
+must have a distinct name within the @code{MEMORY} command. However you can
+add later alias names to existing memory regions with the @ref{REGION_ALIAS}
+command.
@cindex memory region attributes
The @var{attr} string is an optional list of attributes that specify
@item L
Same as @samp{I}
@item !
-Invert the sense of any of the preceding attributes
+Invert the sense of any of the attributes that follow
@end table
If a unmapped section matches any of the listed attributes other than
of the linker script. It is not put into the output file. Program
header names are stored in a separate name space, and will not conflict
with symbol names, file names, or section names. Each program header
-must have a distinct name.
+must have a distinct name. The headers are processed in order and it
+is usual for them to map to sections in ascending load address order.
Certain program header types describe segments of memory which the
system loader will load from the file. In the linker script, you
@kindex FILEHDR
@kindex PHDRS
-You may use the @code{FILEHDR} and @code{PHDRS} keywords appear after
+You may use the @code{FILEHDR} and @code{PHDRS} keywords after
the program header type to further describe the contents of the segment.
The @code{FILEHDR} keyword means that the segment should include the ELF
file header. The @code{PHDRS} keyword means that the segment should
-include the ELF program headers themselves.
+include the ELF program headers themselves. If applied to a loadable
+segment (@code{PT_LOAD}), all prior loadable segments must have one of
+these keywords.
The @var{type} may be one of the following. The numbers indicate the
value of the keyword.
bar1; bar2;
extern "C++" @{
ns::*;
- "int f(int, double)";
- @}
+ "f(int, double)";
+ @};
@} VERS_1.2;
@end smallexample
The supported @samp{lang}s are @samp{C}, @samp{C++}, and @samp{Java}.
The linker will iterate over the list of symbols at the link time and
demangle them according to @samp{lang} before matching them to the
-patterns specified in @samp{version-script-commands}.
+patterns specified in @samp{version-script-commands}. The default
+@samp{lang} is @samp{C}.
Demangled names may contains spaces and other special characters. As
described above, you can use a glob pattern to match demangled names,
@menu
* Constants:: Constants
+* Symbolic Constants:: Symbolic constants
* Symbols:: Symbol Names
* Orphan Sections:: Orphan Sections
* Location Counter:: The Location Counter
As in C, the linker considers an integer beginning with @samp{0} to be
octal, and an integer beginning with @samp{0x} or @samp{0X} to be
hexadecimal. Alternatively the linker accepts suffixes of @samp{h} or
-@samp{H} for hexadeciaml, @samp{o} or @samp{O} for octal, @samp{b} or
+@samp{H} for hexadecimal, @samp{o} or @samp{O} for octal, @samp{b} or
@samp{B} for binary and @samp{d} or @samp{D} for decimal. Any integer
value without a prefix or a suffix is considered to be decimal.
Note - the @code{K} and @code{M} suffixes cannot be used in
conjunction with the base suffixes mentioned above.
+@node Symbolic Constants
+@subsection Symbolic Constants
+@cindex symbolic constants
+@kindex CONSTANT
+It is possible to refer to target specific constants via the use of
+the @code{CONSTANT(@var{name})} operator, where @var{name} is one of:
+
+@table @code
+@item MAXPAGESIZE
+@kindex MAXPAGESIZE
+The target's maximum page size.
+
+@item COMMONPAGESIZE
+@kindex COMMONPAGESIZE
+The target's default page size.
+@end table
+
+So for example:
+
+@smallexample
+ .text ALIGN (CONSTANT (MAXPAGESIZE)) : @{ *(.text) @}
+@end smallexample
+
+will create a text section aligned to the largest page boundary
+supported by the target.
+
@node Symbols
@subsection Symbol Names
@cindex symbol names
If an orphaned section's name is representable as a C identifier then
the linker will automatically @pxref{PROVIDE} two symbols:
-__start_SECNAME and __end_SECNAME, where SECNAME is the name of the
+__start_SECNAME and __stop_SECNAME, where SECNAME is the name of the
section. These indicate the start address and end address of the
orphaned section respectively. Note: most section names are not
representable as C identifiers because they contain a @samp{.}
@cindex absolute and relocatable symbols
@cindex relocatable and absolute symbols
@cindex symbols, relocatable and absolute
-When the linker evaluates an expression, the result is either absolute
-or relative to some section. A relative expression is expressed as a
-fixed offset from the base of a section.
+Addresses and symbols may be section relative, or absolute. A section
+relative symbol is relocatable. If you request relocatable output
+using the @samp{-r} option, a further link operation may change the
+value of a section relative symbol. On the other hand, an absolute
+symbol will retain the same value throughout any further link
+operations.
+
+Some terms in linker expressions are addresses. This is true of
+section relative symbols and for builtin functions that return an
+address, such as @code{ADDR}, @code{LOADADDR}, @code{ORIGIN} and
+@code{SEGMENT_START}. Other terms are simply numbers, or are builtin
+functions that return a non-address value, such as @code{LENGTH}.
+One complication is that unless you set @code{LD_FEATURE ("SANE_EXPR")}
+(@pxref{Miscellaneous Commands}), numbers and absolute symbols are treated
+differently depending on their location, for compatibility with older
+versions of @code{ld}. Expressions appearing outside an output
+section definition treat all numbers as absolute addresses.
+Expressions appearing inside an output section definition treat
+absolute symbols as numbers. If @code{LD_FEATURE ("SANE_EXPR")} is
+given, then absolute symbols and numbers are simply treated as numbers
+everywhere.
+
+In the following simple example,
+
+@smallexample
+@group
+SECTIONS
+ @{
+ . = 0x100;
+ __executable_start = 0x100;
+ .data :
+ @{
+ . = 0x10;
+ __data_start = 0x10;
+ *(.data)
+ @}
+ @dots{}
+ @}
+@end group
+@end smallexample
+
+both @code{.} and @code{__executable_start} are set to the absolute
+address 0x100 in the first two assignments, then both @code{.} and
+@code{__data_start} are set to 0x10 relative to the @code{.data}
+section in the second two assignments.
-The position of the expression within the linker script determines
-whether it is absolute or relative. An expression which appears within
-an output section definition is relative to the base of the output
-section. An expression which appears elsewhere will be absolute.
+For expressions involving numbers, relative addresses and absolute
+addresses, ld follows these rules to evaluate terms:
-A symbol set to a relative expression will be relocatable if you request
-relocatable output using the @samp{-r} option. That means that a
-further link operation may change the value of the symbol. The symbol's
-section will be the section of the relative expression.
+@itemize @bullet
+@item
+Unary operations on an absolute address or number, and binary
+operations on two absolute addresses or two numbers, or between one
+absolute address and a number, apply the operator to the value(s).
+@item
+Unary operations on a relative address, and binary operations on two
+relative addresses in the same section or between one relative address
+and a number, apply the operator to the offset part of the address(es).
+@item
+Other binary operations, that is, between two relative addresses not
+in the same section, or between a relative address and an absolute
+address, first convert any non-absolute term to an absolute address
+before applying the operator.
+@end itemize
-A symbol set to an absolute expression will retain the same value
-through any further link operation. The symbol will be absolute, and
-will not have any particular associated section.
+The result section of each sub-expression is as follows:
+
+@itemize @bullet
+@item
+An operation involving only numbers results in a number.
+@item
+The result of comparisons, @samp{&&} and @samp{||} is also a number.
+@item
+The result of other binary arithmetic and logical operations on two
+relative addresses in the same section or two absolute addresses
+(after above conversions) is also a number.
+@item
+The result of other operations on relative addresses or one
+relative address and a number, is a relative address in the same
+section as the relative operand(s).
+@item
+The result of other operations on absolute addresses (after above
+conversions) is an absolute address.
+@end itemize
You can use the builtin function @code{ABSOLUTE} to force an expression
to be absolute when it would otherwise be relative. For example, to
If @samp{ABSOLUTE} were not used, @samp{_edata} would be relative to the
@samp{.data} section.
+Using @code{LOADADDR} also forces an expression absolute, since this
+particular builtin function returns an absolute address.
+
@node Builtin Functions
@subsection Builtin Functions
@cindex functions in expressions
@item ADDR(@var{section})
@kindex ADDR(@var{section})
@cindex section address in expression
-Return the absolute address (the VMA) of the named @var{section}. Your
+Return the address (VMA) of the named @var{section}. Your
script must previously have defined the location of that section. In
-the following example, @code{symbol_1} and @code{symbol_2} are assigned
-identical values:
+the following example, @code{start_of_output_1}, @code{symbol_1} and
+@code{symbol_2} are assigned equivalent values, except that
+@code{symbol_1} will be relative to the @code{.output1} section while
+the other two will be absolute:
@smallexample
@group
SECTIONS @{ @dots{}
@item LOADADDR(@var{section})
@kindex LOADADDR(@var{section})
@cindex section load address in expression
-Return the absolute LMA of the named @var{section}. This is normally
-the same as @code{ADDR}, but it may be different if the @code{AT}
-attribute is used in the output section definition (@pxref{Output
+Return the absolute LMA of the named @var{section}. (@pxref{Output
Section LMA}).
@kindex MAX
option) that value will be returned; otherwise the value will be
@var{default}. At present, the @samp{-T} command-line option can only
be used to set the base address for the ``text'', ``data'', and
-``bss'' sections, but you use @code{SEGMENT_START} with any segment
+``bss'' sections, but you can use @code{SEGMENT_START} with any segment
name.
@item SIZEOF(@var{section})
target subroutine is a leaf routine (that is, the target subroutine does
not itself call any subroutines).
+@cindex Cortex-A8 erratum workaround
+@kindex --fix-cortex-a8
+@kindex --no-fix-cortex-a8
+The @samp{--fix-cortex-a8} switch enables a link-time workaround for an erratum in certain Cortex-A8 processors. The workaround is enabled by default if you are targeting the ARM v7-A architecture profile. It can be enabled otherwise by specifying @samp{--fix-cortex-a8}, or disabled unconditionally by specifying @samp{--no-fix-cortex-a8}.
+
+The erratum only affects Thumb-2 code. Please contact ARM for further details.
+
+@kindex --merge-exidx-entries
+@kindex --no-merge-exidx-entries
+The @samp{--no-merge-exidx-entries} switch disables the merging of adjacent exidx entries in debuginfo.
+
@ifclear GENERIC
@lowersections
@end ifclear
@kindex --use-nul-prefixed-import-tables
The @samp{--use-nul-prefixed-import-tables} switch is specifying, that
the import tables idata4 and idata5 have to be generated with a zero
-elememt prefix for import libraries. This is the old style to generate
+element prefix for import libraries. This is the old style to generate
import tables. By default this option is turned off.
@cindex BE8
This allows generation of libraries/applications that work on ARMv4 cores
and are still interworking safe. Note that the above veneer clobbers the
-condition flags, so may cause incorrect progrm behavior in rare cases.
+condition flags, so may cause incorrect program behavior in rare cases.
@cindex USE_BLX
@kindex --use-blx
the veneer. The extra cycles required to call and return from the veneer
are sufficient to avoid the erratum in both the scalar and vector cases.
+@cindex ARM1176 erratum workaround
+@kindex --fix-arm1176
+@kindex --no-fix-arm1176
+The @samp{--fix-arm1176} switch enables a link-time workaround for an erratum
+in certain ARM1176 processors. The workaround is enabled by default if you
+are targeting ARM v6 (excluding ARM v6T2) or earlier. It can be disabled
+unconditionally by specifying @samp{--no-fix-arm1176}.
+
+Further information is available in the ``ARM1176JZ-S and ARM1176JZF-S
+Programmer Advice Notice'' available on the ARM documentation website at:
+http://infocenter.arm.com/.
+
@cindex NO_ENUM_SIZE_WARNING
@kindex --no-enum-size-warning
The @option{--no-enum-size-warning} switch prevents the linker from
placement of these sequences of instructions - called stubs - is
controlled by the command line option @option{--stub-group-size=N}.
The placement is important because a poor choice can create a need for
-duplicate stubs, increasing the code sizw. The linker will try to
+duplicate stubs, increasing the code size. The linker will try to
group stubs together in order to reduce interruptions to the flow of
code, but it needs guidance as to how big these groups should be and
where they should be placed.
The value of @samp{N}, the parameter to the
@option{--stub-group-size=} option controls where the stub groups are
-placed. If it is negative then all stubs are placed before the first
+placed. If it is negative then all stubs are placed after the first
branch that needs them. If it is positive then the stubs can be
placed either before or after the branches that need them. If the
value of @samp{N} is 1 (either +1 or -1) then the linker will choose
@samp{--relax} enables the generation of trampolines that can access
the entire 32-bit address space. These trampolines are inserted at
section boundaries, so may not themselves be reachable if an input
-section exceeds 33M in size.
+section exceeds 33M in size. You may combine @samp{-r} and
+@samp{--relax} to add trampolines in a partial link. In that case
+both branches to undefined symbols and inter-section branches are also
+considered potentially out of range, and trampolines inserted.
@cindex PowerPC ELF32 options
@table @option
@cindex PowerPC64 multi-TOC
@kindex --no-multi-toc
@item --no-multi-toc
-By default, PowerPC64 GCC generates code for a TOC model where TOC
+If given any toc option besides @code{-mcmodel=medium} or
+@code{-mcmodel=large}, PowerPC64 GCC generates code for a TOC model
+where TOC
entries are accessed with a 16-bit offset from r2. This limits the
total TOC size to 64K. PowerPC64 @command{ld} extends this limit by
grouping code sections such that each group uses less than 64K for its
help if a single input file has a @code{.toc} section that exceeds
64K, most likely from linking multiple files with @command{ld -r}.
Use this option to turn off this feature.
+
+@cindex PowerPC64 TOC sorting
+@kindex --no-toc-sort
+@item --no-toc-sort
+By default, @command{ld} sorts TOC sections so that those whose file
+happens to have a section called @code{.init} or @code{.fini} are
+placed first, followed by TOC sections referenced by code generated
+with PowerPC64 gcc's @code{-mcmodel=small}, and lastly TOC sections
+referenced only by code generated with PowerPC64 gcc's
+@code{-mcmodel=medium} or @code{-mcmodel=large} options. Doing this
+results in better TOC grouping for multi-TOC. Use this option to turn
+off this feature.
+
+@cindex PowerPC64 PLT stub alignment
+@kindex --plt-align
+@kindex --no-plt-align
+@item --plt-align
+@itemx --no-plt-align
+Use these options to control whether individual PLT call stubs are
+aligned to a 32-byte boundary, or to the specified power of two
+boundary when using @code{--plt-align=}. By default PLT call stubs
+are packed tightly.
+
+@cindex PowerPC64 PLT call stub static chain
+@kindex --plt-static-chain
+@kindex --no-plt-static-chain
+@item --plt-static-chain
+@itemx --no-plt-static-chain
+Use these options to control whether PLT call stubs load the static
+chain pointer (r11). @code{ld} defaults to not loading the static
+chain since there is never any need to do so on a PLT call.
+
+@cindex PowerPC64 PLT call stub thread safety
+@kindex --plt-thread-safe
+@kindex --no-plt-thread-safe
+@item --plt-thread-safe
+@itemx --no-thread-safe
+With power7's weakly ordered memory model, it is possible when using
+lazy binding for ld.so to update a plt entry in one thread and have
+another thread see the individual plt entry words update in the wrong
+order, despite ld.so carefully writing in the correct order and using
+memory write barriers. To avoid this we need some sort of read
+barrier in the call stub, or use LD_BIND_NOW=1. By default, @code{ld}
+looks for calls to commonly used functions that create threads, and if
+seen, adds the necessary barriers. Use these options to change the
+default behaviour.
@end table
@ifclear GENERIC
@item --exclude-symbols
@item --exclude-libs
@item --exclude-modules-for-implib
+@item --version-script
@end itemize
-If, however, @samp{--export-all-symbols} is not given explicitly on the
+When auto-export is in operation, @command{ld} will export all the non-local
+(global and common) symbols it finds in a DLL, with the exception of a few
+symbols known to belong to the system's runtime and libraries. As it will
+often not be desirable to export all of a DLL's symbols, which may include
+private functions that are not part of any public interface, the command-line
+options listed above may be used to filter symbols out from the list for
+exporting. The @samp{--output-def} option can be used in order to see the
+final list of exported symbols with all exclusions taken into effect.
+
+If @samp{--export-all-symbols} is not given explicitly on the
command line, then the default auto-export behavior will be @emph{disabled}
if either of the following are true:
_bar = bar
another_foo = abc.dll.afoo
var1 DATA
+doo = foo == foo2
+eoo DATA == var1
@end example
-This example defines a DLL with a non-default base address and five
+This example defines a DLL with a non-default base address and seven
symbols in the export table. The third exported symbol @code{_bar} is an
alias for the second. The fourth symbol, @code{another_foo} is resolved
by "forwarding" to another module and treating it as an alias for
@code{afoo} exported from the DLL @samp{abc.dll}. The final symbol
-@code{var1} is declared to be a data object.
+@code{var1} is declared to be a data object. The @samp{doo} symbol in
+export library is an alias of @samp{foo}, which gets the string name
+in export table @samp{foo2}. The @samp{eoo} symbol is an data export
+symbol, which gets in export table the name @samp{var1}.
The optional @code{LIBRARY <name>} command indicates the @emph{internal}
name of the output DLL. If @samp{<name>} does not include a suffix,
EXPORTS
( ( ( <name1> [ = <name2> ] )
| ( <name1> = <module-name> . <external-name>))
- [ @@ <integer> ] [NONAME] [DATA] [CONSTANT] [PRIVATE] ) *
+ [ @@ <integer> ] [NONAME] [DATA] [CONSTANT] [PRIVATE] [== <name3>] ) *
@end example
Declares @samp{<name1>} as an exported symbol from the DLL, or declares
@samp{<name1>} as a "forward" alias for the symbol
@samp{<external-name>} in the DLL @samp{<module-name>}.
Optionally, the symbol may be exported by the specified ordinal
-@samp{<integer>} alias.
+@samp{<integer>} alias. The optional @samp{<name3>} is the to be used
+string in import/export table for the symbol.
The optional keywords that follow the declaration indicate:
As a GNU extension, weak symbols that do not specify an alternate symbol
are supported. If the symbol is undefined when linking, the symbol
uses a default value.
+
+@cindex aligned common symbols
+@item aligned common symbols
+As a GNU extension to the PE file format, it is possible to specify the
+desired alignment for a common symbol. This information is conveyed from
+the assembler or compiler to the linker by means of GNU-specific commands
+carried in the object file's @samp{.drectve} section, which are recognized
+by @command{ld} and respected when laying out the common symbols. Native
+tools will be able to process object files employing this GNU extension,
+but will fail to respect the alignment instructions, and may issue noisy
+warnings about unknown linker directives.
@end table
@ifclear GENERIC
@cindex Xtensa options
@table @option
-@kindex --no-relax
-@item --no-relax
-Since the Xtensa version of @code{ld} enables the @option{--relax} option
-by default, the @option{--no-relax} option is provided to disable
-relaxation.
-
@item --size-opt
When optimizing indirect calls to direct calls, optimize for code size
more than performance. With this option, the linker will not insert