@end ifset
version @value{VERSION}.
-Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000,
+Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
@vskip 0pt plus 1filll
@c man begin COPYRIGHT
-Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free
+Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@samp{-Bstatic}, and the other two keywords are functionally equivalent
to @samp{-Bdynamic}. This option may be used any number of times.
+@kindex --audit @var{AUDITLIB}
+@item --audit @var{AUDITLIB}
+Adds @var{AUDITLIB} to the @code{DT_AUDIT} entry of the dynamic section.
+@var{AUDITLIB} is not checked for existence, nor will it use the DT_SONAME
+specified in the library. If specified multiple times @code{DT_AUDIT}
+will contain a colon separated list of audit interfaces to use. If the linker
+finds an object with an audit entry while searching for shared libraries,
+it will add a corresponding @code{DT_DEPAUDIT} entry in the output file.
+This option is only meaningful on ELF platforms supporting the rtld-audit
+interface.
+
@ifset I960
@cindex architectures
@kindex -A @var{arch}
script command @code{FORCE_COMMON_ALLOCATION} has the same effect.
@xref{Miscellaneous Commands}.
+@kindex --depaudit @var{AUDITLIB}
+@kindex -P @var{AUDITLIB}
+@item --depaudit @var{AUDITLIB}
+@itemx -P @var{AUDITLIB}
+Adds @var{AUDITLIB} to the @code{DT_DEPAUDIT} entry of the dynamic section.
+@var{AUDITLIB} is not checked for existence, nor will it use the DT_SONAME
+specified in the library. If specified multiple times @code{DT_DEPAUDIT}
+will contain a colon separated list of audit interfaces to use. This
+option is only meaningful on ELF platforms supporting the rtld-audit interface.
+The -P option is provided for Solaris compatibility.
+
@cindex entry point, from command line
@kindex -e @var{entry}
@kindex --entry=@var{entry}
Add the archive or object file specified by @var{namespec} to the
list of files to link. This option may be used any number of times.
If @var{namespec} is of the form @file{:@var{filename}}, @command{ld}
-will search the library path for a file called @var{filename}, otherise it
+will search the library path for a file called @var{filename}, otherwise it
will search the library path for a file called @file{lib@var{namespec}.a}.
On systems which support shared libraries, @command{ld} may also search for
@kindex --nmagic
@item -n
@itemx --nmagic
-Turn off page alignment of sections, and mark the output as
-@code{NMAGIC} if possible.
+Turn off page alignment of sections, and disable linking against shared
+libraries. If the output format supports Unix style magic numbers,
+mark the output as @code{NMAGIC}.
@kindex -N
@kindex --omagic
@item --as-needed
@itemx --no-as-needed
This option affects ELF DT_NEEDED tags for dynamic libraries mentioned
-on the command line after the @option{--as-needed} option. Normally,
+on the command line after the @option{--as-needed} option. Normally
the linker will add a DT_NEEDED tag for each dynamic library mentioned
on the command line, regardless of whether the library is actually
-needed. @option{--as-needed} causes a DT_NEEDED tag to only be emitted
-for a library that satisfies a symbol reference from regular objects
-which is undefined at the point that the library was linked, or, if
-the library is not found in the DT_NEEDED lists of other libraries
-linked up to that point, a reference from another dynamic library.
+needed or not. @option{--as-needed} causes a DT_NEEDED tag to only be
+emitted for a library that satisfies an undefined symbol reference
+from a regular object file or, if the library is not found in the
+DT_NEEDED lists of other libraries linked up to that point, an
+undefined symbol reference from another dynamic library.
@option{--no-as-needed} restores the default behaviour.
@kindex --add-needed
@kindex --no-add-needed
@item --add-needed
@itemx --no-add-needed
-This option affects the treatment of dynamic libraries from ELF
-DT_NEEDED tags in dynamic libraries mentioned on the command line after
-the @option{--no-add-needed} option. Normally, the linker will add
-a DT_NEEDED tag for each dynamic library from DT_NEEDED tags.
-@option{--no-add-needed} causes DT_NEEDED tags will never be emitted
-for those libraries from DT_NEEDED tags. @option{--add-needed} restores
-the default behaviour.
+These two options have been deprecated because of the similarity of
+their names to the @option{--as-needed} and @option{--no-as-needed}
+options. They have been replaced by @option{--copy-dt-needed-entries}
+and @option{--no-copy-dt-needed-entries}.
@kindex -assert @var{keyword}
@item -assert @var{keyword}
force checking in that case by using the @option{--check-sections}
option.
+@kindex --copy-dt-needed-entries
+@kindex --no-copy-dt-needed-entries
+@item --copy-dt-needed-entries
+@itemx --no-copy-dt-needed-entries
+This option affects the treatment of dynamic libraries referred to
+by DT_NEEDED tags @emph{inside} ELF dynamic libraries mentioned on the
+command line. Normally the linker will add a DT_NEEDED tag to the
+output binary for each library mentioned in a DT_NEEDED tag in an
+input dynamic library. With @option{--no-copy-dt-needed-entries}
+specified on the command line however any dynamic libraries that
+follow it will have their DT_NEEDED entries ignored. The default
+behaviour can be restored with @option{--copy-dt-needed-entries}.
+
+This option also has an effect on the resolution of symbols in dynamic
+libraries. With the default setting dynamic libraries mentioned on
+the command line will be recursively searched, following their
+DT_NEEDED tags to other libraries, in order to resolve symbols
+required by the output binary. With
+@option{--no-copy-dt-needed-entries} specified however the searching
+of dynamic libraries that follow it will stop with the dynamic
+library itself. No DT_NEEDED links will be traversed to resolve
+symbols.
+
@cindex cross reference table
@kindex --cref
@item --cref
relocations. See @samp{--entry} and @samp{--undefined}.
This option can be set when doing a partial link (enabled with option
-@samp{-r}). In this case the root of symbols kept must be explicitely
+@samp{-r}). In this case the root of symbols kept must be explicitly
specified either by an @samp{--entry} or @samp{--undefined} option or by
a @code{ENTRY} command in the linker script.
@kindex --relax
@cindex synthesizing linker
@cindex relaxing addressing modes
+@cindex --no-relax
@item --relax
+@itemx --no-relax
An option with machine dependent effects.
@ifset GENERIC
This option is only supported on a few targets.
@xref{PowerPC ELF32,,@command{ld} and PowerPC 32-bit ELF Support}.
@end ifset
-On some platforms, the @samp{--relax} option performs global
-optimizations that become possible when the linker resolves addressing
-in the program, such as relaxing address modes and synthesizing new
-instructions in the output object file.
+On some platforms the @samp{--relax} option performs target specific,
+global optimizations that become possible when the linker resolves
+addressing in the program, such as relaxing address modes,
+synthesizing new instructions, selecting shorter version of current
+instructions, and combinig constant values.
On some platforms these link time global optimizations may make symbolic
debugging of the resulting executable impossible.
@ifset GENERIC
-This is known to be
-the case for the Matsushita MN10200 and MN10300 family of processors.
+This is known to be the case for the Matsushita MN10200 and MN10300
+family of processors.
@end ifset
@ifset GENERIC
but ignored.
@end ifset
+On platforms where @samp{--relax} is accepted the option
+@samp{--no-relax} can be used to disable the feature.
+
@cindex retaining specified symbols
@cindex stripping all but some symbols
@cindex symbols, retaining selectively
Specify the name of a version script to the linker. This is typically
used when creating shared libraries to specify additional information
about the version hierarchy for the library being created. This option
-is only meaningful on ELF platforms which support shared libraries.
-@xref{VERSION}.
+is only fully supported on ELF platforms which support shared libraries;
+see @ref{VERSION}. It is partially supported on PE platforms, which can
+use version scripts to filter symbol visibility in auto-export mode: any
+symbols marked @samp{local} in the version script will not be exported.
+@xref{WIN32}.
@kindex --warn-common
@cindex warnings, on combining symbols
mismatches are considered to be errors.
[This option is specific to the i386 PE targeted port of the linker]
+@kindex --leading-underscore
+@kindex --no-leading-underscore
+@item --leading-underscore
+@itemx --no-leading-underscore
+For most targets default symbol-prefix is an underscore and is defined
+in target's description. By this option it is possible to
+disable/enable the default underscore symbol-prefix.
+
@cindex DLLs, creating
@kindex --export-all-symbols
@item --export-all-symbols
exported. The symbol names may be delimited by commas or colons.
[This option is specific to the i386 PE targeted port of the linker]
+@kindex --exclude-all-symbols
+@item --exclude-all-symbols
+Specifies no symbols should be automatically exported.
+[This option is specific to the i386 PE targeted port of the linker]
+
@kindex --file-alignment
@item --file-alignment
Specify the file alignment. Sections in the file will always begin at
@item
the @code{ENTRY(@var{symbol})} command in a linker script;
@item
-the value of the symbol @code{start}, if defined;
+the value of a target specific symbol, if it is defined; For many
+targets this is @code{start}, but PE and BeOS based systems for example
+check a list of possible entry symbols, matching the first one found.
@item
the address of the first byte of the @samp{.text} section, if present;
@item
of the linker script. It is not put into the output file. Program
header names are stored in a separate name space, and will not conflict
with symbol names, file names, or section names. Each program header
-must have a distinct name.
+must have a distinct name. The headers are processed in order and it
+is usual for them to map to sections in ascending load address order.
Certain program header types describe segments of memory which the
system loader will load from the file. In the linker script, you
@kindex FILEHDR
@kindex PHDRS
-You may use the @code{FILEHDR} and @code{PHDRS} keywords appear after
+You may use the @code{FILEHDR} and @code{PHDRS} keywords after
the program header type to further describe the contents of the segment.
The @code{FILEHDR} keyword means that the segment should include the ELF
file header. The @code{PHDRS} keyword means that the segment should
-include the ELF program headers themselves.
+include the ELF program headers themselves. If applied to a loadable
+segment (@code{PT_LOAD}), all prior loadable segments must have one of
+these keywords.
The @var{type} may be one of the following. The numbers indicate the
value of the keyword.
bar1; bar2;
extern "C++" @{
ns::*;
- "int f(int, double)";
- @}
+ "f(int, double)";
+ @};
@} VERS_1.2;
@end smallexample
The supported @samp{lang}s are @samp{C}, @samp{C++}, and @samp{Java}.
The linker will iterate over the list of symbols at the link time and
demangle them according to @samp{lang} before matching them to the
-patterns specified in @samp{version-script-commands}.
+patterns specified in @samp{version-script-commands}. The default
+@samp{lang} is @samp{C}.
Demangled names may contains spaces and other special characters. As
described above, you can use a glob pattern to match demangled names,
@cindex absolute and relocatable symbols
@cindex relocatable and absolute symbols
@cindex symbols, relocatable and absolute
-When the linker evaluates an expression, the result is either absolute
-or relative to some section. A relative expression is expressed as a
-fixed offset from the base of a section.
+Addresses and symbols may be section relative, or absolute. A section
+relative symbol is relocatable. If you request relocatable output
+using the @samp{-r} option, a further link operation may change the
+value of a section relative symbol. On the other hand, an absolute
+symbol will retain the same value throughout any further link
+operations.
+
+Some terms in linker expressions are addresses. This is true of all
+symbols and for builtin functions that return an address, such as
+@code{ADDR}, @code{LOADADDR}, @code{ORIGIN} and @code{SEGMENT_START}.
+Other terms are simply numbers, or are builtin functions that return a
+non-address value, such as @code{LENGTH}.
+
+When the linker evaluates an expression, the result depends on where
+the expression is located in a linker script. Expressions appearing
+outside an output section definitions are evaluated with all terms
+first being converted to absolute addresses before applying operators,
+and evaluate to an absolute address result. Expressions appearing
+inside an output section definition are evaluated with more complex
+rules, but the aim is to treat terms as relative addresses and produce
+a relative address result. In particular, an assignment of a number
+to a symbol results in a symbol relative to the output section with an
+offset given by the number. So, in the following simple example,
+
+@smallexample
+@group
+SECTIONS
+ @{
+ . = 0x100;
+ __executable_start = 0x100;
+ .data :
+ @{
+ . = 0x10;
+ __data_start = 0x10;
+ *(.data)
+ @}
+ @dots{}
+ @}
+@end group
+@end smallexample
+
+both @code{.} and @code{__executable_start} are set to the absolute
+address 0x100 in the first two assignments, then both @code{.} and
+@code{__data_start} are set to 0x10 relative to the @code{.data}
+section in the second two assignments.
+
+For expressions appearing inside an output section definition
+involving numbers, relative addresses and absolute addresses, ld
+follows these rules to evaluate terms:
-The position of the expression within the linker script determines
-whether it is absolute or relative. An expression which appears within
-an output section definition is relative to the base of the output
-section. An expression which appears elsewhere will be absolute.
+@itemize @bullet
+@item
+Unary operations on a relative address, and binary operations on two
+relative addresses in the same section or between one relative address
+and a number, apply the operator to the offset part of the address(es).
+@item
+Unary operations on an absolute address, and binary operations on one
+or more absolute addresses or on two relative addresses not in the
+same section, first convert any non-absolute term to an absolute
+address before applying the operator.
+@end itemize
-A symbol set to a relative expression will be relocatable if you request
-relocatable output using the @samp{-r} option. That means that a
-further link operation may change the value of the symbol. The symbol's
-section will be the section of the relative expression.
+The result section of each sub-expression is as follows:
-A symbol set to an absolute expression will retain the same value
-through any further link operation. The symbol will be absolute, and
-will not have any particular associated section.
+@itemize @bullet
+@item
+An operation involving only numbers results in a number.
+@item
+The result of comparisons, @samp{&&} and @samp{||} is also a number.
+@item
+The result of other operations on relative addresses (after above
+conversions) is a relative address in the same section as the operand(s).
+@item
+The result of other operations on absolute addresses (after above
+conversions) is an absolute address.
+@end itemize
You can use the builtin function @code{ABSOLUTE} to force an expression
to be absolute when it would otherwise be relative. For example, to
If @samp{ABSOLUTE} were not used, @samp{_edata} would be relative to the
@samp{.data} section.
+Using @code{LOADADDR} also forces an expression absolute, since this
+particular builtin function returns an absolute address.
+
@node Builtin Functions
@subsection Builtin Functions
@cindex functions in expressions
@item ADDR(@var{section})
@kindex ADDR(@var{section})
@cindex section address in expression
-Return the absolute address (the VMA) of the named @var{section}. Your
+Return the address (VMA) of the named @var{section}. Your
script must previously have defined the location of that section. In
-the following example, @code{symbol_1} and @code{symbol_2} are assigned
-identical values:
+the following example, @code{start_of_output_1}, @code{symbol_1} and
+@code{symbol_2} are assigned equivalent values, except that
+@code{symbol_1} will be relative to the @code{.output1} section while
+the other two will be absolute:
@smallexample
@group
SECTIONS @{ @dots{}
@item LOADADDR(@var{section})
@kindex LOADADDR(@var{section})
@cindex section load address in expression
-Return the absolute LMA of the named @var{section}. This is normally
-the same as @code{ADDR}, but it may be different if the @code{AT}
-attribute is used in the output section definition (@pxref{Output
+Return the absolute LMA of the named @var{section}. (@pxref{Output
Section LMA}).
@kindex MAX
option) that value will be returned; otherwise the value will be
@var{default}. At present, the @samp{-T} command-line option can only
be used to set the base address for the ``text'', ``data'', and
-``bss'' sections, but you use @code{SEGMENT_START} with any segment
+``bss'' sections, but you can use @code{SEGMENT_START} with any segment
name.
@item SIZEOF(@var{section})
target subroutine is a leaf routine (that is, the target subroutine does
not itself call any subroutines).
+@cindex Cortex-A8 erratum workaround
+@kindex --fix-cortex-a8
+@kindex --no-fix-cortex-a8
+The @samp{--fix-cortex-a8} switch enables a link-time workaround for an erratum in certain Cortex-A8 processors. The workaround is enabled by default if you are targeting the ARM v7-A architecture profile. It can be enabled otherwise by specifying @samp{--fix-cortex-a8}, or disabled unconditionally by specifying @samp{--no-fix-cortex-a8}.
+
+The erratum only affects Thumb-2 code. Please contact ARM for further details.
+
+@kindex --merge-exidx-entries
+@kindex --no-merge-exidx-entries
+The @samp{--no-merge-exidx-entries} switch disables the merging of adjacent exidx entries in debuginfo.
+
@ifclear GENERIC
@lowersections
@end ifclear
@samp{--relax} enables the generation of trampolines that can access
the entire 32-bit address space. These trampolines are inserted at
section boundaries, so may not themselves be reachable if an input
-section exceeds 33M in size.
+section exceeds 33M in size. You may combine @samp{-r} and
+@samp{--relax} to add trampolines in a partial link. In that case
+both branches to undefined symbols and inter-section branches are also
+considered potentially out of range, and trampolines inserted.
@cindex PowerPC ELF32 options
@table @option
@item --exclude-symbols
@item --exclude-libs
@item --exclude-modules-for-implib
+@item --version-script
@end itemize
-If, however, @samp{--export-all-symbols} is not given explicitly on the
+When auto-export is in operation, @command{ld} will export all the non-local
+(global and common) symbols it finds in a DLL, with the exception of a few
+symbols known to belong to the system's runtime and libraries. As it will
+often not be desirable to export all of a DLL's symbols, which may include
+private functions that are not part of any public interface, the command-line
+options listed above may be used to filter symbols out from the list for
+exporting. The @samp{--output-def} option can be used in order to see the
+final list of exported symbols with all exclusions taken into effect.
+
+If @samp{--export-all-symbols} is not given explicitly on the
command line, then the default auto-export behavior will be @emph{disabled}
if either of the following are true:
_bar = bar
another_foo = abc.dll.afoo
var1 DATA
+doo = foo == foo2
+eoo DATA == var1
@end example
-This example defines a DLL with a non-default base address and five
+This example defines a DLL with a non-default base address and seven
symbols in the export table. The third exported symbol @code{_bar} is an
alias for the second. The fourth symbol, @code{another_foo} is resolved
by "forwarding" to another module and treating it as an alias for
@code{afoo} exported from the DLL @samp{abc.dll}. The final symbol
-@code{var1} is declared to be a data object.
+@code{var1} is declared to be a data object. The @samp{doo} symbol in
+export library is an alias of @samp{foo}, which gets the string name
+in export table @samp{foo2}. The @samp{eoo} symbol is an data export
+symbol, which gets in export table the name @samp{var1}.
The optional @code{LIBRARY <name>} command indicates the @emph{internal}
name of the output DLL. If @samp{<name>} does not include a suffix,
EXPORTS
( ( ( <name1> [ = <name2> ] )
| ( <name1> = <module-name> . <external-name>))
- [ @@ <integer> ] [NONAME] [DATA] [CONSTANT] [PRIVATE] ) *
+ [ @@ <integer> ] [NONAME] [DATA] [CONSTANT] [PRIVATE] [== <name3>] ) *
@end example
Declares @samp{<name1>} as an exported symbol from the DLL, or declares
@samp{<name1>} as a "forward" alias for the symbol
@samp{<external-name>} in the DLL @samp{<module-name>}.
Optionally, the symbol may be exported by the specified ordinal
-@samp{<integer>} alias.
+@samp{<integer>} alias. The optional @samp{<name3>} is the to be used
+string in import/export table for the symbol.
The optional keywords that follow the declaration indicate:
As a GNU extension, weak symbols that do not specify an alternate symbol
are supported. If the symbol is undefined when linking, the symbol
uses a default value.
+
+@cindex aligned common symbols
+@item aligned common symbols
+As a GNU extension to the PE file format, it is possible to specify the
+desired alignment for a common symbol. This information is conveyed from
+the assembler or compiler to the linker by means of GNU-specific commands
+carried in the object file's @samp{.drectve} section, which are recognized
+by @command{ld} and respected when laying out the common symbols. Native
+tools will be able to process object files employing this GNU extension,
+but will fail to respect the alignment instructions, and may issue noisy
+warnings about unknown linker directives.
@end table
@ifclear GENERIC
@cindex Xtensa options
@table @option
-@kindex --no-relax
-@item --no-relax
-Since the Xtensa version of @code{ld} enables the @option{--relax} option
-by default, the @option{--no-relax} option is provided to disable
-relaxation.
-
@item --size-opt
When optimizing indirect calls to direct calls, optimize for code size
more than performance. With this option, the linker will not insert
projects / deliverable / binutils-gdb.git / blobdiff