\input texinfo
@setfilename ld.info
@c Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-@c 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+@c 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
@syncodeindex ky cp
@include configdoc.texi
@c (configdoc.texi is generated by the Makefile)
@samp{0} for base 8). @xref{Entry Point}, for a discussion of defaults
and other ways of specifying the entry point.
+@kindex --exclude-libs
+@item --exclude-libs @var{lib},@var{lib},...
+Specifies a list of archive libraries from which symbols should not be automatically
+exported. The library names may be delimited by commas or colons. Specifying
+@code{--exclude-libs ALL} excludes symbols in all archive libraries from
+automatic export. This option is available only for the i386 PE targeted
+port of the linker and for ELF targeted ports. For i386 PE, symbols
+explicitly listed in a .def file are still exported, regardless of this
+option. For ELF targeted ports, symbols affected by this option will
+be treated as hidden.
+
@cindex dynamic symbol table
@kindex -E
@kindex --export-dynamic
on the command line after the @option{--as-needed} option. Normally,
the linker will add a DT_NEEDED tag for each dynamic library mentioned
on the command line, regardless of whether the library is actually
-needed. @option{--as-needed} causes DT_NEEDED tags to only be emitted
-for libraries that satisfy some reference from regular objects.
+needed. @option{--as-needed} causes DT_NEEDED tags to only be emitted
+for libraries that satisfy some symbol reference from regular objects
+which is undefined at the point that the library was linked.
@option{--no-as-needed} restores the default behaviour.
@kindex --add-needed
it. This option disallows symbols with undefined version and a fatal error
will be issued instead.
+@kindex --default-symver
+@item --default-symver
+Create and use a default symbol version (the soname) for unversioned
+exported symbols.
+
+@kindex --default-imported-symver
+@item --default-imported-symver
+Create and use a default symbol version (the soname) for unversioned
+imported symbols.
+
@kindex --no-warn-mismatch
@item --no-warn-mismatch
Normally @command{ld} will give an error if you try to link together input
everything else. This is to prevent gaps between symbols due to
alignment constraints.
+@kindex --sort-section name
+@item --sort-section name
+This option will apply @code{SORT_BY_NAME} to all wildcard section
+patterns in the linker script.
+
+@kindex --sort-section alignment
+@item --sort-section alignment
+This option will apply @code{SORT_BY_ALIGNMENT} to all wildcard section
+patterns in the linker script.
+
@kindex --split-by-file
@item --split-by-file [@var{size}]
Similar to @option{--split-by-reloc} but creates a new output section for
Compute and display statistics about the operation of the linker, such
as execution time and memory usage.
+@kindex --sysroot
+@item --sysroot=@var{directory}
+Use @var{directory} as the location of the sysroot, overriding the
+configure-time default. This option is only supported by linkers
+that were configured using @option{--with-sysroot}.
+
@kindex --traditional-format
@cindex traditional format
@item --traditional-format
is, if the @code{SECTIONS} command does not specify a start address for
the section (@pxref{SECTIONS}).
+@kindex --warn-shared-textrel
+@item --warn-shared-textrel
+Warn if the linker adds a DT_TEXTREL to a shared object.
+
@kindex --warn-unresolved-symbols
@item --warn-unresolved-symbols
If the linker is going to report an unresolved symbol (see the option
exported. The symbol names may be delimited by commas or colons.
[This option is specific to the i386 PE targeted port of the linker]
-@kindex --exclude-libs
-@item --exclude-libs @var{lib},@var{lib},...
-Specifies a list of archive libraries from which symbols should not be automatically
-exported. The library names may be delimited by commas or colons. Specifying
-@code{--exclude-libs ALL} excludes symbols in all archive libraries from
-automatic export. Symbols explicitly listed in a .def file are still exported,
-regardless of this option.
-[This option is specific to the i386 PE targeted port of the linker]
-
@kindex --file-alignment
@item --file-alignment
Specify the file alignment. Sections in the file will always begin at
@itemx --subsystem @var{which}:@var{major}.@var{minor}
Specifies the subsystem under which your program will execute. The
legal values for @var{which} are @code{native}, @code{windows},
-@code{console}, and @code{posix}. You may optionally set the
-subsystem version also.
+@code{console}, @code{posix}, and @code{xbox}. You may optionally set
+the subsystem version also. Numeric values are also accepted for
+@var{which}.
[This option is specific to the i386 PE targeted port of the linker]
@end table
new undefined references are created. See the description of @samp{-(}
in @ref{Options,,Command Line Options}.
+@item AS_NEEDED(@var{file}, @var{file}, @dots{})
+@itemx AS_NEEDED(@var{file} @var{file} @dots{})
+@kindex AS_NEEDED(@var{files})
+This construct can appear only inside of the @code{INPUT} or @code{GROUP}
+commands, among other filenames. The files listed will be handled
+as if they appear directly in the @code{INPUT} or @code{GROUP} commands,
+with the exception of ELF shared libraries, that will be added only
+when they are actually needed. This construct essentially enables
+@option{--as-needed} option for all the files listed inside of it
+and restores previous @option{--as-needed} resp. @option{--no-as-needed}
+setting afterwards.
+
@item OUTPUT(@var{filename})
@kindex OUTPUT(@var{filename})
@cindex output file name in linker scripot
@cindex symbol definition, scripts
@cindex variables, defining
You may assign a value to a symbol in a linker script. This will define
-the symbol as a global symbol.
+the symbol and place it into the symbol table with a global scope.
@menu
* Simple Assignments:: Simple Assignments
* PROVIDE:: PROVIDE
+* Source Code Reference:: How to use a linker script defined symbol in source code
@end menu
@node Simple Assignments
defined, and the value will be adjusted accordingly.
The special symbol name @samp{.} indicates the location counter. You
-may only use this within a @code{SECTIONS} command.
+may only use this within a @code{SECTIONS} command. @xref{Location Counter}.
The semicolon after @var{expression} is required.
If the program references @samp{etext} but does not define it, the
linker will use the definition in the linker script.
+@node Source Code Reference
+@subsection Source Code Reference
+
+Accessing a linker script defined variable from source code is not
+intuitive. In particular a linker script symbol is not equivalent to
+a variable declaration in a high level language, it is instead a
+symbol that does not have a value.
+
+Before going further, it is important to note that compilers often
+transform names in the source code into different names when they are
+stored in the symbol table. For example, Fortran compilers commonly
+prepend or append an underscore, and C++ performs extensive @samp{name
+mangling}. Therefore there might be a discrepancy between the name
+of a variable as it is used in source code and the name of the same
+variable as it is defined in a linker script. For example in C a
+linker script variable might be referred to as:
+
+@smallexample
+ extern int foo;
+@end smallexample
+
+But in the linker script it might be defined as:
+
+@smallexample
+ _foo = 1000;
+@end smallexample
+
+In the remaining examples however it is assumed that no name
+transformation has taken place.
+
+When a symbol is declared in a high level language such as C, two
+things happen. The first is that the compiler reserves enough space
+in the program's memory to hold the @emph{value} of the symbol. The
+second is that the compiler creates an entry in the program's symbol
+table which holds the symbol's @emph{address}. ie the symbol table
+contains the address of the block of memory holding the symbol's
+value. So for example the following C declaration, at file scope:
+
+@smallexample
+ int foo = 1000;
+@end smallexample
+
+creates a entry called @samp{foo} in the symbol table. This entry
+holds the address of an @samp{int} sized block of memory where the
+number 1000 is initially stored.
+
+When a program references a symbol the compiler generates code that
+first accesses the symbol table to find the address of the symbol's
+memory block and then code to read the value from that memory block.
+So:
+
+@smallexample
+ foo = 1;
+@end smallexample
+
+looks up the symbol @samp{foo} in the symbol table, gets the address
+associated with this symbol and then writes the value 1 into that
+address. Whereas:
+
+@smallexample
+ int * a = & foo;
+@end smallexample
+
+looks up the symbol @samp{foo} in the symbol table, gets it address
+and then copies this address into the block of memory associated with
+the variable @samp{a}.
+
+Linker scripts symbol declarations, by contrast, create an entry in
+the symbol table but do not assign any memory to them. Thus they are
+an address without a value. So for example the linker script definition:
+
+@smallexample
+ foo = 1000;
+@end smallexample
+
+creates an entry in the symbol table called @samp{foo} which holds
+the address of memory location 1000, but nothing special is stored at
+address 1000. This means that you cannot access the @emph{value} of a
+linker script defined symbol - it has no value - all you can do is
+access the @emph{address} of a linker script defined symbol.
+
+Hence when you are using a linker script defined symbol in source code
+you should always take the address of the symbol, and never attempt to
+use its value. For example suppose you want to copy the contents of a
+section of memory called .ROM into a section called .FLASH and the
+linker script contains these declarations:
+
+@smallexample
+@group
+ start_of_ROM = .ROM;
+ end_of_ROM = .ROM + sizeof (.ROM) - 1;
+ start_of_FLASH = .FLASH;
+@end group
+@end smallexample
+
+Then the C source code to perform the copy would be:
+
+@smallexample
+@group
+ extern char start_of_ROM, end_of_ROM, start_of_FLASH;
+
+ memcpy (& start_of_FLASH, & start_of_ROM, & end_of_ROM - & start_of_ROM);
+@end group
+@end smallexample
+
+Note the use of the @samp{&} operators. These are correct.
+
@node SECTIONS
@section SECTIONS Command
@kindex SECTIONS
.data1 : @{ data.o(.data) @}
@end smallexample
-@cindex SORT
+@cindex SORT_BY_NAME
Normally, the linker will place files and sections matched by wildcards
in the order in which they are seen during the link. You can change
-this by using the @code{SORT} keyword, which appears before a wildcard
-pattern in parentheses (e.g., @code{SORT(.text*)}). When the
-@code{SORT} keyword is used, the linker will sort the files or sections
+this by using the @code{SORT_BY_NAME} keyword, which appears before a wildcard
+pattern in parentheses (e.g., @code{SORT_BY_NAME(.text*)}). When the
+@code{SORT_BY_NAME} keyword is used, the linker will sort the files or sections
into ascending order by name before placing them in the output file.
+@cindex SORT_BY_ALIGNMENT
+@code{SORT_BY_ALIGNMENT} is very similar to @code{SORT_BY_NAME}. The
+difference is @code{SORT_BY_ALIGNMENT} will sort sections into
+ascending order by alignment before placing them in the output file.
+
+@cindex SORT
+@code{SORT} is an alias for @code{SORT_BY_NAME}.
+
+When there are nested section sorting commands in linker script, there
+can be at most 1 level of nesting for section sorting commands.
+
+@enumerate
+@item
+@code{SORT_BY_NAME} (@code{SORT_BY_ALIGNMENT} (wildcard section pattern)).
+It will sort the input sections by name first, then by alignment if 2
+sections have the same name.
+@item
+@code{SORT_BY_ALIGNMENT} (@code{SORT_BY_NAME} (wildcard section pattern)).
+It will sort the input sections by alignment first, then by name if 2
+sections have the same alignment.
+@item
+@code{SORT_BY_NAME} (@code{SORT_BY_NAME} (wildcard section pattern)) is
+treated the same as @code{SORT_BY_NAME} (wildcard section pattern).
+@item
+@code{SORT_BY_ALIGNMENT} (@code{SORT_BY_ALIGNMENT} (wildcard section pattern))
+is treated the same as @code{SORT_BY_ALIGNMENT} (wildcard section pattern).
+@item
+All other nested section sorting commands are invalid.
+@end enumerate
+
+When both command line section sorting option and linker script
+section sorting command are used, section sorting command always
+takes precedence over the command line option.
+
+If the section sorting command in linker script isn't nested, the
+command line option will make the section sorting command to be
+treated as nested sorting command.
+
+@enumerate
+@item
+@code{SORT_BY_NAME} (wildcard section pattern ) with
+@option{--sort-sections alignment} is equivalent to
+@code{SORT_BY_NAME} (@code{SORT_BY_ALIGNMENT} (wildcard section pattern)).
+@item
+@code{SORT_BY_ALIGNMENT} (wildcard section pattern) with
+@option{--sort-section name} is equivalent to
+@code{SORT_BY_ALIGNMENT} (@code{SORT_BY_NAME} (wildcard section pattern)).
+@end enumerate
+
+If the section sorting command in linker script is nested, the
+command line option will be ignored.
+
If you ever get confused about where input sections are going, use the
@samp{-M} linker option to generate a map file. The map file shows
precisely how input sections are mapped to output sections.
it is often useful to mark sections that should not be eliminated.
This is accomplished by surrounding an input section's wildcard entry
with @code{KEEP()}, as in @code{KEEP(*(.init))} or
-@code{KEEP(SORT(*)(.ctors))}.
+@code{KEEP(SORT_BY_NAME(*)(.ctors))}.
@node Input Section Example
@subsubsection Input Section Example
ignored for other object file formats.
The symbol @w{@code{__CTOR_LIST__}} marks the start of the global
-constructors, and the symbol @w{@code{__DTOR_LIST}} marks the end. The
+constructors, and the symbol @w{@code{__CTOR_END__}} marks the end.
+Similarly, @w{@code{__DTOR_LIST__}} and @w{@code{__DTOR_END__}} mark
+the start and end of the global destructors. The
first word in the list is the number of entries, followed by the address
of each constructor or destructor, followed by a zero word. The
compiler must arrange to actually run the code. For these object file
which provides some control over the order in which global constructors
are run, you must sort the constructors at link time to ensure that they
are executed in the correct order. When using the @code{CONSTRUCTORS}
-command, use @samp{SORT(CONSTRUCTORS)} instead. When using the
-@code{.ctors} and @code{.dtors} sections, use @samp{*(SORT(.ctors))} and
-@samp{*(SORT(.dtors))} instead of just @samp{*(.ctors)} and
+command, use @samp{SORT_BY_NAME(CONSTRUCTORS)} instead. When using the
+@code{.ctors} and @code{.dtors} sections, use @samp{*(SORT_BY_NAME(.ctors))} and
+@samp{*(SORT_BY_NAME(.dtors))} instead of just @samp{*(.ctors)} and
@samp{*(.dtors)}.
Normally the compiler and linker will handle these issues automatically,
@kindex ORIGIN =
@kindex o =
@kindex org =
-The @var{origin} is an expression for the start address of the memory
-region. The expression must evaluate to a constant before memory
-allocation is performed, which means that you may not use any section
-relative symbols. The keyword @code{ORIGIN} may be abbreviated to
-@code{org} or @code{o} (but not, for example, @code{ORG}).
+The @var{origin} is an numerical expression for the start address of
+the memory region. The expression must evaluate to a constant and it
+cannot involve any symbols. The keyword @code{ORIGIN} may be
+abbreviated to @code{org} or @code{o} (but not, for example,
+@code{ORG}).
@kindex LENGTH =
@kindex len =
@kindex l =
The @var{len} is an expression for the size in bytes of the memory
region. As with the @var{origin} expression, the expression must
-evaluate to a constant before memory allocation is performed. The
-keyword @code{LENGTH} may be abbreviated to @code{len} or @code{l}.
+be numerical only and must evaluate to a constant. The keyword
+@code{LENGTH} may be abbreviated to @code{len} or @code{l}.
In the following example, we specify that there are two memory regions
available for allocation: one starting at @samp{0} for 256 kilobytes,
output sections directed to a memory region are too large for the
region, the linker will issue an error message.
+It is possible to access the origin and length of a memory in an
+expression via the @code{ORIGIN(@var{memory})} and
+@code{LENGTH(@var{memory})} functions:
+
+@smallexample
+@group
+ _fstack = ORIGIN(ram) + LENGTH(ram) - 4;
+@end group
+@end smallexample
+
@node PHDRS
@section PHDRS Command
@kindex PHDRS
the values from the @samp{.data} input sections and before the end of
the @samp{.data} output section itself.
+@cindex dot outside sections
+Setting symbols to the value of the location counter outside of an
+output section statement can result in unexpected values if the linker
+needs to place orphan sections. For example, given the following:
+
+@smallexample
+SECTIONS
+@{
+ start_of_text = . ;
+ .text: @{ *(.text) @}
+ end_of_text = . ;
+
+ start_of_data = . ;
+ .data: @{ *(.data) @}
+ end_of_data = . ;
+@}
+@end smallexample
+
+If the linker needs to place some input section, e.g. @code{.rodata},
+not mentioned in the script, it might choose to place that section
+between @code{.text} and @code{.data}. You might think the linker
+should place @code{.rodata} on the blank line in the above script, but
+blank lines are of no particular significance to the linker. As well,
+the linker doesn't associate the above symbol names with their
+sections. Instead, it assumes that all assignments or other
+statements belong to the previous output section, except for the
+special case of an assignment to @code{.}. I.e., the linker will
+place the orphan @code{.rodata} section as if the script was written
+as follows:
+
+@smallexample
+SECTIONS
+@{
+ start_of_text = . ;
+ .text: @{ *(.text) @}
+ end_of_text = . ;
+
+ start_of_data = . ;
+ .rodata: @{ *(.rodata) @}
+ .data: @{ *(.data) @}
+ end_of_data = . ;
+@}
+@end smallexample
+
+This may or may not be the script author's intention for the value of
+@code{start_of_data}. One way to influence the orphan section
+placement is to assign the location counter to itself, as the linker
+assumes that an assignment to @code{.} is setting the start address of
+a following output section and thus should be grouped with that
+section. So you could write:
+
+@smallexample
+SECTIONS
+@{
+ start_of_text = . ;
+ .text: @{ *(.text) @}
+ end_of_text = . ;
+
+ . = . ;
+ start_of_data = . ;
+ .data: @{ *(.data) @}
+ end_of_data = . ;
+@}
+@end smallexample
+
+Now, the orphan @code{.rodata} section will be placed between
+@code{end_of_text} and @code{start_of_data}.
+
@need 2000
@node Operators
@subsection Operators
@end group
@end smallexample
+@item LENGTH(@var{memory})
+@kindex LENGTH(@var{memory})
+Return the length of the memory region named @var{memory}.
+
@item LOADADDR(@var{section})
@kindex LOADADDR(@var{section})
@cindex section load address in expression
use the @code{MEMORY} command to define discontinuous memory for the
output file, the two functions are equivalent.
+@item ORIGIN(@var{memory})
+@kindex ORIGIN(@var{memory})
+Return the origin of the memory region named @var{memory}.
+
+@item SEGMENT_START(@var{segment}, @var{default})
+@kindex SEGMENT_START(@var{segment}, @var{default})
+Return the base address of the named @var{segment}. If an explicit
+value has been given for this segment (with a command-line @samp{-T}
+option) that value will be returned; otherwise the value will be
+@var{default}. At present, the @samp{-T} command-line option can only
+be used to set the base address for the ``text'', ``data'', and
+``bss'' sections, but you use @code{SEGMENT_START} with any segment
+name.
+
@item SIZEOF(@var{section})
@kindex SIZEOF(@var{section})
@cindex section size
@samp{R_ARM_GOT_PREL} (arm*-*-linux, arm*-*-*bsd)
@end table
+@cindex FIX_V4BX
+@kindex --fix-v4bx
+The @samp{R_ARM_V4BX} relocation (defined by the ARM AAELF
+specification) enables objects compiled for the ARMv4 architecture to be
+interworking-safe when linked with other objects compiled for ARMv4t, but
+also allows pure ARMv4 binaries to be built from the same ARMv4 objects.
+
+In the latter case, the switch @option{--fix-v4bx} must be passed to the
+linker, which causes v4t @code{BX rM} instructions to be rewritten as
+@code{MOV PC,rM}, since v4 processors do not have a @code{BX} instruction.
+
+In the former case, the switch should not be used, and @samp{R_ARM_V4BX}
+relocations are ignored.
+
@ifclear GENERIC
@lowersections
@end ifclear
group of files followed by the @code{.text} sections of that group of
files. Then, the @code{.literal} sections from the rest of the files
and the @code{.text} sections from the rest of the files would follow.
-The non-interleaved order can still be specified as:
-
-@smallexample
-SECTIONS
-@{
- .text : @{
- *(.literal) *(.text)
- @}
-@}
-@end smallexample
-@cindex @code{--relax} on Xtensa
+@cindex @option{--relax} on Xtensa
@cindex relaxing on Xtensa
+Relaxation is enabled by default for the Xtensa version of @command{ld} and
+provides two important link-time optimizations. The first optimization
+is to combine identical literal values to reduce code size. A redundant
+literal will be removed and all the @code{L32R} instructions that use it
+will be changed to reference an identical literal, as long as the
+location of the replacement literal is within the offset range of all
+the @code{L32R} instructions. The second optimization is to remove
+unnecessary overhead from assembler-generated ``longcall'' sequences of
+@code{L32R}/@code{CALLX@var{n}} when the target functions are within
+range of direct @code{CALL@var{n}} instructions.
+
+For each of these cases where an indirect call sequence can be optimized
+to a direct call, the linker will change the @code{CALLX@var{n}}
+instruction to a @code{CALL@var{n}} instruction, remove the @code{L32R}
+instruction, and remove the literal referenced by the @code{L32R}
+instruction if it is not used for anything else. Removing the
+@code{L32R} instruction always reduces code size but can potentially
+hurt performance by changing the alignment of subsequent branch targets.
+By default, the linker will always preserve alignments, either by
+switching some instructions between 24-bit encodings and the equivalent
+density instructions or by inserting a no-op in place of the @code{L32R}
+instruction that was removed. If code size is more important than
+performance, the @option{--size-opt} option can be used to prevent the
+linker from widening density instructions or inserting no-ops, except in
+a few cases where no-ops are required for correctness.
+
+The following Xtensa-specific command-line options can be used to
+control the linker:
+
+@cindex Xtensa options
+@table @option
@kindex --no-relax
-The Xtensa version of @command{ld} enables the @option{--relax} option by
-default to attempt to reduce space in the output image by combining
-literals with identical values. It also provides the
-@option{--no-relax} option to disable this optimization. When enabled,
-the relaxation algorithm ensures that a literal will only be merged with
-another literal when the new merged literal location is within the
-offset range of all of its uses.
-
-The relaxation mechanism will also attempt to optimize
-assembler-generated ``longcall'' sequences of
-@code{L32R}/@code{CALLX@var{n}} when the target is known to fit into a
-@code{CALL@var{n}} instruction encoding. The current optimization
-converts the sequence into @code{NOP}/@code{CALL@var{n}} and removes the
-literal referenced by the @code{L32R} instruction.
+@item --no-relax
+Since the Xtensa version of @code{ld} enables the @option{--relax} option
+by default, the @option{--no-relax} option is provided to disable
+relaxation.
+
+@item --size-opt
+When optimizing indirect calls to direct calls, optimize for code size
+more than performance. With this option, the linker will not insert
+no-ops or widen density instructions to preserve branch target
+alignment. There may still be some cases where no-ops are required to
+preserve the correctness of the code.
+@end table
@ifclear GENERIC
@lowersections
projects / deliverable / binutils-gdb.git / blobdiff