@samp{0} for base 8). @xref{Entry Point}, for a discussion of defaults
and other ways of specifying the entry point.
+@kindex --exclude-libs
+@item --exclude-libs @var{lib},@var{lib},...
+Specifies a list of archive libraries from which symbols should not be automatically
+exported. The library names may be delimited by commas or colons. Specifying
+@code{--exclude-libs ALL} excludes symbols in all archive libraries from
+automatic export. This option is available only for the i386 PE targeted
+port of the linker and for ELF targeted ports. For i386 PE, symbols
+explicitly listed in a .def file are still exported, regardless of this
+option. For ELF targeted ports, symbols affected by this option will
+be treated as hidden.
+
@cindex dynamic symbol table
@kindex -E
@kindex --export-dynamic
it. This option disallows symbols with undefined version and a fatal error
will be issued instead.
+@kindex --default-symver
+@item --default-symver
+Create and use a default symbol version (the soname) for unversioned
+exported symbols.
+
+@kindex --default-imported-symver
+@item --default-imported-symver
+Create and use a default symbol version (the soname) for unversioned
+imported symbols.
+
@kindex --no-warn-mismatch
@item --no-warn-mismatch
Normally @command{ld} will give an error if you try to link together input
is, if the @code{SECTIONS} command does not specify a start address for
the section (@pxref{SECTIONS}).
+@kindex --warn-shared-textrel
+@item --warn-shared-textrel
+Warn if the linker adds a DT_TEXTREL to a shared object.
+
@kindex --warn-unresolved-symbols
@item --warn-unresolved-symbols
If the linker is going to report an unresolved symbol (see the option
exported. The symbol names may be delimited by commas or colons.
[This option is specific to the i386 PE targeted port of the linker]
-@kindex --exclude-libs
-@item --exclude-libs @var{lib},@var{lib},...
-Specifies a list of archive libraries from which symbols should not be automatically
-exported. The library names may be delimited by commas or colons. Specifying
-@code{--exclude-libs ALL} excludes symbols in all archive libraries from
-automatic export. Symbols explicitly listed in a .def file are still exported,
-regardless of this option.
-[This option is specific to the i386 PE targeted port of the linker]
-
@kindex --file-alignment
@item --file-alignment
Specify the file alignment. Sections in the file will always begin at
@kindex ORIGIN =
@kindex o =
@kindex org =
-The @var{origin} is an expression for the start address of the memory
-region. The expression must evaluate to a constant before memory
-allocation is performed, which means that you may not use any section
-relative symbols. The keyword @code{ORIGIN} may be abbreviated to
-@code{org} or @code{o} (but not, for example, @code{ORG}).
+The @var{origin} is an numerical expression for the start address of
+the memory region. The expression must evaluate to a constant and it
+cannot involve any symbols. The keyword @code{ORIGIN} may be
+abbreviated to @code{org} or @code{o} (but not, for example,
+@code{ORG}).
@kindex LENGTH =
@kindex len =
@kindex l =
The @var{len} is an expression for the size in bytes of the memory
region. As with the @var{origin} expression, the expression must
-evaluate to a constant before memory allocation is performed. The
-keyword @code{LENGTH} may be abbreviated to @code{len} or @code{l}.
+be numerical only and must evaluate to a constant. The keyword
+@code{LENGTH} may be abbreviated to @code{len} or @code{l}.
In the following example, we specify that there are two memory regions
available for allocation: one starting at @samp{0} for 256 kilobytes,
output sections directed to a memory region are too large for the
region, the linker will issue an error message.
+It is possible to access the origin and length of a memory in an
+expression via the @code{ORIGIN(@var{memory})} and
+@code{LENGTH(@var{memory})} functions:
+
+@smallexample
+@group
+ _fstack = ORIGIN(ram) + LENGTH(ram) - 4;
+@end group
+@end smallexample
+
@node PHDRS
@section PHDRS Command
@kindex PHDRS
@end group
@end smallexample
+@item LENGTH(@var{memory})
+@kindex LENGTH(@var{memory})
+Return the length of the memory region named @var{memory}.
+
@item LOADADDR(@var{section})
@kindex LOADADDR(@var{section})
@cindex section load address in expression
use the @code{MEMORY} command to define discontinuous memory for the
output file, the two functions are equivalent.
+@item ORIGIN(@var{memory})
+@kindex ORIGIN(@var{memory})
+Return the origin of the memory region named @var{memory}.
+
+@item SEGMENT_START(@var{segment}, @var{default})
+@kindex SEGMENT_START(@var{segment}, @var{default})
+Return the base address of the named @var{segment}. If an explicit
+value has been given for this segment (with a command-line @samp{-T}
+option) that value will be returned; otherwise the value will be
+@var{default}. At present, the @samp{-T} command-line option can only
+be used to set the base address for the ``text'', ``data'', and
+``bss'' sections, but you use @code{SEGMENT_START} with any segment
+name.
+
@item SIZEOF(@var{section})
@kindex SIZEOF(@var{section})
@cindex section size
group of files followed by the @code{.text} sections of that group of
files. Then, the @code{.literal} sections from the rest of the files
and the @code{.text} sections from the rest of the files would follow.
-The non-interleaved order can still be specified as:
-@smallexample
-SECTIONS
-@{
- .text : @{
- *(.literal) *(.text)
- @}
-@}
-@end smallexample
-
-@cindex @code{--relax} on Xtensa
+@cindex @option{--relax} on Xtensa
@cindex relaxing on Xtensa
+Relaxation is enabled by default for the Xtensa version of @command{ld} and
+provides two important link-time optimizations. The first optimization
+is to combine identical literal values to reduce code size. A redundant
+literal will be removed and all the @code{L32R} instructions that use it
+will be changed to reference an identical literal, as long as the
+location of the replacement literal is within the offset range of all
+the @code{L32R} instructions. The second optimization is to remove
+unnecessary overhead from assembler-generated ``longcall'' sequences of
+@code{L32R}/@code{CALLX@var{n}} when the target functions are within
+range of direct @code{CALL@var{n}} instructions.
+
+For each of these cases where an indirect call sequence can be optimized
+to a direct call, the linker will change the @code{CALLX@var{n}}
+instruction to a @code{CALL@var{n}} instruction, remove the @code{L32R}
+instruction, and remove the literal referenced by the @code{L32R}
+instruction if it is not used for anything else. Removing the
+@code{L32R} instruction always reduces code size but can potentially
+hurt performance by changing the alignment of subsequent branch targets.
+By default, the linker will always preserve alignments, either by
+switching some instructions between 24-bit encodings and the equivalent
+density instructions or by inserting a no-op in place of the @code{L32R}
+instruction that was removed. If code size is more important than
+performance, the @option{--size-opt} option can be used to prevent the
+linker from widening density instructions or inserting no-ops, except in
+a few cases where no-ops are required for correctness.
+
+The following Xtensa-specific command-line options can be used to
+control the linker:
+
+@cindex Xtensa options
+@table @option
@kindex --no-relax
-The Xtensa version of @command{ld} enables the @option{--relax} option by
-default to attempt to reduce space in the output image by combining
-literals with identical values. It also provides the
-@option{--no-relax} option to disable this optimization. When enabled,
-the relaxation algorithm ensures that a literal will only be merged with
-another literal when the new merged literal location is within the
-offset range of all of its uses.
-
-The relaxation mechanism will also attempt to optimize
-assembler-generated ``longcall'' sequences of
-@code{L32R}/@code{CALLX@var{n}} when the target is known to fit into a
-@code{CALL@var{n}} instruction encoding. The current optimization
-converts the sequence into @code{NOP}/@code{CALL@var{n}} and removes the
-literal referenced by the @code{L32R} instruction.
+@item --no-relax
+Since the Xtensa version of @code{ld} enables the @option{--relax} option
+by default, the @option{--no-relax} option is provided to disable
+relaxation.
+
+@item --size-opt
+When optimizing indirect calls to direct calls, optimize for code size
+more than performance. With this option, the linker will not insert
+no-ops or widen density instructions to preserve branch target
+alignment. There may still be some cases where no-ops are required to
+preserve the correctness of the code.
+@end table
@ifclear GENERIC
@lowersections
projects / deliverable / binutils-gdb.git / blobdiff