insert_undefined (ptr->name);
}
+/* Structure used to build the list of symbols that the user has required
+ be defined. */
+
+struct require_defined_symbol
+{
+ const char *name;
+ struct require_defined_symbol *next;
+};
+
+/* The list of symbols that the user has required be defined. */
+
+static struct require_defined_symbol *require_defined_symbol_list;
+
+/* Add a new symbol NAME to the list of symbols that are required to be
+ defined. */
+
+void
+ldlang_add_require_defined (const char * const name)
+{
+ struct require_defined_symbol *ptr;
+
+ ldlang_add_undef (name, TRUE);
+ ptr = (struct require_defined_symbol *) stat_alloc (sizeof (*ptr));
+ ptr->next = require_defined_symbol_list;
+ ptr->name = strdup (name);
+ require_defined_symbol_list = ptr;
+}
+
+/* Check that all symbols the user required to be defined, are defined,
+ raise an error if we find a symbol that is not defined. */
+
+static void
+ldlang_check_require_defined_symbols (void)
+{
+ struct require_defined_symbol *ptr;
+
+ for (ptr = require_defined_symbol_list; ptr != NULL; ptr = ptr->next)
+ {
+ struct bfd_link_hash_entry *h;
+
+ h = bfd_link_hash_lookup (link_info.hash, ptr->name,
+ FALSE, FALSE, TRUE);
+ if (h == NULL
+ || (h->type != bfd_link_hash_defined
+ && h->type != bfd_link_hash_defweak))
+ einfo(_("%P%X: required symbol `%s' not defined\n"), ptr->name);
+ }
+}
+
/* Check for all readonly or some readwrite sections. */
static void
if (expld.dataseg.phase == exp_dataseg_end_seen
&& link_info.relro && expld.dataseg.relro_end)
{
- /* If DATA_SEGMENT_ALIGN DATA_SEGMENT_RELRO_END pair was seen, try
- to put expld.dataseg.relro_end on a (common) page boundary. */
- bfd_vma min_base, relro_end, maxpage;
+ bfd_vma initial_base, relro_end, desired_end;
+ asection *sec;
- expld.dataseg.phase = exp_dataseg_relro_adjust;
- maxpage = expld.dataseg.maxpagesize;
- /* MIN_BASE is the absolute minimum address we are allowed to start the
- read-write segment (byte before will be mapped read-only). */
- min_base = (expld.dataseg.min_base + maxpage - 1) & ~(maxpage - 1);
- expld.dataseg.base += (-expld.dataseg.relro_end
- & (expld.dataseg.pagesize - 1));
/* Compute the expected PT_GNU_RELRO segment end. */
relro_end = ((expld.dataseg.relro_end + expld.dataseg.pagesize - 1)
& ~(expld.dataseg.pagesize - 1));
- if (min_base + maxpage < expld.dataseg.base)
- {
- expld.dataseg.base -= maxpage;
- relro_end -= maxpage;
- }
+
+ /* Adjust by the offset arg of DATA_SEGMENT_RELRO_END. */
+ desired_end = relro_end - expld.dataseg.relro_offset;
+
+ /* For sections in the relro segment.. */
+ for (sec = link_info.output_bfd->section_last; sec; sec = sec->prev)
+ if (!IGNORE_SECTION (sec)
+ && sec->vma >= expld.dataseg.base
+ && sec->vma < expld.dataseg.relro_end - expld.dataseg.relro_offset)
+ {
+ /* Where do we want to put this section so that it ends as
+ desired? */
+ bfd_vma start = sec->vma;
+ bfd_vma end = start + sec->size;
+ bfd_vma bump = desired_end - end;
+ /* We'd like to increase START by BUMP, but we must heed
+ alignment so the increase might be less than optimum. */
+ start += bump & ~(((bfd_vma) 1 << sec->alignment_power) - 1);
+ /* This is now the desired end for the previous section. */
+ desired_end = start;
+ }
+
+ expld.dataseg.phase = exp_dataseg_relro_adjust;
+ ASSERT (desired_end >= expld.dataseg.base);
+ initial_base = expld.dataseg.base;
+ expld.dataseg.base = desired_end;
lang_reset_memory_regions ();
one_lang_size_sections_pass (relax, check_regions);
+
if (expld.dataseg.relro_end > relro_end)
{
- /* The alignment of sections between DATA_SEGMENT_ALIGN
- and DATA_SEGMENT_RELRO_END can cause excessive padding to
- be inserted at DATA_SEGMENT_RELRO_END. Try to start a
- bit lower so that the section alignments will fit in. */
- asection *sec;
- unsigned int max_alignment_power = 0;
-
- /* Find maximum alignment power of sections between
- DATA_SEGMENT_ALIGN and DATA_SEGMENT_RELRO_END. */
- for (sec = link_info.output_bfd->sections; sec; sec = sec->next)
- if (sec->vma >= expld.dataseg.base
- && sec->vma < expld.dataseg.relro_end
- && sec->alignment_power > max_alignment_power)
- max_alignment_power = sec->alignment_power;
-
- if (((bfd_vma) 1 << max_alignment_power) < expld.dataseg.pagesize)
- {
- /* Aligning the adjusted base guarantees the padding
- between sections won't change. This is better than
- simply subtracting 1 << max_alignment_power which is
- what we used to do here. */
- expld.dataseg.base &= ~((1 << max_alignment_power) - 1);
- lang_reset_memory_regions ();
- one_lang_size_sections_pass (relax, check_regions);
- }
+ /* Assignments to dot, or to output section address in a
+ user script have increased padding over the original.
+ Revert. */
+ expld.dataseg.base = initial_base;
+ lang_reset_memory_regions ();
+ one_lang_size_sections_pass (relax, check_regions);
}
+
link_info.relro_start = expld.dataseg.base;
link_info.relro_end = expld.dataseg.relro_end;
}
link_info.gc_sym_list = &entry_symbol;
if (entry_symbol.name == NULL)
link_info.gc_sym_list = ldlang_undef_chain_list_head;
+ if (link_info.init_function != NULL)
+ {
+ struct bfd_sym_chain *sym
+ = (struct bfd_sym_chain *) stat_alloc (sizeof (*sym));
+ sym->next = link_info.gc_sym_list;
+ sym->name = link_info.init_function;
+ link_info.gc_sym_list = sym;
+ }
+ if (link_info.fini_function != NULL)
+ {
+ struct bfd_sym_chain *sym
+ = (struct bfd_sym_chain *) stat_alloc (sizeof (*sym));
+ sym->next = link_info.gc_sym_list;
+ sym->name = link_info.fini_function;
+ link_info.gc_sym_list = sym;
+ }
ldemul_after_open ();
if (config.map_file != NULL)
if (command_line.check_section_addresses)
lang_check_section_addresses ();
+ /* Check any required symbols are known. */
+ ldlang_check_require_defined_symbols ();
+
lang_end ();
}
p = q;
}
}
+
+/* Pretty print memory amount. */
+
+static void
+lang_print_memory_size (bfd_vma sz)
+{
+ if ((sz & 0x3fffffff) == 0)
+ printf ("%10" BFD_VMA_FMT "u GB", sz >> 30);
+ else if ((sz & 0xfffff) == 0)
+ printf ("%10" BFD_VMA_FMT "u MB", sz >> 20);
+ else if ((sz & 0x3ff) == 0)
+ printf ("%10" BFD_VMA_FMT "u KB", sz >> 10);
+ else
+ printf (" %10" BFD_VMA_FMT "u B", sz);
+}
+
+/* Implement --print-memory-usage: disply per region memory usage. */
+
+void
+lang_print_memory_usage (void)
+{
+ lang_memory_region_type *r;
+
+ printf ("Memory region Used Size Region Size %%age Used\n");
+ for (r = lang_memory_region_list; r->next != NULL; r = r->next)
+ {
+ bfd_vma used_length = r->current - r->origin;
+ double percent;
+
+ printf ("%16s: ",r->name_list.name);
+ lang_print_memory_size (used_length);
+ lang_print_memory_size ((bfd_vma) r->length);
+
+ percent = used_length * 100.0 / r->length;
+
+ printf (" %6.2f%%\n", percent);
+ }
+}
projects / deliverable / binutils-gdb.git / blobdiff