#
# Unusual variables checked by this code:
# NOP - four byte opcode for no-op (defaults to 0)
+# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
+# empty.
# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
# INITIAL_READONLY_SECTIONS - at start of text segment
# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
# combination of .init sections.
# FINI_START, FINI_END - statements just before and just after
# combination of .fini sections.
+# STACK_ADDR - start of a .stack section.
+# OTHER_END_SYMBOLS - symbols to place right at the end of the script.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
# .sbss .gnu.linkonce.sb.foo
# .sdata2 .gnu.linkonce.s2.foo
# .sbss2 .gnu.linkonce.sb2.foo
+# .debug_info .gnu.linkonce.wi.foo
#
# Each of these can also have corresponding .rel.* and .rela.* sections.
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
-PLT=".plt ${RELOCATING-0} : { *(.plt) }"
-DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
-RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }"
-SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }"
-SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }"
-CTOR=".ctors ${CONSTRUCTING-0} :
+DATA_SEGMENT_ALIGN="ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))"
+if [ -n "${COMMONPAGESIZE}" ]; then
+ DATA_SEGMENT_ALIGN="DATA_SEGMENT_ALIGN(${MAXPAGESIZE}, ${COMMONPAGESIZE})"
+fi
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+if test -z "${NO_SMALL_DATA}"; then
+ SBSS=".sbss ${RELOCATING-0} :
+ {
+ ${RELOCATING+PROVIDE (__sbss_start = .);}
+ ${RELOCATING+PROVIDE (___sbss_start = .);}
+ *(.dynsbss)
+ *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
+ *(.scommon)
+ ${RELOCATING+PROVIDE (__sbss_end = .);}
+ ${RELOCATING+PROVIDE (___sbss_end = .);}
+ }"
+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+ SDATA="/* We want the small data sections together, so single-instruction offsets
+ can access them all, and initialized data all before uninitialized, so
+ we can shorten the on-disk segment size. */
+ .sdata ${RELOCATING-0} :
+ {
+ ${RELOCATING+${SDATA_START_SYMBOLS}}
+ *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
+ }"
+ SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+fi
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
}"
-
-DTOR=" .dtors ${CONSTRUCTING-0} :
+DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
}"
+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
+ {
+ ${RELOCATING+_stack = .;}
+ *(.stack)
+ }"
# if this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
${CREATE_SHLIB-${INTERP}}
${INITIAL_READONLY_SECTIONS}
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash ${RELOCATING-0} : { *(.hash) }
- .dynsym ${RELOCATING-0} : { *(.dynsym) }
- .dynstr ${RELOCATING-0} : { *(.dynstr) }
- .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
- .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
- .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
- .rel.init ${RELOCATING-0} : { *(.rel.init) }
- .rela.init ${RELOCATING-0} : { *(.rela.init) }
- .rel.text ${RELOCATING-0} :
- {
- *(.rel.text)
- ${RELOCATING+*(.rel.text.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
- }
- .rela.text ${RELOCATING-0} :
- {
- *(.rela.text)
- ${RELOCATING+*(.rela.text.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
- }
- .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
- .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
- .rel.rodata ${RELOCATING-0} :
- {
- *(.rel.rodata)
- ${RELOCATING+*(.rel.rodata.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
- }
- .rela.rodata ${RELOCATING-0} :
- {
- *(.rela.rodata)
- ${RELOCATING+*(.rela.rodata.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
- }
+EOF
+if [ "x$COMBRELOC" = x ]; then
+ COMBRELOCCAT=cat
+else
+ COMBRELOCCAT="cat > $COMBRELOC"
+fi
+eval $COMBRELOCCAT <<EOF
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data ${RELOCATING-0} :
- {
- *(.rel.data)
- ${RELOCATING+*(.rel.data.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
- }
- .rela.data ${RELOCATING-0} :
- {
- *(.rela.data)
- ${RELOCATING+*(.rela.data.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
- }
- .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
- .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
- .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
- .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
- .rel.got ${RELOCATING-0} : { *(.rel.got) }
- .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
${OTHER_GOT_RELOC_SECTIONS}
- .rel.sdata ${RELOCATING-0} :
- {
- *(.rel.sdata)
- ${RELOCATING+*(.rel.sdata.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
- }
- .rela.sdata ${RELOCATING-0} :
- {
- *(.rela.sdata)
- ${RELOCATING+*(.rela.sdata.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
- }
- .rel.sbss ${RELOCATING-0} :
- {
- *(.rel.sbss)
- ${RELOCATING+*(.rel.sbss.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
- }
- .rela.sbss ${RELOCATING-0} :
+ ${REL_SDATA}
+ ${REL_SBSS}
+ ${REL_SDATA2}
+ ${REL_SBSS2}
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+EOF
+if [ -n "$COMBRELOC" ]; then
+cat <<EOF
+ .rel.dyn ${RELOCATING-0} :
{
- *(.rela.sbss)
- ${RELOCATING+*(.rela.sbss.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
- }
- .rel.sdata2 ${RELOCATING-0} :
- {
- *(.rel.sdata2)
- ${RELOCATING+*(.rel.sdata2.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.s2.*)}
+EOF
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
+cat <<EOF
}
- .rela.sdata2 ${RELOCATING-0} :
+ .rela.dyn ${RELOCATING-0} :
{
- *(.rela.sdata2)
- ${RELOCATING+*(.rela.sdata2.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.s2.*)}
- }
- .rel.sbss2 ${RELOCATING-0} :
- {
- *(.rel.sbss2)
- ${RELOCATING+*(.rel.sbss2.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.sb2.*)}
- }
- .rela.sbss2 ${RELOCATING-0} :
- {
- *(.rela.sbss2)
- ${RELOCATING+*(.rela.sbss2.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.sb2.*)}
- }
- .rel.bss ${RELOCATING-0} :
- {
- *(.rel.bss)
- ${RELOCATING+*(.rel.bss.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
- }
- .rela.bss ${RELOCATING-0} :
- {
- *(.rela.bss)
- ${RELOCATING+*(.rela.bss.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
+EOF
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
+cat <<EOF
}
- .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
- .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
+EOF
+fi
+cat <<EOF
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
- .init ${RELOCATING-0} :
+ .init ${RELOCATING-0} :
{
${RELOCATING+${INIT_START}}
KEEP (*(.init))
${RELOCATING+${INIT_END}}
} =${NOP-0}
+ /* Ensure the __preinit_array_start label is properly aligned. We
+ could instead move the label definition inside the section, but
+ the linker would then create the section even if it turns out to
+ be empty, which isn't pretty. */
+ ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_start = .);}}
+ .preinit_array ${RELOCATING-0} : { *(.preinit_array) }
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_end = .);}}
+
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_start = .);}}
+ .init_array ${RELOCATING-0} : { *(.init_array) }
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_end = .);}}
+
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_start = .);}}
+ .fini_array ${RELOCATING-0} : { *(.fini_array) }
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_end = .);}}
+
${DATA_PLT-${BSS_PLT-${PLT}}}
- .text ${RELOCATING-0} :
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
- *(.text)
- ${RELOCATING+*(.text.*)}
- *(.stub)
+ *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
- ${RELOCATING+*(.gnu.linkonce.t.*)}
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} =${NOP-0}
- .fini ${RELOCATING-0} :
+ .fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
KEEP (*(.fini))
${RELOCATING+PROVIDE (_etext = .);}
${RELOCATING+PROVIDE (etext = .);}
${WRITABLE_RODATA-${RODATA}}
- .rodata1 ${RELOCATING-0} : { *(.rodata1) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
${CREATE_SHLIB-${SDATA2}}
${CREATE_SHLIB-${SBSS2}}
- ${RELOCATING+${OTHER_READONLY_SECTIONS}}
+ ${OTHER_READONLY_SECTIONS}
+ .eh_frame_hdr : { *(.eh_frame_hdr) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
- ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
- ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
+ ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
+ ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
- .data ${RELOCATING-0} :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
- *(.data)
- ${RELOCATING+*(.data.*)}
- ${RELOCATING+*(.gnu.linkonce.d.*)}
+ *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
- .data1 ${RELOCATING-0} : { *(.data1) }
- .eh_frame : { KEEP (*(.eh_frame)) }
- .gcc_except_table : { *(.gcc_except_table) }
+ .data1 ${RELOCATING-0} : { *(.data1) }
+ .eh_frame ${RELOCATING-0} : { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : { *(.gcc_except_table) }
${WRITABLE_RODATA+${RODATA}}
- ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
+ ${OTHER_READWRITE_SECTIONS}
${TEXT_DYNAMIC-${DYNAMIC}}
${RELOCATING+${CTOR}}
${RELOCATING+${DTOR}}
- .jcr : { KEEP (*(.jcr)) }
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
${DATA_PLT+${PLT}}
${RELOCATING+${OTHER_GOT_SYMBOLS}}
- .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
- ${RELOCATING+${OTHER_GOT_SECTIONS}}
+ .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
+ ${OTHER_GOT_SECTIONS}
${CREATE_SHLIB+${SDATA2}}
${CREATE_SHLIB+${SBSS2}}
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata ${RELOCATING-0} :
- {
- ${RELOCATING+${SDATA_START_SYMBOLS}}
- *(.sdata)
- ${RELOCATING+*(.sdata.*)}
- ${RELOCATING+*(.gnu.linkonce.s.*)}
- }
- ${RELOCATING+${OTHER_SDATA_SECTIONS}}
+ ${SDATA}
+ ${OTHER_SDATA_SECTIONS}
${RELOCATING+_edata = .;}
${RELOCATING+PROVIDE (edata = .);}
${RELOCATING+__bss_start = .;}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
- .sbss ${RELOCATING-0} :
- {
- ${RELOCATING+PROVIDE (__sbss_start = .);}
- ${RELOCATING+PROVIDE (___sbss_start = .);}
- *(.dynsbss)
- *(.sbss)
- ${RELOCATING+*(.sbss.*)}
- ${RELOCATING+*(.gnu.linkonce.sb.*)}
- *(.scommon)
- ${RELOCATING+PROVIDE (__sbss_end = .);}
- ${RELOCATING+PROVIDE (___sbss_end = .);}
- }
+ ${SBSS}
${BSS_PLT+${PLT}}
- .bss ${RELOCATING-0} :
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
- *(.bss)
- ${RELOCATING+*(.bss.*)}
- ${RELOCATING+*(.gnu.linkonce.b.*)}
+ *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
${RELOCATING+. = ALIGN(${ALIGNMENT});}
}
- ${RELOCATING+${OTHER_BSS_SECTIONS}}
+ ${OTHER_BSS_SECTIONS}
${RELOCATING+. = ALIGN(${ALIGNMENT});}
${RELOCATING+_end = .;}
${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
${RELOCATING+PROVIDE (end = .);}
+ ${COMMONPAGESIZE+${RELOCATING+. = DATA_SEGMENT_END (.);}}
/* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
+ .comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
- .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
+ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
- ${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
-
- /* These must appear regardless of ${RELOCATING}. */
+ ${STACK_ADDR+${STACK}}
${OTHER_SECTIONS}
+ ${RELOCATING+${OTHER_END_SYMBOLS}}
}
EOF
projects / deliverable / binutils-gdb.git / blobdiff