+# Copyright (C) 2014-2020 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.
#
# Unusual variables checked by this code:
# NOP - four byte opcode for no-op (defaults to 0)
# DATA_PLT - .plt should be in data segment, not text segment.
# BSS_PLT - .plt should be in bss segment
# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
-# EMBEDDED - whether this is for an embedded system.
+# EMBEDDED - whether this is for an embedded system.
# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
# start address of shared library.
# INPUT_FILES - INPUT command of files to always include
# WRITABLE_RODATA - if set, the .rodata section should be writable
# INIT_START, INIT_END - statements just before and just after
-# combination of .init sections.
+# combination of .init sections.
# FINI_START, FINI_END - statements just before and just after
-# combination of .fini sections.
+# combination of .fini sections.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
PLT=".plt ${RELOCATING-0} : { *(.plt) }"
DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }"
SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }"
SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }"
-CTOR=".ctors ${CONSTRUCTING-0} :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
}"
-# if this is for an embedded system, don't add SIZEOF_HEADERS.
+# If this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
else
fi
cat <<EOF
+/* Copyright (C) 2014-2020 Free Software Foundation, Inc.
+
+ Copying and distribution of this script, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. */
+
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
"${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
-ENTRY(${ENTRY})
+${RELOCATING+ENTRY(${ENTRY})}
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+/* Do we need any of these for elf?
${RELOCATING+*(.rela.gnu.linkonce.s.*)}
}
.rel.sbss ${RELOCATING-0} :
- {
+ {
*(.rel.sbss)
${RELOCATING+*(.rel.sbss.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
${RELOCATING+*(.rela.sbss.*)}
${RELOCATING+*(.rela.gnu.linkonce.sb.*)}
}
- .rel.sdata2 ${RELOCATING-0} :
- {
+ .rel.sdata2 ${RELOCATING-0} :
+ {
*(.rel.sdata2)
${RELOCATING+*(.rel.sdata2.*)}
${RELOCATING+*(.rel.gnu.linkonce.s2.*)}
}
- .rela.sdata2 ${RELOCATING-0} :
+ .rela.sdata2 ${RELOCATING-0} :
{
*(.rela.sdata2)
${RELOCATING+*(.rela.sdata2.*)}
${RELOCATING+*(.rela.gnu.linkonce.s2.*)}
}
- .rel.sbss2 ${RELOCATING-0} :
- {
- *(.rel.sbss2)
+ .rel.sbss2 ${RELOCATING-0} :
+ {
+ *(.rel.sbss2)
${RELOCATING+*(.rel.sbss2.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb2.*)}
}
- .rela.sbss2 ${RELOCATING-0} :
- {
- *(.rela.sbss2)
+ .rela.sbss2 ${RELOCATING-0} :
+ {
+ *(.rela.sbss2)
${RELOCATING+*(.rela.sbss2.*)}
${RELOCATING+*(.rela.gnu.linkonce.sb2.*)}
}
- .rel.bss ${RELOCATING-0} :
- {
+ .rel.bss ${RELOCATING-0} :
+ {
*(.rel.bss)
${RELOCATING+*(.rel.bss.*)}
${RELOCATING+*(.rel.gnu.linkonce.b.*)}
}
- .rela.bss ${RELOCATING-0} :
- {
+ .rela.bss ${RELOCATING-0} :
+ {
*(.rela.bss)
${RELOCATING+*(.rela.bss.*)}
${RELOCATING+*(.rela.gnu.linkonce.b.*)}
.rel.dyn :
{
EOF
-sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
cat <<EOF
}
.rela.dyn :
{
EOF
-sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
cat <<EOF
}
EOF
.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
- .init ${RELOCATING-0} :
- {
+ .init ${RELOCATING-0} :
+ {
${RELOCATING+${INIT_START}}
- KEEP (*(.init))
+ KEEP (*(SORT_NONE(.init)))
${RELOCATING+${INIT_END}}
} =${NOP-0}
*(.text)
${RELOCATING+*(.text.*)}
*(.stub)
- /* .gnu.warning sections are handled specially by elf32.em. */
+ /* .gnu.warning sections are handled specially by elf.em. */
*(.gnu.warning)
${RELOCATING+*(.gnu.linkonce.t.*)}
${RELOCATING+${OTHER_TEXT_SECTIONS}}
.fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
- KEEP (*(.fini))
+ KEEP (*(SORT_NONE(.fini)))
${RELOCATING+${FINI_END}}
} =${NOP-0}
${RELOCATING+PROVIDE (__etext = .);}
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
.data1 ${RELOCATING-0} : { *(.data1) }
- .eh_frame ${RELOCATING-0} :
- {
+ .eh_frame ${RELOCATING-0} :
+ {
${RELOCATING+PROVIDE (__eh_frame_begin = .);}
- *(.eh_frame)
- LONG (0);
+ *(.eh_frame)
+ ${RELOCATING+LONG (0);}
${RELOCATING+PROVIDE (__eh_frame_end = .);}
- } ${RELOCATING+}
+ }
.gcc_except_table : { *(.gcc_except_table) }
${INITIAL_READONLY_SECTIONS}
.hash ${RELOCATING-0} : { *(.hash) }
.jcr : { KEEP (*(.jcr)) }
${DATA_PLT+${PLT}}
${RELOCATING+${OTHER_GOT_SYMBOLS}}
- .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
+ .got ${RELOCATING-0} : {${RELOCATING+ *(.got.plt)} *(.got) }
${RELOCATING+${OTHER_GOT_SECTIONS}}
${CREATE_SHLIB+${SDATA2}}
${CREATE_SHLIB+${SBSS2}}
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata ${RELOCATING-0} :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
- *(.sdata)
+ *(.sdata)
${RELOCATING+*(.sdata.*)}
${RELOCATING+*(.gnu.linkonce.s.*)}
}
{
${RELOCATING+PROVIDE (__sbss_start = .);}
${RELOCATING+PROVIDE (___sbss_start = .);}
- *(.dynsbss)
+ ${RELOCATING+*(.dynsbss)}
*(.sbss)
${RELOCATING+*(.sbss.*)}
${RELOCATING+*(.gnu.linkonce.sb.*)}
- *(.scommon)
+ ${RELOCATING+*(.scommon)}
${RELOCATING+PROVIDE (__sbss_end = .);}
${RELOCATING+PROVIDE (___sbss_end = .);}
}
${BSS_PLT+${PLT}}
.bss ${RELOCATING-0} :
{
- *(.dynbss)
+ ${RELOCATING+*(.dynbss)}
*(.bss)
${RELOCATING+*(.bss.*)}
${RELOCATING+*(.gnu.linkonce.b.*)}
- *(COMMON)
+ ${RELOCATING+*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
- ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ . = ALIGN(${ALIGNMENT});}
}
${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
${RELOCATING+. = ALIGN(${ALIGNMENT});}
.comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
-
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
-
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
-
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
-
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
+EOF
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
+. $srcdir/scripttempl/DWARF.sc
+cat <<EOF
${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
/* These must appear regardless of ${RELOCATING}. */
projects / deliverable / binutils-gdb.git / blobdiff