+# Support routines for LD testsuite.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+# 2004, 2005 Free Software Foundation, Inc.
#
-# default_ld_version
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+#
+# default_ld_version
# extract and print the version number of ld
#
proc default_ld_version { ld } {
perror "$ld does not exist"
exit 1
}
-
+
catch "exec $ld --version" tmp
set tmp [prune_warnings $tmp]
regexp "\[^\n\]* (cygnus-|)(\[-0-9.a-zA-Z-\]+)\[\r\n\].*" $tmp version cyg number
}
#
-# default_ld_relocate
+# default_ld_relocate
# link an object using relocation
#
proc default_ld_relocate { ld target objects } {
global HOSTING_EMU
global host_triplet
-
+
if { [which $ld] == 0 } then {
perror "$ld does not exist"
return 0
}
-
+
verbose -log "$ld $HOSTING_EMU -o $target -r $objects"
-
+
catch "exec $ld $HOSTING_EMU -o $target -r $objects" exec_output
set exec_output [prune_warnings $exec_output]
if [string match "" $exec_output] then {
}
}
+# Check to see if ld is being invoked with a non-endian output format
+
+proc is_endian_output_format { object_flags } {
+
+ if {[string match "*-oformat binary*" $object_flags] || \
+ [string match "*-oformat ieee*" $object_flags] || \
+ [string match "*-oformat ihex*" $object_flags] || \
+ [string match "*-oformat netbsd-core*" $object_flags] || \
+ [string match "*-oformat srec*" $object_flags] || \
+ [string match "*-oformat tekhex*" $object_flags] || \
+ [string match "*-oformat trad-core*" $object_flags] } then {
+ return 0
+ } else {
+ return 1
+ }
+}
+
# Look for big-endian or little-endian switches in the multlib
# options and translate these into a -EB or -EL switch. Note
# we cannot rely upon proc process_multilib_options to do this
# process_multilib_options.
proc big_or_little_endian {} {
-
+
if [board_info [target_info name] exists multilib_flags] {
- set tmp_flags " [board_info [target_info name] multilib_flags]";
+ set tmp_flags " [board_info [target_info name] multilib_flags]"
foreach x $tmp_flags {
case $x in {
- {*big*endian eb EB} {
+ {*big*endian eb EB -eb -EB -mb} {
set flags " -EB"
return $flags
}
- {*little*endian el EL} {
+ {*little*endian el EL -el -EL -ml} {
set flags " -EL"
return $flags
}
}
#
-# default_ld_link
+# default_ld_link
# link a program using ld
#
proc default_ld_link { ld target objects } {
global HOSTING_EMU
global HOSTING_CRT0
global HOSTING_LIBS
+ global LIBS
global host_triplet
-
+ global link_output
+
set objs "$HOSTING_CRT0 $objects"
- set libs "$HOSTING_LIBS"
-
+ set libs "$LIBS $HOSTING_LIBS"
+
if { [which $ld] == 0 } then {
perror "$ld does not exist"
return 0
}
-
- set flags [big_or_little_endian]
-
+
+ if [is_endian_output_format $objects] then {
+ set flags [big_or_little_endian]
+ } else {
+ set flags ""
+ }
verbose -log "$ld $HOSTING_EMU $flags -o $target $objs $libs"
-
- catch "exec $ld $HOSTING_EMU $flags -o $target $objs $libs" exec_output
- set exec_output [prune_warnings $exec_output]
- if [string match "" $exec_output] then {
+
+ catch "exec $ld $HOSTING_EMU $flags -o $target $objs $libs" link_output
+ set exec_output [prune_warnings $link_output]
+ if [string match "" $link_output] then {
return 1
} else {
- verbose -log "$exec_output"
+ verbose -log "$link_output"
return 0
}
}
#
-# default_ld_simple_link
+# default_ld_simple_link
# link a program using ld, without including any libraries
#
proc default_ld_simple_link { ld target objects } {
global host_triplet
-
+ global link_output
+ global gcc_ld_flag
+
if { [which $ld] == 0 } then {
perror "$ld does not exist"
return 0
}
-
- set flags [big_or_little_endian]
-
+
+ if [is_endian_output_format $objects] then {
+ set flags [big_or_little_endian]
+ } else {
+ set flags ""
+ }
+
+ # If we are compiling with gcc, we want to add gcc_ld_flag to
+ # flags. Rather than determine this in some complex way, we guess
+ # based on the name of the compiler.
+ set ldexe $ld
+ set ldparm [string first " " $ld]
+ if { $ldparm > 0 } then {
+ set ldexe [string range $ld 0 $ldparm]
+ }
+ set ldexe [string replace $ldexe 0 [string last "/" $ldexe] ""]
+ if {[string match "*gcc*" $ldexe] || [string match "*++*" $ldexe]} then {
+ set flags "$gcc_ld_flag $flags"
+ }
+
verbose -log "$ld $flags -o $target $objects"
-
- catch "exec $ld $flags -o $target $objects" exec_output
- set exec_output [prune_warnings $exec_output]
+
+ catch "exec $ld $flags -o $target $objects" link_output
+ set exec_output [prune_warnings $link_output]
# We don't care if we get a warning about a non-existent start
# symbol, since the default linker script might use ENTRY.
}
#
-# default_ld_compile
+# default_ld_compile
# compile an object using cc
#
proc default_ld_compile { cc source object } {
# If we are compiling with gcc, we want to add gcc_gas_flag to
# flags. Rather than determine this in some complex way, we guess
# based on the name of the compiler.
- if {[string match "*gcc*" $cc] || [string match "*++*" $cc]} then {
+ set ccexe $cc
+ set ccparm [string first " " $cc]
+ if { $ccparm > 0 } then {
+ set ccexe [string range $cc 0 $ccparm]
+ }
+ set ccexe [string replace $ccexe 0 [string last "/" $ccexe] ""]
+ if {[string match "*gcc*" $ccexe] || [string match "*++*" $ccexe]} then {
set flags "$gcc_gas_flag $flags"
}
if [board_info [target_info name] exists multilib_flags] {
- append flags " [board_info [target_info name] multilib_flags]";
+ append flags " [board_info [target_info name] multilib_flags]"
}
verbose -log "$cc $flags -c $source -o $object"
proc default_ld_assemble { as source object } {
global ASFLAGS
global host_triplet
-
+
if {[which $as] == 0} then {
perror "$as does not exist"
return 0
# default_ld_nm
# run nm on a file, putting the result in the array nm_output
#
-proc default_ld_nm { nm object } {
+proc default_ld_nm { nm nmflags object } {
global NMFLAGS
global nm_output
global host_triplet
if ![info exists NMFLAGS] { set NMFLAGS "" }
- verbose -log "$nm $NMFLAGS $object >tmpdir/nm.out"
+ # Ensure consistent sorting of symbols
+ if {[info exists env(LC_ALL)]} {
+ set old_lc_all $env(LC_ALL)
+ }
+ set env(LC_ALL) "C"
+ verbose -log "$nm $NMFLAGS $nmflags $object >tmpdir/nm.out"
- catch "exec $nm $NMFLAGS $object >tmpdir/nm.out" exec_output
+ catch "exec $nm $NMFLAGS $nmflags $object >tmpdir/nm.out" exec_output
+ if {[info exists old_lc_all]} {
+ set env(LC_ALL) $old_lc_all
+ } else {
+ unset env(LC_ALL)
+ }
set exec_output [prune_warnings $exec_output]
if [string match "" $exec_output] then {
set file [open tmpdir/nm.out r]
while { [gets $file line] != -1 } {
verbose "$line" 2
- if [regexp "^(\[0-9a-fA-F\]+) \[a-zA-Z0-9\] (.+)$" $line whole value name] {
+ if [regexp "^(\[0-9a-fA-F\]+) \[a-zA-Z0-9\] \\.*(.+)$" $line whole value name] {
set name [string trimleft $name "_"]
verbose "Setting nm_output($name) to 0x$value" 2
set nm_output($name) 0x$value
}
}
+#
+# is_elf_format
+# true if the object format is known to be ELF
+#
+proc is_elf_format {} {
+ if { ![istarget *-*-sysv4*] \
+ && ![istarget *-*-unixware*] \
+ && ![istarget *-*-elf*] \
+ && ![istarget *-*-eabi*] \
+ && ![istarget hppa*64*-*-hpux*] \
+ && ![istarget *-*-linux*] \
+ && ![istarget frv-*-uclinux*] \
+ && ![istarget *-*-irix5*] \
+ && ![istarget *-*-irix6*] \
+ && ![istarget *-*-netbsd*] \
+ && ![istarget *-*-solaris2*] } {
+ return 0
+ }
+
+ if { [istarget *-*-linux*aout*] \
+ || [istarget *-*-linux*oldld*] } {
+ return 0
+ }
+
+ if { ![istarget *-*-netbsdelf*] \
+ && ([istarget *-*-netbsd*aout*] \
+ || [istarget *-*-netbsdpe*] \
+ || [istarget arm*-*-netbsd*] \
+ || [istarget sparc-*-netbsd*] \
+ || [istarget i*86-*-netbsd*] \
+ || [istarget m68*-*-netbsd*] \
+ || [istarget vax-*-netbsd*] \
+ || [istarget ns32k-*-netbsd*]) } {
+ return 0
+ }
+ return 1
+}
+
+#
+# is_elf64
+# true if the object format is known to be 64bit ELF
+proc is_elf64 { binary_file } {
+ global READELF
+ global READELFFLAGS
+
+ set readelf_size ""
+ catch "exec $READELF $READELFFLAGS -h $binary_file > readelf.out" got
+
+ if ![string match "" $got] then {
+ return 0
+ }
+
+ if { ![regexp "\n\[ \]*Class:\[ \]*ELF(\[0-9\]+)\n" \
+ [file_contents readelf.out] nil readelf_size] } {
+ return 0
+ }
+
+ if { $readelf_size == "64" } {
+ return 1
+ }
+
+ return 0
+}
+
+#
+# is_aout_format
+# true if the object format is known to be aout
+proc is_aout_format {} {
+ if { [istarget *-*-*\[ab\]out*] \
+ || [istarget *-*-linux*oldld*] \
+ || [istarget *-*-msdos*] \
+ || [istarget arm-*-netbsd] \
+ || [istarget i?86-*-netbsd] \
+ || [istarget i?86-*-mach*] \
+ || [istarget i?86-*-vsta] \
+ || [istarget pdp11-*-*] \
+ || [istarget m68*-ericsson-ose] \
+ || [istarget m68k-hp-bsd*] \
+ || [istarget m68*-*-hpux*] \
+ || [istarget m68*-*-netbsd] \
+ || [istarget m68*-*-netbsd*4k*] \
+ || [istarget m68k-sony-*] \
+ || [istarget m68*-sun-sunos\[34\]*] \
+ || [istarget m68*-wrs-vxworks*] \
+ || [istarget ns32k-*-*] \
+ || [istarget sparc*-*-netbsd] \
+ || [istarget sparc-sun-sunos4*] \
+ || [istarget vax-dec-ultrix*] \
+ || [istarget vax-*-netbsd] } {
+ return 1
+ }
+ return 0
+}
+
+#
+# is_pecoff_format
+# true if the object format is known to be PECOFF
+#
+proc is_pecoff_format {} {
+ if { ![istarget *-*-mingw32*] \
+ && ![istarget *-*-cygwin*] \
+ && ![istarget *-*-pe*] } {
+ return 0
+ }
+
+ return 1
+}
+
#
# simple_diff
# compares two files line-by-line
#
proc simple_diff { file_1 file_2 } {
global target
-
+
set eof -1
set differences 0
-
+
if [file exists $file_1] then {
set file_a [open $file_1 r]
} else {
warning "$file_1 doesn't exist"
return
}
-
+
if [file exists $file_2] then {
set file_b [open $file_2 r]
} else {
fail "$file_2 doesn't exist"
return
}
-
+
verbose "# Diff'ing: $file_1 $file_2\n" 2
-
+
while { [gets $file_a line] != $eof } {
if [regexp "^#.*$" $line] then {
continue
}
}
close $file_a
-
+
while { [gets $file_b line] != $eof } {
if [regexp "^#.*$" $line] then {
continue
return
}
}
-
+
if { [llength $list_a] != [llength $list_b] } {
fail "Test: $target"
return
}
}
+# run_dump_test FILE
+# Copied from gas testsuite, tweaked and further extended.
+#
+# Assemble a .s file, then run some utility on it and check the output.
+#
+# There should be an assembly language file named FILE.s in the test
+# suite directory, and a pattern file called FILE.d. `run_dump_test'
+# will assemble FILE.s, run some tool like `objdump', `objcopy', or
+# `nm' on the .o file to produce textual output, and then analyze that
+# with regexps. The FILE.d file specifies what program to run, and
+# what to expect in its output.
+#
+# The FILE.d file begins with zero or more option lines, which specify
+# flags to pass to the assembler, the program to run to dump the
+# assembler's output, and the options it wants. The option lines have
+# the syntax:
+#
+# # OPTION: VALUE
+#
+# OPTION is the name of some option, like "name" or "objdump", and
+# VALUE is OPTION's value. The valid options are described below.
+# Whitespace is ignored everywhere, except within VALUE. The option
+# list ends with the first line that doesn't match the above syntax
+# (hmm, not great for error detection).
+#
+# The interesting options are:
+#
+# name: TEST-NAME
+# The name of this test, passed to DejaGNU's `pass' and `fail'
+# commands. If omitted, this defaults to FILE, the root of the
+# .s and .d files' names.
+#
+# as: FLAGS
+# When assembling, pass FLAGS to the assembler.
+# If assembling several files, you can pass different assembler
+# options in the "source" directives. See below.
+#
+# ld: FLAGS
+# Link assembled files using FLAGS, in the order of the "source"
+# directives, when using multiple files.
+#
+# objcopy_linked_file: FLAGS
+# Run objcopy on the linked file with the specified flags.
+# This lets you transform the linked file using objcopy, before the
+# result is analyzed by an analyzer program specified below (which
+# may in turn *also* be objcopy).
+#
+# PROG: PROGRAM-NAME
+# The name of the program to run to analyze the .o file produced
+# by the assembler or the linker output. This can be omitted;
+# run_dump_test will guess which program to run by seeing which of
+# the flags options below is present.
+#
+# objdump: FLAGS
+# nm: FLAGS
+# objcopy: FLAGS
+# Use the specified program to analyze the assembler or linker
+# output file, and pass it FLAGS, in addition to the output name.
+# Note that they are run with LC_ALL=C in the environment to give
+# consistent sorting of symbols.
+#
+# source: SOURCE [FLAGS]
+# Assemble the file SOURCE.s using the flags in the "as" directive
+# and the (optional) FLAGS. If omitted, the source defaults to
+# FILE.s.
+# This is useful if several .d files want to share a .s file.
+# More than one "source" directive can be given, which is useful
+# when testing linking.
+#
+# xfail: TARGET
+# The test is expected to fail on TARGET. This may occur more than
+# once.
+#
+# target: TARGET
+# Only run the test for TARGET. This may occur more than once; the
+# target being tested must match at least one.
+#
+# notarget: TARGET
+# Do not run the test for TARGET. This may occur more than once;
+# the target being tested must not match any of them.
+#
+# error: REGEX
+# An error with message matching REGEX must be emitted for the test
+# to pass. The PROG, objdump, nm and objcopy options have no
+# meaning and need not supplied if this is present.
+#
+# warning: REGEX
+# Expect a linker warning matching REGEX. It is an error to issue
+# both "error" and "warning".
+#
+# Each option may occur at most once unless otherwise mentioned.
+#
+# After the option lines come regexp lines. `run_dump_test' calls
+# `regexp_diff' to compare the output of the dumping tool against the
+# regexps in FILE.d. `regexp_diff' is defined later in this file; see
+# further comments there.
+
+proc run_dump_test { name } {
+ global subdir srcdir
+ global OBJDUMP NM AS OBJCOPY READELF LD
+ global OBJDUMPFLAGS NMFLAGS ASFLAGS OBJCOPYFLAGS READELFFLAGS LDFLAGS
+ global host_triplet runtests
+ global env
+
+ if [string match "*/*" $name] {
+ set file $name
+ set name [file tail $name]
+ } else {
+ set file "$srcdir/$subdir/$name"
+ }
+
+ if ![runtest_file_p $runtests $name] then {
+ return
+ }
+
+ set opt_array [slurp_options "${file}.d"]
+ if { $opt_array == -1 } {
+ perror "error reading options from $file.d"
+ unresolved $subdir/$name
+ return
+ }
+ set dumpfile tmpdir/dump.out
+ set run_ld 0
+ set run_objcopy 0
+ set opts(as) {}
+ set opts(ld) {}
+ set opts(xfail) {}
+ set opts(target) {}
+ set opts(notarget) {}
+ set opts(objdump) {}
+ set opts(nm) {}
+ set opts(objcopy) {}
+ set opts(readelf) {}
+ set opts(name) {}
+ set opts(PROG) {}
+ set opts(source) {}
+ set opts(error) {}
+ set opts(warning) {}
+ set opts(objcopy_linked_file) {}
+ set asflags(${file}.s) {}
+
+ foreach i $opt_array {
+ set opt_name [lindex $i 0]
+ set opt_val [lindex $i 1]
+ if ![info exists opts($opt_name)] {
+ perror "unknown option $opt_name in file $file.d"
+ unresolved $subdir/$name
+ return
+ }
+
+ switch -- $opt_name {
+ xfail {}
+ target {}
+ notarget {}
+ source {
+ # Move any source-specific as-flags to a separate array to
+ # simplify processing.
+ if { [llength $opt_val] > 1 } {
+ set asflags([lindex $opt_val 0]) [lrange $opt_val 1 end]
+ set opt_val [lindex $opt_val 0]
+ } else {
+ set asflags($opt_val) {}
+ }
+ }
+ default {
+ if [string length $opts($opt_name)] {
+ perror "option $opt_name multiply set in $file.d"
+ unresolved $subdir/$name
+ return
+ }
+
+ # A single "# ld:" with no options should do the right thing.
+ if { $opt_name == "ld" } {
+ set run_ld 1
+ }
+ # Likewise objcopy_linked_file.
+ if { $opt_name == "objcopy_linked_file" } {
+ set run_objcopy 1
+ }
+ }
+ }
+ set opts($opt_name) [concat $opts($opt_name) $opt_val]
+ }
+
+ # Decide early whether we should run the test for this target.
+ if { [llength $opts(target)] > 0 } {
+ set targmatch 0
+ foreach targ $opts(target) {
+ if [istarget $targ] {
+ set targmatch 1
+ break
+ }
+ }
+ if { $targmatch == 0 } {
+ return
+ }
+ }
+ foreach targ $opts(notarget) {
+ if [istarget $targ] {
+ return
+ }
+ }
+
+ set program ""
+ # It's meaningless to require an output-testing method when we
+ # expect an error.
+ if { $opts(error) == "" } {
+ if {$opts(PROG) != ""} {
+ switch -- $opts(PROG) {
+ objdump { set program objdump }
+ nm { set program nm }
+ objcopy { set program objcopy }
+ readelf { set program readelf }
+ default
+ { perror "unrecognized program option $opts(PROG) in $file.d"
+ unresolved $subdir/$name
+ return }
+ }
+ } else {
+ # Guess which program to run, by seeing which option was specified.
+ foreach p {objdump objcopy nm readelf} {
+ if {$opts($p) != ""} {
+ if {$program != ""} {
+ perror "ambiguous dump program in $file.d"
+ unresolved $subdir/$name
+ return
+ } else {
+ set program $p
+ }
+ }
+ }
+ }
+ if { $program == "" && $opts(warning) == "" } {
+ perror "dump program unspecified in $file.d"
+ unresolved $subdir/$name
+ return
+ }
+ }
+
+ if { $opts(name) == "" } {
+ set testname "$subdir/$name"
+ } else {
+ set testname $opts(name)
+ }
+
+ if { $opts(source) == "" } {
+ set sourcefiles [list ${file}.s]
+ } else {
+ set sourcefiles {}
+ foreach sf $opts(source) {
+ if { [string match "/*" $sf] } {
+ lappend sourcefiles "$sf"
+ } else {
+ lappend sourcefiles "$srcdir/$subdir/$sf"
+ }
+ # Must have asflags indexed on source name.
+ set asflags($srcdir/$subdir/$sf) $asflags($sf)
+ }
+ }
+
+ # Time to setup xfailures.
+ foreach targ $opts(xfail) {
+ setup_xfail $targ
+ }
+
+ # Assemble each file.
+ set objfiles {}
+ for { set i 0 } { $i < [llength $sourcefiles] } { incr i } {
+ set sourcefile [lindex $sourcefiles $i]
+
+ set objfile "tmpdir/dump$i.o"
+ lappend objfiles $objfile
+ set cmd "$AS $ASFLAGS $opts(as) $asflags($sourcefile) -o $objfile $sourcefile"
+
+ send_log "$cmd\n"
+ set cmdret [catch "exec $cmd" comp_output]
+ set comp_output [prune_warnings $comp_output]
+
+ if { $cmdret != 0 || ![string match "" $comp_output] } then {
+ send_log "$comp_output\n"
+ verbose "$comp_output" 3
+
+ set exitstat "succeeded"
+ if { $cmdret != 0 } { set exitstat "failed" }
+ verbose -log "$exitstat with: <$comp_output>"
+ fail $testname
+ return
+ }
+ }
+
+ set expmsg $opts(error)
+ if { $opts(warning) != "" } {
+ if { $expmsg != "" } {
+ perror "$testname: mixing error and warning test-directives"
+ return
+ }
+ set expmsg $opts(warning)
+ }
+
+ # Perhaps link the file(s).
+ if { $run_ld } {
+ set objfile "tmpdir/dump"
+
+ # Add -L$srcdir/$subdir so that the linker command can use
+ # linker scripts in the source directory.
+ set cmd "$LD $LDFLAGS -L$srcdir/$subdir \
+ $opts(ld) -o $objfile $objfiles"
+
+ send_log "$cmd\n"
+ set cmdret [catch "exec $cmd" comp_output]
+ set comp_output [prune_warnings $comp_output]
+
+ if { $cmdret != 0 } then {
+ # If the executed program writes to stderr and stderr is not
+ # redirected, exec *always* returns failure, regardless of the
+ # program exit code. Thankfully, we can retrieve the true
+ # return status from a special variable. Redirection would
+ # cause a tcl-specific message to be appended, and we'd rather
+ # not deal with that if we can help it.
+ global errorCode
+ if { [lindex $errorCode 0] == "NONE" } {
+ set cmdret 0
+ }
+ }
+
+ if { $cmdret == 0 && $run_objcopy } {
+ set infile $objfile
+ set objfile "tmpdir/dump1"
+
+ # Note that we don't use OBJCOPYFLAGS here; any flags must be
+ # explicitly specified.
+ set cmd "$OBJCOPY $opts(objcopy_linked_file) $infile $objfile"
+
+ send_log "$cmd\n"
+ set cmdret [catch "exec $cmd" comp_output]
+ append comp_output [prune_warnings $comp_output]
+
+ if { $cmdret != 0 } then {
+ global errorCode
+ if { [lindex $errorCode 0] == "NONE" } {
+ set cmdret 0
+ }
+ }
+ }
+
+ if { $cmdret != 0 || $comp_output != "" || $expmsg != "" } then {
+ set exitstat "succeeded"
+ if { $cmdret != 0 } { set exitstat "failed" }
+ verbose -log "$exitstat with: <$comp_output>, expected: <$expmsg>"
+ send_log "$comp_output\n"
+ verbose "$comp_output" 3
+
+ if { [regexp $expmsg $comp_output] \
+ && (($cmdret == 0) == ($opts(warning) != "")) } {
+ # We have the expected output from ld.
+ if { $opts(error) != "" || $program == "" } {
+ pass $testname
+ return
+ }
+ } else {
+ verbose -log "$exitstat with: <$comp_output>, expected: <$expmsg>"
+ fail $testname
+ return
+ }
+ }
+ } else {
+ set objfile "tmpdir/dump0.o"
+ }
+
+ # We must not have expected failure if we get here.
+ if { $opts(error) != "" } {
+ fail $testname
+ return
+ }
+
+ set progopts1 $opts($program)
+ eval set progopts \$[string toupper $program]FLAGS
+ eval set binary \$[string toupper $program]
+
+ if { [which $binary] == 0 } {
+ untested $testname
+ return
+ }
+
+ if { $progopts1 == "" } { set $progopts1 "-r" }
+ verbose "running $binary $progopts $progopts1" 3
+
+ # Objcopy, unlike the other two, won't send its output to stdout,
+ # so we have to run it specially.
+ set cmd "$binary $progopts $progopts1 $objfile > $dumpfile"
+ if { $program == "objcopy" } {
+ set cmd "$binary $progopts $progopts1 $objfile $dumpfile"
+ }
+
+ # Ensure consistent sorting of symbols
+ if {[info exists env(LC_ALL)]} {
+ set old_lc_all $env(LC_ALL)
+ }
+ set env(LC_ALL) "C"
+ send_log "$cmd\n"
+ catch "exec $cmd" comp_output
+ if {[info exists old_lc_all]} {
+ set env(LC_ALL) $old_lc_all
+ } else {
+ unset env(LC_ALL)
+ }
+ set comp_output [prune_warnings $comp_output]
+ if ![string match "" $comp_output] then {
+ send_log "$comp_output\n"
+ fail $testname
+ return
+ }
+
+ verbose_eval {[file_contents $dumpfile]} 3
+ if { [regexp_diff $dumpfile "${file}.d"] } then {
+ fail $testname
+ verbose "output is [file_contents $dumpfile]" 2
+ return
+ }
+
+ pass $testname
+}
+
+proc slurp_options { file } {
+ if [catch { set f [open $file r] } x] {
+ #perror "couldn't open `$file': $x"
+ perror "$x"
+ return -1
+ }
+ set opt_array {}
+ # whitespace expression
+ set ws {[ ]*}
+ set nws {[^ ]*}
+ # whitespace is ignored anywhere except within the options list;
+ # option names are alphabetic plus underscore only.
+ set pat "^#${ws}(\[a-zA-Z_\]*)$ws:${ws}(.*)$ws\$"
+ while { [gets $f line] != -1 } {
+ set line [string trim $line]
+ # Whitespace here is space-tab.
+ if [regexp $pat $line xxx opt_name opt_val] {
+ # match!
+ lappend opt_array [list $opt_name $opt_val]
+ } else {
+ break
+ }
+ }
+ close $f
+ return $opt_array
+}
+
+# regexp_diff, copied from gas, based on simple_diff above.
+# compares two files line-by-line
+# file1 contains strings, file2 contains regexps and #-comments
+# blank lines are ignored in either file
+# returns non-zero if differences exist
+#
+proc regexp_diff { file_1 file_2 } {
+
+ set eof -1
+ set end_1 0
+ set end_2 0
+ set differences 0
+ set diff_pass 0
+
+ if [file exists $file_1] then {
+ set file_a [open $file_1 r]
+ } else {
+ warning "$file_1 doesn't exist"
+ return 1
+ }
+
+ if [file exists $file_2] then {
+ set file_b [open $file_2 r]
+ } else {
+ fail "$file_2 doesn't exist"
+ close $file_a
+ return 1
+ }
+
+ verbose " Regexp-diff'ing: $file_1 $file_2" 2
+
+ while { 1 } {
+ set line_a ""
+ set line_b ""
+ while { [string length $line_a] == 0 } {
+ if { [gets $file_a line_a] == $eof } {
+ set end_1 1
+ break
+ }
+ }
+ while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
+ if [ string match "#pass" $line_b ] {
+ set end_2 1
+ set diff_pass 1
+ break
+ } elseif [ string match "#..." $line_b ] {
+ if { [gets $file_b line_b] == $eof } {
+ set end_2 1
+ break
+ }
+ verbose "looking for \"^$line_b$\"" 3
+ while { ![regexp "^$line_b$" "$line_a"] } {
+ verbose "skipping \"$line_a\"" 3
+ if { [gets $file_a line_a] == $eof } {
+ set end_1 1
+ break
+ }
+ }
+ break
+ }
+ if { [gets $file_b line_b] == $eof } {
+ set end_2 1
+ break
+ }
+ }
+
+ if { $diff_pass } {
+ break
+ } elseif { $end_1 && $end_2 } {
+ break
+ } elseif { $end_1 } {
+ send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
+ verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
+ set differences 1
+ break
+ } elseif { $end_2 } {
+ send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
+ verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
+ set differences 1
+ break
+ } else {
+ verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
+ if ![regexp "^$line_b$" "$line_a"] {
+ send_log "regexp_diff match failure\n"
+ send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
+ set differences 1
+ }
+ }
+ }
+
+ if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
+ send_log "$file_1 and $file_2 are different lengths\n"
+ verbose "$file_1 and $file_2 are different lengths" 3
+ set differences 1
+ }
+
+ close $file_a
+ close $file_b
+
+ return $differences
+}
+
+proc file_contents { filename } {
+ set file [open $filename r]
+ set contents [read $file]
+ close $file
+ return $contents
+}
+
+# List contains test-items with 3 items followed by 2 lists, one item and
+# one optional item:
+# 0:name 1:ld options 2:assembler options
+# 3:filenames of assembler files 4: action and options. 5: name of output file
+# 6:compiler flags (optional)
+
+# Actions:
+# objdump: Apply objdump options on result. Compare with regex (last arg).
+# nm: Apply nm options on result. Compare with regex (last arg).
+# readelf: Apply readelf options on result. Compare with regex (last arg).
+
+proc run_ld_link_tests { ldtests } {
+ global ld
+ global as
+ global nm
+ global objdump
+ global READELF
+ global srcdir
+ global subdir
+ global env
+ global CC
+ global CFLAGS
+
+ foreach testitem $ldtests {
+ set testname [lindex $testitem 0]
+ set ld_options [lindex $testitem 1]
+ set as_options [lindex $testitem 2]
+ set src_files [lindex $testitem 3]
+ set actions [lindex $testitem 4]
+ set binfile tmpdir/[lindex $testitem 5]
+ set cflags [lindex $testitem 6]
+ set objfiles {}
+ set is_unresolved 0
+ set failed 0
+
+# verbose -log "Testname is $testname"
+# verbose -log "ld_options is $ld_options"
+# verbose -log "as_options is $as_options"
+# verbose -log "src_files is $src_files"
+# verbose -log "actions is $actions"
+# verbose -log "binfile is $binfile"
+
+ # Assemble each file in the test.
+ foreach src_file $src_files {
+ set objfile "tmpdir/[file rootname $src_file].o"
+ lappend objfiles $objfile
+
+ if { [file extension $src_file] == ".c" } {
+ set as_file "tmpdir/[file rootname $src_file].s"
+ if ![ld_compile "$CC -S $CFLAGS $cflags" $srcdir/$subdir/$src_file $as_file] {
+ set is_unresolved 1
+ break
+ }
+ } else {
+ set as_file "$srcdir/$subdir/$src_file"
+ }
+ if ![ld_assemble $as "$as_options $as_file" $objfile] {
+ set is_unresolved 1
+ break
+ }
+ }
+
+ # Catch assembler errors.
+ if { $is_unresolved != 0 } {
+ unresolved $testname
+ continue
+ }
+
+ if ![ld_simple_link $ld $binfile "-L$srcdir/$subdir $ld_options $objfiles"] {
+ fail $testname
+ } else {
+ set failed 0
+ foreach actionlist $actions {
+ set action [lindex $actionlist 0]
+ set progopts [lindex $actionlist 1]
+
+ # There are actions where we run regexp_diff on the
+ # output, and there are other actions (presumably).
+ # Handling of the former look the same.
+ set dump_prog ""
+ switch -- $action {
+ objdump
+ { set dump_prog $objdump }
+ nm
+ { set dump_prog $nm }
+ readelf
+ { set dump_prog $READELF }
+ default
+ {
+ perror "Unrecognized action $action"
+ set is_unresolved 1
+ break
+ }
+ }
+
+ if { $dump_prog != "" } {
+ set dumpfile [lindex $actionlist 2]
+ set binary $dump_prog
+
+ # Ensure consistent sorting of symbols
+ if {[info exists env(LC_ALL)]} {
+ set old_lc_all $env(LC_ALL)
+ }
+ set env(LC_ALL) "C"
+ set cmd "$binary $progopts $binfile > dump.out"
+ send_log "$cmd\n"
+ catch "exec $cmd" comp_output
+ if {[info exists old_lc_all]} {
+ set env(LC_ALL) $old_lc_all
+ } else {
+ unset env(LC_ALL)
+ }
+ set comp_output [prune_warnings $comp_output]
+
+ if ![string match "" $comp_output] then {
+ send_log "$comp_output\n"
+ set failed 1
+ break
+ }
+
+ if { [regexp_diff "dump.out" "$srcdir/$subdir/$dumpfile"] } then {
+ verbose "output is [file_contents "dump.out"]" 2
+ set failed 1
+ break
+ }
+ }
+ }
+
+ if { $failed != 0 } {
+ fail $testname
+ } else { if { $is_unresolved == 0 } {
+ pass $testname
+ } }
+ }
+
+ # Catch action errors.
+ if { $is_unresolved != 0 } {
+ unresolved $testname
+ continue
+ }
+ }
+}
+
+
+proc verbose_eval { expr { level 1 } } {
+ global verbose
+ if $verbose>$level then { eval verbose "$expr" $level }
+}
+
# This definition is taken from an unreleased version of DejaGnu. Once
# that version gets released, and has been out in the world for a few
# months at least, it may be safe to delete this copy.