-/* Copyright (C) 2007-2015 B.A.T.M.A.N. contributors:
+/* Copyright (C) 2007-2016 B.A.T.M.A.N. contributors:
*
* Marek Lindner, Simon Wunderlich
*
static void batadv_send_outstanding_bcast_packet(struct work_struct *work);
-/* send out an already prepared packet to the given address via the
- * specified batman interface
+/**
+ * batadv_send_skb_packet - send an already prepared packet
+ * @skb: the packet to send
+ * @hard_iface: the interface to use to send the broadcast packet
+ * @dst_addr: the payload destination
+ *
+ * Send out an already prepared packet to the given neighbor or broadcast it
+ * using the specified interface. Either hard_iface or neigh_node must be not
+ * NULL.
+ * If neigh_node is NULL, then the packet is broadcasted using hard_iface,
+ * otherwise it is sent as unicast to the given neighbor.
+ *
+ * Return: NET_TX_DROP in case of error or the result of dev_queue_xmit(skb)
+ * otherwise
*/
int batadv_send_skb_packet(struct sk_buff *skb,
struct batadv_hard_iface *hard_iface,
const u8 *dst_addr)
{
- struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
+ struct batadv_priv *bat_priv;
struct ethhdr *ethhdr;
+ bat_priv = netdev_priv(hard_iface->soft_iface);
+
if (hard_iface->if_status != BATADV_IF_ACTIVE)
goto send_skb_err;
return NET_XMIT_DROP;
}
+int batadv_send_broadcast_skb(struct sk_buff *skb,
+ struct batadv_hard_iface *hard_iface)
+{
+ return batadv_send_skb_packet(skb, hard_iface, batadv_broadcast_addr);
+}
+
+int batadv_send_unicast_skb(struct sk_buff *skb,
+ struct batadv_neigh_node *neigh)
+{
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+ struct batadv_hardif_neigh_node *hardif_neigh;
+#endif
+ int ret;
+
+ ret = batadv_send_skb_packet(skb, neigh->if_incoming, neigh->addr);
+
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+ hardif_neigh = batadv_hardif_neigh_get(neigh->if_incoming, neigh->addr);
+
+ if ((hardif_neigh) && (ret != NET_XMIT_DROP))
+ hardif_neigh->bat_v.last_unicast_tx = jiffies;
+
+ if (hardif_neigh)
+ batadv_hardif_neigh_put(hardif_neigh);
+#endif
+
+ return ret;
+}
+
/**
* batadv_send_skb_to_orig - Lookup next-hop and transmit skb.
* @skb: Packet to be transmitted.
* host, NULL can be passed as recv_if and no interface alternating is
* attempted.
*
- * Returns NET_XMIT_SUCCESS on success, NET_XMIT_DROP on failure, or
+ * Return: NET_XMIT_SUCCESS on success, NET_XMIT_DROP on failure, or
* NET_XMIT_POLICED if the skb is buffered for later transmit.
*/
int batadv_send_skb_to_orig(struct sk_buff *skb,
if (recv_if && batadv_nc_skb_forward(skb, neigh_node)) {
ret = NET_XMIT_POLICED;
} else {
- batadv_send_skb_packet(skb, neigh_node->if_incoming,
- neigh_node->addr);
+ batadv_send_unicast_skb(skb, neigh_node);
ret = NET_XMIT_SUCCESS;
}
out:
if (neigh_node)
- batadv_neigh_node_free_ref(neigh_node);
+ batadv_neigh_node_put(neigh_node);
return ret;
}
* @hdr_size: amount of bytes to push at the beginning of the skb
* @orig_node: the destination node
*
- * Returns false if the buffer extension was not possible or true otherwise.
+ * Return: false if the buffer extension was not possible or true otherwise.
*/
static bool
batadv_send_skb_push_fill_unicast(struct sk_buff *skb, int hdr_size,
* @skb: the skb containing the payload to encapsulate
* @orig_node: the destination node
*
- * Returns false if the payload could not be encapsulated or true otherwise.
+ * Return: false if the payload could not be encapsulated or true otherwise.
*/
static bool batadv_send_skb_prepare_unicast(struct sk_buff *skb,
struct batadv_orig_node *orig_node)
* unicast 4addr header
* @bat_priv: the bat priv with all the soft interface information
* @skb: the skb containing the payload to encapsulate
- * @orig_node: the destination node
+ * @orig: the destination node
* @packet_subtype: the unicast 4addr packet subtype to use
*
- * Returns false if the payload could not be encapsulated or true otherwise.
+ * Return: false if the payload could not be encapsulated or true otherwise.
*/
bool batadv_send_skb_prepare_unicast_4addr(struct batadv_priv *bat_priv,
struct sk_buff *skb,
ret = true;
out:
if (primary_if)
- batadv_hardif_free_ref(primary_if);
+ batadv_hardif_put(primary_if);
return ret;
}
* as packet_type. Then send this frame to the given orig_node and release a
* reference to this orig_node.
*
- * Returns NET_XMIT_DROP in case of error or NET_XMIT_SUCCESS otherwise.
+ * Return: NET_XMIT_DROP in case of error or NET_XMIT_SUCCESS otherwise.
*/
int batadv_send_skb_unicast(struct batadv_priv *bat_priv,
struct sk_buff *skb, int packet_type,
out:
if (orig_node)
- batadv_orig_node_free_ref(orig_node);
+ batadv_orig_node_put(orig_node);
if (ret == NET_XMIT_DROP)
kfree_skb(skb);
return ret;
* BATADV_UNICAST_4ADDR was supplied as packet_type. Then send this frame
* to the according destination node.
*
- * Returns NET_XMIT_DROP in case of error or NET_XMIT_SUCCESS otherwise.
+ * Return: NET_XMIT_DROP in case of error or NET_XMIT_SUCCESS otherwise.
*/
int batadv_send_skb_via_tt_generic(struct batadv_priv *bat_priv,
struct sk_buff *skb, int packet_type,
* Look up the currently selected gateway. Wrap the given skb into a batman-adv
* unicast header and send this frame to this gateway node.
*
- * Returns NET_XMIT_DROP in case of error or NET_XMIT_SUCCESS otherwise.
+ * Return: NET_XMIT_DROP in case of error or NET_XMIT_SUCCESS otherwise.
*/
int batadv_send_skb_via_gw(struct batadv_priv *bat_priv, struct sk_buff *skb,
unsigned short vid)
{
kfree_skb(forw_packet->skb);
if (forw_packet->if_incoming)
- batadv_hardif_free_ref(forw_packet->if_incoming);
+ batadv_hardif_put(forw_packet->if_incoming);
if (forw_packet->if_outgoing)
- batadv_hardif_free_ref(forw_packet->if_outgoing);
+ batadv_hardif_put(forw_packet->if_outgoing);
kfree(forw_packet);
}
send_time);
}
-/* add a broadcast packet to the queue and setup timers. broadcast packets
- * are sent multiple times to increase probability for being received.
+/**
+ * batadv_add_bcast_packet_to_list - queue broadcast packet for multiple sends
+ * @bat_priv: the bat priv with all the soft interface information
+ * @skb: broadcast packet to add
+ * @delay: number of jiffies to wait before sending
*
- * This function returns NETDEV_TX_OK on success and NETDEV_TX_BUSY on
- * errors.
+ * add a broadcast packet to the queue and setup timers. broadcast packets
+ * are sent multiple times to increase probability for being received.
*
* The skb is not consumed, so the caller should make sure that the
* skb is freed.
+ *
+ * Return: NETDEV_TX_OK on success and NETDEV_TX_BUSY on errors.
*/
int batadv_add_bcast_packet_to_list(struct batadv_priv *bat_priv,
const struct sk_buff *skb,
atomic_inc(&bat_priv->bcast_queue_left);
out:
if (primary_if)
- batadv_hardif_free_ref(primary_if);
+ batadv_hardif_put(primary_if);
return NETDEV_TX_BUSY;
}
/* send a copy of the saved skb */
skb1 = skb_clone(forw_packet->skb, GFP_ATOMIC);
if (skb1)
- batadv_send_skb_packet(skb1, hard_iface,
- batadv_broadcast_addr);
+ batadv_send_broadcast_skb(skb1, hard_iface);
}
rcu_read_unlock();
projects / deliverable / linux.git / blobdiff