Do-first:
-cygnus_files="cgen.sh cgen-asm.in cgen-dis.in"
+cygnus_files="cgen.sh cgen-asm.in cgen-dis.in cgen-opc.in"
if ( echo $* | grep keep\-cygnus > /dev/null ) ; then
keep_these_too="${cygnus_files} ${keep_these_too}"
lose_these_too="${cygnus_files} ${lose_these_too}"
fi
-d30v_files="d30v-dis.c d30v-opc.c"
-
-if ( echo $* | grep keep\-d30v > /dev/null ) ; then
- keep_these_too="${d30v_files} ${keep_these_too}"
-else
- lose_these_too="${d30v_files} ${lose_these_too}"
-fi
-
tic80_files="tic80-opc.c tic80-dis.c"
if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
lose_these_too="${tic80_files} ${lose_these_too}"
fi
-sky_files="txvu-opc.c txvu-dis.c"
+sky_files="dvp-opc.c dvp-dis.c"
if ( echo $* | grep keep\-sky > /dev/null ) ; then
keep_these_too="${sky_files} ${keep_these_too}"
configure.in
d10v-dis.c
d10v-opc.c
+d30v-dis.c
+d30v-opc.c
dep-in.sed
dis-buf.c
disassemble.c
mpw-config.in
mpw-make.sed
ns32k-dis.c
+opintl.h
+po
ppc-dis.c
ppc-opc.c
sh-opc.h
sparc-opc.c
stamp-h.in
sysdep.h
+tic30-dis.c
+vax-dis.c
w65-dis.c
w65-opc.h
v850-opc.c
done
fi
-d30v_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c"
-if ( echo $* | grep keep\-d30v > /dev/null ) ; then
- for i in $d30v_files ; do
- if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+am33_files="ChangeLog m10300-opc.c m10300-dis.c"
+if ( echo $* | grep keep\-am33 > /dev/null ) ; then
+ for i in $am33_files ; do
+ if test ! -d $i && (grep sanitize-am33 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping d30v stuff in $i
+ echo Keeping am33 stuff in $i
fi
fi
done
else
- for i in $d30v_files ; do
- if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+ for i in $am33_files ; do
+ if test ! -d $i && (grep sanitize-am33 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d30v\" from $i...
+ echo Removing traces of \"am33\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
+ sed '/start\-sanitize\-am33/,/end-\sanitize\-am33/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
+
v850e_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c v850-opc.c v850-dis.c"
if ( echo $* | grep keep\-v850e > /dev/null ) ; then
for i in $v850e_files ; do
fi
-r5900_files="ChangeLog mips-opc.c mips-dis.c"
+r5900_files="ChangeLog mips-opc.c mips-dis.c Makefile.am Makefile.in"
if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
for i in $r5900_files ; do
if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
done
fi
-vr5400_files="ChangeLog mips-opc.c mips-dis.c"
-if ( echo $* | grep keep\-vr5400 > /dev/null ) ; then
- for i in $vr5400_files ; do
- if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
+vr4320_files="ChangeLog mips-opc.c mips-dis.c"
+if ( echo $* | grep keep\-vr4320 > /dev/null ) ; then
+ for i in $vr4320_files ; do
+ if test ! -d $i && (grep sanitize-vr4320 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping vr4320 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $vr4320_files ; do
+ if test ! -d $i && (grep sanitize-vr4320 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"vr4320\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-vr4320/,/end-\sanitize\-vr4320/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+cygnus_files="ChangeLog mips-opc.c mips-dis.c"
+if ( echo $* | grep keep\-cygnus > /dev/null ) ; then
+ for i in $cygnus_files ; do
+ if test ! -d $i && (grep sanitize-cygnus $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping vr5400 stuff in $i
+ echo Keeping cygnus stuff in $i
fi
fi
done
else
- for i in $vr5400_files ; do
- if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
+ for i in $cygnus_files ; do
+ if test ! -d $i && (grep sanitize-cygnus $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"vr5400\" from $i...
+ echo Removing traces of \"cygnus\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-vr5400/,/end-\sanitize\-vr5400/d' < $i > new
+ sed '/start\-sanitize\-cygnus/,/end-\sanitize\-cygnus/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-if [ -n "${verbose}" ] ; then
- echo Processing \"sh4\"...
+sky_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c mips-dis.c"
+if ( echo $* | grep keep\-sky > /dev/null ) ; then
+ for i in $sky_files ; do
+ if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping sky stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $sky_files ; do
+ if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"sky\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-sky/,/end-\sanitize\-sky/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
fi
-sh4_files="ChangeLog sh-opc.h sh-dis.c"
-if ( echo $* | grep keep\-sh4 > /dev/null ) ; then
- for i in $sh4_files ; do
- if test ! -d $i && (grep sanitize-sh4 $i > /dev/null) ; then
+m32rx_files="ChangeLog m32r-opc.c m32r-opc.h m32r-dis.c m32r-asm.c"
+if ( echo $* | grep keep\-m32rx > /dev/null ) ; then
+ for i in $m32rx_files ; do
+ if test -f $i && (grep sanitize-m32rx $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping sh4 stuff in $i
+ echo Keeping m32rx stuff in $i
fi
fi
done
else
- for i in $sh4_files ; do
- if test ! -d $i && (grep sanitize-sh4 $i > /dev/null) ; then
+ for i in $m32rx_files ; do
+ if test -f $i && (grep sanitize-m32rx $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"sh4\" from $i...
+ echo Removing traces of \"m32rx\" from $i...
fi
cp $i new
- sed -e '/start\-sanitize\-sh4/,/end-\sanitize\-sh4/d' -e 's/.*restore\-sanitize\-sh4//' < $i > new
+ # The PIPE sanitization will be much cleaner with redact.
+ sed -e '/start\-sanitize\-m32rx/,/end\-sanitize\-m32rx/d' \
+ -e 's/, PIPE_[A-Z]*//g' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-sky_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c"
-if ( echo $* | grep keep\-sky > /dev/null ) ; then
- for i in $sky_files ; do
- if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+nortel_ppc750_files="ChangeLog ppc-opc.c"
+if ( echo $* | grep keep\-nortel-ppc750 > /dev/null ) ; then
+ for i in $nortel_ppc750_files ; do
+ if test -f $i && (grep sanitize-nortel-ppc750 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping sky stuff in $i
+ echo Keeping m32rx stuff in $i
fi
fi
done
else
- for i in $sky_files ; do
- if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+ for i in $nortel_ppc750_files ; do
+ if test -f $i && (grep sanitize-nortel-ppc750 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"sky\" from $i...
+ echo Removing traces of \"m32rx\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-sky/,/end-\sanitize\-sky/d' < $i > new
+ # The PIPE sanitization will be much cleaner with redact.
+ sed -e '/start\-sanitize\-nortel-ppc750/,/end\-sanitize\-nortel-ppc750/d' \
+ -e 's/, PIPE_[A-Z]*//g' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-for i in * ; do
- if test ! -d $i && (grep sanitize $i > /dev/null) ; then
- echo '***' Some mentions of Sanitize are still left in $i! 1>&2
- fi
+for i in *; do
+ if test ! -d $i && (grep sanitize $i > /dev/null) ; then
+ echo '***' Some mentions of Sanitize are still left in opcodes/$i! 1>&2
+ fi
+done
+
+for lost in .. $lose_these_too; do
+ if test $lost != ..; then
+ for i in Makefile.am Makefile.in configure.in configure; do
+ if fgrep $lost $i >/dev/null 2>&1; then
+ echo '***' File $lost was sanitized out but is still mentioned in opcodes/$i 1>&2
+ fi
+ done
+ fi
done
+# This must come after all other sanitizations. Re-sanitize the .pot
+# file.
+if [ -n "${verbose}" ]; then
+ echo Re-computing files for gettext ...
+fi
+
+if [ -n "${safe}" -a ! -f po/.Recover/POTFILES.in ]; then
+ if [ -n "${verbose}" ]; then
+ echo Caching po/POTFILES.in in .Recover...
+ fi
+ mv po/POTFILES.in po/.Recover
+fi
+
+ls -1 *.[ch] cg*.in 2>/dev/null | sed -e 's,^\./,,' > po/POTFILES.in
+
+if [ -n "${safe}" -a ! -f po/.Recover/opcodes.pot ]; then
+ if [ -n "${verbose}" ]; then
+ echo Caching po/opcodes.pot in .Recover...
+ fi
+ mv po/opcodes.pot po/.Recover
+fi
+
+# If this fails, Sanitization must fail.
+xgettext -C -c -k_ -kN_ -f po/POTFILES.in -o po/opcodes.pot || exit 1
+
# End of file.