Do-first:
-mpw_files="mpw-make.in mpw-config.in ChangeLog.mpw"
+cygnus_files="cgen.sh cgen-asm.in cgen-dis.in"
-if ( echo $* | grep keep\-mpw > /dev/null ) ; then
- keep_these_too="${mpw_files} ${keep_these_too}"
+if ( echo $* | grep keep\-cygnus > /dev/null ) ; then
+ keep_these_too="${cygnus_files} ${keep_these_too}"
else
- lose_these_too="${mpw_files} ${lose_these_too}"
+ lose_these_too="${cygnus_files} ${lose_these_too}"
fi
-rce_files="rce-dis.c rce-opc.h"
+d30v_files="d30v-dis.c d30v-opc.c"
-if ( echo $* | grep keep\-rce > /dev/null ) ; then
- keep_these_too="${rce_files} ${keep_these_too}"
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+ keep_these_too="${d30v_files} ${keep_these_too}"
else
- lose_these_too="${rce_files} ${lose_these_too}"
+ lose_these_too="${d30v_files} ${lose_these_too}"
+fi
+
+tic80_files="tic80-opc.c tic80-dis.c"
+
+if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
+ keep_these_too="${tic80_files} ${keep_these_too}"
+else
+ lose_these_too="${tic80_files} ${lose_these_too}"
+fi
+
+sky_files="txvu-opc.c txvu-dis.c"
+
+if ( echo $* | grep keep\-sky > /dev/null ) ; then
+ keep_these_too="${sky_files} ${keep_these_too}"
+else
+ lose_these_too="${sky_files} ${lose_these_too}"
fi
# All files listed between the "Things-to-keep:" line and the
Things-to-keep:
ChangeLog
+Makefile.am
Makefile.in
+acconfig.h
+acinclude.m4
+aclocal.m4
alpha-dis.c
-alpha-opc.h
+alpha-opc.c
+arc-dis.c
+arc-opc.c
arm-dis.c
arm-opc.h
a29k-dis.c
+cgen.sh
+cgen-asm.c
+cgen-asm.in
+cgen-dis.c
+cgen-dis.in
+cgen-opc.c
+config.in
+configure
configure.bat
configure.in
+d10v-dis.c
+d10v-opc.c
+dep-in.sed
dis-buf.c
disassemble.c
h8300-dis.c
hppa-dis.c
i386-dis.c
i960-dis.c
+m32r-asm.c
+m32r-dis.c
+m32r-opc.c
+m32r-opc.h
m68k-dis.c
+m68k-opc.c
m88k-dis.c
+makefile.vms
mips-dis.c
mips-opc.c
+mips16-opc.c
+m10200-dis.c
+m10200-opc.c
+m10300-dis.c
+m10300-opc.c
+mpw-config.in
+mpw-make.sed
ns32k-dis.c
ppc-dis.c
ppc-opc.c
sh-dis.c
sparc-dis.c
sparc-opc.c
+stamp-h.in
+sysdep.h
+w65-dis.c
+w65-opc.h
+v850-opc.c
+v850-dis.c
z8k-dis.c
z8k-opc.h
z8kgen.c
Do-last:
-i960xl_files="ChangeLog i960-dis.c"
-if ( echo $* | grep keep\-i960xl > /dev/null ) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping i960xl stuff in $i960xl_files.
- fi
+cygnus_files="ChangeLog Makefile.am Makefile.in configure.in configure"
+if ( echo $* | grep keep\-cygnus > /dev/null ) ; then
+ for i in $cygnus_files ; do
+ if test ! -d $i && (grep sanitize-cygnus $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping cygnus stuff in $i
+ fi
+ fi
+ done
else
- if [ -n "${verbose}" ]; then
- echo -n Cleaning i960xl in `pwd`:
- fi
- for f in $i960xl_files ; do
- if [ -n "${verbose}" ] ; then
- echo -n " " $f
+ for i in $cygnus_files ; do
+ if test ! -d $i && (grep sanitize-cygnus $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"cygnus\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-cygnus/,/end-\sanitize\-cygnus/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+d30v_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c"
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+ for i in $d30v_files ; do
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping d30v stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $d30v_files ; do
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"d30v\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+v850e_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c v850-opc.c v850-dis.c"
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
+ for i in $v850e_files ; do
+ if test -f $i && (grep sanitize-v850e $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping v850e stuff in $i
+ fi
fi
- sed -e '/start\-sanitize\-i960xl/,/end\-sanitize\-i960xl/d' -e '/ xl /d' < $f > new
- if [ -n "${safe}" ] ; then
- mv $f .Recover
+ done
+else
+ for i in $v850e_files ; do
+ if test -f $i && (grep sanitize-v850e $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"v850e\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-v850e/,/end\-sanitize\-v850e/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
fi
- mv new $f
done
fi
-sh3_files="ChangeLog sh3-opc.h"
-if ( echo $* | grep keep\-sh3 > /dev/null ) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping sh3 stuff in $sh3_files.
- fi
+r5900_files="ChangeLog mips-opc.c"
+if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
+ for i in $r5900_files ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping r5900 stuff in $i
+ fi
+ fi
+ done
else
- if [ -n "${verbose}" ]; then
- echo -n Cleaning sh3 in `pwd`:
- fi
- for f in $sh3_files ; do
- if [ -n "${verbose}" ] ; then
- echo -n " " $f
+ for i in $r5900_files ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"r5900\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+vr5400_files="ChangeLog mips-opc.c mips-dis.c"
+if ( echo $* | grep keep\-vr5400 > /dev/null ) ; then
+ for i in $vr5400_files ; do
+ if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping vr5400 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $vr5400_files ; do
+ if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"vr5400\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-vr5400/,/end-\sanitize\-vr5400/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
fi
- sed -e '/start\-sanitize\-sh3/,/end\-sanitize\-sh3/d' -e '/ xl /d' < $f > new
- if [ -n "${safe}" ] ; then
- mv $f .Recover
+ done
+fi
+
+tx19_files="ChangeLog mips16-opc.c"
+if ( echo $* | grep keep\-tx19 > /dev/null ) ; then
+ for i in $tx19_files ; do
+ if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tx19 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $tx19_files ; do
+ if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tx19\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tx19/,/end-\sanitize\-tx19/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+tx49_files="ChangeLog mips-opc.c"
+if ( echo $* | grep keep\-tx49 > /dev/null ) ; then
+ for i in $tx49_files ; do
+ if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tx49 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $tx49_files ; do
+ if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tx49\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tx49/,/end-\sanitize\-tx49/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+tic80_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c"
+if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
+ for i in $tic80_files ; do
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tic80 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $tic80_files ; do
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tic80\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tic80/,/end-\sanitize\-tic80/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+coldfire_files="ChangeLog m68k-opc.c"
+if ( echo $* | grep keep\-coldfire > /dev/null ) ; then
+ for i in $coldfire_files ; do
+ if test ! -d $i && (grep sanitize-coldfire $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping coldfire stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $coldfire_files ; do
+ if test ! -d $i && (grep sanitize-coldfire $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"coldfire\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-coldfire/,/end-\sanitize\-coldfire/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
fi
- mv new $f
done
fi
+if [ -n "${verbose}" ] ; then
+ echo Processing \"sh4\"...
+fi
+
+sh4_files="ChangeLog sh-opc.h sh-dis.c"
+if ( echo $* | grep keep\-sh4 > /dev/null ) ; then
+ for i in $sh4_files ; do
+ if test ! -d $i && (grep sanitize-sh4 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping sh4 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in $sh4_files ; do
+ if test ! -d $i && (grep sanitize-sh4 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"sh4\" from $i...
+ fi
+ cp $i new
+ sed -e '/start\-sanitize\-sh4/,/end-\sanitize\-sh4/d' -e 's/.*restore\-sanitize\-sh4//' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
-rce_files="configure.in"
-if ( echo $* | grep keep\-rce > /dev/null ) ; then
- for i in $rce_files ; do
- if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+sky_files="ChangeLog Makefile.in Makefile.am configure.in configure disassemble.c"
+if ( echo $* | grep keep\-sky > /dev/null ) ; then
+ for i in $sky_files ; do
+ if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping rce stuff in $i
+ echo Keeping sky stuff in $i
fi
fi
done
else
- for i in $rce_files ; do
- if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+ for i in $sky_files ; do
+ if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"rce\" from $i...
+ echo Removing traces of \"sky\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-rce/,/end-\sanitize\-rce/d' < $i > new
+ sed '/start\-sanitize\-sky/,/end-\sanitize\-sky/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
fi
done
-
# End of file.
projects / deliverable / binutils-gdb.git / blobdiff