+2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
+
+ * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
+ support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
+ shl-*-linux*.
+ * configure: Regenerate.
+
+2002-02-10 Daniel Jacobowitz <drow@mvista.com>
+
+ * cgen-dis.c: Add prototypes for count_decodable_bits
+ and add_insn_to_hash_chain.
+
+2002-02-08 Alexandre Oliva <aoliva@redhat.com>
+
+ * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
+ * configure: Rebuilt.
+
+2002-02-08 Ivan Guzvinec <ivang@opencores.org>
+
+ * or32-opc.c: Fix compile time warning messages.
+ * or32-dis.c: Fix compile time warning messages.
+
+2002-02-08 Alexandre Oliva <aoliva@redhat.com>
+
+ Contribute sh64-elf.
+ 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
+ * sh64-opc.c: Regenerate.
+ 2001-03-13 DJ Delorie <dj@redhat.com>
+ * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
+ purpose is more obvious.
+ * sh64-opc.c (shmedia_table): Ditto.
+ * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
+ (print_insn_shmedia): Ditto.
+ 2001-03-12 DJ Delorie <dj@redhat.com>
+ * sh64-opc.c: Adjust comments to reflect reality: replace bits
+ 3:0 with zeros (not "reserved"), replace "rrrrrr" with
+ "gggggg" for two-operand floating point opcodes. Remove
+ "fsina".
+ 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
+ * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
+ Correct printing of .byte:s. Return number of printed bytes or
+ -1; never 0.
+ (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
+ to next four-byte-alignment if insn or data is not aligned.
+ 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
+ * sh64-dis.c: Update comments and fix comment formatting.
+ (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
+ Abort instead of setting length to 0.
+ (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
+ crange_bsearch_cmpl, sh64_get_contents_type,
+ sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
+ 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
+ * sh64-opc.c: Remove #if 0:d entries for instructions not found in
+ SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
+ 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
+ * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
+ address with same prefix as SHcompact.
+ In the disassembler, use a .cranges section for linked executables.
+ * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
+ and update for using structure in info->private_data.
+ (struct sh64_disassemble_info): New.
+ (is_shmedia_p): Delete.
+ (crange_qsort_cmpb): New function.
+ (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
+ (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
+ (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
+ (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
+ (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
+ pair. Display addresses for linked executables only.
+ (print_insn_sh64x_media): Initialize info->private_data by calling
+ init_sh64_disasm_info.
+ (print_insn_sh64x): Ditto. Find out type of contents by calling
+ sh64_contents_type_disasm. Display data regions using ".long" and
+ ".byte" similar to unrecognized opcodes.
+ 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
+ * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
+ information in section flags before considering symbols. Don't
+ assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
+ * configure.in (bfd_sh_arch): Check presence of sh64 insns by
+ matching $target $canon_targets instead of looking at the
+ now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
+ * configure: Regenerate.
+ 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
+ * sh64-opc.c (shmedia_creg_table): New.
+ * sh64-opc.h (shmedia_creg_info): New type.
+ (shmedia_creg_table): Declare.
+ * sh64-dis.c (creg_name): New function.
+ (print_insn_shmedia): Use it.
+ * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
+ bfd_mach_sh5 to print_insn_sh64 if big-endian and to
+ print_insn_sh64l if little-endian.
+ * sh64-dis.c (print_insn_shmedia): Make r unsigned.
+ (print_insn_sh64l): New.
+ (print_insn_sh64x): New.
+ (print_insn_sh64x_media): New.
+ (print_insn_sh64): Break out code to print_insn_sh64x and
+ print_insn_sh64x_media.
+ 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
+ * sh64-opc.h: New file
+ * sh64-opc.c: New file
+ * sh64-dis.c: New file
+ * Makefile.am: Add sh64 targets.
+ (HFILES): Add sh64-opc.h.
+ (CFILES): Add sh64-opc.c and sh64-dis.c.
+ (ALL_MACHINES): Add sh64 files.
+ * Makefile.in: Regenerate.
+ * configure.in: Add support for sh64 to bfd_sh_arch.
+ * configure: Regenerate.
+ * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
+ (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
+ print_insn_sh64.
+ * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
+ * po/POTFILES.in: Regenerate.
+ * po/opcodes.pot: Regenerate.
+
+2002-02-04 Frank Ch. Eigler <fche@redhat.com>
+
+ * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
+
+2002-02-04 Alexandre Oliva <aoliva@redhat.com>
+
+ * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
+
+2002-02-01 Alan Modra <amodra@bigpond.net.au>
+
+ * Makefile.am: Run "make dep-am"
+ * Makefile.in: Regenerate.
+
+2002-01-31 Ivan Guzvinec <ivang@opencores.org>
+
+ * or32-dis.c: New file.
+ * or32-opc.c: New file.
+ * configure.in: Add support for or32.
+ * configure: Regenerate.
+ * Makefile.am: Add support for or32.
+ * Makefile.in: Regenerate.
+ * disassemble.c: Add support for or32.
+ * po/POTFILES.in: Regenerate.
+ * po/opcodes.pot: Regenerate.
+
+2002-01-27 Daniel Jacobowitz <drow@mvista.com>
+
+ * configure: Regenerated.
+
+2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * po/fr.po: Updated version.
+
+2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * po/es.po: Updated version.
+
+2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * po/da.po: New version.
+
+2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * po/da.po: New file: Spanish translation.
+ * configure.in (ALL_LINGUAS): Add da.
+ * configure: Regenerate.
+
+2002-01-22 Graydon Hoare <graydon@redhat.com>
+
+ * fr30-asm.c: Regenerate.
+ * fr30-desc.c: Likewise.
+ * fr30-desc.h: Likewise.
+ * fr30-dis.c: Likewise.
+ * fr30-ibld.c: Likewise.
+ * fr30-opc.c: Likewise.
+ * fr30-opc.h: Likewise.
+ * m32r-asm.c: Likewise.
+ * m32r-desc.c: Likewise.
+ * m32r-desc.h: Likewise.
+ * m32r-dis.c: Likewise.
+ * m32r-ibld.c: Likewise.
+ * m32r-opc.c: Likewise.
+ * m32r-opc.h: Likewise.
+ * m32r-opinst.c: Likewise.
+ * openrisc-asm.c: Likewise.
+ * openrisc-desc.c: Likewise.
+ * openrisc-desc.h: Likewise.
+ * openrisc-dis.c: Likewise.
+ * openrisc-ibld.c: Likewise.
+ * openrisc-opc.c: Likewise.
+ * openrisc-opc.h: Likewise.
+ * xstormy16-desc.c: Likewise.
+
+2002-01-22 Richard Henderson <rth@redhat.com>
+
+ * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
+ comparison.
+
+2002-01-22 Alan Modra <amodra@bigpond.net.au>
+
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+ * opcodes/po/POTFILES.in: Regenerate.
+
+2002-01-19 Richard Earnshaw <rearnsha@arm.com>
+
+ * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
+ * arm-dis.c (print_insn_arm): Don't handle 'h' case.
+
+2002-01-18 Keith Walker <keith.walker@arm.com>
+
+ * arm-opc.h (arm_opcodes): Add bxj instruction.
+
+2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * po/opcodes.pot: Regenerate.
+ * po/fr.po: Regenerate.
+ * po/sv.po: Regenerate.
+ * po/tr.po: Regenerate.
+
+2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * po/tr.po: Import new version.
+
+2002-01-15 Richard Earnshaw <rearnsha@arm.com>
+
+ * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
+ * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
+ VFP bitfields.
+
+2002-01-10 matthew green <mrg@redhat.com>
+
+ * xstormy16-asm.c: Regenerate.
+ * xstormy16-desc.c: Likewise.
+ * xstormy16-desc.h: Likewise.
+ * xstormy16-dis.c: Likewise.
+ * xstormy16-opc.c: Likewise.
+ * xstormy16-opc.h: Likewise.
+
+2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * po/es.po: New file: Spanish translation.
+ * configure.in (ALL_LINGUAS): Add es.
+ * configure: Regenerate.
+
+2001-12-31 Jeffrey A Law (law@redhat.com)
+
+ * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
+ 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
+ Always emit a space after 'H'.
+
+2001-12-18 matthew green <mrg@redhat.com>
+
+ * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
+
+2001-12-17 Richard Henderson <rth@redhat.com>
+
+ * alpha-opc.c (unop): Encode with RB as $sp.
+
+2001-12-07 Geoffrey Keating <geoffk@redhat.com>
+
+ * Makefile.am: Add support for xstormy16.
+ * Makefile.in: Regenerate.
+ * configure.in: Add support for xstormy16.
+ * configure: Regenerate.
+ * disassemble.c: Add support for xstormy16.
+ * xstormy16-asm.c: New generated file.
+ * xstormy16-desc.c: New generated file.
+ * xstormy16-desc.h: New generated file.
+ * xstormy16-dis.c: New generated file.
+ * xstormy16-ibld.c: New generated file.
+ * xstormy16-opc.c: New generated file.
+ * xstormy16-opc.h: New generated file.
+
+2001-12-06 Richard Henderson <rth@redhat.com>
+
+ * alpha-opc.c (alpha_opcodes): Add wh64en.
+
+2001-12-04 Alexandre Oliva <aoliva@redhat.com>
+
+ * d10v-opc.c (d10v_predefined_registers): Remove warnings
+ introduced in Nov 29's patch.
+
+ * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
+ unmatched register.
+
+ * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
+ predefined value.
+
+ * d10v-opc.c (RSRC_NOSP): New macro.
+ (d10v_operands): Add it.
+ (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
+
+2001-11-29 Alexandre Oliva <aoliva@redhat.com>
+
+ * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
+ (RSRC_SP): New macro.
+ (d10v_operands): Add it.
+ (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
+
+2001-11-23 Lars Brinkhoff <lars@nocrew.org>
+
+ * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
+ Also, break out of the loop as soon as an instruction has been
+ printed.
+
+2001-11-17 matthew green <mrg@redhat.com>
+
+ * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
+
+2001-11-15 Alan Modra <amodra@bigpond.net.au>
+
+ * po/POTFILES.in: Regenerate.
+
+ * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
+ (insert_bat, extract_bat, insert_bba, extract_bba,
+ insert_bd, extract_bd, insert_bdm, extract_bdm,
+ insert_bdp, extract_bdp, valid_bo,
+ insert_bo, extract_bo, insert_boe, extract_boe,
+ insert_ds, extract_ds, insert_de, extract_de,
+ insert_des, extract_des, insert_li, extract_li,
+ insert_mbe, extract_mbe, insert_mb6, extract_mb6,
+ insert_nb, extract_nb, insert_nsi, extract_nsi,
+ insert_ral, insert_ram, insert_ras,
+ insert_rbs, extract_rbs, insert_sh6, extract_sh6,
+ insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
+ (extract_bd, extract_bdm, extract_bdp,
+ extract_ds, extract_des,
+ extract_li, extract_nsi): Implement sign extension without conditional.
+ (insert_bdm, extract_bdm,
+ insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
+ (extract_bdm, extract_bdp): Correct 32 bit validation.
+ (AT1_MASK, AT2_MASK): Define.
+ (BBOAT_MASK): Define.
+ (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
+ (BOFM64, BOFP64, BOTM64, BOTP64): Define.
+ (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
+ (PPCCOM32, PPCCOM64): Define.
+ (powerpc_opcodes): Modify existing 32 bit insns with branch hints
+ and add new patterns to implement 64 bit branches with hints. Move
+ booke instructions so they match before ppc64.
+
+ * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
+ 64 bit default targets, and parse "32" and "64" in options.
+ Formatting fixes.
+ (print_insn_powerpc): Pass dialect to operand->extract.
+
+2001-11-14 Dave Brolley <brolley@redhat.com>
+
+ * cgen-dis.c (count_decodable_bits): New function.
+ (add_insn_to_hash_chain): New function.
+ (hash_insn_array): Call add_insn_to_hash_chain.
+ (hash_insn_list): Call add_insn_to_hash_chain.
+ * m32r-dis.c: Regenerated.
+ * fr30-dis.c: Regenerated.
+
+2001-11-14 Andreas Jaeger <aj@suse.de>
+
+ * i386-dis.c (print_insn): Use x86-64 as option.
+
+2001-11-14 Alan Modra <amodra@bigpond.net.au>
+
+ * disassemble.c (disassembler): Call print_insn_i386.
+ * i386-dis.c (SUFFIX_ALWAYS): Define.
+ (struct dis_private): Add orig_sizeflag.
+ (print_insn_i386): Make it a wrapper, calling..
+ (print_insn): ..The old body of print_insn_i386. Avoid longjmp
+ warning without using volatile by moving orig_sizeflag to priv,
+ and removing inbuf. Parse disassembler_options.
+ (print_insn_i386_att, print_insn_i386_intel): Move initialisation
+ code to print_insn.
+ (putop): Remove #ifdef SUFFIX_ALWAYS.
+
+2001-11-11 Timothy Wall <twall@alum.mit.edu>
+
+ * tic54x-dis.c: Use revised opcode structure. Export opcode
+ template lookup.
+ (has_lkaddr): Don't forget about Lmem insns.
+ * tic54x-opc.c: Add emulation trap. Parallel table now uses
+ standard opcode templates.
+
+2001-11-13 Zack Weinberg <zack@codesourcery.com>
+
+ * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
+ to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
+ category instead of Ew.
+
+2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
+
+ * m68k-opc.c: Fix definitions of wddata[bwl].
+
+2001-11-09 Richard Sandiford <rsandifo@redhat.com>
+
+ * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
+ fit in the buffer, try to match the empty keyword.
+
+2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * cgen-ibld.in (extract_1): Fix badly placed #if 0.
+ * fr30-ibld.c: Regenerate.
+ * m32r-ibld.c: Regenerate.
+ * openrisc-ibld.c: Regenerate.
+
+2001-11-04 Chris Demetriou <cgd@broadcom.com>
+
+ * mips-dis.c (print_insn_mips): Remove spaces at end of line.
+
+2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
+ * configure: Regernate.
+ * po/fr.po: New file.
+ * po/sv.po: New file.
+ * po/tr.po: New file.
+
+2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
+
+ * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
+ constant as source.
+
+2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
+
+ * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
+ dependencies.
+ * Makefile.in: Regenerate.
+ * mmix-dis.c, mmix-opc.c: New files.
+
+2001-10-29 Kazu Hirata <kazu@hxi.com>
+
+ * d30v-dis.c: Fix a comment typo.
+
+2001-10-23 Chris Demetriou <cgd@broadcom.com>
+
+ * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
+ "bltzall" as writing GPR 31 (since they do).
+
+ * mips-dis.c (print_insn_arg): Calculate info->target
+ where appropriate.
+ (print_insn_mips): Fill in instruction info.
+ (print_mips16_insn_arg): Remove unneded variable 'val'.
+ Removed duplicated instruction target calculations,
+ calculate once and print that result. Use same idiom for
+ masking the jump segment bits as is used in print_insn_arg.
+
+2001-10-20 Alan Modra <amodra@bigpond.net.au>
+
+ * ppc-opc.c (CT): Make it an optional operand.
+
+2001-10-17 Chris Demetriou <cgd@broadcom.com>
+
+ * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
+ SB-1 binaries include instructions specific to the SB-1.
+ * mips-opc.c (SB1): New definition.
+ (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
+ "recip.ps", "rsqrt.ps", and "sqrt.ps".
+
+2001-10-17 matthew green <mrg@redhat.com>
+
+ * ppc-opc.c (STRM): New AltiVec operand.
+ (XDSS): New AltiVec instruction form.
+ (mtvscr): Correct operand list.
+ (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
+
+2001-10-17 Alan Modra <amodra@bigpond.net.au>
+
+ * po/POTFILES.in: Regenerate.
+
+2001-10-13 matthew green <mrg@redhat.com>
+
+ * ppc-opc.c (MO): New macro for MO field of mbar instruction.
+ (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
+ mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
+
+2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * cgen-ibld.in: Include safe-ctype.h in preference to
+ ctype.h.
+ * cgen-asm.in: Include safe-ctype.h in preference to
+ ctype.h. Fix formatting. Use ISSPACE instead of isspace and
+ TOLOWER instead of tolower.
+ (@arch@_cgen_build_insn_regex): Remove duplication of syntax
+ string elements in constructed regular expression.
+ * fr30-asm.c: Regenerate.
+ * fr30-desc.c: Regenerate.
+ * fr30-ibld.c: Regenerate.
+ * m32r-asm.c: Regenerate.
+ * m32r-desc.c: Regenerate.
+ * m32r-ibld.c: Regenerate.
+ * openrisc-asm.c: Regenerate.
+ * openrisc-desc.c: Regenerate.
+ * openrisc-ibld.c: Regenerate.
+ * po/opcodes.pot: Regenerate.
+
2001-10-12 matthew green <mrg@redhat.com>
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
DSP single data transfer instructions.
* sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
- instructions.
+ instructions.
2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>