+start-sanitize-v850
+Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_operands): D16 inserts at offset 16!
+
+ * v850-opc.c (two): Get order of words correct.
+
+ * v850-opc.c (v850_operands): I16 inserts at offset 16!
+
+ * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
+ register source and destination operands.
+ (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
+
+ * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
+ same thinko in "trap" opcode.
+
+ * v850-opc.c (v850_opcodes): Add initializer for size field
+ on all opcodes.
+
+ * v850-opc.c (v850_operands): D6 -> DS7. References changed.
+ Add D8 for 8-bit unsigned field in short load/store insns.
+ (IF4A, IF4D): These both need two registers.
+ (IF4C, IF4D): Define. Use 8-bit unsigned field.
+ (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
+ IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
+ for "ldsr" and "stsr".
+ * v850-opc.c (v850_operands): 3-bit immediate for bit insns
+ is unsigned.
+
+ * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
+ short store word (sst.w).
+
+Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * v850-opc.c (v850_operands): Added insert and extract fields,
+ pointers to functions that handle unusual operand encodings.
+
+Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_opcodes): Enable "trap".
+
+ * v850-opc.c (v850_opcodes): Fix order of displacement
+ and register for "set1", "clr1", "not1", and "tst1".
+
+Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_operands): Add "B3" support.
+ (v850_opcodes): Fix and enable "set1", "clr1", "not1"
+ and "tst1".
+
+ * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
+
+ * v850-opc.c: Close unterminated comment.
+
+Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
+
+ * v850-opc.c (v850_operands): Add flags field.
+ (v850_opcodes): add move opcodes.
+
+Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
+
+ * Makefile.in (ALL_MACHINES): Add v850-opc.o.
+ * configure: (bfd_v850v_arch) Add new case.
+ * configure.in: (bfd_v850_arch) Add new case.
+ * v850-opc.c: New file.
+
+end-sanitize-v850
+Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
+
+start-sanitize-d10v
+Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c: Add additional information to the opcode
+ table to help determinine which instructions can be done
+ in parallel.
+
+end-sanitize-d10v
+Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
+
+ * mpw-make.sed: Update editing of include pathnames to be
+ more general.
+
+Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
+
+ * arm-opc.h: Added "bx" instruction definition.
+
+Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
+
+ * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
+
+start-sanitize-d10v
+Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
+
+Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
+
+end-sanitize-d10v
+Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
+
+ * makefile.vms: Update for alpha-opc changes.
+
+Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * i386-dis.c (print_insn_i386): Actually return the correct value.
+ (ONE, OP_ONE): #ifdef out; not used.
+
+start-sanitize-d10v
+Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
+ Changed subi operand type to treat 0 as 16.
+
+end-sanitize-d10v
+Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
+ <rose@netcom.com>.
+
+Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
+
+ * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
+ memory transfer instructions. Add new format string entries %h and %s.
+ * arm-dis.c: (print_insn_arm): Provide decoding of the new
+ formats %h and %s.
+
+start-sanitize-d10v
+Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
+ (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
+
+end-sanitize-d10v
+Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * alpha-dis.c (print_insn_alpha_osf): Remove.
+ (print_insn_alpha_vms): Remove.
+ (print_insn_alpha): Make globally visible. Chose the register
+ names based on info->flavour.
+ * disassemble.c: Always return print_insn_alpha for the alpha.
+
+start-sanitize-d10v
+Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-dis.c (dis_long): Handle unknown opcodes.
+
+Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c: Changes to support signed and unsigned numbers.
+ All instructions with the same name that have long and short forms
+ now end in ".l" or ".s". Divs added.
+ * d10v-dis.c: Changes to support signed and unsigned numbers.
+
+Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-dis.c: Change all functions to use info->print_address_func.
+
+end-sanitize-d10v
+Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+
+ * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
+ move ccr/sr insns more strict so that the disassembler only
+ selects them when the addressing mode is data register.
+
+start-sanitize-d10v
+Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+ * d10v-opc.c (pre_defined_registers): Declare.
+ * d10v-dis.c (print_operand): Now uses pre_defined_registers
+ to pick a better name for the registers.
+
+end-sanitize-d10v
+Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
+ operands for fexpand and fpmerge. From Christian Kuehnke
+ <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
+
+Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
+
+ * alpha-dis.c (print_insn_alpha): No longer the user-visible
+ print routine. Take new regnames and cpumask arguments.
+ Kill the environment variable nonsense.
+ (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
+ (print_insn_alpha_vms): New function. Do VMS style regnames.
+ * disassemble.c (disassembler): Test bfd flavour to pick
+ between OSF and VMS routines. Default to OSF.
+
+Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Call AC_SUBST (INSTALL_SHLIB).
+ * configure: Rebuild.
+ * Makefile.in (install): Use @INSTALL_SHLIB@.
+
+start-sanitize-d10v
+ Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * configure: (bfd_d10v_arch) Add new case.
+ * configure.in: (bfd_d10v_arch) Add new case.
+ * d10v-dis.c: New file.
+ * d10v-opc.c: New file.
+ * disassemble.c (disassembler) Add entry for d10v.
+
+end-sanitize-d10v
+Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
+ to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
+
+Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
+
+ * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
+ distinguish between variants of the instruction set.
+ * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
+ distinguish between variants of the instruction set.
+
+Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
+
+ * i386-dis.c (print_insn_i8086): New routine to disassemble using
+ the 8086 instruction set.
+ * i386-dis.c: General cleanups. Make most things static. Add
+ prototypes. Get rid of static variables aflags and dflags. Pass
+ them as args (to almost everything).
+
+Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
+
+ * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
+
+ * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
+
+ * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
+ if the next arg is marked with SRC_IN_DST. Gross.
+
+ * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
+ we're looking for and find EXR.
+
+ * h8300-dis.c (bfd_h8_disassemble): We don't have a match
+ if we're looking for KBIT and we don't find it.
+
+ * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
+ for L_3 and L_2.
+
+ * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
+ 3bit immediate operands.
+
+Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * Released binutils 2.7.
+
+ * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
+ <kkaempf@progis.ac-net.de>.
+
+Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * alpha-opc.c: Correct second case of "mov" to use OPRL.
+
+Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
+
+ * sparc-dis.c (print_insn_sparclite): New routine to print
+ sparclite instructions.
+
+Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * m68k-opc.c (m68k_opcodes): Add coldfire support.
+
+Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
+ #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
+ to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
+
+Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
+
+ * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
+ Use autoconf-set values.
+ (docdir, oldincludedir): Removed.
+ * configure.in (AC_PREREQ): autoconf 2.5 or higher.
+
+Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
+
+ * alpha-opc.c: New file.
+ * alpha-opc.h: Remove.
+ * alpha-dis.c: Complete rewrite to use new opcode table.
+ * configure.in: For bfd_alpha_arch, use alpha-opc.o.
+ * configure: Rebuild with autoconf 2.10.
+ * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
+ (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
+ alpha-opc.h.
+ (alpha-opc.o): New target.
+
+Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
+ Set imm_added_to_rs1 even if the source and destination register
+ are not the same.
+
+ * sparc-opc.c: Add some two operand forms of the wr instruction.
+
+Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
+
+ * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
+ to just "mode".
+
+ * disassemble.c (disassembler): Handle H8/S.
+ * h8300-dis.c (print_insn_h8300s): New function for H8/S.
+
+Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * sparc-opc.c: Add beq/teq as aliases for be/te.
+
+ * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
+ <sergei@msil.sps.mot.com>.
+
+Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
+
+ * makefile.vms: New file.
+
+ * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
+
+Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
+ regardless of plen.
+
+Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * i386-dis.c (OP_OFF): Call append_prefix.
+
+Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppc-opc.c (instruction encoding macros): Add explicit casts to
+ unsigned long to silence a warning from the Solaris PowerPC
+ compiler.
+
+Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
+
+Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
+
+ * sparc-dis.c (X_IMM,X_SIMM): New macros.
+ (X_IMM13): Delete.
+ (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
+ * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
+ Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
+ cpush, cpusha, cpull sparclet insns.
+
+Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
+
+Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * sparc-opc.c: Set F_FBR on floating point branch instructions.
+ Set F_FLOAT on other floating point instructions.
+
+Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
+ registers.
+ (powerpc_opcodes): Add 860/821 specific SPRs.
+
+Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Permit --enable-shared to specify a list of
+ directories. Set and substitute BFD_PICLIST.
+ * configure: Rebuild.
+ * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
+ uses. Set to @BFD_PICLIST@.
+
+Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
+
+ * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
+ not "abs", which may be needed for the absolute in something
+ like btst #0,@10:8. Print L_3 immediates separately from other
+ immediates. Change ABSMOV reference to ABS8MEM.
+
+Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
+ (current_arch_mask): New static global.
+ (compute_arch_mask): New static function.
+ (print_insn_sparc): Delete sparc_v9_p. New static local
+ current_mach. Resort opcode table if current_mach changes.
+ Generalize "insn not supported" test.
+ (compare_opcodes): Prefer supported opcodes to nonsupported ones.
+ Delete test for v9/!v9.
+ * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
+ (v6notlet): Define.
+ (brfc): Split into CBR and FBR for coprocessor/fp branches.
+ (brfcx): Renamed to FBRX.
+ (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
+ coprocessor mnemonics are not supported on the sparclet).
+ (condf): Renamed to CONDF.
+ (SLCBCC2): Delete F_ALIAS flag.
+
+Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-opc.c (sparc_opcodes): rd must be 0 for
+ mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
+
+Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (config.status): Depend upon BFD VERSION file, so
+ that the shared library version number is set correctly.
+
+Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
+ Miles Bader <miles@gnu.ai.mit.edu>.
+ * configure: Rebuild.
+
+Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
+
+ * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
+ malloc.
+
+Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Rebuild with autoconf 2.8.
+
+Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
+
+ * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
+ * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
+
+Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Don't set SHLIB or SHLINK to an empty string,
+ since they appear as targets in Makefile.in.
+ * configure: Rebuild.
+
+Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
+
+ * mpw-make.sed: Edit out shared library support bits.
+
+Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
+
+ * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
+ (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
+ (sparc_opcodes): Add sparclet insns.
+ (sparclet_cpreg_table): New static local.
+ (sparc_{encode,decode}_sparclet_cpreg): New functions.
+ * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
+
+Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
+
+ * i386-dis.c (index16): New static variable.
+ (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
+ other way around.
+ (OP_indirE): Return result of OP_E.
+ (OP_E): Check for 16 bit addressing mode, and disassemble
+ correctly. Optimised 32 bit case a little. Don't print
+ "(base,index,scale)" when sib specifies only an offset.
+
+Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Set and substitute SHLIB_DEP.
+ * configure: Rebuild.
+ * Makefile.in (SHLIB_DEP): New variable.
+ (LIBIBERTY_LISTS, BFD_LIST): New variables.
+ (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
+ COMMON_SHLIB, add them to piclist with appropriate modifications.
+ ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
+ here: just use piclist.
+
+Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
+
+ * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
+ (print_insn_sparc): Rewrite v9/not-v9 tests.
+ (compare_opcodes): Likewise.
+ * sparc-opc.c (MASK_<ARCH>): Define.
+ (v6,v7,v8,sparclite,v9,v9a): Redefine.
+ (sparclet,v6notv9): Define.
+ (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
+ (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
+
+Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Call AC_PROG_CC before configure.host.
+ * configure: Rebuild.
+
+ * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
+
+Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
+
+ * i386-dis.c (onebyte_has_modrm): New static array.
+ (twobyte_has_modrm): New static array.
+ (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
+
+Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
+ $(SHLINK).
+
+Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppc-opc.c (PPC): Undef, so default defination on Windows NT
+ doesn't conflict.
+
+Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
+ m68010up, not just m68020up | cpu32.
+
+ * Makefile.in (SONAME): New variable.
+ ($(SHLINK)): Make a link to the transformed name, as well.
+ (stamp-tshlink): New target.
+ (install): Skip stamp-tshlink during install.
+
+Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Call AC_ARG_PROGRAM.
+ * configure: Rebuild.
+ * Makefile.in (program_transform_name): New variable.
+ (install): Transform library name before installing it.
+
+Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * i960-dis.c (mem): Add HX dcinva instruction.
+
+ Support for building as a shared library, based on patches from
+ Alan Modra <alan@spri.levels.unisa.edu.au>:
+ * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
+ New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
+ SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
+ * configure: Rebuild.
+ * Makefile.in (ALLLIBS): New variable.
+ (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
+ (COMMON_SHLIB, SHLINK): New variables.
+ (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
+ (STAGESTUFF): Remove variable.
+ (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
+ (stamp-piclist, piclist): New targets.
+ ($(SHLIB), $(SHLINK)): New targets.
+ ($(OFILES)): Depend upon stamp-picdir.
+ (disassemble.o): Build twice if PICFLAG is set.
+ (MOSTLYCLEAN): Add pic/*.o.
+ (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
+ (distclean): Remove pic and stamp-picdir.
+ (install): Install shared libraries.
+ (stamp-picdir): New target.
+
+Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
+
+ * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
+ Print unknown instruction as "unknown", rather than in hex.
+
+Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
+
+Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
+
+ * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
+
+Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
+ when necessary. From Ulrich Drepper
+ <drepper@myware.rz.uni-karlsruhe.de>.
+
+Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
+
+ * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
+ sparc_num_opcodes. Update architecture enum values.
+ * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
+ (sparc_opcode_lookup_arch): New function.
+ (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
+ (sparc_opcodes): Add v9a shutdown insn.
+
+Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
+
+ * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
+ If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
+ architecture.
+ (print_insn_sparc64): Deleted.
+ * disassemble.c (disassembler, case bfd_arch_sparc): Always use
+ print_insn_sparc.
+
+ * sparc-opc.c (architecture_pname): Add v9a.
+
+Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
+
+ * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
+ incorrectly defined as 0x16 when it should be 0x15.
+ (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
+ (alpha_insn_set): added cvtst and cvttq float ops. Also added
+ excb (exception barrier) which is defined in the Alpha
+ Architecture Handbook version 2.
+ * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
+ OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
+ disassembled as or, for example.
+
+Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
+ (_print_insn_mips): Change i from int to unsigned int.
+
Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
* ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
* mips-opc.c: Change unaligned loads and stores with "t,A"
operands to use "t,A(b)".
-start-sanitize-sh3e
Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-dis.c (print_insn_shx): Add F_FR0 support.
-end-sanitize-sh3e
Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
* configure.in: Substitute HDEFINES.
* configure: Rebuild.
-start-sanitize-sh3e
Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h (sh_arg_type): Add F_FR0.
(sh_table, case fmac): Add F_FR0 as first argument.
-end-sanitize-sh3e
Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h (sh_opcode_info): Increase arg array size to 4.
Use them rather than looking through target Makefile fragments.
* configure: Rebuild.
-start-sanitize-sh3e
Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
-end-sanitize-sh3e
Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
* sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
(sparc_{encode,decode}_prefetch): New functions.
* sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
-start-sanitize-sh3e
Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h: Add blank lines to improve readabililty of sh3e
instructions.
-end-sanitize-sh3e
Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-dis.c: Correct comment on first line of file.
and likewise for the size variants. Add dbhs as an alias for
dbcc.
-start-sanitize-sh3e
Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
* sh-opc.h (FP sts instructions): Update to match reality.
-end-sanitize-sh3e
Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
* m68k-dis.c: (fpcr_names): Add % before all register names.
* m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
for jsr.
-start-sanitize-sh3e
Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
* sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
* sh-opc.h (sh_arg_type): Add new operand types.
(sh_table): Add new opcodes from SH3E Floating Point ISA.
-end-sanitize-sh3e
Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
* Makefile.in (distclean): Remove generated file config.h.
sparse_tabent.
(ea): Local static array scale_tab now const.
- start-sanitize-i960xl
- * i960-dis.c (reg): Added i960XL instructions to reg_init table.
+ * i960-dis.c (reg): Added i960JX instructions to reg_init table.
(REG_MAX): Updated.
- end-sanitize-i960xl
Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
projects / deliverable / binutils-gdb.git / blobdiff