+1999-01-27 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-opc.h,fr30-opc.c: Rebuild.
+ * i960c-opc.h,i960c-opc.c: Rebuild.
+ * m32r-opc.c: Rebuild.
+
+Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
+
+ * hppa-dis.c: revert HP merge changes until HP gives us
+ an updated file.
+
+1999-01-19 Nick Clifton <nickc@cygnus.com>
+
+ * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
+ offsets as well as symbloic address.
+
+Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
+
+ * hppa-dis.c: fix comments and some indentation.
+
+1999-01-12 Doug Evans <devans@casey.cygnus.com>
+
+start-sanitize-cygnus
+ * Makefile.am (run-cgen): Pass options to cgen.
+ (stamp-m32r): Build operand instance table.
+ (stamp-fr30,stamp-i960c): Don't build the table.
+ * Makefile.in: Regenerate.
+ * cgen.sh: New arg `options'. Pass to cgen.
+end-sanitize-cygnus
+ * fr30-opc.c,i960c-opc.c: Regenerate.
+
+1999-01-11 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-opc.c: Regenerate.
+
1999-01-06 Doug Evans <devans@casey.cygnus.com>
* m32r-dis.c: Regenerate.
* cgen-asm.in (insert_normal): Use CGEN_BOOL_ATTR.
* cgen-asm.in (extract_normal): Ditto.
end-sanitize-cygnus
-start-sanitize-fr30
* fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
-end-sanitize-fr30
* i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
* m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
* mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
-start-sanitize-fr30
Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
* fr30-opc.c: Regenerated.
-end-sanitize-fr30
start-sanitize-vr4xxx
1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
* mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
end-sanitize-vr4xxx
-start-sanitize-fr30
1998-12-15 Dave Brolley <brolley@cygnus.com>
* fr30-opc.c,fr30-opc.h: Regenerated.
* fr30-opc.c,fr30-opc.h: Regenerated.
-end-sanitize-fr30
start-sanitize-vr4xxx
1998-12-13 Gavin Romig-Koch <gavin@cygnus.com>
* mips-opc.c: Add vr4121.
end-sanitize-vr4xxx
-start-sanitize-fr30
Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
* fr30-opc.c,fr30-opc.h: Regenerated.
-end-sanitize-fr30
Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-opc.c: Regenerate.
* dis-buf.c (generic_strcat_address): reformat to GNU coding
conventions. change sprintf call to an sprintf_vma call.
-start-sanitize-fr30
Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
* fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
-end-sanitize-fr30
Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
The following changes were made by
* i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
* i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
-start-sanitize-fr30
Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
* fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
-end-sanitize-fr30
Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
* mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
* ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
-start-sanitize-fr30
Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
* fr30-opc.c: Regenerate.
* fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
-end-sanitize-fr30
1998-11-30 Doug Evans <devans@casey.cygnus.com>
* cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
* cgen-opc.in (FLD): Define.
end-sanitize-cygnus
* m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-fr30
* fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
-end-sanitize-fr30
start-sanitize-cygnus
Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
* Makefile.in: Rebuild.
end-sanitize-cygnus
-start-sanitize-fr30
Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
* fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
* fr30-dis.c: Regenerated.
* fr30-asm.c: Regenerated.
-end-sanitize-fr30
Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
* mips-opc.c (sync.p,sync.l): Swap insn values.
-start-sanitize-fr30
1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
* fr30-opc.c: Regenerate.
* fr30-opc.c: Regenerated.
* fr30-opc.h: Regenerated.
-end-sanitize-fr30
1998-11-18 Doug Evans <devans@casey.cygnus.com>
start-sanitize-cygnus
(@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
end-sanitize-cygnus
* m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
-start-sanitize-fr30
* fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
-end-sanitize-fr30
-start-sanitize-fr30
Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
* fr30-opc.c: Regenerated.
* disassemble.c (disassembler): Add support for FR30 target.
-end-sanitize-fr30
Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
start-sanitize-cygnus
CGEN_OPERAND_SEM_ONLY.
end-sanitize-cygnus
* m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
-start-sanitize-fr30
* fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
* po/POTFILES.in: Regenerate.
* fr30-opc.c: Regenerate.
* fr30-opc.h: Regenerate.
-end-sanitize-fr30
+
Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-asm.c: Regenerate.
-start-sanitize-fr30
Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
* configure.in: Added case for bfd_fr30_arch.
* po/POTFILES.in: Regenerated
* po/opcodes.pot: Regenerated
-end-sanitize-fr30
start-sanitize-m32rx
Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
end-sanitize-cygnus
* m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-am33
+start-sanitize-cygnus
Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Allow autoincrement stores using the same register
* m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
-end-sanitize-am33
+end-sanitize-cygnus
Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
* m32r-opc.h,m32r-opc.c: Regenerate.
-start-sanitize-am33
+start-sanitize-cygnus
Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
-end-sanitize-am33
+end-sanitize-cygnus
Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* i386-dis.c (OP_3DNowSuffix): New static function.
* m10300-opc.c: Add entries for "no_match_operands" field in
the opcode table.
-start-sanitize-am33
+start-sanitize-cygnus
Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
* m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
operand.
-end-sanitize-am33
+end-sanitize-cygnus
Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
-start-sanitize-am33
+start-sanitize-cygnus
Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Add DSP autoincrement memory loads/stores.
* m10300-opc.c: Add autoincrement memory loads/stores.
-end-sanitize-am33
+end-sanitize-cygnus
start-sanitize-r5900
Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
end-sanitize-cygnus
* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-am33
+start-sanitize-cygnus
Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Fix load to sp and store from sp for the am33.
* m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
"mulu".
-end-sanitize-am33
+end-sanitize-cygnus
start-sanitize-r5900
Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
(OP_J): Remove unnecessary subtraction when 16-bit displacement
will be masked later.
-start-sanitize-am33
+start-sanitize-cygnus
Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
* m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
from raw register #s to symbolic names to make debugging easier.
-end-sanitize-am33
+end-sanitize-cygnus
Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
* m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
* configure: Regenerate.
end-sanitize-cygnus
-start-sanitize-am33
+start-sanitize-cygnus
Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
accidentally match a mn10300 instruction when we really
wanted an am33 instruction.
-end-sanitize-am33
+end-sanitize-cygnus
Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
* m10300-dis.c: Only recognize instructions from the currently
the DVP_OPERAND_RELOC_11_S4 relocation.
end-sanitize-sky
-start-sanitize-am33
+start-sanitize-cygnus
Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
* m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
"macbu" instructions. Fix typos in a couple DSP instructions too.
-end-sanitize-am33
+end-sanitize-cygnus
Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
* m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
be used as immediate values.
end-sanitize-sky
-start-sanitize-am33
+start-sanitize-cygnus
Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Support 4 byte DSP instructions.
-end-sanitize-am33
+end-sanitize-cygnus
Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
* mips-dis.c (_print_insn_mips): Fix argument interchange typo.
-start-sanitize-am33
+start-sanitize-cygnus
Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Support 6 and 7 byte am33 instructions.
-end-sanitize-am33
+end-sanitize-cygnus
Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
* m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
-start-sanitize-am33
+start-sanitize-cygnus
Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Support for 3 byte and 4 byte extended instructions
found on the mn10300.
-end-sanitize-am33
+end-sanitize-cygnus
1998-06-18 Ulrich Drepper <drepper@cygnus.com>
* i386-dis.c: Add support for fxsave, fxrstor, sysenter and
Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
-start-sanitize-am33
+start-sanitize-cygnus
* m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
operands for the am33.
(mn10300_opcodes): Add new instructions from the am33.
-end-sanitize-am33
+end-sanitize-cygnus
* m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>