+1999-01-27 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-opc.h,fr30-opc.c: Rebuild.
+ * i960c-opc.h,i960c-opc.c: Rebuild.
+ * m32r-opc.c: Rebuild.
+
+Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
+
+ * hppa-dis.c: revert HP merge changes until HP gives us
+ an updated file.
+
+1999-01-19 Nick Clifton <nickc@cygnus.com>
+
+ * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
+ offsets as well as symbloic address.
+
+Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
+
+ * hppa-dis.c: fix comments and some indentation.
+
+1999-01-12 Doug Evans <devans@casey.cygnus.com>
+
+start-sanitize-cygnus
+ * Makefile.am (run-cgen): Pass options to cgen.
+ (stamp-m32r): Build operand instance table.
+ (stamp-fr30,stamp-i960c): Don't build the table.
+ * Makefile.in: Regenerate.
+ * cgen.sh: New arg `options'. Pass to cgen.
+end-sanitize-cygnus
+ * fr30-opc.c,i960c-opc.c: Regenerate.
+
+1999-01-11 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-opc.c: Regenerate.
+
+1999-01-06 Doug Evans <devans@casey.cygnus.com>
+
+ * m32r-dis.c: Regenerate.
+
+start-sanitize-r5900
+1999-01-06 Frank Ch. Eigler <fche@cygnus.com>
+
+ * mips-opc.c (div1): Add three-operand pattern, just like "div".
+ (divu1): Ditto for "divu".
+
+end-sanitize-r5900
+1999-01-05 Doug Evans <devans@casey.cygnus.com>
+
+start-sanitize-cygnus
+ * cgen-asm.in (insert_normal): Use CGEN_BOOL_ATTR.
+ * cgen-asm.in (extract_normal): Ditto.
+end-sanitize-cygnus
+ * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
+ * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
+ * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
+
+1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * configure.in: Require autoconf 2.12.1 or higher.
+
+1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
+
+ * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
+
+Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+
+start-sanitize-vr4xxx
+1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
+
+ * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
+
+end-sanitize-vr4xxx
+1998-12-15 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c,fr30-opc.h: Regenerated.
+
+1998-12-14 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c,fr30-opc.h: Regenerated.
+
+start-sanitize-vr4xxx
+1998-12-13 Gavin Romig-Koch <gavin@cygnus.com>
+
+ * mips-dis.c (set_mips_isa_type): Add bfd_mach_mips4121.
+ (_print_insn_mips): Same.
+ * mips-opc.c: Add vr4121.
+
+end-sanitize-vr4xxx
+Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c,fr30-opc.h: Regenerated.
+
+Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * m32r-opc.c: Regenerate.
+
+start-sanitize-sky
+Wed Dec 9 14:57:23 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * mips-opc.c (mips_builtin_opcodes): Update vmtir syntax.
+ * dvp-opc.c (vu_lower_opcodes): Update mtir entry.
+ (extract_ffstreg): Fix calculation of reg part of returned value.
+
+ Thu Nov 19 16:38:16 EST 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * mips-opc.c (sync*): Flag these instructions with INSN_SYNC.
+
+ Wed Jul 29 09:41:19 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * dvp-opc.c (vu_lower_opcodes): Allow ISW, ISWR, MFIR instructions
+ to take multiple destination (xyzw) flags.
+
+ Thu Jul 23 18:26:49 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * dvp-opc.c (vu_operands): Add UW operand type to force ".w" suffix
+ on ft operand of CLIP.
+ (insert_w): New function for same.
+ (vu_opcodes): Use "broadcast" style argument list for two-operand
+ CLIP insn. Call UW constraint above.
+
+ Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
+
+ * dvp-dis.c (print_insn): Disassemble DVP_OPERAND_RELOC_11_S4 as
+ base 10.
+
+end-sanitize-sky
+Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
+
+ * dis-buf.c (generic_strcat_address): reformat to GNU coding
+ conventions. change sprintf call to an sprintf_vma call.
+
+Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
+
+Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
+
+ The following changes were made by
+ Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
+ David Taylor <taylor@texas.cygnus.com>, and
+ Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
+ merge in changes by HP; HP did not create ChangeLog entries.
+
+ * dis-buf.c (generic_strcat_address): new function.
+
+ * hppa-dis.c: Changes to improve hppa disassembly.
+ Changed formatting in : reg_names, fp_reg_names,control_reg,
+ New variables : sign_extension_names, deposit_names, conversion_names
+ float_test_names, compare_cond_names_double, add_cond_names_double,
+ logical_cond_names_double, unit_cond_names_double,
+ branch_push_pop_names, saturation_names, shift_names, mix_names,
+ New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
+ Move some definitions to libhppa.h: GET_FIELD, GET_BIT
+ (fput_const): renamed as fput_hex_const
+ (print_insn_hppa):
+ - use the macros fputs_filtered and
+ fput_decimal_const whenever possible; calls to sign_extend require
+ 2 params -- add a missing second param of 0.
+ - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
+ architecture version number of current machine. HP folks are
+ trying to handle situation where the target program was compiled
+ for PA 1.x (32-bit), but is running on a PA 2.0 machine and
+ visa versa.
+ - added new cases : 'g', 'B', 'm'
+ - added cases specifically for PA 2.0
+ - changed the following cases : '"', 'n', 'N', 'p', 'Z',
+ - calls to fput_const become calls to fput_hex_const
+
+1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
+
+ * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
+ (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
+start-sanitize-cygnus
+ (CLEANFILES): Add stamp-i960.
+ (I960_DEPS): Define.
+ (i960c-opc.h, i960c-opc.c, i960c-asm.c, i960c-dis.c, stamp-i960):
+ New makefile rules.
+end-sanitize-cygnus
+ (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
+ * Makefile.in: Rebuilt.
+ * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
+ i960-dis.c to ta.
+ * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
+ * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
+
+Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
+
+Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
+
+ * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
+ From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
+
+Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * fr30-opc.c: Regenerate.
+
+Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
+
+Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
+
+Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
+
+1998-11-30 Doug Evans <devans@casey.cygnus.com>
+
+ * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
+ CGEN_INSN_BASE_VALUE.
+start-sanitize-cygnus
+ * cgen-asm.in (insert_normal): Change start,length to unsigned int.
+ New args word_offset, word_length. Rewrite.
+ (FLD): Define.
+ (insert_1): Fix lsb0 case.
+ * cgen-dis.in (extract_normal): Change start,length to unsigned int.
+ New args word_offset, word_length. Rewrite.
+ (FLD): Define.
+ (extract_1): Fix lsb0 case.
+ * cgen-opc.in (FLD): Define.
+end-sanitize-cygnus
+ * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
+ * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
+
+start-sanitize-cygnus
+Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * Makefile.am (CGENFILES): Add rtx-funcs.scm.
+ * Makefile.in: Rebuild.
+
+end-sanitize-cygnus
+Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
+
+Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c: Regenerated.
+
+Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
+
+1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+
+Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+ * fr30-opc.h: Regenerated.
+ * fr30-dis.c: Regenerated.
+ * fr30-asm.c: Regenerated.
+
+Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
+
+ * mips-opc.c (sync.p,sync.l): Swap insn values.
+
+1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
+
+ * fr30-opc.c: Regenerate.
+
+Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+ * fr30-opc.h: Regenerated.
+
+1998-11-18 Doug Evans <devans@casey.cygnus.com>
+
+start-sanitize-cygnus
+ * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
+ (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
+ to hold value.
+ (insert_insn_normal): Fix typo.
+ * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
+ * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
+ Rewrite ! CGEN_INT_INSN_P case.
+ (extract_insn_normal): Ditto.
+ (extract_1): New arg `pc'. All callers updated.
+ Replace calls to bfd_getb8.
+ (fill_cache): New fn.
+ * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
+ * cgen-opc.in: ... from here.
+ (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
+end-sanitize-cygnus
+ * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
+
+Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+
+Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+ * fr30-opc.h: Regenerated.
+ * fr30-dis.c: Regenerated.
+ * fr30-asm.c: Regenerated.
+
+Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
+
+ * po/opcodes.pot: Regenerated.
+ * fr30-opc.c: Regenerated.
+ * fr30-opc.h: Regenerated.
+ * fr30-dis.c: Regenerated.
+ * fr30-asm.c: Regenerated.
+
Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
-start-sanitize-fr30
* disassemble.c (disassembler): Add support for FR30 target.
-end-sanitize-fr30
-
+
Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
start-sanitize-cygnus
CGEN_OPERAND_SEM_ONLY.
end-sanitize-cygnus
* m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
-start-sanitize-fr30
* fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
* po/POTFILES.in: Regenerate.
* fr30-opc.c: Regenerate.
* fr30-opc.h: Regenerate.
-end-sanitize-fr30
+
Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-asm.c: Regenerate.
-start-sanitize-fr30
Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
* configure.in: Added case for bfd_fr30_arch.
* po/POTFILES.in: Regenerated
* po/opcodes.pot: Regenerated
-end-sanitize-fr30
start-sanitize-m32rx
Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
end-sanitize-cygnus
* m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-am33
+start-sanitize-cygnus
Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Allow autoincrement stores using the same register
* m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
-end-sanitize-am33
+end-sanitize-cygnus
Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
* m32r-opc.h,m32r-opc.c: Regenerate.
-start-sanitize-am33
+start-sanitize-cygnus
Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
-end-sanitize-am33
+end-sanitize-cygnus
Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* i386-dis.c (OP_3DNowSuffix): New static function.
* m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
-start-sanitize-nortel-ppc750
1998-09-09 Michael Meissner <meissner@cygnus.com>
* ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
to/from SPRs.
-end-sanitize-nortel-ppc750
Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
* arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
* m10300-opc.c: Add entries for "no_match_operands" field in
the opcode table.
-start-sanitize-am33
+start-sanitize-cygnus
Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
* m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
operand.
-end-sanitize-am33
+end-sanitize-cygnus
Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
-start-sanitize-am33
+start-sanitize-cygnus
Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Add DSP autoincrement memory loads/stores.
* m10300-opc.c: Add autoincrement memory loads/stores.
-end-sanitize-am33
+end-sanitize-cygnus
start-sanitize-r5900
Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
end-sanitize-cygnus
* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-am33
+start-sanitize-cygnus
Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Fix load to sp and store from sp for the am33.
* m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
"mulu".
-end-sanitize-am33
+end-sanitize-cygnus
start-sanitize-r5900
Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
(OP_J): Remove unnecessary subtraction when 16-bit displacement
will be masked later.
-start-sanitize-am33
+start-sanitize-cygnus
Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
* m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
from raw register #s to symbolic names to make debugging easier.
-end-sanitize-am33
+end-sanitize-cygnus
Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
* m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
* configure: Regenerate.
end-sanitize-cygnus
-start-sanitize-am33
+start-sanitize-cygnus
Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
accidentally match a mn10300 instruction when we really
wanted an am33 instruction.
-end-sanitize-am33
+end-sanitize-cygnus
Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
* m10300-dis.c: Only recognize instructions from the currently
the DVP_OPERAND_RELOC_11_S4 relocation.
end-sanitize-sky
-start-sanitize-am33
+start-sanitize-cygnus
Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
* m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
"macbu" instructions. Fix typos in a couple DSP instructions too.
-end-sanitize-am33
+end-sanitize-cygnus
Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
* m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
be used as immediate values.
end-sanitize-sky
-start-sanitize-am33
+start-sanitize-cygnus
Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Support 4 byte DSP instructions.
-end-sanitize-am33
+end-sanitize-cygnus
Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
* mips-dis.c (_print_insn_mips): Fix argument interchange typo.
-start-sanitize-am33
+start-sanitize-cygnus
Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Support 6 and 7 byte am33 instructions.
-end-sanitize-am33
+end-sanitize-cygnus
Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
* m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
-start-sanitize-am33
+start-sanitize-cygnus
Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Support for 3 byte and 4 byte extended instructions
found on the mn10300.
-end-sanitize-am33
+end-sanitize-cygnus
1998-06-18 Ulrich Drepper <drepper@cygnus.com>
* i386-dis.c: Add support for fxsave, fxrstor, sysenter and
environments where the symbol table is not present, we no longer
rely in the symbol table, rather, use the low bit of the
instructions address to guess. There should be no change for usage
- of the disassembler in host based programse, gdb ,objdump.
+ of the disassembler in host based programs, gdb, objdump.
(print_insn_big_mips): ditto.
(print_insn_mips): ditto
Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
-start-sanitize-am33
+start-sanitize-cygnus
* m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
operands for the am33.
(mn10300_opcodes): Add new instructions from the am33.
-end-sanitize-am33
+end-sanitize-cygnus
* m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
+start-sanitize-cygnus
* cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
* cgen-dis.in (extract_normal): Likewise.
+end-sanitize-cygnus
* m32r-asm.c,m32r-dis.c: Regenerate.
start-sanitize-sky
* cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
(cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
(cgen_macro_insn_count): New function.
+start-sanitize-cygnus
* cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
All callers updated. Sanity check result of extract fn.
(@arch@_cgen_get_insn_operands): Change result type to void.
Delete args insn_value, length. New arg fields. All callers updated.
(@arch@_cgen_lookup_get_insn_operands): New function.
+end-sanitize-cygnus
* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
+start-sanitize-cygnus
Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
* cgen-asm.in: Move insertion of generated routines to top of file.
(print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
(print_keyword): Add prototype. Fix type of `attrs' arg.
+end-sanitize-cygnus
start-sanitize-vr4320
Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
* cgen-asm.c: Include symcat.h.
- * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
-
+ * cgen-dis.c,cgen-opc.c: Ditto.
+start-sanitize-cygnus
+ * cgen-asm.in,cgen-dis.in: Ditto.
+end-sanitize-cygnus
* m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
start-sanitize-sky
end-sanitize-sky
Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
+start-sanitize-cygnus
* Makefile.am (CGENFILES): Update.
* Makefile.in: Regenerate.
* cgen-asm.in (insert_normal): Result is error message now.
Validate value to be inserted.
(insert_insn_normal): Result is error message now.
(@arch@_cgen_assemble_insn): Update.
+end-sanitize-cygnus
* cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
arguments. Don't perform validation here.
* m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
+start-sanitize-cygnus
* cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
operand instance list.
+end-sanitize-cygnus
* m32r-opc.c: Regenerate.
Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
+start-sanitize-cygnus
* cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
Ignore ALIAS insns if asked to.
(@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
+end-sanitize-cygnus
* m32r-opc.c: Regenerate.
start-sanitize-sky
Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
+start-sanitize-cygnus
* cgen-opc.in: New file.
* cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
* Makefile.am (CGENFILES): Add cgen-opc.in.
* Makefile.in: Regenerate.
-
- * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
- (cgen_hw_lookup): Make result const.
-
* cgen-dis.in (*): Use PTR instead of void *.
(print_insn): Delete unused vars `i', `syntax'.
-
+end-sanitize-cygnus
+ * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
+ (cgen_hw_lookup): Make result const.
* m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
start-sanitize-sky