+start-sanitize-v850
+Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-dis.c (disassemble): Handle insertion of ',', '[' and
+ ']' characters into the output stream.
+ * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
+ Add "memop" field to all opcodes (for the disassembler).
+ Reorder opcodes so that "nop" comes before "mov" and "jr"
+ comes before "jarl".
+
+ * v850-dis.c (print_insn_v850): Fix typo in last change.
+
+ * v850-dis.c (print_insn_v850): Properly handle disassembling
+ a two byte insn at the end of a memory region when the memory
+ region's size is only two byte aligned.
+
+ * v850-dis.c (v850_cc_names): Fix stupid thinkos.
+
+ * v850-dis.c (v850_reg_names): Define.
+ (v850_sreg_names, v850_cc_names): Likewise.
+ (disassemble): Very rough cut at printing operands (unformatted).
+
+ * v850-opc.c (BOP_MASK): Fix.
+ (v850_opcodes): Fix mask for jarl and jr.
+
+ * v850-dis.c: New file. Skeleton for disassembler support.
+ * Makefile.in Remove v850 references, they're not needed here
+ and they weren't being sanitized away.
+ * configure.in: Add v850-dis.o when building v850 toolchains.
+ * configure: Rebuilt.
+ * disassemble.c (disassembler): Call v850 disassembler.
+
+ * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
+ (insert_d8_6, extract_d8_6): New functions.
+ (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
+ Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
+ Add D8_6.
+ (IF4A, IF4B): Use "D7" instead of "D7S".
+ (IF4C, IF4D): Use "D8_7" instead of "D8".
+ (IF4E, IF4F): New. Use "D8_6".
+ (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
+ sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
+
+ * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
+ (v850_operands): Change D16 to D16_15, use special insert/extract
+ routines. New new D16 that uses the generic insert/extract code.
+ (IF7A, IF7B): Use D16_15.
+ (IF7C, IF7D): New. Use D16.
+ (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
+
+ * v850-opc.c (insert_d9, insert_d22): Slightly improve error
+ message. Issue an error if the branch offset is odd.
+
+ * v850-opc.c: Add notes about needing special insert/extract
+ for all the load/store insns, except "ld.b" and "st.b".
+
+ * v850-opc.c (insert_d22, extract_d22): New functions.
+ (v850_operands): Use insert_d22 and extract_d22 for
+ D22 operands.
+ (insert_d9): Fix range check.
+
+Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
+
+ * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
+ and set bits field to D9 and D22 operands.
+
+Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_operands): Define SR2 operand.
+ (v850_opcodes): "ldsr" uses R1,SR2.
+
+ * v850-opc.c (v850_opcodes): Fix opcode specs for
+ sld.w, sst.b, sst.h, sst.w, and nop.
+
+Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_opcodes): Add null opcode to mark the
+ end of the opcode table.
+
+end-sanitize-v850
+start-sanitize-d10v
+Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (pre_defined_registers): Added register pairs,
+ "r0-r1", "r2-r3", etc.
+
+end-sanitize-d10v
+start-sanitize-v850
+Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_operands): Make I16 be a signed operand.
+ Create I16U for an unsigned 16bit mmediate operand.
+ (v850_opcodes): Use I16U for "ori", "andi" and "xori".
+
+ * v850-opc.c (v850_operands): Define EP operand.
+ (IF4A, IF4B, IF4C, IF4D): Use EP.
+
+ * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
+ with immediate operand, "movhi". Tweak "ldsr".
+
+ * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
+ correct. Get sld.[bhw] and sst.[bhw] closer.
+
+ * v850-opc.c (v850_operands): "not" is a two byte insn
+
+ * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
+
+ * v850-opc.c (v850_operands): D16 inserts at offset 16!
+
+ * v850-opc.c (two): Get order of words correct.
+
+ * v850-opc.c (v850_operands): I16 inserts at offset 16!
+
+ * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
+ register source and destination operands.
+ (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
+
+ * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
+ same thinko in "trap" opcode.
+
+ * v850-opc.c (v850_opcodes): Add initializer for size field
+ on all opcodes.
+
+ * v850-opc.c (v850_operands): D6 -> DS7. References changed.
+ Add D8 for 8-bit unsigned field in short load/store insns.
+ (IF4A, IF4D): These both need two registers.
+ (IF4C, IF4D): Define. Use 8-bit unsigned field.
+ (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
+ IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
+ for "ldsr" and "stsr".
+ * v850-opc.c (v850_operands): 3-bit immediate for bit insns
+ is unsigned.
+
+ * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
+ short store word (sst.w).
+
+Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * v850-opc.c (v850_operands): Added insert and extract fields,
+ pointers to functions that handle unusual operand encodings.
+
+Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_opcodes): Enable "trap".
+
+ * v850-opc.c (v850_opcodes): Fix order of displacement
+ and register for "set1", "clr1", "not1", and "tst1".
+
+Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_operands): Add "B3" support.
+ (v850_opcodes): Fix and enable "set1", "clr1", "not1"
+ and "tst1".
+
+ * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
+
+ * v850-opc.c: Close unterminated comment.
+
+Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
+
+ * v850-opc.c (v850_operands): Add flags field.
+ (v850_opcodes): add move opcodes.
+
+Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
+
+ * Makefile.in (ALL_MACHINES): Add v850-opc.o.
+ * configure: (bfd_v850v_arch) Add new case.
+ * configure.in: (bfd_v850_arch) Add new case.
+ * v850-opc.c: New file.
+
+end-sanitize-v850
+Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
+
+start-sanitize-d10v
+Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c: Add additional information to the opcode
+ table to help determinine which instructions can be done
+ in parallel.
+
+end-sanitize-d10v
+Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
+
+ * mpw-make.sed: Update editing of include pathnames to be
+ more general.
+
+Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
+
+ * arm-opc.h: Added "bx" instruction definition.
+
+Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
+
+ * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
+
+start-sanitize-d10v
+Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
+
+Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
+
+end-sanitize-d10v
+Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
+
+ * makefile.vms: Update for alpha-opc changes.
+
+Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * i386-dis.c (print_insn_i386): Actually return the correct value.
+ (ONE, OP_ONE): #ifdef out; not used.
+
+start-sanitize-d10v
+Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
+ Changed subi operand type to treat 0 as 16.
+
+end-sanitize-d10v
+Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
+ <rose@netcom.com>.
+
+Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
+
+ * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
+ memory transfer instructions. Add new format string entries %h and %s.
+ * arm-dis.c: (print_insn_arm): Provide decoding of the new
+ formats %h and %s.
+
+start-sanitize-d10v
+Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
+ (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
+
+end-sanitize-d10v
+Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * alpha-dis.c (print_insn_alpha_osf): Remove.
+ (print_insn_alpha_vms): Remove.
+ (print_insn_alpha): Make globally visible. Chose the register
+ names based on info->flavour.
+ * disassemble.c: Always return print_insn_alpha for the alpha.
+
+start-sanitize-d10v
+Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-dis.c (dis_long): Handle unknown opcodes.
+
+Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c: Changes to support signed and unsigned numbers.
+ All instructions with the same name that have long and short forms
+ now end in ".l" or ".s". Divs added.
+ * d10v-dis.c: Changes to support signed and unsigned numbers.
+
+Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-dis.c: Change all functions to use info->print_address_func.
+
+end-sanitize-d10v
+Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+
+ * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
+ move ccr/sr insns more strict so that the disassembler only
+ selects them when the addressing mode is data register.
+
+start-sanitize-d10v
+Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+ * d10v-opc.c (pre_defined_registers): Declare.
+ * d10v-dis.c (print_operand): Now uses pre_defined_registers
+ to pick a better name for the registers.
+
+end-sanitize-d10v
+Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
+ operands for fexpand and fpmerge. From Christian Kuehnke
+ <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
+
+Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
+
+ * alpha-dis.c (print_insn_alpha): No longer the user-visible
+ print routine. Take new regnames and cpumask arguments.
+ Kill the environment variable nonsense.
+ (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
+ (print_insn_alpha_vms): New function. Do VMS style regnames.
+ * disassemble.c (disassembler): Test bfd flavour to pick
+ between OSF and VMS routines. Default to OSF.
+
+Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Call AC_SUBST (INSTALL_SHLIB).
+ * configure: Rebuild.
+ * Makefile.in (install): Use @INSTALL_SHLIB@.
+
+start-sanitize-d10v
+ Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * configure: (bfd_d10v_arch) Add new case.
+ * configure.in: (bfd_d10v_arch) Add new case.
+ * d10v-dis.c: New file.
+ * d10v-opc.c: New file.
+ * disassemble.c (disassembler) Add entry for d10v.
+
+end-sanitize-d10v
+Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
+ to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
+
+Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
+
+ * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
+ distinguish between variants of the instruction set.
+ * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
+ distinguish between variants of the instruction set.
+
+Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
+
+ * i386-dis.c (print_insn_i8086): New routine to disassemble using
+ the 8086 instruction set.
+ * i386-dis.c: General cleanups. Make most things static. Add
+ prototypes. Get rid of static variables aflags and dflags. Pass
+ them as args (to almost everything).
+
+Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
+
+ * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
+
+ * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
+
+ * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
+ if the next arg is marked with SRC_IN_DST. Gross.
+
+ * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
+ we're looking for and find EXR.
+
+ * h8300-dis.c (bfd_h8_disassemble): We don't have a match
+ if we're looking for KBIT and we don't find it.
+
+ * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
+ for L_3 and L_2.
+
+ * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
+ 3bit immediate operands.
+
+Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * Released binutils 2.7.
+
+ * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
+ <kkaempf@progis.ac-net.de>.
+
Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
* alpha-opc.c: Correct second case of "mov" to use OPRL.
* h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
to just "mode".
-start-sanitize-h8s
* disassemble.c (disassembler): Handle H8/S.
* h8300-dis.c (print_insn_h8300s): New function for H8/S.
-end-sanitize-h8s
+
Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
* sparc-opc.c: Add beq/teq as aliases for be/te.
projects / deliverable / binutils-gdb.git / blobdiff