-2013-08-03 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-formats.h (PCREL): Reorder parameters and update the definition
- to match new mips_pcrel_operand layout.
- (JUMP, JALX, BRANCH): Update accordingly.
- * mips16-opc.c (decode_mips16_operand): Likewise.
-
-2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
-
- * micromips-opc.c (WR_s): Delete.
-
-2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI):
- New macros.
- (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R)
- (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete.
- (mips_builtin_opcodes): Use the new position-based read-write flags
- instead of field-based ones. Use UDI for "udi..." instructions.
- * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2):
- New macros.
- (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete.
- (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags.
- (WR_SP, RD_16): New macros.
- (RD_SP): Redefine as an INSN2_* flag.
- (MOD_SP): Redefine in terms of RD_SP and WR_SP.
- (mips16_opcodes): Use the new position-based read-write flags
- instead of field-based ones. Use RD_16 for "nop". Move RD_SP to
- pinfo2 field.
- * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2):
- New macros.
- (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj)
- (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D)
- (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete.
- (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP.
- (micromips_opcodes): Use the new position-based read-write flags
- instead of field-based ones.
- * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand.
- (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead
- of field-based flags.
-
-2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags.
- (WR_SP): Replace with...
- (MOD_SP): ...this.
- (mips16_opcodes): Update accordingly.
- * mips-dis.c (print_insn_mips16): Likewise.
-
-2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips16-opc.c (mips16_opcodes): Reformat.
-
-2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (mips_builtin_opcodes): Remove WR_* and RD_* flags
- for operands that are hard-coded to $0.
- * micromips-opc.c (micromips_opcodes): Likewise.
-
-2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (mips_builtin_opcodes): Use WR_31 rather than WR_d
- for the single-operand forms of JALR and JALR.HB.
- * micromips-opc.c (micromips_opcodes): Likewise JALR, JALRS, JALR.HB
- and JALRS.HB.
-
-2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (mips_builtin_opcodes): Add FP_D to VR5400 vector
- instructions. Fix them to use WR_MACC instead of WR_CC and
- add missing RD_MACCs.
-
-2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-dis.c (print_mips16_insn_arg): Include ISA bit in base address.
-
-2013-07-29 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-dis.c (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect.
-
-2013-07-26 Sergey Guriev <sergey.s.guriev@intel.com>
- Alexander Ivchenko <alexander.ivchenko@intel.com>
- Maxim Kuznetsov <maxim.kuznetsov@intel.com>
- Sergey Lega <sergey.s.lega@intel.com>
- Anna Tikhonova <anna.tikhonova@intel.com>
- Ilya Tocar <ilya.tocar@intel.com>
- Andrey Turetskiy <andrey.turetskiy@intel.com>
- Ilya Verbin <ilya.verbin@intel.com>
- Kirill Yukhin <kirill.yukhin@intel.com>
- Michael Zolotukhin <michael.v.zolotukhin@intel.com>
-
- * i386-dis-evex.h: New.
- * i386-dis.c (OP_Rounding): New.
- (VPCMP_Fixup): New.
- (OP_Mask): New.
- (Rdq): New.
- (XMxmmq): New.
- (EXdScalarS): New.
- (EXymm): New.
- (EXEvexHalfBcstXmmq): New.
- (EXxmm_mdq): New.
- (EXEvexXGscat): New.
- (EXEvexXNoBcst): New.
- (VPCMP): New.
- (EXxEVexR): New.
- (EXxEVexS): New.
- (XMask): New.
- (MaskG): New.
- (MaskE): New.
- (MaskR): New.
- (MaskVex): New.
- (modes enum): Add evex_x_gscat_mode, evex_x_nobcst_mode,
- evex_half_bcst_xmmq_mode, xmm_mdq_mode, ymm_mode,
- evex_rounding_mode, evex_sae_mode, mask_mode.
- (USE_EVEX_TABLE): New.
- (EVEX_TABLE): New.
- (EVEX enum): New.
- (REG enum): Add REG_EVEX_0F72, REG_EVEX_0F73, REG_EVEX_0F38C6,
- REG_EVEX_0F38C7.
- (MOD enum): Add MOD_EVEX_0F10_PREFIX_1, MOD_EVEX_0F10_PREFIX_3,
- MOD_EVEX_0F11_PREFIX_1, MOD_EVEX_0F11_PREFIX_3,
- MOD_EVEX_0F12_PREFIX_0, MOD_EVEX_0F16_PREFIX_0, MOD_EVEX_0F38C6_REG_1,
- MOD_EVEX_0F38C6_REG_2, MOD_EVEX_0F38C6_REG_5, MOD_EVEX_0F38C6_REG_6,
- MOD_EVEX_0F38C7_REG_1, MOD_EVEX_0F38C7_REG_2, MOD_EVEX_0F38C7_REG_5,
- MOD_EVEX_0F38C7_REG_6.
- (PREFIX enum): Add PREFIX_VEX_0F41, PREFIX_VEX_0F42, PREFIX_VEX_0F44,
- PREFIX_VEX_0F45, PREFIX_VEX_0F46, PREFIX_VEX_0F47, PREFIX_VEX_0F4B,
- PREFIX_VEX_0F90, PREFIX_VEX_0F91, PREFIX_VEX_0F92, PREFIX_VEX_0F93,
- PREFIX_VEX_0F98, PREFIX_VEX_0F3A30, PREFIX_VEX_0F3A32,
- PREFIX_VEX_0F3AF0, PREFIX_EVEX_0F10, PREFIX_EVEX_0F11,
- PREFIX_EVEX_0F12, PREFIX_EVEX_0F13, PREFIX_EVEX_0F14,
- PREFIX_EVEX_0F15, PREFIX_EVEX_0F16, PREFIX_EVEX_0F17,
- PREFIX_EVEX_0F28, PREFIX_EVEX_0F29, PREFIX_EVEX_0F2A,
- PREFIX_EVEX_0F2B, PREFIX_EVEX_0F2C, PREFIX_EVEX_0F2D,
- PREFIX_EVEX_0F2E, PREFIX_EVEX_0F2F, PREFIX_EVEX_0F51,
- PREFIX_EVEX_0F58, PREFIX_EVEX_0F59, PREFIX_EVEX_0F5A,
- PREFIX_EVEX_0F5B, PREFIX_EVEX_0F5C, PREFIX_EVEX_0F5D,
- PREFIX_EVEX_0F5E, PREFIX_EVEX_0F5F, PREFIX_EVEX_0F62,
- PREFIX_EVEX_0F66, PREFIX_EVEX_0F6A, PREFIX_EVEX_0F6C,
- PREFIX_EVEX_0F6D, PREFIX_EVEX_0F6E, PREFIX_EVEX_0F6F,
- PREFIX_EVEX_0F70, PREFIX_EVEX_0F72_REG_0, PREFIX_EVEX_0F72_REG_1,
- PREFIX_EVEX_0F72_REG_2, PREFIX_EVEX_0F72_REG_4,
- PREFIX_EVEX_0F72_REG_6, PREFIX_EVEX_0F73_REG_2,
- PREFIX_EVEX_0F73_REG_6, PREFIX_EVEX_0F76, PREFIX_EVEX_0F78,
- PREFIX_EVEX_0F79, PREFIX_EVEX_0F7A, PREFIX_EVEX_0F7B,
- PREFIX_EVEX_0F7E, PREFIX_EVEX_0F7F, PREFIX_EVEX_0FC2,
- PREFIX_EVEX_0FC6, PREFIX_EVEX_0FD2, PREFIX_EVEX_0FD3,
- PREFIX_EVEX_0FD4, PREFIX_EVEX_0FD6, PREFIX_EVEX_0FDB,
- PREFIX_EVEX_0FDF, PREFIX_EVEX_0FE2, PREFIX_EVEX_0FE6 PREFIX_EVEX_0FE7,
- PREFIX_EVEX_0FEB, PREFIX_EVEX_0FEF, PREFIX_EVEX_0FF2,
- PREFIX_EVEX_0FF3, PREFIX_EVEX_0FF4, PREFIX_EVEX_0FFA, PREFIX_EVEX_0FFB,
- PREFIX_EVEX_0FFE, PREFIX_EVEX_0F380C, PREFIX_EVEX_0F380D,
- PREFIX_EVEX_0F3811, PREFIX_EVEX_0F3812, PREFIX_EVEX_0F3813,
- PREFIX_EVEX_0F3814, PREFIX_EVEX_0F3815, PREFIX_EVEX_0F3816,
- PREFIX_EVEX_0F3818, PREFIX_EVEX_0F3819, PREFIX_EVEX_0F381A,
- PREFIX_EVEX_0F381B, PREFIX_EVEX_0F381E, PREFIX_EVEX_0F381F,
- PREFIX_EVEX_0F3821, PREFIX_EVEX_0F3822, PREFIX_EVEX_0F3823,
- PREFIX_EVEX_0F3824, PREFIX_EVEX_0F3825, PREFIX_EVEX_0F3827,
- PREFIX_EVEX_0F3828, PREFIX_EVEX_0F3829, PREFIX_EVEX_0F382A,
- PREFIX_EVEX_0F382C, PREFIX_EVEX_0F382D, PREFIX_EVEX_0F3831,
- PREFIX_EVEX_0F3832, PREFIX_EVEX_0F3833, PREFIX_EVEX_0F3834,
- PREFIX_EVEX_0F3835, PREFIX_EVEX_0F3836, PREFIX_EVEX_0F3837,
- PREFIX_EVEX_0F3839, PREFIX_EVEX_0F383A, PREFIX_EVEX_0F383B,
- PREFIX_EVEX_0F383D, PREFIX_EVEX_0F383F, PREFIX_EVEX_0F3840,
- PREFIX_EVEX_0F3842, PREFIX_EVEX_0F3843, PREFIX_EVEX_0F3844,
- PREFIX_EVEX_0F3845, PREFIX_EVEX_0F3846, PREFIX_EVEX_0F3847,
- PREFIX_EVEX_0F384C, PREFIX_EVEX_0F384D, PREFIX_EVEX_0F384E,
- PREFIX_EVEX_0F384F, PREFIX_EVEX_0F3858, PREFIX_EVEX_0F3859,
- PREFIX_EVEX_0F385A, PREFIX_EVEX_0F385B, PREFIX_EVEX_0F3864,
- PREFIX_EVEX_0F3865, PREFIX_EVEX_0F3876, PREFIX_EVEX_0F3877,
- PREFIX_EVEX_0F387C, PREFIX_EVEX_0F387E, PREFIX_EVEX_0F387F,
- PREFIX_EVEX_0F3888, PREFIX_EVEX_0F3889, PREFIX_EVEX_0F388A,
- PREFIX_EVEX_0F388B, PREFIX_EVEX_0F3890, PREFIX_EVEX_0F3891,
- PREFIX_EVEX_0F3892, PREFIX_EVEX_0F3893, PREFIX_EVEX_0F3896,
- PREFIX_EVEX_0F3897, PREFIX_EVEX_0F3898, PREFIX_EVEX_0F3899,
- PREFIX_EVEX_0F389A, PREFIX_EVEX_0F389B, PREFIX_EVEX_0F389C,
- PREFIX_EVEX_0F389D, PREFIX_EVEX_0F389E, PREFIX_EVEX_0F389F,
- PREFIX_EVEX_0F38A0, PREFIX_EVEX_0F38A1, PREFIX_EVEX_0F38A2,
- PREFIX_EVEX_0F38A3, PREFIX_EVEX_0F38A6, PREFIX_EVEX_0F38A7,
- PREFIX_EVEX_0F38A8, PREFIX_EVEX_0F38A9, PREFIX_EVEX_0F38AA,
- PREFIX_EVEX_0F38AB, PREFIX_EVEX_0F38AC, PREFIX_EVEX_0F38AD,
- PREFIX_EVEX_0F38AE, PREFIX_EVEX_0F38AF, PREFIX_EVEX_0F38B6,
- PREFIX_EVEX_0F38B7, PREFIX_EVEX_0F38B8, PREFIX_EVEX_0F38B9,
- PREFIX_EVEX_0F38BA, PREFIX_EVEX_0F38BB, PREFIX_EVEX_0F38BC,
- PREFIX_EVEX_0F38BD, PREFIX_EVEX_0F38BE, PREFIX_EVEX_0F38BF,
- PREFIX_EVEX_0F38C4, PREFIX_EVEX_0F38C6_REG_1,
- PREFIX_EVEX_0F38C6_REG_2, PREFIX_EVEX_0F38C6_REG_5,
- PREFIX_EVEX_0F38C6_REG_6, PREFIX_EVEX_0F38C7_REG_1,
- PREFIX_EVEX_0F38C7_REG_2, PREFIX_EVEX_0F38C7_REG_5,
- PREFIX_EVEX_0F38C7_REG_6, PREFIX_EVEX_0F38C8, PREFIX_EVEX_0F38CA,
- PREFIX_EVEX_0F38CB, PREFIX_EVEX_0F38CC, PREFIX_EVEX_0F38CD,
- PREFIX_EVEX_0F3A00, PREFIX_EVEX_0F3A01, PREFIX_EVEX_0F3A03,
- PREFIX_EVEX_0F3A04, PREFIX_EVEX_0F3A05, PREFIX_EVEX_0F3A08,
- PREFIX_EVEX_0F3A09, PREFIX_EVEX_0F3A0A, PREFIX_EVEX_0F3A0B,
- PREFIX_EVEX_0F3A17, PREFIX_EVEX_0F3A18, PREFIX_EVEX_0F3A19,
- PREFIX_EVEX_0F3A1A, PREFIX_EVEX_0F3A1B, PREFIX_EVEX_0F3A1D,
- PREFIX_EVEX_0F3A1E, PREFIX_EVEX_0F3A1F, PREFIX_EVEX_0F3A21,
- PREFIX_EVEX_0F3A23, PREFIX_EVEX_0F3A25, PREFIX_EVEX_0F3A26,
- PREFIX_EVEX_0F3A27, PREFIX_EVEX_0F3A38, PREFIX_EVEX_0F3A39,
- PREFIX_EVEX_0F3A3A, PREFIX_EVEX_0F3A3B, PREFIX_EVEX_0F3A3E,
- PREFIX_EVEX_0F3A3F, PREFIX_EVEX_0F3A43, PREFIX_EVEX_0F3A54,
- PREFIX_EVEX_0F3A55.
- (VEX_LEN enum): Add VEX_LEN_0F41_P_0, VEX_LEN_0F42_P_0, VEX_LEN_0F44_P_0,
- VEX_LEN_0F45_P_0, VEX_LEN_0F46_P_0, VEX_LEN_0F47_P_0,
- VEX_LEN_0F4B_P_2, VEX_LEN_0F90_P_0, VEX_LEN_0F91_P_0,
- VEX_LEN_0F92_P_0, VEX_LEN_0F93_P_0, VEX_LEN_0F98_P_0,
- VEX_LEN_0F3A30_P_2, VEX_LEN_0F3A32_P_2, VEX_W_0F41_P_0_LEN_1,
- VEX_W_0F42_P_0_LEN_1, VEX_W_0F44_P_0_LEN_0, VEX_W_0F45_P_0_LEN_1,
- VEX_W_0F46_P_0_LEN_1, VEX_W_0F47_P_0_LEN_1, VEX_W_0F4B_P_2_LEN_1,
- VEX_W_0F90_P_0_LEN_0, VEX_W_0F91_P_0_LEN_0, VEX_W_0F92_P_0_LEN_0,
- VEX_W_0F93_P_0_LEN_0, VEX_W_0F98_P_0_LEN_0, VEX_W_0F3A30_P_2_LEN_0,
- VEX_W_0F3A32_P_2_LEN_0.
- (VEX_W enum): Add EVEX_W_0F10_P_0, EVEX_W_0F10_P_1_M_0,
- EVEX_W_0F10_P_1_M_1, EVEX_W_0F10_P_2, EVEX_W_0F10_P_3_M_0,
- EVEX_W_0F10_P_3_M_1, EVEX_W_0F11_P_0, EVEX_W_0F11_P_1_M_0,
- EVEX_W_0F11_P_1_M_1, EVEX_W_0F11_P_2, EVEX_W_0F11_P_3_M_0,
- EVEX_W_0F11_P_3_M_1, EVEX_W_0F12_P_0_M_0, EVEX_W_0F12_P_0_M_1,
- EVEX_W_0F12_P_1, EVEX_W_0F12_P_2, EVEX_W_0F12_P_3, EVEX_W_0F13_P_0,
- EVEX_W_0F13_P_2, EVEX_W_0F14_P_0, EVEX_W_0F14_P_2, EVEX_W_0F15_P_0,
- EVEX_W_0F15_P_2, EVEX_W_0F16_P_0_M_0, EVEX_W_0F16_P_0_M_1,
- EVEX_W_0F16_P_1, EVEX_W_0F16_P_2, EVEX_W_0F17_P_0, EVEX_W_0F17_P_2,
- EVEX_W_0F28_P_0, EVEX_W_0F28_P_2, EVEX_W_0F29_P_0, EVEX_W_0F29_P_2,
- EVEX_W_0F2A_P_1, EVEX_W_0F2A_P_3, EVEX_W_0F2B_P_0, EVEX_W_0F2B_P_2,
- EVEX_W_0F2E_P_0, EVEX_W_0F2E_P_2, EVEX_W_0F2F_P_0, EVEX_W_0F2F_P_2,
- EVEX_W_0F51_P_0, EVEX_W_0F51_P_1, EVEX_W_0F51_P_2, EVEX_W_0F51_P_3,
- EVEX_W_0F58_P_0, EVEX_W_0F58_P_1, EVEX_W_0F58_P_2, EVEX_W_0F58_P_3,
- EVEX_W_0F59_P_0, EVEX_W_0F59_P_1, EVEX_W_0F59_P_2, EVEX_W_0F59_P_3,
- EVEX_W_0F5A_P_0, EVEX_W_0F5A_P_1, EVEX_W_0F5A_P_2, EVEX_W_0F5A_P_3,
- EVEX_W_0F5B_P_0, EVEX_W_0F5B_P_1, EVEX_W_0F5B_P_2, EVEX_W_0F5C_P_0,
- EVEX_W_0F5C_P_1, EVEX_W_0F5C_P_2, EVEX_W_0F5C_P_3, EVEX_W_0F5D_P_0,
- EVEX_W_0F5D_P_1, EVEX_W_0F5D_P_2, EVEX_W_0F5D_P_3, EVEX_W_0F5E_P_0,
- EVEX_W_0F5E_P_1, EVEX_W_0F5E_P_2, EVEX_W_0F5E_P_3, EVEX_W_0F5F_P_0,
- EVEX_W_0F5F_P_1, EVEX_W_0F5F_P_2, EVEX_W_0F5F_P_3, EVEX_W_0F62_P_2,
- EVEX_W_0F66_P_2, EVEX_W_0F6A_P_2, EVEX_W_0F6C_P_2, EVEX_W_0F6D_P_2,
- EVEX_W_0F6E_P_2, EVEX_W_0F6F_P_1, EVEX_W_0F6F_P_2, EVEX_W_0F70_P_2,
- EVEX_W_0F72_R_2_P_2, EVEX_W_0F72_R_6_P_2, EVEX_W_0F73_R_2_P_2,
- EVEX_W_0F73_R_6_P_2, EVEX_W_0F76_P_2, EVEX_W_0F78_P_0,
- EVEX_W_0F79_P_0, EVEX_W_0F7A_P_1, EVEX_W_0F7A_P_3, EVEX_W_0F7B_P_1,
- EVEX_W_0F7B_P_3, EVEX_W_0F7E_P_1, EVEX_W_0F7E_P_2, EVEX_W_0F7F_P_1,
- EVEX_W_0F7F_P_2, EVEX_W_0FC2_P_0, EVEX_W_0FC2_P_1, EVEX_W_0FC2_P_2,
- EVEX_W_0FC2_P_3, EVEX_W_0FC6_P_0, EVEX_W_0FC6_P_2, EVEX_W_0FD2_P_2,
- EVEX_W_0FD3_P_2, EVEX_W_0FD4_P_2, EVEX_W_0FD6_P_2, EVEX_W_0FE6_P_1,
- EVEX_W_0FE6_P_2, EVEX_W_0FE6_P_3, EVEX_W_0FE7_P_2, EVEX_W_0FF2_P_2,
- EVEX_W_0FF3_P_2, EVEX_W_0FF4_P_2, EVEX_W_0FFA_P_2, EVEX_W_0FFB_P_2,
- EVEX_W_0FFE_P_2, EVEX_W_0F380C_P_2, EVEX_W_0F380D_P_2,
- EVEX_W_0F3811_P_1, EVEX_W_0F3812_P_1, EVEX_W_0F3813_P_1,
- EVEX_W_0F3813_P_2, EVEX_W_0F3814_P_1, EVEX_W_0F3815_P_1,
- EVEX_W_0F3818_P_2, EVEX_W_0F3819_P_2, EVEX_W_0F381A_P_2,
- EVEX_W_0F381B_P_2, EVEX_W_0F381E_P_2, EVEX_W_0F381F_P_2,
- EVEX_W_0F3821_P_1, EVEX_W_0F3822_P_1, EVEX_W_0F3823_P_1,
- EVEX_W_0F3824_P_1, EVEX_W_0F3825_P_1, EVEX_W_0F3825_P_2,
- EVEX_W_0F3828_P_2, EVEX_W_0F3829_P_2, EVEX_W_0F382A_P_1,
- EVEX_W_0F382A_P_2, EVEX_W_0F3831_P_1, EVEX_W_0F3832_P_1,
- EVEX_W_0F3833_P_1, EVEX_W_0F3834_P_1, EVEX_W_0F3835_P_1,
- EVEX_W_0F3835_P_2, EVEX_W_0F3837_P_2, EVEX_W_0F383A_P_1,
- EVEX_W_0F3840_P_2, EVEX_W_0F3858_P_2, EVEX_W_0F3859_P_2,
- EVEX_W_0F385A_P_2, EVEX_W_0F385B_P_2, EVEX_W_0F3891_P_2,
- EVEX_W_0F3893_P_2, EVEX_W_0F38A1_P_2, EVEX_W_0F38A3_P_2,
- EVEX_W_0F38C7_R_1_P_2, EVEX_W_0F38C7_R_2_P_2, EVEX_W_0F38C7_R_5_P_2,
- EVEX_W_0F38C7_R_6_P_2, EVEX_W_0F3A00_P_2, EVEX_W_0F3A01_P_2,
- EVEX_W_0F3A04_P_2, EVEX_W_0F3A05_P_2, EVEX_W_0F3A08_P_2,
- EVEX_W_0F3A09_P_2, EVEX_W_0F3A0A_P_2, EVEX_W_0F3A0B_P_2,
- EVEX_W_0F3A18_P_2, EVEX_W_0F3A19_P_2, EVEX_W_0F3A1A_P_2,
- EVEX_W_0F3A1B_P_2, EVEX_W_0F3A1D_P_2, EVEX_W_0F3A21_P_2,
- EVEX_W_0F3A23_P_2, EVEX_W_0F3A38_P_2, EVEX_W_0F3A39_P_2,
- EVEX_W_0F3A3A_P_2, EVEX_W_0F3A3B_P_2, EVEX_W_0F3A43_P_2.
- (struct vex): Add fields evex, r, v, mask_register_specifier,
- zeroing, ll, b.
- (intel_names_xmm): Add upper 16 registers.
- (att_names_xmm): Ditto.
- (intel_names_ymm): Ditto.
- (att_names_ymm): Ditto.
- (names_zmm): New.
- (intel_names_zmm): Ditto.
- (att_names_zmm): Ditto.
- (names_mask): Ditto.
- (intel_names_mask): Ditto.
- (att_names_mask): Ditto.
- (names_rounding): Ditto.
- (names_broadcast): Ditto.
- (x86_64_table): Add escape to evex-table.
- (reg_table): Include reg_table evex-entries from
- i386-dis-evex.h. Fix prefetchwt1 instruction.
- (prefix_table): Add entries for new instructions.
- (vex_table): Ditto.
- (vex_len_table): Ditto.
- (vex_w_table): Ditto.
- (mod_table): Ditto.
- (get_valid_dis386): Properly handle new instructions.
- (print_insn): Handle zmm and mask registers, print mask operand.
- (intel_operand_size): Support EVEX, new modes and sizes.
- (OP_E_register): Handle new modes.
- (OP_E_memory): Ditto.
- (OP_G): Ditto.
- (OP_XMM): Ditto.
- (OP_EX): Ditto.
- (OP_VEX): Ditto.
- * i386-gen.c (cpu_flag_init): Update CPU_ANY_SSE_FLAGS and
- CPU_ANY_AVX_FLAGS. Add CPU_AVX512F_FLAGS, CPU_AVX512CD_FLAGS,
- CPU_AVX512ER_FLAGS and CPU_AVX512PF_FLAGS.
- (cpu_flags): Add CpuAVX512F, CpuAVX512CD, CpuAVX512ER,
- CpuAVX512PF and CpuVREX.
- (operand_type_init): Add OPERAND_TYPE_REGZMM,
- OPERAND_TYPE_REGMASK and OPERAND_TYPE_VEC_DISP8.
- (opcode_modifiers): Add EVex, Masking, VecESize, Broadcast,
- StaticRounding, SAE, Disp8MemShift, NoDefMask.
- (operand_types): Add RegZMM, RegMask, Vec_Disp8, Zmmword.
- * i386-init.h: Regenerate.
- * i386-opc.h (CpuAVX512F): New.
- (CpuAVX512CD): New.
- (CpuAVX512ER): New.
- (CpuAVX512PF): New.
- (CpuVREX): New.
- (i386_cpu_flags): Add cpuavx512f, cpuavx512cd, cpuavx512er,
- cpuavx512pf and cpuvrex fields.
- (VecSIB): Add VecSIB512.
- (EVex): New.
- (Masking): New.
- (VecESize): New.
- (Broadcast): New.
- (StaticRounding): New.
- (SAE): New.
- (Disp8MemShift): New.
- (NoDefMask): New.
- (i386_opcode_modifier): Add evex, masking, vecesize, broadcast,
- staticrounding, sae, disp8memshift and nodefmask.
- (RegZMM): New.
- (Zmmword): Ditto.
- (Vec_Disp8): Ditto.
- (i386_operand_type): Add regzmm, regmask, zmmword and vec_disp8
- fields.
- (RegVRex): New.
- * i386-opc.tbl: Add AVX512 instructions.
- * i386-reg.tbl: Add 16 upper XMM and YMM registers, 32 new ZMM
- registers, mask registers.
- * i386-tbl.h: Regenerate.
-
-2013-07-25 Aaro Koskinen <aaro.koskinen@iki.fi>
-
- PR gas/15220
- * mips-opc.c (mips_builtin_opcodes): Fix wrong opcodes for
- Loongson 2F madd.ps, msub.ps, nmadd.ps and nmsub.ps.
-
-2013-07-25 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
-
- * i386-dis.c (PREFIX enum): Add PREFIX_0F38C8, PREFIX_0F38C9,
- PREFIX_0F38CA, PREFIX_0F38CB, PREFIX_0F38CC, PREFIX_0F38CD,
- PREFIX_0F3ACC.
- (prefix_table): Updated.
- (three_byte_table): Likewise.
- * i386-gen.c (cpu_flag_init): Add CPU_SHA_FLAGS.
- (cpu_flags): Add CpuSHA.
- (i386_cpu_flags): Add cpusha.
- * i386-init.h: Regenerate.
- * i386-opc.h (CpuSHA): New.
- (CpuUnused): Restored.
- (i386_cpu_flags): Add cpusha.
- * i386-opc.tbl: Add SHA instructions.
- * i386-tbl.h: Regenerate.
-
-2013-07-24 Anna Tikhonova <anna.tikhonova@intel.com>
- Kirill Yukhin <kirill.yukhin@intel.com>
- Michael Zolotukhin <michael.v.zolotukhin@intel.com>
-
- * i386-dis.c (BND_Fixup): New.
- (Ebnd): New.
- (Ev_bnd): New.
- (Gbnd): New.
- (BND): New.
- (v_bnd_mode): New.
- (bnd_mode): New.
- (MOD enum): Add MOD_0F1A_PREFIX_0, MOD_0F1B_PREFIX_0,
- MOD_0F1B_PREFIX_1.
- (PREFIX enum): Add PREFIX_0F1A, PREFIX_0F1B.
- (dis tables): Replace XX with BND for near branch and call
- instructions.
- (prefix_table): Add new entries.
- (mod_table): Likewise.
- (names_bnd): New.
- (intel_names_bnd): New.
- (att_names_bnd): New.
- (BND_PREFIX): New.
- (prefix_name): Handle BND_PREFIX.
- (print_insn): Initialize names_bnd.
- (intel_operand_size): Handle new modes.
- (OP_E_register): Likewise.
- (OP_E_memory): Likewise.
- (OP_G): Likewise.
- * i386-gen.c (cpu_flag_init): Add CpuMPX.
- (cpu_flags): Add CpuMPX.
- (operand_type_init): Add RegBND.
- (opcode_modifiers): Add BNDPrefixOk.
- (operand_types): Add RegBND.
- * i386-init.h: Regenerate.
- * i386-opc.h (CpuMPX): New.
- (CpuUnused): Comment out.
- (i386_cpu_flags): Add cpumpx.
- (BNDPrefixOk): New.
- (i386_opcode_modifier): Add bndprefixok.
- (RegBND): New.
- (i386_operand_type): Add regbnd.
- * i386-opc.tbl: Add BNDPrefixOk to near jumps, calls and rets.
- Add MPX instructions and bnd prefix.
- * i386-reg.tbl: Add bnd0-bnd3 registers.
- * i386-tbl.h: Regenerate.
-
-2013-07-17 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-formats.h (MAPPED_INT, MAPPED_REG, REG_PAIR): Add
- ATTRIBUTE_UNUSED.
-
-2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
-
- * Makefile.am (mips-opc.lo, micromips-opc.lo, mips16-opc.lo): Remove
- special rules.
- * Makefile.in: Regenerate.
- * mips-opc.c, micromips-opc.c, mips16-opc.c: Explicitly initialize
- all fields. Reformat.
-
-2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips16-opc.c: Include mips-formats.h.
- (reg_0_map, reg_29_map, reg_31_map, reg_m16_map, reg32r_map): New
- static arrays.
- (decode_mips16_operand): New function.
- * mips-dis.c (mips16_to_32_reg_map, mips16_reg_names): Delete.
- (print_insn_arg): Handle OP_ENTRY_EXIT list.
- Abort for OP_SAVE_RESTORE_LIST.
- (print_mips16_insn_arg): Change interface. Use mips_operand
- structures. Delete GET_OP_S. Move GET_OP definition to...
- (print_insn_mips16): ...here. Call init_print_arg_state.
- Update the call to print_mips16_insn_arg.
-
-2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-formats.h: New file.
- * mips-opc.c: Include mips-formats.h.
- (reg_0_map): New static array.
- (decode_mips_operand): New function.
- * micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h.
- (reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map)
- (reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map)
- (int_c_map): New static arrays.
- (decode_micromips_operand): New function.
- * mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
- (micromips_to_32_reg_d_map, micromips_to_32_reg_e_map)
- (micromips_to_32_reg_f_map, micromips_to_32_reg_g_map)
- (micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2)
- (micromips_to_32_reg_l_map, micromips_to_32_reg_m_map)
- (micromips_to_32_reg_n_map, micromips_to_32_reg_q_map)
- (micromips_imm_b_map, micromips_imm_c_map): Delete.
- (print_reg): New function.
- (mips_print_arg_state): New structure.
- (init_print_arg_state, print_insn_arg): New functions.
- (print_insn_args): Change interface and use mips_operand structures.
- Delete GET_OP_S. Move GET_OP definition to...
- (print_insn_mips): ...here. Update the call to print_insn_args.
- (print_insn_micromips): Use print_insn_args.
-
-2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips16-opc.c (mips16_opcodes): Use "I" for immediate operands
- in macros.
-
-2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (mips_builtin_opcodes): Use "S,T" rather than "V,T" for
- ADDA.S, MULA.S and SUBA.S.
-
-2013-07-08 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/13572
- * i386-opc.tbl: Replace Xmmword with Qword on cvttps2pi.
- * i386-tbl.h: Regenerated.
-
-2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD
- and SD A(B) macros up.
- * micromips-opc.c (micromips_opcodes): Likewise.
-
-2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips16-opc.c: Add entries for argumentless "entry" and "exit"
- instructions.
-
-2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
- MDMX-like instructions.
- * mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
- printing "Q" operands for INSN_5400 instructions.
-
-2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and
- "+S" for "cins".
- * mips-dis.c (print_mips_arg): Update "+s" and "+S" comments.
- Combine cases.
-
-2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
- "jalx".
- * mips16-opc.c (mips16_opcodes): Likewise.
- * micromips-opc.c (micromips_opcodes): Likewise.
- * mips-dis.c (print_insn_args, print_mips16_insn_arg)
- (print_insn_mips16): Handle "+i".
- (print_insn_micromips): Likewise. Conditionally preserve the
- ISA bit for "a" but not for "+i".
-
-2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
-
- * micromips-opc.c (WR_mhi): Rename to..
- (WR_mh): ...this.
- (micromips_opcodes): Update "movep" entry accordingly. Replace
- "mh,mi" with "mh".
- * mips-dis.c (micromips_to_32_reg_h_map): Rename to...
- (micromips_to_32_reg_h_map1): ...this.
- (micromips_to_32_reg_i_map): Rename to...
- (micromips_to_32_reg_h_map2): ...this.
- (print_micromips_insn): Remove "mi" case. Print both registers
- in the pair for "mh".
-
-2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
-
- * mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
- * micromips-opc.c (micromips_opcodes): Likewise.
- * mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
- and "+T" handling. Check for a "0" suffix when deciding whether to
- use coprocessor 0 names. In that case, also check for ",H" selectors.
-
-2013-07-05 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
-
- * s390-opc.c (J12_12, J24_24): New macros.
- (INSTR_MII_UPI): Rename to INSTR_MII_UPP.
- (MASK_MII_UPI): Rename to MASK_MII_UPP.
- * s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.
-
-2013-07-04 Alan Modra <amodra@gmail.com>
-
- * ppc-opc.c (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu.
-
-2013-06-26 Nick Clifton <nickc@redhat.com>
-
- * rx-decode.opc (rx_decode_opcode): Check sd field as well as ss
- field when checking for type 2 nop.
- * rx-decode.c: Regenerate.
-
-2013-06-25 Maciej W. Rozycki <macro@codesourcery.com>
-
- * micromips-opc.c (micromips_opcodes): Add "jraddiusp", "jrc"
- and "movep" macros.
-
-2013-06-24 Maciej W. Rozycki <macro@codesourcery.com>
-
- * mips-dis.c (is_mips16_plt_tail): New function.
- (print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
- word.
- (is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
-
-2013-06-21 DJ Delorie <dj@redhat.com>
-
- * msp430-decode.opc: New.
- * msp430-decode.c: New/generated.
- * Makefile.am (TARGET_LIBOPCODES_CFILES): Add msp430-decode.c.
- (MAINTAINER_CLEANFILES): Likewise.
- Add rule to build msp430-decode.c frommsp430decode.opc
- using the opc2c program.
- * Makefile.in: Regenerate.
- * configure.in: Add msp430-decode.lo to msp430 architecture files.
- * configure: Regenerate.
-
-2013-06-20 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * aarch64-dis.c (EMBEDDED_ENV): Remove the check on it.
- (SYMTAB_AVAILABLE): Removed.
- (#include "elf/aarch64.h): Ditto.
-
-2013-06-17 Catherine Moore <clm@codesourcery.com>
- Maciej W. Rozycki <macro@codesourcery.com>
- Chao-Ying Fu <fu@mips.com>
-
- * micromips-opc.c (EVA): Define.
- (TLBINV): Define.
- (micromips_opcodes): Add EVA opcodes.
- * mips-dis.c (mips_arch_choices): Update for ASE_EVA.
- (print_insn_args): Handle EVA offsets.
- (print_insn_micromips): Likewise.
- * mips-opc.c (EVA): Define.
- (TLBINV): Define.
- (mips_builtin_opcodes): Add EVA opcodes.
-
-2013-06-17 Alan Modra <amodra@gmail.com>
-
- * Makefile.am (mips-opc.lo): Add rules to create automatic
- dependency files. Pass archdefs.
- (micromips-opc.lo, mips16-opc.lo): Likewise.
- * Makefile.in: Regenerate.
-
-2013-06-14 DJ Delorie <dj@redhat.com>
-
- * rx-decode.opc (rx_decode_opcode): Bit operations on
- registers are 32-bit operations, not 8-bit operations.
- * rx-decode.c: Regenerate.
-
-2013-06-13 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
-
- * micromips-opc.c (IVIRT): New define.
- (IVIRT64): New define.
- (micromips_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
- tlbginv, tlbginvf, tlbgp, tlbgr, tlbgwi, tlbgwr VIRT instructions.
-
- * mips-dis.c (print_insn_micromips): Handle mfgc0, mtgc0, dmfgc0,
- dmtgc0 to print cp0 names.
-
-2013-06-09 Sandra Loosemore <sandra@codesourcery.com>
-
- * nios2-opc.c (nios2_builtin_opcodes): Give "trap" a type-"b"
- argument.
-
-2013-06-08 Catherine Moore <clm@codesourcery.com>
- Richard Sandiford <rdsandiford@googlemail.com>
-
- * micromips-opc.c (D32, D33, MC): Update definitions.
- (micromips_opcodes): Initialize ase field.
- * mips-dis.c (mips_arch_choice): Add ase field.
- (mips_arch_choices): Initialize ase field.
- (set_default_mips_dis_options): Declare and setup mips_ase.
- * mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64,
- MT32, MC): Update definitions.
- (mips_builtin_opcodes): Initialize ase field.
-
-2013-05-24 Richard Sandiford <rsandifo@linux.vnet.ibm.com>
-
- * s390-opc.txt (flogr): Require a register pair destination.
-
-2013-05-23 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
-
- * s390-opc.c: Fix length operand in RSL_LRDFU and RSL_LRDFEU
- instruction format.
-
-2013-05-22 Jürgen Urban <JuergenUrban@gmx.de>
-
- * mips-opc.c (mips_builtin_opcodes): Add R5900 VU0 instructions.
-
-2013-05-20 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-dis.c (powerpc_init_dialect): Set default dialect to power8.
- * ppc-opc.c (BHRBE, ST, SIX, PS, SXL, VXPS_MASK, XX1RB_MASK,
- XLS_MASK, PPCVSX2): New defines.
- (powerpc_opcodes) <bcdadd., bcdsub., bctar, bctar, bctarl, clrbhrb,
- fmrgew, fmrgow, lqarx, lxsiwax, lxsiwzx, lxsspx, mfbhrbe,
- mffprd, mffprwz, mfvrd, mfvrwz, mfvsrd, mfvsrwz, msgclrp, msgsndp,
- mtfprd, mtfprwa, mtfprwz, mtsle, mtvrd, mtvrwa, mtvrwz, mtvsrd,
- mtvsrwa, mtvsrwz, pbt., rfebb, stqcx., stxsiwx, stxsspx,
- vaddcuq, vaddecuq, vaddeuqm, vaddudm, vadduqm, vbpermq, vcipher,
- vcipherlast, vclzb, vclzd, vclzh, vclzw, vcmpequd, vcmpequd.,
- vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv, vgbbd, vmaxsd,
- vmaxud, vminsd, vminud, vmrgew, vmrgow, vmulesw, vmuleuw, vmulosw,
- vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc, vpermxor,
- vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd, vpmsumh,
- vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox,
- vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq,
- vsubeuqm, vsubudm, vsubuqm, vupkhsw, vupklsw, waitasec, xsaddsp,
- xscvdpspn, xscvspdpn, xscvsxdsp, xscvuxdsp, xsdivsp, xsmaddasp,
- xsmaddmsp, xsmsubasp, xsmsubmsp, xsmulsp, xsnmaddasp, xsnmaddmsp,
- xsnmsubasp, xsnmsubmsp, xsresp, xsrsp, xsrsqrtesp, xssqrtsp,
- xssubsp, xxleqv, xxlnand, xxlorc>: New instructions.
- <lxvx, stxvx>: New extended mnemonics.
-
-2013-05-17 Alan Modra <amodra@gmail.com>
-
- * ia64-raw.tbl: Replace non-ASCII char.
- * ia64-waw.tbl: Likewise.
- * ia64-asmtab.c: Regenerate.
-
-2013-05-15 Saravanan Ekanathan <saravanan.ekanathan@amd.com>
-
- * i386-gen.c (cpu_flag_init): Add CpuFSGSBase in CPU_BDVER3_FLAGS.
- * i386-init.h: Regenerated.
-
-2013-05-13 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Remove assertion.
- * aarch64-opc.c (operand_general_constraint_met_p): Relax the range
- check from [0, 255] to [-128, 255].
-
-2013-05-09 Andrew Pinski <apinski@cavium.com>
-
- * mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2.
- Add INSN_VIRT and INSN_VIRT64 to mips64r2.
- (parse_mips_dis_option): Handle the virt option.
- (print_insn_args): Handle "+J".
- (print_mips_disassembler_options): Print out message about virt64.
- * mips-opc.c (IVIRT): New define.
- (IVIRT64): New define.
- (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
- tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
- Move rfe to the bottom as it conflicts with tlbgp.
-
-2013-05-09 Alan Modra <amodra@gmail.com>
-
- * ppc-opc.c (extract_vlesi): Properly sign extend.
- (extract_vlensi): Likewise. Comment reason for setting invalid.
-
-2013-05-02 Nick Clifton <nickc@redhat.com>
-
- * msp430-dis.c: Add support for MSP430X instructions.
-
-2013-04-24 Sandra Loosemore <sandra@codesourcery.com>
-
- * nios2-opc.c (nios2_builtin_reg): Rename "fstatus" control register
- to "eccinj".
-
-2013-04-17 Wei-chen Wang <cole945@gmail.com>
-
- PR binutils/15369
- * cgen-dis.c (hash_insn_array): Use CGEN_CPU_INSN_ENDIAN instead
- of CGEN_CPU_ENDIAN.
- (hash_insns_list): Likewise.
-
-2013-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
-
- * rl78-dis.c (print_insn_rl78): Use alternative form as a GCC false
- warning workaround.
-
-2013-04-08 Jan Beulich <jbeulich@suse.com>
-
- * i386-opc.tbl: Fold 64-bit and non-64-bit jecxz entries.
- * i386-tbl.h: Re-generate.
-
-2013-04-06 David S. Miller <davem@davemloft.net>
-
- * sparc-dis.c (compare_opcodes): When encountering multiple aliases
- of an opcode, prefer the one with F_PREFERRED set.
- * sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
- lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
- ops. Make 64-bit VIS logical ops have "d" suffix in their names,
- mark existing mnenomics as aliases. Add "cc" suffix to edge
- instructions generating condition codes, mark existing mnenomics
- as aliases. Add "fp" prefix to VIS compare instructions, mark
- existing mnenomics as aliases.
-
-2013-04-03 Nick Clifton <nickc@redhat.com>
-
- * v850-dis.c (print_value): With V850_INVERSE_PCREL compute the
- destination address by subtracting the operand from the current
- address.
- * v850-opc.c (insert_u16_loop): Disallow negative offsets. Store
- a positive value in the insn.
- (extract_u16_loop): Do not negate the returned value.
- (D16_LOOP): Add V850_INVERSE_PCREL flag.
-
- (ceilf.sw): Remove duplicate entry.
- (cvtf.hs): New entry.
- (cvtf.sh): Likewise.
- (fmaf.s): Likewise.
- (fmsf.s): Likewise.
- (fnmaf.s): Likewise.
- (fnmsf.s): Likewise.
- (maddf.s): Restrict to E3V5 architectures.
- (msubf.s): Likewise.
- (nmaddf.s): Likewise.
- (nmsubf.s): Likewise.
-
-2013-03-27 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (get_sib): Add the sizeflag argument. Properly
- check address mode.
- (print_insn): Pass sizeflag to get_sib.
-
-2013-03-27 Alexis Deruelle <alexis.deruelle@gmail.com>
-
- PR binutils/15068
- * tic6x-dis.c: Add support for displaying 16-bit insns.
-
-2013-03-20 Alexis Deruelle <alexis.deruelle@gmail.com>
-
- PR gas/15095
- * tic6x-dis.c (print_insn_tic6x): Decode opcodes that have
- individual msb and lsb halves in src1 & src2 fields. Discard the
- src1 (lsb) value and only use src2 (msb), discarding bit 0, to
- follow what Ti SDK does in that case as any value in the src1
- field yields the same output with SDK disassembler.
-
-2013-03-12 Michael Eager <eager@eagercon.com>
-
- * opcodes/mips-dis.c (print_insn_args): Modify def of reg.
-
-2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
-
- * nios2-opc.c (nios2_builtin_opcodes): Add entry for wrprs.
-
-2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
-
- * nios2-opc.c (nios2_builtin_opcodes): Add entry for rdprs.
-
-2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
-
- * nios2-opc.c (nios2_builtin_regs): Add sstatus alias for ba register.
-
-2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
-
- * arm-dis.c (arm_opcodes): Add entries for CRC instructions.
- (thumb32_opcodes): Likewise.
- (print_insn_thumb32): Handle 'S' control char.
-
-2013-03-08 Yann Sionneau <yann.sionneau@gmail.com>
-
- * lm32-desc.c: Regenerate.
-
-2013-03-01 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-reg.tbl (riz): Add RegRex64.
- * i386-tbl.h: Regenerated.
-
-2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * aarch64-tbl.h (QL_I3SAMEW, QL_I3WWX): New macros.
- (aarch64_feature_crc): New static.
- (CRC): New macro.
- (aarch64_opcode_table): Add entries for the crc32b, crc32h, crc32w,
- crc32x, crc32cb, crc32ch, crc32cw and crc32cx instructions.
- * aarch64-asm-2.c: Re-generate.
- * aarch64-dis-2.c: Ditto.
- * aarch64-opc-2.c: Ditto.
-
-2013-02-27 Alan Modra <amodra@gmail.com>
-
- * rl78-decode.opc (rl78_decode_opcode): Fix typo.
- * rl78-decode.c: Regenerate.
-
-2013-02-25 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com>
-
- * rl78-decode.opc: Fix encoding of DIVWU insn.
- * rl78-decode.c: Regenerate.
-
-2013-02-19 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/15159
- * i386-dis.c (rm_table): Add clac and stac to RM_0F01_REG_1.
-
- * i386-gen.c (cpu_flag_init): Add CPU_SMAP_FLAGS.
- (cpu_flags): Add CpuSMAP.
-
- * i386-opc.h (CpuSMAP): New.
- (i386_cpu_flags): Add cpusmap.
-
- * i386-opc.tbl: Add clac and stac.
-
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
-2013-02-15 Markos Chandras <markos.chandras@imgtec.com>
-
- * metag-dis.c: Initialize outf->bytes_per_chunk to 4
- which also makes the disassembler output be in little
- endian like it should be.
-
-2013-02-14 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * aarch64-opc.c (aarch64_prfops): Change unnamed operation 'name'
- fields to NULL.
- (aarch64_print_operand): Adjust the printing for AARCH64_OPND_PRFOP.
-
-2013-02-13 Maciej W. Rozycki <macro@codesourcery.com>
-
- * mips-dis.c (is_compressed_mode_p): Only match symbols from the
- section disassembled.
-
-2013-02-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
-
- * arm-dis.c: Update strht pattern.
-
-2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
-
- * mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for
- single-float. Disable ll, lld, sc and scd for EE. Disable the
- trunc.w.s macro for EE.
-
-2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
- Andrew Jenner <andrew@codesourcery.com>
-
- Based on patches from Altera Corporation.
-
- * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and
- nios2-opc.c.
- * Makefile.in: Regenerated.
- * configure.in: Add case for bfd_nios2_arch.
- * configure: Regenerated.
- * disassemble.c (ARCH_nios2): Define.
- (disassembler): Add case for bfd_arch_nios2.
- * nios2-dis.c: New file.
- * nios2-opc.c: New file.
-
-2013-02-04 Alan Modra <amodra@gmail.com>
+2014-02-10 Alan Modra <amodra@gmail.com>
* po/POTFILES.in: Regenerate.
- * rl78-decode.c: Regenerate.
- * rx-decode.c: Regenerate.
-
-2013-01-30 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * aarch64-tbl.h (aarch64_opcode_table): Flag sshll, sshll2, ushll and
- ushll2 with F_HAS_ALIAS. Add entries for sxtl, sxtl2, uxtl and uxtl2.
- * aarch64-asm.c (convert_xtl_to_shll): New function.
- (convert_to_real): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
- calling convert_xtl_to_shll.
- * aarch64-dis.c (convert_shll_to_xtl): New function.
- (convert_to_alias): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
- calling convert_shll_to_xtl.
- * aarch64-gen.c: Update copyright year.
- * aarch64-asm-2.c: Re-generate.
- * aarch64-dis-2.c: Re-generate.
- * aarch64-opc-2.c: Re-generate.
-
-2013-01-24 Nick Clifton <nickc@redhat.com>
-
- * v850-dis.c: Add support for e3v5 architecture.
- * v850-opc.c: Likewise.
-
-2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI.
- * aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise.
- * aarch64-opc.c (operand_general_constraint_met_p): For
- AARCH64_MOD_LSL, move the range check on the shift amount before the
- alignment check; change to call set_sft_amount_out_of_range_error
- instead of set_imm_out_of_range_error.
- * aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL.
- (aarch64_opcode_table): Remove the OP enumerator from the asimdimm
- 8-bit MOVI entry; change the 2nd operand from SIMD_IMM to
- SIMD_IMM_SFT.
-
-2013-01-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-gen.c (operand_type_init): Add OPERAND_TYPE_IMM32_64.
-
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
-2013-01-15 Nick Clifton <nickc@redhat.com>
-
- * v850-dis.c (get_operand_value): Sign extend V850E_IMMEDIATE
- values.
- * v850-opc.c (IMM16LO): Add V850_OPERAND_SIGNED attribute.
-
-2013-01-14 Will Newton <will.newton@imgtec.com>
-
- * metag-dis.c (REG_WIDTH): Increase to 64.
-
-2013-01-10 Peter Bergner <bergner@vnet.ibm.com>
-
- * ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries.
- * ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK,
- XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines.
- (SH6): Update.
- <"tabort.", "tabortdc.", "tabortdci.", "tabortwc.",
- "tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.",
- "treclaim.", "tsr.">: Add POWER8 HTM opcodes.
- <"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes.
-
-2013-01-10 Will Newton <will.newton@imgtec.com>
-
- * Makefile.am: Add Meta.
- * configure.in: Add Meta.
- * disassemble.c: Add Meta support.
- * metag-dis.c: New file.
- * Makefile.in: Regenerate.
- * configure: Regenerate.
-
-2013-01-07 Kaushik Phatak <kaushik.phatak@kpitcummins.com>
-
- * cr16-dis.c (make_instruction): Rename to cr16_make_instruction.
- (match_opcode): Rename to cr16_match_opcode.
-
-2013-01-04 Juergen Urban <JuergenUrban@gmx.de>
-
- * mips-dis.c: Add names for CP0 registers of r5900.
- * mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for
- instructions sq and lq.
- Add support for MIPS r5900 CPU.
- Add support for 128 bit MMI (Multimedia Instructions).
- Add support for EE instructions (Emotion Engine).
- Disable unsupported floating point instructions (64 bit and
- undefined compare operations).
- Enable instructions of MIPS ISA IV which are supported by r5900.
- Disable 64 bit co processor instructions.
- Disable 64 bit multiplication and division instructions.
- Disable instructions for co-processor 2 and 3, because these are
- not supported (preparation for later VU0 support (Vector Unit)).
- Disable cvt.w.s because this behaves like trunc.w.s and the
- correct execution can't be ensured on r5900.
- Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This
- will confuse less developers and compilers.
+ * po/opcodes.pot: Regenerate.
-2013-01-04 Yufeng Zhang <yufeng.zhang@arm.com>
+2014-01-30 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
+ Jan Beulich <jbeulich@suse.com>
- * aarch64-opc.c (aarch64_print_operand): Change to print
- AARCH64_OPND_IMM_MOV in hexadecimal in the instruction and in decimal
- in comment.
- * aarch64-tbl.h (aarch64_opcode_table): Remove the 'F_PSEUDO' flag
- from the opcode entries of OP_MOV_IMM_LOG, OP_MOV_IMM_WIDEN and
- OP_MOV_IMM_WIDE.
+ PR binutils/16490
+ * i386-dis.c (OP_E_memory): Fix shift computation for
+ vex_vsib_q_w_dq_mode.
-2013-01-04 Yufeng Zhang <yufeng.zhang@arm.com>
+2014-01-09 Bradley Nelson <bradnelson@google.com>
+ Roland McGrath <mcgrathr@google.com>
- * aarch64-opc.c (aarch64_prfops): Update to support PLIL1KEEP,
- PLIL1STRM, PLIL2KEEP, PLIL2STRM, PLIL3KEEP and PLIL3STRM.
+ * i386-dis.c (print_insn): Do not touch all_prefixes[-1] when
+ last_rex_prefix is -1.
-2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
+2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
- * i386-gen.c (process_copyright): Update copyright year to 2013.
+ * i386-gen.c (process_copyright): Update copyright year to 2014.
-2013-01-02 Kaushik Phatak <kaushik.phatak@kpitcummins.com>
+2014-01-03 Maciej W. Rozycki <macro@codesourcery.com>
- * cr16-dis.c (match_opcode,make_instruction): Remove static
- declaration.
- (dwordU,wordU): Moved typedefs to opcode/cr16.h
- (cr16_words,cr16_allWords,cr16_currInsn): Added prefix 'cr16_'.
+ * nds32-asm.c (parse_operand): Fix out-of-range integer constant.
-For older changes see ChangeLog-2012
+For older changes see ChangeLog-2013
\f
-Copyright (C) 2013 Free Software Foundation, Inc.
+Copyright (C) 2014 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright