+Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
+
+start-sanitize-fr30
+ * disassemble.c (disassembler): Add support for FR30 target.
+end-sanitize-fr30
+
+Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
+
+start-sanitize-cygnus
+ * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
+ CGEN_OPERAND_SEM_ONLY.
+end-sanitize-cygnus
+ * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
+start-sanitize-fr30
+ * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
+
+Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
+
+ * po/opcodes.pot: Regenerate.
+ * po/POTFILES.in: Regenerate.
+ * fr30-opc.c: Regenerate.
+ * fr30-opc.h: Regenerate.
+end-sanitize-fr30
+Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * m32r-asm.c: Regenerate.
+
+start-sanitize-fr30
+Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
+
+ * configure.in: Added case for bfd_fr30_arch.
+ * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
+ (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
+ (CLEANFILES): Added stamp-fr30.
+ (FR30_DEPS): Added.
+ * fr30-asm.c: New file.
+ * fr30-dis.c: New file.
+ * fr30-opc.c: New file.
+ * fr30-opc.h: New file.
+ * po/POTFILES.in: Regenerated
+ * po/opcodes.pot: Regenerated
+
+end-sanitize-fr30
+start-sanitize-m32rx
+Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
+ to bcl8,bncl8 entries.
+ (macro_insn_table_entries): Add FILL_SLOT attribute
+ to bcl8r,bncl8r entries.
+
+end-sanitize-m32rx
+Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
+
+ * configure.in: detect cygwin* instead of cygwin32*
+ * configure: regenerate
+
+Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
+
+ * mips-opc.c (IS_M): Added.
+
+start-sanitize-r5900
+Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+ * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
+ and masks.
+
+end-sanitize-r5900
+Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
+
+start-sanitize-cygnus
+ * cgen-asm.in (insert_1): New function.
+ (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
+ (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
+ (@arch@_cgen_assemble_insn): Update type of `buf' arg.
+ * cgen-dis.in (extract_1): New function.
+ (extract_normal): buf_ctrl renamed to ex_info, update type.
+ Progress on handling of CGEN_INT_INSN_P.
+ (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
+ Update handling of CGEN_INT_INSN_P. Handle errors from
+ @arch@_cgen_extract_operand.
+ (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
+ (default_print_insn): Renamed from print_insn.
+ Handle ! CGEN_INT_INSN_P.
+ (print_insn_@arch@): Handle error returns from print_insn.
+ * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
+ (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
+ (@arch@_cgen_lookup_get_insn_operands): Ditto.
+end-sanitize-cygnus
+ * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
+
+start-sanitize-am33
+Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Allow autoincrement stores using the same register
+ for source and destination operands.
+
+Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: DSP instrutions which only write to one general
+ register have no restrictions on matching operands.
+
+ * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
+
+end-sanitize-am33
+Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
+
+ * m32r-opc.h,m32r-opc.c: Regenerate.
+
+start-sanitize-am33
+Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
+
+end-sanitize-am33
+Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
+
+ * i386-dis.c (OP_3DNowSuffix): New static function.
+ (OPSUF): Define.
+ (GRP14): Define.
+ (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
+ (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
+ (insn_codep): New static variable.
+ (print_insn_x86): Init insn_codep after prefixes.
+ (grps): Add GRP14 entries for prefetch, prefetchw.
+ (OP_REG): Reformat.
+
+ From Jeff B Epler <jepler@usgs.gov>
+ * i386-dis.c (Suffix3DNow): New table.
+
+Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
+
+ * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
+
+Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
+
+ * d10v-dis.c (print_operand): If num is nonzero, then
+ add OPERAND_ACC1, not OPERAND_ACC0.
+
+Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
+
+ * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
+ insns.
+
Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
* d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
projects / deliverable / binutils-gdb.git / blobdiff