+Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c: Add some comments explaining the various
+ operands and such.
+
+ * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
+
+Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * m68k-dis.c (print_insn_arg): Handle new < and > operand
+ specifiers.
+
+ * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
+ operand specifiers in fmovm* instructions.
+
+Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * ppc-opc.c (insert_li): Give an error if the offset has the two
+ least significant bits set.
+
+Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (print_insn_mips16): Separate the instruction from
+ the arguments with a tab, not a space.
+
+Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-dis.c (disasemble): Finish conversion to '$' as
+ register prefix.
+
+ * mn10300-opc.c (mn10300_opcodes): Fix mask field for
+ mov am,(imm32,sp).
+
+Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Rebuild with autoconf 2.12.
+
+ Add support for mips16 (16 bit MIPS implementation):
+ * mips16-opc.c: New file.
+ * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
+ (mips16_reg_names): New static array.
+ (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
+ after seeing a 16 bit symbol.
+ (print_insn_little_mips): Likewise.
+ (print_insn_mips16): New static function.
+ (print_mips16_insn_arg): New static function.
+ * mips-opc.c: Add jalx instruction.
+ * Makefile.in (mips16-opc.o): New target.
+ * configure.in: Use mips16-opc.o for bfd_mips_arch.
+ * configure: Rebuild.
+
+Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
+
+ * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
+ operand specifiers in *save, *restore and movem* instructions.
+
+ * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
+ the coldfire.
+
+ * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
+ register operands for immediate arithmetic, not, neg, negx, and
+ set according to condition instructions.
+
+ * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
+ specifier of the effective-address operand in immediate forms of
+ arithmetic instructions. The specifier for the immediate operand
+ notes how and where the constant will be stored.
+
+Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
+ opcode.
+
+ * mn10300-dis.c (disassemble): Use '$' instead of '%' for
+ register prefix.
+
+ * mn10300-dis.c (disassemble): Prefix registers with '%'.
+
+Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-dis.c (disassemble): Handle register lists.
+
+ * mn10300-opc.c: Fix handling of register list operand for
+ "call", "ret", and "rets" instructions.
+
+ * mn10300-dis.c (disassemble): Print PC-relative and memory
+ addresses symbolically if possible.
+ * mn10300-opc.c: Distinguish between absolute memory addresses,
+ pc-relative offsets & random immediates.
+
+ * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
+ in 7 byte insns.
+ (disassemble): Handle SPLIT and EXTENDED operands.
+
+Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-dis.c: Rough cut at printing some operands.
+
+ * mn10300-dis.c: Start working on disassembler support.
+ * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
+
+ * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
+ list.
+ (mn10300_opcodes): Use REGS for register list in "movm" instructions.
+
+start-sanitize-d10v
+Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
+
+end-sanitize-d10v
+Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Demand parens around
+ register argument is calls and jmp instructions.
+
+Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
+ getx operand. Fix opcode for mulqu imm,dn.
+
+Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Hijack "bits" field
+ in MN10300_OPERAND_SPLIT operands for how many bits
+ appear in the basic insn word. Add IMM32_HIGH24,
+ IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
+ (mn10300_opcodes): Use new operands as needed.
+
+ * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
+ for bset, bclr, btst instructions.
+ (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
+
+ * mn10300-opc.c (mn10300_operands): Remove many redundant
+ operands. Update opcode table as appropriate.
+ (IMM32): Add MN10300_OPERAND_SPLIT flag.
+ (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
+
+Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
+ operands (for indexed load/stores). Fix bitpos for DI
+ operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
+ few instructions that insert immediates/displacements in the
+ middle of the instruction. Add IMM8E for 8 bit immediate in
+ the extended part of an instruction.
+ (mn10300_operands): Use new opcodes as appropriate.
+
+start-sanitize-d10v
+Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Declare the trap instruction
+ sequential so the assembler never parallelizes it with
+ other instructions.
+
+end-sanitize-d10v
+Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
+ a data/address register that appears in register field 0
+ and register field 1.
+ (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
+
+Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
+
+ * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
+ standard disassembly.
+
+ * alpha-opc.c (alpha_operands): Rearrange flags slot.
+ (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
+ Recategorize PALcode instructions.
+
+start-sanitize-v850
+Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_opcodes): Add relaxing "jbr".
+
+end-sanitize-v850
+Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
+ there are no operand types.
+
+start-sanitize-v850
+Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (D9_RELAX): Renamed from D9, all references
+ changed.
+ (v850_operands): Make sure D22 immediately follows D9_RELAX.
+
+end-sanitize-v850
+Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
+
start-sanitize-v850
Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
+ * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
+ and sst.w instructions.
+
* v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
"bCC"instructions).