-2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
-
- PR ld/13048
- * i386-dis.c (print_insn): Optimize info->mach check.
-
-2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/13046
- * i386-opc.tbl: Add Disp32S to 64bit call.
- * i386-tbl.h: Regenerated.
-
-2011-07-24 Chao-ying Fu <fu@mips.com>
- Maciej W. Rozycki <macro@codesourcery.com>
-
- * micromips-opc.c: New file.
- * mips-dis.c (micromips_to_32_reg_b_map): New array.
- (micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise.
- (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise.
- (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise.
- (micromips_to_32_reg_q_map): Likewise.
- (micromips_imm_b_map, micromips_imm_c_map): Likewise.
- (micromips_ase): New variable.
- (is_micromips): New function.
- (set_default_mips_dis_options): Handle microMIPS ASE.
- (print_insn_micromips): New function.
- (is_compressed_mode_p): Likewise.
- (_print_insn_mips): Handle microMIPS instructions.
- * Makefile.am (CFILES): Add micromips-opc.c.
- * configure.in (bfd_mips_arch): Add micromips-opc.lo.
- * Makefile.in: Regenerate.
- * configure: Regenerate.
+2012-11-08 Alan Modra <amodra@gmail.com>
- * mips-dis.c (micromips_to_32_reg_h_map): New variable.
- (micromips_to_32_reg_i_map): Likewise.
- (micromips_to_32_reg_m_map): Likewise.
- (micromips_to_32_reg_n_map): New macro.
+ * po/POTFILES.in: Regenerate.
-2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
+2012-11-05 Alan Modra <amodra@gmail.com>
- * mips-opc.c (NODS): New macro.
- (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
- (DSP_VOLA): Likewise.
- (mips_builtin_opcodes): Add NODS annotation to "deret" and
- "eret". Replace INSN_SYNC with NODS throughout. Use NODS in
- place of TRAP for "wait", "waiti" and "yield".
- * mips16-opc.c (NODS): New macro.
- (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
- (mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc",
- "restore" and "save".
+ * configure.in: Apply 2012-09-10 change to config.in here.
-2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
+2012-10-26 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
- * configure.in: Handle bfd_k1om_arch.
- * configure: Regenerated.
+ * s390-mkopc.c: Accept empty lines in s390-opc.txt.
+ * s390-opc.c: Add M_20OPT field. New instruction formats RRF_RURR2
+ and RRF_RMRR.
+ * s390-opc.txt: Add new instructions. New instruction type for lptea.
- * disassemble.c (disassembler): Handle bfd_k1om_arch.
+2012-10-26 Christian Groessler <chris@groessler.org>
- * i386-dis.c (print_insn): Handle bfd_mach_k1om and
- bfd_mach_k1om_intel_syntax.
+ * z8kgen.c (struct op): Fix encoding for translate opcodes (trdb,
+ trdrb, trib, trirb, trtdb, trtdrb, trtib, trtirb). Remove
+ non-existing opcode trtrb.
+ * z8k-opc.h: Regenerate.
- * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to
- ~(CpuL1OM|CpuK1OM). Add CPU_K1OM_FLAGS.
- (cpu_flags): Add CpuK1OM.
+2012-10-26 Alan Modra <amodra@gmail.com>
- * i386-opc.h (CpuK1OM): New.
- (i386_cpu_flags): Add cpuk1om.
+ * ppc-opc (powerpc_opcodes): "lfdp" and "stfdp" use DS offset.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
+2012-10-24 Roland McGrath <mcgrathr@google.com>
-2011-07-12 Nick Clifton <nickc@redhat.com>
+ * i386-dis.c (ckprefix): When bailing out for fwait with prefixes,
+ set rex_used to rex.
- * arm-dis.c (print_insn_arm): Revert previous, undocumented,
- accidental change.
+2012-10-22 Peter Bergner <bergner@vnet.ibm.com>
-2011-07-01 Nick Clifton <nickc@redhat.com>
+ * ppc-opc.c (powerpc_opcodes) <vcfpsxws>: Fix opcode spelling.
- PR binutils/12329
- * avr-dis.c (avr_operand): Fix disassembly of ELPM, LPM and SPM
- insns using post-increment addressing.
+2012-10-18 Tom Tromey <tromey@redhat.com>
-2011-06-30 H.J. Lu <hongjiu.lu@intel.com>
+ * tic54x-dis.c (print_instruction): Don't use K&R style.
+ (print_parallel_instruction, sprint_dual_address)
+ (sprint_indirect_address, sprint_direct_address, sprint_mmr)
+ (sprint_cc2, sprint_condition): Likewise.
- * i386-dis.c (vex_len_table): Update rorxS.
+2012-10-18 Kai Tietz <ktietz@redhat.com>
-2011-06-30 H.J. Lu <hongjiu.lu@intel.com>
+ * aarch64-asm.c (aarch64_ins_ldst_reglist): Initialize
+ value with a default.
+ (do_special_encoding): Likewise.
+ (aarch64_ins_ldst_elemlist): Pre-initialize QSsize, and opcodeh2
+ variables with default.
+ * arc-dis.c (write_comments_): Don't use strncat due
+ size of state->commentBuffer pointer isn't predictable.
- AVX Programming Reference (June, 2011)
- * i386-dis.c (vex_len_table): Correct rorxS.
+2012-10-15 Yufeng Zhang <yufeng.zhang@arm.com>
- * i386-opc.tbl: Correct rorx.
- * i386-tbl.h: Regenerated.
+ * aarch64-opc.c (aarch64_sys_regs): Add rmr_el1, rmr_el2 and
+ rmr_el3; remove daifset and daifclr.
-2011-06-29 H.J. Lu <hongjiu.lu@intel.com>
+2012-10-15 Yufeng Zhang <yufeng.zhang@arm.com>
- * tilegx-opc.c (find_opcode): Replace "index" with "i".
- * tilepro-opc.c (find_opcode): Likewise.
+ * aarch64-opc.c (operand_general_constraint_met_p): Change to check
+ the alignment of addr.offset.imm instead of that of shifter.amount for
+ operand type AARCH64_OPND_ADDR_UIMM12.
-2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
+2012-10-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
- * mips16-opc.c (jalrc, jrc): Move earlier in file.
+ * arm-dis.c: Use preferred form of vrint instruction variants
+ for disassembly.
-2011-06-21 H.J. Lu <hongjiu.lu@intel.com>
+2012-10-09 Nagajyothi Eggone <nagajyothi.eggone@amd.com>
- * i386-dis.c (prefix_table): Re-indent PREFIX_VEX_0F388C and
- PREFIX_VEX_0F388E.
+ * i386-gen.c (cpu_flag_init): Add CPU_BDVER3_FLAGS.
+ * i386-init.h: Regenerated.
-2011-06-17 Andreas Schwab <schwab@redhat.com>
+2012-10-05 Peter Bergner <bergner@vnet.ibm.com>
- * Makefile.am (MAINTAINERCLEANFILES): Move s390-opc.tab ...
- (MOSTLYCLEANFILES): ... here.
- * Makefile.in: Regenerate.
+ * ppc-dis.c (ppc_opts) <altivec>: Use PPC_OPCODE_ALTIVEC2;
+ * ppc-opc.c (VBA): New define.
+ (powerpc_opcodes) <vcuxwfp, vcsxwfp, vcfpuxws, vcfpsxsw, vmr, vnot,
+ mfppr, mfppr32, mtppr, mtppr32>: New extended mnemonics.
-2011-06-14 Alan Modra <amodra@gmail.com>
+2012-10-04 Nick Clifton <nickc@redhat.com>
- * Makefile.in: Regenerate.
+ * v850-dis.c (disassemble): Place square parentheses around second
+ register operand of clr1, not1, set1 and tst1 instructions.
-2011-06-13 Walter Lee <walt@tilera.com>
+2012-10-04 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
- * Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c,
- tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c.
- * Makefile.in: Regenerate.
- * configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch.
- * configure: Regenerate.
- * disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro.
- * po/POTFILES.in: Regenerate.
- * tilegx-dis.c: New file.
- * tilegx-opc.c: New file.
- * tilepro-dis.c: New file.
- * tilepro-opc.c: New file.
-
-2011-06-10 H.J. Lu <hongjiu.lu@intel.com>
-
- AVX Programming Reference (June, 2011)
- * i386-dis.c (XMGatherQ): New.
- * i386-dis.c (EXxmm_mb): New.
- (EXxmm_mb): Likewise.
- (EXxmm_mw): Likewise.
- (EXxmm_md): Likewise.
- (EXxmm_mq): Likewise.
- (EXxmmdw): Likewise.
- (EXxmmqd): Likewise.
- (VexGatherQ): Likewise.
- (MVexVSIBDWpX): Likewise.
- (MVexVSIBQWpX): Likewise.
- (xmm_mb_mode): Likewise.
- (xmm_mw_mode): Likewise.
- (xmm_md_mode): Likewise.
- (xmm_mq_mode): Likewise.
- (xmmdw_mode): Likewise.
- (xmmqd_mode): Likewise.
- (ymmxmm_mode): Likewise.
- (vex_vsib_d_w_dq_mode): Likewise.
- (vex_vsib_q_w_dq_mode): Likewise.
- (MOD_VEX_0F385A_PREFIX_2): Likewise.
- (MOD_VEX_0F388C_PREFIX_2): Likewise.
- (MOD_VEX_0F388E_PREFIX_2): Likewise.
- (PREFIX_0F3882): Likewise.
- (PREFIX_VEX_0F3816): Likewise.
- (PREFIX_VEX_0F3836): Likewise.
- (PREFIX_VEX_0F3845): Likewise.
- (PREFIX_VEX_0F3846): Likewise.
- (PREFIX_VEX_0F3847): Likewise.
- (PREFIX_VEX_0F3858): Likewise.
- (PREFIX_VEX_0F3859): Likewise.
- (PREFIX_VEX_0F385A): Likewise.
- (PREFIX_VEX_0F3878): Likewise.
- (PREFIX_VEX_0F3879): Likewise.
- (PREFIX_VEX_0F388C): Likewise.
- (PREFIX_VEX_0F388E): Likewise.
- (PREFIX_VEX_0F3890..PREFIX_VEX_0F3893): Likewise.
- (PREFIX_VEX_0F38F5): Likewise.
- (PREFIX_VEX_0F38F6): Likewise.
- (PREFIX_VEX_0F3A00): Likewise.
- (PREFIX_VEX_0F3A01): Likewise.
- (PREFIX_VEX_0F3A02): Likewise.
- (PREFIX_VEX_0F3A38): Likewise.
- (PREFIX_VEX_0F3A39): Likewise.
- (PREFIX_VEX_0F3A46): Likewise.
- (PREFIX_VEX_0F3AF0): Likewise.
- (VEX_LEN_0F3816_P_2): Likewise.
- (VEX_LEN_0F3819_P_2): Likewise.
- (VEX_LEN_0F3836_P_2): Likewise.
- (VEX_LEN_0F385A_P_2_M_0): Likewise.
- (VEX_LEN_0F38F5_P_0): Likewise.
- (VEX_LEN_0F38F5_P_1): Likewise.
- (VEX_LEN_0F38F5_P_3): Likewise.
- (VEX_LEN_0F38F6_P_3): Likewise.
- (VEX_LEN_0F38F7_P_1): Likewise.
- (VEX_LEN_0F38F7_P_2): Likewise.
- (VEX_LEN_0F38F7_P_3): Likewise.
- (VEX_LEN_0F3A00_P_2): Likewise.
- (VEX_LEN_0F3A01_P_2): Likewise.
- (VEX_LEN_0F3A38_P_2): Likewise.
- (VEX_LEN_0F3A39_P_2): Likewise.
- (VEX_LEN_0F3A46_P_2): Likewise.
- (VEX_LEN_0F3AF0_P_3): Likewise.
- (VEX_W_0F3816_P_2): Likewise.
- (VEX_W_0F3818_P_2): Likewise.
- (VEX_W_0F3819_P_2): Likewise.
- (VEX_W_0F3836_P_2): Likewise.
- (VEX_W_0F3846_P_2): Likewise.
- (VEX_W_0F3858_P_2): Likewise.
- (VEX_W_0F3859_P_2): Likewise.
- (VEX_W_0F385A_P_2_M_0): Likewise.
- (VEX_W_0F3878_P_2): Likewise.
- (VEX_W_0F3879_P_2): Likewise.
- (VEX_W_0F3A00_P_2): Likewise.
- (VEX_W_0F3A01_P_2): Likewise.
- (VEX_W_0F3A02_P_2): Likewise.
- (VEX_W_0F3A38_P_2): Likewise.
- (VEX_W_0F3A39_P_2): Likewise.
- (VEX_W_0F3A46_P_2): Likewise.
- (MOD_VEX_0F3818_PREFIX_2): Removed.
- (MOD_VEX_0F3819_PREFIX_2): Likewise.
- (VEX_LEN_0F60_P_2..VEX_LEN_0F6D_P_2): Likewise.
- (VEX_LEN_0F70_P_1..VEX_LEN_0F76_P_2): Likewise.
- (VEX_LEN_0FD1_P_2..VEX_LEN_0FD5_P_2): Likewise.
- (VEX_LEN_0FD7_P_2_M_1..VEX_LEN_0F3819_P_2_M_0): Likewise.
- (VEX_LEN_0F381C_P_2..VEX_LEN_0F3840_P_2): Likewise.
- (VEX_LEN_0F3A0E_P_2): Likewise.
- (VEX_LEN_0F3A0F_P_2): Likewise.
- (VEX_LEN_0F3A42_P_2): Likewise.
- (VEX_LEN_0F3A4C_P_2): Likewise.
- (VEX_W_0F3818_P_2_M_0): Likewise.
- (VEX_W_0F3819_P_2_M_0): Likewise.
- (prefix_table): Updated.
- (three_byte_table): Likewise.
- (vex_table): Likewise.
- (vex_len_table): Likewise.
- (vex_w_table): Likewise.
- (mod_table): Likewise.
- (putop): Handle "LW".
- (intel_operand_size): Handle xmm_mb_mode, xmm_mw_mode,
- xmm_md_mode, xmm_mq_mode, xmmdw_mode, xmmqd_mode, ymmxmm_mode,
- vex_vsib_d_w_dq_mode, vex_vsib_q_w_dq_mode.
- (OP_EX): Likewise.
- (OP_E_memory): Handle vex_vsib_d_w_dq_mode and
- vex_vsib_q_w_dq_mode.
- (OP_XMM): Handle vex_vsib_q_w_dq_mode.
- (OP_VEX): Likewise.
-
- * i386-gen.c (cpu_flag_init): Add CpuAVX2 to CPU_ANY_SSE_FLAGS
- and CPU_ANY_AVX_FLAGS. Add CPU_BMI2_FLAGS, CPU_LZCNT_FLAGS,
- CPU_INVPCID_FLAGS and CPU_AVX2_FLAGS.
- (cpu_flags): Add CpuAVX2, CpuBMI2, CpuLZCNT and CpuINVPCID.
- (opcode_modifiers): Add VecSIB.
-
- * i386-opc.h (CpuAVX2): New.
- (CpuBMI2): Likewise.
- (CpuLZCNT): Likewise.
- (CpuINVPCID): Likewise.
- (VecSIB128): Likewise.
- (VecSIB256): Likewise.
- (VecSIB): Likewise.
- (i386_cpu_flags): Add cpuavx2, cpubmi2, cpulzcnt and cpuinvpcid.
- (i386_opcode_modifier): Add vecsib.
-
- * i386-opc.tbl: Add invpcid, AVX2 and BMI2 instructions.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
+ * s390-mkopc.c: Support new option zEC12.
+ * s390-opc.c: Add new instruction formats.
+ * s390-opc.txt: Add new instructions for zEC12.
-2011-06-03 Quentin Neill <quentin.neill@amd.com>
+2012-09-27 Anthony Green <green@moxielogic.com>
- * i386-gen.c (cpu_flag_init): Add CpuF16C to CPU_BDVER2_FLAGS.
+ * moxie-dis.c (print_insn_moxie): Print 'bad' instructions.
+ * moxie-opc.c: All 'bad' instructions have the itype MOXIE_BAD.
+
+2012-09-25 Saravanan Ekanathan <saravanan.ekanathan@amd.com>
+
+ * i386-gen.c (cpu_flag_init): Add missing Cpu flags in
+ CPU_BDVER1_FLAGS, CPU_BDVER2_FLAGS, CPU_BTVER1_FLAGS
+ and CPU_BTVER2_FLAGS.
* i386-init.h: Regenerated.
-2011-06-03 Nick Clifton <nickc@redhat.com>
+2012-09-20 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
- PR binutils/12752
- * arm-dis.c (print_insn_coprocessor): Use bfd_vma type for
- computing address offsets.
- (print_arm_address): Likewise.
- (print_insn_arm): Likewise.
- (print_insn_thumb16): Likewise.
- (print_insn_thumb32): Likewise.
+ * i386-gen.c (cpu_flag_init): Add CpuCX16 to CPU_NOCONA_FLAGS,
+ CPU_CORE_FLAGS, CPU_CORE2_FLAGS, CPU_COREI7_FLAGS,
+ CPU_BDVER1_FLAGS, CPU_BDVER2_FLAGS, CPU_BTVER1_FLAGS,
+ CPU_BTVER2_FLAGS. Add CPU_CX16_FLAGS.
+ (cpu_flags): Add CpuCX16.
+ * i386-opc.h (CpuCX16): New.
+ (i386_cpu_flags): Add cpucx16.
+ * i386-opc.tbl: Replace CpuSSE3 with CpuCX16 for cmpxchg16b.
+ * i386-tbl.h: Regenerate.
+ * i386-init.h: Likewise.
-2011-06-02 Jie Zhang <jie@codesourcery.com>
- Nathan Sidwell <nathan@codesourcery.com>
- Maciej Rozycki <macro@codesourcery.com>
+2012-09-18 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
- * arm-dis.c (print_insn_coprocessor): Explicitly print #-0
- as address offset.
- (print_arm_address): Likewise. Elide positive #0 appropriately.
- (print_insn_arm): Likewise.
+ * arm-dis.c: Changed ldra and strl-form mnemonics
+ to lda and stl-form.
-2011-06-02 Nick Clifton <nickc@redhat.com>
+2012-09-18 Chao-ying Fu <fu@mips.com>
- PR gas/12752
- * arm-dis.c (print_insn_thumb32): Do not sign extend addresses
- passed to print_address_func.
+ * micromips-opc.c (micromips_opcodes): Correct the encoding of
+ the "swxc1" instruction.
-2011-06-02 Nick Clifton <nickc@redhat.com>
+2012-09-17 Yufeng Zhang <yufeng.zhang@arm.com>
- * arm-dis.c: Fix spelling mistakes.
- * op/opcodes.pot: Regenerate.
+ * aarch64-asm.c (aarch64_ins_imm_half): Remove ATTRIBUTE_UNUSED from
+ the parameter 'inst'.
+ (aarch64_ins_addr_simm): Add ATTRIBUTE_UNUSED to the parameter 'inst'.
+ (convert_mov_to_movewide): Change to assert (0) when
+ aarch64_wide_constant_p returns FALSE.
-2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+2012-09-14 David Edelsohn <dje.gcc@gmail.com>
- * s390-opc.c: Replace S390_OPERAND_REG_EVEN with
- S390_OPERAND_REG_PAIR. Fix INSTR_RRF_0UFEF instruction type.
- * s390-opc.txt: Fix cxr instruction type.
+ * configure: Regenerate.
-2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+2012-09-14 Anthony Green <green@moxielogic.com>
- * s390-opc.c: Add new instruction types marking register pair
- operands.
- * s390-opc.txt: Match instructions having register pair operands
- to the new instruction types.
+ * moxie-dis.c (print_insn_moxie): Branch targets are relative to
+ the address after the branch instruction.
-2011-05-19 Nick Clifton <nickc@redhat.com>
+2012-09-13 Anthony Green <green@moxielogic.com>
- * v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
- operands.
+ * moxie-dis.c (print_insn_moxie): Handle bi-endian encodings.
-2011-05-10 Quentin Neill <quentin.neill@amd.com>
+2012-09-10 Matthias Klose <doko@ubuntu.com>
- * i386-gen.c (cpu_flag_init): Add new CPU_BDVER2_FLAGS.
- * i386-init.h: Regenerated.
+ * config.in: Disable sanity check for kfreebsd.
-2011-04-27 Nick Clifton <nickc@redhat.com>
+2012-09-10 H.J. Lu <hongjiu.lu@intel.com>
- * po/da.po: Updated Danish translation.
+ * configure: Regenerated.
-2011-04-26 Anton Blanchard <anton@samba.org>
+2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
- * ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.
+ * ia64-asmtab.h (completer_index): Extend bitfield to full uint.
+ * ia64-gen.c: Promote completer index type to longlong.
+ (irf_operand): Add new register recognition.
+ (in_iclass_mov_x): Add an entry for the new mov_* instruction type.
+ (lookup_specifier): Add new resource recognition.
+ (insert_bit_table_ent): Relax abort condition according to the
+ changed completer index type.
+ (print_dis_table): Fix printf format for completer index.
+ * ia64-ic.tbl: Add a new instruction class.
+ * ia64-opc-i.c (ia64_opcodes_i): Define new I-instructions.
+ * ia64-opc-m.c (ia64_opcodes_m): Define new M-instructions.
+ * ia64-opc.h: Define short names for new operand types.
+ * ia64-raw.tbl: Add new RAW resource for DAHR register.
+ * ia64-waw.tbl: Add new WAW resource for DAHR register.
+ * ia64-asmtab.c: Regenerate.
-2011-04-21 DJ Delorie <dj@redhat.com>
+2012-08-29 Peter Bergner <bergner@vnet.ibm.com>
- * rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs.
- * rx-decode.c: Regenerate.
+ * ppc-opc.c (VXASHB_MASK): New define.
+ (powerpc_opcodes) <vsldoi>: Use VXASHB_MASK.
-2011-04-20 H.J. Lu <hongjiu.lu@intel.com>
+2012-08-28 Peter Bergner <bergner@vnet.ibm.com>
- * i386-init.h: Regenerated.
+ * ppc-opc.c (UIMM4, UIMM3, UIMM2, VXVA_MASK, VXVB_MASK, VXVAVB_MASK,
+ VXVDVA_MASK, VXUIMM4_MASK, VXUIMM3_MASK, VXUIMM2_MASK): New defines.
+ (powerpc_opcodes) <vexptefp, vlogefp, vrefp, vrfim, vrfin, vrfip,
+ vrfiz, vrsqrtefp, vupkhpx, vupkhsb, vupkhsh, vupklpx, vupklsb,
+ vupklsh>: Use VXVA_MASK.
+ <vspltisb, vspltish, vspltisw>: Use VXVB_MASK.
+ <mfvscr>: Use VXVAVB_MASK.
+ <mtvscr>: Use VXVDVA_MASK.
+ <vspltb>: Use VXUIMM4_MASK.
+ <vsplth>: Use VXUIMM3_MASK.
+ <vspltw>: Use VXUIMM2_MASK.
+
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-04-19 Quentin Neill <quentin.neill@amd.com>
+ * arm-dis.c (neon_opcodes): Add 2 operand sha instructions.
- * i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits
- from bdver1 flags.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-04-13 Nick Clifton <nickc@redhat.com>
+ * arm-dis.c (neon_opcodes): Add SHA 3-operand instructions.
- * v850-dis.c (disassemble): Always print a closing square brace if
- an opening square brace was printed.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-04-12 Nick Clifton <nickc@redhat.com>
+ * arm-dis.c (neon_opcodes): Handle VMULL.P64.
- PR binutils/12534
- * arm-dis.c (thumb32_opcodes): Add %L suffix to LDRD and STRD insn
- patterns.
- (print_insn_thumb32): Handle %L.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-04-11 Julian Brown <julian@codesourcery.com>
+ * arm-dis.c (neon_opcodes): Add support for AES instructions.
- * arm-dis.c (psr_name): Fix typo for BASEPRI_MAX.
- (print_insn_thumb32): Add APSR bitmask support.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-04-07 Paul Carroll<pcarroll@codesourcery.com>
+ * arm-dis.c (coprocessor_opcodes): Add support for HP/DP
+ conversions.
- * arm-dis.c (print_insn): init vars moved into private_data structure.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-03-24 Mike Frysinger <vapier@gentoo.org>
+ * arm-dis.c (coprocessor_opcodes): Add VRINT.
+ (neon_opcodes): Likewise.
- * bfin-dis.c (decode_dsp32mac_0): Move MM zeroing down to MAC0 logic.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
+ * arm-dis.c (coprocessor_opcodes): Add support for new VCVT
+ variants.
+ (neon_opcodes): Likewise.
- * avr-dis.c (avr_operand): Add opcode_str parameter. Check for
- post-increment to support LPM Z+ instruction. Add support for 'E'
- constraint for DES instruction.
- (print_insn_avr): Adjust calls to avr_operand. Rename variable.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
+ * arm-dis.c (coprocessor_opcodes): Add VMAXNM/VMINNM.
+ (neon_opcodes): Likewise.
- * arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
+ * arm-dis.c (coprocessor_opcodes): Add VSEL.
+ (print_insn_coprocessor): Add new %<>c bitfield format
+ specifier.
- * arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
- Use branch types instead.
- (print_insn): Likewise.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
+ * arm-dis.c (arm_opcodes): Add LDRA/STRL instructions.
+ (thumb32_opcodes): Likewise.
+ (print_arm_insn): Add support for %<>T formatter.
- * mips-opc.c (mips_builtin_opcodes): Correct register use
- annotation of "alnv.ps".
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
+ * arm-dis.c (arm_opcodes): Add HLT.
+ (thumb_opcodes): Likewise.
- * mips-opc.c (mips_builtin_opcodes): Add "pref" macro.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-02-22 Mike Frysinger <vapier@gentoo.org>
+ * arm-dis.c (thumb32_opcodes): Add DCPS instruction.
- * bfin-dis.c (OUTS): Remove p NULL check and txt NUL check.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-02-22 Mike Frysinger <vapier@gentoo.org>
+ * arm-dis.c (arm_opcodes): Add SEVL.
+ (thumb_opcodes): Likewise.
+ (thumb32_opcodes): Likewise.
- * bfin-dis.c (print_insn_bfin): Change outf->fprintf_func to OUTS.
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
-2011-02-19 Mike Frysinger <vapier@gentoo.org>
+ * arm-dis.c (data_barrier_option): New function.
+ (print_insn_arm): Use data_barrier_option.
+ (print_insn_thumb32): Use data_barrier_option.
- * bfin-dis.c (saved_state): Mark static. Change a[01]x to ax[] and
- a[01]w to aw[]. Delete ac0, ac0_copy, ac1, an, aq, av0, av0s, av1,
- av1s, az, cc, v, v_copy, vs, rnd_mod, v_internal, pc, ticks, insts,
- exception, end_of_registers, msize, memory, bfd_mach.
- (CCREG, PCREG, A0XREG, A0WREG, A1XREG, A1WREG, LC0REG, LT0REG,
- LB0REG, LC1REG, LT1REG, LB1REG): Delete
- (AXREG, AWREG, LCREG, LTREG, LBREG): Define.
- (get_allreg): Change to new defines. Fallback to abort().
+2012-08-24 Matthew Gretton-Dann <matthew.gretton-dann@arm.com
-2011-02-14 Mike Frysinger <vapier@gentoo.org>
+ * arm-dis.c (COND_UNCOND): New constant.
+ (print_insn_coprocessor): Add support for %u format specifier.
+ (print_insn_neon): Likewise.
- * bfin-dis.c: Add whitespace/parenthesis where needed.
+2012-08-21 David S. Miller <davem@davemloft.net>
-2011-02-14 Mike Frysinger <vapier@gentoo.org>
+ * sparc-opc.c (4-argument crypto instructions): Fix encoding using
+ F3F4 macro.
- * bfin-dis.c (decode_LoopSetup_0): Return when reg is greater
- than 7.
+2012-08-20 Edmar Wienskoski <edmar@freescale.com>
-2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+ * ppc-opc.c (powerpc_opcodes): Changed opcode for vabsdub,
+ vabsduh, vabsduw, mviwsplt.
+2012-08-17 Nagajyothi Eggone <nagajyothi.eggone@amd.com>
+
+ * i386-gen.c (cpu_flag_init): Add CPU_BTVER1_FLAGS and
+ CPU_BTVER2_FLAGS.
+
+ * i386-opc.h: Update CpuPRFCHW comment.
+
+ * i386-opc.tbl: Enable prefetch instruction for CpuPRFCHW.
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Likewise.
+
+2012-08-17 Nick Clifton <nickc@redhat.com>
+
+ * po/uk.po: New Ukranian translation.
+ * configure.in (ALL_LINGUAS): Add uk.
* configure: Regenerate.
-2011-02-13 Mike Frysinger <vapier@gentoo.org>
+2012-08-16 Peter Bergner <bergner@vnet.ibm.com>
+
+ * ppc-opc.c (powerpc_opcodes) <"lswx">: Use RAX for the second and
+ RBX for the third operand.
+ <"lswi">: Use RAX for second and NBI for the third operand.
+
+2012-08-15 DJ Delorie <dj@redhat.com>
+
+ * rl78-decode.opc (rl78_decode_opcode): Merge %e and %[01]
+ operands, so that data addresses can be corrected when not
+ ES-overridden.
+ * rl78-decode.c: Regenerate.
+ * rl78-dis.c (print_insn_rl78): Make order of modifiers
+ irrelevent. When the 'e' specifier is used on an operand and no
+ ES prefix is provided, adjust address to make it absolute.
+
+2012-08-15 Peter Bergner <bergner@vnet.ibm.com>
- * bfin-dis.c (decode_dsp32alu_0): Fix typo with A1 reg.
+ * ppc-opc.c <RSQ, RTQ>: Use PPC_OPERAND_GPR.
-2011-02-13 Mike Frysinger <vapier@gentoo.org>
+2012-08-15 Peter Bergner <bergner@vnet.ibm.com>
- * bfin-dis.c (decode_dsp32mult_0): Add 1 to dst for mac1. Output
- dregs only when P is set, and dregs_lo otherwise.
+ * ppc-opc.c <xnop, yield, mdoio, mdoom>: New extended mnemonics.
-2011-02-13 Mike Frysinger <vapier@gentoo.org>
+2012-08-14 Maciej W. Rozycki <macro@codesourcery.com>
- * bfin-dis.c (decode_dsp32alu_0): Delete BYTEOP2M code.
+ * mips-dis.c (print_insn_args): Add GET_OP and GET_OP_S local
+ macros, use local variables for info struct member accesses,
+ update the type of the variable used to hold the instruction
+ word.
+ (print_insn_mips, print_mips16_insn_arg): Likewise.
+ (print_insn_mips16): Add GET_OP and GET_OP_S local macros, use
+ local variables for info struct member accesses.
+ (print_insn_micromips): Add GET_OP_S local macro.
+ (_print_insn_mips): Update the type of the variable used to hold
+ the instruction word.
-2011-02-12 Mike Frysinger <vapier@gentoo.org>
+2012-08-13 Ian Bolton <ian.bolton@arm.com>
+ Laurent Desnogues <laurent.desnogues@arm.com>
+ Jim MacArthur <jim.macarthur@arm.com>
+ Marcus Shawcroft <marcus.shawcroft@arm.com>
+ Nigel Stephens <nigel.stephens@arm.com>
+ Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
+ Richard Earnshaw <rearnsha@arm.com>
+ Sofiane Naci <sofiane.naci@arm.com>
+ Tejas Belagod <tejas.belagod@arm.com>
+ Yufeng Zhang <yufeng.zhang@arm.com>
- * bfin-dis.c (decode_pseudoDEBUG_0): Add space after PRNT.
+ * Makefile.am: Add AArch64.
+ * Makefile.in: Regenerate.
+ * aarch64-asm.c: New file.
+ * aarch64-asm.h: New file.
+ * aarch64-dis.c: New file.
+ * aarch64-dis.h: New file.
+ * aarch64-gen.c: New file.
+ * aarch64-opc.c: New file.
+ * aarch64-opc.h: New file.
+ * aarch64-tbl.h: New file.
+ * configure.in: Add AArch64.
+ * configure: Regenerate.
+ * disassemble.c: Add AArch64.
+ * aarch64-asm-2.c: New file (automatically generated).
+ * aarch64-dis-2.c: New file (automatically generated).
+ * aarch64-opc-2.c: New file (automatically generated).
+ * po/POTFILES.in: Regenerate.
-2011-02-12 Mike Frysinger <vapier@gentoo.org>
+2012-08-13 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * micromips-opc.c (micromips_opcodes): Update comment.
+ * mips-opc.c (mips_builtin_opcodes): Likewise. Mark coprocessor
+ instructions for IOCT as appropriate.
+ * mips-dis.c (print_insn_mips): Replace OPCODE_IS_MEMBER with
+ opcode_is_member.
+ * configure.in: Substitute NO_WMISSING_FIELD_INITIALIZERS with
+ the result of a check for the -Wno-missing-field-initializers
+ GCC option.
+ * Makefile.am (NO_WMISSING_FIELD_INITIALIZERS): New variable.
+ (mips-opc.lo): Pass $(NO_WMISSING_FIELD_INITIALIZERS) to
+ compilation.
+ (mips16-opc.lo): Likewise.
+ (micromips-opc.lo): Likewise.
+ * aclocal.m4: Regenerate.
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
- * bfin-dis.c (machine_registers): Delete REG_GP.
- (reg_names): Delete "GP".
- (decode_allregs): Change REG_GP to REG_LASTREG.
+2012-08-11 Saravanan Ekanathan <saravanan.ekanathan@amd.com>
-2011-02-12 Mike Frysinger <vapier@gentoo.org>
+ PR gas/14423
+ * i386-gen.c (cpu_flag_init): Add CpuFMA in CPU_BDVER2_FLAGS.
+ * i386-init.h: Regenerated.
- * bfin-dis.c (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2,
- M_IH, M_IU): Delete.
+2012-08-09 Nick Clifton <nickc@redhat.com>
-2011-02-11 Mike Frysinger <vapier@gentoo.org>
+ * po/vi.po: Updated Vietnamese translation.
- * bfin-dis.c (reg_names): Add const.
- (decode_dregs_lo, decode_dregs_hi, decode_dregs, decode_dregs_byte,
- decode_pregs, decode_iregs, decode_mregs, decode_dpregs, decode_gregs,
- decode_regs, decode_regs_lo, decode_regs_hi, decode_statbits,
- decode_counters, decode_allregs): Likewise.
+2012-08-07 Roland McGrath <mcgrathr@google.com>
-2011-02-09 Michael Snyder <msnyder@vmware.com>
+ * i386-dis.c (reg_table): Fill out REG_0F0D table with
+ AMD-reserved cases as "prefetch".
+ (MOD_0F18_REG_4, MOD_0F18_REG_5): New enum constants.
+ (MOD_0F18_REG_6, MOD_0F18_REG_7): Likewise.
+ (reg_table): Use those under REG_0F18.
+ (mod_table): Add those cases as "nop/reserved".
- * i386-dis.c (OP_J): Parenthesize expression to prevent
- truncated addresses.
- (print_insn): Fix indentation off-by-one.
+2012-08-07 Jan Beulich <jbeulich@suse.com>
-2011-02-01 Nick Clifton <nickc@redhat.com>
+ * i386-opc.tbl: Remove "FIXME" comments from SVME instructions.
- * po/da.po: Updated Danish translation.
+2012-08-06 Roland McGrath <mcgrathr@google.com>
-2011-01-21 Dave Murphy <davem@devkitpro.org>
+ * i386-dis.c (print_insn): Print spaces between multiple excess
+ prefixes. Return actual number of excess prefixes consumed,
+ not always one.
- * ppc-opc.c (NON32, NO371): Remove PPC_OPCODE_PPCPS.
+ * i386-dis.c (OP_REG): Ignore REX_B for segment register cases.
-2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
+2012-08-06 Roland McGrath <mcgrathr@google.com>
+ Victor Khimenko <khim@google.com>
+ H.J. Lu <hongjiu.lu@intel.com>
- * i386-dis.c (sIbT): New.
- (b_T_mode): Likewise.
- (dis386): Replace sIb with sIbT on "pushT".
- (x86_64_table): Replace sIb with Ib on "aam" and "aad".
- (OP_sI): Handle b_T_mode. Properly sign-extend byte.
+ * i386-dis.c (OP_sI): In b_T_mode and v_mode, REX_W trumps DFLAG.
+ (putop): For 'T', 'U', and 'V', treat REX_W like DFLAG.
+ (intel_operand_size): For stack_v_mode, treat REX_W like DFLAG.
+ (OP_E_register): Likewise.
+ (OP_REG): For low 8 whole registers, treat REX_W like DFLAG.
-2011-01-18 Jan Kratochvil <jan.kratochvil@redhat.com>
+2012-08-02 Jan-Benedict Glaw <jbglaw@lug-owl.de>
- * i386-init.h: Regenerated.
- * i386-tbl.h: Regenerated
+ * configure.in: Formatting.
+ * configure: Regenerate.
+
+2012-08-01 Alan Modra <amodra@gmail.com>
+
+ * h8300-dis.c: Fix printf arg warnings.
+ * i960-dis.c: Likewise.
+ * mips-dis.c: Likewise.
+ * pdp11-dis.c: Likewise.
+ * sh-dis.c: Likewise.
+ * v850-dis.c: Likewise.
+ * configure.in: Formatting.
+ * configure: Regenerate.
+ * rl78-decode.c: Regenerate.
+ * po/POTFILES.in: Regenerate.
+
+2012-07-31 Chao-Ying Fu <fu@mips.com>
+ Catherine Moore <clm@codesourcery.com>
+ Maciej W. Rozycki <macro@codesourcery.com>
+
+ * micromips-opc.c (WR_a, RD_a, MOD_a): New macros.
+ (DSP_VOLA): Likewise.
+ (D32, D33): Likewise.
+ (micromips_opcodes): Add DSP ASE instructions.
+ * mips-dis.c (print_insn_micromips) <'2', '3'>: New cases.
+ <'4', '5', '6', '7', '8', '0', '^', '@'>: Likewise.
+
+2012-07-31 Jan Beulich <jbeulich@suse.com>
+
+ * i386-opc.tbl (vmovntdqa): Move up into 256-bit integer AVX2
+ instruction group. Mark as requiring AVX2.
+ * i386-tbl.h: Re-generate.
-2011-01-17 Quentin Neill <quentin.neill@amd.com>
+2012-07-30 Nick Clifton <nickc@redhat.com>
- * i386-dis.c (REG_XOP_TBM_01): New.
- (REG_XOP_TBM_02): New.
- (reg_table): Add REG_XOP_TBM_01 and REG_XOP_TBM_02 tables.
- (xop_table): Redirect to REG_XOP_TBM_01 and REG_XOP_TBM_02
- entries, and add bextr instruction.
+ * po/opcodes.pot: Updated template.
+ * po/es.po: Updated Spanish translation.
+ * po/fi.po: Updated Finnish translation.
- * i386-gen.c (cpu_flag_init): Add CPU_TBM_FLAGS, CpuTBM.
- (cpu_flags): Add CpuTBM.
+2012-07-27 Mike Frysinger <vapier@gentoo.org>
- * i386-opc.h (CpuTBM) New.
- (i386_cpu_flags): Add bit cputbm.
+ * configure.in (BFD_VERSION): Run bfd/configure --version and
+ parse the output of that.
+ * configure: Regenerate.
+
+2012-07-25 James Lemke <jwlemke@codesourcery.com>
+
+ * ppc-opc.c (powerpc_opcodes): Add/remove PPCVLE for some 32-bit insns.
- * i386-opc.tbl: Add bextr, blcfill, blci, blcic, blcmsk,
- blcs, blsfill, blsic, t1mskc, and tzmsk.
+2012-07-24 Stephan McCamant <smcc@cs.berkeley.edu>
+ Dr David Alan Gilbert <dave@treblig.org>
+
+ PR binutils/13135
+ * arm-dis.c: Add necessary casts for printing integer values.
+ Use %s when printing string values.
+ * hppa-dis.c: Likewise.
+ * m68k-dis.c: Likewise.
+ * microblaze-dis.c: Likewise.
+ * mips-dis.c: Likewise.
+ * sparc-dis.c: Likewise.
+
+2012-07-19 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
+
+ PR binutils/14355
+ * i386-dis.c (VEX_LEN_0FXOP_08_CC): New.
+ (VEX_LEN_0FXOP_08_CD): Likewise.
+ (VEX_LEN_0FXOP_08_CE): Likewise.
+ (VEX_LEN_0FXOP_08_CF): Likewise.
+ (VEX_LEN_0FXOP_08_EC): Likewise.
+ (VEX_LEN_0FXOP_08_ED): Likewise.
+ (VEX_LEN_0FXOP_08_EE): Likewise.
+ (VEX_LEN_0FXOP_08_EF): Likewise.
+ (xop_table): Fix entries for vpcomb, vpcomw, vpcomd, vpcomq,
+ vpcomub, vpcomuw, vpcomud, vpcomuq.
+ (vex_len_table): Add entries for VEX_LEN_0FXOP_08_CC,
+ VEX_LEN_0FXOP_08_CD, VEX_LEN_0FXOP_08_CE, VEX_LEN_0FXOP_08_CF,
+ VEX_LEN_0FXOP_08_EC, VEX_LEN_0FXOP_08_ED, VEX_LEN_0FXOP_08_EE,
+ VEX_LEN_0FXOP_08_EF.
+
+2012-07-16 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
+
+ * i386-dis.c (PREFIX_0F38F6): New.
+ (prefix_table): Add adcx, adox instructions.
+ (three_byte_table): Use PREFIX_0F38F6.
+ (mod_table): Add rdseed instruction.
+ * i386-gen.c (cpu_flag_init): Add CpuADX, CpuRDSEED, CpuPRFCHW.
+ (cpu_flags): Likewise.
+ * i386-opc.h: Add CpuADX, CpuRDSEED, CpuPRFCHW.
+ (i386_cpu_flags): Add fields cpurdseed, cpuadx, cpuprfchw.
+ * i386-opc.tbl: Add instrcutions adcx, adox, rdseed. Extend
+ prefetchw.
+ * i386-tbl.h: Regenerate.
+ * i386-init.h: Likewise.
+
+2012-07-05 Thomas Schwinge <thomas@codesourcery.com>
+
+ * mips-dis.c: Remove gratuitous newline.
+
+2012-07-05 Sean Keys <skeys@ipdatasys.com>
+
+ * xgate-dis.c: Removed an IF statement that will
+ always be false due to overlapping operand masks.
+ * xgate-opc.c: Corrected 'com' opcode entry and
+ fixed spacing.
+
+2012-07-02 Roland McGrath <mcgrathr@google.com>
+
+ * i386-opc.tbl: Add RepPrefixOk to nop.
+ * i386-tbl.h: Regenerate.
+
+2012-06-28 Nick Clifton <nickc@redhat.com>
+
+ * po/vi.po: Updated Vietnamese translation.
+
+2012-06-22 Roland McGrath <mcgrathr@google.com>
+
+ * i386-opc.tbl: Add RepPrefixOk to ret.
+ * i386-tbl.h: Regenerate.
+
+ * i386-opc.h (RepPrefixOk): New enum constant.
+ (i386_opcode_modifier): New bitfield 'repprefixok'.
+ * i386-gen.c (opcode_modifiers): Add RepPrefixOk.
+ * i386-opc.tbl: Add RepPrefixOk to bsf, bsr, and to all
+ instructions that have IsString.
+ * i386-tbl.h: Regenerate.
+
+2012-06-11 Andreas Schwab <schwab@linux-m68k.org>
+
+ * ppc-opc.c (lvsl, lvebx, isellt, icbt, ldepx, lwepx, lvsr, lvehx)
+ (iselgt, lvewx, iseleq, isel, dcbst, dcbstep, dcbfl, dcbf, lbepx)
+ (lvx, dcbfep, dcbtstls, stvebx, dcbtstlse, stdepx, stwepx, dcbtls)
+ (stvehx, dcbtlse, stvewx, stbepx, icblc, stvx, dcbtstt, dcbtst)
+ (dcbtst, dcbtstep, dcbtt, dcbt, dcbt, lhepx, eciwx, dcbtep)
+ (dcread, lxvdsx, lvxl, dcblc, sthepx, ecowx, dcbi, dcread, icbtls)
+ (stvxl, lxsdx, lfdepx, stxsdx, stfdepx, dcba, dcbal, lxvw4x)
+ (tlbivax, lfdpx, lxvd2x, tlbsrx., stxvw4x, tlbsx, tlbsx., stfdpx)
+ (stfqx, stxvd2x, icbi, icbiep, icread, dcbzep): Change RA to RA0.
+
+2012-05-19 Alan Modra <amodra@gmail.com>
+
+ * ppc-dis.c: Don't include elf32-ppc.h, do include elf/ppc.h.
+ (get_powerpc_dialect): Detect VLE sections from ELF sh_flags.
+
+2012-05-18 Alan Modra <amodra@gmail.com>
+
+ * ia64-opc.c: Remove #include "ansidecl.h".
+ * z8kgen.c: Include sysdep.h first.
+
+ * arc-dis.c: Include sysdep.h first, remove some redundant includes.
+ * bfin-dis.c: Likewise.
+ * i860-dis.c: Likewise.
+ * ia64-dis.c: Likewise.
+ * ia64-gen.c: Likewise.
+ * m68hc11-dis.c: Likewise.
+ * mmix-dis.c: Likewise.
+ * msp430-dis.c: Likewise.
+ * or32-dis.c: Likewise.
+ * rl78-dis.c: Likewise.
+ * rx-dis.c: Likewise.
+ * tic4x-dis.c: Likewise.
+ * tilegx-opc.c: Likewise.
+ * tilepro-opc.c: Likewise.
+ * rx-decode.c: Regenerate.
-2011-01-12 DJ Delorie <dj@redhat.com>
+2012-05-17 James Lemke <jwlemke@codesourcery.com>
- * rx-dis.c (print_insn_rx): Support RX_Operand_TwoReg.
+ * ppc-opc.c (powerpc_macros): Add entries for e_extlwi to e_clrlslwi.
-2011-01-11 Mingjie Xing <mingjie.xing@gmail.com>
+2012-05-17 James Lemke <jwlemke@codesourcery.com>
- * mips-dis.c (print_insn_args): Adjust the value to print the real
- offset for "+c" argument.
+ * ppc-opc.c (extract_sprg): Use ALLOW8_SPRG to include VLE.
-2011-01-10 Nick Clifton <nickc@redhat.com>
+2012-05-17 Daniel Richard G. <skunk@iskunk.org>
+ Nick Clifton <nickc@redhat.com>
- * po/da.po: Updated Danish translation.
+ PR 14072
+ * configure.in: Add check that sysdep.h has been included before
+ any system header files.
+ * configure: Regenerate.
+ * config.in: Regenerate.
+ * sysdep.h: Generate an error if included before config.h.
+ * alpha-opc.c: Include sysdep.h before any other header file.
+ * alpha-dis.c: Likewise.
+ * avr-dis.c: Likewise.
+ * cgen-opc.c: Likewise.
+ * cr16-dis.c: Likewise.
+ * cris-dis.c: Likewise.
+ * crx-dis.c: Likewise.
+ * d10v-dis.c: Likewise.
+ * d10v-opc.c: Likewise.
+ * d30v-dis.c: Likewise.
+ * d30v-opc.c: Likewise.
+ * h8500-dis.c: Likewise.
+ * i370-dis.c: Likewise.
+ * i370-opc.c: Likewise.
+ * m10200-dis.c: Likewise.
+ * m10300-dis.c: Likewise.
+ * micromips-opc.c: Likewise.
+ * mips-opc.c: Likewise.
+ * mips61-opc.c: Likewise.
+ * moxie-dis.c: Likewise.
+ * or32-opc.c: Likewise.
+ * pj-dis.c: Likewise.
+ * ppc-dis.c: Likewise.
+ * ppc-opc.c: Likewise.
+ * s390-dis.c: Likewise.
+ * sh-dis.c: Likewise.
+ * sh64-dis.c: Likewise.
+ * sparc-dis.c: Likewise.
+ * sparc-opc.c: Likewise.
+ * spu-dis.c: Likewise.
+ * tic30-dis.c: Likewise.
+ * tic54x-dis.c: Likewise.
+ * tic80-dis.c: Likewise.
+ * tic80-opc.c: Likewise.
+ * tilegx-dis.c: Likewise.
+ * tilepro-dis.c: Likewise.
+ * v850-dis.c: Likewise.
+ * v850-opc.c: Likewise.
+ * vax-dis.c: Likewise.
+ * w65-dis.c: Likewise.
+ * xgate-dis.c: Likewise.
+ * xtensa-dis.c: Likewise.
+ * rl78-decode.opc: Likewise.
+ * rl78-decode.c: Regenerate.
+ * rx-decode.opc: Likewise.
+ * rx-decode.c: Regenerate.
-2011-01-05 Nathan Sidwell <nathan@codesourcery.com>
+2012-05-17 Alan Modra <amodra@gmail.com>
- * arm-dis.c (thumb32_opcodes): BLX must have bit zero clear.
+ * ppc_dis.c: Don't include elf/ppc.h.
-2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
+2012-05-16 Meador Inge <meadori@codesourcery.com>
- * i386-dis.c (REG_VEX_38F3): New.
- (PREFIX_0FBC): Likewise.
- (PREFIX_VEX_38F2): Likewise.
- (PREFIX_VEX_38F3_REG_1): Likewise.
- (PREFIX_VEX_38F3_REG_2): Likewise.
- (PREFIX_VEX_38F3_REG_3): Likewise.
- (PREFIX_VEX_38F7): Likewise.
- (VEX_LEN_38F2_P_0): Likewise.
- (VEX_LEN_38F3_R_1_P_0): Likewise.
- (VEX_LEN_38F3_R_2_P_0): Likewise.
- (VEX_LEN_38F3_R_3_P_0): Likewise.
- (VEX_LEN_38F7_P_0): Likewise.
- (dis386_twobyte): Use PREFIX_0FBC.
- (reg_table): Add REG_VEX_38F3.
- (prefix_table): Add PREFIX_0FBC, PREFIX_VEX_38F2,
- PREFIX_VEX_38F3_REG_1, PREFIX_VEX_38F3_REG_2,
- PREFIX_VEX_38F3_REG_3 and PREFIX_VEX_38F7.
- (vex_table): Use PREFIX_VEX_38F2, REG_VEX_38F3 and
- PREFIX_VEX_38F7.
- (vex_len_table): Add VEX_LEN_38F2_P_0, VEX_LEN_38F3_R_1_P_0,
- VEX_LEN_38F3_R_2_P_0, VEX_LEN_38F3_R_3_P_0 and
- VEX_LEN_38F7_P_0.
+ * arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
+ to PUSH/POP {reg}.
+
+2012-05-15 James Murray <jsm@jsm-net.demon.co.uk>
+ Stephane Carrez <stcarrez@nerim.fr>
+
+ * configure.in: Add S12X and XGATE co-processor support to m68hc11
+ target.
+ * disassemble.c: Likewise.
+ * configure: Regenerate.
+ * m68hc11-dis.c: Make objdump output more consistent, use hex
+ instead of decimal and use 0x prefix for hex.
+ * m68hc11-opc.c: Add S12X and XGATE opcodes.
+
+2012-05-14 James Lemke <jwlemke@codesourcery.com>
+
+ * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
+ (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
+ (vle_opcd_indices): New array.
+ (lookup_vle): New function.
+ (disassemble_init_powerpc): Revise for second (VLE) opcode table.
+ (print_insn_powerpc): Likewise.
+ * ppc-opc.c: Likewise.
+
+2012-05-14 Catherine Moore <clm@codesourcery.com>
+ Maciej W. Rozycki <macro@codesourcery.com>
+ Rhonda Wittels <rhonda@codesourcery.com>
+ Nathan Froyd <froydnj@codesourcery.com>
+
+ * ppc-opc.c (insert_arx, extract_arx): New functions.
+ (insert_ary, extract_ary): New functions.
+ (insert_li20, extract_li20): New functions.
+ (insert_rx, extract_rx): New functions.
+ (insert_ry, extract_ry): New functions.
+ (insert_sci8, extract_sci8): New functions.
+ (insert_sci8n, extract_sci8n): New functions.
+ (insert_sd4h, extract_sd4h): New functions.
+ (insert_sd4w, extract_sd4w): New functions.
+ (insert_vlesi, extract_vlesi): New functions.
+ (insert_vlensi, extract_vlensi): New functions.
+ (insert_vleui, extract_vleui): New functions.
+ (insert_vleil, extract_vleil): New functions.
+ (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
+ (BI16, BI32, BO32, B8): New.
+ (B15, B24, CRD32, CRS): New.
+ (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
+ (DB, IMM20, RD, Rx, ARX, RY, RZ): New.
+ (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
+ (SH6_MASK): Use PPC_OPSHIFT_INV.
+ (SI8, UI5, OIMM5, UI7, BO16): New.
+ (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
+ (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
+ (ALLOW8_SPRG): New.
+ (insert_sprg, extract_sprg): Check ALLOW8_SPRG.
+ (OPVUP, OPVUP_MASK OPVUP): New
+ (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
+ (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
+ (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
+ (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
+ (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
+ (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
+ (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
+ (SE_IM5, SE_IM5_MASK): New.
+ (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
+ (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
+ (BO32DNZ, BO32DZ): New.
+ (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
+ (PPCVLE): New.
+ (powerpc_opcodes): Add new VLE instructions. Update existing
+ instruction to include PPCVLE if supported.
+ * ppc-dis.c (ppc_opts): Add vle entry.
+ (get_powerpc_dialect): New function.
+ (powerpc_init_dialect): VLE support.
+ (print_insn_big_powerpc): Call get_powerpc_dialect.
+ (print_insn_little_powerpc): Likewise.
+ (operand_value_powerpc): Handle negative shift counts.
+ (print_insn_powerpc): Handle 2-byte instruction lengths.
+
+2012-05-11 Daniel Richard G. <skunk@iskunk.org>
+
+ PR binutils/14028
+ * configure.in: Invoke ACX_HEADER_STRING.
+ * configure: Regenerate.
+ * config.in: Regenerate.
+ * sysdep.h: If STRINGS_WITH_STRING is defined then include both
+ string.h and strings.h.
+
+2012-05-11 Nick Clifton <nickc@redhat.com>
+
+ PR binutils/14006
+ * arm-dis.c (print_insn): Fix detection of instruction mode in
+ files containing multiple executable sections.
+
+2012-05-03 Sean Keys <skeys@ipdatasys.com>
+
+ * Makefile.in, configure: regenerate
+ * disassemble.c (disassembler): Recognize ARCH_XGATE.
+ * xgate-dis.c (read_memory, print_insn, print_insn_xgate):
+ New functions.
+ * configure.in: Recognize xgate.
+ * xgate-dis.c, xgate-opc.c: New files for support of xgate
+ * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
+ and opcode generation for xgate.
+
+2012-04-30 DJ Delorie <dj@redhat.com>
+
+ * rx-decode.opc (MOV): Do not sign-extend immediates which are
+ already the maximum bit size.
+ * rx-decode.c: Regenerate.
- * i386-gen.c (cpu_flag_init): Add CPU_BMI_FLAGS.
- (cpu_flags): Add CpuBMI.
+2012-04-27 David S. Miller <davem@davemloft.net>
- * i386-opc.h (CpuBMI): New.
- (i386_cpu_flags): Add cpubmi.
+ * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
+ * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
- * i386-opc.tbl: Add andn, bextr, blsi, blsmsk, blsr and tzcnt.
+ * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
+ * sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
+
+ * sparc-opc.c (CBCOND): New define.
+ (CBCOND_XCC): Likewise.
+ (cbcond): New helper macro.
+ (sparc_opcodes): Add compare-and-branch instructions.
+
+ * sparc-dis.c (print_insn_sparc): Handle ')'.
+ * sparc-opc.c (sparc_opcodes): Add crypto instructions.
+
+ * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
+ into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
+
+2012-04-12 David S. Miller <davem@davemloft.net>
+
+ * sparc-dis.c (X_DISP10): Define.
+ (print_insn_sparc): Handle '='.
+
+2012-04-01 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-dis.c (fmtconst): Replace decimal handling with a single
+ sprintf call and the '*' field width.
+
+2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
+
+ * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
+
+2012-03-16 Alan Modra <amodra@gmail.com>
+
+ * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
+ (powerpc_opcd_indices): Bump array size.
+ (disassemble_init_powerpc): Set powerpc_opcd_indices entries
+ corresponding to unused opcodes to following entry.
+ (lookup_powerpc): New function, extracted and optimised from..
+ (print_insn_powerpc): ..here.
+
+2012-03-15 Alan Modra <amodra@gmail.com>
+ James Lemke <jwlemke@codesourcery.com>
+
+ * disassemble.c (disassemble_init_for_target): Handle ppc init.
+ * ppc-dis.c (private): New var.
+ (powerpc_init_dialect): Don't return calloc failure, instead use
+ private.
+ (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
+ (powerpc_opcd_indices): New array.
+ (disassemble_init_powerpc): New function.
+ (print_insn_big_powerpc): Don't init dialect here.
+ (print_insn_little_powerpc): Likewise.
+ (print_insn_powerpc): Start search using powerpc_opcd_indices.
+
+2012-03-10 Edmar Wienskoski <edmar@freescale.com>
+
+ * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
+ * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
+ (PPCVEC2, PPCTMR, E6500): New short names.
+ (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
+ mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
+ lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
+ lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
+ lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
+ optional operands on sync instruction for E6500 target.
+
+2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+
+ * s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
+
+2012-02-27 Alan Modra <amodra@gmail.com>
+
+ * mt-dis.c: Regenerate.
+
+2012-02-27 Alan Modra <amodra@gmail.com>
+
+ * v850-opc.c (extract_v8): Rearrange to make it obvious this
+ is the inverse of corresponding insert function.
+ (extract_d22, extract_u9, extract_r4): Likewise.
+ (extract_d9): Correct sign extension.
+ (extract_d16_15): Don't assume "long" is 32 bits, and don't
+ rely on implementation defined behaviour for shift right of
+ signed types.
+ (extract_d16_16, extract_d17_16, extract_i9): Likewise.
+ (extract_d23): Likewise, and correct mask.
+
+2012-02-27 Alan Modra <amodra@gmail.com>
+
+ * crx-dis.c (print_arg): Mask constant to 32 bits.
+ * crx-opc.c (cst4_map): Use int array.
+
+2012-02-27 Alan Modra <amodra@gmail.com>
+
+ * arc-dis.c (BITS): Don't use shifts to mask off bits.
+ (FIELDD): Sign extend with xor,sub.
+
+2012-02-25 Walter Lee <walt@tilera.com>
+
+ * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
+ * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
+ TILEPRO_OPC_LW_TLS_SN.
+
+2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-opc.h (HLEPrefixNone): New.
+ (HLEPrefixLock): Likewise.
+ (HLEPrefixAny): Likewise.
+ (HLEPrefixRelease): Likewise.
+
+2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (HLE_Fixup1): New.
+ (HLE_Fixup2): Likewise.
+ (HLE_Fixup3): Likewise.
+ (Ebh1): Likewise.
+ (Evh1): Likewise.
+ (Ebh2): Likewise.
+ (Evh2): Likewise.
+ (Ebh3): Likewise.
+ (Evh3): Likewise.
+ (MOD_C6_REG_7): Likewise.
+ (MOD_C7_REG_7): Likewise.
+ (RM_C6_REG_7): Likewise.
+ (RM_C7_REG_7): Likewise.
+ (XACQUIRE_PREFIX): Likewise.
+ (XRELEASE_PREFIX): Likewise.
+ (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
+ cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
+ Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
+ (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
+ not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
+ MOD_C6_REG_7 and MOD_C7_REG_7.
+ (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
+ (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
+ xtest.
+ (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
+ (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
+
+ * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
+ CPU_RTM_FLAGS.
+ (cpu_flags): Add CpuHLE and CpuRTM.
+ (opcode_modifiers): Add HLEPrefixOk.
+
+ * i386-opc.h (CpuHLE): New.
+ (CpuRTM): Likewise.
+ (HLEPrefixOk): Likewise.
+ (i386_cpu_flags): Add cpuhle and cpurtm.
+ (i386_opcode_modifier): Add hleprefixok.
+
+ * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
+ add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
+ sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
+ operand. Add xacquire, xrelease, xabort, xbegin, xend and
+ xtest.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
-2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
+2012-01-24 DJ Delorie <dj@redhat.com>
+
+ * rl78-decode.opc (rl78_decode_opcode): Add NOT1.
+ * rl78-decode.c: Regenerate.
+
+2012-01-17 James Murray <jsm@jsm-net.demon.co.uk>
+
+ PR binutils/10173
+ * cr16-dis.c (print_arg): Test symtab_size not num_symbols.
+
+2012-01-17 Andreas Schwab <schwab@linux-m68k.org>
- * i386-dis.c (VexGdq): New.
- (OP_VEX): Handle dq_mode.
+ * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
+ register and move them after pmove with PSR/PCSR register.
-2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
+2012-01-13 H.J. Lu <hongjiu.lu@intel.com>
- * i386-gen.c (process_copyright): Update copyright to 2011.
+ * i386-dis.c (mod_table): Add vmfunc.
+
+ * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
+ (cpu_flags): CpuVMFUNC.
+
+ * i386-opc.h (CpuVMFUNC): New.
+ (i386_cpu_flags): Add cpuvmfunc.
+
+ * i386-opc.tbl: Add vmfunc.
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Likewise.
-For older changes see ChangeLog-2010
+For older changes see ChangeLog-2011
\f
Local Variables:
mode: change-log