+2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * mips-dis.c (INSNLEN): Rename MAXLEN.
+ (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
+ (print_insn_arg): Remove $ prefix of register names.
+ (set_mips_isa_type): Remove.
+ (imps_isa_type): New function.
+ (get_mips_isa): New Function.
+ (print_insn_mips): Rename _print_insn_mips.
+ (_print_insn_mips): New function, contains code which was
+ duplicated in print_insn_big_mips and print_insn_little_mips.
+ (print_insn_big_mips): Moved code to _print_insn_mips.
+ (print_insn_little_mips): Likewise.
+ (print_mips16_insn_arg): Remove $ prefix of register names.
+ Print error message before abort.
+
+2001-05-14 J.T. Conklin <jtc@redback.com>
+
+ * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
+ simplified mnemonics used for setting PPC750-specific special
+ purpose registers.
+
+2001-05-12 H.J. Lu <hjl@gnu.org>
+
+ * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
+ `rm'.
+
+2001-05-12 Peter Targett <peter.targett@arccores.com>
+
+ * arc-opc.c (arc_reg_names): Correct attribute for lp_count
+ register to r/w. Formatting fixes throughout file.
+
+2001-05-12 Alan Modra <amodra@one.net.au>
+
+ * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
+ movq operands.
+ (twobyte_has_modrm): Update table.
+ (need_modrm): Give it file scope.
+ (MODRM_CHECK): Define.
+ (dofloat): Use MODRM_CHECK.
+ (OP_E): Likewise.
+ (OP_EM): Likewise.
+ (OP_EX): Likewise.
+
+2001-05-07 Frank Ch. Eigler <fche@redhat.com>
+
+ * cgen-dis.in (default_print_insn): Tolerate min<base instructions
+ even at end of a section.
+ * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
+ by ignoring precariously-unpacked insn_value in favor of raw buffer.
+
+2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * disassemble.c (disassembler_usage): Remove unused attribute.
+
+2001-05-04 Frank Ch. Eigler <fche@redhat.com>
+
+ * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
+
+2001-05-04 Frank Ch. Eigler <fche@redhat.com>
+
+ * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
+ assume incoming buffer already has the base insn loaded. Handle
+ smaller-than-base instructions for variable-length case.
+
+2001-05-04 Alan Modra <amodra@one.net.au>
+
+ * i386-dis.c (Ev, Ed): Remove duplicate define.
+ (Gd): Define.
+ (XS): Define.
+ (OP_XS): New function.
+ (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
+ movmskp operands.
+ (dis386_twobyte_intel): Likewise.
+ (prefix_user_table): Use MS for maskmovq operand.
+
+2001-04-27 Johan Rydberg <jrydberg@opencores.org>
+
+ * Makefile.am: Add OpenRISC target.
+ * Makefile.in: Regenerated.
+
+ * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
+
+ * configure.in (bfd_openrisc_arch): Add target.
+ * configure: Regenerated.
+
+ * openrisc-asm.c: New file.
+ * openrisc-desc.c: Likewise.
+ * openrisc-desc.h: Likewise.
+ * openrisc-dis.c: Likewise.
+ * openrisc-ibld.c: Likewise.
+ * openrisc-opc.c: Likewise.
+ * openrisc-opc.h: Likewise.
+
+2001-04-24 Christian Groessler <cpg@aladdin.de>
+
+ * z8k-dis.c: add names of control registers (ctrl_names);
+ (seg_length): provides instruction length fixup for segmented
+ mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
+ CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
+ (unparse_intr): handle CLASS_PR, print addresses without '#'
+ * z8k-opc.h: re-created with new z8kgen
+ * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
+ entries for ldctl/ldctlb instruction
+
+2001-04-06 Andreas Jaeger <aj@suse.de>
+
+ * i386-dis.c: Add ffreep instruction.
+
+2001-03-30 Alexandre Oliva <aoliva@redhat.com>
+
+ * ppc-opc.c (insert_mbe): Shift mask initializer as long.
+
+2001-03-24 Alan Modra <alan@linuxcare.com.au>
+
+ * i386-dis.c (PREGRP25): Define.
+ (dis386_twobyte_att): Use here in place of "movntq" entry.
+ (dis386_twobyte_intel): Likewise.
+ (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
+ (PREGRP26): Define.
+ (dis386_twobyte_att): Use here.
+ (dis386_twobyte_intel): Likewise.
+ (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
+ (prefix_user_table <maskmovdqu>): XM operand, not MX.
+ (prefix_user_table): Cosmetic changes to "bad" entries.
+
+2001-03-23 Nick Clifton <nickc@redhat.com>
+
+ * mips-opc.c: Remove extraneous whitespace.
+ * mips-dis.c: Remove extraneous whitespace.
+
+2001-03-22 Ben Elliston <bje@redhat.com>
+
+ * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
+ declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
+ * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
+ to allay a compiler warning.
+
+2001-03-22 Alan Modra <alan@linuxcare.com.au>
+
+ * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
+ (dis386_twobyte_intel): Likewise.
+ (twobyte_has_modrm): Set entry for paddq, psubq.
+
+2001-03-20 Patrick Macdonald <patrickm@redhat.com>
+
+ * cgen-dis.in (print_insn_@arch@): Add support for target machine
+ determination via CGEN_COMPUTE_MACH.
+ * fr30-desc.c: Regenerate.
+ * fr30-dis.c: Regenerate.
+ * fr30-opc.h: Regenerate.
+ * m32r-desc.c: Regenerate.
+ * m32r-dis.c: Regenerate.
+ * m32r-opc.h: Regenerate.
+ * m32r-opinst.c: Regenerate.
+
+2001-03-20 H.J. Lu <hjl@gnu.org>
+
+ * configure.in: Remove the redundent AC_ARG_PROGRAM.
+ * configure: Rebuild.
+
+2001-03-19 Jim Wilson <wilson@redhat.com>
+
+ * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
+ notestr if larger than xsect.
+ (in_class): Handle format M5.
+ * ia64-asmtab.c: Regnerate.
+
+2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
+
+ * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
+ has more than one byte left to read.
+
+2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
+
+ * s390-opc.c: Add new opcodes. Smooth out formatting.
+ * s390-opc.txt: Add new opcodes.
+
+2001-03-06 Nick Clifton <nickc@redhat.com>
+
+ * arm-dis.c (print_insn_thumb): Compute destination address
+ of BLX(1) instruction by taking bit 1 from PC and not from bit
+ 0 of the offset.
+
+2001-03-06 Igor Shevlyakov <igor@windriver.com>
+
+ * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
+ so command line switches will work.
+
+2001-03-05 Dave Brolley <brolley@redhat.com>
+
+ * fr30-asm.c: Regenerate.
+ * fr30-desc.c: Regenerate.
+ * fr30-desc.h: Regenerate.
+ * fr30-dis.c: Regenerate.
+ * fr30-ibld.c: Regenerate.
+ * fr30-opc.c: Regenerate.
+ * fr30-opc.h: Regenerate.
+ * m32r-asm.c: Regenerate.
+ * m32r-desc.c: Regenerate.
+ * m32r-desc.h: Regenerate.
+ * m32r-dis.c: Regenerate.
+ * m32r-ibld.c: Regenerate.
+ * m32r-opc.c: Regenerate.
+ * m32r-opc.h: Regenerate.
+ * m32r-opinst.c: Regenerate.
+
+2001-02-28 Igor Shevlyakov <igor@windriver.com>
+
+ * m68k-opc.c: fix cpushl according to Motorola. Enable
+ bunch of instructions for Coldfire 5407 and add all new.
+
+2001-02-27 Alan Modra <alan@linuxcare.com.au>
+
+ * configure.in (BFD_VERSION): Do without grep.
+ * configure: Regenerate.
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+
+2001-02-23 David Mosberger <davidm@hpl.hp.com>
+
+ * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
+ * ia64-asmtab.c: Regenerate.
+
+2001-02-21 David Mosberger <davidm@hpl.hp.com>
+
+ * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
+ separate variants: one for IMM22 and the other for IMM14.
+ * ia64-asmtab.c: Regenerate.
+
+2001-02-21 Greg McGary <greg@mcgary.org>
+
+ * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
+
+2001-02-20 H.J. Lu <hjl@gnu.org>
+
+ * Makefile.am (ia64-ic.tbl): Remove the target.
+ (ia64-raw.tbl): Likewise.
+ (ia64-waw.tbl): Likewise.
+ (ia64-war.tbl): Likewise.
+ (ia64-asmtab.c): Generate it in the source directory.
+ * Makefile.in: Regenerated.
+
+2001-02-18 lars brinkhoff <lars@nocrew.org>
+
+ * Makefile.am: Add PDP-11 target.
+ * configure.in: Likewise.
+ * disassemble.c: Likewise.
+ * pdp11-dis.c: New file.
+ * pdp11-opc.c: New file.
+
+2001-02-14 Jim Wilson <wilson@redhat.com>
+
+ * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
+ * ia64-asmtab.c: Regenerate.
+
+Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
+
+ * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
+ instructions.
+ (putop): Handle 'Y'
+
+2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
+
+ * mips-dis.c (print_insn_arg): Use top four bits of the address of
+ the following instruction not of the jump itself for the jump
+ target.
+ (print_mips16_insn_arg): Likewise.
+
+2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
+
+ * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
+ directory.
+ * Makefile.in: Regenerate.
+
+2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
+
+ * Makefile.am: Add linux target for S/390.
+ * Makefile.in: Likewise.
+ * configure.in: Likewise.
+ * disassemble.c: Likewise.
+ * s390-dis.c: New file.
+ * s390-mkopc.c: New file.
+ * s390-opc.c: New file.
+ * s390-opc.txt: New file.
+
+2001-02-05 Jim Wilson <wilson@redhat.com>
+
+ * ia64-asmtab.c: Revert 2000-12-16 change.
+
+2001-02-02 Patrick Macdonald <patrickm@redhat.com>
+
+ * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
+ * m32r-desc.h: Regenerate.
+
+Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
+
+ * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
+ (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
+
+2001-01-14 Alan Modra <alan@linuxcare.com.au>
+
+ * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
+
+2001-01-13 Nick Clifton <nickc@redhat.com>
+
+ * disassemble.c: Remove spurious white space.
+
+Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
+
+ * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
+ templates.
+
+2001-01-11 Peter Targett <peter.targett@arccores.com>
+
+ * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
+ * Makefile.am (C_FILES): Add arc-ext.c.
+ (ALL_MACHINES) Add arc-ext.lo.
+ (INCLUDES) Add opcode directory to list.
+ New dependency entry for arc-ext.lo.
+ * disassemble.c (disassembler): Correct call to
+ arc_get_disassembler.
+ * arc-opc.c: New update for ARC, including full base
+ instructions for ARC variants.
+ * arc-dis.h, arc-dis.c: New update for ARC, including
+ extensibility functionality.
+ * arc-ext.h, arc-ext.c: New files for handling extensibility.
+
+2001-01-10 Jan Hubicka <jh@suse.cz>
+
+ * i386-dis.c (PREGRP15 - PREGRP24): New.
+ (dis386_twobyt): Add SSE2 instructions.
+ (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
+ (twobyte_uses_f3_prefix): ... this one.
+ (grps): Add SSE instructions.
+ (prefix_user_table): Add two new slots; add SSE2 instructions.
+ (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
+ Handle the REPNZ and Data16 prefixes as well; do proper lookup
+ to prefix_user_table.
+ (OP_E): Accept mfence and lfence as well.
+ (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
+ (OP_XMM): Support REX extensions.
+ (OP_EM): Likewise.
+ (OP_EX): Likewise.
+
+2001-01-09 Nick Clifton <nickc@redhat.com>
+
+ * arm-dis.c (print_insn): Set pc to zero for instructions with
+ a reloc associated with them.
+
2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
* cgen-asm.in (parse_insn_normal): Changed syn to be
* cgen-dis.in (print_insn_normal): Ditto.
* cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
-Fri Jan 5 11:31:07 MET 2001 Jan Hubicka <jh@suse.cz>
+2001-01-05 Jan Hubicka <jh@suse.cz>
* i386-dis.c: Add x86_64 support.
(rex): New static variable.
* ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
argument.
- * ia64_gen.c (insert_deplist): Cast sizeof result to int.
+ * ia64-gen.c (insert_deplist): Cast sizeof result to int.
(print_dependency_table): Print NULL if semantics field not set.
(insert_opcode_dependencies): Mark cmp parameter as unused.
(print_main_table): Use fprintf_vma to print long long fields.
Delete "sel" code operands from mfc1 and mtc1.
Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
for dm[ft]c[023].
-
+
2000-12-03 Ed Satterthwaite ehs@sibyte.com and
Chris Demetriou cgd@sibyte.com
"mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
"wait" variant which uses 'J' operand specifier.
-
+
* mips-dis.c (set_mips_isa_type): Update to use
CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
* sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
(compute_arch_mask): Add v8plusb and v9b machines.
(print_insn_sparc): siam mode decoding, accept ASRs up to 25.
- * opcodes/sparc-opc.c: Support for Cheetah instruction set.
+ * sparc-opc.c: Support for Cheetah instruction set.
(prefetch_table): Add #invalidate.
2000-10-16 Nick Clifton <nickc@redhat.com>
* m32r-desc.h: Regenerate.
* m32r-ibld.c: Regenerate.
-2000-10-05 Jim Wilson <wilson@cygnus.com>
+2000-10-05 Jim Wilson <wilson@redhat.com>
* ia64-ic.tbl: Update from Intel.
* ia64-asmtab.c: Regenerate.
-
+
2000-10-04 Kazu Hirata <kazu@hxi.com>
* ia64-gen.c: Convert C++-style comments to C-style comments.
New.
* disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
-2000-09-22 Jim Wilson <wilson@cygnus.com>
+2000-09-22 Jim Wilson <wilson@redhat.com>
* ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
gt, ge, ngt, and nge.
* ia64-asmtab.c: Regnerate.
2000-09-13 Anders Norlander <anorland@acc.umu.se>
-
- * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
- Add mfc0 and mtc0 with sub-selection values.
+
+ * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
+ Add mfc0 and mtc0 with sub-selection values.
Add clo and clz opcodes.
- Add msub and msubu instructions for MIPS32.
- Add madd/maddu aliases for mad/madu for MIPS32.
- Support wait, deret, eret, movn, pref for MIPS32.
+ Add msub and msubu instructions for MIPS32.
+ Add madd/maddu aliases for mad/madu for MIPS32.
+ Support wait, deret, eret, movn, pref for MIPS32.
Support tlbp, tlbr, tlbwi, tlbwr.
- (P4): New define.
-
- * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
- (print_insn_arg): Handle 'H' args.
- (set_mips_isa_type): Recognize 4K.
+ (P4): New define.
+
+ * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
+ (print_insn_arg): Handle 'H' args.
+ (set_mips_isa_type): Recognize 4K.
Use CPU_* defines instead of hardcoded numbers.
2000-09-11 Catherine Moore <clm@redhat.com>
* d30v-opc.c (d30v_operand_t): New operand type Rb2.
(d30v_format_tab): Use Rb2 for modinc and moddec.
-
+
2000-09-07 Catherine Moore <clm@redhat.com>
-
+
* d30v-opc.c (d30v_format_tab): Use format Ra for
modinc and moddec.
* configure: Regenerate.
* po/opcodes.pot: Regenerate.
-
+
2000-08-31 Alexandre Oliva <aoliva@redhat.com>
* acinclude.m4: Include libtool and gettext macros from the
instructions. Added extended mnemonic mftbl as defined in the
405GP manual for all PPCs.
-2000-08-28 Jim Wilson <wilson@cygnus.com>
+2000-08-28 Jim Wilson <wilson@redhat.com>
* ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
call. Change last goto to use failed instead of done.
in the buffer.
* fr30-asm.c: Regenerated.
* fr30-desc.c: Regenerated.
- * fr30-desc.h Regenerated.
+ * fr30-desc.h: Regenerated.
* fr30-dis.c: Regenerated.
* fr30-ibld.c: Regenerated.
* fr30-opc.c: Regenerated.
- * fr30-opc.h Regenerated.
+ * fr30-opc.h: Regenerated.
* m32r-asm.c: Regenerated.
* m32r-desc.c: Regenerated.
- * m32r-desc.h Regenerated.
+ * m32r-desc.h: Regenerated.
* m32r-dis.c: Regenerated.
* m32r-ibld.c: Regenerated.
* m32r-opc.c: Regenerated.
* z8k-dis.c: Fix formatting.
-2000-08-16 Jim Wilson <wilson@cygnus.com>
+2000-08-16 Jim Wilson <wilson@redhat.com>
* ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
break, mov-immediate, nop.
* ia64-opc.h (POSTINC): Define.
* ia64-asmtab.c: Regenerate.
-2000-08-15 Jim Wilson <wilson@cygnus.com>
+2000-08-15 Jim Wilson <wilson@redhat.com>
* ia64-ic.tbl: Add missing entries.
-2000-08-08 Jason Eckhardt <jle@cygnus.com>
+2000-08-08 Jason Eckhardt <jle@redhat.com>
* i860-dis.c (print_br_address): Change third argument from int
to long.
-2000-08-07 Richard Henderson <rth@cygnus.com>
+2000-08-07 Richard Henderson <rth@redhat.com>
* ia64-dis.c (print_insn_ia64): Get byte skip count correct
for MLI templates. Handle IA64_OPND_TGT64.
* cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
* cgen.sh: Likewise.
-2000-08-02 Jim Wilson <wilson@cygnus.com>
-
+2000-08-02 Jim Wilson <wilson@redhat.com>
+
* ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
ATTRIBUTE_UNUSED.
(cgen_parse_keyword): Ditto.
-2000-07-22 Jason Eckhardt <jle@cygnus.com>
+2000-07-22 Jason Eckhardt <jle@redhat.com>
* i860-dis.c: New file.
(print_insn_i860): New function.
* sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
Reported by Bill Clarke <llib@computer.org>.
-2000-07-09 Geoffrey Keating <geoffk@cygnus.com>
+2000-07-09 Geoffrey Keating <geoffk@redhat.com>
* ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
* Makefile.in, configure: regenerate
- * disassemble.c (disassembler): Recognize ARCH_m68hc12,
+ * disassemble.c (disassembler): Recognize ARCH_m68hc12,
ARCH_m68hc11.
- * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
+ * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
New functions.
* configure.in: Recognize m68hc12 and m68hc11.
* m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
- * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
+ * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
and opcode generation for m68hc11 and m68hc12.
2000-06-16 Nick Duffek <nsd@redhat.com>
(bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
correctly.
-Fri Jun 9 21:49:02 2000 Denis Chertykov <denisc@overta.ru>
+2000-06-09 Denis Chertykov <denisc@overta.ru>
* avr-dis.c (avr_operand): Bugfix for jmp/call address.
-Wed Jun 7 21:36:45 2000 Denis Chertykov <denisc@overta.ru>
+2000-06-07 Denis Chertykov <denisc@overta.ru>
* avr-dis.c: completely rewritten.
(bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
correctly. Fix a typo.
-2000-05-31 Nick Clifton <nickc@cygnus.com>
+2000-05-31 Nick Clifton <nickc@redhat.com>
* opintl.h (_(String)): Explain why dgettext is used instead of
gettext.
-2000-05-30 Nick Clifton <nickc@cygnus.com>
+2000-05-30 Nick Clifton <nickc@redhat.com>
* opintl.h (gettext, dgettext, dcgettext, textdomain,
bindtextdomain): Replace defines with those from intl/libgettext.h
* Makefile.am: Update dependencies with "make dep-am"
* Makefile.in: Regenerate.
-Thu May 25 22:53:20 2000 Alexandre Oliva <aoliva@cygnus.com>
+2000-05-25 Alexandre Oliva <aoliva@redhat.com>
* m10300-dis.c (disassemble): Don't assume 32-bit longs when
sign-extending operands.
-Mon May 15 15:18:07 2000 Donald Lindsay <dlindsay@cygnus.com>
+2000-05-15 Donald Lindsay <dlindsay@redhat.com>
* d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
except brf's.
-2000-05-21 Nick Clifton <nickc@cygnus.com>
+2000-05-21 Nick Clifton <nickc@redhat.com>
* Makefile.am (LIBIBERTY): Define.
-Fri May 19 12:29:27 EDT 2000 Diego Novillo <dnovillo@redhat.com>
+2000-05-19 Diego Novillo <dnovillo@redhat.com>
* mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
(STD_REGISTER_NAMES): New name for REGISTER_NAMES.
CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
* m32r-desc.h: Ditto.
-2000-05-15 Nick Clifton <nickc@cygnus.com>
+2000-05-15 Nick Clifton <nickc@redhat.com>
* arm-opc.h: Use upper case for flasg in MSR and MRS
instructions. Allow any bit to be set in the field_mask of
2000-05-11 Thomas de Lellis <tdel@windriver.com>
- * arm-opc.c: Disassembly of thumb ldsb/ldsh
+ * arm-opc.h: Disassembly of thumb ldsb/ldsh
instructions changed to ldrsb/ldrsh.
2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
* mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
target addresses for 'jal' and 'j'.
-2000-05-10 Geoff Keating <geoffk@cygnus.com>
+2000-05-10 Geoff Keating <geoffk@redhat.com>
* ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
also available in common mode when powerpc syntax is being used.
* m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
(dummy_print_address): Ditto.
-2000-05-04 Timothy Wall <twall@cygnus.com>
+2000-05-04 Timothy Wall <twall@redhat.com>
* tic54x-opc.c: New.
* tic54x-dis.c: New.
(print_insn_little_powerpc): Likewise.
(print_insn_powerpc): Prepend 'v' when printing vector registers.
-Mon Apr 24 15:21:35 2000 Clinton Popetz <cpopetz@cygnus.com>
+2000-04-24 Clinton Popetz <cpopetz@redhat.com>
* configure.in: Add bfd_powerpc_64_arch.
* disassemble.c (disassembler): Use print_insn_big_powerpc for
64 bit code.
-2000-04-24 Nick Clifton <nickc@cygnus.com>
+2000-04-24 Nick Clifton <nickc@redhat.com>
* fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
field.
-Sun Apr 23 17:54:14 2000 Denis Chertykov <denisc@overta.ru>
+2000-04-23 Denis Chertykov <denisc@overta.ru>
* avr-dis.c (reg_fmul_d): New. Extract destination register from
FMUL instruction.
(print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
-2000-04-22 Timothy Wall <twall@cygnus.com>
+2000-04-22 Timothy Wall <twall@redhat.com>
* ia64-gen.c (general): Add an ordered table of primary
opcode names, as well as priority fields to disassembly data
* ia64-opc-b.c: Use more abbreviations.
* ia64-asmtab.c: Regenerate.
-Fri Apr 21 16:03:39 2000 Jason Eckhardt <jle@cygnus.com>
+2000-04-21 Jason Eckhardt <jle@redhat.com>
* hppa-dis.c (extract_16): New function.
(print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
new operand types l,y,&,fe,fE,fx.
-Fri Apr 21 13:20:53 2000 Richard Henderson <rth@cygnus.com>
- David Mosberger <davidm@hpl.hp.com>
- Timothy Wall <twall@cygnus.com>
- Bob Manson <manson@charmed.cygnus.com>
- Jim Wilson <wilson@cygnus.com>
+2000-04-21 Richard Henderson <rth@redhat.com>
+ David Mosberger <davidm@hpl.hp.com>
+ Timothy Wall <twall@redhat.com>
+ Bob Manson <manson@charmed.cygnus.com>
+ Jim Wilson <wilson@redhat.com>
* Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
(CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
* ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
- ia64-war.tbl, ia64-waw.tbl): New files.
+ ia64-war.tbl, ia64-waw.tbl: New files.
-2000-04-20 Alexandre Oliva <aoliva@cygnus.com>
+2000-04-20 Alexandre Oliva <aoliva@redhat.com>
* m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
(disassemble): Use them.
w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
ansidecl.h as sysdep.h includes it.
-Fri Apr 7 15:56:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
+2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
* configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
--enable-build-warnings option.
* Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
* Makefile.in, configure: Re-generate.
-Wed Apr 5 22:28:18 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
+2000-04-05 J"orn Rennecke <amylaar@redhat.com>
- * sh-opc.c (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
+ * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
stc GBR,@-<REG_N> is available for arch_sh1_up.
Group parallel processing insn with identical mnemonics together.
Make three-operand psha / pshl come first.
-Wed Apr 5 22:05:40 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
+2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
* sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
the parameter ATTRIBUTE_UNUSED.
* ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
-2000-04-01 Alexandre Oliva <aoliva@cygnus.com>
+2000-04-01 Alexandre Oliva <aoliva@redhat.com>
* m10300-opc.c: SP-based offsets are always unsigned.
* arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
[branch always] instead of "undefined".
-2000-03-27 Nick Clifton <nickc@cygnus.com>
+2000-03-27 Nick Clifton <nickc@redhat.com>
* d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
short instructions, from end of list of long instructions.
* disassemble.c: Likewise.
* configure: Regenerate.
-Mon Mar 6 19:52:05 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
+2000-03-06 J"oern Rennecke <amylaar@redhat.com>
* sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
-2000-03-02 J"orn Rennecke <amylaar@cygnus.co.uk>
+2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
* d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
flag to determine if operand is pc-relative.
(SHORT_U, SHORT_A5S): Removed stray alternatives.
(d30v_opcode_table): Use new *r formats.
-2000-02-28 Nick Clifton <nickc@cygnus.com>
+2000-02-28 Nick Clifton <nickc@redhat.com>
* m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
'signed_overflow_ok_p'.
name of the libtool directory.
* Makefile.in: Rebuild.
-2000-02-24 Nick Clifton <nickc@cygnus.com>
+2000-02-24 Nick Clifton <nickc@redhat.com>
* cgen-opc.c (cgen_set_signed_overflow_ok): New function.
(cgen_clear_signed_overflow_ok): New function.
(cgen_signed_overflow_ok_p): New function.
-2000-02-23 Andrew Haley <aph@cygnus.com>
+2000-02-23 Andrew Haley <aph@redhat.com>
* m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
- m32r-ibld.c,m32r-opc.h: Rebuild.
+ m32r-ibld.c, m32r-opc.h: Rebuild.
2000-02-23 Linas Vepstas <linas@linas.org>
* Makefile.in: Regenerate.
* configure: Likewise.
-2000-02-22 Chandra Chavva <cchavva@cygnus.com>
+2000-02-22 Chandra Chavva <cchavva@redhat.com>
* d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
procedure.
-1999-12-30 Andrew Haley <aph@cygnus.com>
+2000-02-22 Andrew Haley <aph@redhat.com>
* mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
force gp32 to zero.
* dis-buf.c (buffer_read_memory): Change `length' param and all int
vars to unsigned.
-Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
+2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
* sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
(print_insn_ppi): Likewise.
(sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
D_REG_N. Fill in arch field. Add sh-dsp insns.
-2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
+2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
* arm-dis.c: Change flavor name from atpcs-special to
special-atpcs to prevent name conflict in gdb.
(print_insn_thumb): Use the register name entry from the currently
selected flavor for LR and PC.
-2000-02-10 Nick Clifton <nickc@cygnus.com>
+2000-02-10 Nick Clifton <nickc@redhat.com>
* mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
classes.
(print_insn_mcore): Add support for little endian targets.
Add support for MULSH and OPSR classes.
-2000-02-07 Nick Clifton <nickc@cygnus.com>
+2000-02-07 Nick Clifton <nickc@redhat.com>
* arm-dis.c (parse_arm_diassembler_option): Rename again.
Previous delat did not take.
* arm-dis.c (printf_insn_thumb): Prevent double dumping
of raw thumb instructions.
-2000-01-20 Nick Clifton <nickc@cygnus.com>
+2000-01-20 Nick Clifton <nickc@redhat.com>
* mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
(print_insn_big_arm): Check force_thumb.
(print_insn_little_arm): Check force_thumb.
-1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
-
-Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c, m10300-dis.c: Add am33 support.
-
-Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
- (print_insn_hppa): Handle 'B' operand.
-
-1999-11-22 Nick Clifton <nickc@cygnus.com>
-
- * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
-
-1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
-
- * mips-opc.c (I5): New.
- (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
- madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
- pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
-
-Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
-
- * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
- * arm-opc.h (print_insn_arm): Added comment documenting
- the 'X' format just added to arm-dis.c.
-
-1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
-
- * mips-opc.c (la): Create a version that just uses addiu directly.
- (dla): Expand to daddiu if possible.
-
-1999-11-11 Nick Clifton <nickc@cygnus.com>
-
- * mips-opc.c: Add ssnop pattern.
-
-1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
-
- * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
-
-1999-10-29 Nick Clifton <nickc@cygnus.com>
-
- * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
- (d30v_format_tab): Define the SHORT_AR format.
-
-1999-10-28 Nick Clifton <nickc@cygnus.com>
-
- * mcore-dis.c: Remove spurious code introduced in previous delta.
-
-1999-10-27 Scott Bambrough <scottb@netwinder.org>
-
- * arm-dis.c: Include sysdep.h to prevent compile time warnings.
-
-1999-10-18 Michael Meissner <meissner@cygnus.com>
-
- * alpha-opc.c (alpha_operands): Fill in missing initializer.
- (alpha_num_operands): Convert to unsigned.
- (alpha_num_opcodes): Ditto.
- (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
- (insert_rca): Ditto.
- (insert_za): Ditto.
- (insert_zb): Ditto.
- (insert_zc): Ditto.
- (extract_bdisp): Ditto.
- (extract_jhint): Ditto.
- (extract_ev6hwjhint): Ditto.
-
-Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
-
- * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
- 'co', '@'.
-
- * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
-
- * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
-
-Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
-
- * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
- rac/rachi instructions.
- (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
- slae, st and st2w.
-
-1999-10-04 Doug Evans <devans@casey.cygnus.com>
-
- * fr30-asm.c,fr30-desc.h: Rebuild.
- * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
- * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
-
-1999-09-29 Nick Clifton <nickc@cygnus.com>
-
- * sh-opc.h: Fix bit patterns for several load and store
- instructions.
-
-Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
-
- * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
- cleaner code using completer prefixes. Add 'Y'.
-
-Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
-
- * hppa-dis.c (extract_22): New function.
-
- * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
-
- * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
-
- * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
-
- * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
-
- * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
-
- * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
-
- * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
-
- * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
-
- * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
-
-Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
-
- * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
- operand.
-
- * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
-
- * hppa-dis.c: (print_insn_hppa): Add missing break after
- FP register case.
-
- * hppa-dis.c: Finish constifying various completers, register
- names, etc etc.
-
-1999-09-14 Michael Meissner <meissner@cygnus.com>
-
- * configure.in (Canonicalization of target names): Remove adding
- ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
- generates $ac_config_sub with a ${CONFIG_SHELL} already.
- * configure: Regenerate.
-
-Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
-
- * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
-
-1999-09-07 Nick Clifton <nickc@cygnus.com>
-
- * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
- names for the mulu and muls patterns.
-
-1999-09-04 Steve Chamberlain <sac@pobox.com>
-
- * pj-opc.c: New file.
- * pj-dis.c: New file.
- * disassemble.c (disassembler): Handle bfd_arch_pj.
- * configure.in: Handle bfd_pj_arch.
- * Makefile.am: Rebuild dependencies.
- (CFILES): Add pj-dis.c and pj-opc.c.
- (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
- * configure, Makefile.in: Rebuild.
-
-1999-09-04 H.J. Lu <hjl@gnu.org>
-
- * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
-
-Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
-
- * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
-
-1999-08-04 Doug Evans <devans@casey.cygnus.com>
-
- * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
- * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
- * m32r-opinst.c: Rebuild.
-
-Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
-
- * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
- register args by 'f'.
-
- * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
-
- * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
- extract_10U_store): New.
- (print_insn_hppa): Add new completers.
-
- * hppa-dis.c (signed_unsigned_names,mix_half_names,
- saturation_names): New.
- (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
-
- * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
-
- * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
-
- * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
- to decide to print a space.
-
-1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c: Add AMD athlon instruction support.
-
-1999-08-10 Ian Lance Taylor <ian@zembu.com>
-
- From Wally Iimura <iimura@microunity.com>:
- * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
- overflow at end of address space.
- (generic_print_address): Use sprintf_vma.
-
-1999-08-08 Ian Lance Taylor <ian@zembu.com>
-
- * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
- MKDEP. Rebuild dependencies.
- * Makefile.in: Rebuild.
-
-Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
-
- * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
- add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
- unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
- (print_insn_hppa): Add 64 bit condition completers.
-
-Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
-
- * hppa-dis.c (print_insn_hppa): Change condition args to use
- '?' prefix.
-
-Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
-
- * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
- code.
-
-1999-07-21 Ian Lance Taylor <ian@zembu.com>
-
- From Mark Elbrecht:
- * configure.bat: Remove; obsolete.
-
-1999-07-11 Ian Lance Taylor <ian@zembu.com>
-
- * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
- (generic_strcat_address): Add cast to avoid warning.
- * i386-dis.c: Initialize all structure fields to avoid warnings.
- Add ATTRIBUTE_UNUSED as appropriate.
-
-1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
-
- * sparc-dis.c (print_insn_sparc): Differentiate between
- addition and oring when guessing symbol for comment.
-
-1999-07-05 Nick Clifton <nickc@cygnus.com>
-
- * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
- constant.
-
-1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c: Mention intel mode specials in macro char comment.
-
-1999-06-21 Ian Lance Taylor <ian@zembu.com>
-
- * alpha-dis.c: Don't include <stdlib.h>.
- * arm-dis.c: Include "sysdep.h".
- * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
- "sysdep.h".
- * Makefile.am: Rebuild dependencies.
- * Makefile.in: Rebuild.
-
-1999-06-16 Nick Clifton <nickc@cygnus.com>
-
- * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
- SWIs.
-
-1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
-
- * arm-dis.c (arm_regnames): Turn into a pointer to a register
- name set.
- (arm_regnames_standard): New variable: Array of ARM register
- names according to ARM instruction set nomenclature.
- (arm_regnames_apcs): New variable: Array of ARM register names
- according to ARM Procedure Call Standard.
- (arm_regnames_raw): New variable: Array of ARM register names
- using just 'r' and the register number.
- (arm_toggle_regnames): New function: Toggle the chosen register set
- naming scheme.
- (parse_disassembler_options): New function: Parse any target
- disassembler command line options.
- (print_insn_big_arm): Call parse_disassembler_options if any
- are defined.
- (print_insn_little_arm): Call parse_disassembler_options if any
- are defined.
-
-1999-06-13 Ian Lance Taylor <ian@zembu.com>
-
- * i386-dis.c (FWAIT_OPCODE): Define.
- (used_prefixes): New static variable.
- (fetch_data): Don't print an error message if we have already
- fetched some bytes successfully.
- (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
- (prefix_name): New static function.
- (print_insn_i386): If setjmp fails, indicating a data error, but
- we have managed to fetch some bytes, print the first one as a
- prefix or a .byte pseudo-op. If fwait is followed by a non
- floating point instruction, print the first prefix. Set
- used_prefixes when prefixes are used. If any prefixes were not
- used after disassembling the instruction, print the first prefix
- instead of printing the instruction.
- (putop): Set used_prefixes when prefixes are used.
- (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
- (OP_DIR, OP_SIMD_Suffix): Likewise.
-
-1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
-
- * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
- Support signx %reg, clruw %reg.
-
-1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
-
- * sparc-opc.c: Add aliases Solaris as supports.
-
-Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
-
- * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
- * Makefile.in: Regenerated.
-
-1999-06-03 Philip Blundell <philb@gnu.org>
-
- * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
- when target is PC-relative.
-
-1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
-
- * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
- MOVE MACSR,CCR.
-
- * m68k-dis.c (fetch_arg): Add places `n', `o'.
-
- * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
- Add mcf5206e to appropriate instructions.
- Add alias for MAC, MSAC.
-
- * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
- `N'.
-
- * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
- macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
-
- * m68k-dis.c: Add format `u' and places `h', `m', `M'.
-
-1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c (Ed): Define.
- (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
- (Rw): Remove.
- (OP_rm): Rename to OP_Rd.
- (ONE): Remove.
- (OP_ONE): Remove.
- (putop): Add const to template and p.
- (print_insn_x86): Delete.
- (print_insn_i386): Merge old function print_insn_x86. Add const
- to dp.
- (struct dis386): Add const to name.
- (dis386_att, dis386_intel): Add const.
- (dis386_twobyte_att, dis386_twobyte_intel): Add const.
- (names32, names16, names8, names_seg, index16): Add const.
- (grps, prefix_user_table, float_reg): Add const.
- (float_mem_att, float_mem_intel): Add const.
- (oappend): Add const to s.
- (OP_REG): Add const to s.
- (ptr_reg): Add const to s.
- (dofloat): Add const to dp.
- (OP_C): Don't skip modrm, it's now done in OP_Rd.
- (OP_D): Ditto.
- (OP_T): Ditto.
- (OP_Rd): Check for valid mod. Call Op_E to print.
- (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
- (OP_MS): Check for valid mod. Call Op_EM to print.
- (OP_3DNowSuffix): Set obufp and use oappend rather than
- strcat. Call BadOp() for errors.
- (OP_SIMD_Suffix): Likewise.
- (BadOp): New function.
-
-1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c (dis386_intel): Remove macro chars, except for
- jEcxz. Change cWtR and cRtd to cW and cR.
- (dis386_twobyte_intel): Remove macro chars here too.
- (putop): Handle R and W macros for intel mode.
-
- * i386-dis.c (SIMD_Fixup): New function.
- (dis386_twobyte_att): Use it on movlps and movhps, and change
- Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
- (dis386_twobyte_intel): Same here.
-
- * i386-dis.c (Av): Remove.
- (Ap): remove lptr.
- (lptr): Remove.
- (OPSIMD): Define.
- (OP_SIMD_Suffix): New function.
- (OP_DIR): Remove dead code.
- (eAX_reg..eDI_reg): Renumber.
- (onebyte_has_modrm): Table numbering comments.
- (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
- (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
- checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
- and handle SIMD cmp insns in OP_SIMD_Suffix.
- (info->bytes_per_line): Bump from 5 to 6.
- (OP_None): Remove.
- (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
- (OP_3DNowSuffix): Ensure mnemonic index unsigned.
-
- PIII SIMD support from Doug Ledford <dledford@redhat.com>
- * i386-dis.c (XM, EX, None): Define.
- (OP_XMM, OP_EX, OP_None): New functions.
- (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
- (GRP14): Rename to GRPAMD.
- (GRP*): Add USE_GROUPS flag.
- (PREGRP*): Define.
- (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
- (twobyte_has_modrm): Add SIMD entries.
- (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
- (grps): Add SIMD insns.
- (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
- oappend repz if uses_f3_prefix. Add code to handle new groups for
- SIMD insns.
-
- From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
- * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
- operand from Av to Jv.
-
-1999-05-07 Nick Clifton <nickc@cygnus.com>
-
- * mcore-dis.c (print_insn_mcore): Use .short to display
- unidentified instructions, not .word.
-
-1999-04-26 Tom Tromey <tromey@cygnus.com>
-
- * aclocal.m4, configure: Updated for new version of libtool.
-
-1999-04-14 Doug Evans <devans@casey.cygnus.com>
-
- * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
- * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
-
-Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
-
- * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
- instructions.
-
-1999-04-10 Doug Evans <devans@casey.cygnus.com>
-
- * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
- * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
-
-1999-04-06 Ian Lance Taylor <ian@zembu.com>
-
- * opintl.h (LC_MESSAGES): Never define.
-
-1999-04-04 Ian Lance Taylor <ian@zembu.com>
-
- * i386-dis.c (intel_syntax, open_char, close_char): Make static.
- (separator_char, scale_char): Likewise.
- (print_insn_x86): Likewise.
- (print_insn_i386): Likewise. Add declaration.
-
-1999-03-26 Doug Evans <devans@casey.cygnus.com>
-
- * fr30-dis.c: Rebuild.
- * m32r-dis.c: Rebuild.
-
-1999-03-23 Ian Lance Taylor <ian@zembu.com>
-
- * m68k-opc.c: Change compare instructions to use "@s" rather than
- ";s" when used with an immediate operand.
-
-1999-03-22 Doug Evans <devans@casey.cygnus.com>
-
- * cgen-opc.c (cgen_set_cpu): Delete.
- (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
- * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
- Rebuild.
- * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
- Rebuild.
- * po/opcodes.pot: Rebuild.
-
-1999-03-16 Martin Hunt <hunt@cygnus.com>
-
- * d30v-opc.c (mvtsys): Remove FLAG_LKR.
-
-1999-03-11 Doug Evans <devans@casey.cygnus.com>
-
- * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
- (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
- (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
- * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
- * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
- * m32r-opinst.c: Rebuild.
-
-1999-02-25 Doug Evans <devans@casey.cygnus.com>
-
- * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
- (cgen_hw_lookup_by_num): Rewrite.
- * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
- * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
- * m32r-opinst.c: Rebuild.
-
-Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
-
- * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
- (insert_jhint): Fix insertion mask.
- * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
-
-1999-02-10 Doug Evans <devans@casey.cygnus.com>
-
- * Makefile.in: Rebuild.
-
-1999-02-09 Doug Evans <devans@casey.cygnus.com>
-
- * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
- * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
- * Makefile.am: Remove references to them.
- (HFILES): Add fr30-desc.h,m32r-desc.h.
- (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
- m32r-opinst.c.
- (ALL_MACHINES): Update.
- * configure.in: Redo handling of cgen_files.
- (bfd_i960_arch): Delete i960c-*.lo files.
- * configure: Regenerate.
- * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
- (hash_insn_array): Rewrite.
- * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
- (hash_insn_array): Rewrite.
- * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
- (cgen_lookup_insn,cgen_get_insn_operands): Define here.
- (cgen_lookup_get_insn_operands): Ditto.
- * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
- * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
- * po/POTFILES.in: Rebuild.
- * po/opcodes.pot: Rebuild.
-
-Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.am: Rebuild dependencies.
- (HFILES): Add fr30-opc.h.
- (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
- * Makefile.in: Rebuild.
-
- * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
- Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
- AC_PROG_INSTALL.
- * acconfig.h: Remove.
- * configure: Rebuild with current autoconf/automake.
- * aclocal.m4: Likewise.
- * config.in: Likewise.
- * Makefile.in: Likewise.
-
-Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c: Correct move (not movew) to status word on 5200.
-
-Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
-
- * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
- * i386-dis.c (x_mode): Define.
- (dis386): Remove.
- (dis386_att): New.
- (dis386_intel): New.
- (dis386_twobyte): Remove.
- (dis386_twobyte_att): New.
- (dis386_twobyte_intel): New.
- (print_insn_x86): Use new arrays.
- (float_mem): Remove.
- (float_mem_intel): New.
- (float_mem_att): New.
- (dofloat): Use new float_mem arrays.
- (print_insn_i386_att): New.
- (print_insn_i386_intel): New.
- (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
- (putop): Handle intel syntax.
- (OP_indirE): Handle intel syntax.
- (OP_E): Handle intel syntax.
- (OP_I): Handle intel syntax.
- (OP_sI): Handle intel syntax.
- (OP_OFF): Handle intel syntax.
-
-1999-01-27 Doug Evans <devans@casey.cygnus.com>
-
- * fr30-opc.h,fr30-opc.c: Rebuild.
- * i960c-opc.h,i960c-opc.c: Rebuild.
- * m32r-opc.c: Rebuild.
-
-Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
-
- * hppa-dis.c: revert HP merge changes until HP gives us
- an updated file.
-
-1999-01-19 Nick Clifton <nickc@cygnus.com>
-
- * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
- offsets as well as symbloic address.
-
-Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
-
- * hppa-dis.c: fix comments and some indentation.
-
-1999-01-12 Doug Evans <devans@casey.cygnus.com>
-
- * fr30-opc.c,i960c-opc.c: Regenerate.
-
-1999-01-11 Doug Evans <devans@casey.cygnus.com>
-
- * fr30-opc.c: Regenerate.
-
-1999-01-06 Doug Evans <devans@casey.cygnus.com>
-
- * m32r-dis.c: Regenerate.
-
-1999-01-05 Doug Evans <devans@casey.cygnus.com>
-
- * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
- * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
- * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
-
-1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * configure.in: Require autoconf 2.12.1 or higher.
-
-1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
-
- * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
-
-Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-opc.c: Regenerated.
-
-1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
-
- * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
-
-1998-12-15 Dave Brolley <brolley@cygnus.com>
-
- * fr30-opc.c,fr30-opc.h: Regenerated.
-
-1998-12-14 Dave Brolley <brolley@cygnus.com>
-
- * fr30-opc.c,fr30-opc.h: Regenerated.
-
-Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-opc.c,fr30-opc.h: Regenerated.
-
-Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.c: Regenerate.
-
-Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
-
- * dis-buf.c (generic_strcat_address): reformat to GNU coding
- conventions. change sprintf call to an sprintf_vma call.
-
-Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
-
-Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
-
- The following changes were made by
- Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
- David Taylor <taylor@texas.cygnus.com>, and
- Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
- merge in changes by HP; HP did not create ChangeLog entries.
-
- * dis-buf.c (generic_strcat_address): new function.
-
- * hppa-dis.c: Changes to improve hppa disassembly.
- Changed formatting in : reg_names, fp_reg_names,control_reg,
- New variables : sign_extension_names, deposit_names, conversion_names
- float_test_names, compare_cond_names_double, add_cond_names_double,
- logical_cond_names_double, unit_cond_names_double,
- branch_push_pop_names, saturation_names, shift_names, mix_names,
- New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
- Move some definitions to libhppa.h: GET_FIELD, GET_BIT
- (fput_const): renamed as fput_hex_const
- (print_insn_hppa):
- - use the macros fputs_filtered and
- fput_decimal_const whenever possible; calls to sign_extend require
- 2 params -- add a missing second param of 0.
- - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
- architecture version number of current machine. HP folks are
- trying to handle situation where the target program was compiled
- for PA 1.x (32-bit), but is running on a PA 2.0 machine and
- visa versa.
- - added new cases : 'g', 'B', 'm'
- - added cases specifically for PA 2.0
- - changed the following cases : '"', 'n', 'N', 'p', 'Z',
- - calls to fput_const become calls to fput_hex_const
-
-1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
-
- * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
- (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
- (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
- * Makefile.in: Rebuilt.
- * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
- i960-dis.c to ta.
- * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
- * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
-
-Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
-
-Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
-
- * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
- From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
-
-Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * fr30-opc.c: Regenerate.
-
-Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
-
-Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
-
-Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
-
-1998-11-30 Doug Evans <devans@casey.cygnus.com>
-
- * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
- CGEN_INSN_BASE_VALUE.
- * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
- * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
-
-Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
-
-Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-asm.c,fr30-dis.c: Regenerated.
-
-Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
-
-1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
-
- * fr30-opc.c: Regenerated.
-
-Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-opc.c: Regenerated.
- * fr30-opc.h: Regenerated.
- * fr30-dis.c: Regenerated.
- * fr30-asm.c: Regenerated.
-
-Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
-
- * mips-opc.c (sync.p,sync.l): Swap insn values.
-
-1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
-
- * fr30-opc.c: Regenerate.
-
-Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-opc.c: Regenerated.
- * fr30-opc.h: Regenerated.
-
-1998-11-18 Doug Evans <devans@casey.cygnus.com>
-
- * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
- * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
-
-Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-opc.c: Regenerated.
-
-Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
-
- * fr30-opc.c: Regenerated.
- * fr30-opc.h: Regenerated.
- * fr30-dis.c: Regenerated.
- * fr30-asm.c: Regenerated.
-
-Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
-
- * po/opcodes.pot: Regenerated.
- * fr30-opc.c: Regenerated.
- * fr30-opc.h: Regenerated.
- * fr30-dis.c: Regenerated.
- * fr30-asm.c: Regenerated.
-
-Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
-
- * disassemble.c (disassembler): Add support for FR30 target.
-
-Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
- * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
-
-Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
-
- * po/opcodes.pot: Regenerate.
- * po/POTFILES.in: Regenerate.
- * fr30-opc.c: Regenerate.
- * fr30-opc.h: Regenerate.
-
-Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-asm.c: Regenerate.
-
-Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
-
- * configure.in: Added case for bfd_fr30_arch.
- * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
- (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
- (CLEANFILES): Added stamp-fr30.
- (FR30_DEPS): Added.
- * fr30-asm.c: New file.
- * fr30-dis.c: New file.
- * fr30-opc.c: New file.
- * fr30-opc.h: New file.
- * po/POTFILES.in: Regenerated
- * po/opcodes.pot: Regenerated
-
-Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
-
- * configure.in: detect cygwin* instead of cygwin32*
- * configure: regenerate
-
-Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
-
- * mips-opc.c (IS_M): Added.
-
-Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
-
- * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
-
-Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
-
- * m32r-opc.h,m32r-opc.c: Regenerate.
-
-Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c (OP_3DNowSuffix): New static function.
- (OPSUF): Define.
- (GRP14): Define.
- (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
- (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
- (insn_codep): New static variable.
- (print_insn_x86): Init insn_codep after prefixes.
- (grps): Add GRP14 entries for prefetch, prefetchw.
- (OP_REG): Reformat.
-
- From Jeff B Epler <jepler@usgs.gov>
- * i386-dis.c (Suffix3DNow): New table.
-
-Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
-
- * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
-
-Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
-
- * d10v-dis.c (print_operand): If num is nonzero, then
- add OPERAND_ACC1, not OPERAND_ACC0.
-
-Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
-
- * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
- insns.
-
-Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
-
- * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
- class.
-
-Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
-
-1998-09-09 Michael Meissner <meissner@cygnus.com>
-
- * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
- to/from SPRs.
-
-Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
-
- * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
- object files.
- (print_insn_little_arm): Detect Thumb symbols in elf object
- files.
-
-Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
-
- * alpha-dis.c (print_insn_alpha): Use the machine type to
- decide which PALcode set to include.
-
-Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
-
- * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
-
-Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
-
- * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
- MSUB and MSUBS instructions.
-
-Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * ppc-opc.c (powerpc_operands): Omit parens around additions in
- operand name macros.
-
-Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
-
- From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
- * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
- +, -, and d for ColdFire.
-
- From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
- * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
- (extract_mbe): Likewise.
-
-Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
-
- * m10300-opc.c: First cut at UDF instructions.
-
-Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.c: Regenerate (remove semantic descriptions).
-
-Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
-
- * arm-dis.c (print_insn_big_arm): Fix indentation.
- (print_insn_little_arm): Likewise.
-
-Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
-
- * arm-dis.c (print_insn_big_arm): Check for thumb symbol
- attributes.
- (print_insn_little_arm): Likewise.
-
-Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
-
- Move all global state data into opcode table struct, and treat
- opcode table as something that is "opened/closed".
- * cgen-asm.c (all fns): New first arg of opcode table descriptor.
- (cgen_asm_init): Delete.
- (cgen_set_parse_operand_fn): New function.
- * cgen-dis.c (all fns): New first arg of opcode table descriptor.
- (cgen_dis_init): Delete.
- * cgen-opc.c (all fns): New first arg of opcode table descriptor.
- (cgen_current_{opcode_table_mach,endian}): Delete.
- * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
-
-Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
- instructions.
-
-Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Add entries for "no_match_operands" field in
- the opcode table.
-
-Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
-
-Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
-
- * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
-
-Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
- the first prefix.
- (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
- than `fnstsw %eax'.
- (OP_J): Remove unnecessary subtraction when 16-bit displacement
- will be masked later.
-
-Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
-
- * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
-
-Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
-
- * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
-
-Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-dis.c: Only recognize instructions from the currently
- selected machine.
- * m10300-opc.c: Add field indicating the particular variant of
- the mn10300 each instruction is available on.
-
-Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: For bfd_vax_arch, build vax-dis.lo.
- * Makefile.am: Rebuild dependencies.
- (CFILES): Add vax-dis.c.
- (ALL_MACHINES): Add vax-dis.lo.
- * aclocal.m4: Rebuild with current libtool.
- * configure, Makefile.in: Rebuild.
-
-Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
-
- * vax-dis.c: New file, from work by Pauline Middelink
- <middelin@polyware.iaf.nl>.
- * disassemble.c (ARCH_vax): Define if ARCH_all.
- (disassembler): Add case for ARCH_vax.
- * makefile.vms: Support compilation on vms/vax.
-
-Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
-
- * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
- related to sign extension and the size of ints.
-
-Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
- instructions. Support (sp) addressing mode by expanding it into
- (0,sp).
-
-Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
-
-Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
-
- * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
-
-1998-06-18 Ulrich Drepper <drepper@cygnus.com>
-
- * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
- sysexit.
-
-Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
-
- * mips-dis.c (print_insn_little_mips): Previously, instruction
- printing references the symbol table to determine whether the
- instruction resides in a block regular instructions or mips16
- instructions. However, when the disassembler gets used in other
- environments where the symbol table is not present, we no longer
- rely in the symbol table, rather, use the low bit of the
- instructions address to guess. There should be no change for usage
- of the disassembler in host based programs, gdb, objdump.
- (print_insn_big_mips): ditto.
- (print_insn_mips): ditto
-
-Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
-
- * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
-
-Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
-
-Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c (index16): Add '%' to register names. Use ','
- instead of '+'.
-
-Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c: Don't print opcode suffix when we can figure out the
- size (and gas can!) by register operands, or from the default
- size.
- (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
- macro to 'E'.
- (dis386, dis386_twobyte, grps): Use new suffix macros.
- (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
- consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
- order of cmps operands to agree with Intel docs. Correct operand
- of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
- agree with Intel docs.
- (print_insn_x86): Print orphan fwait before other prefixes.
- Return correct byte count for orphan fwait with prefixes. Don't
- print `bound' operands in reverse order.
- (ckprefix): Stop accumulating prefixes if we get fwait.
- (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
-
-Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
-
- * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
- ($(PACKAGE).pot): Unconditionally depend on POTFILES.
-
-Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- Fix problems when bfd_vma is wider than long.
- * i386-dis.c: Make op_address and start_pc unsigned.
- (set_op): Make parameter unsigned.
- (print_insn_x86): Cast to bfd_vma when passing a value to
- print_address_func.
- * ns32k-dis.c (CORE_ADDR): Don't define.
- (print_insn_ns32k): Change type of addr to bfd_vma. Use
- bfd_scan_vma to read back address.
- (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
- to format it.
- * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
- (NEXTULONG): New definition.
- (print_insn_m68k): Avoid overflow when computing third argument of
- print_insn_arg.
- (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
- Use disp instead of val to store offset values.
- (print_indexed): Use base_disp instead of word to store base
- displacement, to avoid overflow.
- * m10300-dis.c (disassemble): Cast value to long when computing
- pc-relative address, to get correct sign extension.
-
-Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.c: Regenerate.
-
-Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
-
- * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
- 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
-
-Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
-
- * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
-
-Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
- functions to void.
- (OP_DSreg): Rename from OP_DSSI.
- (OP_ESreg): Rename from OP_ESDI.
- (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
- (DSBX): Define.
- (append_seg): Rename from append_prefix.
- (ptr_reg): New function.
- (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
- Add DSBX for xlat.
- (PREFIX_ADDR): Rename from PREFIX_ADR.
- (float_reg): Add non-broken opcodes for people who don't want
- UNIXWARE_COMPAT.
-
-Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
- 68000/68008/68010.
-
-Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
-
- * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
-
-Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
-
- * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
- 0; produce error message for shifts of size 32 (or 64 for 64-bit
- shifts), because the hardware doesn't support them.
-
-Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
-
- * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
- LONG_2, LONG_2b formats to use this new operand.
-
-Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
-
- * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
-
-Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
-
- * sparc-dis.c (print_insn_sparc): big endian instruction / little
- endian data support.
-
-Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
-
- * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
- and SHORT_B3b formats to use Rb instead of Ra.
-
- Add FLAG_MUL16 to MUL2XH opcode.
-
- Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
- to existing 1.1.1 parallelisation prohibition procedure.
-
-Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-asm.c,m32r-dis.c: Regenerate.
-
-Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
- with a shift count of 0.
-
-Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
- (cgen_hw_lookup_by_num): New function.
-
-Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
-
-Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
-
- * sparc-dis.c (print_insn_sparc): Always fetch instructions
- as big-endian on SPARClite.
-
-Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
-
- * d30v-opc.c (pre_defined_register): Remove alias for r0.
-
-Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
-
- * po/Make-in (install-info): New target.
-
-Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
- * configure: Rebuild.
-
-Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
- variety of ISA2 instructions to set bottom ten bits of trap code.
-
-Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.am (config.status): Add explicit target so that
- config.status depends upon bfd/configure.in.
- * Makefile.in: Rebuild.
-
-Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
- instructions to set bottom ten bits of break code.
- * mips-dis.c (print_insn_arg): Implement 'q' operand format used
- for above optional argument.
-
-Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
-
- * makefile.vms: Run dec c with /nodebug.
-
-Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
-
- * Makefile.in: Rebuilt.
- * Makefile.am: Regenerated dependencies with mkdep.
-
- * opintl.h (_): Define as dgettext.
-
-Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
-
- * cgen-asm.c: Internationalised.
- * m32r-asm.c: Internationalised.
- * m32r-dis.c: Internationalised.
- * m32r-opc.c: Internationalised.
-
- * aclocal.m4: Regenerated.
- * configure: Regenerated.
- * Makefile.am (POTFILES): Remove inclusion of BFD_H.
- * Makefile.in: Rebuild.
- * po/POTFILES.in: Rebuilt using rule in Makefile.in.
- * po/opcodes.pot: Rebuilt after changing POTFILES.in.
-
-Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
- after AC_PROG_CC.
- * aclocal.m4, configure: Rebuild with current tools.
-
-Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
-
- * opintl.h: New file - contains internationalisation macros used
- by source files in this directory.
- * po/: New subdirectory - contains internationalisation files.
- * po/Make-in: New file - Makefile constructor.
- * po/POTFILES.in: New file - list of files in opcodes directory
- that should be scan for internationalisation macros.
- * po/opcodes.pot: New file - list of internationisation strings
- found in files mentioned in po/POTFILES.in.
- * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
- entry. Add intl directory to include paths.
- * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
- HAVE_STRCPY, HAVE_LC_MESSAGES
- * configure.in: Add rule to build Makefile in po subdirectory.
- * Makefile.in: Rebuilt.
- * aclocal.m4: Rebuilt.
- * config.in: Rebuilt.
- * configure: Rebuilt.
- * alpha-opc.c: Internationalised.
- * arc-dis.c: Internationalised.
- * arc-opc.c: Internationalised.
- * arm-dis.c: Internationalised.
- * cgen-asm.c: Internationalised.
- * d30v-dis.c: Internationalised.
- * dis-buf.c: Internationalised.
- * h8300-dis.c: Internationalised.
- * h8500-dis.c: Internationalised.
- * i386-dis.c: Internationalised.
- * m10200-dis.c: Internationalised.
- * m10300-dis.c: Internationalised.
- * m68k-dis.c: Internationalised.
- * m88k-dis.c: Internationalised.
- * mips-dis.c: Internationalised.
- * ns32k-dis.c: Internationalised.
- * opintl.h: Internationalised.
- * ppc-opc.c: Internationalised.
- * sparc-dis.c: Internationalised.
- * v850-dis.c: Internationalised.
- * v850-opc.c: Internationalised.
-
-Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
- (asm_hash_table_entries): New variable.
- (cgen_asm_init): Free asm_hash_table_entries.
- (hash_insn_array,hash_insn_list): New functions.
- (build_asm_hash_table): Use them. Hash macro insns as well.
- (cgen_asm_lookup_insn): Update.
- * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
- (dis_hash_table_entries): New variable.
- (cgen_dis_init): Free dis_hash_table_entries.
- (hash_insn_array,hash_insn_list): New functions.
- (build_dis_hash_table): Use them. Hash macro insns as well.
- (cgen_dis_lookup_insn): Update.
- * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
- (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
- (cgen_macro_insn_count): New function.
- * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
-
-Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c (OP_DSSI): Print segment override.
-
-Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
-
- * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
- operator.
-
-Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
- (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
- * configure.in: Define and substitute WIN32LDFLAGS and
- WIN32LIBADD.
- * aclocal.m4: Rebuild with new libtool.
- * configure, Makefile.in: Rebuild.
-
-Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.c: Regenerate.
-
-Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
-
- * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
- before trying to copy it.
- * Makefile.in: Rebuild.
-
-Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
-
- * m32r-opc.c: Use signed immediate values for CMPUI instruction.
-
-Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
-
- * ns32k-dis.c (bit_extract_simple): New function to extract bits
- from an arbitrary valid buffer instead of fetching them on demand
- using fetch_data().
- (invalid_float): use bit_extract_simple() instead of bit_extract().
-
-Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
-
- From H.J. Lu <hjl@gnu.org>:
- * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
- to Ev for both.
-
-Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * Branched binutils 2.9.
-
-Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
-
- * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
- disassembling last 4 bytes of a section.
-
-Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
-
- Fix some gcc -Wall warnings:
- * arc-dis.c (print_insn): Add casts to avoid warnings.
- * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
- * d10v-dis.c (dis_long, dis_2_short): Likewise.
- * m10200-dis.c (disassemble): Likewise.
- * m10300-dis.c (disassemble): Likewise.
- * ns32k-dis.c (print_insn_ns32k): Likewise.
- * ppc-opc.c (insert_ral, insert_ram): Likewise.
- * cgen-dis.c (build_dis_hash_table): Remove used local variables.
- * cgen-opc.c (cgen_keyword_search_next): Likewise.
- * d10v-dis.c (dis_long, dis_2_short): Likewise.
- * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
- * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
- * tic80-dis.c (print_one_instruction): Likewise.
- * w65-dis.c (print_operand): Likewise.
- * z8k-dis.c (fetch_data): Likewise.
- * a29k-dis.c: Add return type for find_byte_func_type.
- * arc-opc.c: Include <stdio.h>. Remove declarations of
- insert_multshift and extract_multshift.
- * d30v-dis.c (lookup_opcode): Parenthesize assignments in
- conditionals.
- (extract_value): Fully parenthesize expression.
- * h8500-dis.c (print_insn_h8500): Initialize local variables.
- * h8500-opc.h (h8500_table): Fully bracket initializer.
- * w65-opc.h (optable): Likewise.
- * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
- * i386-dis.c (OP_E): Initialize local variables.
- * m10200-dis.c (print_insn_mn10200): Likewise.
- * mips-dis.c (print_insn_mips16): Likewise.
- * sh-dis.c (print_insn_shx): Likewise.
- * v850-dis.c (print_insn_v850): Likewise.
- * ns32k-dis.c (print_insn_arg): Declare.
- (get_displacement, invalid_float): Declare.
- (list_search, sign_extend, flip_bytes): Declare return type.
- (get_displacement): Likewise.
- (print_insn_arg): Likewise. Make d int. Fix sprintf format
- string.
- (print_insn_ns32k): Make i unsigned.
- (invalid_float): Make static. Declare type of val.
- * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
- on each for iteration.
- * tic30-dis.c (get_indirect_operand): Likewise.
- * z8k-dis.c (print_insn_z8001): Declare return type.
- (print_insn_z8002): Likewise.
- (unparse_instr): Fix sprintf format strings.
-
-Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c: Add "sync.l" and "sync.p".
-
-Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-dis.c (print_insn_m68k): Use info->mach to select the
- default m68k variant to recognize.
-
- * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
- (ctrl, cobr, mem, ea): Likewise.
- (print_addr): Likewise. Remove cast.
- (ea): Cast argument of print_addr to bfd_vma.
-
- * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
- variable value.
- (cgen_parse_unsigned_integer): Likewise.
- (cgen_parse_address): Likewise.
-
-Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * i960-dis.c (ctrl): Add full braces to structure initialization.
- (cobr, mem, reg): Likewise.
- (ea): Correct parenthesization in expression.
-
- * cgen-asm.c: Include <ctype.h>.
- (build_asm_hash_table): Remove unused local variable i.
- (cgen_parse_keyword): Add casts to avoid warnings.
-
- * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
- symbol. Fix indentation.
- (print_insn_little_arm): Likewise.
-
-Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Use AM_DISABLE_SHARED.
- * aclocal.m4, configure: Rebuild with libtool 1.2.
-
-Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
-
- These patches are courtesy of Jonathan Walton and Tony Thompson
- (athompso@cambridge.arm.com).
-
- * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
- relative addresses.
-
- * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
- both the offset and the label closest to the destination.
-
-Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
-
- * m32r-opc.h: Regenerate.
-
-Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
-
-Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
-
- * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
- assume that info->symbols is non-empty.
-
-Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
-
- * alpha-opc.c (cvtqs) There is no such thing.
- (cvttq): Missing most of the /*d variants.
-
-Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
-
- * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
- delayed branches or jumps.
-
-Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
- to *info->symbols.
- * mips-dis.c (print_insn_{big,little}_mips): Likewise.
- * tic30-dis.c (print_branch): Likewise.
-
-Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
-
- * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
- saved_symbol code as it is no longer needed.
-
-Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen-asm.c: Include symcat.h.
- * cgen-dis.c,cgen-opc.c: Ditto.
- * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
-
-Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
-
-Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.[ch]: Regenerate.
-
-Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
- arguments. Don't perform validation here.
- * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
-
-Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.c: Regenerate.
-
-Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.am (AUTOMAKE_OPTIONS): Define.
- * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
-
-Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
-
- * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
-
-Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Get the version number from BFD.
- * configure: Rebuild.
-
- From H.J. Lu <hjl@gnu.org>:
- * Makefile.am (libopcodes_la_LDFLAGS): Define.
- * Makefile.in: Rebuild.
-
-Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
-
- * m32r-opc.c: Regenerate.
- * m32r-opc.h: Regenerate.
-
-Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.c: Regenerate.
-
-Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
-
- Fix rac to accept only a0:
- * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
- Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
- Introduce OPERAND_GPR.
- * d10v-dis.c (print_operand): Likewise.
-
-Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
- (cgen_hw_lookup): Make result const.
- * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
-
-Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * configure, aclocal.m4: Rebuild with new libtool.
-
-Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
-
- * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
- instructions use a PC relative branch, not absolute.
-
-Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Set libtool_enable_shared rather than
- libtool_shared. Remove diversion hack.
- * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
-
-Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
- * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
-
-Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
-
- * tic30-dis.c: New file.
- * disassemble.c (disassembler): Add bfd_arch_tic30 case.
- * configure.in: Handle bfd_tic30_arch.
- * Makefile.am: Rebuild dependencies.
- (CFILES): Add tic30-dis.c
- (ALL_MACHINES): Add tic30-dis.lo.
- * configure, Makefile.in: Rebuild.
-
-Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.h (HAVE_CPU_M32R): Define.
-
-Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c (insertion routines): If both alignment and size is
- wrong then report this.
-
-Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
- Only recognize instructions for the current target_processor.
-
-Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
-
- * d10v-dis.c (PC_MASK): Correct value.
- (print_operand): If there's a reloc, don't calculate the
- address because they could be in different sections.
-
-Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
- instruction after the 4650's "mul" instruction; nobody's using the
- 4010 these days. If object files someday indicate which processor
- variant they're intended for, we can do a better job at this.
-
-Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
- table provided entry size. Use CGEN_INSN_MNEMONIC.
- (cgen_parse_keyword): Rewrite.
- * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
- table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
- * cgen-opc.c: Clean up pass over `struct foo' usage.
- (cgen_keyword_lookup_value): Handle "" entry.
- (cgen_keyword_add): Likewise.
-
-Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c: Add FP_D to s.d instruction flags.
-
-Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-opc.c (halt, pulse): Enable them on the 68060.
-
-Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
- PC relative offset forms before the 15 bit forms. An assembler command
- line option now chooses the default.
-
-Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
-
- * d30v-opc.c (d30v_opcode_table): Set new flags bits
- FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
-
-1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
-
- * configure: Only build libopcodes shared if --enable-shared's value
- was `yes', or was set to `*opcodes*'.
- * aclocal.m4: Likewise.
- * NOTE: this really needs to be fixed in libtool/libtool.m4, the
- original source of this bit of code. It's not clear what the best fix
- would be, though.
-
-Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
- (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
- offset forms before the 15 bit forms, to default to the long forms.
-
-Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
-
- * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
-
-Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
-
- * arm-dis.c (print_insn_little_arm): Prevent examination of stored
- symbol if none is present.
- (print_insn_big_arm): Prevent examination of stored symbol if
- none is present.
-
-Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
-
- * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
-
-Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
-
- * disassemble.c: Remove disasm_symaddr() function.
-
- * arm-dis.c: Use info->symbol instead of info->flags to determine
- if disassmbly should be in Thumb or Arm mode.
-
-Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
-
- * arm-dis.c: Add support for disassembling Thumb opcodes.
- (print_insn_thumb): New function.
-
- * disassemble.c (disasm_symaddr): New function.
-
- * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
- (thumb_opcodes): Table of Thumb opcodes.
-
-Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-opc.c (btst): Change Dd@s to Dd;b.
-
- * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
- and 'v' as operand types.
-
-Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
- <olivier.carmona@di.epfl.ch>.
- * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
- which has a two word opcode with a one word argument.
-
-Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
-
- * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
- unsigned, not signed.
- (d30v_format_table): Add SHORT_CMPU cases for cmpu.
-
-Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
-
- * d10v-dis.c (print_operand):
- Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
-
-Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
-
- * d10v-opc.c (OPERAND_FLAG): Split into:
- (OPERAND_FFLAG, OPERAND_CFLAG) .
- (FSRC): Split into:
- (FFSRC, CFSRC).
-
-Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c: Move the INSN_MACRO ISA value to the membership
- field for all INSN_MACRO's.
- * mips16-opc.c: same
-
-Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c (sync,cache): These are 3900 insns.
-
-Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
-
- sh-opc.h (sh_table): Remove ftst/nan.
-
-Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
-
- * mips-opc.c (ffc, ffs): Fix mask.
-
-Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
-
- * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
- control registers.
-
-Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
-
- * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
- (WR_HILO, RD_HILO, MOD_HILO): New macros.
-
-Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
-
- * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
- (WR_HILO, RD_HILO, MOD_HILO): New macros.
-
-Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-dis.c (disassemble): Replace // with /* ... */
-
-Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
-
- * sparc-opc.c: Add wr & rd for v9a asr's.
- * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
- (v9a_asr_reg_names): New variable.
- Patch from David Miller <davem@vger.rutgers.edu>.
-
-Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
-
- * sparc-opc.c (v9notv9a): New insn type.
- (IMPDEP): Move to the end to not conflict with edge8 et al.
- Patch from David Miller <davem@vger.rutgers.edu>.
-
-Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
-
-Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
-
-Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-dis.c (disassemble): Use new symbol_at_address_func() field
- of disassemble_info structure to determine if an overlay address
- has a matching symbol in low memory.
-
- * dis-buf.c (generic_symbol_at_address): New (dummy) function for
- new symbol_at_address_func field in disassemble_info structure.
-
-Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c (extract_d22): Use signed arithmatic.
-
-Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c: Three op mult is not an ISA insn.
-
-Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c: Fix formatting.
-
-Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
- than assuming that char is signed. Explicitly sign extend 16 bit
- values, rather than assuming that short is 16 bits.
- (OP_sI, OP_J, OP_DIR): Likewise.
-
-Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-dis.c (v850_sreg_names): Use symbolic names for higher
- system registers.
-
-Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c: Fix typo in comment.
-
- * v850-dis.c (disassemble): Add test of processor type when
- determining opcodes.
-
-Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Use a diversion to set enable_shared before the
- arguments are parsed.
- * configure: Rebuild.
-
-Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c (TBL1): Use ! rather than `.
- * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
-
-Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
-
- * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
-
- * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
- for mcf5200.
-
- * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
- * aclocal.m4: Rebuild with new libtool.
- * configure: Rebuild.
-
-Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
-
- * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
-
-Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
-
-Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c (v850_opcodes): Further rearrangements.
-
-Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
-
- * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
-
-Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
- parser to work.
-
-Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
-
-Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c: Initialise processors field of v850_opcode structure.
-
-Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
-
- Merge changes from Martin Hunt:
-
- * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
-
- * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
- (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
- rot2h, sra2h, and srl2h to use new SHORT_A5S format.
-
- * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
-
- * d30v-dis.c (print_insn): First operand of d*i (delayed
- branch) instructions is relative.
-
- * d30v-opc.c (d30v_opcode_table): Change form for repeati.
- (d30v_operand_table): Add IMM6S3 type.
- (d30v_format_table): Change SHORT_D2. Add LONG_Db.
-
- * d30v-dis.c: Fix bug with ".s" and ".l" extensions
- and cmp instructions.
-
- * d30v-opc.c: Correct entries for repeat*, and sat*.
- Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
- types. Correct several formats.
-
- * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
-
- * d30v-opc.c (pre_defined_registers): Change control registers.
-
- * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
- SHORT_C2. Manual was incorrect.
-
- * d30v-dis.c (lookup_opcode): Return value now indicates
- if an opcode has a short and a long form. Used for deciding
- to append a ".s" or ".l".
- (print_insn): Append a ".s" to an instruction if it is
- the short form and ".l" if it is a long form. Do not append
- anything if the instruction has only one possible size.
-
- * d30v-opc.c: Change mulx2h to require an even register.
- New form: SHORT_A2; a SHORT_A form that needs an even
- register as the first operand.
-
- * d30v-dis.c (print_insn_d30v): Fix problem where the last
- instruction was not being disassembled if there were an odd
- number of instructions.
-
- * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
-
-Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-dis.c (disassemble): Improved display of register lists.
-
-Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sparc_opcodes): Fix assembler args to
- fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
- fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
- fandnot1s, fandnot2s.
-
-Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
-
-Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * cgen-asm.c (cgen_parse_address): New argument resultp.
- All callers updated.
- * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
-
-Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-dis.c (disassemble): PC relative instructions are
- relative to the next instruction, not the current instruction.
-
-Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-dis.c (disassemble): Only signed extend values that are not
- returned by extract functions.
- Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
-
-Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c: Update comments. Remove use of
- V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
-
-Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c (MOVHI): Immediate parameter is unsigned.
-
-Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
-
- * configure: Rebuilt with latest devo autoconf for NT support.
-
-Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-dis.c (disassemble): Use curly brace syntax for register
- lists.
-
- * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
- where r0 is being used as a destination register.
-
-Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
-
-Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
-
- * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
-
-Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-opc.c (v850_opcodes[]): Remove use of flag field.
- * v850-opc.c (v850_opcodes[]): Add support for reversed short load
- opcodes..
-
-Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
-
- * configure (cgen_files): Add support for v850e target.
- * configure.in (cgen_files): Add support for v850e target.
-
-Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
-
- * configure (cgen_files): Add support for v850ea target.
- * configure.in (cgen_files): Add support for v850ea target.
-
-Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * configure.in (bfd_arc_arch): Add.
- * configure: Rebuild.
- * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
- * Makefile.in: Rebuild.
- * arc-dis.c, arc-opc.c: New files.
- * disassemble.c (ARCH_all): Define ARCH_arc.
- (disassembler): Add ARC support.
-
-Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
-
- * v850-dis.c (disassemble): Add support for v850EA instructions.
-
- * v850-opc.c (insert_i5div, extract_i5div): New Functions.
- (v850_opcodes): Add v850EA instructions.
-
- * v850-dis.c (disassemble): Add support for v850E instructions.
-
- * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
- extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
- insert_spe, extract_spe): New Functions.
- (v850_opcodes): Add v850E instructions.
-
- * v850-opc.c: Reorganised and re-layed out to improve readability
- and portability.
-
-Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * configure: Rebuild with autoconf 2.12.1.
-
-Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * aclocal.m4, configure: Rebuild with new automake patches.
-
-Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
- * acinclude.m4: Just include acinclude.m4 from BFD.
- * aclocal.m4, configure: Rebuild.
-
-Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.am: New file, based on old Makefile.in.
- * acconfig.h: New file.
- * acinclude.m4: New file.
- * stamp-h.in: New file.
- * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
- Removed shared library handling; now handled by libtool. Replace
- AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
- AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
- AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
- handling in AC_OUTPUT.
- * dep-in.sed: Change .o to .lo.
- * Makefile.in: Now built with automake.
- * aclocal.m4: Now built with aclocal.
- * config.in, configure: Rebuild.
-
-Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c: Fix typo/thinko in "eret" instruction.
-
-Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
- Make array const.
- * sparc-dis.c (sorted_opcodes): New static local.
- (struct opcode_hash): `opcode' is pointer to const element.
- (build_hash): First arg is now table of sorted pointers.
- (print_insn_sparc): Sort opcodes by sorting table of pointers.
- (compare_opcodes): Update.
-
-Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * cgen-opc.c: #include <ctype.h>.
- (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
- Handle case insensitive hashing.
- (hash_keyword_value): Change type of `value' to unsigned int.
-
-Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c (mips_builtin_opcodes): If an insn uses single
- precision FP, mark it as such. Likewise for double precision
- FP. Mark ISA1 insns. Consolidate duplicate opcodes where
- possible.
-
-Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
-
- * ppc-opc.c (extract_nsi): make unsigned expression signed before
- negating it.
- (UNUSED): remove one level of parens, so MSVC doesn't choke on
- nesting depth when all the macros are expanded.
-
-Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * sparc-opc.c: The fcmp v9a instructions take an integer register
- as a destination, not a floating point register. From Christian
- Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
-
-Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
- syntax. From Roman Hodek
- <rnhodek@faui22c.informatik.uni-erlangen.de>.
-
- * i386-dis.c (twobyte_has_modrm): Fix pand.
-
-Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
-
- * i386-dis.c (dis386_twobyte): Fix pand and pandn.
-
-Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
-
- * arm-dis.c: Add prototypes for arm_decode_shift and
- print_insn_arm.
-
-Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c: Add r3900 insns.
-
-Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
- print delay slot instructions on the same line. When using a PC
- relative load, add a comment with the value being loaded if it can
- be obtained.
-
-Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
- to pushS/popS for segment regs and byte constant so that
- pushw/popw printed when in 16 bit data mode.
-
- * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
- print cbtw, cwtd in 16 bit data mode.
- * i386-dis.c (putop): extra case W to support above.
-
- * i386-dis.c (print_insn_x86): print addr32 prefix when given
- address size prefix in 16 bit address mode.
-
-Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * sh-dis.c: Reindent. Rename local variable fprintf to
- fprintf_fn.
-
-Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
-
-Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
- field membership.
- * mips16-opc.c (mip16_opcodes): same.
-
-Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
-
- * m68k-opc.c (moveb): Change $d to %d.
-
-Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * i386-dis.c: (dis386_twobyte): Add MMX instructions.
- (twobyte_has_modrm): Likewise.
- (grps): Likewise.
- (OP_MMX, OP_EM, OP_MS): New static functions.
-
- * i386-dis.c: Revert patch of April 4. The output now matches
- what gcc generates.
-
-Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
- of $simm16.
-
-Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
-
-Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (install): Depend upon installdirs.
- (installdirs): New target.
-
-Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
-
- From Thomas Graichen <graichen@rzpd.de>:
- * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
- * configure: Rebuild.
-
-Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
- Delete string{,s}.h support.
-
-Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * cgen-asm.c (cgen_parse_operand_fn): New global.
- (cgen_parse_{{,un}signed_integer,address}): Update call to
- cgen_parse_operand_fn.
- (cgen_init_parse_operand): New function.
- * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
- from cgen_asm_init_parse.
- (m32r_cgen_assemble_insn): New operand `errmsg'.
- Delete call to as_bad, return error message to caller.
- (m32r_cgen_asm_hash_keywords): #if 0 out.
-
-Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
- not data register.
- [case 'J']: Fix typo in register name.
-
-Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Substitute SHLIB_LIBS.
- * configure: Rebuild.
- * Makefile.in (SHLIB_LIBS): New variable.
- ($(SHLIB)): Use $(SHLIB_LIBS).
-
-Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
-
- * cgen-opc.c (hash_keyword_name): Improve algorithm.
-
- * disassemble.c (disassembler): Handle m32r.
-
-Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
- * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
- * Makefile.in (CFILES): Add them.
- (ALL_MACHINES): Add them.
- (dependencies): Regenerate.
- * configure.in (cgen_files): New variable.
- (bfd_m32r_arch): Add entry.
- * configure: Regenerate.
-
-Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Correct file names for bfd_mn10[23]00_arch.
- * configure: Rebuild.
-
- * Makefile.in: Rebuild dependencies.
-
- * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
-
- * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
- fdivp.
-
-Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * Branched binutils 2.8.
-
-Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * m10200-dis.c: Rename from mn10200-dis.c.
- * m10200-opc.c: Rename from mn10200-opc.c.
- * m10300-dis.c: Rename from mn10300-dis.c
- * m10300-opc.c: Rename from mn10300-opc.c.
- * Makefile.in: Update accordingly.
-
- * mips16-opc.c: Add mul and dmul macros.
-
-Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
-
- * makefile.vms: Update CFLAGS, add clean target.
-
-Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c: Add "wait". From Ralf Baechle
- <ralf@gnu.ai.mit.edu>.
-
- * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
- * configure, config.in: Rebuild.
- * sysdep.h: Include <stdlib.h> if it exists.
- * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
- <string.h>.
- * Makefile.in: Rebuild dependencies.
-
-Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
- Andrew Bray <andy@madhouse.demon.co.uk>.
-
- * mips-opc.c: Add cast when setting mips_opcodes.
-
-Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
-
- * v850-dis.c (disassemble): Fix sign extension problem.
- * v850-opc.c (extract_d*): Fix sign extension problems to make
- disassembly calculate branch offsets correctly.
-
-Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
-
- * mips-opc.c: Add dctr and dctw.
-
-Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d30v-dis.c (print_insn): Change the way signed constants
- are displayed.
-
-Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (BFD_H): New variable.
- (HFILES): New variable.
- (CFILES): Add all C files.
- (.dep, .dep1, dep.sed, dep, dep-in): New targets.
- Delete old dependencies, and build new ones.
- * dep-in.sed: New file.
-
-Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
-
- * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
-
-Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-opc.c: Change "trap" to "syscall".
- * mn10300-opc.c: Add new "syscall" instruction.
-
-Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
- mulul insns on the coldfire.
-
-Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * arm-dis.c (print_insn_arm): Don't print instruction bytes.
- (print_insn_big_arm): Set bytes_per_chunk and display_endian.
- (print_insn_little_arm): Likewise.
-
-Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
-
- Based on patches from H.J. Lu <hjl@lucon.org>:
- * i386-dis.c (fetch_data): Add prototype.
- * m68k-dis.c (fetch_data): Add prototype.
- (dummy_print_address): Add prototype. Make static.
- * ppc-opc.c (valid_bo): Add prototype.
- * sparc-dis.c (build_hash_table): Add prototype.
- (is_delayed_branch, compute_arch_mask): Add prototypes.
- (print_insn_sparc): Make several local variables const.
- (compare_opcodes): Change arguments to const PTR. Add prototype.
- * sparc-opc.c (arg): Change name field to be const.
- (lookup_name, lookup_value): Add prototypes. Change table and
- name parameters to be const.
- (sparc_encode_asi): Change name parameter to be const.
- (sparc_encode_membar, sparc_encode_prefetch): Likewise.
- (sparc_encode_sparclet_cpreg): Likewise.
- (sparc_decode_asi): Change return type to be const.
- (sparc_decode_membar, sparc_decode_prefetch): Likewise.
- (sparc_decode_sparclet_cpreg): Likewise.
-
-Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
- Solaris doesn't like the combined options, and the -f is
- unnecessary.
- (stamp-tshlink, install): Likewise.
-
-Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
- as relaxable.
-
-Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
-
-Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
- the mc68000.
-
-Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
-
- * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
-
-Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
-
- * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
-
-Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
-
- * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
-
-Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
- floatformat_to_double to make portable.
- (print_insn_arg): Use NEXTEXTEND macro when extracting extended
- precision float.
-
-Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
-
- * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
- and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
-
-Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
- d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
-
-Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (LSI_SCALED): Renamed from this ...
- (OFF_SL_BR_SCALED): ... to this, and added the flag
- TIC80_OPERAND_BASEREL to the flags word.
- (tic80_opcodes): Replace all occurances of LSI_SCALED with
- OFF_SL_BR_SCALED.
-
-Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
-
- * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
- Change mips_opcodes from const array to a pointer,
- and change bfd_mips_num_opcodes from const int to int,
- so that we can increase the size of the mips opcodes table
- dynamically.
-
-Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_predefined_symbols): Revert change to
- store BITNUM values in the table in one's complement form
- to match behavior when assembler is given a raw numeric
- value for a BITNUM operand.
- * tic80-dis.c (print_operand_bitnum): Ditto.
-
-Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d30v-opc.c: Removed references to FLAG_X.
-
-Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
-
-Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * Makefile.in: Added d30v object files.
- * configure: (bfd_d30v_arch) Rebuilt.
- * configure.in: (bfd_d30v_arch) Added new case.
- * d30v-dis.c: New file.
- * d30v-opc.c: New file.
- * disassemble.c (disassembler) Add entry for d30v.
-
-Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_predefined_symbols): Add symbolic
- representations for the floating point BITNUM values.
-
-Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
- in the table in one's complement form, as they appear in the
- actual instruction.
- (tic80_symbol_to_value): Use macros to access predefined
- symbol fields.
- (tic80_value_to_symbol): Ditto.
- (tic80_next_predefined_symbol): New function.
- * tic80-dis.c (print_operand_bitnum): Remove code that did
- one's complement for BITNUM values.
-
-Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
-
- * makefile.vms: Remove 8 bit characters. Update to latest
- gcc release.
-
-Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
-
- * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
-
-Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
- (IMM24_PCREL): Likewise.
-
-Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
- address for an extended PC relative instruction that is not a
- branch.
-
-Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
- bytes_per_line.
-
-Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
- (tic80_opcodes): Sort entries so that long immediate forms
- come after short immediate forms, making it easier for
- assembler to select the right one for a given operand.
-
-Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
- display_endian.
- (print_insn_mips16): Likewise.
-
-Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_symbol_to_value): Changed to accept
- a symbol class that restricts translation to just that
- class (general register, condition code, etc).
-
-Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
- and REG_DEST_E for register operands that have to be
- an even numbered register. Add REG_FPA for operands that
- are one of the floating point accumulator registers.
- Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
- (tic80_opcodes): Change entries that need even numbered
- register operands to use the new operand table entries.
- Add "or" entries that are identical to "or.tt" entries.
-
-Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * mips16-opc.c: Add new cases of exit instruction for
- disassembler.
- * mips-dis.c (print_mips16_insn_arg): Display floating point
- registers in operands of exit instruction. Print `$' before
- register names in operands of entry and exit instructions.
-
-Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_predefined_symbols): Table of name/value
- pairs for all predefined symbols recognized by the assembler.
- Also used by the disassembling routines.
- (tic80_symbol_to_value): New function.
- (tic80_value_to_symbol): New function.
- * tic80-dis.c (print_operand_control_register,
- print_operand_condition_code, print_operand_bitnum):
- Remove private tables and use tic80_value_to_symbol function.
-
-Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-dis.c (print_operand): Change address printing
- to correctly handle PC wrapping. Fixes PR11490.
-
-Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
- branches relaxable.
-
-Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (print_insn_mips16): Set insn_info information.
- (print_mips16_insn_arg): Likewise.
-
- * mips-dis.c (print_insn_mips16): Better handling of an extend
- opcode followed by an instruction which can not be extended.
-
-Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
- coldfire moveb instruction to not allow an address register as
- destination. Although the documentation does not indicate that
- this is invalid, experiments uncovered unexpected behavior.
- Added a comment explaining the situation. Thanks to Andreas
- Schwab for pointing this out to me.
-
-Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_opcodes): Expand comment to note that the
- entries are presorted so that entries with the same mnemonic are
- adjacent to each other in the table. Sort the entries for each
- instruction so that this is true.
-
-Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-dis.c: Include <libiberty.h>.
- (print_insn_m68k): Sort the opcode table on the most significant
- nibble of the opcode.
-
-Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
- "vsub", "vst", "xnor", and "xor" instructions.
- (V_a1): Renamed from V_a, msb of accumulator reg number.
- (V_a0): Add macro, lsb of accumulator reg number.
-
-Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-dis.c (print_insn_tic80): Broke excessively long
- function up into several smaller ones and arranged for
- the instruction printing function to be callable recursively
- to print vector instructions that have both a load and a
- math instruction packed into a single opcode.
- * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
- to explain why it comes after the other vector opcodes.
-
-Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
- move insns to handle immediate operands.
-
-Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
- fix operand mask in the "moveml" entries for the coldfire.
-
-Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
- New macros for building vector instruction opcodes.
- (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
- FMT_LI, which were unused. The field is now a flags field.
- Remove some opcodes that are possible, but illegal, such
- as long immediate instructions with doubles for immediate
- values. Add "vadd" and "vld" instructions.
-
-Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (tic80_operands): Reorder some table entries to make
- the order more logical. Move the shift alias instructions ("rotl",
- "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
- interspersed with the regular sr.x and sl.x instructions. Add
- and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
- "sub", "subu", "swcr", and "trap".
-
-Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
- (OFF_SL_PC): Renamed from OFF_SL.
- (OFF_SS_BR): New operand type for base relative operand.
- (OFF_SL_BR): New operand type for base relative operand.
- (REG_BASE): New operand type for base register operand.
- (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
- "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
- "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
- instructions.
- * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
- 10 char field, padded with spaces on rhs, rather than a string
- followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
- than old TIC80_OPERAND_RELATIVE. Add support for new
- TIC80_OPERAND_BASEREL flag bit.
-
-Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-dis.c (print_insn_tic80): Print floating point operands
- as floats.
- * tic80-opc.c (SPFI): Add single precision floating point
- immediate operand type.
- (ROTATE): Add rotate operand type for shifts.
- (ENDMASK): Add for shifts.
- (n): Macro for the 'n' bit.
- (i): Macro for the 'i' bit.
- (PD): Macro for the 'PD' field.
- (P2): Macro for the 'P2' field.
- (P1): Macro for the 'P1' field.
- (tic80_opcodes): Add entries for "exts", "extu", "fadd",
- "fcmp", and "fdiv".
-
-Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-dis.c (disassemble): Mask off unwanted bits after
- adding in current address for pc-relative operands.
-
-Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
- (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
- * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
- changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
- (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
- REG_BASE_M_SI, REG_BASE_M_LI respectively.
- (REG_SCALED, LSI_SCALED): New operand types.
- (E): New macro for 'E' bit at bit 27.
- (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
- opcodes, including the various size flavors (b,h,w,d) for
- the direct load and store instructions.
-
-Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
- in an instruction.
- * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
- Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
- * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
- (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
- (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
- masks with "MASK_* & ~M_*" to get the M bit reset.
- (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
-
-Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
-
- * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
- correctly. Add support for printing TIC80_OPERAND_BITNUM and
- TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
- form.
- * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
- CC, SICR, and LICR table entries.
- (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
- "bcnd", and "brcr" opcodes.
-
-Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
-
- * ppc-opc.c (powerpc_operands): Make comment match the
- actual fields (no shift field).
- * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
- * tic80-dis.c (print_insn_tic80): Replace abort stub with a
- partial implementation, work in progress.
- * tic80-opc.c (tic80_operands): Begin construction operands table.
- (tic80_opcodes): Continue populating opcodes table and start
- filling in the operand indices.
- (tic80_num_opcodes): Add this.
-
-Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c: Add #B case for moveq.
-
-Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-dis.c (disassemble): Make sure all variables are initialized
- before they are used.
-
-Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (v850_opcodes): Put curly-braces around operands
- for "breakpoint" instruction.
-
-Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
- (dep): Use ALL_CFLAGS rather than CFLAGS.
-
-Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
- flag.
-
-Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
- (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
-
-Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mips16-opc.c: Add "abs".
-
-Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
- * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
- (disassembler): Add bfd_arch_tic80 support to set disassemble
- to print_insn_tic80.
- * tic80-dis.c (print_insn_tic80): Add stub.
-
-Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
-
- * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
- * configure: Regenerate with autoconf.
- * tic80-dis.c: Add file.
- * tic80-opc.c: Add file.
-
-Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
-
-Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-opc.c (mn10200_operands): Add SIMM16N.
- (mn10200_opcodes): Use it for some logicals and btst insns.
- Add "break" and "trap" instructions.
-
- * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
-
- * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
-
-Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (print_mips16_insn_arg): The base address of a PC
- relative load or add now depends upon whether the instruction is
- in a delay slot.
-
-Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-dis.c: Finish writing disassembler.
- * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
- Fix mask for "jmp (an)".
-
- * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
- handle endianness issues for mn10300.
-
- * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
-
-Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
- instruction. Fix opcode field for "movb (imm24),dn".
-
- * mn10200-opc.c (mn10200_operands): Fix insertion position
- for DI operand.
-
-Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-opc.c: Create mn10200 opcode table.
- * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
- but moving along nicely.
-
-Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
-
-Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Revert change to use < and >
- specifiers for fmovem* instructions.
-
-Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-dis.c (disassemble): Remove '$' register prefixing.
-
-Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
- with dsrl.
-
-Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c: Add some comments explaining the various
- operands and such.
-
- * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
-
-Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * m68k-dis.c (print_insn_arg): Handle new < and > operand
- specifiers.
-
- * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
- operand specifiers in fmovm* instructions.
-
-Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * ppc-opc.c (insert_li): Give an error if the offset has the two
- least significant bits set.
-
-Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (print_insn_mips16): Separate the instruction from
- the arguments with a tab, not a space.
-
-Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-dis.c (disasemble): Finish conversion to '$' as
- register prefix.
-
- * mn10300-opc.c (mn10300_opcodes): Fix mask field for
- mov am,(imm32,sp).
-
-Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure: Rebuild with autoconf 2.12.
-
- Add support for mips16 (16 bit MIPS implementation):
- * mips16-opc.c: New file.
- * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
- (mips16_reg_names): New static array.
- (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
- after seeing a 16 bit symbol.
- (print_insn_little_mips): Likewise.
- (print_insn_mips16): New static function.
- (print_mips16_insn_arg): New static function.
- * mips-opc.c: Add jalx instruction.
- * Makefile.in (mips16-opc.o): New target.
- * configure.in: Use mips16-opc.o for bfd_mips_arch.
- * configure: Rebuild.
-
-Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
- operand specifiers in *save, *restore and movem* instructions.
-
- * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
- the coldfire.
-
- * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
- register operands for immediate arithmetic, not, neg, negx, and
- set according to condition instructions.
-
- * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
- specifier of the effective-address operand in immediate forms of
- arithmetic instructions. The specifier for the immediate operand
- notes how and where the constant will be stored.
-
-Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
- opcode.
-
- * mn10300-dis.c (disassemble): Use '$' instead of '%' for
- register prefix.
-
- * mn10300-dis.c (disassemble): Prefix registers with '%'.
-
-Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-dis.c (disassemble): Handle register lists.
-
- * mn10300-opc.c: Fix handling of register list operand for
- "call", "ret", and "rets" instructions.
-
- * mn10300-dis.c (disassemble): Print PC-relative and memory
- addresses symbolically if possible.
- * mn10300-opc.c: Distinguish between absolute memory addresses,
- pc-relative offsets & random immediates.
-
- * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
- in 7 byte insns.
- (disassemble): Handle SPLIT and EXTENDED operands.
-
-Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-dis.c: Rough cut at printing some operands.
-
- * mn10300-dis.c: Start working on disassembler support.
- * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
-
- * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
- list.
- (mn10300_opcodes): Use REGS for register list in "movm" instructions.
-
-Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
-
-Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_opcodes): Demand parens around
- register argument is calls and jmp instructions.
-
-Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
- getx operand. Fix opcode for mulqu imm,dn.
-
-Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_operands): Hijack "bits" field
- in MN10300_OPERAND_SPLIT operands for how many bits
- appear in the basic insn word. Add IMM32_HIGH24,
- IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
- (mn10300_opcodes): Use new operands as needed.
-
- * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
- for bset, bclr, btst instructions.
- (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
-
- * mn10300-opc.c (mn10300_operands): Remove many redundant
- operands. Update opcode table as appropriate.
- (IMM32): Add MN10300_OPERAND_SPLIT flag.
- (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
-
-Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
- operands (for indexed load/stores). Fix bitpos for DI
- operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
- few instructions that insert immediates/displacements in the
- middle of the instruction. Add IMM8E for 8 bit immediate in
- the extended part of an instruction.
- (mn10300_operands): Use new opcodes as appropriate.
-
-Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-opc.c (d10v_opcodes): Declare the trap instruction
- sequential so the assembler never parallelizes it with
- other instructions.
-
-Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
- a data/address register that appears in register field 0
- and register field 1.
- (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
-
-Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
-
- * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
- standard disassembly.
-
- * alpha-opc.c (alpha_operands): Rearrange flags slot.
- (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
- Recategorize PALcode instructions.
-
-Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (v850_opcodes): Add relaxing "jbr".
-
-Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
- there are no operand types.
-
-Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (D9_RELAX): Renamed from D9, all references
- changed.
- (v850_operands): Make sure D22 immediately follows D9_RELAX.
-
-Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
-
-Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
- and sst.w instructions.
-
- * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
- "bCC"instructions).
-
-Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (_print_insn_mips): Use a tab between the instruction
- and the arguments.
-
-Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * ppc-opc.c (PPCPWR2): Define.
- (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
- it.
-
-Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
- field for movhu instruction.
-
- * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
- cast value to "long" not "signed long" to keep hpux10
- compiler quiet.
-
-Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
- for mov (abs16),DN.
-
- * mn10300-opc.c (FMT*): Remove definitions.
-
- * mn10300-opc.c (mn10300_opcodes): Fix destination register
- for shift-by-register opcodes.
-
- * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
- into [AD][MN][01] for encoding the position of the register
- in the opcode.
-
-Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
- "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
-
-Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
- Fix various typos. Add "PAREN" operand.
- (MEM, MEM2): Define.
- (mn10300_opcodes): Surround all memory addresses with "PAREN"
- operands. Fix several typos.
-
- * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
- changes.
-
-Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-opc.c (FMT_XX): Renumber starting at one.
- (mn10300_operands): Rough cut. Enough to parse "mov" instructions
- at this time.
- (mn10300_opcodes): Break opcode format out into its own field.
- Update many operand fields to deal with signed vs unsigned
- issues. Fix one or two typos in the "mov" instruction
- opcode, mask and/or operand fields.
-
-Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
- m68851 wasn't reset.
-
-Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
- all opcodes. Very rough cut at operands for all opcodes.
-
- * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
- opcode table.
-
-Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10200-opc.c, mn10300-opc.c: New files.
- * mn10200-dis.c, mn10300-dis.c: New files.
- * mn10x00-opc.c, mn10x00-dis.c: Deleted.
- * disassemble.c: Break mn10x00 support into 10200 and 10300
- support.
- * configure.in: Likewise.
- * configure: Rebuilt.
-
-Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
-
- * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
-
-Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
-
- * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
- MN10x00 processors.
- * disassemble (ARCH_mn10x00): Define.
- (disassembler): Handle bfd_arch_mn10x00.
- * configure.in: Recognize bfd_mn10x00_arch.
- * configure: Rebuilt.
-
-Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
- accordingly. Don't declare functions using op_rtn.
-
-Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
- params to be more standard.
- * (disassemble): Print absolute addresses and symbolic names for
- branch and jump targets.
- * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
- bit operands.
- * (v850_opcodes): Add breakpoint insn.
-
-Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c: Move the fmovemx data register cases before the
- other cases, so that they get recognized before the data register
- does gets treated as a degenerate register list.
-
-Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c: Add a case for "div" and "divu" with two registers
- and a destination of $0.
-
-Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
-
- * mips-dis.c (print_insn_arg): Add prototype.
- (_print_insn_mips): Ditto.
-
-Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (print_insn_arg): Print condition code registers as
- $fccN.
-
-Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
-
-Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-dis.c (disassemble): Make static. Provide prototype.
-
-Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (insert_d9, insert_d22): Fix boundary case
- in range checks.
-
-Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-dis.c (disassemble): Handle insertion of ',', '[' and
- ']' characters into the output stream.
- * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
- Add "memop" field to all opcodes (for the disassembler).
- Reorder opcodes so that "nop" comes before "mov" and "jr"
- comes before "jarl".
-
- * v850-dis.c (print_insn_v850): Fix typo in last change.
-
- * v850-dis.c (print_insn_v850): Properly handle disassembling
- a two byte insn at the end of a memory region when the memory
- region's size is only two byte aligned.
-
- * v850-dis.c (v850_cc_names): Fix stupid thinkos.
-
- * v850-dis.c (v850_reg_names): Define.
- (v850_sreg_names, v850_cc_names): Likewise.
- (disassemble): Very rough cut at printing operands (unformatted).
-
- * v850-opc.c (BOP_MASK): Fix.
- (v850_opcodes): Fix mask for jarl and jr.
-
- * v850-dis.c: New file. Skeleton for disassembler support.
- * Makefile.in Remove v850 references, they're not needed here.
- * configure.in: Add v850-dis.o when building v850 toolchains.
- * configure: Rebuilt.
- * disassemble.c (disassembler): Call v850 disassembler.
-
- * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
- (insert_d8_6, extract_d8_6): New functions.
- (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
- Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
- Add D8_6.
- (IF4A, IF4B): Use "D7" instead of "D7S".
- (IF4C, IF4D): Use "D8_7" instead of "D8".
- (IF4E, IF4F): New. Use "D8_6".
- (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
- sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
-
- * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
- (v850_operands): Change D16 to D16_15, use special insert/extract
- routines. New new D16 that uses the generic insert/extract code.
- (IF7A, IF7B): Use D16_15.
- (IF7C, IF7D): New. Use D16.
- (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
-
- * v850-opc.c (insert_d9, insert_d22): Slightly improve error
- message. Issue an error if the branch offset is odd.
-
- * v850-opc.c: Add notes about needing special insert/extract
- for all the load/store insns, except "ld.b" and "st.b".
-
- * v850-opc.c (insert_d22, extract_d22): New functions.
- (v850_operands): Use insert_d22 and extract_d22 for
- D22 operands.
- (insert_d9): Fix range check.
-
-Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
-
- * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
- and set bits field to D9 and D22 operands.
-
-Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (v850_operands): Define SR2 operand.
- (v850_opcodes): "ldsr" uses R1,SR2.
-
- * v850-opc.c (v850_opcodes): Fix opcode specs for
- sld.w, sst.b, sst.h, sst.w, and nop.
-
-Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (v850_opcodes): Add null opcode to mark the
- end of the opcode table.
-
-Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-opc.c (pre_defined_registers): Added register pairs,
- "r0-r1", "r2-r3", etc.
-
-Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (v850_operands): Make I16 be a signed operand.
- Create I16U for an unsigned 16bit mmediate operand.
- (v850_opcodes): Use I16U for "ori", "andi" and "xori".
-
- * v850-opc.c (v850_operands): Define EP operand.
- (IF4A, IF4B, IF4C, IF4D): Use EP.
-
- * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
- with immediate operand, "movhi". Tweak "ldsr".
-
- * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
- correct. Get sld.[bhw] and sst.[bhw] closer.
-
- * v850-opc.c (v850_operands): "not" is a two byte insn
-
- * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
-
- * v850-opc.c (v850_operands): D16 inserts at offset 16!
-
- * v850-opc.c (two): Get order of words correct.
-
- * v850-opc.c (v850_operands): I16 inserts at offset 16!
-
- * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
- register source and destination operands.
- (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
-
- * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
- same thinko in "trap" opcode.
-
- * v850-opc.c (v850_opcodes): Add initializer for size field
- on all opcodes.
-
- * v850-opc.c (v850_operands): D6 -> DS7. References changed.
- Add D8 for 8-bit unsigned field in short load/store insns.
- (IF4A, IF4D): These both need two registers.
- (IF4C, IF4D): Define. Use 8-bit unsigned field.
- (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
- IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
- for "ldsr" and "stsr".
- * v850-opc.c (v850_operands): 3-bit immediate for bit insns
- is unsigned.
-
- * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
- short store word (sst.w).
-
-Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * v850-opc.c (v850_operands): Added insert and extract fields,
- pointers to functions that handle unusual operand encodings.
-
-Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (v850_opcodes): Enable "trap".
-
- * v850-opc.c (v850_opcodes): Fix order of displacement
- and register for "set1", "clr1", "not1", and "tst1".
-
-Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
-
- * v850-opc.c (v850_operands): Add "B3" support.
- (v850_opcodes): Fix and enable "set1", "clr1", "not1"
- and "tst1".
-
- * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
-
- * v850-opc.c: Close unterminated comment.
-
-Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
-
- * v850-opc.c (v850_operands): Add flags field.
- (v850_opcodes): add move opcodes.
-
-Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
-
- * Makefile.in (ALL_MACHINES): Add v850-opc.o.
- * configure: (bfd_v850v_arch) Add new case.
- * configure.in: (bfd_v850_arch) Add new case.
- * v850-opc.c: New file.
-
-Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
-
-Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-opc.c: Add additional information to the opcode
- table to help determinine which instructions can be done
- in parallel.
-
-Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.sed: Update editing of include pathnames to be
- more general.
-
-Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * arm-opc.h: Added "bx" instruction definition.
-
-Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
-
- * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
-
-Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
-
-Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
-
-Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
-
- * makefile.vms: Update for alpha-opc changes.
-
-Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * i386-dis.c (print_insn_i386): Actually return the correct value.
- (ONE, OP_ONE): #ifdef out; not used.
-
-Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
- Changed subi operand type to treat 0 as 16.
-
-Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
- <rose@netcom.com>.
-
-Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
-
- * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
- memory transfer instructions. Add new format string entries %h and %s.
- * arm-dis.c: (print_insn_arm): Provide decoding of the new
- formats %h and %s.
-
-Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
- (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
-
-Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * alpha-dis.c (print_insn_alpha_osf): Remove.
- (print_insn_alpha_vms): Remove.
- (print_insn_alpha): Make globally visible. Chose the register
- names based on info->flavour.
- * disassemble.c: Always return print_insn_alpha for the alpha.
-
-Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-dis.c (dis_long): Handle unknown opcodes.
-
-Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-opc.c: Changes to support signed and unsigned numbers.
- All instructions with the same name that have long and short forms
- now end in ".l" or ".s". Divs added.
- * d10v-dis.c: Changes to support signed and unsigned numbers.
-
-Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * d10v-dis.c: Change all functions to use info->print_address_func.
-
-Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
- move ccr/sr insns more strict so that the disassembler only
- selects them when the addressing mode is data register.
-
-Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
- * d10v-opc.c (pre_defined_registers): Declare.
- * d10v-dis.c (print_operand): Now uses pre_defined_registers
- to pick a better name for the registers.
-
-Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
- operands for fexpand and fpmerge. From Christian Kuehnke
- <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
-
-Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
-
- * alpha-dis.c (print_insn_alpha): No longer the user-visible
- print routine. Take new regnames and cpumask arguments.
- Kill the environment variable nonsense.
- (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
- (print_insn_alpha_vms): New function. Do VMS style regnames.
- * disassemble.c (disassembler): Test bfd flavour to pick
- between OSF and VMS routines. Default to OSF.
-
-Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Call AC_SUBST (INSTALL_SHLIB).
- * configure: Rebuild.
- * Makefile.in (install): Use @INSTALL_SHLIB@.
-
-Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
-
- * configure: (bfd_d10v_arch) Add new case.
- * configure.in: (bfd_d10v_arch) Add new case.
- * d10v-dis.c: New file.
- * d10v-opc.c: New file.
- * disassemble.c (disassembler) Add entry for d10v.
-
-Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
- to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
-
-Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
- distinguish between variants of the instruction set.
- * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
- distinguish between variants of the instruction set.
-
-Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * i386-dis.c (print_insn_i8086): New routine to disassemble using
- the 8086 instruction set.
- * i386-dis.c: General cleanups. Make most things static. Add
- prototypes. Get rid of static variables aflags and dflags. Pass
- them as args (to almost everything).
-
-Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
-
- * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
-
- * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
-
- * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
- if the next arg is marked with SRC_IN_DST. Gross.
-
- * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
- we're looking for and find EXR.
-
- * h8300-dis.c (bfd_h8_disassemble): We don't have a match
- if we're looking for KBIT and we don't find it.
-
- * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
- for L_3 and L_2.
-
- * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
- 3bit immediate operands.
-
-Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * Released binutils 2.7.
-
- * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
- <kkaempf@progis.ac-net.de>.
-
-Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * alpha-opc.c: Correct second case of "mov" to use OPRL.
-
-Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
-
- * sparc-dis.c (print_insn_sparclite): New routine to print
- sparclite instructions.
-
-Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Add coldfire support.
-
-Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
- #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
- to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
-
-Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
-
- * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
- Use autoconf-set values.
- (docdir, oldincludedir): Removed.
- * configure.in (AC_PREREQ): autoconf 2.5 or higher.
-
-Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
-
- * alpha-opc.c: New file.
- * alpha-opc.h: Remove.
- * alpha-dis.c: Complete rewrite to use new opcode table.
- * configure.in: For bfd_alpha_arch, use alpha-opc.o.
- * configure: Rebuild with autoconf 2.10.
- * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
- (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
- alpha-opc.h.
- (alpha-opc.o): New target.
-
-Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
- Set imm_added_to_rs1 even if the source and destination register
- are not the same.
-
- * sparc-opc.c: Add some two operand forms of the wr instruction.
-
-Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
- to just "mode".
-
- * disassemble.c (disassembler): Handle H8/S.
- * h8300-dis.c (print_insn_h8300s): New function for H8/S.
-
-Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * sparc-opc.c: Add beq/teq as aliases for be/te.
-
- * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
- <sergei@msil.sps.mot.com>.
-
-Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
-
- * makefile.vms: New file.
-
- * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
-
-Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
- regardless of plen.
-
-Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * i386-dis.c (OP_OFF): Call append_prefix.
-
-Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppc-opc.c (instruction encoding macros): Add explicit casts to
- unsigned long to silence a warning from the Solaris PowerPC
- compiler.
-
-Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
-
-Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
-
- * sparc-dis.c (X_IMM,X_SIMM): New macros.
- (X_IMM13): Delete.
- (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
- * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
- Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
- cpush, cpusha, cpull sparclet insns.
-
-Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
-
-Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * sparc-opc.c: Set F_FBR on floating point branch instructions.
- Set F_FLOAT on other floating point instructions.
-
-Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
- registers.
- (powerpc_opcodes): Add 860/821 specific SPRs.
-
-Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Permit --enable-shared to specify a list of
- directories. Set and substitute BFD_PICLIST.
- * configure: Rebuild.
- * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
- uses. Set to @BFD_PICLIST@.
-
-Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
-
- * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
- not "abs", which may be needed for the absolute in something
- like btst #0,@10:8. Print L_3 immediates separately from other
- immediates. Change ABSMOV reference to ABS8MEM.
-
-Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
- (current_arch_mask): New static global.
- (compute_arch_mask): New static function.
- (print_insn_sparc): Delete sparc_v9_p. New static local
- current_mach. Resort opcode table if current_mach changes.
- Generalize "insn not supported" test.
- (compare_opcodes): Prefer supported opcodes to nonsupported ones.
- Delete test for v9/!v9.
- * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
- (v6notlet): Define.
- (brfc): Split into CBR and FBR for coprocessor/fp branches.
- (brfcx): Renamed to FBRX.
- (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
- coprocessor mnemonics are not supported on the sparclet).
- (condf): Renamed to CONDF.
- (SLCBCC2): Delete F_ALIAS flag.
-
-Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sparc_opcodes): rd must be 0 for
- mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
-
-Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (config.status): Depend upon BFD VERSION file, so
- that the shared library version number is set correctly.
-
-Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
- Miles Bader <miles@gnu.ai.mit.edu>.
- * configure: Rebuild.
-
-Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
-
- * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
- malloc.
-
-Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure: Rebuild with autoconf 2.8.
-
-Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
- * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
-
-Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Don't set SHLIB or SHLINK to an empty string,
- since they appear as targets in Makefile.in.
- * configure: Rebuild.
-
-Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.sed: Edit out shared library support bits.
-
-Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
- (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
- (sparc_opcodes): Add sparclet insns.
- (sparclet_cpreg_table): New static local.
- (sparc_{encode,decode}_sparclet_cpreg): New functions.
- * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
-
-Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
-
- * i386-dis.c (index16): New static variable.
- (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
- other way around.
- (OP_indirE): Return result of OP_E.
- (OP_E): Check for 16 bit addressing mode, and disassemble
- correctly. Optimised 32 bit case a little. Don't print
- "(base,index,scale)" when sib specifies only an offset.
-
-Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Set and substitute SHLIB_DEP.
- * configure: Rebuild.
- * Makefile.in (SHLIB_DEP): New variable.
- (LIBIBERTY_LISTS, BFD_LIST): New variables.
- (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
- COMMON_SHLIB, add them to piclist with appropriate modifications.
- ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
- here: just use piclist.
-
-Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
- (print_insn_sparc): Rewrite v9/not-v9 tests.
- (compare_opcodes): Likewise.
- * sparc-opc.c (MASK_<ARCH>): Define.
- (v6,v7,v8,sparclite,v9,v9a): Redefine.
- (sparclet,v6notv9): Define.
- (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
- (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
-
-Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Call AC_PROG_CC before configure.host.
- * configure: Rebuild.
-
- * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
-
-Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
-
- * i386-dis.c (onebyte_has_modrm): New static array.
- (twobyte_has_modrm): New static array.
- (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
-
-Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
- $(SHLINK).
-
-Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppc-opc.c (PPC): Undef, so default defination on Windows NT
- doesn't conflict.
-
-Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
- m68010up, not just m68020up | cpu32.
-
- * Makefile.in (SONAME): New variable.
- ($(SHLINK)): Make a link to the transformed name, as well.
- (stamp-tshlink): New target.
- (install): Skip stamp-tshlink during install.
-
-Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Call AC_ARG_PROGRAM.
- * configure: Rebuild.
- * Makefile.in (program_transform_name): New variable.
- (install): Transform library name before installing it.
-
-Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * i960-dis.c (mem): Add HX dcinva instruction.
-
- Support for building as a shared library, based on patches from
- Alan Modra <alan@spri.levels.unisa.edu.au>:
- * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
- New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
- SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
- * configure: Rebuild.
- * Makefile.in (ALLLIBS): New variable.
- (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
- (COMMON_SHLIB, SHLINK): New variables.
- (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
- (STAGESTUFF): Remove variable.
- (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
- (stamp-piclist, piclist): New targets.
- ($(SHLIB), $(SHLINK)): New targets.
- ($(OFILES)): Depend upon stamp-picdir.
- (disassemble.o): Build twice if PICFLAG is set.
- (MOSTLYCLEAN): Add pic/*.o.
- (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
- (distclean): Remove pic and stamp-picdir.
- (install): Install shared libraries.
- (stamp-picdir): New target.
-
-Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
- Print unknown instruction as "unknown", rather than in hex.
-
-Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
-
-Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
-
-Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
- when necessary. From Ulrich Drepper
- <drepper@myware.rz.uni-karlsruhe.de>.
-
-Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
- sparc_num_opcodes. Update architecture enum values.
- * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
- (sparc_opcode_lookup_arch): New function.
- (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
- (sparc_opcodes): Add v9a shutdown insn.
-
-Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
-
- * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
- If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
- architecture.
- (print_insn_sparc64): Deleted.
- * disassemble.c (disassembler, case bfd_arch_sparc): Always use
- print_insn_sparc.
-
- * sparc-opc.c (architecture_pname): Add v9a.
-
-Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
-
- * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
- incorrectly defined as 0x16 when it should be 0x15.
- (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
- (alpha_insn_set): added cvtst and cvttq float ops. Also added
- excb (exception barrier) which is defined in the Alpha
- Architecture Handbook version 2.
- * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
- OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
- disassembled as or, for example.
-
-Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
- (_print_insn_mips): Change i from int to unsigned int.
-
-Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
-
- * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
- from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
-
-Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
-
- * i386-dis.c: Added Pentium Pro instructions.
-
-Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
- being for Power2.
-
-Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * sh-opc.h (sh_nibble_type): Added REG_B.
- (sh_arg_type): Added A_REG_B.
- (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
- and stc.l opcodes.
- * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
-
-Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * disassemble.c (disassembler): Use new bfd_big_endian macro.
-
-Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (distclean): Remove stamp-h. From Ronald
- F. Guilmette <rfg@monkeys.com>.
-
-Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- From David Mosberger-Tang <davidm@azstarnet.com>:
- * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
- instruction.
-
-Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
- (sh_table): Added many SH3 opcodes.
- * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
-
-Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
- (subco,subco.): Mark this PPC, not PPCCOM.
-
-Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * configure: Rebuild with autoconf 2.7.
-
-Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * configure: Rebuild with autoconf 2.6.
-
-Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
-
- * configure.in: Sort list of architectures. Accept but do nothing
- for alliant, convex, pyramid, romp, and tahoe.
-
-Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * a29k-dis.c (print_special): Change num to unsigned int.
-
-Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
-
- * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
- shifting it.
-
-Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Call AC_CHECK_PROG to find and cache AR.
- * configure: Rebuilt.
-
-Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
-
- * configure.in: Add case for bfd_i860_arch.
- * configure: Rebuild.
-
-Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
- * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
- (NEXTDOUBLE): Likewise.
- (print_insn_m68k): Don't match fmoveml if there is more than one
- register in the list.
- (print_insn_arg): Handle a place of '8' for a type of 'L'.
-
-Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c: Use #W rather than #w.
- * m68k-dis.c (print_insn_arg): Handle new 'W' place.
-
-Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
- and likewise for all the dbxx opcodes.
-
-Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
-
- * arc-dis.c: Include elf-bfd.h rather than libelf.h.
-
-Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
-
- * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
- the VR4100 specific instructions to the mips_opcodes structure.
-
-Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-config.in, mpw-make.sed: Remove ugly workaround for
- ugly Metrowerks bug in CW6, is fixed in CW7.
-
-Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppc-opc.c (whole file): Add flags for common/any support.
-
-Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (BISON): Remove macro.
- (FLAGS_TO_PASS): Remove BISON.
-
-Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
-
- Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * m68k-dis.c (print_insn_m68k): Recognize all two-word
- instructions that take no args by looking at the match mask.
- (print_insn_arg): Always print "%" before register names.
- [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
- [case '_']: Don't print "@#" before address.
- [case 'J']: Use "%s" as format string, not register name.
- [case 'B']: Treat place == 'C' like 'l' and 'L'.
-
-Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
-
- * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
- name correctly.
-
-Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
-
- From David Mosberger-Tang <davidm@azstarnet.com>
-
- * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
- (alpha_insn_set): added definitions for VAX floating point
- instructions (Unix compilers don't generate these, but handcoded
- assembly might still use them).
-
- * alpha-dis.c (print_insn_alpha): added support for disassembling
- the miscellaneous instructions in the Alpha instruction set.
-
-Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
- no longer create sysdep.h, sed ppc-opc.c to work around a
- serious Metrowerks C bug.
- * mpw-make.in: Remove.
- * mpw-make.sed: New file, used by mpw-configure to edit
- Makefile.in into an MPW makefile.
-
-Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (maintainer-clean): New synonym for realclean.
-
-Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c: Split pmove patterns which use 'P' into patterns
- which use '0', '1', and '2' instead. Specify the proper size for
- a pmove immediate operand. Correct the pmovefd patterns to be
- moves to a register, not from a register.
- * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
-
-Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sparc_opcodes): Mark all insns that reference
- %psr, %wim, %tbr as F_NOTV9.
-
-Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (Makefile): Just rebuild Makefile when running
- config.status.
- (config.h, stamp-h): New targets.
- * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
- earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
- rebuilding config.h.
- * configure: Rebuild.
-
- * mips-opc.c: Change unaligned loads and stores with "t,A"
- operands to use "t,A(b)".
-
-Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * sh-dis.c (print_insn_shx): Add F_FR0 support.
-
-Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
- until 3 instead of until 2.
-
-Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (ALL_CFLAGS): Define.
- (.c.o, disassemble.o): Use $(ALL_CFLAGS).
- (MOSTLYCLEAN): Add config.log.
- (distclean): Don't remove config.log.
- * configure.in: Substitute HDEFINES.
- * configure: Rebuild.
-
-Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * sh-opc.h (sh_arg_type): Add F_FR0.
- (sh_table, case fmac): Add F_FR0 as first argument.
-
-Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
-
-Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-dis.c: Remove all references to NO_V9.
-
-Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * aclocal.m4: Just include ../bfd/aclocal.m4.
- * configure: Rebuild.
-
-Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-dis.c (X_DISP19): Define.
- (print_insn, case 'G'): Use it.
- (print_insn, case 'L'): Sign extend displacement.
-
-Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
- Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
- host_makefile_frag or frags.
- * aclocal.m4: New file.
- * configure: Rebuild.
- * Makefile.in (INSTALL): Set to @INSTALL@.
- (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
- (INSTALL_DATA): Set to @INSTALL_DATA@.
- (AR): Set to @AR@.
- (AR_FLAGS): Set to rc rather than qc.
- (CC): Define as @CC@.
- (CFLAGS): Set to @CFLAGS@.
- (@host_makefile_frag@): Remove.
- (config.status): Remove dependency upon @frags@.
-
- * configure.in: ../bfd/config.bfd now just sets shell variables.
- Use them rather than looking through target Makefile fragments.
- * configure: Rebuild.
-
-Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
-
-Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
- Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
- sparc64 insns.
-
- * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
- (lookup_{name,value}): New functions.
- (prefetch_table): New static local.
- (sparc_{encode,decode}_prefetch): New functions.
- * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
-
-Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * sh-opc.h: Add blank lines to improve readabililty of sh3e
- instructions.
-
-Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * sh-dis.c: Correct comment on first line of file.
-
-Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * disassemble.c (disassembler): Handle bfd_mach_sparc64.
-
- * sparc-opc.c (asi, membar): New static locals.
- (sparc_{encode,decode}_{asi,membar}): New functions.
- (sparc_opcodes, membar insn): Fix.
- * sparc-dis.c (print_insn): Call sparc_decode_asi.
- Support decoding of membar masks.
- (X_MEMBAR): Define.
-
-Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
-
-Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
- and likewise for the other branches. Add bhs as an alias for bcc,
- and likewise for the size variants. Add dbhs as an alias for
- dbcc.
-
-Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * sh-opc.h (FP sts instructions): Update to match reality.
-
-Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-dis.c: (fpcr_names): Add % before all register names.
- (reg_names): Likewise.
- (print_insn_arg): Don't explicitly print % before register names.
- Add % before register names in static array names. In case 'r',
- print data registers as `@(Dn)', not `Dn@'. When printing a
- memory address, don't print @# before it.
- (print_indexed): Change base_disp and outer_disp from int to
- bfd_vma. Print using MIT syntax, not mutant invalid Motorola
- syntax. Sign extend 8 byte displacement correctly.
- (print_base): Print using MIT syntax. Print zpc when appropriate.
- Change parameter disp from int to bfd_vma.
-
- * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
- for jsr.
-
-Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
- F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
- * sh-opc.h (sh_arg_type): Add new operand types.
- (sh_table): Add new opcodes from SH3E Floating Point ISA.
-
-Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (distclean): Remove generated file config.h.
-
-Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (distclean): Remove generated file config.h.
-
-Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
- Clean up tables.
- * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
- (opcode): Remove.
- (print_insn_m68k): Change d to be const. Use m68k_numopcodes
- rather than numopcodes. Use m68k_opcodes rather than removed
- opcode function. Don't check F_ALIAS.
- (print_insn_arg): Change first parameter to be const char *.
- * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
- (m68k-opc.o): New target.
- * configure.in: Build m68k-opc.o for bfd_m68k_arch.
- * configure: Rebuild.
-
-Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
- (opcode_bits, opcode_hash_table): New variables.
- (opcodes_initialized): Renamed from opcodes_sorted.
- (build_hash_table): New function.
- (is_delayed_branch): Use hash table.
- (print_insn): Renamed from print_insn_sparc, made static.
- Build and use hash table. If !sparc64, ignore sparc64 insns,
- and vice-versa if sparc64.
- (print_insn_sparc, print_insn_sparc64): New functions.
- (compare_opcodes): Move sparc64 opcodes to end.
- Print commutative insns with constant second.
- * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
-
-Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
- print_address_func for A_BDISP12 and A_BDISP8. Correct test which
- avoids printing a delay slot in a delay slot.
- * sh-opc.h (sh_table): Fully bracket last entry.
-
-Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
-
-Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
-
- * configure.in: Get host_makefile_frag from ${srcdir}.
-
- * configure.in: Autoconfiscated. Check for string[s].h. Create
- config.h from config.in. Don't set up sysdep.h link.
- * sysdep.h: New file.
- * configure, config.in: New files, generated from configure.in.
- * Makefile.in: Updated to be processed autoconf-style.
- (distclean): Keep sysdep.h. Remove config.log and config.cache.
- (Makefile): Depend on config.status.
- (config.status): New rule.
- * configure.bat: Update Makefile substitutions.
-
-Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
-
- * mips-opc.c (L1): Define.
- (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
- addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
- and wb.
-
-Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
- if ISA 3 and addu otherwise, replacing or, since some MIPS chips
- have multiple add units but only a single logical unit.
-
- * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
- shifted by 18, without any insertion or extraction function.
- (insert_cr, extract_cr): Remove.
-
-Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
- register names.
-
-Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-config.in: Add sh and i386 configs, remove sparc config.
- * sh-opc.h: Add copyright.
-
-Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
-
- * Makefile.in (crunch-m68k): Delete extra target accidentally
- checked in a while ago.
-
-Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * sh-opc.h (sh_table): Add SH3 support.
-
-Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
-
- * sh-opc.h: Added bsrf and braf.
-
-Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
-
- * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
- bogus [ls]fm{ea,fd} patterns.
-
- * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
- * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
- initialize it from memory. Make function static.
- (print_insn_{big,little}_arm): New functions.
- * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
- the correct endianness.
-
-Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
-
- * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
- enum list.
-
-Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
- 17th, so that it builds again using GCC as the compiler.
-
-Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * mips-dis.c (print_insn_little_mips): Cast return value from
- bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
- expects an unsigned long, and that might be fewer words of
- argument storage (e.g., if bfd_vma is long long on a 32-bit
- machine).
- (print_insn_big_mips): Likewise with bfd_getb32 value.
- (_print_insn_mips): Now static.
-
-Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
-
- * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
- gcc memory hog problem with initializer is fixed.
-
-Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- Merge in support for Mac MPW as a host.
- (Old change descriptions retained for informational value.)
-
- * mpw-config.in (archname): Compute from the config.
- (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
-
- * mpw-config.in (target_arch): Compute from canonical target.
- (m68k, mips, powerpc, sparc): Add architectures.
- * mpw-make.in (disassemble.c.o): Add.
- (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
-
- * mpw-config.in (BFD_MACHINES): Set to a default value.
- * mpw-make.in (BFD_MACHINES): Remove wired-in value.
-
- * mpw-make.in (CSEARCH): Add extra-include to search path.
-
- * mpw-config.in (varargs.h): Don't create.
- (sysdep.h): Create using forward-include.
- * mpw-make.in (CSEARCH): Add include/mpw to search path.
-
- * mpw-config.in: New file, MPW version of configure.in.
- * mpw-make.in: New file, MPW version of Makefile.in.
-
-Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * alpha-dis.c (print_insn_alpha): Put empty statement after
- default label.
-
-Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
- (low_sign_extend): Likewise.
- (get_field): Delete unused function.
- (set_field, deposit_14, deposit_21): Likewise.
-
-Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * i386-dis.c: Support for more pentium opcodes. From Guy Harris
- (guy@netapp.com).
-
-Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
-
- Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
-
- * alpha-opc.h (OSF_ASMCODE): define
- print pal-code names as defined in App C of the
- Alpha Architecture Reference Manual
-
- * alpha-dis.c: cleaned up output
- print stylized code forms as defined in App A.4.3 of the
- Alpha Architecture Reference Manual
-
-Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
- `rfe'.
- * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
- 'N', and 'M'.
-
-Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * m68k-dis.c (opcode): New function. Returns address of opcode
- table entry given index, even if the opcode table was split to
- work around gcc bugs.
- (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
- directly.
- (BREAK_UP_BIG_DECL): Make secondary array static and const.
- (reg_names): Now const.
- (print_insn_arg): Arrays cacheFieldName and names now const.
- (print_indexed): Array scales now const.
-
-Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * ppc-opc.c: Sort recently added instructions by minor opcode
- number within major opcode number.
-
-Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * hppa-dis.c: Include libhppa.h.
-
-Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c: Change dli to use M_DLI, and add dla.
-
-Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * Makefile.in (ALL_MACHINES): Add w65-dis.o.
-
-Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c: Add r4650 mul instruction.
-
-Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c: Add uld and usd macros for unaligned double load and
- store.
-
-Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
- mfdcr, mtdcr, icbt, iccci.
-
-Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * i960-dis.c (struct tabent, struct sparse_tabent): Change the
- signed char fields to shorts, more portable.
-
-Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
- char fields as signed chars, since they may have negative values.
-
-Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
- (mycroft@netbsd.org).
-
-Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
-
- From "Logg, Ed" <elogg@ea.com>:
- * ppc-opc.c (extract_bdm): Correct parenthezisation.
- * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
- value.
-
-Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * ppc-opc.c: Changes based on patch from David Edelsohn
- <edelsohn@mhpcc.edu>.
- (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
- SPR.
- (FXM_MASK): Define.
- (insert_tbr): New static function.
- (extract_tbr): New static function.
- (XFXFXM_MASK, XFXM): Define.
- (XSPRBAT_MASK, XSPRG_MASK): Define.
- (powerpc_opcodes): Add instructions to access special registers by
- name. Add mtcr and mftbu.
-
-Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * mips-opc.c (P3): Define.
- (mips_opcodes): Add mad and madu.
-
-Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
-
- * configure.in: Add W65 support.
- * disassemble.c: Likewise.
- * w65-opc.h, w65-dis.c: New files.
-
-Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
-
- * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
- immediates.
-
-Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * mips-opc.c: Add dli as a synonym for li.
-
-Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
- print something for reserved opcode values, even if it won't
- assemble again.
-
- * mips-dis.c (_print_insn_mips): When initializing, shift right
- and mask, to avoid sign extension problems on the Alpha.
-
- * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
- control registers.
-
-Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
-
- * sh-opc.h (mov.l gbr): Get direction right.
- * sh-dis.c (print_insn_shx): New function.
- (print_insn_shl, print_insn_sh): Call print_insn_shx to
- print opcodes with right byte order.
-
-Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
- to avoid conflicts with getopt.
-
-Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * hppa-dis.c (print_insn_hppa): Read the instruction using
- bfd_getb32, so that it works on a little endian or 64 bit host.
- Remove unused local variable op.
-
-Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * mips-opc.c: Use or instead of addu for pseudo-op move, since
- addu does not work correctly if -mips3.
-
-Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * a29k-dis.c (print_special): Add special register names defined
- on 29030, 29040 and 29050.
- (print_insn): Handle new operand type 'I'.
-
-Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * Makefile.in (INSTALL): Use top level install.sh script.
-
-Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
- that it works on a little endian host.
-
-Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * configure.in: Use ${config_shell} when running config.bfd.
-
-Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
-
-Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * a29k-dis.c (print_insn): Print the opcode.
-
-Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
-
-Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
-
- * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
-
-Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
- which store a value into memory.
-
-Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
-
- * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
- * arm-dis.c, arm-opc.h: New files.
-
-Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
-
- * Makefile.in (ns32k-dis.o): Add dependency.
- * ns32k-dis.c (print_insn_arg): Declare initialized local as
- string, not as array of chars.
-
-Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
-
- * sparc-opc.c: Added sparclite extended FP operations, and
- versions of v9 impdep* instructions permitting specification of
- the OPF field.
-
-Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * i960-dis.c (reg_names): Now const.
- (struct sparse_tabent): New type, copied from array type in mem
- function.
- (ctrl): Local static array ctrl_tab now const.
- (cobr): Local static array cobr_tab now const.
- (mem): Local variables reg1, reg2, reg3 now point to const. Local
- static variable mem_tab no longer explicitly initialized. Changed
- mem_init to const array of struct sparse_tabent.
- (reg): Local static variable reg_tab no longer explicitly
- initialized. Changed reg_init to const array of struct
- sparse_tabent.
- (ea): Local static array scale_tab now const.
-
- * i960-dis.c (reg): Added i960JX instructions to reg_init table.
- (REG_MAX): Updated.
-
-Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
-
- * configure.bat: the disassember needs to be enabled for
- "objdump -d" to work in djgpp.
-
-Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * ns32k-dis.c: Deleted all code in "#ifdef GDB".
- (invalid_float): Enabled general version, doesn't require running
- on ns32k host. Changed to take char* argument, and test for
- explicitly specified sizes, instead of using sizeof() on host CPU
- types.
- (INVALID_FLOAT): Cast first argument.
- (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
- list_P032, list_M032): Now const.
- (optlist, list_search): Made appropriate arguments now point to
- const.
- (print_insn_arg): Changed static array of one-character-string
- pointers into a static const array of characters; fixed sprintf
- statement accordingly.
-
-Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
-
- * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
- from distribution. A ns32k-dis.c from a previous distribution has
- been brought up to date and supports the new interface.
-
- * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
-
- * configure.in: add bfd_ns32k_arch target support.
-
- * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
- Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
-
-Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
-
- * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
- disassembly right.
-
-Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
-
- * h8300-dis.c, mips-dis.c: Don't use true and false.
-
-Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
-
- * configure.in: Change --with-targets to --enable-targets.
-
-Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * mips-dis.c (_print_insn_mips): Build a static hash table mapping
- opcodes to the first instruction with that opcode, to speed
- disassembly of large files. From ralphc@pyramid.com (Ralph
- Campbell).
-
-Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * Makefile.in (mostlyclean): Fix typo (was mostyclean).
-
-Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
-
- * configure.bat: update to latest makefile.in
-
-Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
-
- * a29k-dis.c (print_insn): Print 'x' type operand in hex.
- * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
- * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
- slot insn is in a delay slot.
- * z8k-opc.h: (resflg): Fix patterns.
- * h8500-opc.h Fix CR insn patterns.
-
-Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
- "cmpl" before POWER versions, so that gas -many uses them.
-
-Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * disassemble.c: New file.
- * Makefile.in (OFILES): Add disassemble.o.
- (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
- * configure.in: Define ARCHDEFS in Makefile. Code taken from
- binutils/configure.in.
-
- * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
- opcode being examined.
-
-Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
- (insert_ral, insert_ram, insert_ras): New functions.
- (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
- RAS for store with update.
-
-Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
- (edelsohn@npac.syr.edu).
-
-Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
- immediate argument.
-
-Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
-
- * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
-
-Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * ppc-opc.c (powerpc_operands): The signedp field has been
- removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
- instead. Add new operand SISIGNOPT.
- (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
- Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
- * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
- than signedp field.
-
-Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * i386-dis.c (struct private): Renamed to dis_private. `private'
- is a reserved word for dynix cc.
-
-Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * configure.in: Change error message to refer to bfd/config.bfd
- rather than bfd/configure.in.
-
-Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
-
- * ppc-opc.c: Define POWER2 as short alias flag.
- (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
- fsqrt.
-
-Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * i960-dis.c (print_insn_i960): Don't read a second word for
- opcodes 0, 1, 2 and 3.
-
-Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
-
-Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * m68881-ext.c: Removed; no longer used.
- * Makefile.in: Changed accordingly.
-
- * m68k-dis.c (ext_format_68881): Don't declare.
- (print_insn_m68k): If an instruction uses place 'i', it uses at
- least four fixed bytes.
- (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
- extended float, convert to double using floatformat_to_double, not
- ieee_extended_to_double, and fetch the data before converting it.
-
-Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: It's sqrt.s, not sqrt.w. From
- davidj@ICSI.Berkeley.EDU (David Johnson).
-
-Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
- PowerPC uses bdnz[l][a].
-
-Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * dis-buf.c, i386-dis.c: Include sysdep.h.
-
-Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
-
- * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
- by Motorola PowerPC 601 with PPC_OPCODE_601.
- * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
- Disassemble Motorola PowerPC 601 instructions as well as normal
- PowerPC instructions.
-
-Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * i960-dis.c (reg, mem): Just use a static array instead of
- calling xmalloc.
-
-Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
-
- * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
- condition name index if this is for a negated condition.
-
- * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
- Floating point format for 'H' operand is backwards from normal
- case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
- operands (fmpyadd and fmpysub), handle bizarre register
- translation correctly for single precision format.
-
- * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
- or 'I' operands if the next format specifier is 'M' (fcmp
- condition completer).
-
-Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
- single number giving a bitmask for the MB and ME fields of an M
- form instruction. Change NB to accept 32, and turn it into 0;
- also turn 0 into 32 when disassembling. Seperated SH from NB.
- (insert_mbe, extract_mbe): New functions.
- (insert_nb, extract_nb): New functions.
- (SC_MASK): Mask out SA and LK bits.
- (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
- RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
- "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
- "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
- "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
- use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
- (powerpc_macros): Define table of macro definitions.
- (powerpc_num_macros): Define.
-
- * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
- if PPC_OPERAND_NEXT is set.
-
-Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
- char. Retrieve contents using bfd_getl32 instead of shifting.
-
-Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * ppc-opc.c: New file. Opcode table for PowerPC, including
- opcodes for POWER (RS/6000).
- * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
- * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
- (CFILES): Add ppc-dis.c.
- (ppc-dis.o, ppc-opc.o): New targets.
- * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
-
-Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
-
- * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
- No space before 'u', 'f', or 'N'.
-
-Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
-
- * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
- farther than we should.
-
- * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
-
-Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
-
- * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
-
-Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
-
- * i960-dis.c (print_insn_i960): Only read word2 if the instruction
- needs it, to prevent reading past the end of a section.
-
-Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
- Removed t,A case for la; always use t,A(b) case.
-
-Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- From Ted Lemen <mellon@pepper.ncd.com>
- * mips-dis.c (print_insn_arg): Handle 'k'.
- * mips-opc.c: Make cache use k, not t.
-
-Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
- FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
- FLOAT_FORMAT_CODE to put out floating point register names.
-
-Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
-
-Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
-
-Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
- larger than 32. Moved dsxx32 variants first for disassembler.
-
-Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
-
- * z8kgen.c, z8k-opc.h: Add full lda information.
-
-Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
-
- * hppa-dis.c (print_insn_hppa): Do not emit a space after
- movb instructions. Any necessary space will be emitted by
- the code to handle nullification completers.
-
-Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
-
-Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
- * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
-
-Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: Correct lwu opcode value (book had it wrong).
-
-Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
-
- * z8k-dis.c (FETCH_DATA): get just the right amount of data.
- (unpack_instr): Cope with ARG_IMM4M1 type instructions.
-
-Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
-
- * m88k-dis.c (m88kdis): comment change. Remove space after
- printing mnemonic.
- (printop): handle new arg types DEC and XREG for m88110.
-
-Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
-
- * hppa-dis.c (print_insn_hppa): Handle 'z' operand
- type for absolute branch addresses. Delete special
- "ble" and "be" code in 'W' operand code.
-
-Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: Set hazard information correctly for branch
- likely instructions.
-
-Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
- info->fprintf_func for printing and info->print_address_func for
- address output.
-
-Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: Set INSN_TRAP for tXX instructions.
-
-Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
- Corrected second case of "b" for disassembler.
-
-Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
- to BFD swapping routines to correspond to BFD name changes.
-
-Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: Change div machine instruction to be z,s,t rather
- than s,t. Change div macro to be d,v,t rather than d,s,t.
- Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
- rem and remu which generates only the corresponding div
- instruction. This is for compatibility with the MIPS assembler,
- which only generates the simple machine instruction when an
- explicit destination of $0 is used.
- * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
-
-Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
- WR_31 hazard for bal, bgezal, bltzal.
-
-Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * hppa-dis.c (print_insn_hppa): Use print function
- from within the disassemble_info, not fprintf_filtered.
-
-Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
- Law, law@cs.utah.edu.)
-
-Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c ("absu"): Removed.
- ("dabs"): Added.
-
-Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: Added r6000 and r4000 instructions and macros.
- Changed hazard information to distinguish between memory load
- delays and coprocessor load delays.
-
-Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
-
-Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
-
- * configure.in: Don't pass cpu to config.bfd.
-
-Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * m88k-dis.c (m88kdis): Make class unsigned.
-
-Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * alpha-dis.c (print_insn_alpha): One branch format case was
- missing the instruction name.
-
-Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
-
- * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
- Add the arch-specific auxiliary files.
- (OFILES): Remove the arch-specific auxiliary files
- and use BFD_MACHINES instead of DIS_LIBS.
- * configure.in: Set BFD_MACHINES based on --with-targets option.
-
-Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
- for swc1.
-
-Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * sparc-opc.c: Change CONST to const to deal with gcc
- -Dconst=__const -traditional.
-
-Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
- coprocessor instructions out of #if 0, and made them use new
- argument type "C".
-
-Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
-
-Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
-
- * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
- instruction, for use by the disassembler.
-
- * sparc-dis.c (SEX): Add sign extension macro. Replace many
- hand-coded sign extensions that depended on 32-bit host ints.
- FIXME, we still depend on big-endian host bitfield ordering.
- (sparc_print_insn): Set the insn_info_valid field, and the
- other fields that describe the instruction being printed.
-
-Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
-
- * sparc-opc.c (call): Accept all 6 addressing modes valid for
- `jmp' instead of just one of them.
-
-Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
-
- * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
- (fput_fp_reg_r): Renamed from fput_reg_r.
- (fput_fp_reg): New function.
- (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
-
- * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
-
- * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
-
-Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
-
- * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
-
- * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
- don't output a space.
-
- * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
-
-Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
-
- * mips-opc.c: New file, containing opcode table from
- ../include/opcode/mips.h.
- * Makefile.in: Add it.
-
-Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * m88k-dis.c: New file, moved in from gdb and changed to use the
- new dis-asm.h disassembler interface.
- * Makefile.in (DIS_LIBS): Added m88k-dis.o.
- (m88k-dis.o): New target.
-
-Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
- argument string const char * to correspond to opcode/mips.h.
-
-Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * mips-dis.c: Updated to account for name changes in new version
- of opcode/mips.h.
- * Makefile.in: Added header file dependencies.
-
-Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
-
- * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
-
-Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
- extend, rather than shifts.
-
-Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
-
- * Makefile.in: Undo 15 June change.
-
-Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
-
- * m68k-dis.c (print_insn_arg): Change return value to byte count
- or error code.
- * m68k-dis.c: Re-write to detect invalid operands before
- printing anything, so we can handle this the same way we
- handle invalid opcodes.
-
-Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
-
- * sh-dis.c, sh-opc.h: Understand some more opcodes.
-
-Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
- header files.
-
-Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * sparc-dis.c: Don't declare qsort, since sysdep.h might.
-
- * configure.in: Do make sysdep.h link.
- * Makefile.in: Search ../include. Don't search ../bfd.
-
-Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
-
- Changes from Jeff Law, law@cs.utah.edu:
- * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
- Do not print a space before the completers specified by
- 'a' and 'd'.
-
-Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
-
- * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
- defined, since gdb has been fixed.
-
- Changes from Jeff Law, law@cs.utah.edu:
- * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
- fput_reg_r, fput_creg, fput_const, and fputs_filtered should
- be a *disassemble_info, not a *FILE.
- * hppa-dis.c: Support 'd', '!', and 'a'.
- * hppa-dis.c: Support 's' to extract a 2 bit space register.
- * hppa-dis.c: Delete cases which are no longer needed.
-
-Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
-
- * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
-
-Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
-
- * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
- H8/300-H opcodes.
-
-Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
-
- * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
- * configure.in: No longer need to configure to get sysdep.h.
-
-Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
-
- * Patches from Jeffrey Law <law@cs.utah.edu>.
- * hppa-dis.c: Support 'I', 'J', and 'K' in output
- templates for 1.1 FP computational instructions.
-
-Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * h8500-dis.c (print_insn_h8500): Address argument is type
- bfd_vma.
- * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
- Ditto.
-
- * h8500-opc.h (addr_class_type): No comma at end of enumerator.
- * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
-
- * sparc-dis.c (compare_opcodes): Move static declaration to
- top-level.
-
-Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
- instruction, remove unimp hack from 'l' argument.
-
-Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
-
- * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
- happy.
-
-Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
- * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
- instructions.
-
-Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
- arrays of string pointers to 2-d arrays of chars, to save
- space.
-
-Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
-
- * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
- Cast second arg to read_memory_func to "bfd_byte *", as necessary.
-
-Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * hppa-dis.c: New file from Utah, adapted to new disassembler
- calling interface.
- * Makefile.in: Include it.
-
-Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * sh-dis.c, sh-opc.h: New files.
-
-Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * alpha-dis.c, alpha-opc.h: New files.
-
-Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
- value.
-
-Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
-
- * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
-
-Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
- const.
-
-Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
-
- * sparc-dis.c: Use fprintf_func a few places where I forgot,
- and double percent signs a few places.
-
- * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
-
- * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
- Use info->print_address_func not print_address.
-
- * dis-buf.c (generic_print_address): New function.
-
-Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * Makefile.in: Add sparc-dis.c.
- sparc-dis.c: New file, merges binutils and gdb versions as follows:
- From GDB:
- Add `add' instruction to the set that get checked
- for a preceding `sethi' in order to print an absolute address.
- * (print_insn): Disassembly prefers real instructions.
- (is_delayed_branch): Speed up.
- * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
- Still missing some float ops, and needs testing.
- * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
- F_ALIAS. Use printf, not fprintf, when not passing a file
- pointer...
- (compare_opcodes): Check that identical instructions have
- identical opcodes, complain otherwise.
- From binutils:
- * New 'm' arg.
- * Include reg_names.
- From neither:
- Use dis-asm.h/read_memory_func interface.
-
-Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
-
- * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
- deliberately return non-zero to setjmp from longjmp. Otherwise
- this code fails to compile.
-
-Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
-
- * m68k-dis.c: Fix prototype for fetch_arg().
-
-Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * dis-buf.c: New file, for new read_memory_func interface.
- Makefile.in (OFILES): Include it.
- m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
- Use new read_memory_func interface.
-
-Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
- * h8500-opc.h: Fix couple of opcodes.
-
-Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
-
- * Makefile.in: add dvi & installcheck targets
-
-Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
-
- * Makefile.in: Update for h8500-dis.c.
-
-Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * h8500-dis.c, h8500-opc.h: New files
-
-Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
-
- * mips-dis.c, z8k-dis.c: Converted to use interface defined in
- ../include/dis-asm.h.
- * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
- and ../gdb/m68k-pinsn.c).
- * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
- and ../gdb/i386-pinsn.c).
- * m68881-ext.c: New file. Moved definition of
- ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
- * Makefile.in: Adjust for new files.
- * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
- * m68k-dis.c: Recognize '9' placement code, so (say) pflush
- can be dis-assembled.
-
-Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * mips-dis.c (print_insn_arg): Now returns void.
-
-Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
-
- * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
- files that use the macros.
-
-Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips-dis.c: New file, from gdb/mips-pinsn.c.
- * Makefile.in (DIS_LIBS): Added mips-dis.o.
- (CFILES): Added mips-dis.c.
-
-Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
- * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
-
-Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
-
- * Makefile.in: Improve *clean rules.
- * configure.in: Allow a default host.
-
-Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
-
- * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
- files include other sysdep files
-
-Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
-
-Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
-
- * configure.in: For host support, use ../bfd/configure.host
- so it stays in sync with the ../bfd/hosts database.
-
-Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
-
- * configure.in: use cpu-vendor-os triple instead of nested cases
-
-Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
-
- * z8k-dis.c (unparse_instr): fix bug where opcode returned was
- *always* the wrong one.
-
-Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * z8kgen.c: added copyright info
-
-Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * z8k-dis.c (unparse_instr): prettier tabs
- * z8kgen.c -> z8k-opc.h: bug fixes in tables
-
-Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
-
- * configure.in: Add ncr* configuration.
- * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
- picayune ANSI compilers happy.
-
-Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
-
- * configure.in (i386): Make i386 and i486 synonymous for now.
- * configure.in (i[34]86-*-sysv4): Add my_host definition.
-
-Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * Makefile.in (install): Fix typo.
-
-Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
-
- * Makefile.in (make): Remove obsolete crud.
- (sparc-opc.o): Avoid Sun Make VPATH bug.
-
-Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
-
- * Makefile.in: since there are no SUBDIRS, remove rule and
- references of subdir_do.
-
-Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * Makefile.in (install): Get the library name right here too.
- Don't install bfd.h, since it's unrelated to this library. No
- subdirs to recurse into, either.
- (CFILES): The source file has a .c suffix, not .o.
-
- * sparc-opc.c: New file, moved from BFD.
- * Makefile.in (OFILES): Build it.
-
-Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
-
- * z8k-dis.c: fixed forward refferences of some declarations.
-
-Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
-
- * Makefile.in: get the name of the library right
-
-Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * z8k-dis.c: knows how to disassemble z8k stuff
- * z8k-opc.h: new file full of z8000 opcodes
-
+For older changes see ChangeLog-9899
\f
Local Variables:
+mode: change-log
+left-margin: 8
+fill-column: 74
version-control: never
End: