+Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
+
+ * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
+ incorrectly defined as 0x16 when it should be 0x15.
+ (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
+ (alpha_insn_set): added cvtst and cvttq float ops. Also added
+ excb (exception barrier) which is defined in the Alpha
+ Architecture Handbook version 2.
+ * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
+ OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
+ disassembled as or, for example.
+
+Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
+ (_print_insn_mips): Change i from int to unsigned int.
+
+Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
+
+ * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
+ from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
+
+Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
+
+ * i386-dis.c: Added Pentium Pro instructions.
+
+Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
+ being for Power2.
+
+Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * sh-opc.h (sh_nibble_type): Added REG_B.
+ (sh_arg_type): Added A_REG_B.
+ (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
+ and stc.l opcodes.
+ * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
+
+Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * disassemble.c (disassembler): Use new bfd_big_endian macro.
+
+Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (distclean): Remove stamp-h. From Ronald
+ F. Guilmette <rfg@monkeys.com>.
+
+Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ From David Mosberger-Tang <davidm@azstarnet.com>:
+ * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
+ instruction.
+
+Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
+ (sh_table): Added many SH3 opcodes.
+ * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
+
+Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
+ (subco,subco.): Mark this PPC, not PPCCOM.
+
+Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Rebuild with autoconf 2.7.
+
+Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Rebuild with autoconf 2.6.
+
+Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
+
+ * configure.in: Sort list of architectures. Accept but do nothing
+ for alliant, convex, pyramid, romp, and tahoe.
+
+Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * a29k-dis.c (print_special): Change num to unsigned int.
+
+Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
+
+ * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
+ shifting it.
+
+Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Call AC_CHECK_PROG to find and cache AR.
+ * configure: Rebuilt.
+
+Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
+
+ * configure.in: Add case for bfd_i860_arch.
+ * configure: Rebuild.
+
Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
* m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
* mips-opc.c: Change unaligned loads and stores with "t,A"
operands to use "t,A(b)".
-start-sanitize-sh3e
Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-dis.c (print_insn_shx): Add F_FR0 support.
-end-sanitize-sh3e
Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
* configure.in: Substitute HDEFINES.
* configure: Rebuild.
-start-sanitize-sh3e
Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h (sh_arg_type): Add F_FR0.
(sh_table, case fmac): Add F_FR0 as first argument.
-end-sanitize-sh3e
Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h (sh_opcode_info): Increase arg array size to 4.
Use them rather than looking through target Makefile fragments.
* configure: Rebuild.
-start-sanitize-sh3e
Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
-end-sanitize-sh3e
Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
* sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
(sparc_{encode,decode}_prefetch): New functions.
* sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
-start-sanitize-sh3e
Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h: Add blank lines to improve readabililty of sh3e
instructions.
-end-sanitize-sh3e
Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-dis.c: Correct comment on first line of file.
and likewise for the size variants. Add dbhs as an alias for
dbcc.
-start-sanitize-sh3e
Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
* sh-opc.h (FP sts instructions): Update to match reality.
-end-sanitize-sh3e
Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
* m68k-dis.c: (fpcr_names): Add % before all register names.
* m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
for jsr.
-start-sanitize-sh3e
Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
* sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
* sh-opc.h (sh_arg_type): Add new operand types.
(sh_table): Add new opcodes from SH3E Floating Point ISA.
-end-sanitize-sh3e
Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
* Makefile.in (distclean): Remove generated file config.h.
projects / deliverable / binutils-gdb.git / blobdiff