+Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
+
+ * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
+ incorrectly defined as 0x16 when it should be 0x15.
+ (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
+ (alpha_insn_set): added cvtst and cvttq float ops. Also added
+ excb (exception barrier) which is defined in the Alpha
+ Architecture Handbook version 2.
+ * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
+ OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
+ disassembled as or, for example.
+
+Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
+ (_print_insn_mips): Change i from int to unsigned int.
+
+Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
+
+ * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
+ from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
+
+Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
+
+ * i386-dis.c: Added Pentium Pro instructions.
+
+Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
+ being for Power2.
+
+Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * sh-opc.h (sh_nibble_type): Added REG_B.
+ (sh_arg_type): Added A_REG_B.
+ (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
+ and stc.l opcodes.
+ * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
+
+Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * disassemble.c (disassembler): Use new bfd_big_endian macro.
+
+Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (distclean): Remove stamp-h. From Ronald
+ F. Guilmette <rfg@monkeys.com>.
+
+Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ From David Mosberger-Tang <davidm@azstarnet.com>:
+ * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
+ instruction.
+
+Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
+ (sh_table): Added many SH3 opcodes.
+ * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
+
+Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
+ (subco,subco.): Mark this PPC, not PPCCOM.
+
+Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Rebuild with autoconf 2.7.
+
+Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Rebuild with autoconf 2.6.
+
+Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
+
+ * configure.in: Sort list of architectures. Accept but do nothing
+ for alliant, convex, pyramid, romp, and tahoe.
+
+Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * a29k-dis.c (print_special): Change num to unsigned int.
+
+Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
+
+ * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
+ shifting it.
+
+Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Call AC_CHECK_PROG to find and cache AR.
+ * configure: Rebuilt.
+
+Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
+
+ * configure.in: Add case for bfd_i860_arch.
+ * configure: Rebuild.
+
+Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
+ * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
+ (NEXTDOUBLE): Likewise.
+ (print_insn_m68k): Don't match fmoveml if there is more than one
+ register in the list.
+ (print_insn_arg): Handle a place of '8' for a type of 'L'.
+
+Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c: Use #W rather than #w.
+ * m68k-dis.c (print_insn_arg): Handle new 'W' place.
+
+Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
+ and likewise for all the dbxx opcodes.
+
+Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
+
+ * arc-dis.c: Include elf-bfd.h rather than libelf.h.
+
+Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
+
+ * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
+ the VR4100 specific instructions to the mips_opcodes structure.
+
+Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * mpw-config.in, mpw-make.sed: Remove ugly workaround for
+ ugly Metrowerks bug in CW6, is fixed in CW7.
+
+Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * ppc-opc.c (whole file): Add flags for common/any support.
+
+Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
+
+ * Makefile.in (BISON): Remove macro.
+ (FLAGS_TO_PASS): Remove BISON.
+
+Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
+
+ Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+
+ * m68k-dis.c (print_insn_m68k): Recognize all two-word
+ instructions that take no args by looking at the match mask.
+ (print_insn_arg): Always print "%" before register names.
+ [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
+ [case '_']: Don't print "@#" before address.
+ [case 'J']: Use "%s" as format string, not register name.
+ [case 'B']: Treat place == 'C' like 'l' and 'L'.
+
+Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
+
+ * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
+ name correctly.
+
+Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
+
+ From David Mosberger-Tang <davidm@azstarnet.com>
+
+ * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
+ (alpha_insn_set): added definitions for VAX floating point
+ instructions (Unix compilers don't generate these, but handcoded
+ assembly might still use them).
+
+ * alpha-dis.c (print_insn_alpha): added support for disassembling
+ the miscellaneous instructions in the Alpha instruction set.
+
+Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
+ no longer create sysdep.h, sed ppc-opc.c to work around a
+ serious Metrowerks C bug.
+ * mpw-make.in: Remove.
+ * mpw-make.sed: New file, used by mpw-configure to edit
+ Makefile.in into an MPW makefile.
+
+Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (maintainer-clean): New synonym for realclean.
+
+Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c: Split pmove patterns which use 'P' into patterns
+ which use '0', '1', and '2' instead. Specify the proper size for
+ a pmove immediate operand. Correct the pmovefd patterns to be
+ moves to a register, not from a register.
+ * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
+
+Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-opc.c (sparc_opcodes): Mark all insns that reference
+ %psr, %wim, %tbr as F_NOTV9.
+
+Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (Makefile): Just rebuild Makefile when running
+ config.status.
+ (config.h, stamp-h): New targets.
+ * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
+ earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
+ rebuilding config.h.
+ * configure: Rebuild.
+
+ * mips-opc.c: Change unaligned loads and stores with "t,A"
+ operands to use "t,A(b)".
+
+Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
+
+ * sh-dis.c (print_insn_shx): Add F_FR0 support.
+
+Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
+
+ * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
+ until 3 instead of until 2.
+
+Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (ALL_CFLAGS): Define.
+ (.c.o, disassemble.o): Use $(ALL_CFLAGS).
+ (MOSTLYCLEAN): Add config.log.
+ (distclean): Don't remove config.log.
+ * configure.in: Substitute HDEFINES.
+ * configure: Rebuild.
+
+Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
+
+ * sh-opc.h (sh_arg_type): Add F_FR0.
+ (sh_table, case fmac): Add F_FR0 as first argument.
+
+Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
+
+ * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
+
+Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-dis.c: Remove all references to NO_V9.
+
Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
* aclocal.m4: Just include ../bfd/aclocal.m4.
Use them rather than looking through target Makefile fragments.
* configure: Rebuild.
-start-sanitize-sh3e
Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
-end-sanitize-sh3e
Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
* sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
(sparc_{encode,decode}_prefetch): New functions.
* sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
-start-sanitize-sh3e
Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-opc.h: Add blank lines to improve readabililty of sh3e
instructions.
-end-sanitize-sh3e
Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* sh-dis.c: Correct comment on first line of file.
and likewise for the size variants. Add dbhs as an alias for
dbcc.
-start-sanitize-sh3e
Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
* sh-opc.h (FP sts instructions): Update to match reality.
-end-sanitize-sh3e
Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
* m68k-dis.c: (fpcr_names): Add % before all register names.
* m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
for jsr.
-start-sanitize-sh3e
Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
* sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
* sh-opc.h (sh_arg_type): Add new operand types.
(sh_table): Add new opcodes from SH3E Floating Point ISA.
-end-sanitize-sh3e
Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
* Makefile.in (distclean): Remove generated file config.h.