start-sanitize-am33
+Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Add DSP autoincrement memory loads/stores.
+
+ * m10300-opc.c: Add autoincrement memory loads/stores.
+
+end-sanitize-am33
+start-sanitize-r5900
+Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
+ phmsubh respectively.
+
+end-sanitize-r5900
+Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
+
+start-sanitize-cygnus
+ * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
+ CGEN_EXTRACT_FN.
+ (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
+ @arch_cgen_get_int_operand.
+ * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
+ Update call to @arch@_cgen_insert_operand.
+ (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
+ * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
+ (extract_insn_normal): New arg `pc', callers updated.
+ Update call to @arch@_cgen_extract_operand.
+ (print_insn): Update call to CGEN_EXTRACT_FN.
+end-sanitize-cygnus
+ * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
+
+start-sanitize-am33
+Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Fix load to sp and store from sp for the am33.
+ Add more multimedia instructions.
+
+Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
+ "mulu".
+
+end-sanitize-am33
+start-sanitize-r5900
+Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
+
+ * mips-opc.c (pref): Enabled for the r5900.
+
+end-sanitize-r5900
+Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
+
+ * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
+ the first prefix.
+ (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
+ than `fnstsw %eax'.
+ (OP_J): Remove unnecessary subtraction when 16-bit displacement
+ will be masked later.
+
+start-sanitize-am33
+Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
+ instructions.
+
+Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
+ from raw register #s to symbolic names to make debugging easier.
+
+end-sanitize-am33
+Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
+
+ * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
+
+Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
+
+ * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
+start-sanitize-cygnus
+ * Makefile.am (CGENDIR): Set via configure.
+ (CGEN): New variable.
+ (CGENFILES): object.scm renamed to cos.scm.
+ (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
+ (stamp-m32r): Pass prefix to run-cgen.
+ * Makefile.in: Regenerate.
+ * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
+ * cgen-dis.in: Ditto.
+ * cgen-opc.in: Ditto.
+ * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
+ * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
+ * configure: Regenerate.
+end-sanitize-cygnus
+
+start-sanitize-am33
+Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
+
+Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-opc.c: Reorder more instructions so that we do not
+ accidentally match a mn10300 instruction when we really
+ wanted an am33 instruction.
+
+end-sanitize-am33
+Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
+
+ * m10300-dis.c: Only recognize instructions from the currently
+ selected machine.
+ * m10300-opc.c: Add field indicating the particular variant of
+ the mn10300 each instruction is available on.
+
+Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: For bfd_vax_arch, build vax-dis.lo.
+ * Makefile.am: Rebuild dependencies.
+ (CFILES): Add vax-dis.c.
+ (ALL_MACHINES): Add vax-dis.lo.
+ * aclocal.m4: Rebuild with current libtool.
+ * configure, Makefile.in: Rebuild.
+
+Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
+
+ * vax-dis.c: New file, from work by Pauline Middelink
+ <middelin@polyware.iaf.nl>.
+ * disassemble.c (ARCH_vax): Define if ARCH_all.
+ (disassembler): Add case for ARCH_vax.
+ * makefile.vms: Support compilation on vms/vax.
+
+start-sanitize-sky
+Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
+
+ * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
+ the DVP_OPERAND_RELOC_11_S4 relocation.
+
+end-sanitize-sky
+start-sanitize-am33
Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
* m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
instructions. Support (sp) addressing mode by expanding it into
(0,sp).
+start-sanitize-sky
+Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
+
+ * dvp-opc.c (LIMM11, LUIMM15): New symbol types
+ DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
+ be used as immediate values.
+
+end-sanitize-sky
start-sanitize-am33
Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
Change pinfo to use WR_HILO.
end-sanitize-vr5400
-start-sanitize-d30v
Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
* d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
LONG_2, LONG_2b formats to use this new operand.
-end-sanitize-d30v
Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
* sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
* sparc-dis.c (print_insn_sparc): big endian instruction / little
endian data support.
-start-sanitize-d30v
Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
* d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
to existing 1.1.1 parallelisation prohibition procedure.
-end-sanitize-d30v
Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
* cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
insns.
end-sanitize-m32rx
-start-sanitize-d30v
Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
* d30v-opc.c (pre_defined_register): Remove alias for r0.
-end-sanitize-d30v
start-sanitize-r5900
Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
* arc-opc.c: Internationalised.
* arm-dis.c: Internationalised.
* cgen-asm.c: Internationalised.
-start-sanitize-d30v
* d30v-dis.c: Internationalised.
-end-sanitize-d30v
* dis-buf.c: Internationalised.
start-sanitize-sky
* dvp-dis.c: Internationalised.
* Branched binutils 2.9.
-start-sanitize-d30v
Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
* d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
disassembling last 4 bytes of a section.
-end-sanitize-d30v
Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
Fix some gcc -Wall warnings:
* cgen-dis.c (build_dis_hash_table): Remove used local variables.
* cgen-opc.c (cgen_keyword_search_next): Likewise.
* d10v-dis.c (dis_long, dis_2_short): Likewise.
-start-sanitize-d30v
* d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
-end-sanitize-d30v
start-sanitize-sky
* dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
* dvp-opc.c (parse_dest1, print_uflags): Likewise.
* a29k-dis.c: Add return type for find_byte_func_type.
* arc-opc.c: Include <stdio.h>. Remove declarations of
insert_multshift and extract_multshift.
-start-sanitize-d30v
* d30v-dis.c (lookup_opcode): Parenthesize assignments in
conditionals.
(extract_value): Fully parenthesize expression.
-end-sanitize-d30v
start-sanitize-sky
* dvp-opc.c: Include <ctype.h>.
(print_sdest): Add default case to switch.
(r5900/msub.s): Takes three operands, not four. Fix opcode.
end-sanitize-r5900
-start-sanitize-d30v
Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (d30v_opcode_table): Indicate which instructions are
delayed branches or jumps.
-end-sanitize-d30v
start-sanitize-sky
Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
* configure, aclocal.m4: Rebuild with new libtool.
-start-sanitize-d30v
Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (repeat{,i} instructions): Repeat/repeati
instructions use a PC relative branch, not absolute.
-end-sanitize-d30v
Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
* configure.in: Set libtool_enable_shared rather than
* mips-opc.c: Add many missing r5900 instructions.
end-sanitize-r5900
-start-sanitize-d30v
Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (d30v_opcode_table): Set new flags bits
FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
-end-sanitize-d30v
1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
* configure: Only build libopcodes shared if --enable-shared's value
* m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
which has a two word opcode with a one word argument.
-start-sanitize-d30v
Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
unsigned, not signed.
(d30v_format_table): Add SHORT_CMPU cases for cmpu.
-end-sanitize-d30v
Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
* sh-dis.c (print_insn_shx): Recognize all sh4 additions.
* mips-opc.c (ffc, ffs): Fix mask.
-start-sanitize-d30v
Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
control registers.
-end-sanitize-d30v
Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
* mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
* v850-opc.c (v850_opcodes): Further rearrangements.
-start-sanitize-d30v
Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
* d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
-end-sanitize-d30v
Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
* v850-opc.c (v850_opcodes): Fields reordered to allow assembler
* v850-opc.c: Initialise processors field of v850_opcode structure.
-start-sanitize-d30v
Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
Merge changes from Martin Hunt:
* d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
-end-sanitize-d30v
start-sanitize-v850e
Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
* mips-opc.c: Add dctr and dctw.
-start-sanitize-d30v
Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* d30v-dis.c (print_insn): Change the way signed constants
are displayed.
-end-sanitize-d30v
+
Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (BFD_H): New variable.
* tic80-dis.c (print_operand_bitnum): Ditto.
end-sanitize-tic80
-start-sanitize-d30v
Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* d30v-opc.c: Removed references to FLAG_X.
-end-sanitize-d30v
Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in: Add dependencies on ../bfd/bfd.h as required.
-start-sanitize-d30v
Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* Makefile.in: Added d30v object files.
* d30v-opc.c: New file.
* disassemble.c (disassembler) Add entry for d30v.
-end-sanitize-d30v
start-sanitize-tic80
Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
projects / deliverable / binutils-gdb.git / blobdiff