+Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
+
+ * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
+
+Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
+
+ * arm-dis.c (print_insn_little_arm): Prevent examination of stored
+ symbol if none is present.
+ (print_insn_big_arm): Prevent examination of stored symbol if
+ none is present.
+
+Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
+
+Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
+
+ * disassemble.c: Remove disasm_symaddr() function.
+
+ * arm-dis.c: Use info->symbol instead of info->flags to determine
+ if disassmbly should be in Thumb or Arm mode.
+
+Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
+
+ * arm-dis.c: Add support for disassembling Thumb opcodes.
+ (print_insn_thumb): New function.
+
+ * disassemble.c (disasm_symaddr): New function.
+
+ * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
+ (thumb_opcodes): Table of Thumb opcodes.
+
+Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+
+ * m68k-opc.c (btst): Change Dd@s to Dd;b.
+
+ * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
+ and 'v' as operand types.
+
+Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
+ <olivier.carmona@di.epfl.ch>.
+ * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
+ which has a two word opcode with a one word argument.
+
+start-sanitize-d30v
+Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
+
+ * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
+ unsigned, not signed.
+ (d30v_format_table): Add SHORT_CMPU cases for cmpu.
+
+end-sanitize-d30v
+start-sanitize-sh4
+Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
+
+ * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
+ * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
+ (ftrv): Slay the cut-and-paste monster.
+
+end-sanitize-sh4
+Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * d10v-dis.c (print_operand):
+ Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
+
+Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * d10v-opc.c (OPERAND_FLAG): Split into:
+ (OPERAND_FFLAG, OPERAND_CFLAG) .
+ (FSRC): Split into:
+ (FFSRC, CFSRC).
+
+Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
+
+ * mips-opc.c: Move the INSN_MACRO ISA value to the membership
+ field for all INSN_MACRO's.
+ * mips16-opc.c: same
+
+Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
+
+ * mips-opc.c (sync,cache): These are 3900 insns.
+
+Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ sh-opc.h (sh_table): Remove ftst/nan.
+
+start-sanitize-vr5400
+Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
+ (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
+ last.
+ * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
+
+end-sanitize-vr5400
+start-sanitize-tx49
+Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
+
+ * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
+ Add tx49 insns and configury.
+
+end-sanitize-tx49
+Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ * mips-opc.c (ffc, ffs): Fix mask.
+
+start-sanitize-d30v
+Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
+
+ * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
+ control registers.
+
+end-sanitize-d30v
+Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
+start-sanitize-vr5400
+ Added VR5400 instructions.
+ (N5): New cpu-id macro.
+end-sanitize-vr5400
+ (WR_HILO, RD_HILO, MOD_HILO): New macros.
+
+Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
+ (WR_HILO, RD_HILO, MOD_HILO): New macros.
+
+Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
+
+ * v850-dis.c (disassemble): Replace // with /* ... */
+
+Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
+
+ * sparc-opc.c: Add wr & rd for v9a asr's.
+ * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
+ (v9a_asr_reg_names): New variable.
+ Patch from David Miller <davem@vger.rutgers.edu>.
+
+Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
+
+ * sparc-opc.c (v9notv9a): New insn type.
+ (IMPDEP): Move to the end to not conflict with edge8 et al.
+ Patch from David Miller <davem@vger.rutgers.edu>.
+
+Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
+
+ * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
+
+Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
+
+ * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
+
+Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
+
+ * v850-dis.c (disassemble): Use new symbol_at_address_func() field
+ of disassemble_info structure to determine if an overlay address
+ has a matching symbol in low memory.
+
+ * dis-buf.c (generic_symbol_at_address): New (dummy) function for
+ new symbol_at_address_func field in disassemble_info structure.
+
+Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
+
+ * v850-opc.c (extract_d22): Use signed arithmatic.
+
+Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
+
+ * mips-opc.c: Three op mult is not an ISA insn.
+
+Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
+
+ * mips-opc.c: Fix formatting.
+
+Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
+ than assuming that char is signed. Explicitly sign extend 16 bit
+ values, rather than assuming that short is 16 bits.
+ (OP_sI, OP_J, OP_DIR): Likewise.
+
+start-sanitize-v850e
+Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
+
+ * v850-dis.c (v850_sreg_names): Use symbolic names for higher
+ system registers.
+
+end-sanitize-v850e
+Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
+
+ * v850-opc.c: Fix typo in comment.
+
+ * v850-dis.c (disassemble): Add test of processor type when
+ determining opcodes.
+
+Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Use a diversion to set enable_shared before the
+ arguments are parsed.
+ * configure: Rebuild.
+
+Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c (TBL1): Use ! rather than `.
+ * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
+
+Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
+
+ * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
+
+ * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
+ for mcf5200.
+
+ * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
+ * aclocal.m4: Rebuild with new libtool.
+ * configure: Rebuild.
+
+start-sanitize-v850e
+Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
+
+end-sanitize-v850e
+Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
+
+Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
+
+ * v850-opc.c (v850_opcodes): Further rearrangements.
+
start-sanitize-d30v
Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
* v850-dis.c (disassemble): Improved display of register lists.
-start-sanitize-v850e
+end-sanitize-v850e
Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
* sparc-opc.c (sparc_opcodes): Fix assembler args to
* alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
+start-sanitize-v850e
Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
* v850-opc.c (v850_opcodes[]): Remove use of flag field.
-start-sanitize-v850eq
* v850-opc.c (v850_opcodes[]): Add support for reversed short load
opcodes..
-start-sanitize-v850eq
-start-sanitize-v850e
Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
* configure (cgen_files): Add support for v850e target.
* configure.in (cgen_files): Add support for v850e target.
-end-sanitize-v850e
-start-sanitize-v850eq
Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
* configure (cgen_files): Add support for v850eq target.
* configure.in (cgen_files): Add support for v850eq target.
-end-sanitize-v850eq
+end-sanitize-v850e
Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
-start-sanitize-v850eq
- * .Sanitize (Do-first): Add support for keep-v850eq command line
- option.
-
+start-sanitize-v850e
* v850-dis.c (disassemble): Add support for v850EQ instructions.
* v850-opc.c (insert_i5div, extract_i5div): New Functions.
(v850_opcodes): Add v850EQ instructions.
-end-sanitize-v850eq
-start-sanitize-v850e
- * .Sanitize (Do-first): Add support for keep-v850e command line
- option.
-
+
* v850-dis.c (disassemble): Add support for v850E instructions.
* v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
insert_spe, extract_spe): New Functions.
(v850_opcodes): Add v850E instructions.
-start-sanitize-v850e
+end-sanitize-v850e
* v850-opc.c: Reorganised and re-layed out to improve readability
and portability.
(v850_opcodes): Fix mask for jarl and jr.
* v850-dis.c: New file. Skeleton for disassembler support.
- * Makefile.in Remove v850 references, they're not needed here
- and they weren't being sanitized away.
+ * Makefile.in Remove v850 references, they're not needed here.
* configure.in: Add v850-dis.o when building v850 toolchains.
* configure: Rebuilt.
* disassemble.c (disassembler): Call v850 disassembler.
projects / deliverable / binutils-gdb.git / blobdiff