+Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-dis.c: Rough cut at printing some operands.
+
+ * mn10300-dis.c: Start working on disassembler support.
+ * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
+
+ * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
+ list.
+ (mn10300_opcodes): Use REGS for register list in "movm" instructions.
+
+start-sanitize-d10v
+Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
+
+end-sanitize-d10v
+Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Demand parens around
+ register argument is calls and jmp instructions.
+
+Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
+ getx operand. Fix opcode for mulqu imm,dn.
+
+Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Hijack "bits" field
+ in MN10300_OPERAND_SPLIT operands for how many bits
+ appear in the basic insn word. Add IMM32_HIGH24,
+ IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
+ (mn10300_opcodes): Use new operands as needed.
+
+ * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
+ for bset, bclr, btst instructions.
+ (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
+
+ * mn10300-opc.c (mn10300_operands): Remove many redundant
+ operands. Update opcode table as appropriate.
+ (IMM32): Add MN10300_OPERAND_SPLIT flag.
+ (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
+
+Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
+ operands (for indexed load/stores). Fix bitpos for DI
+ operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
+ few instructions that insert immediates/displacements in the
+ middle of the instruction. Add IMM8E for 8 bit immediate in
+ the extended part of an instruction.
+ (mn10300_operands): Use new opcodes as appropriate.
+
+start-sanitize-d10v
+Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-opc.c (d10v_opcodes): Declare the trap instruction
+ sequential so the assembler never parallelizes it with
+ other instructions.
+
+end-sanitize-d10v
+Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
+ a data/address register that appears in register field 0
+ and register field 1.
+ (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
+
+Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
+
+ * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
+ standard disassembly.
+
+ * alpha-opc.c (alpha_operands): Rearrange flags slot.
+ (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
+ Recategorize PALcode instructions.
+
+start-sanitize-v850
+Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (v850_opcodes): Add relaxing "jbr".
+
+end-sanitize-v850
+Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
+ there are no operand types.
+
+start-sanitize-v850
+Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (D9_RELAX): Renamed from D9, all references
+ changed.
+ (v850_operands): Make sure D22 immediately follows D9_RELAX.
+
+end-sanitize-v850
+Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
+
+start-sanitize-v850
+Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
+
+ * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
+ and sst.w instructions.
+
+ * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
+ "bCC"instructions).
+
+end-sanitize-v850
+Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-dis.c (_print_insn_mips): Use a tab between the instruction
+ and the arguments.
+
+Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * ppc-opc.c (PPCPWR2): Define.
+ (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
+ it.
+
+Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
+ field for movhu instruction.
+start-sanitize-v850
+
+ * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
+ cast value to "long" not "signed long" to keep hpux10
+ compiler quiet.
+end-sanitize-v850
+
+Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
+ for mov (abs16),DN.
+
+ * mn10300-opc.c (FMT*): Remove definitions.
+
+ * mn10300-opc.c (mn10300_opcodes): Fix destination register
+ for shift-by-register opcodes.
+
+ * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
+ into [AD][MN][01] for encoding the position of the register
+ in the opcode.
+
+Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
+
+ * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
+ "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
+
Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
+ * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
+ Fix various typos. Add "PAREN" operand.
+ (MEM, MEM2): Define.
+ (mn10300_opcodes): Surround all memory addresses with "PAREN"
+ operands. Fix several typos.
+
* mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
changes.