-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@SET_MAKE@
#
-# Copyright (C) 2012-2014 Free Software Foundation, Inc.
+# Copyright (C) 2012-2016 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
$(top_srcdir)/po/Make-in $(srcdir)/../depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
- $(top_srcdir)/../config/zlib.m4 \
$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/gettext-sister.m4 \
$(top_srcdir)/../config/warnings.m4 \
$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
- $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.in
+ $(top_srcdir)/../lt~obsolete.m4 \
+ $(top_srcdir)/../bfd/version.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
am__installdirs = "$(DESTDIR)$(bfdlibdir)" \
"$(DESTDIR)$(bfdincludedir)"
LTLIBRARIES = $(bfdlib_LTLIBRARIES) $(noinst_LTLIBRARIES)
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
DATA = $(bfdinclude_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
+WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
XGETTEXT = @XGETTEXT@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
frv-dis.c \
frv-ibld.c \
frv-opc.c \
+ ft32-dis.c \
+ ft32-opc.c \
h8300-dis.c \
h8500-dis.c \
hppa-dis.c \
v850-dis.c \
v850-opc.c \
vax-dis.c \
+ visium-dis.c \
+ visium-opc.c \
w65-dis.c \
xc16x-asm.c \
xc16x-desc.c \
ALL_MACHINES = $(TARGET_LIBOPCODES_CFILES:.c=.lo)
OFILES = @BFD_MACHINES@
-# We should reconfigure whenever bfd/configure.in changes, because
-# that's where the version number in Makefile comes from.
-CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
+# development.sh is used to determine -Werror default.
+CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(INCDIR) -I$(BFDDIR) @HDEFINES@ @INCINTL@
libopcodes_la_SOURCES = dis-buf.c disassemble.c dis-init.c
# It's desirable to list ../bfd/libbfd.la in DEPENDENCIES and LIBADD.
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
-am--refresh:
+am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
$(am__aclocal_m4_deps):
config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
- else :; fi
+ @if test ! -f $@; then rm -f stamp-h1; else :; fi
+ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
@rm -f stamp-h1
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
install-bfdlibLTLIBRARIES: $(bfdlib_LTLIBRARIES)
@$(NORMAL_INSTALL)
- test -z "$(bfdlibdir)" || $(MKDIR_P) "$(DESTDIR)$(bfdlibdir)"
@list='$(bfdlib_LTLIBRARIES)'; test -n "$(bfdlibdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
else :; fi; \
done; \
test -z "$$list2" || { \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bfdlibdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bfdlibdir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(bfdlibdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(bfdlibdir)"; \
}
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
-libopcodes.la: $(libopcodes_la_OBJECTS) $(libopcodes_la_DEPENDENCIES)
+libopcodes.la: $(libopcodes_la_OBJECTS) $(libopcodes_la_DEPENDENCIES) $(EXTRA_libopcodes_la_DEPENDENCIES)
$(libopcodes_la_LINK) $(am_libopcodes_la_rpath) $(libopcodes_la_OBJECTS) $(libopcodes_la_LIBADD) $(LIBS)
mostlyclean-compile:
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/frv-dis.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/frv-ibld.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/frv-opc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ft32-dis.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ft32-opc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h8300-dis.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h8500-dis.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hppa-dis.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/v850-dis.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/v850-opc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vax-dis.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/visium-dis.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/visium-opc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/w65-dis.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xc16x-asm.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xc16x-desc.Plo@am__quote@
-rm -f libtool config.lt
install-bfdincludeDATA: $(bfdinclude_DATA)
@$(NORMAL_INSTALL)
- test -z "$(bfdincludedir)" || $(MKDIR_P) "$(DESTDIR)$(bfdincludedir)"
@list='$(bfdinclude_DATA)'; test -n "$(bfdincludedir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bfdincludedir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bfdincludedir)" || exit 1; \
+ fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
@$(NORMAL_UNINSTALL)
@list='$(bfdinclude_DATA)'; test -n "$(bfdincludedir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- test -n "$$files" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bfdincludedir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bfdincludedir)" && rm -f $$files
+ dir='$(DESTDIR)$(bfdincludedir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
installcheck: installcheck-recursive
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
config.h i386-opc.h sysdep.h
$(COMPILE_FOR_BUILD) -c $(srcdir)/i386-gen.c
-$(srcdir)/i386-tbl.h: $(srcdir)/i386-init.h
+$(srcdir)/i386-tbl.h: $(srcdir)/i386-init.h
@echo $@
$(srcdir)/i386-init.h: @MAINT@ i386-gen$(EXEEXT_FOR_BUILD) i386-opc.tbl i386-reg.tbl