-# Makefile template for Configure for the opcodes library.
-# Copyright (C) 1990, 1991, 1992 Free Software Foundation, Inc.
-# Written by Cygnus Support.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
+# Makefile.in generated automatically by automake 1.3 from Makefile.am
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-srcdir = .
-
-prefix = /usr/local
-
-exec_prefix = $(prefix)
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-
-datadir = $(prefix)/lib
-mandir = $(prefix)/man
-man1dir = $(mandir)/man1
-man2dir = $(mandir)/man2
-man3dir = $(mandir)/man3
-man4dir = $(mandir)/man4
-man5dir = $(mandir)/man5
-man6dir = $(mandir)/man6
-man7dir = $(mandir)/man7
-man8dir = $(mandir)/man8
-man9dir = $(mandir)/man9
-infodir = $(prefix)/info
-includedir = $(prefix)/include
-oldincludedir =
-docdir = $(srcdir)/doc
-
-SHELL = /bin/sh
-
-INSTALL = install -c
-INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
-
-AR = ar
-AR_FLAGS = qc
-CFLAGS = -g
-BISON = bison
-MAKEINFO = makeinfo
-RANLIB = ranlib
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DISTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+AR = @AR@
+BFD_MACHINES = @BFD_MACHINES@
+CC = @CC@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+EXEEXT = @EXEEXT@
+EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
+HDEFINES = @HDEFINES@
+LIBTOOL = @LIBTOOL@
+RANLIB = @RANLIB@
+WIN32LDFLAGS = @WIN32LDFLAGS@
+WIN32LIBADD = @WIN32LIBADD@
+archdefs = @archdefs@
+cgendir = @cgendir@
+
+AUTOMAKE_OPTIONS = cygnus
+
+SUBDIRS = po
INCDIR = $(srcdir)/../include
-CSEARCH = -I. -I$(srcdir) -I$(INCDIR)
+BFDDIR = $(srcdir)/../bfd
DEP = mkdep
+lib_LTLIBRARIES = libopcodes.la
-TARGETLIB = libopcode.a
+# This is where bfd.h lives.
+BFD_H = ../bfd/bfd.h
+# Header files.
+HFILES = \
+ arm-opc.h \
+ h8500-opc.h \
+ sh-opc.h \
+ sysdep.h \
+ w65-opc.h \
+ z8k-opc.h
-DIS_LIBS = z8k-dis.o
+# C source files that correspond to .o's.
+CFILES = \
+ a29k-dis.c \
+ alpha-dis.c \
+ alpha-opc.c \
+ arm-dis.c \
+ cgen-asm.c \
+ cgen-dis.c \
+ cgen-opc.c \
+ d10v-dis.c \
+ d10v-opc.c \
+ dis-buf.c \
+ disassemble.c \
+ h8300-dis.c \
+ h8500-dis.c \
+ hppa-dis.c \
+ i386-dis.c \
+ i960-dis.c \
+ m32r-asm.c \
+ m32r-dis.c \
+ m32r-opc.c \
+ m68k-dis.c \
+ m68k-opc.c \
+ m88k-dis.c \
+ mips-dis.c \
+ mips-opc.c \
+ mips16-opc.c \
+ m10200-dis.c \
+ m10200-opc.c \
+ m10300-dis.c \
+ m10300-opc.c \
+ ns32k-dis.c \
+ ppc-dis.c \
+ ppc-opc.c \
+ sh-dis.c \
+ sparc-dis.c \
+ sparc-opc.c \
+ tic30-dis.c \
+ vax-dis.c \
+ w65-dis.c \
+ z8k-dis.c \
+ z8kgen.c
+
+ALL_MACHINES = \
+ a29k-dis.lo \
+ alpha-dis.lo \
+ alpha-opc.lo \
+ arc-dis.lo \
+ arc-opc.lo \
+ arm-dis.lo \
+ cgen-asm.lo \
+ cgen-dis.lo \
+ cgen-opc.lo \
+ d10v-dis.lo \
+ d10v-opc.lo \
+ $(start-sanitize-d30v) \
+ d30v-dis.lo \
+ d30v-opc.lo \
+ $(end-sanitize-d30v) \
+ h8300-dis.lo \
+ h8500-dis.lo \
+ hppa-dis.lo \
+ i386-dis.lo \
+ i960-dis.lo \
+ m32r-asm.lo \
+ m32r-dis.lo \
+ m32r-opc.lo \
+ m68k-dis.lo \
+ m68k-opc.lo \
+ m88k-dis.lo \
+ m10200-dis.lo \
+ m10200-opc.lo \
+ m10300-dis.lo \
+ m10300-opc.lo \
+ mips-dis.lo \
+ mips-opc.lo \
+ mips16-opc.lo \
+ ppc-dis.lo \
+ ppc-opc.lo \
+ ns32k-dis.lo \
+ sh-dis.lo \
+ sparc-dis.lo \
+ sparc-opc.lo \
+ tic30-dis.lo \
+ $(start-sanitize-tic80) \
+ tic80-dis.lo \
+ tic80-opc.lo \
+ $(end-sanitize-tic80) \
+ $(start-sanitize-sky) \
+ dvp-dis.lo \
+ dvp-opc.lo \
+ $(end-sanitize-sky) \
+ v850-dis.lo \
+ v850-opc.lo \
+ vax-dis.lo \
+ w65-dis.lo \
+ z8k-dis.lo
+
+OFILES = @BFD_MACHINES@
+
+INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(INCDIR) -I$(BFDDIR) @HDEFINES@ -I$(srcdir)/../intl -I../intl
+
+libopcodes_la_SOURCES = dis-buf.c disassemble.c
+libopcodes_la_DEPENDENCIES = $(OFILES)
+libopcodes_la_LIBADD = $(OFILES) @WIN32LIBADD@
+libopcodes_la_LDFLAGS = -release $(VERSION) @WIN32LDFLAGS@
+
+# libtool will build .libs/libopcodes.a. We create libopcodes.a in
+# the build directory so that we don't have to convert all the
+# programs that use libopcodes.a simultaneously. This is a hack which
+# should be removed if everything else starts using libtool. FIXME.
+
+noinst_LIBRARIES = libopcodes.a
+
+POTFILES = $(HFILES) $(CFILES)
+
+CLEANFILES = libopcodes.a stamp-lib dep.sed .dep .dep1
+# start-sanitize-cygnus
+CLEANFILES = libopcodes.a stamp-lib dep.sed .dep .dep1 stamp-m32r
+# end-sanitize-cygnus
+
+# start-sanitize-cygnus
+# CGEN support is sanitized out of FSF releases for now.
+# Sanitization must be split between assignments and rules because
+# automake splits them that way.
+
+CGENDIR = @cgendir@
+CGEN = @cgen@
+CGENFLAGS = -v
+
+CGENFILES = $(CGENDIR)/cos.scm $(CGENDIR)/utils.scm \
+ $(CGENDIR)/attr.scm $(CGENDIR)/enum.scm $(CGENDIR)/types.scm \
+ $(CGENDIR)/utils-cgen.scm $(CGENDIR)/cpu.scm \
+ $(CGENDIR)/mode.scm $(CGENDIR)/mach.scm \
+ $(CGENDIR)/model.scm $(CGENDIR)/hardware.scm \
+ $(CGENDIR)/ifield.scm $(CGENDIR)/iformat.scm \
+ $(CGENDIR)/operand.scm $(CGENDIR)/insn.scm $(CGENDIR)/minsn.scm \
+ $(CGENDIR)/opcodes.scm $(CGENDIR)/cdl-c.scm \
+ $(CGENDIR)/cgen-opc.scm cgen-opc.in cgen-asm.in cgen-dis.in
+# The CGEN_MAINT conditional is put here so it end up in Makefile.in
+# properly sanitized.
+@CGEN_MAINT_TRUE@M32R_DEPS = stamp-m32r
+@CGEN_MAINT_FALSE@M32R_DEPS =
+# The end marker is written this way to pass through automake unscathed.
+ENDSAN = end-sanitize-cygnus
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I.
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+libopcodes_a_LIBADD =
+libopcodes_a_SOURCES = libopcodes.a.c
+libopcodes_a_OBJECTS = libopcodes.a.o
+LTLIBRARIES = $(lib_LTLIBRARIES)
+
+libopcodes_la_OBJECTS = dis-buf.lo disassemble.lo
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LINK = $(LIBTOOL) --mode=link $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON = ChangeLog Makefile.am Makefile.in acconfig.h acinclude.m4 \
+aclocal.m4 config.in configure configure.in stamp-h.in
+
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP = --best
+SOURCES = libopcodes.a.c $(libopcodes_la_SOURCES)
+OBJECTS = libopcodes.a.o $(libopcodes_la_OBJECTS)
+
+all: all-recursive-am all-am
+
+.SUFFIXES:
+.SUFFIXES: .S .c .lo .o .s
+$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINT@ configure.in acinclude.m4
+ cd $(srcdir) && $(ACLOCAL)
+$(srcdir)/configure: @MAINT@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+
+config.h: stamp-h
+ @:
+stamp-h: $(srcdir)/config.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \
+ $(SHELL) ./config.status
+ @echo timestamp > stamp-h
+$(srcdir)/config.in: @MAINT@$(srcdir)/stamp-h.in
+$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
+ cd $(top_srcdir) && $(AUTOHEADER)
+ @echo timestamp > $(srcdir)/stamp-h.in
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+ -rm -f config.h
+
+maintainer-clean-hdr:
+
+mostlyclean-noinstLIBRARIES:
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+distclean-noinstLIBRARIES:
+
+maintainer-clean-noinstLIBRARIES:
-OFILES = $(DIS_LIBS)
-#### host and target dependent Makefile fragments come in here.
-###
+.c.o:
+ $(COMPILE) -c $<
-FLAGS_TO_PASS = \
- "against=$(against)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC=$(CC)" \
- "CFLAGS=$(CFLAGS)" \
- "RANLIB=$(RANLIB)" \
- "MAKEINFO=$(MAKEINFO)" \
- "INSTALL=$(INSTALL)" \
- "INSTALL_DATA=$(INSTALL_DATA)" \
- "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "BISON=$(BISON)"
+.s.o:
+ $(COMPILE) -c $<
-.c.o:
- $(CC) -c $(CFLAGS) $(HDEFINES) $(TDEFINES) $(CSEARCH) $(CSWITCHES) $<
+.S.o:
+ $(COMPILE) -c $<
+mostlyclean-compile:
+ -rm -f *.o core *.core
-# C source files that correspond to .o's.
-CFILES = z8k-dis.o
+clean-compile:
-STAGESTUFF = $(TARGETLIB) $(OFILES)
+distclean-compile:
+ -rm -f *.tab.c
-all: $(TARGETLIB)
+maintainer-clean-compile:
+.c.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-.NOEXPORT:
+.s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
-check:
+.S.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
-info: force
- @$(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+clean-libtool:
+ -rm -rf .libs _libs
-clean-info:
- @$(MAKE) subdir_do DO=clean-info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
-
-install-info: force
- @$(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
+distclean-libtool:
-# HDEPFILES comes from the host config; TDEPFILES from the target config.
+maintainer-clean-libtool:
+mostlyclean-libLTLIBRARIES:
-$(TARGETLIB): $(OFILES)
- rm -f $(TARGETLIB)
- $(AR) $(AR_FLAGS) $(TARGETLIB) $(OFILES)
- $(RANLIB) $(TARGETLIB)
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-# When compiling archures.c and targets.c, supply the default target
-# info from configure.
+distclean-libLTLIBRARIES:
+maintainer-clean-libLTLIBRARIES:
-subdir_do: force
- @for i in $(DODIRS); do \
- if [ -d ./$$i ] ; then \
- if (cd ./$$i; \
- $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
- else exit 1 ; fi ; \
- else true ; fi ; \
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(libdir)
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ if test -f $$p; then \
+ echo "$(LIBTOOL) --mode=install $(INSTALL_DATA) $$p $(DESTDIR)$(libdir)/$$p"; \
+ $(LIBTOOL) --mode=install $(INSTALL_DATA) $$p $(DESTDIR)$(libdir)/$$p; \
+ else :; fi; \
done
-tags etags: TAGS
-
-TAGS: force
- etags $(INCDIR)/*.h $(srcdir)/*.h $(srcdir)/*.c
-
-clean:
- rm -f *.[oa] *~ core *.E *.p *.ip aout-params.h gen-aout
- $(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
-
-clobber realclean: clean
- rm -f libbfd.a TAGS
- $(MAKE) subdir_do DO=clobber "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
-
-# Mark everything as depending on config.status, since the timestamp on
-# sysdep.h might actually move backwards if we reconfig and relink it
-# to a different hosts/h-xxx.h file. This will force a recompile anyway.
-RECONFIG = config.status
-
-
-
-# This target should be invoked before building a new release.
-# 'VERSION' file must be present and contain a string of the form "x.y"
-#
-roll:
- @V=`cat VERSION` ; \
- MAJ=`sed 's/\..*//' VERSION` ; \
- MIN=`sed 's/.*\.//' VERSION` ; \
- V=$$MAJ.`expr $$MIN + 1` ; \
- rm -f VERSION ; \
- echo $$V >VERSION ; \
- echo Version $$V
-
-# Dummy target to force execution of dependent targets.
-#
-force:
-
-install:
- -parent=`echo $(libdir)|sed -e 's@/[^/]*$$@@'`; \
- if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
- -if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; fi
- $(INSTALL_DATA) libbfd.a $(libdir)/libbfd.a
- $(RANLIB) $(libdir)/libbfd.a
- -parent=`echo $(includedir)|sed -e 's@/[^/]*$$@@'`; \
- if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
- -if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; fi
- $(INSTALL_DATA) $(INCDIR)/bfd.h $(includedir)/bfd.h
- -if [ -z "$(oldincludedir)" ] ; then true ; else if [ -d $(oldincludedir) ] ; then true ; else mkdir $(oldincludedir) ; fi ; $(INSTALL_DATA) $(INCDIR)/bfd.h $(oldincludedir)/bfd.h ; fi
- @$(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
-
-# Target to uncomment host-specific lines in this makefile. Such lines must
-# have the following string beginning in column 1: #__<hostname>__#
-# Original Makefile is backed up as 'Makefile.old'.
-#
-# Invoke with: make make HOST=xxx
-#
-make:
- -@if test $(HOST)x = x ; then \
- echo '\aSpecify "make make HOST=???"'; \
- exit 1; \
- fi ; \
- grep -s "^#The next line was generated by 'make make'" Makefile; \
- if test $$? = 0 ; then \
- echo "\aMakefile has already been processed with 'make make'";\
- exit 1; \
- fi ; \
- mv -f Makefile Makefile.old; \
- echo "#The next line was generated by 'make make'" >Makefile ; \
- echo "HOST=$(HOST)" >>Makefile ; \
- echo >>Makefile ; \
- sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile
-
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
- $(SHELL) ./config.status
-
-dep: $(CFILES)
- mkdep $(CFLAGS) $?
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+ done
+libopcodes.la: $(libopcodes_la_OBJECTS) $(libopcodes_la_DEPENDENCIES)
+ $(LINK) -rpath $(libdir) $(libopcodes_la_LDFLAGS) $(libopcodes_la_OBJECTS) $(libopcodes_la_LIBADD) $(LIBS)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ target=`echo $@ | sed s/-recursive//`; \
+ echo "Making $$target in $$subdir"; \
+ (cd $$subdir && $(MAKE) $$target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+ rev="$$subdir $$rev"; \
+ done; \
+ for subdir in $$rev; do \
+ target=`echo $@ | sed s/-recursive//`; \
+ echo "Making $$target in $$subdir"; \
+ (cd $$subdir && $(MAKE) $$target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ (cd $$subdir && $(MAKE) tags); \
+ done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ done; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)config.in$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.in $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ -rm -rf $(distdir)
+ GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ dc_install_base=`cd $(distdir)/=inst && pwd`; \
+ cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ && $(MAKE) \
+ && $(MAKE) dvi \
+ && $(MAKE) check \
+ && $(MAKE) install \
+ && $(MAKE) installcheck \
+ && $(MAKE) dist
+ -rm -rf $(distdir)
+ @echo "========================"; \
+ echo "$(distdir).tar.gz is ready for distribution"; \
+ echo "========================"
+dist: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+dist-all: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+distdir: $(DISTFILES)
+ -rm -rf $(distdir)
+ mkdir $(distdir)
+ -chmod 777 $(distdir)
+ @for file in $(DISTFILES); do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file; \
+ done
+ for subdir in $(SUBDIRS); do \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ done
+info: info-recursive
+dvi: dvi-recursive
+check:
+ $(MAKE) check-recursive
+installcheck: installcheck-recursive
+install-info: install-info-recursive
+all-recursive-am: config.h
+ $(MAKE) all-recursive
+
+all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) config.h
+
+install-exec-am: install-libLTLIBRARIES
+
+uninstall-am: uninstall-libLTLIBRARIES
+
+install-exec: install-exec-recursive install-exec-am
+ @$(NORMAL_INSTALL)
+
+install-data: install-data-recursive
+ @$(NORMAL_INSTALL)
+
+install: install-recursive install-exec-am
+ @:
+
+uninstall: uninstall-recursive uninstall-am
+
+install-strip:
+ $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs: installdirs-recursive
+ $(mkinstalldirs) $(DATADIR)$(libdir)
+
+
+mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean-am: mostlyclean-hdr mostlyclean-noinstLIBRARIES \
+ mostlyclean-compile mostlyclean-libtool \
+ mostlyclean-libLTLIBRARIES mostlyclean-tags \
+ mostlyclean-generic
+
+clean-am: clean-hdr clean-noinstLIBRARIES clean-compile clean-libtool \
+ clean-libLTLIBRARIES clean-tags clean-generic \
+ mostlyclean-am
+
+distclean-am: distclean-hdr distclean-noinstLIBRARIES distclean-compile \
+ distclean-libtool distclean-libLTLIBRARIES \
+ distclean-tags distclean-generic clean-am
+
+maintainer-clean-am: maintainer-clean-hdr \
+ maintainer-clean-noinstLIBRARIES \
+ maintainer-clean-compile maintainer-clean-libtool \
+ maintainer-clean-libLTLIBRARIES maintainer-clean-tags \
+ maintainer-clean-generic distclean-am
+
+mostlyclean: mostlyclean-recursive mostlyclean-am
+
+clean: clean-recursive clean-am
+
+distclean: distclean-recursive distclean-am
+ -rm -f config.status
+ -rm -f libtool
+
+maintainer-clean: maintainer-clean-recursive maintainer-clean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ -rm -f config.status
+
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+clean-libtool maintainer-clean-libtool mostlyclean-libLTLIBRARIES \
+distclean-libLTLIBRARIES clean-libLTLIBRARIES \
+maintainer-clean-libLTLIBRARIES uninstall-libLTLIBRARIES \
+install-libLTLIBRARIES install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info dvi \
+installcheck install-info all-recursive-am all-am install-exec-am \
+uninstall-am install-exec install-data install uninstall all \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+disassemble.lo: disassemble.c $(INCDIR)/dis-asm.h
+ $(LIBTOOL) --mode=compile $(COMPILE) -c @archdefs@ $(srcdir)/disassemble.c
+
+stamp-lib: libopcodes.la
+ if [ -f .libs/libopcodes.a ]; then \
+ cp .libs/libopcodes.a libopcodes.tmp; \
+ $(SHELL) $(srcdir)/../move-if-change libopcodes.tmp libopcodes.a; \
+ else true; fi
+ touch stamp-lib
+
+libopcodes.a: stamp-lib ; @true
+po/POTFILES.in: @MAINT@ Makefile
+ for file in $(POTFILES); do echo $$file; done | sort > tmp \
+ && mv tmp $(srcdir)/po/POTFILES.in
+
+# We should reconfigure whenever bfd/configure.in changes, because
+# that's where the version number comes from.
+config.status: $(srcdir)/configure $(srcdir)/../bfd/configure.in
+ $(SHELL) ./config.status --recheck
+
+# start-sanitize-cygnus
+cgen:
+ $(SHELL) $(srcdir)/cgen.sh opcodes $(srcdir) $(CGEN) $(CGENDIR) $(CGENFLAGS) $(arch) $(prefix)
+ touch stamp-${prefix}
+
+.PHONY: cgen
+
+# For now, require developers to configure with --enable-cgen-maint.
+m32r-opc.h m32r-opc.c m32r-asm.c m32r-dis.c: $(M32R_DEPS)
+ @true
+stamp-m32r: $(CGENFILES) $(CGENDIR)/m32r.cpu $(CGENDIR)/m32r.opc
+ $(MAKE) cgen arch=m32r prefix=m32r
+# end-sanitize-cygnus
+
+# start-sanitize-tic80
+tic80-dis.lo: tic80-dis.c $(INCDIR)/dis-asm.h ../bfd/bfd.h \
+ $(INCDIR)/opcode/tic80.h
+tic80-opc.lo: tic80-opc.c $(INCDIR)/opcode/tic80.h
+# end-sanitize-tic80
+
+# start-sanitize-sky
+dvp-dis.lo: dvp-dis.c $(INCDIR)/dis-asm.h ../bfd/bfd.h \
+ $(INCDIR)/opcode/dvp.h
+dvp-opc.lo: dvp-opc.c $(INCDIR)/opcode/dvp.h
+
+mips-dis.lo: mips-dis.c
+ $(LIBTOOL) --mode=compile $(COMPILE) -c @archdefs@ $(srcdir)/mips-dis.c
+# end-sanitize-sky
+
+# This dependency stuff is copied from BFD.
+
+.dep: dep.sed $(CFILES) $(HFILES) config.h
+ rm -f .dep1
+ $(MAKE) DEP=$(DEP) .dep1
+ sed -f dep.sed < .dep1 > .dep
+
+.dep1: $(CFILES)
+ rm -f .dep2 .dep2a
+ echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > .dep2
+ echo > .dep2a
+ $(DEP) -f .dep2a $(INCLUDES) $(CFLAGS) $?
+ sed -e '/DO NOT DELETE/d' -e '/^$$/d' < .dep2a >> .dep2
+ rm -f .dep2a
+ $(srcdir)/../move-if-change .dep2 .dep1
+
+dep.sed: dep-in.sed config.status
+ sed <$(srcdir)/dep-in.sed >dep.sed \
+ -e 's!@BFD_H@!$(BFD_H)!' \
+ -e 's!@INCDIR@!$(INCDIR)!' \
+ -e 's!@BFDDIR@!$(BFDDIR)!' \
+ -e 's!@SRCDIR@!$(srcdir)!'
+
+dep: .dep
+ sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile
+ cat .dep >> tmp-Makefile
+ $(srcdir)/../move-if-change tmp-Makefile Makefile
+
+dep-in: .dep
+ sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in
+ cat .dep >> tmp-Makefile.in
+ $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in
+
+dep-am: .dep
+ sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am
+ cat .dep >> tmp-Makefile.am
+ $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am
+
+.PHONY: dep dep-in dep-am
# What appears below is generated by a hacked mkdep using gcc -MM.
# DO NOT DELETE THIS LINE -- mkdep uses it.
# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
-
-
+a29k-dis.lo: a29k-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \
+ $(INCDIR)/ansidecl.h $(INCDIR)/opcode/a29k.h
+alpha-dis.lo: alpha-dis.c $(INCDIR)/ansidecl.h sysdep.h \
+ config.h $(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/opcode/alpha.h
+alpha-opc.lo: alpha-opc.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/alpha.h \
+ $(BFD_H) opintl.h
+arm-dis.lo: arm-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \
+ $(INCDIR)/ansidecl.h arm-opc.h $(INCDIR)/coff/internal.h \
+ $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h opintl.h
+cgen-asm.lo: cgen-asm.c sysdep.h config.h $(INCDIR)/libiberty.h \
+ $(BFD_H) $(INCDIR)/symcat.h $(INCDIR)/opcode/cgen.h \
+ opintl.h
+cgen-dis.lo: cgen-dis.c sysdep.h config.h $(INCDIR)/libiberty.h \
+ $(BFD_H) $(INCDIR)/symcat.h $(INCDIR)/opcode/cgen.h
+cgen-opc.lo: cgen-opc.c sysdep.h config.h $(INCDIR)/libiberty.h \
+ $(BFD_H) $(INCDIR)/symcat.h $(INCDIR)/opcode/cgen.h
+d10v-dis.lo: d10v-dis.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/d10v.h \
+ $(INCDIR)/dis-asm.h $(BFD_H)
+d10v-opc.lo: d10v-opc.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/d10v.h
+dis-buf.lo: dis-buf.c sysdep.h config.h $(INCDIR)/dis-asm.h \
+ $(BFD_H) opintl.h
+disassemble.lo: disassemble.c $(INCDIR)/ansidecl.h \
+ $(INCDIR)/dis-asm.h $(BFD_H)
+h8300-dis.lo: h8300-dis.c $(INCDIR)/opcode/h8300.h \
+ $(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/ansidecl.h opintl.h
+h8500-dis.lo: h8500-dis.c h8500-opc.h $(INCDIR)/dis-asm.h \
+ $(BFD_H) $(INCDIR)/ansidecl.h opintl.h
+hppa-dis.lo: hppa-dis.c sysdep.h config.h $(INCDIR)/dis-asm.h \
+ $(BFD_H) $(BFDDIR)/libhppa.h $(INCDIR)/opcode/hppa.h
+i386-dis.lo: i386-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \
+ $(INCDIR)/ansidecl.h sysdep.h config.h opintl.h
+i960-dis.lo: i960-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \
+ $(INCDIR)/ansidecl.h
+m32r-asm.lo: m32r-asm.c sysdep.h config.h $(BFD_H) \
+ $(INCDIR)/symcat.h m32r-opc.h $(INCDIR)/opcode/cgen.h \
+ opintl.h
+m32r-dis.lo: m32r-dis.c sysdep.h config.h $(INCDIR)/dis-asm.h \
+ $(BFD_H) $(INCDIR)/symcat.h m32r-opc.h $(INCDIR)/opcode/cgen.h \
+ opintl.h
+m32r-opc.lo: m32r-opc.c sysdep.h config.h $(INCDIR)/libiberty.h \
+ $(BFD_H) $(INCDIR)/symcat.h m32r-opc.h $(INCDIR)/opcode/cgen.h \
+ opintl.h
+m68k-dis.lo: m68k-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \
+ $(INCDIR)/ansidecl.h $(INCDIR)/floatformat.h opintl.h \
+ $(INCDIR)/opcode/m68k.h
+m68k-opc.lo: m68k-opc.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/m68k.h
+m88k-dis.lo: m88k-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \
+ $(INCDIR)/ansidecl.h $(INCDIR)/opcode/m88k.h opintl.h
+mips-dis.lo: mips-dis.c sysdep.h config.h $(INCDIR)/dis-asm.h \
+ $(BFD_H) $(INCDIR)/opcode/mips.h opintl.h $(BFDDIR)/elf-bfd.h \
+ $(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \
+ $(INCDIR)/bfdlink.h $(INCDIR)/elf/mips.h
+mips-opc.lo: mips-opc.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/mips.h \
+ vu0.h
+mips16-opc.lo: mips16-opc.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/mips.h
+m10200-dis.lo: m10200-dis.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/mn10200.h \
+ $(INCDIR)/dis-asm.h $(BFD_H) opintl.h
+m10200-opc.lo: m10200-opc.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/mn10200.h
+m10300-dis.lo: m10300-dis.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/mn10300.h \
+ $(INCDIR)/dis-asm.h $(BFD_H) opintl.h
+m10300-opc.lo: m10300-opc.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/mn10300.h
+ns32k-dis.lo: ns32k-dis.c $(BFD_H) $(INCDIR)/ansidecl.h \
+ sysdep.h config.h $(INCDIR)/dis-asm.h $(INCDIR)/opcode/ns32k.h \
+ opintl.h
+ppc-dis.lo: ppc-dis.c $(INCDIR)/ansidecl.h sysdep.h \
+ config.h $(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/opcode/ppc.h
+ppc-opc.lo: ppc-opc.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/ppc.h \
+ opintl.h
+sh-dis.lo: sh-dis.c sh-opc.h $(INCDIR)/dis-asm.h $(BFD_H) \
+ $(INCDIR)/ansidecl.h
+sparc-dis.lo: sparc-dis.c $(INCDIR)/ansidecl.h sysdep.h \
+ config.h $(INCDIR)/opcode/sparc.h $(INCDIR)/dis-asm.h \
+ $(BFD_H) $(INCDIR)/libiberty.h opintl.h
+sparc-opc.lo: sparc-opc.c $(INCDIR)/ansidecl.h $(INCDIR)/opcode/sparc.h
+tic30-dis.lo: tic30-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \
+ $(INCDIR)/ansidecl.h $(INCDIR)/opcode/tic30.h
+vax-dis.lo: vax-dis.c $(INCDIR)/opcode/vax.h $(INCDIR)/dis-asm.h \
+ $(BFD_H) $(INCDIR)/ansidecl.h
+w65-dis.lo: w65-dis.c w65-opc.h $(INCDIR)/dis-asm.h \
+ $(BFD_H) $(INCDIR)/ansidecl.h
+z8k-dis.lo: z8k-dis.c sysdep.h config.h $(INCDIR)/dis-asm.h \
+ $(BFD_H) z8k-opc.h
+z8kgen.lo: z8kgen.c sysdep.h config.h
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
projects / deliverable / binutils-gdb.git / blobdiff