-dnl aclocal.m4 generated automatically by aclocal 1.2
+dnl aclocal.m4 generated automatically by aclocal 1.3
-sinclude(../bfd/acmacros.m4)
+dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+dnl This Makefile.in is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
-dnl This is a copy of AM_PROG_LIBTOOL from libtool 1.0, modified to
-dnl not produce a shared library by default.
-AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_CC])
-AC_REQUIRE([AC_PROG_RANLIB])
-AC_REQUIRE([AM_PROG_LD])
-AC_REQUIRE([AC_PROG_LN_S])
-
-# Always use our own libtool.
-LIBTOOL='$(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)
-
-dnl Allow the --disable-shared flag to stop us from building shared libs.
-AC_ARG_ENABLE(shared,
-[ --enable-shared build shared libraries [default=yes]],
-test "$enableval" = no && libtool_shared=" --disable-shared",
-libtool_shared=--disable-shared)
-
-dnl Allow the --disable-static flag to stop us from building static libs.
-AC_ARG_ENABLE(static,
-[ --enable-static build static libraries [default=yes]],
-test "$enableval" = no && libtool_static=" --disable-static",
-libtool_static=)
-
-libtool_flags="$libtool_shared$libtool_static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-[case "$host" in
-*-*-irix6*)
- for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do
- if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then
- LD="${LD-ld} $f"
- fi
- done
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- CFLAGS="$CFLAGS -belf"
- ;;
-esac]
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-])
-
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AM_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-if test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[case "$LD" in
- /*)
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/ld"; then
- ac_cv_path_LD="$ac_dir/ld"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
- test "$with_gnu_ld" = yes && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
-AM_PROG_LD_GNU
-])
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
-AC_DEFUN(AM_PROG_LD_GNU,
-[AC_CACHE_CHECK([whether we are using GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
-])
+sinclude(../bfd/acinclude.m4)
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
ifelse([$3],,
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
-AM_SANITY_CHECK
-AC_ARG_PROGRAM
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
missing_dir=`cd $ac_aux_dir && pwd`
AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_PROG_MAKE_SET])
+AC_REQUIRE([AC_PROG_MAKE_SET])])
# serial 1
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "$@" = "X"; then
+ if test "[$]*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
+ if test "[$]*" != "X $srcdir/configure conftestfile" \
+ && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
test "[$]2" = conftestfile
)
then
fi
AC_SUBST($1)])
+
+# serial 24 AM_PROG_LIBTOOL
+AC_DEFUN(AM_PROG_LIBTOOL,
+[AC_REQUIRE([AM_ENABLE_SHARED])dnl
+AC_REQUIRE([AM_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AM_PROG_LD])dnl
+AC_REQUIRE([AM_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags=
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ CFLAGS="$CFLAGS -belf"
+ ;;
+
+*-*-cygwin32*)
+ AM_SYS_LIBTOOL_CYGWIN32
+ ;;
+
+esac
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+DLLTOOL="$DLLTOOL" AS="$AS" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+])
+
+# AM_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AM_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AM_ENABLE_SHARED,
+[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT]
+changequote([, ])dnl
+[ --enable-shared=PKGS only build shared libraries if the current package
+ appears as an element in the PKGS list],
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AM_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AM_DISABLE_SHARED,
+[AM_ENABLE_SHARED(no)])
+
+# AM_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AM_DISABLE_STATIC,
+[AM_ENABLE_STATIC(no)])
+
+# AM_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AM_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AM_ENABLE_STATIC,
+[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT]
+changequote([, ])dnl
+[ --enable-static=PKGS only build shared libraries if the current package
+ appears as an element in the PKGS list],
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AM_ENABLE_STATIC_DEFAULT)dnl
+])
+
+
+# AM_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AM_PROG_LD,
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
+ # Accept absolute paths.
+changequote(,)dnl
+ /* | [A-Za-z]:\\*)
+changequote([,])dnl
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(ac_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog"; then
+ ac_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_SUBST(LD)
+AM_PROG_LD_GNU
+])
+
+AC_DEFUN(AM_PROG_LD_GNU,
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ ac_cv_prog_gnu_ld=yes
+else
+ ac_cv_prog_gnu_ld=no
+fi])
+])
+
+# AM_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AM_PROG_NM,
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(ac_cv_path_NM,
+[if test -z "$NM"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/nm; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
+ else
+ ac_cv_path_NM="$ac_dir/nm"
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+else
+ ac_cv_path_NM="$NM" # Let the user override the test with a path.
+fi])
+NM="$ac_cv_path_NM"
+AC_MSG_RESULT([$NM])
+AC_SUBST(NM)
+])
+
+# AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32
+AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32,
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+AC_CHECK_TOOL(AS, as, false)
+])
+
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
# Otherwise set it to "no".
dnl AM_CYGWIN32()
-dnl You might think we can do this by checking for a cygwin32-specific
-dnl cpp define.
AC_DEFUN(AM_CYGWIN32,
[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32,
-[AC_TRY_COMPILE(,[int main () { return __CYGWIN32__; }],
+[AC_TRY_COMPILE(,[return __CYGWIN32__;],
am_cv_cygwin32=yes, am_cv_cygwin32=no)
rm -f conftest*])
CYGWIN32=
dnl environment. But if we're not, then it compiles a test program
dnl to see if there is a suffix for executables.
AC_DEFUN(AM_EXEEXT,
-dnl AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AM_CYGWIN32])
+[AC_REQUIRE([AM_CYGWIN32])
+AC_REQUIRE([AM_MINGW32])
AC_MSG_CHECKING([for executable suffix])
-[AC_CACHE_VAL(am_cv_exeext,
-[if test "$CYGWIN32" = yes; then
+AC_CACHE_VAL(am_cv_exeext,
+[if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
am_cv_exeext=.exe
else
cat > am_c_test.c << 'EOF'
}
EOF
${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+am_cv_exeext=
+for file in am_c_test.*; do
+ case $file in
+ *.c) ;;
+ *.o) ;;
+ *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
+ esac
+done
rm -f am_c_test*])
test x"${am_cv_exeext}" = x && am_cv_exeext=no
fi
AC_MSG_RESULT(${am_cv_exeext})
AC_SUBST(EXEEXT)])
+# Check to see if we're running under Mingw, without using
+# AC_CANONICAL_*. If so, set output variable MINGW32 to "yes".
+# Otherwise set it to "no".
+
+dnl AM_MINGW32()
+AC_DEFUN(AM_MINGW32,
+[AC_CACHE_CHECK(for Mingw32 environment, am_cv_mingw32,
+[AC_TRY_COMPILE(,[return __MINGW32__;],
+am_cv_mingw32=yes, am_cv_mingw32=no)
+rm -f conftest*])
+MINGW32=
+test "$am_cv_mingw32" = yes && MINGW32=yes])
+
+# This file is derived from `gettext.m4'. The difference is that the
+# included macros assume Cygnus-style source and build trees.
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 3
+
+AC_DEFUN(CY_WITH_NLS,
+ [AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+
+ USE_INCLUDED_LIBINTL=no
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ AC_DEFINE(ENABLE_NLS)
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If gettext or catgets are available (in this order) we
+ dnl use this. Else we have to fall back to GNU NLS library.
+ dnl catgets is only used if permitted by option --with-catgets.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+ CATOBJEXT=NONE
+
+ AC_CHECK_HEADER(libintl.h,
+ [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
+ [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
+ gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
+
+ if test "$gt_cv_func_gettext_libc" != "yes"; then
+ AC_CHECK_LIB(intl, bindtextdomain,
+ [AC_CACHE_CHECK([for gettext in libintl],
+ gt_cv_func_gettext_libintl,
+ [AC_TRY_LINK([], [return (int) gettext ("")],
+ gt_cv_func_gettext_libintl=yes,
+ gt_cv_func_gettext_libintl=no)])])
+ fi
+
+ if test "$gt_cv_func_gettext_libc" = "yes" \
+ || test "$gt_cv_func_gettext_libintl" = "yes"; then
+ AC_DEFINE(HAVE_GETTEXT)
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+ if test "$MSGFMT" != "no"; then
+ AC_CHECK_FUNCS(dcgettext)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+ return _nl_msg_cat_cntr],
+ [CATOBJEXT=.gmo
+ DATADIRNAME=share],
+ [CATOBJEXT=.mo
+ DATADIRNAME=lib])
+ INSTOBJEXT=.mo
+ fi
+ fi
+ ])
+
+ dnl In the standard gettext, we would now check for catgets.
+ dnl However, we never want to use catgets for our releases.
+
+ if test "$CATOBJEXT" = "NONE"; then
+ dnl Neither gettext nor catgets in included in the C library.
+ dnl Fall back on GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ INTLOBJS="\$(GETTOBJS)"
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ AC_SUBST(MSGFMT)
+ USE_INCLUDED_LIBINTL=yes
+ CATOBJEXT=.gmo
+ INSTOBJEXT=.mo
+ DATADIRNAME=share
+ INTLDEPS='$(top_builddir)/../intl/libintl.a'
+ INTLLIBS=$INTLDEPS
+ LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
+
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext programs is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ fi
+
+ # We need to process the po/ directory.
+ POSUB=po
+ else
+ DATADIRNAME=share
+ nls_cv_header_intl=libintl.h
+ nls_cv_header_libgt=libgettext.h
+ fi
+
+ # If this is used in GNU gettext we have to set USE_NLS to `yes'
+ # because some of the sources are only built for this goal.
+ if test "$PACKAGE" = gettext; then
+ USE_NLS=yes
+ USE_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl These rules are solely for the distribution goal. While doing this
+ dnl we only have to keep exactly one list of the available catalogs
+ dnl in configure.in.
+ for lang in $ALL_LINGUAS; do
+ GMOFILES="$GMOFILES $lang.gmo"
+ POFILES="$POFILES $lang.po"
+ done
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATALOGS)
+ AC_SUBST(CATOBJEXT)
+ AC_SUBST(DATADIRNAME)
+ AC_SUBST(GMOFILES)
+ AC_SUBST(INSTOBJEXT)
+ AC_SUBST(INTLDEPS)
+ AC_SUBST(INTLLIBS)
+ AC_SUBST(INTLOBJS)
+ AC_SUBST(POFILES)
+ AC_SUBST(POSUB)
+ ])
+
+AC_DEFUN(CY_GNU_GETTEXT,
+ [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_ISC_POSIX])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_C_CONST])dnl
+ AC_REQUIRE([AC_C_INLINE])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h])
+ AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next])
+
+ if test "${ac_cv_func_stpcpy+set}" != "set"; then
+ AC_CHECK_FUNCS(stpcpy)
+ fi
+ if test "${ac_cv_func_stpcpy}" = "yes"; then
+ AC_DEFINE(HAVE_STPCPY)
+ fi
+
+ AM_LC_MESSAGES
+ CY_WITH_NLS
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ AC_MSG_CHECKING(for catalogs to be installed)
+ NEW_LINGUAS=
+ for lang in ${LINGUAS=$ALL_LINGUAS}; do
+ case "$ALL_LINGUAS" in
+ *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ AC_MSG_RESULT($LINGUAS)
+ fi
+
+ dnl Construct list of names of catalog files to be constructed.
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ dnl The reference to <locale.h> in the installed <libintl.h> file
+ dnl must be resolved because we cannot expect the users of this
+ dnl to define HAVE_LOCALE_H.
+ if test $ac_cv_header_locale_h = yes; then
+ INCLUDE_LOCALE_H="#include <locale.h>"
+ else
+ INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>. Take care yourself. */"
+ fi
+ AC_SUBST(INCLUDE_LOCALE_H)
+
+ dnl Determine which catalog format we have (if any is needed)
+ dnl For now we know about two different formats:
+ dnl Linux libc-5 and the normal X/Open format
+ if test -f $srcdir/po2tbl.sed.in; then
+ if test "$CATOBJEXT" = ".cat"; then
+ AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
+
+ dnl Transform the SED scripts while copying because some dumb SEDs
+ dnl cannot handle comments.
+ sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
+ fi
+ dnl po2tbl.sed is always needed.
+ sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+ $srcdir/po2tbl.sed.in > po2tbl.sed
+ fi
+
+ dnl In the intl/Makefile.in we have a special dependency which makes
+ dnl only sense for gettext. We comment this out for non-gettext
+ dnl packages.
+ if test "$PACKAGE" = "gettext"; then
+ GT_NO="#NO#"
+ GT_YES=
+ else
+ GT_NO=
+ GT_YES="#YES#"
+ fi
+ AC_SUBST(GT_NO)
+ AC_SUBST(GT_YES)
+
+ MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
+ AC_SUBST(MKINSTALLDIRS)
+
+ dnl *** For now the libtool support in intl/Makefile is not for real.
+ l=
+ AC_SUBST(l)
+
+ dnl Generate list of files to be processed by xgettext which will
+ dnl be included in po/Makefile. But only do this if the po directory
+ dnl exists in srcdir.
+ if test -d $srcdir/po; then
+ test -d po || mkdir po
+ if test "x$srcdir" != "x."; then
+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+ posrcprefix="$srcdir/"
+ else
+ posrcprefix="../$srcdir/"
+ fi
+ else
+ posrcprefix="../"
+ fi
+ rm -f po/POTFILES
+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+ < $srcdir/po/POTFILES.in > po/POTFILES
+ fi
+ ])
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+# This file file be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+ [if test $ac_cv_header_locale_h = yes; then
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES)
+ fi
+ fi])
+
projects / deliverable / binutils-gdb.git / blobdiff