/* Opcode table for the ARC.
- Copyright 1994, 1995 Free Software Foundation, Inc.
+ Copyright 1994, 1995, 1997, 1998, 2000, 2001, 2002, 2004, 2005, 2007
+ Free Software Foundation, Inc.
Contributed by Doug Evans (dje@cygnus.com).
-
- This program is free software; you can redistribute it and/or modify
+
+ This file is part of libopcodes.
+
+ This library is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ It is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* The ARC may eventually be bi-endian.
- Keep this file byte order independent. */
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
+#include "sysdep.h"
+#include <stdio.h>
#include "ansidecl.h"
+#include "bfd.h"
#include "opcode/arc.h"
+#include "opintl.h"
+
+enum operand {OP_NONE,OP_REG,OP_SHIMM,OP_LIMM};
+
+#define OPERANDS 3
+
+enum operand ls_operand[OPERANDS];
+
+struct arc_opcode *arc_ext_opcodes;
+struct arc_ext_operand_value *arc_ext_operands;
+
+#define LS_VALUE 0
+#define LS_DEST 0
+#define LS_BASE 1
+#define LS_OFFSET 2
+
+/* Given a format letter, yields the index into `arc_operands'.
+ eg: arc_operand_map['a'] = REGA. */
+unsigned char arc_operand_map[256];
+
+/* Nonzero if we've seen an 'f' suffix (in certain insns). */
+static int flag_p;
+
+/* Nonzero if we've finished processing the 'f' suffix. */
+static int flagshimm_handled_p;
+
+/* Nonzero if we've seen a 'a' suffix (address writeback). */
+static int addrwb_p;
+
+/* Nonzero if we've seen a 'q' suffix (condition code). */
+static int cond_p;
+
+/* Nonzero if we've inserted a nullify condition. */
+static int nullify_p;
+
+/* The value of the a nullify condition we inserted. */
+static int nullify;
+
+/* Nonzero if we've inserted jumpflags. */
+static int jumpflags_p;
+
+/* Nonzero if we've inserted a shimm. */
+static int shimm_p;
+
+/* The value of the shimm we inserted (each insn only gets one but it can
+ appear multiple times). */
+static int shimm;
+
+/* Nonzero if we've inserted a limm (during assembly) or seen a limm
+ (during disassembly). */
+static int limm_p;
+/* The value of the limm we inserted. Each insn only gets one but it can
+ appear multiple times. */
+static long limm;
+\f
#define INSERT_FN(fn) \
-static arc_insn fn PARAMS ((arc_insn, const struct arc_operand *, \
- int, const struct arc_operand_value *, long, \
- const char **))
+static arc_insn fn (arc_insn, const struct arc_operand *, \
+ int, const struct arc_operand_value *, long, \
+ const char **)
+
#define EXTRACT_FN(fn) \
-static long fn PARAMS ((arc_insn *, const struct arc_operand *, \
- int, const struct arc_operand_value **, int *))
+static long fn (arc_insn *, const struct arc_operand *, \
+ int, const struct arc_operand_value **, int *)
INSERT_FN (insert_reg);
INSERT_FN (insert_shimmfinish);
INSERT_FN (insert_limmfinish);
-INSERT_FN (insert_shimmoffset);
-INSERT_FN (insert_shimmzero);
+INSERT_FN (insert_offset);
+INSERT_FN (insert_base);
+INSERT_FN (insert_st_syntax);
+INSERT_FN (insert_ld_syntax);
+INSERT_FN (insert_addr_wb);
INSERT_FN (insert_flag);
+INSERT_FN (insert_nullify);
INSERT_FN (insert_flagfinish);
INSERT_FN (insert_cond);
INSERT_FN (insert_forcelimm);
INSERT_FN (insert_reladdr);
+INSERT_FN (insert_absaddr);
+INSERT_FN (insert_jumpflags);
INSERT_FN (insert_unopmacro);
-INSERT_FN (insert_multshift);
EXTRACT_FN (extract_reg);
+EXTRACT_FN (extract_ld_offset);
+EXTRACT_FN (extract_ld_syntax);
+EXTRACT_FN (extract_st_offset);
+EXTRACT_FN (extract_st_syntax);
EXTRACT_FN (extract_flag);
EXTRACT_FN (extract_cond);
EXTRACT_FN (extract_reladdr);
+EXTRACT_FN (extract_jumpflags);
EXTRACT_FN (extract_unopmacro);
-EXTRACT_FN (extract_multshift);
/* Various types of ARC operands, including insn suffixes. */
'c' REGC register C field
'S' SHIMMFINISH finish inserting a shimm value
'L' LIMMFINISH finish inserting a limm value
- 'd' SHIMMOFFSET shimm offset in ld,st insns
- '0' SHIMMZERO 0 shimm value in ld,st insns
+ 'o' OFFSET offset in st insns
+ 'O' OFFSET offset in ld insns
+ '0' SYNTAX_ST_NE enforce store insn syntax, no errors
+ '1' SYNTAX_LD_NE enforce load insn syntax, no errors
+ '2' SYNTAX_ST enforce store insn syntax, errors, last pattern only
+ '3' SYNTAX_LD enforce load insn syntax, errors, last pattern only
+ 's' BASE base in st insn
'f' FLAG F flag
'F' FLAGFINISH finish inserting the F flag
'G' FLAGINSN insert F flag in "flag" insn
'n' DELAY N field (nullify field)
'q' COND condition code field
'Q' FORCELIMM set `cond_p' to 1 to ensure a constant is a limm
- 'B' BRANCH branch address
+ 'B' BRANCH branch address (22 bit pc relative)
+ 'J' JUMP jump address (26 bit absolute)
+ 'j' JUMPFLAGS optional high order bits of 'J'
'z' SIZE1 size field in ld a,[b,c]
'Z' SIZE10 size field in ld a,[b,shimm]
'y' SIZE22 size field in st c,[b,shimm]
'w' ADDRESS3 write-back field in ld a,[b,c]
'W' ADDRESS12 write-back field in ld a,[b,shimm]
'v' ADDRESS24 write-back field in st c,[b,shimm]
- 'D' CACHEBYPASS5 direct to memory enable (cache bypass) in ld a,[b,c]
- 'e' CACHEBYPASS14 direct to memory enable (cache bypass) in ld a,[b,shimm]
- 'E' CACHEBYPASS26 direct to memory enable (cache bypass) in st c,[b,shimm]
- 'u' UNSIGNED unsigned multiply
- 's' SATURATION saturation limit in audio arc mac insn
+ 'e' CACHEBYPASS5 cache bypass in ld a,[b,c]
+ 'E' CACHEBYPASS14 cache bypass in ld a,[b,shimm]
+ 'D' CACHEBYPASS26 cache bypass in st c,[b,shimm]
'U' UNOPMACRO fake operand to copy REGB to REGC for unop macros
The following modifiers may appear between the % and char (eg: %.f):
Fields are:
- CHAR BITS SHIFT FLAGS INSERT_FN EXTRACT_FN
-*/
+ CHAR BITS SHIFT FLAGS INSERT_FN EXTRACT_FN */
const struct arc_operand arc_operands[] =
{
-/* place holder (??? not sure if needed) */
+/* Place holder (??? not sure if needed). */
#define UNUSED 0
- { 0 },
+ { 0, 0, 0, 0, 0, 0 },
-/* register A or shimm/limm indicator */
+/* Register A or shimm/limm indicator. */
#define REGA (UNUSED + 1)
- { 'a', 6, ARC_SHIFT_REGA, 0, insert_reg, extract_reg },
+ { 'a', 6, ARC_SHIFT_REGA, ARC_OPERAND_SIGNED | ARC_OPERAND_ERROR, insert_reg, extract_reg },
-/* register B or shimm/limm indicator */
+/* Register B or shimm/limm indicator. */
#define REGB (REGA + 1)
- { 'b', 6, ARC_SHIFT_REGB, 0, insert_reg, extract_reg },
+ { 'b', 6, ARC_SHIFT_REGB, ARC_OPERAND_SIGNED | ARC_OPERAND_ERROR, insert_reg, extract_reg },
-/* register C or shimm/limm indicator */
+/* Register C or shimm/limm indicator. */
#define REGC (REGB + 1)
- { 'c', 6, ARC_SHIFT_REGC, 0, insert_reg, extract_reg },
+ { 'c', 6, ARC_SHIFT_REGC, ARC_OPERAND_SIGNED | ARC_OPERAND_ERROR, insert_reg, extract_reg },
-/* fake operand used to insert shimm value into most instructions */
+/* Fake operand used to insert shimm value into most instructions. */
#define SHIMMFINISH (REGC + 1)
{ 'S', 9, 0, ARC_OPERAND_SIGNED + ARC_OPERAND_FAKE, insert_shimmfinish, 0 },
-/* fake operand used to insert limm value into most instructions */
+/* Fake operand used to insert limm value into most instructions. */
#define LIMMFINISH (SHIMMFINISH + 1)
- { 'L', 32, 32, ARC_OPERAND_ABSOLUTE + ARC_OPERAND_FAKE, insert_limmfinish, 0 },
+ { 'L', 32, 32, ARC_OPERAND_ADDRESS + ARC_OPERAND_LIMM + ARC_OPERAND_FAKE, insert_limmfinish, 0 },
-/* shimm operand when there is no reg indicator (ld,st) */
-#define SHIMMOFFSET (LIMMFINISH + 1)
- { 'd', 9, 0, ARC_OPERAND_SIGNED, insert_shimmoffset, 0 },
+/* Shimm operand when there is no reg indicator (st). */
+#define ST_OFFSET (LIMMFINISH + 1)
+ { 'o', 9, 0, ARC_OPERAND_LIMM | ARC_OPERAND_SIGNED | ARC_OPERAND_STORE, insert_offset, extract_st_offset },
-/* 0 shimm operand for ld,st insns */
-#define SHIMMZERO (SHIMMOFFSET + 1)
- { '0', 9, 0, ARC_OPERAND_FAKE, insert_shimmzero, 0 },
+/* Shimm operand when there is no reg indicator (ld). */
+#define LD_OFFSET (ST_OFFSET + 1)
+ { 'O', 9, 0,ARC_OPERAND_LIMM | ARC_OPERAND_SIGNED | ARC_OPERAND_LOAD, insert_offset, extract_ld_offset },
-/* flag update bit (insertion is defered until we know how) */
-#define FLAG (SHIMMZERO + 1)
+/* Operand for base. */
+#define BASE (LD_OFFSET + 1)
+ { 's', 6, ARC_SHIFT_REGB, ARC_OPERAND_LIMM | ARC_OPERAND_SIGNED, insert_base, extract_reg},
+
+/* 0 enforce syntax for st insns. */
+#define SYNTAX_ST_NE (BASE + 1)
+ { '0', 9, 0, ARC_OPERAND_FAKE, insert_st_syntax, extract_st_syntax },
+
+/* 1 enforce syntax for ld insns. */
+#define SYNTAX_LD_NE (SYNTAX_ST_NE + 1)
+ { '1', 9, 0, ARC_OPERAND_FAKE, insert_ld_syntax, extract_ld_syntax },
+
+/* 0 enforce syntax for st insns. */
+#define SYNTAX_ST (SYNTAX_LD_NE + 1)
+ { '2', 9, 0, ARC_OPERAND_FAKE | ARC_OPERAND_ERROR, insert_st_syntax, extract_st_syntax },
+
+/* 0 enforce syntax for ld insns. */
+#define SYNTAX_LD (SYNTAX_ST + 1)
+ { '3', 9, 0, ARC_OPERAND_FAKE | ARC_OPERAND_ERROR, insert_ld_syntax, extract_ld_syntax },
+
+/* Flag update bit (insertion is defered until we know how). */
+#define FLAG (SYNTAX_LD + 1)
{ 'f', 1, 8, ARC_OPERAND_SUFFIX, insert_flag, extract_flag },
-/* fake utility operand to finish 'f' suffix handling */
+/* Fake utility operand to finish 'f' suffix handling. */
#define FLAGFINISH (FLAG + 1)
{ 'F', 1, 8, ARC_OPERAND_FAKE, insert_flagfinish, 0 },
-/* fake utility operand to set the 'f' flag for the "flag" insn */
+/* Fake utility operand to set the 'f' flag for the "flag" insn. */
#define FLAGINSN (FLAGFINISH + 1)
{ 'G', 1, 8, ARC_OPERAND_FAKE, insert_flag, 0 },
-/* branch delay types */
+/* Branch delay types. */
#define DELAY (FLAGINSN + 1)
- { 'n', 2, 5, ARC_OPERAND_SUFFIX },
+ { 'n', 2, 5, ARC_OPERAND_SUFFIX , insert_nullify, 0 },
-/* conditions */
+/* Conditions. */
#define COND (DELAY + 1)
{ 'q', 5, 0, ARC_OPERAND_SUFFIX, insert_cond, extract_cond },
-/* set `cond_p' to 1 to ensure a constant is treated as a limm */
+/* Set `cond_p' to 1 to ensure a constant is treated as a limm. */
#define FORCELIMM (COND + 1)
- { 'Q', 0, 0, ARC_OPERAND_FAKE, insert_forcelimm },
+ { 'Q', 0, 0, ARC_OPERAND_FAKE, insert_forcelimm, 0 },
-/* branch address b, bl, and lp insns */
+/* Branch address; b, bl, and lp insns. */
#define BRANCH (FORCELIMM + 1)
- { 'B', 20, 7, ARC_OPERAND_RELATIVE + ARC_OPERAND_SIGNED, insert_reladdr, extract_reladdr },
+ { 'B', 20, 7, (ARC_OPERAND_RELATIVE_BRANCH + ARC_OPERAND_SIGNED) | ARC_OPERAND_ERROR, insert_reladdr, extract_reladdr },
+
+/* Jump address; j insn (this is basically the same as 'L' except that the
+ value is right shifted by 2). */
+#define JUMP (BRANCH + 1)
+ { 'J', 24, 32, ARC_OPERAND_ERROR | (ARC_OPERAND_ABSOLUTE_BRANCH + ARC_OPERAND_LIMM + ARC_OPERAND_FAKE), insert_absaddr, 0 },
-/* size field, stored in bit 1,2 */
-#define SIZE1 (BRANCH + 1)
- { 'z', 2, 1, ARC_OPERAND_SUFFIX },
+/* Jump flags; j{,l} insn value or'ed into 'J' addr for flag values. */
+#define JUMPFLAGS (JUMP + 1)
+ { 'j', 6, 26, ARC_OPERAND_JUMPFLAGS | ARC_OPERAND_ERROR, insert_jumpflags, extract_jumpflags },
-/* size field, stored in bit 10,11 */
+/* Size field, stored in bit 1,2. */
+#define SIZE1 (JUMPFLAGS + 1)
+ { 'z', 2, 1, ARC_OPERAND_SUFFIX, 0, 0 },
+
+/* Size field, stored in bit 10,11. */
#define SIZE10 (SIZE1 + 1)
- { 'Z', 2, 10, ARC_OPERAND_SUFFIX, },
+ { 'Z', 2, 10, ARC_OPERAND_SUFFIX, 0, 0 },
-/* size field, stored in bit 22,23 */
+/* Size field, stored in bit 22,23. */
#define SIZE22 (SIZE10 + 1)
- { 'y', 2, 22, ARC_OPERAND_SUFFIX, },
+ { 'y', 2, 22, ARC_OPERAND_SUFFIX, 0, 0 },
-/* sign extend field, stored in bit 0 */
+/* Sign extend field, stored in bit 0. */
#define SIGN0 (SIZE22 + 1)
- { 'x', 1, 0, ARC_OPERAND_SUFFIX },
+ { 'x', 1, 0, ARC_OPERAND_SUFFIX, 0, 0 },
-/* sign extend field, stored in bit 9 */
+/* Sign extend field, stored in bit 9. */
#define SIGN9 (SIGN0 + 1)
- { 'X', 1, 9, ARC_OPERAND_SUFFIX },
+ { 'X', 1, 9, ARC_OPERAND_SUFFIX, 0, 0 },
-/* address write back, stored in bit 3 */
+/* Address write back, stored in bit 3. */
#define ADDRESS3 (SIGN9 + 1)
- { 'w', 1, 3, ARC_OPERAND_SUFFIX },
+ { 'w', 1, 3, ARC_OPERAND_SUFFIX, insert_addr_wb, 0},
-/* address write back, stored in bit 12 */
+/* Address write back, stored in bit 12. */
#define ADDRESS12 (ADDRESS3 + 1)
- { 'W', 1, 12, ARC_OPERAND_SUFFIX },
+ { 'W', 1, 12, ARC_OPERAND_SUFFIX, insert_addr_wb, 0},
-/* address write back, stored in bit 24 */
+/* Address write back, stored in bit 24. */
#define ADDRESS24 (ADDRESS12 + 1)
- { 'v', 1, 24, ARC_OPERAND_SUFFIX },
+ { 'v', 1, 24, ARC_OPERAND_SUFFIX, insert_addr_wb, 0},
-/* cache bypass, stored in bit 5 */
+/* Cache bypass, stored in bit 5. */
#define CACHEBYPASS5 (ADDRESS24 + 1)
- { 'D', 1, 5, ARC_OPERAND_SUFFIX },
+ { 'e', 1, 5, ARC_OPERAND_SUFFIX, 0, 0 },
-/* cache bypass, stored in bit 14 */
+/* Cache bypass, stored in bit 14. */
#define CACHEBYPASS14 (CACHEBYPASS5 + 1)
- { 'e', 1, 14, ARC_OPERAND_SUFFIX },
+ { 'E', 1, 14, ARC_OPERAND_SUFFIX, 0, 0 },
-/* cache bypass, stored in bit 26 */
+/* Cache bypass, stored in bit 26. */
#define CACHEBYPASS26 (CACHEBYPASS14 + 1)
- { 'E', 1, 26, ARC_OPERAND_SUFFIX },
-
-/* unsigned multiply */
-#define UNSIGNED (CACHEBYPASS26 + 1)
- { 'u', 1, 27, ARC_OPERAND_SUFFIX },
+ { 'D', 1, 26, ARC_OPERAND_SUFFIX, 0, 0 },
-/* unsigned multiply */
-#define SATURATION (UNSIGNED + 1)
- { 's', 1, 28, ARC_OPERAND_SUFFIX },
-
-/* unop macro, used to copy REGB to REGC */
-#define UNOPMACRO (SATURATION + 1)
+/* Unop macro, used to copy REGB to REGC. */
+#define UNOPMACRO (CACHEBYPASS26 + 1)
{ 'U', 6, ARC_SHIFT_REGC, ARC_OPERAND_FAKE, insert_unopmacro, extract_unopmacro },
/* '.' modifier ('.' required). */
#define MODDOT (UNOPMACRO + 1)
- { '.', 1, 0, ARC_MOD_DOT },
+ { '.', 1, 0, ARC_MOD_DOT, 0, 0 },
/* Dummy 'r' modifier for the register table.
It's called a "dummy" because there's no point in inserting an 'r' into all
the %a/%b/%c occurrences in the insn table. */
#define REG (MODDOT + 1)
- { 'r', 6, 0, ARC_MOD_REG },
+ { 'r', 6, 0, ARC_MOD_REG, 0, 0 },
/* Known auxiliary register modifier (stored in shimm field). */
#define AUXREG (REG + 1)
- { 'A', 9, 0, ARC_MOD_AUXREG },
-
-/* end of list place holder */
- { 0 }
-};
-
-/* Given a format letter, yields the index into `arc_operands'.
- eg: arc_operand_map['a'] = REGA. */
-unsigned char arc_operand_map[256];
-
-#define I(x) (((x) & 31) << 27)
-#define A(x) (((x) & ARC_MASK_REG) << ARC_SHIFT_REGA)
-#define B(x) (((x) & ARC_MASK_REG) << ARC_SHIFT_REGB)
-#define C(x) (((x) & ARC_MASK_REG) << ARC_SHIFT_REGC)
-#define R(x,b,m) (((x) & (m)) << (b)) /* value X, mask M, at bit B */
+ { 'A', 9, 0, ARC_MOD_AUXREG, 0, 0 },
-/* ARC instructions (sorted by at least the first letter, and equivalent
- opcodes kept together).
-
- By recording the insns this way, the table is not hashable on the opcode.
- That's not a real loss though as there are only a few entries for each
- insn (ld/st being the exception), which are quickly found and since
- they're stored together (eg: all `ld' variants are together) very little
- time is spent on the opcode itself. The slow part is parsing the options,
- but that's always going to be slow.
-
- Longer versions of insns must appear before shorter ones (if gas sees
- "lsr r2,r3,1" when it's parsing "lsr %a,%b" it will think the ",1" is
- junk). */
-
-/* ??? This table also includes macros: asl, lsl, and mov. The ppc port has
- a more general facility for dealing with macros which could be used if
- we need to. */
-/* ??? As an experiment, the "mov" macro appears at the start so it is
- prefered to "and" when disassembling. At present, the table needn't be
- sorted, though all opcodes with the same first letter must be kept
- together. */
-
-const struct arc_opcode arc_opcodes[] = {
- { "mac%u%.s%.q%.f %a,%b,%c%F%S%L", I(-4), I(24), ARC_MACH_AUDIO },
- /* Note that "mov" is really an "and". */
- { "mov%.q%.f %a,%b%F%S%L%U", I(-1), I(12) },
- { "mul%u%.q%.f %a,%b,%c%F%S%L", I(-2), I(28), ARC_MACH_AUDIO },
- /* ??? This insn allows an optional "0," preceding the args. */
- /* We can't use %u here because it's not a suffix (the "64" is in the way). */
- { "mul64%.q%.f %b,%c%F%S%L", I(-1)+A(-1), I(20)+A(-1), ARC_MACH_HOST+ARC_MACH_GRAPHICS },
- { "mulu64%.q%.f %b,%c%F%S%L", I(-1)+A(-1), I(21)+A(-1), ARC_MACH_HOST+ARC_MACH_GRAPHICS },
-
- { "adc%.q%.f %a,%b,%c%F%S%L", I(-1), I(9) },
- { "add%.q%.f %a,%b,%c%F%S%L", I(-1), I(8) },
- { "and%.q%.f %a,%b,%c%F%S%L", I(-1), I(12) },
- { "asl%.q%.f %a,%b,%c%F%S%L", I(-1), I(16), ARC_MACH_HOST+ARC_MACH_GRAPHICS },
- /* Note that "asl" is really an "add". */
- { "asl%.q%.f %a,%b%F%S%L%U", I(-1), I(8) },
- { "asr%.q%.f %a,%b,%c%F%S%L", I(-1), I(18), ARC_MACH_HOST+ARC_MACH_GRAPHICS },
- { "asr%.q%.f %a,%b%F%S%L", I(-1)+C(-1), I(3)+C(1) },
- { "bic%.q%.f %a,%b,%c%F%S%L", I(-1), I(14) },
- { "b%q%.n %B", I(-1), I(4) },
- { "bl%q%.n %B", I(-1), I(5) },
- { "extb%.q%.f %a,%b%F%S%L", I(-1)+C(-1), I(3)+C(7) },
- { "extw%.q%.f %a,%b%F%S%L", I(-1)+C(-1), I(3)+C(8) },
- { "flag%.q %b%G%S%L", I(-1)+A(-1)+C(-1), I(3)+A(ARC_REG_SHIMM_UPDATE)+C(0) },
- /* %Q: force cond_p=1 --> no shimm values */
- { "j%q%Q%.n%.f %b%L", I(-1)+A(-1)+C(-1)+R(-1,7,1), I(7)+A(0)+C(0)+R(0,7,1) },
- /* Put opcode 1 ld insns first so shimm gets prefered over limm. */
- /* "[%b]" is before "[%b,%d]" so 0 offsets don't get printed. */
- { "ld%Z%.X%.v%.e %0%a,[%b]%L", I(-1)+R(-1,13,1)+R(-1,0,511), I(1)+R(0,13,1)+R(0,0,511) },
- { "ld%Z%.X%.v%.e %a,[%b,%d]%S%L", I(-1)+R(-1,13,1), I(1)+R(0,13,1) },
- { "ld%z%.x%.u%.D %a,[%b,%c]", I(-1)+R(-1,4,1)+R(-1,6,7), I(0)+R(0,4,1)+R(0,6,7) },
- { "lp%q%.n %B", I(-1), I(6), },
- { "lr %a,[%Ab]%S%L", I(-1)+C(-1), I(1)+C(0x10) },
- /* Note that "lsl" is really an "add". */
- { "lsl%.q%.f %a,%b%F%S%L%U", I(-1), I(8) },
- { "lsr%.q%.f %a,%b,%c%F%S%L", I(-1), I(17), ARC_MACH_HOST+ARC_MACH_GRAPHICS },
- { "lsr%.q%.f %a,%b%F%S%L", I(-1)+C(-1), I(3)+C(2) },
- /* Note that "nop" is really an "xor". */
- { "nop", 0xffffffff, 0x7fffffff },
- { "or%.q%.f %a,%b,%c%F%S%L", I(-1), I(13) },
- /* ??? The %a here should be %p or something. */
- { "padc%.q%.f %a,%b,%c%F%S%L", I(-1), I(25), ARC_MACH_GRAPHICS },
- { "padd%.q%.f %a,%b,%c%F%S%L", I(-1), I(24), ARC_MACH_GRAPHICS },
- /* Note that "pmov" is really a "pand". */
- { "pmov%.q%.f %a,%b%F%S%L%U", I(-1), I(28), ARC_MACH_GRAPHICS },
- { "pand%.q%.f %a,%b,%c%F%S%L", I(-1), I(28), ARC_MACH_GRAPHICS },
- { "psbc%.q%.f %a,%b,%c%F%S%L", I(-1), I(27), ARC_MACH_GRAPHICS },
- { "psub%.q%.f %a,%b,%c%F%S%L", I(-1), I(26), ARC_MACH_GRAPHICS },
- /* Note that "rlc" is really an "adc". */
- { "rlc%.q%.f %a,%b%F%S%L%U", I(-1), I(9) },
- { "ror%.q%.f %a,%b,%c%F%S%L", I(-1), I(19), ARC_MACH_HOST+ARC_MACH_GRAPHICS },
- { "ror%.q%.f %a,%b%F%S%L", I(-1)+C(-1), I(3)+C(3) },
- { "rrc%.q%.f %a,%b%F%S%L", I(-1)+C(-1), I(3)+C(4) },
- { "sbc%.q%.f %a,%b,%c%F%S%L", I(-1), I(11) },
- { "sexb%.q%.f %a,%b%F%S%L", I(-1)+C(-1), I(3)+C(5) },
- { "sexw%.q%.f %a,%b%F%S%L", I(-1)+C(-1), I(3)+C(6) },
- { "sr %c,[%Ab]%S%L", I(-1)+A(-1), I(2)+A(0x10) },
- /* "[%b]" is before "[%b,%d]" so 0 offsets don't get printed. */
- { "st%y%.w%.E %0%c,[%b]%L", I(-1)+R(-1,25,3)+R(-1,21,1)+R(-1,0,511), I(2)+R(0,25,3)+R(0,21,1)+R(0,0,511) },
- { "st%y%.w%.E %c,[%b,%d]%S%L", I(-1)+R(-1,25,3)+R(-1,21,1), I(2)+R(0,25,3)+R(0,21,1) },
- { "sub%.q%.f %a,%b,%c%F%S%L", I(-1), I(10) },
- { "swap%.q%.f %a,%b%F%S%L", I(-1)+C(-1), I(3)+C(9), ARC_MACH_AUDIO },
- { "xor%.q%.f %a,%b,%c%F%S%L", I(-1), I(15) }
-};
-int arc_opcodes_count = sizeof (arc_opcodes) / sizeof (arc_opcodes[0]);
-
-const struct arc_operand_value arc_reg_names[] =
-{
- /* Sort this so that the first 61 entries are sequential.
- IE: For each i (i<61), arc_reg_names[i].value == i. */
-
- { "r0", 0, REG }, { "r1", 1, REG }, { "r2", 2, REG }, { "r3", 3, REG },
- { "r4", 4, REG }, { "r5", 5, REG }, { "r6", 6, REG }, { "r7", 7, REG },
- { "r8", 8, REG }, { "r9", 9, REG }, { "r10", 10, REG }, { "r11", 11, REG },
- { "r12", 12, REG }, { "r13", 13, REG }, { "r14", 14, REG }, { "r15", 15, REG },
- { "r16", 16, REG }, { "r17", 17, REG }, { "r18", 18, REG }, { "r19", 19, REG },
- { "r20", 20, REG }, { "r21", 21, REG }, { "r22", 22, REG }, { "r23", 23, REG },
- { "r24", 24, REG }, { "r25", 25, REG }, { "r26", 26, REG }, { "fp", 27, REG },
- { "sp", 28, REG }, { "ilink1", 29, REG }, { "ilink2", 30, REG }, { "blink", 31, REG },
- { "r32", 32, REG }, { "r33", 33, REG }, { "r34", 34, REG }, { "r35", 35, REG },
- { "r36", 36, REG }, { "r37", 37, REG }, { "r38", 38, REG }, { "r39", 39, REG },
- { "r40", 40, REG }, { "r41", 41, REG }, { "r42", 42, REG }, { "r43", 43, REG },
- { "r44", 44, REG }, { "r45", 45, REG }, { "r46", 46, REG }, { "r47", 47, REG },
- { "r48", 48, REG }, { "r49", 49, REG }, { "r50", 50, REG }, { "r51", 51, REG },
- { "r52", 52, REG }, { "r53", 53, REG }, { "r54", 54, REG }, { "r55", 55, REG },
- { "r56", 56, REG }, { "r57", 57, REG }, { "r58", 58, REG }, { "r59", 59, REG },
- { "lp_count", 60, REG },
-
- /* I'd prefer to output these as "fp" and "sp" by default, but we still need
- to recognize the canonical values. */
- { "r27", 27, REG }, { "r28", 28, REG },
-
- /* Standard auxiliary registers. */
- { "status", 0, AUXREG },
- { "semaphore", 1, AUXREG },
- { "lp_start", 2, AUXREG },
- { "lp_end", 3, AUXREG },
- { "identity", 4, AUXREG },
- { "debug", 5, AUXREG },
-
- /* Host ARC Extensions. */
- { "mlo", 57, REG, ARC_MACH_HOST },
- { "mmid", 58, REG, ARC_MACH_HOST },
- { "mhi", 59, REG, ARC_MACH_HOST },
- { "ivic", 0x10, AUXREG, ARC_MACH_HOST },
- { "ivdc", 0x11, AUXREG, ARC_MACH_HOST },
- { "ivdcn", 0x12, AUXREG, ARC_MACH_HOST },
- { "flushd", 0x13, AUXREG, ARC_MACH_HOST },
- { "saha", 0x14, AUXREG, ARC_MACH_HOST },
- { "gahd", 0x15, AUXREG, ARC_MACH_HOST },
- { "aahd", 0x16, AUXREG, ARC_MACH_HOST },
- { "rrcr", 0x17, AUXREG, ARC_MACH_HOST },
- { "rpcr", 0x18, AUXREG, ARC_MACH_HOST },
- { "flushdn", 0x19, AUXREG, ARC_MACH_HOST },
- { "dbgad1", 0x1a, AUXREG, ARC_MACH_HOST },
- { "dbgad2", 0x1b, AUXREG, ARC_MACH_HOST },
- { "dbgmde", 0x1c, AUXREG, ARC_MACH_HOST },
- { "dbgstat", 0x1d, AUXREG, ARC_MACH_HOST },
- { "wag", 0x1e, AUXREG, ARC_MACH_HOST },
- { "mulhi", 0x1f, AUXREG, ARC_MACH_HOST },
- { "intwide", 0x20, AUXREG, ARC_MACH_HOST },
- { "intgen", 0x21, AUXREG, ARC_MACH_HOST },
- { "rfsh_n", 0x22, AUXREG, ARC_MACH_HOST },
-
- /* Graphics ARC Extensions. */
- { "mlo", 57, REG, ARC_MACH_GRAPHICS },
- { "mmid", 58, REG, ARC_MACH_GRAPHICS },
- { "mhi", 59, REG, ARC_MACH_GRAPHICS },
- { "ivic", 0x10, AUXREG, ARC_MACH_GRAPHICS },
- { "wag", 0x1e, AUXREG, ARC_MACH_GRAPHICS },
- { "mulhi", 0x1f, AUXREG, ARC_MACH_GRAPHICS },
- { "intwide", 0x20, AUXREG, ARC_MACH_GRAPHICS },
- { "intgen", 0x21, AUXREG, ARC_MACH_GRAPHICS },
- { "pix", 0x100, AUXREG, ARC_MACH_GRAPHICS },
- { "scratch", 0x120, AUXREG, ARC_MACH_GRAPHICS },
-
- /* Audio ARC Extensions. */
- { "macmode", 39, REG, ARC_MACH_AUDIO },
- { "rs1", 40, REG, ARC_MACH_AUDIO },
- { "rs1n", 41, REG, ARC_MACH_AUDIO },
- { "rs1start", 42, REG, ARC_MACH_AUDIO },
- { "rs1size", 43, REG, ARC_MACH_AUDIO },
- { "rs1delta", 44, REG, ARC_MACH_AUDIO },
- { "rs1pos", 45, REG, ARC_MACH_AUDIO },
- { "rd1", 46, REG, ARC_MACH_AUDIO },
- { "rd1n", 47, REG, ARC_MACH_AUDIO },
- { "rd1d", 48, REG, ARC_MACH_AUDIO },
- { "rd1pos", 49, REG, ARC_MACH_AUDIO },
- { "rs2", 50, REG, ARC_MACH_AUDIO },
- { "rs2n", 51, REG, ARC_MACH_AUDIO },
- { "rs2start", 52, REG, ARC_MACH_AUDIO },
- { "rs2size", 53, REG, ARC_MACH_AUDIO },
- { "rs2delta", 54, REG, ARC_MACH_AUDIO },
- { "rs2pos", 55, REG, ARC_MACH_AUDIO },
- { "rd2", 56, REG, ARC_MACH_AUDIO },
- { "rd2n", 57, REG, ARC_MACH_AUDIO },
- { "rd2d", 58, REG, ARC_MACH_AUDIO },
- { "rd2pos", 59, REG, ARC_MACH_AUDIO },
- { "ivic", 0x10, AUXREG, ARC_MACH_AUDIO },
- { "wag", 0x1e, AUXREG, ARC_MACH_AUDIO },
- { "intwide", 0x20, AUXREG, ARC_MACH_AUDIO },
- { "intgen", 0x21, AUXREG, ARC_MACH_AUDIO },
- { "bm_sstart", 0x30, AUXREG, ARC_MACH_AUDIO },
- { "bm_length", 0x31, AUXREG, ARC_MACH_AUDIO },
- { "bm_rstart", 0x32, AUXREG, ARC_MACH_AUDIO },
- { "bm_go", 0x33, AUXREG, ARC_MACH_AUDIO },
- { "xtp_newval", 0x40, AUXREG, ARC_MACH_AUDIO },
- { "sram", 0x400, AUXREG, ARC_MACH_AUDIO },
- { "reg_file", 0x800, AUXREG, ARC_MACH_AUDIO },
+/* End of list place holder. */
+ { 0, 0, 0, 0, 0, 0 }
};
-int arc_reg_names_count = sizeof (arc_reg_names) / sizeof (arc_reg_names[0]);
-
-/* The suffix table.
- Operands with the same name must be stored together. */
-
-const struct arc_operand_value arc_suffixes[] =
-{
- /* Entry 0 is special, default values aren't printed by the disassembler. */
- { "", 0, -1 },
- { "al", 0, COND },
- { "ra", 0, COND },
- { "eq", 1, COND },
- { "z", 1, COND },
- { "ne", 2, COND },
- { "nz", 2, COND },
- { "p", 3, COND },
- { "pl", 3, COND },
- { "n", 4, COND },
- { "mi", 4, COND },
- { "c", 5, COND },
- { "cs", 5, COND },
- { "lo", 5, COND },
- { "nc", 6, COND },
- { "cc", 6, COND },
- { "hs", 6, COND },
- { "v", 7, COND },
- { "vs", 7, COND },
- { "nv", 8, COND },
- { "vc", 8, COND },
- { "gt", 9, COND },
- { "ge", 10, COND },
- { "lt", 11, COND },
- { "le", 12, COND },
- { "hi", 13, COND },
- { "ls", 14, COND },
- { "pnz", 15, COND },
- { "f", 1, FLAG },
- { "nd", 0, DELAY },
- { "d", 1, DELAY },
- { "jd", 2, DELAY },
-/* { "b", 7, SIZEEXT },*/
-/* { "b", 5, SIZESEX },*/
- { "b", 1, SIZE1 },
- { "b", 1, SIZE10 },
- { "b", 1, SIZE22 },
-/* { "w", 8, SIZEEXT },*/
-/* { "w", 6, SIZESEX },*/
- { "w", 2, SIZE1 },
- { "w", 2, SIZE10 },
- { "w", 2, SIZE22 },
- { "x", 1, SIGN0 },
- { "x", 1, SIGN9 },
- { "a", 1, ADDRESS3 },
- { "a", 1, ADDRESS12 },
- { "a", 1, ADDRESS24 },
- { "di", 1, CACHEBYPASS5 },
- { "di", 1, CACHEBYPASS14 },
- { "di", 1, CACHEBYPASS26 },
-
- /* Audio ARC Extensions. */
- /* ??? The values here are guesses. */
- { "ss", 16, COND, ARC_MACH_AUDIO },
- { "sc", 17, COND, ARC_MACH_AUDIO },
- { "mh", 18, COND, ARC_MACH_AUDIO },
- { "ml", 19, COND, ARC_MACH_AUDIO },
-};
-int arc_suffixes_count = sizeof (arc_suffixes) / sizeof (arc_suffixes[0]);
-
-/* Configuration flags. */
-
-/* Various ARC_HAVE_XXX bits. */
-static int cpu_type;
-
-/* Initialize any tables that need it.
- Must be called once at start up (or when first needed).
-
- FLAGS is a set of bits that say what version of the cpu we have. */
-
-void
-arc_opcode_init_tables (flags)
- int flags;
-{
- register int i,n;
-
- cpu_type = flags;
-
- memset (arc_operand_map, 0, sizeof (arc_operand_map));
- n = sizeof (arc_operands) / sizeof (arc_operands[0]);
- for (i = 0; i < n; i++)
- arc_operand_map[arc_operands[i].fmt] = i;
-}
-
-/* Return non-zero if OPCODE is supported on the specified cpu.
- Cpu selection is made when calling `arc_opcode_init_tables'. */
-
-int
-arc_opcode_supported (opcode)
- const struct arc_opcode *opcode;
-{
- if (ARC_OPCODE_MACH (opcode->flags) == 0)
- return 1;
- if (ARC_OPCODE_MACH (opcode->flags) & ARC_HAVE_MACH (cpu_type))
- return 1;
- return 0;
-}
-
-/* Return non-zero if OPVAL is supported on the specified cpu.
- Cpu selection is made when calling `arc_opcode_init_tables'. */
-
-int
-arc_opval_supported (opval)
- const struct arc_operand_value *opval;
-{
- if (ARC_OPVAL_MACH (opval->flags) == 0)
- return 1;
- if (ARC_OPVAL_MACH (opval->flags) & ARC_HAVE_MACH (cpu_type))
- return 1;
- return 0;
-}
\f
-/* Nonzero if we've seen an 'f' suffix (in certain insns). */
-static int flag_p;
-
-/* Nonzero if we've finished processing the 'f' suffix. */
-static int flagshimm_handled_p;
-
-/* Nonzero if we've seen a 'q' suffix (condition code). */
-static int cond_p;
-
-/* Nonzero if we've inserted a shimm. */
-static int shimm_p;
-
-/* The value of the shimm we inserted (each insn only gets one but it can
- appear multiple times. */
-static int shimm;
-
-/* Nonzero if we've inserted a limm (during assembly) or seen a limm
- (during disassembly). */
-static int limm_p;
-
-/* The value of the limm we inserted. Each insn only gets one but it can
- appear multiple times. */
-static long limm;
-
-/* Called by the assembler before parsing an instruction. */
-
-void
-arc_opcode_init_insert ()
-{
- flag_p = 0;
- flagshimm_handled_p = 0;
- cond_p = 0;
- shimm_p = 0;
- limm_p = 0;
-}
-
-/* Called by the assembler to see if the insn has a limm operand.
- Also called by the disassembler to see if the insn contains a limm. */
-
-int
-arc_opcode_limm_p (limmp)
- long *limmp;
-{
- if (limmp)
- *limmp = limm;
- return limm_p;
-}
-
/* Insert a value into a register field.
If REG is NULL, then this is actually a constant.
We must also handle auxiliary registers for lr/sr insns. */
static arc_insn
-insert_reg (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_reg (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods,
+ const struct arc_operand_value *reg,
+ long value,
+ const char **errmsg)
{
static char buf[100];
+ enum operand op_type = OP_NONE;
- if (!reg)
+ if (reg == NULL)
{
/* We have a constant that also requires a value stored in a register
field. Handle these by updating the register field and saving the
we have to use a limm. */
&& (!shimm_p || shimm == value))
{
- int marker = flag_p ? ARC_REG_SHIMM_UPDATE : ARC_REG_SHIMM;
- flagshimm_handled_p = 1;
- shimm_p = 1;
- shimm = value;
+ int marker;
+
+ op_type = OP_SHIMM;
+ /* Forget about shimm as dest mlm. */
+
+ if ('a' != operand->fmt)
+ {
+ shimm_p = 1;
+ shimm = value;
+ flagshimm_handled_p = 1;
+ marker = flag_p ? ARC_REG_SHIMM_UPDATE : ARC_REG_SHIMM;
+ }
+ else
+ {
+ /* Don't request flag setting on shimm as dest. */
+ marker = ARC_REG_SHIMM;
+ }
insn |= marker << operand->shift;
- /* insn |= value & 511; - done later */
+ /* insn |= value & 511; - done later. */
}
/* We have to use a limm. If we've already seen one they must match. */
else if (!limm_p || limm == value)
{
+ op_type = OP_LIMM;
limm_p = 1;
limm = value;
insn |= ARC_REG_LIMM << operand->shift;
/* The constant is stored later. */
}
else
- {
- *errmsg = "unable to fit different valued constants into instruction";
- }
+ *errmsg = _("unable to fit different valued constants into instruction");
}
else
{
if (reg->type == AUXREG)
{
if (!(mods & ARC_MOD_AUXREG))
- *errmsg = "auxiliary register not allowed here";
+ *errmsg = _("auxiliary register not allowed here");
else
{
+ if ((insn & I(-1)) == I(2)) /* Check for use validity. */
+ {
+ if (reg->flags & ARC_REGISTER_READONLY)
+ *errmsg = _("attempt to set readonly register");
+ }
+ else
+ {
+ if (reg->flags & ARC_REGISTER_WRITEONLY)
+ *errmsg = _("attempt to read writeonly register");
+ }
insn |= ARC_REG_SHIMM << operand->shift;
insn |= reg->value << arc_operands[reg->type].shift;
}
}
else
{
+ /* check for use validity. */
+ if ('a' == operand->fmt || ((insn & I(-1)) < I(2)))
+ {
+ if (reg->flags & ARC_REGISTER_READONLY)
+ *errmsg = _("attempt to set readonly register");
+ }
+ if ('a' != operand->fmt)
+ {
+ if (reg->flags & ARC_REGISTER_WRITEONLY)
+ *errmsg = _("attempt to read writeonly register");
+ }
/* We should never get an invalid register number here. */
if ((unsigned int) reg->value > 60)
{
- sprintf (buf, "invalid register number `%d'", reg->value);
+ sprintf (buf, _("invalid register number `%d'"), reg->value);
*errmsg = buf;
}
- else
- insn |= reg->value << operand->shift;
+ insn |= reg->value << operand->shift;
+ op_type = OP_REG;
}
}
+ switch (operand->fmt)
+ {
+ case 'a':
+ ls_operand[LS_DEST] = op_type;
+ break;
+ case 's':
+ ls_operand[LS_BASE] = op_type;
+ break;
+ case 'c':
+ if ((insn & I(-1)) == I(2))
+ ls_operand[LS_VALUE] = op_type;
+ else
+ ls_operand[LS_OFFSET] = op_type;
+ break;
+ case 'o': case 'O':
+ ls_operand[LS_OFFSET] = op_type;
+ break;
+ }
+
return insn;
}
/* Called when we see an 'f' flag. */
static arc_insn
-insert_flag (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_flag (arc_insn insn,
+ const struct arc_operand *operand ATTRIBUTE_UNUSED,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg ATTRIBUTE_UNUSED)
{
/* We can't store anything in the insn until we've parsed the registers.
Just record the fact that we've got this flag. `insert_reg' will use it
to store the correct value (ARC_REG_SHIMM_UPDATE or bit 0x100). */
flag_p = 1;
+ return insn;
+}
+/* Called when we see an nullify condition. */
+
+static arc_insn
+insert_nullify (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value,
+ const char **errmsg ATTRIBUTE_UNUSED)
+{
+ nullify_p = 1;
+ insn |= (value & ((1 << operand->bits) - 1)) << operand->shift;
+ nullify = value;
return insn;
}
we've parsed the registers. */
static arc_insn
-insert_flagfinish (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_flagfinish (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg ATTRIBUTE_UNUSED)
{
if (flag_p && !flagshimm_handled_p)
{
/* Called when we see a conditional flag (eg: .eq). */
static arc_insn
-insert_cond (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_cond (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value,
+ const char **errmsg ATTRIBUTE_UNUSED)
{
cond_p = 1;
insn |= (value & ((1 << operand->bits) - 1)) << operand->shift;
??? The mechanism is sound. Access to it is a bit klunky right now. */
static arc_insn
-insert_forcelimm (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_forcelimm (arc_insn insn,
+ const struct arc_operand *operand ATTRIBUTE_UNUSED,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg ATTRIBUTE_UNUSED)
{
cond_p = 1;
return insn;
}
-/* Used in ld/st insns to handle the shimm offset field. */
+static arc_insn
+insert_addr_wb (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg ATTRIBUTE_UNUSED)
+{
+ addrwb_p = 1 << operand->shift;
+ return insn;
+}
static arc_insn
-insert_shimmoffset (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_base (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods,
+ const struct arc_operand_value *reg,
+ long value,
+ const char **errmsg)
{
- insn |= (value & ((1 << operand->bits) - 1)) << operand->shift;
+ if (reg != NULL)
+ {
+ arc_insn myinsn;
+ myinsn = insert_reg (0, operand,mods, reg, value, errmsg) >> operand->shift;
+ insn |= B(myinsn);
+ ls_operand[LS_BASE] = OP_REG;
+ }
+ else if (ARC_SHIMM_CONST_P (value) && !cond_p)
+ {
+ if (shimm_p && value != shimm)
+ {
+ /* Convert the previous shimm operand to a limm. */
+ limm_p = 1;
+ limm = shimm;
+ insn &= ~C(-1); /* We know where the value is in insn. */
+ insn |= C(ARC_REG_LIMM);
+ ls_operand[LS_VALUE] = OP_LIMM;
+ }
+ insn |= ARC_REG_SHIMM << operand->shift;
+ shimm_p = 1;
+ shimm = value;
+ ls_operand[LS_BASE] = OP_SHIMM;
+ ls_operand[LS_OFFSET] = OP_SHIMM;
+ }
+ else
+ {
+ if (limm_p && value != limm)
+ {
+ *errmsg = _("too many long constants");
+ return insn;
+ }
+ limm_p = 1;
+ limm = value;
+ insn |= B(ARC_REG_LIMM);
+ ls_operand[LS_BASE] = OP_LIMM;
+ }
+
+ return insn;
+}
+
+/* Used in ld/st insns to handle the offset field. We don't try to
+ match operand syntax here. we catch bad combinations later. */
+
+static arc_insn
+insert_offset (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods,
+ const struct arc_operand_value *reg,
+ long value,
+ const char **errmsg)
+{
+ long minval, maxval;
+
+ if (reg != NULL)
+ {
+ arc_insn myinsn;
+ myinsn = insert_reg (0,operand,mods,reg,value,errmsg) >> operand->shift;
+ ls_operand[LS_OFFSET] = OP_REG;
+ if (operand->flags & ARC_OPERAND_LOAD) /* Not if store, catch it later. */
+ if ((insn & I(-1)) != I(1)) /* Not if opcode == 1, catch it later. */
+ insn |= C (myinsn);
+ }
+ else
+ {
+ /* This is *way* more general than necessary, but maybe some day it'll
+ be useful. */
+ if (operand->flags & ARC_OPERAND_SIGNED)
+ {
+ minval = -(1 << (operand->bits - 1));
+ maxval = (1 << (operand->bits - 1)) - 1;
+ }
+ else
+ {
+ minval = 0;
+ maxval = (1 << operand->bits) - 1;
+ }
+ if ((cond_p && !limm_p) || (value < minval || value > maxval))
+ {
+ if (limm_p && value != limm)
+ *errmsg = _("too many long constants");
+
+ else
+ {
+ limm_p = 1;
+ limm = value;
+ if (operand->flags & ARC_OPERAND_STORE)
+ insn |= B(ARC_REG_LIMM);
+ if (operand->flags & ARC_OPERAND_LOAD)
+ insn |= C(ARC_REG_LIMM);
+ ls_operand[LS_OFFSET] = OP_LIMM;
+ }
+ }
+ else
+ {
+ if ((value < minval || value > maxval))
+ *errmsg = "need too many limms";
+ else if (shimm_p && value != shimm)
+ {
+ /* Check for bad operand combinations
+ before we lose info about them. */
+ if ((insn & I(-1)) == I(1))
+ {
+ *errmsg = _("too many shimms in load");
+ goto out;
+ }
+ if (limm_p && operand->flags & ARC_OPERAND_LOAD)
+ {
+ *errmsg = _("too many long constants");
+ goto out;
+ }
+ /* Convert what we thought was a shimm to a limm. */
+ limm_p = 1;
+ limm = shimm;
+ if (ls_operand[LS_VALUE] == OP_SHIMM
+ && operand->flags & ARC_OPERAND_STORE)
+ {
+ insn &= ~C(-1);
+ insn |= C(ARC_REG_LIMM);
+ ls_operand[LS_VALUE] = OP_LIMM;
+ }
+ if (ls_operand[LS_BASE] == OP_SHIMM
+ && operand->flags & ARC_OPERAND_STORE)
+ {
+ insn &= ~B(-1);
+ insn |= B(ARC_REG_LIMM);
+ ls_operand[LS_BASE] = OP_LIMM;
+ }
+ }
+ shimm = value;
+ shimm_p = 1;
+ ls_operand[LS_OFFSET] = OP_SHIMM;
+ }
+ }
+ out:
+ return insn;
+}
+
+/* Used in st insns to do final disasemble syntax check. */
+
+static long
+extract_st_syntax (arc_insn *insn,
+ const struct arc_operand *operand ATTRIBUTE_UNUSED,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value **opval ATTRIBUTE_UNUSED,
+ int *invalid)
+{
+#define ST_SYNTAX(V,B,O) \
+((ls_operand[LS_VALUE] == (V) && \
+ ls_operand[LS_BASE] == (B) && \
+ ls_operand[LS_OFFSET] == (O)))
+
+ if (!((ST_SYNTAX(OP_REG,OP_REG,OP_NONE) && (insn[0] & 511) == 0)
+ || ST_SYNTAX(OP_REG,OP_LIMM,OP_NONE)
+ || (ST_SYNTAX(OP_SHIMM,OP_REG,OP_NONE) && (insn[0] & 511) == 0)
+ || (ST_SYNTAX(OP_SHIMM,OP_SHIMM,OP_NONE) && (insn[0] & 511) == 0)
+ || ST_SYNTAX(OP_SHIMM,OP_LIMM,OP_NONE)
+ || ST_SYNTAX(OP_SHIMM,OP_LIMM,OP_SHIMM)
+ || ST_SYNTAX(OP_SHIMM,OP_SHIMM,OP_SHIMM)
+ || (ST_SYNTAX(OP_LIMM,OP_REG,OP_NONE) && (insn[0] & 511) == 0)
+ || ST_SYNTAX(OP_REG,OP_REG,OP_SHIMM)
+ || ST_SYNTAX(OP_REG,OP_SHIMM,OP_SHIMM)
+ || ST_SYNTAX(OP_SHIMM,OP_REG,OP_SHIMM)
+ || ST_SYNTAX(OP_LIMM,OP_SHIMM,OP_SHIMM)
+ || ST_SYNTAX(OP_LIMM,OP_SHIMM,OP_NONE)
+ || ST_SYNTAX(OP_LIMM,OP_REG,OP_SHIMM)))
+ *invalid = 1;
+ return 0;
+}
+
+int
+arc_limm_fixup_adjust (arc_insn insn)
+{
+ int retval = 0;
+
+ /* Check for st shimm,[limm]. */
+ if ((insn & (I(-1) | C(-1) | B(-1))) ==
+ (I(2) | C(ARC_REG_SHIMM) | B(ARC_REG_LIMM)))
+ {
+ retval = insn & 0x1ff;
+ if (retval & 0x100) /* Sign extend 9 bit offset. */
+ retval |= ~0x1ff;
+ }
+ return -retval; /* Negate offset for return. */
+}
+
+/* Used in st insns to do final syntax check. */
+
+static arc_insn
+insert_st_syntax (arc_insn insn,
+ const struct arc_operand *operand ATTRIBUTE_UNUSED,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg)
+{
+ if (ST_SYNTAX (OP_SHIMM,OP_REG,OP_NONE) && shimm != 0)
+ {
+ /* Change an illegal insn into a legal one, it's easier to
+ do it here than to try to handle it during operand scan. */
+ limm_p = 1;
+ limm = shimm;
+ shimm_p = 0;
+ shimm = 0;
+ insn = insn & ~(C(-1) | 511);
+ insn |= ARC_REG_LIMM << ARC_SHIFT_REGC;
+ ls_operand[LS_VALUE] = OP_LIMM;
+ }
+
+ if (ST_SYNTAX (OP_REG, OP_SHIMM, OP_NONE)
+ || ST_SYNTAX (OP_LIMM, OP_SHIMM, OP_NONE))
+ {
+ /* Try to salvage this syntax. */
+ if (shimm & 0x1) /* Odd shimms won't work. */
+ {
+ if (limm_p) /* Do we have a limm already? */
+ *errmsg = _("impossible store");
+
+ limm_p = 1;
+ limm = shimm;
+ shimm = 0;
+ shimm_p = 0;
+ insn = insn & ~(B(-1) | 511);
+ insn |= B(ARC_REG_LIMM);
+ ls_operand[LS_BASE] = OP_LIMM;
+ }
+ else
+ {
+ shimm >>= 1;
+ insn = insn & ~511;
+ insn |= shimm;
+ ls_operand[LS_OFFSET] = OP_SHIMM;
+ }
+ }
+ if (ST_SYNTAX(OP_SHIMM,OP_LIMM,OP_NONE))
+ limm += arc_limm_fixup_adjust(insn);
+
+ if (! (ST_SYNTAX (OP_REG,OP_REG,OP_NONE)
+ || ST_SYNTAX (OP_REG,OP_LIMM,OP_NONE)
+ || ST_SYNTAX (OP_REG,OP_REG,OP_SHIMM)
+ || ST_SYNTAX (OP_REG,OP_SHIMM,OP_SHIMM)
+ || (ST_SYNTAX (OP_SHIMM,OP_SHIMM,OP_NONE) && (shimm == 0))
+ || ST_SYNTAX (OP_SHIMM,OP_LIMM,OP_NONE)
+ || ST_SYNTAX (OP_SHIMM,OP_REG,OP_NONE)
+ || ST_SYNTAX (OP_SHIMM,OP_REG,OP_SHIMM)
+ || ST_SYNTAX (OP_SHIMM,OP_SHIMM,OP_SHIMM)
+ || ST_SYNTAX (OP_LIMM,OP_SHIMM,OP_SHIMM)
+ || ST_SYNTAX (OP_LIMM,OP_REG,OP_NONE)
+ || ST_SYNTAX (OP_LIMM,OP_REG,OP_SHIMM)))
+ *errmsg = _("st operand error");
+ if (addrwb_p)
+ {
+ if (ls_operand[LS_BASE] != OP_REG)
+ *errmsg = _("address writeback not allowed");
+ insn |= addrwb_p;
+ }
+ if (ST_SYNTAX(OP_SHIMM,OP_REG,OP_NONE) && shimm)
+ *errmsg = _("store value must be zero");
return insn;
}
-/* Used in ld/st insns when the shimm offset is 0. */
+/* Used in ld insns to do final syntax check. */
static arc_insn
-insert_shimmzero (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_ld_syntax (arc_insn insn,
+ const struct arc_operand *operand ATTRIBUTE_UNUSED,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg)
{
- shimm_p = 1;
- shimm = 0;
+#define LD_SYNTAX(D, B, O) \
+ ( (ls_operand[LS_DEST] == (D) \
+ && ls_operand[LS_BASE] == (B) \
+ && ls_operand[LS_OFFSET] == (O)))
+
+ int test = insn & I (-1);
+
+ if (!(test == I (1)))
+ {
+ if ((ls_operand[LS_DEST] == OP_SHIMM || ls_operand[LS_BASE] == OP_SHIMM
+ || ls_operand[LS_OFFSET] == OP_SHIMM))
+ *errmsg = _("invalid load/shimm insn");
+ }
+ if (!(LD_SYNTAX(OP_REG,OP_REG,OP_NONE)
+ || LD_SYNTAX(OP_REG,OP_REG,OP_REG)
+ || LD_SYNTAX(OP_REG,OP_REG,OP_SHIMM)
+ || (LD_SYNTAX(OP_REG,OP_LIMM,OP_REG) && !(test == I(1)))
+ || (LD_SYNTAX(OP_REG,OP_REG,OP_LIMM) && !(test == I(1)))
+ || LD_SYNTAX(OP_REG,OP_SHIMM,OP_SHIMM)
+ || (LD_SYNTAX(OP_REG,OP_LIMM,OP_NONE) && (test == I(1)))))
+ *errmsg = _("ld operand error");
+ if (addrwb_p)
+ {
+ if (ls_operand[LS_BASE] != OP_REG)
+ *errmsg = _("address writeback not allowed");
+ insn |= addrwb_p;
+ }
return insn;
}
+/* Used in ld insns to do final syntax check. */
+
+static long
+extract_ld_syntax (arc_insn *insn,
+ const struct arc_operand *operand ATTRIBUTE_UNUSED,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value **opval ATTRIBUTE_UNUSED,
+ int *invalid)
+{
+ int test = insn[0] & I(-1);
+
+ if (!(test == I(1)))
+ {
+ if ((ls_operand[LS_DEST] == OP_SHIMM || ls_operand[LS_BASE] == OP_SHIMM
+ || ls_operand[LS_OFFSET] == OP_SHIMM))
+ *invalid = 1;
+ }
+ if (!( (LD_SYNTAX (OP_REG, OP_REG, OP_NONE) && (test == I(1)))
+ || LD_SYNTAX (OP_REG, OP_REG, OP_REG)
+ || LD_SYNTAX (OP_REG, OP_REG, OP_SHIMM)
+ || (LD_SYNTAX (OP_REG, OP_REG, OP_LIMM) && !(test == I(1)))
+ || (LD_SYNTAX (OP_REG, OP_LIMM, OP_REG) && !(test == I(1)))
+ || (LD_SYNTAX (OP_REG, OP_SHIMM, OP_NONE) && (shimm == 0))
+ || LD_SYNTAX (OP_REG, OP_SHIMM, OP_SHIMM)
+ || (LD_SYNTAX (OP_REG, OP_LIMM, OP_NONE) && (test == I(1)))))
+ *invalid = 1;
+ return 0;
+}
+
/* Called at the end of processing normal insns (eg: add) to insert a shimm
value (if present) into the insn. */
static arc_insn
-insert_shimmfinish (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_shimmfinish (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg ATTRIBUTE_UNUSED)
{
if (shimm_p)
insn |= (shimm & ((1 << operand->bits) - 1)) << operand->shift;
}
/* Called at the end of processing normal insns (eg: add) to insert a limm
- value (if present) into the insn. Actually, there's nothing for us to do
- as we can't call frag_more, the caller must do that. */
-/* ??? The extract fns take a pointer to two words. The insert insns could be
- converted and then we could do something useful. Not sure it's worth it. */
+ value (if present) into the insn.
+
+ Note that this function is only intended to handle instructions (with 4 byte
+ immediate operands). It is not intended to handle data. */
+
+/* ??? Actually, there's nothing for us to do as we can't call frag_more, the
+ caller must do that. The extract fns take a pointer to two words. The
+ insert fns could be converted and then we could do something useful, but
+ then the reloc handlers would have to know to work on the second word of
+ a 2 word quantity. That's too much so we don't handle them. */
static arc_insn
-insert_limmfinish (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_limmfinish (arc_insn insn,
+ const struct arc_operand *operand ATTRIBUTE_UNUSED,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg ATTRIBUTE_UNUSED)
{
- if (limm_p)
- ; /* nothing to do */
+ return insn;
+}
+
+static arc_insn
+insert_jumpflags (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value,
+ const char **errmsg)
+{
+ if (!flag_p)
+ *errmsg = _("jump flags, but no .f seen");
+
+ else if (!limm_p)
+ *errmsg = _("jump flags, but no limm addr");
+
+ else if (limm & 0xfc000000)
+ *errmsg = _("flag bits of jump address limm lost");
+
+ else if (limm & 0x03000000)
+ *errmsg = _("attempt to set HR bits");
+
+ else if ((value & ((1 << operand->bits) - 1)) != value)
+ *errmsg = _("bad jump flags value");
+
+ jumpflags_p = 1;
+ limm = ((limm & ((1 << operand->shift) - 1))
+ | ((value & ((1 << operand->bits) - 1)) << operand->shift));
return insn;
}
/* Called at the end of unary operand macros to copy the B field to C. */
static arc_insn
-insert_unopmacro (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_unopmacro (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg ATTRIBUTE_UNUSED)
{
insn |= ((insn >> ARC_SHIFT_REGB) & ARC_MASK_REG) << operand->shift;
return insn;
/* Insert a relative address for a branch insn (b, bl, or lp). */
static arc_insn
-insert_reladdr (insn, operand, mods, reg, value, errmsg)
- arc_insn insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value *reg;
- long value;
- const char **errmsg;
+insert_reladdr (arc_insn insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value,
+ const char **errmsg)
{
if (value & 3)
- *errmsg = "branch address not on 4 byte boundary";
+ *errmsg = _("branch address not on 4 byte boundary");
insn |= ((value >> 2) & ((1 << operand->bits) - 1)) << operand->shift;
return insn;
}
+
+/* Insert a limm value as a 26 bit address right shifted 2 into the insn.
+
+ Note that this function is only intended to handle instructions (with 4 byte
+ immediate operands). It is not intended to handle data. */
+
+/* ??? Actually, there's little for us to do as we can't call frag_more, the
+ caller must do that. The extract fns take a pointer to two words. The
+ insert fns could be converted and then we could do something useful, but
+ then the reloc handlers would have to know to work on the second word of
+ a 2 word quantity. That's too much so we don't handle them.
+
+ We do check for correct usage of the nullify suffix, or we
+ set the default correctly, though. */
+
+static arc_insn
+insert_absaddr (arc_insn insn,
+ const struct arc_operand *operand ATTRIBUTE_UNUSED,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value *reg ATTRIBUTE_UNUSED,
+ long value ATTRIBUTE_UNUSED,
+ const char **errmsg)
+{
+ if (limm_p)
+ {
+ /* If it is a jump and link, .jd must be specified. */
+ if (insn & R (-1, 9, 1))
+ {
+ if (!nullify_p)
+ insn |= 0x02 << 5; /* Default nullify to .jd. */
+
+ else if (nullify != 0x02)
+ *errmsg = _("must specify .jd or no nullify suffix");
+ }
+ }
+ return insn;
+}
\f
/* Extraction functions.
a suffix table entry for the "false" case, so values of zero must be
obtained from the return value (*OPVAL == NULL). */
-static const struct arc_operand_value *lookup_register (int type, long regno);
-
/* Called by the disassembler before printing an instruction. */
void
-arc_opcode_init_extract ()
+arc_opcode_init_extract (void)
{
- flag_p = 0;
- flagshimm_handled_p = 0;
- shimm_p = 0;
- limm_p = 0;
+ arc_opcode_init_insert ();
+}
+
+static const struct arc_operand_value *
+lookup_register (int type, long regno)
+{
+ const struct arc_operand_value *r,*end;
+ struct arc_ext_operand_value *ext_oper = arc_ext_operands;
+
+ while (ext_oper)
+ {
+ if (ext_oper->operand.type == type && ext_oper->operand.value == regno)
+ return (&ext_oper->operand);
+ ext_oper = ext_oper->next;
+ }
+
+ if (type == REG)
+ return &arc_reg_names[regno];
+
+ /* ??? This is a little slow and can be speeded up. */
+ for (r = arc_reg_names, end = arc_reg_names + arc_reg_names_count;
+ r < end; ++r)
+ if (type == r->type && regno == r->value)
+ return r;
+ return 0;
}
/* As we're extracting registers, keep an eye out for the 'f' indicator
constants with special names. */
static long
-extract_reg (insn, operand, mods, opval, invalid)
- arc_insn *insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value **opval;
- int *invalid;
+extract_reg (arc_insn *insn,
+ const struct arc_operand *operand,
+ int mods,
+ const struct arc_operand_value **opval,
+ int *invalid ATTRIBUTE_UNUSED)
{
int regno;
long value;
+ enum operand op_type;
/* Get the register number. */
- regno = (insn[0] >> operand->shift) & ((1 << operand->bits) - 1);
+ regno = (*insn >> operand->shift) & ((1 << operand->bits) - 1);
/* Is it a constant marker? */
if (regno == ARC_REG_SHIMM)
{
- value = insn[0] & 511;
- if ((operand->flags & ARC_OPERAND_SIGNED)
- && (value & 256))
- value -= 512;
- flagshimm_handled_p = 1;
+ op_type = OP_SHIMM;
+ /* Always return zero if dest is a shimm mlm. */
+
+ if ('a' != operand->fmt)
+ {
+ value = *insn & 511;
+ if ((operand->flags & ARC_OPERAND_SIGNED)
+ && (value & 256))
+ value -= 512;
+ if (!flagshimm_handled_p)
+ flag_p = 0;
+ flagshimm_handled_p = 1;
+ }
+ else
+ value = 0;
}
else if (regno == ARC_REG_SHIMM_UPDATE)
{
- value = insn[0] & 511;
- if ((operand->flags & ARC_OPERAND_SIGNED)
- && (value & 256))
- value -= 512;
+ op_type = OP_SHIMM;
+
+ /* Always return zero if dest is a shimm mlm. */
+ if ('a' != operand->fmt)
+ {
+ value = *insn & 511;
+ if ((operand->flags & ARC_OPERAND_SIGNED) && (value & 256))
+ value -= 512;
+ }
+ else
+ value = 0;
+
flag_p = 1;
flagshimm_handled_p = 1;
}
else if (regno == ARC_REG_LIMM)
{
+ op_type = OP_LIMM;
value = insn[1];
limm_p = 1;
+
+ /* If this is a jump instruction (j,jl), show new pc correctly. */
+ if (0x07 == ((*insn & I(-1)) >> 27))
+ value = (value & 0xffffff);
}
+
/* It's a register, set OPVAL (that's the only way we distinguish registers
from constants here). */
else
{
const struct arc_operand_value *reg = lookup_register (REG, regno);
- if (!reg)
+ op_type = OP_REG;
+
+ if (reg == NULL)
abort ();
- if (opval)
+ if (opval != NULL)
*opval = reg;
value = regno;
}
/* This is really a constant, but tell the caller it has a special
name. */
- if (reg && opval)
+ if (reg != NULL && opval != NULL)
*opval = reg;
}
+ switch(operand->fmt)
+ {
+ case 'a':
+ ls_operand[LS_DEST] = op_type;
+ break;
+ case 's':
+ ls_operand[LS_BASE] = op_type;
+ break;
+ case 'c':
+ if ((insn[0]& I(-1)) == I(2))
+ ls_operand[LS_VALUE] = op_type;
+ else
+ ls_operand[LS_OFFSET] = op_type;
+ break;
+ case 'o': case 'O':
+ ls_operand[LS_OFFSET] = op_type;
+ break;
+ }
+
return value;
}
This value is actually stored in the register field. */
static long
-extract_flag (insn, operand, mods, opval, invalid)
- arc_insn *insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value **opval;
- int *invalid;
+extract_flag (arc_insn *insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value **opval,
+ int *invalid ATTRIBUTE_UNUSED)
{
int f;
const struct arc_operand_value *val;
if (flagshimm_handled_p)
f = flag_p != 0;
else
- f = (insn[0] & (1 << operand->shift)) != 0;
+ f = (*insn & (1 << operand->shift)) != 0;
/* There is no text for zero values. */
if (f == 0)
return 0;
-
+ flag_p = 1;
val = arc_opcode_lookup_suffix (operand, 1);
- if (opval && val)
+ if (opval != NULL && val != NULL)
*opval = val;
return val->value;
}
zero. */
static long
-extract_cond (insn, operand, mods, opval, invalid)
- arc_insn *insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value **opval;
- int *invalid;
+extract_cond (arc_insn *insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value **opval,
+ int *invalid ATTRIBUTE_UNUSED)
{
long cond;
const struct arc_operand_value *val;
if (flagshimm_handled_p)
return 0;
- cond = (insn[0] >> operand->shift) & ((1 << operand->bits) - 1);
+ cond = (*insn >> operand->shift) & ((1 << operand->bits) - 1);
val = arc_opcode_lookup_suffix (operand, cond);
- /* Ignore NULL values of `val'. Several condition code values aren't
- implemented yet. */
- if (opval && val)
+ /* Ignore NULL values of `val'. Several condition code values are
+ reserved for extensions. */
+ if (opval != NULL && val != NULL)
*opval = val;
return cond;
}
We return the value as a real address (not right shifted by 2). */
static long
-extract_reladdr (insn, operand, mods, opval, invalid)
- arc_insn *insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value **opval;
- int *invalid;
+extract_reladdr (arc_insn *insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value **opval ATTRIBUTE_UNUSED,
+ int *invalid ATTRIBUTE_UNUSED)
{
long addr;
- addr = (insn[0] >> operand->shift) & ((1 << operand->bits) - 1);
+ addr = (*insn >> operand->shift) & ((1 << operand->bits) - 1);
if ((operand->flags & ARC_OPERAND_SIGNED)
&& (addr & (1 << (operand->bits - 1))))
addr -= 1 << operand->bits;
-
return addr << 2;
}
+/* Extract the flags bits from a j or jl long immediate. */
+
+static long
+extract_jumpflags (arc_insn *insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value **opval ATTRIBUTE_UNUSED,
+ int *invalid)
+{
+ if (!flag_p || !limm_p)
+ *invalid = 1;
+ return ((flag_p && limm_p)
+ ? (insn[1] >> operand->shift) & ((1 << operand->bits) -1): 0);
+}
+
+/* Extract st insn's offset. */
+
+static long
+extract_st_offset (arc_insn *insn,
+ const struct arc_operand *operand,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value **opval ATTRIBUTE_UNUSED,
+ int *invalid)
+{
+ int value = 0;
+
+ if (ls_operand[LS_VALUE] != OP_SHIMM || ls_operand[LS_BASE] != OP_LIMM)
+ {
+ value = insn[0] & 511;
+ if ((operand->flags & ARC_OPERAND_SIGNED) && (value & 256))
+ value -= 512;
+ if (value)
+ ls_operand[LS_OFFSET] = OP_SHIMM;
+ }
+ else
+ *invalid = 1;
+
+ return value;
+}
+
+/* Extract ld insn's offset. */
+
+static long
+extract_ld_offset (arc_insn *insn,
+ const struct arc_operand *operand,
+ int mods,
+ const struct arc_operand_value **opval,
+ int *invalid)
+{
+ int test = insn[0] & I(-1);
+ int value;
+
+ if (test)
+ {
+ value = insn[0] & 511;
+ if ((operand->flags & ARC_OPERAND_SIGNED) && (value & 256))
+ value -= 512;
+ if (value)
+ ls_operand[LS_OFFSET] = OP_SHIMM;
+
+ return value;
+ }
+ /* If it isn't in the insn, it's concealed behind reg 'c'. */
+ return extract_reg (insn, &arc_operands[arc_operand_map['c']],
+ mods, opval, invalid);
+}
+
/* The only thing this does is set the `invalid' flag if B != C.
This is needed because the "mov" macro appears before it's real insn "and"
and we don't want the disassembler to confuse them. */
static long
-extract_unopmacro (insn, operand, mods, opval, invalid)
- arc_insn *insn;
- const struct arc_operand *operand;
- int mods;
- const struct arc_operand_value **opval;
- int *invalid;
+extract_unopmacro (arc_insn *insn,
+ const struct arc_operand *operand ATTRIBUTE_UNUSED,
+ int mods ATTRIBUTE_UNUSED,
+ const struct arc_operand_value **opval ATTRIBUTE_UNUSED,
+ int *invalid)
{
- /* ??? This misses the case where B == ARC_REG_SHIMM_UPDATE &&
+ /* This misses the case where B == ARC_REG_SHIMM_UPDATE &&
C == ARC_REG_SHIMM (or vice versa). No big deal. Those insns will get
printed as "and"s. */
- if (((insn[0] >> ARC_SHIFT_REGB) & ARC_MASK_REG)
- != ((insn[0] >> ARC_SHIFT_REGC) & ARC_MASK_REG))
- if (invalid)
+ if (((*insn >> ARC_SHIFT_REGB) & ARC_MASK_REG)
+ != ((*insn >> ARC_SHIFT_REGC) & ARC_MASK_REG))
+ if (invalid != NULL)
*invalid = 1;
+ return 0;
+}
+\f
+/* ARC instructions.
+
+ Longer versions of insns must appear before shorter ones (if gas sees
+ "lsr r2,r3,1" when it's parsing "lsr %a,%b" it will think the ",1" is
+ junk). This isn't necessary for `ld' because of the trailing ']'.
+
+ Instructions that are really macros based on other insns must appear
+ before the real insn so they're chosen when disassembling. Eg: The `mov'
+ insn is really the `and' insn. */
+
+struct arc_opcode arc_opcodes[] =
+{
+ /* Base case instruction set (core versions 5-8). */
+
+ /* "mov" is really an "and". */
+ { "mov%.q%.f %a,%b%F%S%L%U", I(-1), I(12), ARC_MACH_5, 0, 0 },
+ /* "asl" is really an "add". */
+ { "asl%.q%.f %a,%b%F%S%L%U", I(-1), I(8), ARC_MACH_5, 0, 0 },
+ /* "lsl" is really an "add". */
+ { "lsl%.q%.f %a,%b%F%S%L%U", I(-1), I(8), ARC_MACH_5, 0, 0 },
+ /* "nop" is really an "xor". */
+ { "nop", 0x7fffffff, 0x7fffffff, ARC_MACH_5, 0, 0 },
+ /* "rlc" is really an "adc". */
+ { "rlc%.q%.f %a,%b%F%S%L%U", I(-1), I(9), ARC_MACH_5, 0, 0 },
+ { "adc%.q%.f %a,%b,%c%F%S%L", I(-1), I(9), ARC_MACH_5, 0, 0 },
+ { "add%.q%.f %a,%b,%c%F%S%L", I(-1), I(8), ARC_MACH_5, 0, 0 },
+ { "and%.q%.f %a,%b,%c%F%S%L", I(-1), I(12), ARC_MACH_5, 0, 0 },
+ { "asr%.q%.f %a,%b%F%S%L", I(-1)|C(-1), I(3)|C(1), ARC_MACH_5, 0, 0 },
+ { "bic%.q%.f %a,%b,%c%F%S%L", I(-1), I(14), ARC_MACH_5, 0, 0 },
+ { "b%q%.n %B", I(-1), I(4), ARC_MACH_5 | ARC_OPCODE_COND_BRANCH, 0, 0 },
+ { "bl%q%.n %B", I(-1), I(5), ARC_MACH_5 | ARC_OPCODE_COND_BRANCH, 0, 0 },
+ { "extb%.q%.f %a,%b%F%S%L", I(-1)|C(-1), I(3)|C(7), ARC_MACH_5, 0, 0 },
+ { "extw%.q%.f %a,%b%F%S%L", I(-1)|C(-1), I(3)|C(8), ARC_MACH_5, 0, 0 },
+ { "flag%.q %b%G%S%L", I(-1)|A(-1)|C(-1), I(3)|A(ARC_REG_SHIMM_UPDATE)|C(0), ARC_MACH_5, 0, 0 },
+ { "brk", 0x1ffffe00, 0x1ffffe00, ARC_MACH_7, 0, 0 },
+ { "sleep", 0x1ffffe01, 0x1ffffe01, ARC_MACH_7, 0, 0 },
+ { "swi", 0x1ffffe02, 0x1ffffe02, ARC_MACH_8, 0, 0 },
+ /* %Q: force cond_p=1 -> no shimm values. This insn allows an
+ optional flags spec. */
+ { "j%q%Q%.n%.f %b%F%J,%j", I(-1)|A(-1)|C(-1)|R(-1,7,1), I(7)|A(0)|C(0)|R(0,7,1), ARC_MACH_5 | ARC_OPCODE_COND_BRANCH, 0, 0 },
+ { "j%q%Q%.n%.f %b%F%J", I(-1)|A(-1)|C(-1)|R(-1,7,1), I(7)|A(0)|C(0)|R(0,7,1), ARC_MACH_5 | ARC_OPCODE_COND_BRANCH, 0, 0 },
+ /* This insn allows an optional flags spec. */
+ { "jl%q%Q%.n%.f %b%F%J,%j", I(-1)|A(-1)|C(-1)|R(-1,7,1)|R(-1,9,1), I(7)|A(0)|C(0)|R(0,7,1)|R(1,9,1), ARC_MACH_6 | ARC_OPCODE_COND_BRANCH, 0, 0 },
+ { "jl%q%Q%.n%.f %b%F%J", I(-1)|A(-1)|C(-1)|R(-1,7,1)|R(-1,9,1), I(7)|A(0)|C(0)|R(0,7,1)|R(1,9,1), ARC_MACH_6 | ARC_OPCODE_COND_BRANCH, 0, 0 },
+ /* Put opcode 1 ld insns first so shimm gets prefered over limm.
+ "[%b]" is before "[%b,%o]" so 0 offsets don't get printed. */
+ { "ld%Z%.X%.W%.E %a,[%s]%S%L%1", I(-1)|R(-1,13,1)|R(-1,0,511), I(1)|R(0,13,1)|R(0,0,511), ARC_MACH_5, 0, 0 },
+ { "ld%z%.x%.w%.e %a,[%s]%S%L%1", I(-1)|R(-1,4,1)|R(-1,6,7), I(0)|R(0,4,1)|R(0,6,7), ARC_MACH_5, 0, 0 },
+ { "ld%z%.x%.w%.e %a,[%s,%O]%S%L%1", I(-1)|R(-1,4,1)|R(-1,6,7), I(0)|R(0,4,1)|R(0,6,7), ARC_MACH_5, 0, 0 },
+ { "ld%Z%.X%.W%.E %a,[%s,%O]%S%L%3", I(-1)|R(-1,13,1), I(1)|R(0,13,1), ARC_MACH_5, 0, 0 },
+ { "lp%q%.n %B", I(-1), I(6), ARC_MACH_5, 0, 0 },
+ { "lr %a,[%Ab]%S%L", I(-1)|C(-1), I(1)|C(0x10), ARC_MACH_5, 0, 0 },
+ { "lsr%.q%.f %a,%b%F%S%L", I(-1)|C(-1), I(3)|C(2), ARC_MACH_5, 0, 0 },
+ { "or%.q%.f %a,%b,%c%F%S%L", I(-1), I(13), ARC_MACH_5, 0, 0 },
+ { "ror%.q%.f %a,%b%F%S%L", I(-1)|C(-1), I(3)|C(3), ARC_MACH_5, 0, 0 },
+ { "rrc%.q%.f %a,%b%F%S%L", I(-1)|C(-1), I(3)|C(4), ARC_MACH_5, 0, 0 },
+ { "sbc%.q%.f %a,%b,%c%F%S%L", I(-1), I(11), ARC_MACH_5, 0, 0 },
+ { "sexb%.q%.f %a,%b%F%S%L", I(-1)|C(-1), I(3)|C(5), ARC_MACH_5, 0, 0 },
+ { "sexw%.q%.f %a,%b%F%S%L", I(-1)|C(-1), I(3)|C(6), ARC_MACH_5, 0, 0 },
+ { "sr %c,[%Ab]%S%L", I(-1)|A(-1), I(2)|A(0x10), ARC_MACH_5, 0, 0 },
+ /* "[%b]" is before "[%b,%o]" so 0 offsets don't get printed. */
+ { "st%y%.v%.D %c,[%s]%L%S%0", I(-1)|R(-1,25,1)|R(-1,21,1), I(2)|R(0,25,1)|R(0,21,1), ARC_MACH_5, 0, 0 },
+ { "st%y%.v%.D %c,[%s,%o]%S%L%2", I(-1)|R(-1,25,1)|R(-1,21,1), I(2)|R(0,25,1)|R(0,21,1), ARC_MACH_5, 0, 0 },
+ { "sub%.q%.f %a,%b,%c%F%S%L", I(-1), I(10), ARC_MACH_5, 0, 0 },
+ { "xor%.q%.f %a,%b,%c%F%S%L", I(-1), I(15), ARC_MACH_5, 0, 0 }
+};
+
+const int arc_opcodes_count = sizeof (arc_opcodes) / sizeof (arc_opcodes[0]);
+
+const struct arc_operand_value arc_reg_names[] =
+{
+ /* Core register set r0-r63. */
+
+ /* r0-r28 - general purpose registers. */
+ { "r0", 0, REG, 0 }, { "r1", 1, REG, 0 }, { "r2", 2, REG, 0 },
+ { "r3", 3, REG, 0 }, { "r4", 4, REG, 0 }, { "r5", 5, REG, 0 },
+ { "r6", 6, REG, 0 }, { "r7", 7, REG, 0 }, { "r8", 8, REG, 0 },
+ { "r9", 9, REG, 0 }, { "r10", 10, REG, 0 }, { "r11", 11, REG, 0 },
+ { "r12", 12, REG, 0 }, { "r13", 13, REG, 0 }, { "r14", 14, REG, 0 },
+ { "r15", 15, REG, 0 }, { "r16", 16, REG, 0 }, { "r17", 17, REG, 0 },
+ { "r18", 18, REG, 0 }, { "r19", 19, REG, 0 }, { "r20", 20, REG, 0 },
+ { "r21", 21, REG, 0 }, { "r22", 22, REG, 0 }, { "r23", 23, REG, 0 },
+ { "r24", 24, REG, 0 }, { "r25", 25, REG, 0 }, { "r26", 26, REG, 0 },
+ { "r27", 27, REG, 0 }, { "r28", 28, REG, 0 },
+ /* Maskable interrupt link register. */
+ { "ilink1", 29, REG, 0 },
+ /* Maskable interrupt link register. */
+ { "ilink2", 30, REG, 0 },
+ /* Branch-link register. */
+ { "blink", 31, REG, 0 },
+
+ /* r32-r59 reserved for extensions. */
+ { "r32", 32, REG, 0 }, { "r33", 33, REG, 0 }, { "r34", 34, REG, 0 },
+ { "r35", 35, REG, 0 }, { "r36", 36, REG, 0 }, { "r37", 37, REG, 0 },
+ { "r38", 38, REG, 0 }, { "r39", 39, REG, 0 }, { "r40", 40, REG, 0 },
+ { "r41", 41, REG, 0 }, { "r42", 42, REG, 0 }, { "r43", 43, REG, 0 },
+ { "r44", 44, REG, 0 }, { "r45", 45, REG, 0 }, { "r46", 46, REG, 0 },
+ { "r47", 47, REG, 0 }, { "r48", 48, REG, 0 }, { "r49", 49, REG, 0 },
+ { "r50", 50, REG, 0 }, { "r51", 51, REG, 0 }, { "r52", 52, REG, 0 },
+ { "r53", 53, REG, 0 }, { "r54", 54, REG, 0 }, { "r55", 55, REG, 0 },
+ { "r56", 56, REG, 0 }, { "r57", 57, REG, 0 }, { "r58", 58, REG, 0 },
+ { "r59", 59, REG, 0 },
+
+ /* Loop count register (24 bits). */
+ { "lp_count", 60, REG, 0 },
+ /* Short immediate data indicator setting flags. */
+ { "r61", 61, REG, ARC_REGISTER_READONLY },
+ /* Long immediate data indicator setting flags. */
+ { "r62", 62, REG, ARC_REGISTER_READONLY },
+ /* Short immediate data indicator not setting flags. */
+ { "r63", 63, REG, ARC_REGISTER_READONLY },
+
+ /* Small-data base register. */
+ { "gp", 26, REG, 0 },
+ /* Frame pointer. */
+ { "fp", 27, REG, 0 },
+ /* Stack pointer. */
+ { "sp", 28, REG, 0 },
+
+ { "r29", 29, REG, 0 },
+ { "r30", 30, REG, 0 },
+ { "r31", 31, REG, 0 },
+ { "r60", 60, REG, 0 },
+
+ /* Auxiliary register set. */
+
+ /* Auxiliary register address map:
+ 0xffffffff-0xffffff00 (-1..-256) - customer shimm allocation
+ 0xfffffeff-0x80000000 - customer limm allocation
+ 0x7fffffff-0x00000100 - ARC limm allocation
+ 0x000000ff-0x00000000 - ARC shimm allocation */
+
+ /* Base case auxiliary registers (shimm address). */
+ { "status", 0x00, AUXREG, 0 },
+ { "semaphore", 0x01, AUXREG, 0 },
+ { "lp_start", 0x02, AUXREG, 0 },
+ { "lp_end", 0x03, AUXREG, 0 },
+ { "identity", 0x04, AUXREG, ARC_REGISTER_READONLY },
+ { "debug", 0x05, AUXREG, 0 },
+};
+const int arc_reg_names_count =
+ sizeof (arc_reg_names) / sizeof (arc_reg_names[0]);
+
+/* The suffix table.
+ Operands with the same name must be stored together. */
+
+const struct arc_operand_value arc_suffixes[] =
+{
+ /* Entry 0 is special, default values aren't printed by the disassembler. */
+ { "", 0, -1, 0 },
+
+ /* Base case condition codes. */
+ { "al", 0, COND, 0 },
+ { "ra", 0, COND, 0 },
+ { "eq", 1, COND, 0 },
+ { "z", 1, COND, 0 },
+ { "ne", 2, COND, 0 },
+ { "nz", 2, COND, 0 },
+ { "pl", 3, COND, 0 },
+ { "p", 3, COND, 0 },
+ { "mi", 4, COND, 0 },
+ { "n", 4, COND, 0 },
+ { "cs", 5, COND, 0 },
+ { "c", 5, COND, 0 },
+ { "lo", 5, COND, 0 },
+ { "cc", 6, COND, 0 },
+ { "nc", 6, COND, 0 },
+ { "hs", 6, COND, 0 },
+ { "vs", 7, COND, 0 },
+ { "v", 7, COND, 0 },
+ { "vc", 8, COND, 0 },
+ { "nv", 8, COND, 0 },
+ { "gt", 9, COND, 0 },
+ { "ge", 10, COND, 0 },
+ { "lt", 11, COND, 0 },
+ { "le", 12, COND, 0 },
+ { "hi", 13, COND, 0 },
+ { "ls", 14, COND, 0 },
+ { "pnz", 15, COND, 0 },
+
+ /* Condition codes 16-31 reserved for extensions. */
+
+ { "f", 1, FLAG, 0 },
+
+ { "nd", ARC_DELAY_NONE, DELAY, 0 },
+ { "d", ARC_DELAY_NORMAL, DELAY, 0 },
+ { "jd", ARC_DELAY_JUMP, DELAY, 0 },
+
+ { "b", 1, SIZE1, 0 },
+ { "b", 1, SIZE10, 0 },
+ { "b", 1, SIZE22, 0 },
+ { "w", 2, SIZE1, 0 },
+ { "w", 2, SIZE10, 0 },
+ { "w", 2, SIZE22, 0 },
+ { "x", 1, SIGN0, 0 },
+ { "x", 1, SIGN9, 0 },
+ { "a", 1, ADDRESS3, 0 },
+ { "a", 1, ADDRESS12, 0 },
+ { "a", 1, ADDRESS24, 0 },
+
+ { "di", 1, CACHEBYPASS5, 0 },
+ { "di", 1, CACHEBYPASS14, 0 },
+ { "di", 1, CACHEBYPASS26, 0 },
+};
+
+const int arc_suffixes_count =
+ sizeof (arc_suffixes) / sizeof (arc_suffixes[0]);
+
+/* Indexed by first letter of opcode. Points to chain of opcodes with same
+ first letter. */
+static struct arc_opcode *opcode_map[26 + 1];
+
+/* Indexed by insn code. Points to chain of opcodes with same insn code. */
+static struct arc_opcode *icode_map[32];
+\f
+/* Configuration flags. */
+
+/* Various ARC_HAVE_XXX bits. */
+static int cpu_type;
+
+/* Translate a bfd_mach_arc_xxx value to a ARC_MACH_XXX value. */
+
+int
+arc_get_opcode_mach (int bfd_mach, int big_p)
+{
+ static int mach_type_map[] =
+ {
+ ARC_MACH_5,
+ ARC_MACH_6,
+ ARC_MACH_7,
+ ARC_MACH_8
+ };
+ return mach_type_map[bfd_mach - bfd_mach_arc_5] | (big_p ? ARC_MACH_BIG : 0);
+}
+
+/* Initialize any tables that need it.
+ Must be called once at start up (or when first needed).
+
+ FLAGS is a set of bits that say what version of the cpu we have,
+ and in particular at least (one of) ARC_MACH_XXX. */
+
+void
+arc_opcode_init_tables (int flags)
+{
+ static int init_p = 0;
+
+ cpu_type = flags;
+
+ /* We may be intentionally called more than once (for example gdb will call
+ us each time the user switches cpu). These tables only need to be init'd
+ once though. */
+ if (!init_p)
+ {
+ int i,n;
+
+ memset (arc_operand_map, 0, sizeof (arc_operand_map));
+ n = sizeof (arc_operands) / sizeof (arc_operands[0]);
+ for (i = 0; i < n; ++i)
+ arc_operand_map[arc_operands[i].fmt] = i;
+
+ memset (opcode_map, 0, sizeof (opcode_map));
+ memset (icode_map, 0, sizeof (icode_map));
+ /* Scan the table backwards so macros appear at the front. */
+ for (i = arc_opcodes_count - 1; i >= 0; --i)
+ {
+ int opcode_hash = ARC_HASH_OPCODE (arc_opcodes[i].syntax);
+ int icode_hash = ARC_HASH_ICODE (arc_opcodes[i].value);
+
+ arc_opcodes[i].next_asm = opcode_map[opcode_hash];
+ opcode_map[opcode_hash] = &arc_opcodes[i];
+
+ arc_opcodes[i].next_dis = icode_map[icode_hash];
+ icode_map[icode_hash] = &arc_opcodes[i];
+ }
+
+ init_p = 1;
+ }
+}
+
+/* Return non-zero if OPCODE is supported on the specified cpu.
+ Cpu selection is made when calling `arc_opcode_init_tables'. */
+
+int
+arc_opcode_supported (const struct arc_opcode *opcode)
+{
+ if (ARC_OPCODE_CPU (opcode->flags) <= cpu_type)
+ return 1;
return 0;
}
+/* Return the first insn in the chain for assembling INSN. */
+
+const struct arc_opcode *
+arc_opcode_lookup_asm (const char *insn)
+{
+ return opcode_map[ARC_HASH_OPCODE (insn)];
+}
+
+/* Return the first insn in the chain for disassembling INSN. */
+
+const struct arc_opcode *
+arc_opcode_lookup_dis (unsigned int insn)
+{
+ return icode_map[ARC_HASH_ICODE (insn)];
+}
+
+/* Called by the assembler before parsing an instruction. */
+
+void
+arc_opcode_init_insert (void)
+{
+ int i;
+
+ for(i = 0; i < OPERANDS; i++)
+ ls_operand[i] = OP_NONE;
+
+ flag_p = 0;
+ flagshimm_handled_p = 0;
+ cond_p = 0;
+ addrwb_p = 0;
+ shimm_p = 0;
+ limm_p = 0;
+ jumpflags_p = 0;
+ nullify_p = 0;
+ nullify = 0; /* The default is important. */
+}
+
+/* Called by the assembler to see if the insn has a limm operand.
+ Also called by the disassembler to see if the insn contains a limm. */
+
+int
+arc_opcode_limm_p (long *limmp)
+{
+ if (limmp)
+ *limmp = limm;
+ return limm_p;
+}
+
/* Utility for the extraction functions to return the index into
`arc_suffixes'. */
const struct arc_operand_value *
-arc_opcode_lookup_suffix (type, value)
- const struct arc_operand *type;
- int value;
+arc_opcode_lookup_suffix (const struct arc_operand *type, int value)
{
- register const struct arc_operand_value *v,*end;
+ const struct arc_operand_value *v,*end;
+ struct arc_ext_operand_value *ext_oper = arc_ext_operands;
- /* ??? This is a little slow and can be speeded up. */
+ while (ext_oper)
+ {
+ if (type == &arc_operands[ext_oper->operand.type]
+ && value == ext_oper->operand.value)
+ return (&ext_oper->operand);
+ ext_oper = ext_oper->next;
+ }
+ /* ??? This is a little slow and can be speeded up. */
for (v = arc_suffixes, end = arc_suffixes + arc_suffixes_count; v < end; ++v)
if (type == &arc_operands[v->type]
&& value == v->value)
return 0;
}
-static const struct arc_operand_value *
-lookup_register (type, regno)
- int type;
- long regno;
+int
+arc_insn_is_j (arc_insn insn)
{
- register const struct arc_operand_value *r,*end;
+ return (insn & (I(-1))) == I(0x7);
+}
- if (type == REG)
- return &arc_reg_names[regno];
+int
+arc_insn_not_jl (arc_insn insn)
+{
+ return ((insn & (I(-1)|A(-1)|C(-1)|R(-1,7,1)|R(-1,9,1)))
+ != (I(0x7) | R(-1,9,1)));
+}
- /* ??? This is a little slow and can be speeded up. */
+int
+arc_operand_type (int opertype)
+{
+ switch (opertype)
+ {
+ case 0:
+ return COND;
+ break;
+ case 1:
+ return REG;
+ break;
+ case 2:
+ return AUXREG;
+ break;
+ }
+ return -1;
+}
- for (r = arc_reg_names, end = arc_reg_names + arc_reg_names_count;
- r < end; ++r)
- if (type == r->type && regno == r->value)
- return r;
- return 0;
+struct arc_operand_value *
+get_ext_suffix (char *s)
+{
+ struct arc_ext_operand_value *suffix = arc_ext_operands;
+
+ while (suffix)
+ {
+ if ((COND == suffix->operand.type)
+ && !strcmp(s,suffix->operand.name))
+ return(&suffix->operand);
+ suffix = suffix->next;
+ }
+ return NULL;
+}
+
+int
+arc_get_noshortcut_flag (void)
+{
+ return ARC_REGISTER_NOSHORT_CUT;
}