-# This file is a shell script that supplies the information necessary
-# to tailor a template configure script into the configure script
-# appropriate for this directory. For more information, check any
-# existing configure script.
+dnl Process this file with autoconf to produce a configure script.
+dnl
-srctrigger=z8k-dis.c
-srcname="opcodes"
+AC_PREREQ(2.13)
+AC_INIT(z8k-dis.c)
-# per-host:
+AC_CANONICAL_SYSTEM
+AC_ISC_POSIX
-. ${srcdir}/../bfd/configure.host
+# We currently only use the version number for the name of any shared
+# library. For user convenience, we always use the same version
+# number that BFD is using.
+changequote(,)dnl
+BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
+changequote([,])dnl
+
+AM_INIT_AUTOMAKE(opcodes, ${BFD_VERSION})
+
+dnl These must be called before AM_PROG_LIBTOOL, because it may want
+dnl to call AC_CHECK_PROG.
+AC_CHECK_TOOL(AR, ar)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+
+dnl Default to a non shared library. This may be overridden by the
+dnl configure option --enable-shared.
+AM_DISABLE_SHARED
+
+AM_PROG_LIBTOOL
-# Set up to make a link between the host's include file and "sysdep.h".
-files="../bfd/hosts/${my_host}.h"
-links="sysdep.h"
+AC_ARG_ENABLE(targets,
+[ --enable-targets alternative target configurations],
+[case "${enableval}" in
+ yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac])dnl
+AC_ARG_ENABLE(commonbfdlib,
+[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
+[case "${enableval}" in
+ yes) commonbfdlib=true ;;
+ no) commonbfdlib=false ;;
+ *) AC_MSG_ERROR([bad value ${enableval} for opcodes commonbfdlib option]) ;;
+esac])dnl
-if [ ! -f ${srcdir}/${files} ] ; then
- files=../bfd/hosts/std-host.h
- echo "[${srcname} has no specific support for host ${host} -- using std-host]"
+build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
+AC_ARG_ENABLE(build-warnings,
+[ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
+[case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi])dnl
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
fi
+AC_SUBST(WARN_CFLAGS)
-host_makefile_frag=
-if [ -f ${srcdir}/../bfd/config/${my_host}.mh ] ; then
- host_makefile_frag=../bfd/config/${my_host}.mh
+AM_CONFIG_HEADER(config.h:config.in)
+
+if test -z "$target" ; then
+ AC_MSG_ERROR(Unrecognized target system type; please check config.sub.)
fi
-# per-target:
+AM_MAINTAINER_MODE
+AC_EXEEXT
+
+# host-specific stuff:
+
+AC_PROG_CC
+
+ALL_LINGUAS="fr sv tr es da de"
+CY_GNU_GETTEXT
+
+. ${srcdir}/../bfd/configure.host
+
+BFD_CC_FOR_BUILD
+
+AC_SUBST(HDEFINES)
+AC_PROG_INSTALL
+
+AC_CHECK_HEADERS(string.h strings.h stdlib.h)
+
+cgen_maint=no
+cgendir='$(srcdir)/../cgen'
+
+AC_ARG_ENABLE(cgen-maint,
+[ --enable-cgen-maint[=dir] build cgen generated files],
+[case "${enableval}" in
+ yes) cgen_maint=yes ;;
+ no) cgen_maint=no ;;
+ *)
+ # argument is cgen install directory (not implemented yet).
+ # Having a `share' directory might be more appropriate for the .scm,
+ # .cpu, etc. files.
+ cgen_maint=yes
+ cgendir=${cgen_maint}/lib/cgen
+ ;;
+esac])dnl
+AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} = xyes)
+AC_SUBST(cgendir)
+
+using_cgen=no
+
+# Horrible hacks to build DLLs on Windows.
+WIN32LDFLAGS=
+WIN32LIBADD=
+case "${host}" in
+*-*-cygwin*)
+ if test "$enable_shared" = "yes"; then
+ WIN32LDFLAGS="-no-undefined"
+ WIN32LIBADD="-L`pwd`/../bfd -lbfd -L`pwd`/../libiberty -liberty -L`pwd`/../intl -lintl -lcygwin"
+ fi
+ ;;
+esac
+AC_SUBST(WIN32LDFLAGS)
+AC_SUBST(WIN32LIBADD)
+
+# target-specific stuff:
# Canonicalize the secondary target names.
-if [ -n "$enable_targets" ]; then
+if test -n "$enable_targets" ; then
for targ in `echo $enable_targets | sed 's/,/ /g'`
do
- result=`$configsub $targ 2>/dev/null`
- if [ -n "$result" ]; then
+ result=`$ac_config_sub $targ 2>/dev/null`
+ if test -n "$result" ; then
canon_targets="$canon_targets $result"
else
# Allow targets that config.sub doesn't recognize, like "all".
fi
all_targets=false
-
+selarchs=
for targ in $target $canon_targets
do
- bfd_target=`${config_shell} $srcdir/../bfd/config.bfd $targ`
-
- if [ "x$bfd_target" = "xall" ]; then
+ if test "x$targ" = "xall" ; then
all_targets=true
else
- if [ ! -f ${srcdir}/../bfd/config/${bfd_target}.mt ] ; then
- echo '***' No file ${srcdir}/../bfd/config/${bfd_target}.mt 1>&2
- echo '***' opcodes does not support target ${bfd_target} 1>&2
- echo '***' Look in bfd/config.bfd for supported targets 1>&2
- exit 1
- fi
-
- if [ "x$targ" = "x$target" ]; then
- target_makefile_frag=${srcdir}/../bfd/config/${bfd_target}.mt
- else
- target_extra_frags="$target_extra_frags ${srcdir}/../bfd/config/${bfd_target}.mt"
- fi
+ . $srcdir/../bfd/config.bfd
+ selarchs="$selarchs $targ_archs"
fi
-done
+done
-# We don't do any links based on the target system, just makefile config.
-
-# post-target:
+# Utility var, documents generic cgen support files.
-rm -f Makefile.tmp Makefile.2
-mv Makefile Makefile.tmp
+cgen_files="cgen-opc.lo cgen-asm.lo cgen-dis.lo"
-if [ x${all_targets} = xfalse ]; then
-
- allfrags="$target_makefile_frag $target_extra_frags"
+# We don't do any links based on the target system, just makefile config.
- # The architectures in all the configured targets.
- SELECT_ARCHITECTURES=`sed -n '
- s/SELECT_ARCHITECTURES[ ]*=[ ]*//p
- ' $allfrags`
+if test x${all_targets} = xfalse ; then
# Target architecture .o files.
ta=
- for arch in $SELECT_ARCHITECTURES
+ for arch in $selarchs
do
ad=`echo $arch | sed -e s/bfd_//g -e s/_arch//g`
archdefs="$archdefs -DARCH_$ad"
case "$arch" in
- bfd_a29k_arch) ta="$ta a29k-dis.o" ;;
- bfd_alpha_arch) ta="$ta alpha-dis.o" ;;
- bfd_arm_arch) ta="$ta arm-dis.o" ;;
- bfd_h8300_arch) ta="$ta h8300-dis.o" ;;
- bfd_h8500_arch) ta="$ta h8500-dis.o" ;;
- bfd_hppa_arch) ta="$ta hppa-dis.o" ;;
- bfd_i386_arch) ta="$ta i386-dis.o" ;;
- bfd_i960_arch) ta="$ta i960-dis.o" ;;
- bfd_m68k_arch) ta="$ta m68k-dis.o" ;;
- bfd_m88k_arch) ta="$ta m88k-dis.o" ;;
- bfd_mips_arch) ta="$ta mips-dis.o mips-opc.o" ;;
- bfd_ns32k_arch) ta="$ta ns32k-dis.o" ;;
- bfd_powerpc_arch) ta="$ta ppc-dis.o ppc-opc.o" ;;
- bfd_rs6000_arch) ta="$ta ppc-dis.o ppc-opc.o" ;;
- bfd_sh_arch) ta="$ta sh-dis.o" ;;
-# start-sanitize-rce
- bfd_rce_arch) ta="$ta rce-dis.o" ;;
-# end-sanitize-rce
- bfd_sparc_arch) ta="$ta sparc-dis.o sparc-opc.o" ;;
- bfd_vax_arch) ;;
+ bfd_a29k_arch) ta="$ta a29k-dis.lo" ;;
+ bfd_alliant_arch) ;;
+ bfd_alpha_arch) ta="$ta alpha-dis.lo alpha-opc.lo" ;;
+ bfd_arc_arch) ta="$ta arc-dis.lo arc-opc.lo arc-ext.lo" ;;
+ bfd_arm_arch) ta="$ta arm-dis.lo" ;;
+ bfd_avr_arch) ta="$ta avr-dis.lo" ;;
+ bfd_convex_arch) ;;
+ bfd_cris_arch) ta="$ta cris-dis.lo cris-opc.lo" ;;
+ bfd_d10v_arch) ta="$ta d10v-dis.lo d10v-opc.lo" ;;
+ bfd_d30v_arch) ta="$ta d30v-dis.lo d30v-opc.lo" ;;
+ bfd_fr30_arch) ta="$ta fr30-asm.lo fr30-desc.lo fr30-dis.lo fr30-ibld.lo fr30-opc.lo" using_cgen=yes ;;
+ bfd_h8300_arch) ta="$ta h8300-dis.lo" ;;
+ bfd_h8500_arch) ta="$ta h8500-dis.lo" ;;
+ bfd_hppa_arch) ta="$ta hppa-dis.lo" ;;
+ bfd_i370_arch) ta="$ta i370-dis.lo i370-opc.lo" ;;
+ bfd_i386_arch) ta="$ta i386-dis.lo" ;;
+ bfd_i860_arch) ta="$ta i860-dis.lo" ;;
+ bfd_i960_arch) ta="$ta i960-dis.lo" ;;
+ bfd_ia64_arch) ta="$ta ia64-dis.lo ia64-opc.lo" ;;
+ bfd_m32r_arch) ta="$ta m32r-asm.lo m32r-desc.lo m32r-dis.lo m32r-ibld.lo m32r-opc.lo m32r-opinst.lo" using_cgen=yes ;;
+ bfd_m68hc11_arch) ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;;
+ bfd_m68hc12_arch) ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;;
+ bfd_m68k_arch) ta="$ta m68k-dis.lo m68k-opc.lo" ;;
+ bfd_m88k_arch) ta="$ta m88k-dis.lo" ;;
+ bfd_mcore_arch) ta="$ta mcore-dis.lo" ;;
+ bfd_mips_arch) ta="$ta mips-dis.lo mips-opc.lo mips16-opc.lo" ;;
+ bfd_mmix_arch) ta="$ta mmix-dis.lo mmix-opc.lo" ;;
+ bfd_mn10200_arch) ta="$ta m10200-dis.lo m10200-opc.lo" ;;
+ bfd_mn10300_arch) ta="$ta m10300-dis.lo m10300-opc.lo" ;;
+ bfd_ns32k_arch) ta="$ta ns32k-dis.lo" ;;
+ bfd_openrisc_arch) ta="$ta openrisc-asm.lo openrisc-desc.lo openrisc-dis.lo openrisc-ibld.lo openrisc-opc.lo" using_cgen=yes ;;
+ bfd_or32_arch) ta="$ta or32-dis.lo or32-opc.lo" using_cgen=yes ;;
+ bfd_pdp11_arch) ta="$ta pdp11-dis.lo pdp11-opc.lo" ;;
+ bfd_pj_arch) ta="$ta pj-dis.lo pj-opc.lo" ;;
+ bfd_powerpc_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;;
+ bfd_powerpc_64_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;;
+ bfd_pyramid_arch) ;;
+ bfd_romp_arch) ;;
+ bfd_rs6000_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;;
+ bfd_s390_arch) ta="$ta s390-dis.lo s390-opc.lo" ;;
+ bfd_sh_arch)
+ # We can't decide what we want just from the CPU family.
+ # We want SH5 support unless a specific version of sh is
+ # specified, as in sh3-elf, sh3b-linux-gnu, etc.
+ # Include it just for ELF targets, since the SH5 bfd:s are ELF only.
+ for t in $target $canon_targets; do
+ case $t in
+ all | sh64-* | sh-*-*elf* | shl-*-*elf* | sh-*-linux* | shl-*-linux*)
+ ta="$ta sh64-dis.lo sh64-opc.lo"
+ archdefs="$archdefs -DINCLUDE_SHMEDIA"
+ break;;
+ esac;
+ done
+ ta="$ta sh-dis.lo" ;;
+ bfd_sparc_arch) ta="$ta sparc-dis.lo sparc-opc.lo" ;;
+ bfd_tahoe_arch) ;;
+ bfd_tic30_arch) ta="$ta tic30-dis.lo" ;;
+ bfd_tic54x_arch) ta="$ta tic54x-dis.lo tic54x-opc.lo" ;;
+ bfd_tic80_arch) ta="$ta tic80-dis.lo tic80-opc.lo" ;;
+ bfd_v850_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
+ bfd_v850e_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
+ bfd_v850ea_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
+ bfd_vax_arch) ta="$ta vax-dis.lo" ;;
+ bfd_w65_arch) ta="$ta w65-dis.lo" ;;
bfd_we32k_arch) ;;
- bfd_z8k_arch) ta="$ta z8k-dis.o" ;;
+ bfd_xstormy16_arch) ta="$ta xstormy16-asm.lo xstormy16-desc.lo xstormy16-dis.lo xstormy16-ibld.lo xstormy16-opc.lo" using_cgen=yes ;;
+ bfd_z8k_arch) ta="$ta z8k-dis.lo" ;;
"") ;;
- *) echo "*** unknown target architecture $arch" 1>&2; exit 1 ;;
+ *) AC_MSG_ERROR(*** unknown target architecture $arch) ;;
esac
done
+ if test $using_cgen = yes ; then
+ ta="$ta $cgen_files"
+ fi
+
# Weed out duplicate .o files.
f=""
for i in $ta ; do
done
archdefs="$f"
- echo "ARCHDEFS = $archdefs" >> Makefile.2
- echo "BFD_MACHINES = $ta" >> Makefile.2
+ BFD_MACHINES="$ta"
else # all_targets is true
- echo 'ARCHDEFS = -DARCH_all' >> Makefile.2
- echo 'BFD_MACHINES = $(ALL_MACHINES)' >> Makefile.2
-fi # all_targets is true
+ archdefs=-DARCH_all
+ BFD_MACHINES='$(ALL_MACHINES)'
+fi
+
+AC_SUBST(archdefs)
+AC_SUBST(BFD_MACHINES)
-cat Makefile.tmp >> Makefile.2
-rm -f Makefile.tmp
-mv Makefile.2 Makefile
+AC_OUTPUT(Makefile po/Makefile.in:po/Make-in,
+[sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile])