-# This file is a shell script that supplies the information necessary
-# to tailor a template configure script into the configure script
-# appropriate for this directory. For more information, check any
-# existing configure script.
+dnl Process this file with autoconf to produce a configure script.
+dnl
-srctrigger=z8k-dis.c
-srcname="opcodes"
+AC_PREREQ(2.13)
+AC_INIT(z8k-dis.c)
-# per-host:
+AC_CANONICAL_SYSTEM
+AC_ISC_POSIX
-case "${host}" in
- a29k-nyu-sym1) my_host=ultra3 ;;
- hppa*-hp-bsd) my_host=hppabsd ;;
- hppa*-hp-hpux) my_host=hppahpux ;;
- i860-stratus-sysv4) my_host=stratus ;;
- i[34]86-*-go32) my_host=go32 ;;
- i[34]86-*-linux) my_host=i386linux ;;
- i[34]86-*-mach) my_host=i386mach ;;
- i[34]86-*-msdos*) my_host=dose ;;
- i[34]86-*-sysv*) my_host=i386v ;;
- i[34]86-*-sco) my_host=i386v ;;
- i[34]86-*-sysv4*) my_host=i386v4 ;;
- i[34]86-ncr-sysv4*) my_host=ncr3000 ;;
- m68k-apollo-bsd*) my_host=apollo68 ;;
- m68k-apollo-sysv*) my_host=apollov68 ;;
- m68k-cbm-amigados) my_host=amigados ;;
- m68k-cbm-sysv4*) my_host=amix ;;
- m68k-hp-bsd) my_host=hp300bsd ;;
- m68k-hp-hpux) my_host=hp300 ;; # renamed from hp9000
- m68k-sony-*) my_host=news ;;
- m68k-sun-sunos*) my_host=sun3 ;;
- m88k-dg-dgux) my_host=dgux ;;
- m88k-harris-*) my_host=harris ;;
- m88k-motorola-*) my_host=delta88 ;;
- mips-dec-ultrix) my_host=decstation ;;
- mips-sgi-irix | mips-sgi-irix3) my_host=irix3 ;;
- mips-sgi-irix4) my_host=irix4 ;;
- romp-ibm-bsd*) my_host=rtbsd ;;
- rs6000-ibm-aix) my_host=rs6000 ;;
- sparc-*-sysv4) my_host=sysv4 ;;
- sparc-*-sysv64) my_host=sysv4-ll ;;
- sparc-sun-solaris2) my_host=solaris2 ;;
- sparc-sun-sunos*) my_host=sparc ;;
- sparc-sun-sunos64) my_host=sparc-ll ;;
- tahoe-*-*) my_host=tahoe ;;
- vax-dec-bsd*) my_host=vaxbsd ;;
- vax-dec-ultrix*) my_host=vaxult ;;
- we32k-*-*) my_host=we32k ;;
+# We currently only use the version number for the name of any shared
+# library. For user convenience, we always use the same version
+# number that BFD is using.
+changequote(,)dnl
+BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in`
+changequote([,])dnl
+
+AM_INIT_AUTOMAKE(opcodes, ${BFD_VERSION})
+
+dnl These must be called before AM_PROG_LIBTOOL, because it may want
+dnl to call AC_CHECK_PROG.
+AC_CHECK_TOOL(AR, ar)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+
+dnl Default to a non shared library. This may be overridden by the
+dnl configure option --enable-shared.
+AM_DISABLE_SHARED
+
+AM_PROG_LIBTOOL
+
+AC_ARG_ENABLE(targets,
+[ --enable-targets alternative target configurations],
+[case "${enableval}" in
+ yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac])dnl
+AC_ARG_ENABLE(commonbfdlib,
+[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
+[case "${enableval}" in
+ yes) commonbfdlib=true ;;
+ no) commonbfdlib=false ;;
+ *) AC_MSG_ERROR([bad value ${enableval} for opcodes commonbfdlib option]) ;;
+esac])dnl
+
+build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
+AC_ARG_ENABLE(build-warnings,
+[ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
+[case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi])dnl
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
+fi
+AC_SUBST(WARN_CFLAGS)
+
+AM_CONFIG_HEADER(config.h:config.in)
+
+if test -z "$target" ; then
+ AC_MSG_ERROR(Unrecognized target system type; please check config.sub.)
+fi
+
+AM_MAINTAINER_MODE
+AC_EXEEXT
+
+# host-specific stuff:
+
+AC_PROG_CC
+
+ALL_LINGUAS="fr sv tr es da de"
+CY_GNU_GETTEXT
+
+. ${srcdir}/../bfd/configure.host
+
+BFD_CC_FOR_BUILD
+
+AC_SUBST(HDEFINES)
+AC_PROG_INSTALL
+AC_CHECK_HEADERS(string.h strings.h stdlib.h)
-# Set up to make a link between the host's include file and "sysdep.h".
-files="../bfd/hosts/${my_host}.h"
+cgen_maint=no
+cgendir='$(srcdir)/../cgen'
-links="sysdep.h"
+AC_ARG_ENABLE(cgen-maint,
+[ --enable-cgen-maint[=dir] build cgen generated files],
+[case "${enableval}" in
+ yes) cgen_maint=yes ;;
+ no) cgen_maint=no ;;
+ *)
+ # argument is cgen install directory (not implemented yet).
+ # Having a `share' directory might be more appropriate for the .scm,
+ # .cpu, etc. files.
+ cgen_maint=yes
+ cgendir=${cgen_maint}/lib/cgen
+ ;;
+esac])dnl
+AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} = xyes)
+AC_SUBST(cgendir)
-if [ ! -f ${srcdir}/${files} ] ; then
- if [ -n "${my_host}" ] ; then
- echo '***' No file ${srcdir}/${files} 1>&2
+using_cgen=no
+
+# Horrible hacks to build DLLs on Windows.
+WIN32LDFLAGS=
+WIN32LIBADD=
+case "${host}" in
+*-*-cygwin*)
+ if test "$enable_shared" = "yes"; then
+ WIN32LDFLAGS="-no-undefined"
+ WIN32LIBADD="-L`pwd`/../bfd -lbfd -L`pwd`/../libiberty -liberty -L`pwd`/../intl -lintl -lcygwin"
+ fi
+ ;;
+esac
+AC_SUBST(WIN32LDFLAGS)
+AC_SUBST(WIN32LIBADD)
+
+# target-specific stuff:
+
+# Canonicalize the secondary target names.
+if test -n "$enable_targets" ; then
+ for targ in `echo $enable_targets | sed 's/,/ /g'`
+ do
+ result=`$ac_config_sub $targ 2>/dev/null`
+ if test -n "$result" ; then
+ canon_targets="$canon_targets $result"
+ else
+ # Allow targets that config.sub doesn't recognize, like "all".
+ canon_targets="$canon_targets $targ"
fi
- echo '***' ${srcname} does not support host ${host} 1>&2
- exit 1
+ done
fi
-host_makefile_frag=
-if [ -f ${srcdir}/../bfd/config/${my_host}.mh ] ; then
- host_makefile_frag=../bfd/config/${my_host}.mh
+all_targets=false
+selarchs=
+for targ in $target $canon_targets
+do
+ if test "x$targ" = "xall" ; then
+ all_targets=true
+ else
+ . $srcdir/../bfd/config.bfd
+ selarchs="$selarchs $targ_archs"
+ fi
+done
+
+# Utility var, documents generic cgen support files.
+
+cgen_files="cgen-opc.lo cgen-asm.lo cgen-dis.lo"
+
+# We don't do any links based on the target system, just makefile config.
+
+if test x${all_targets} = xfalse ; then
+
+ # Target architecture .o files.
+ ta=
+
+ for arch in $selarchs
+ do
+ ad=`echo $arch | sed -e s/bfd_//g -e s/_arch//g`
+ archdefs="$archdefs -DARCH_$ad"
+ case "$arch" in
+ bfd_a29k_arch) ta="$ta a29k-dis.lo" ;;
+ bfd_alliant_arch) ;;
+ bfd_alpha_arch) ta="$ta alpha-dis.lo alpha-opc.lo" ;;
+ bfd_arc_arch) ta="$ta arc-dis.lo arc-opc.lo arc-ext.lo" ;;
+ bfd_arm_arch) ta="$ta arm-dis.lo" ;;
+ bfd_avr_arch) ta="$ta avr-dis.lo" ;;
+ bfd_convex_arch) ;;
+ bfd_cris_arch) ta="$ta cris-dis.lo cris-opc.lo" ;;
+ bfd_d10v_arch) ta="$ta d10v-dis.lo d10v-opc.lo" ;;
+ bfd_d30v_arch) ta="$ta d30v-dis.lo d30v-opc.lo" ;;
+ bfd_fr30_arch) ta="$ta fr30-asm.lo fr30-desc.lo fr30-dis.lo fr30-ibld.lo fr30-opc.lo" using_cgen=yes ;;
+ bfd_h8300_arch) ta="$ta h8300-dis.lo" ;;
+ bfd_h8500_arch) ta="$ta h8500-dis.lo" ;;
+ bfd_hppa_arch) ta="$ta hppa-dis.lo" ;;
+ bfd_i370_arch) ta="$ta i370-dis.lo i370-opc.lo" ;;
+ bfd_i386_arch) ta="$ta i386-dis.lo" ;;
+ bfd_i860_arch) ta="$ta i860-dis.lo" ;;
+ bfd_i960_arch) ta="$ta i960-dis.lo" ;;
+ bfd_ia64_arch) ta="$ta ia64-dis.lo ia64-opc.lo" ;;
+ bfd_m32r_arch) ta="$ta m32r-asm.lo m32r-desc.lo m32r-dis.lo m32r-ibld.lo m32r-opc.lo m32r-opinst.lo" using_cgen=yes ;;
+ bfd_m68hc11_arch) ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;;
+ bfd_m68hc12_arch) ta="$ta m68hc11-dis.lo m68hc11-opc.lo" ;;
+ bfd_m68k_arch) ta="$ta m68k-dis.lo m68k-opc.lo" ;;
+ bfd_m88k_arch) ta="$ta m88k-dis.lo" ;;
+ bfd_mcore_arch) ta="$ta mcore-dis.lo" ;;
+ bfd_mips_arch) ta="$ta mips-dis.lo mips-opc.lo mips16-opc.lo" ;;
+ bfd_mmix_arch) ta="$ta mmix-dis.lo mmix-opc.lo" ;;
+ bfd_mn10200_arch) ta="$ta m10200-dis.lo m10200-opc.lo" ;;
+ bfd_mn10300_arch) ta="$ta m10300-dis.lo m10300-opc.lo" ;;
+ bfd_ns32k_arch) ta="$ta ns32k-dis.lo" ;;
+ bfd_openrisc_arch) ta="$ta openrisc-asm.lo openrisc-desc.lo openrisc-dis.lo openrisc-ibld.lo openrisc-opc.lo" using_cgen=yes ;;
+ bfd_or32_arch) ta="$ta or32-dis.lo or32-opc.lo" using_cgen=yes ;;
+ bfd_pdp11_arch) ta="$ta pdp11-dis.lo pdp11-opc.lo" ;;
+ bfd_pj_arch) ta="$ta pj-dis.lo pj-opc.lo" ;;
+ bfd_powerpc_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;;
+ bfd_powerpc_64_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;;
+ bfd_pyramid_arch) ;;
+ bfd_romp_arch) ;;
+ bfd_rs6000_arch) ta="$ta ppc-dis.lo ppc-opc.lo" ;;
+ bfd_s390_arch) ta="$ta s390-dis.lo s390-opc.lo" ;;
+ bfd_sh_arch)
+ # We can't decide what we want just from the CPU family.
+ # We want SH5 support unless a specific version of sh is
+ # specified, as in sh3-elf, sh3b-linux-gnu, etc.
+ # Include it just for ELF targets, since the SH5 bfd:s are ELF only.
+ for t in $target $canon_targets; do
+ case $t in
+ all | sh64-* | sh-*-*elf* | shl-*-*elf* | sh-*-linux* | shl-*-linux*)
+ ta="$ta sh64-dis.lo sh64-opc.lo"
+ archdefs="$archdefs -DINCLUDE_SHMEDIA"
+ break;;
+ esac;
+ done
+ ta="$ta sh-dis.lo" ;;
+ bfd_sparc_arch) ta="$ta sparc-dis.lo sparc-opc.lo" ;;
+ bfd_tahoe_arch) ;;
+ bfd_tic30_arch) ta="$ta tic30-dis.lo" ;;
+ bfd_tic54x_arch) ta="$ta tic54x-dis.lo tic54x-opc.lo" ;;
+ bfd_tic80_arch) ta="$ta tic80-dis.lo tic80-opc.lo" ;;
+ bfd_v850_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
+ bfd_v850e_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
+ bfd_v850ea_arch) ta="$ta v850-opc.lo v850-dis.lo" ;;
+ bfd_vax_arch) ta="$ta vax-dis.lo" ;;
+ bfd_w65_arch) ta="$ta w65-dis.lo" ;;
+ bfd_we32k_arch) ;;
+ bfd_xstormy16_arch) ta="$ta xstormy16-asm.lo xstormy16-desc.lo xstormy16-dis.lo xstormy16-ibld.lo xstormy16-opc.lo" using_cgen=yes ;;
+ bfd_z8k_arch) ta="$ta z8k-dis.lo" ;;
+
+ "") ;;
+ *) AC_MSG_ERROR(*** unknown target architecture $arch) ;;
+ esac
+ done
+
+ if test $using_cgen = yes ; then
+ ta="$ta $cgen_files"
+ fi
+
+ # Weed out duplicate .o files.
+ f=""
+ for i in $ta ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+ done
+ ta="$f"
+
+ # And duplicate -D flags.
+ f=""
+ for i in $archdefs ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+ done
+ archdefs="$f"
+
+ BFD_MACHINES="$ta"
+
+else # all_targets is true
+ archdefs=-DARCH_all
+ BFD_MACHINES='$(ALL_MACHINES)'
fi
-# per-target:
+AC_SUBST(archdefs)
+AC_SUBST(BFD_MACHINES)
+
+AC_OUTPUT(Makefile po/Makefile.in:po/Make-in,
+[sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile])