/* Print Motorola 68k instructions.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004
+ Free Software Foundation, Inc.
-This file is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This file is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+#include "sysdep.h"
#include "dis-asm.h"
#include "floatformat.h"
-
-/* Opcode/m68k.h is a massive table. As a kludge, break it up into
- two pieces. This makes nonportable C -- FIXME -- it assumes that
- two data items declared near each other will be contiguous in
- memory. This kludge can be removed, FIXME, when GCC is fixed to not
- be a hog about initializers. */
-
-#ifdef __GNUC__
-#define BREAK_UP_BIG_DECL }; \
- struct m68k_opcode m68k_opcodes_2[] = {
-#define AND_OTHER_PART sizeof (m68k_opcodes_2)
-#endif
+#include "libiberty.h"
+#include "opintl.h"
#include "opcode/m68k.h"
-
/* Local function prototypes */
+static int
+fetch_data PARAMS ((struct disassemble_info *, bfd_byte *));
+
+static void
+dummy_print_address PARAMS ((bfd_vma, struct disassemble_info *));
+
static int
fetch_arg PARAMS ((unsigned char *, int, int, disassemble_info *));
static void
-print_base PARAMS ((int, int, disassemble_info*));
+print_base PARAMS ((int, bfd_vma, disassemble_info *));
static unsigned char *
print_indexed PARAMS ((int, unsigned char *, bfd_vma, disassemble_info *));
static int
-print_insn_arg PARAMS ((char *, unsigned char *, unsigned char *, bfd_vma,
- disassemble_info *));
+print_insn_arg PARAMS ((const char *, unsigned char *, unsigned char *,
+ bfd_vma, disassemble_info *));
-CONST char * CONST fpcr_names[] = {
- "", "fpiar", "fpsr", "fpiar/fpsr", "fpcr",
- "fpiar/fpcr", "fpsr/fpcr", "fpiar/fpsr/fpcr"};
+static bfd_boolean m68k_valid_ea (char code, int val);
-static char *reg_names[] = {
- "d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7", "a0",
- "a1", "a2", "a3", "a4", "a5", "fp", "sp", "ps", "pc"};
+const char * const fpcr_names[] =
+{
+ "", "%fpiar", "%fpsr", "%fpiar/%fpsr", "%fpcr",
+ "%fpiar/%fpcr", "%fpsr/%fpcr", "%fpiar/%fpsr/%fpcr"
+};
-/* Sign-extend an (unsigned char). */
+static char *const reg_names[] =
+{
+ "%d0", "%d1", "%d2", "%d3", "%d4", "%d5", "%d6", "%d7",
+ "%a0", "%a1", "%a2", "%a3", "%a4", "%a5", "%fp", "%sp",
+ "%ps", "%pc"
+};
+
+/* Name of register halves for MAC/EMAC.
+ Seperate from reg_names since 'spu', 'fpl' look weird. */
+static char *const reg_half_names[] =
+{
+ "%d0", "%d1", "%d2", "%d3", "%d4", "%d5", "%d6", "%d7",
+ "%a0", "%a1", "%a2", "%a3", "%a4", "%a5", "%a6", "%a7",
+ "%ps", "%pc"
+};
+
+/* Sign-extend an (unsigned char). */
#if __STDC__ == 1
-#define COERCE_SIGNED_CHAR(ch) ((signed char)(ch))
+#define COERCE_SIGNED_CHAR(ch) ((signed char) (ch))
#else
-#define COERCE_SIGNED_CHAR(ch) ((int)(((ch) ^ 0x80) & 0xFF) - 128)
+#define COERCE_SIGNED_CHAR(ch) ((int) (((ch) ^ 0x80) & 0xFF) - 128)
#endif
/* Get a 1 byte signed integer. */
COERCE16 ((p[-2] << 8) + p[-1]))
/* Get a 4 byte signed integer. */
-#define COERCE32(x) ((int) (((x) ^ 0x80000000) - 0x80000000))
+#define COERCE32(x) ((bfd_signed_vma) ((x) ^ 0x80000000) - 0x80000000)
#define NEXTLONG(p) \
(p += 4, FETCH_DATA (info, p), \
(COERCE32 ((((((p[-4] << 8) + p[-3]) << 8) + p[-2]) << 8) + p[-1])))
-/* NEXTSINGLE and NEXTDOUBLE handle alignment problems, but not
- * byte-swapping or other float format differences. FIXME! */
-
-union number {
- double d;
- float f;
- char c[10];
-};
+/* Get a 4 byte unsigned integer. */
+#define NEXTULONG(p) \
+ (p += 4, FETCH_DATA (info, p), \
+ (unsigned int) ((((((p[-4] << 8) + p[-3]) << 8) + p[-2]) << 8) + p[-1]))
+/* Get a single precision float. */
#define NEXTSINGLE(val, p) \
- { int i; union number u;\
- FETCH_DATA (info, p + sizeof (float));\
- for (i = 0; i < sizeof(float); i++) u.c[i] = *p++; \
- val = u.f; }
+ (p += 4, FETCH_DATA (info, p), \
+ floatformat_to_double (&floatformat_ieee_single_big, (char *) p - 4, &val))
+/* Get a double precision float. */
#define NEXTDOUBLE(val, p) \
- { int i; union number u;\
- FETCH_DATA (info, p + sizeof (double));\
- for (i = 0; i < sizeof(double); i++) u.c[i] = *p++; \
- val = u.d; }
+ (p += 8, FETCH_DATA (info, p), \
+ floatformat_to_double (&floatformat_ieee_double_big, (char *) p - 8, &val))
-/* Need a function to convert from extended to double precision... */
-#define NEXTEXTEND(p) \
- (p += 12, FETCH_DATA (info, p), 0.0)
+/* Get an extended precision float. */
+#define NEXTEXTEND(val, p) \
+ (p += 12, FETCH_DATA (info, p), \
+ floatformat_to_double (&floatformat_m68881_ext, (char *) p - 12, &val))
/* Need a function to convert from packed to double
precision. Actually, it's easier to print a
there should be a special case to handle this... */
#define NEXTPACKED(p) \
(p += 12, FETCH_DATA (info, p), 0.0)
-
\f
/* Maximum length of an instruction. */
#define MAXLEN 22
#include <setjmp.h>
-struct private
-{
+struct private {
/* Points to first byte not fetched. */
bfd_byte *max_fetched;
bfd_byte the_buffer[MAXLEN];
to ADDR (exclusive) are valid. Returns 1 for success, longjmps
on error. */
#define FETCH_DATA(info, addr) \
- ((addr) <= ((struct private *)(info->private_data))->max_fetched \
+ ((addr) <= ((struct private *) (info->private_data))->max_fetched \
? 1 : fetch_data ((info), (addr)))
static int
/* This function is used to print to the bit-bucket. */
static int
#ifdef __STDC__
-dummy_printer (FILE * file, const char * format, ...)
+dummy_printer (FILE *file ATTRIBUTE_UNUSED,
+ const char *format ATTRIBUTE_UNUSED, ...)
#else
-dummy_printer (file) FILE *file;
+dummy_printer (file)
+ FILE *file ATTRIBUTE_UNUSED;
#endif
- { return 0; }
-
-void
-dummy_print_address (vma, info)
- bfd_vma vma;
- struct disassemble_info *info;
{
+ return 0;
}
-static const struct m68k_opcode *
-opcode (idx)
- int idx;
+static void
+dummy_print_address (vma, info)
+ bfd_vma vma ATTRIBUTE_UNUSED;
+ struct disassemble_info *info ATTRIBUTE_UNUSED;
{
-#ifdef __GNUC__
- const int max = sizeof (m68k_opcodes) / sizeof (m68k_opcodes[0]);
- if (idx >= max)
- return &m68k_opcodes_2[idx - max];
-#endif
- return &m68k_opcodes[idx];
}
-/* Print the m68k instruction at address MEMADDR in debugged memory,
- on INFO->STREAM. Returns length of the instruction, in bytes. */
+/* Try to match the current instruction to best and if so, return the
+ number of bytes consumed from the instruction stream, else zero. */
-int
-print_insn_m68k (memaddr, info)
- bfd_vma memaddr;
- disassemble_info *info;
+static int
+match_insn_m68k (bfd_vma memaddr, disassemble_info * info,
+ const struct m68k_opcode * best, struct private * priv)
{
- register int i;
- register unsigned char *p;
unsigned char *save_p;
- register char *d;
- register unsigned long bestmask;
- const struct m68k_opcode *best = 0;
- struct private priv;
- bfd_byte *buffer = priv.the_buffer;
+ unsigned char *p;
+ const char *d;
+
+ bfd_byte *buffer = priv->the_buffer;
fprintf_ftype save_printer = info->fprintf_func;
- void (*save_print_address) PARAMS((bfd_vma, struct disassemble_info*))
+ void (* save_print_address) (bfd_vma, struct disassemble_info *)
= info->print_address_func;
- info->private_data = (PTR) &priv;
- priv.max_fetched = priv.the_buffer;
- priv.insn_start = memaddr;
- if (setjmp (priv.bailout) != 0)
- /* Error return. */
- return -1;
-
- bestmask = 0;
- FETCH_DATA (info, buffer + 2);
- for (i = 0; i < numopcodes; i++)
- {
- const struct m68k_opcode *opc = opcode (i);
- unsigned long opcode = opc->opcode;
- unsigned long match = opc->match;
-
- if (opc->flags & F_ALIAS)
- continue;
-
- if (((0xff & buffer[0] & (match >> 24)) == (0xff & (opcode >> 24)))
- && ((0xff & buffer[1] & (match >> 16)) == (0xff & (opcode >> 16)))
- /* Only fetch the next two bytes if we need to. */
- && (((0xffff & match) == 0)
- ||
- (FETCH_DATA (info, buffer + 4)
- && ((0xff & buffer[2] & (match >> 8)) == (0xff & (opcode >> 8)))
- && ((0xff & buffer[3] & match) == (0xff & opcode)))
- ))
- {
- /* Don't use for printout the variants of divul and divsl
- that have the same register number in two places.
- The more general variants will match instead. */
- for (d = opc->args; *d; d += 2)
- if (d[1] == 'D')
- break;
-
- /* Don't use for printout the variants of most floating
- point coprocessor instructions which use the same
- register number in two places, as above. */
- if (*d == 0)
- for (d = opc->args; *d; d += 2)
- if (d[1] == 't')
- break;
-
- if (*d == 0 && match > bestmask)
- {
- best = opc;
- bestmask = match;
- }
- }
- }
-
- if (best == 0)
- goto invalid;
-
/* Point at first word of argument data,
and at descriptor for first argument. */
p = buffer + 2;
-
+
/* Figure out how long the fixed-size portion of the instruction is.
The only place this is stored in the opcode table is
in the arguments--look for arguments which specify fields in the 2nd
or 3rd words of the instruction. */
for (d = best->args; *d; d += 2)
{
- /* I don't think it is necessary to be checking d[0] here; I suspect
- all this could be moved to the case statement below. */
+ /* I don't think it is necessary to be checking d[0] here;
+ I suspect all this could be moved to the case statement below. */
if (d[0] == '#')
{
if (d[1] == 'l' && p - buffer < 6)
p = buffer + 6;
- else if (p - buffer < 4 && d[1] != 'C' && d[1] != '8' )
+ else if (p - buffer < 4 && d[1] != 'C' && d[1] != '8')
p = buffer + 4;
}
+
if ((d[0] == 'L' || d[0] == 'l') && d[1] == 'w' && p - buffer < 4)
p = buffer + 4;
+
switch (d[1])
{
case '1':
break;
}
}
- /* pflusha is an exception; it takes no arguments but is two words long. */
- if (buffer[0] == 0xf0 && buffer[1] == 0 && buffer[2] == 0x24 &&
- buffer[3] == 0)
+
+ /* pflusha is an exceptions. It takes no arguments but is two words
+ long. Recognize it by looking at the lower 16 bits of the mask. */
+ if (p - buffer < 4 && (best->match & 0xFFFF) != 0)
p = buffer + 4;
-
+
+ /* lpstop is another exception. It takes a one word argument but is
+ three words long. */
+ if (p - buffer < 6
+ && (best->match & 0xffff) == 0xffff
+ && best->args[0] == '#'
+ && best->args[1] == 'w')
+ {
+ /* Copy the one word argument into the usual location for a one
+ word argument, to simplify printing it. We can get away with
+ this because we know exactly what the second word is, and we
+ aren't going to print anything based on it. */
+ p = buffer + 6;
+ FETCH_DATA (info, p);
+ buffer[2] = buffer[4];
+ buffer[3] = buffer[5];
+ }
+
FETCH_DATA (info, p);
-
- d = best->args;
- /* We can the operands twice. The first time we don't print anything,
- but look for errors. */
+ d = best->args;
save_p = p;
info->print_address_func = dummy_print_address;
- info->fprintf_func = (fprintf_ftype)dummy_printer;
- for ( ; *d; d += 2)
+ info->fprintf_func = (fprintf_ftype) dummy_printer;
+
+ /* We scan the operands twice. The first time we don't print anything,
+ but look for errors. */
+ for (; *d; d += 2)
{
- int eaten = print_insn_arg (d, buffer, p, memaddr + p - buffer, info);
+ int eaten = print_insn_arg (d, buffer, p, memaddr + (p - buffer), info);
+
if (eaten >= 0)
p += eaten;
else if (eaten == -1)
- goto invalid;
+ {
+ info->fprintf_func = save_printer;
+ info->print_address_func = save_print_address;
+ return 0;
+ }
else
{
- (*info->fprintf_func)(info->stream,
- "<internal error in opcode table: %s %s>\n",
- best->name,
- best->args);
- goto invalid;
+ info->fprintf_func (info->stream,
+ /* xgettext:c-format */
+ _("<internal error in opcode table: %s %s>\n"),
+ best->name, best->args);
+ info->fprintf_func = save_printer;
+ info->print_address_func = save_print_address;
+ return 2;
}
-
}
+
p = save_p;
info->fprintf_func = save_printer;
info->print_address_func = save_print_address;
d = best->args;
- (*info->fprintf_func) (info->stream, "%s", best->name);
+ info->fprintf_func (info->stream, "%s", best->name);
if (*d)
- (*info->fprintf_func) (info->stream, " ");
+ info->fprintf_func (info->stream, " ");
while (*d)
{
- p += print_insn_arg (d, buffer, p, memaddr + p - buffer, info);
+ p += print_insn_arg (d, buffer, p, memaddr + (p - buffer), info);
d += 2;
+
if (*d && *(d - 2) != 'I' && *d != 'k')
- (*info->fprintf_func) (info->stream, ",");
+ info->fprintf_func (info->stream, ",");
}
+
return p - buffer;
+}
+
+/* Print the m68k instruction at address MEMADDR in debugged memory,
+ on INFO->STREAM. Returns length of the instruction, in bytes. */
+
+int
+print_insn_m68k (memaddr, info)
+ bfd_vma memaddr;
+ disassemble_info *info;
+{
+ int i;
+ const char *d;
+ unsigned int arch_mask;
+ struct private priv;
+ bfd_byte *buffer = priv.the_buffer;
+ int major_opcode;
+ static int numopcodes[16];
+ static const struct m68k_opcode **opcodes[16];
+ int val;
+
+ if (!opcodes[0])
+ {
+ /* Speed up the matching by sorting the opcode
+ table on the upper four bits of the opcode. */
+ const struct m68k_opcode **opc_pointer[16];
+
+ /* First count how many opcodes are in each of the sixteen buckets. */
+ for (i = 0; i < m68k_numopcodes; i++)
+ numopcodes[(m68k_opcodes[i].opcode >> 28) & 15]++;
+
+ /* Then create a sorted table of pointers
+ that point into the unsorted table. */
+ opc_pointer[0] = xmalloc (sizeof (struct m68k_opcode *)
+ * m68k_numopcodes);
+ opcodes[0] = opc_pointer[0];
+
+ for (i = 1; i < 16; i++)
+ {
+ opc_pointer[i] = opc_pointer[i - 1] + numopcodes[i - 1];
+ opcodes[i] = opc_pointer[i];
+ }
+
+ for (i = 0; i < m68k_numopcodes; i++)
+ *opc_pointer[(m68k_opcodes[i].opcode >> 28) & 15]++ = &m68k_opcodes[i];
+ }
+
+ info->private_data = (PTR) &priv;
+ /* Tell objdump to use two bytes per chunk
+ and six bytes per line for displaying raw data. */
+ info->bytes_per_chunk = 2;
+ info->bytes_per_line = 6;
+ info->display_endian = BFD_ENDIAN_BIG;
+ priv.max_fetched = priv.the_buffer;
+ priv.insn_start = memaddr;
+
+ if (setjmp (priv.bailout) != 0)
+ /* Error return. */
+ return -1;
+
+ switch (info->mach)
+ {
+ default:
+ case 0:
+ arch_mask = (unsigned int) -1;
+ break;
+ case bfd_mach_m68000:
+ arch_mask = m68000|m68881|m68851;
+ break;
+ case bfd_mach_m68008:
+ arch_mask = m68008|m68881|m68851;
+ break;
+ case bfd_mach_m68010:
+ arch_mask = m68010|m68881|m68851;
+ break;
+ case bfd_mach_m68020:
+ arch_mask = m68020|m68881|m68851;
+ break;
+ case bfd_mach_m68030:
+ arch_mask = m68030|m68881|m68851;
+ break;
+ case bfd_mach_m68040:
+ arch_mask = m68040|m68881|m68851;
+ break;
+ case bfd_mach_m68060:
+ arch_mask = m68060|m68881|m68851;
+ break;
+ case bfd_mach_mcf5200:
+ arch_mask = mcfisa_a;
+ break;
+ case bfd_mach_mcf521x:
+ case bfd_mach_mcf528x:
+ arch_mask = mcfisa_a|mcfhwdiv|mcfisa_aa|mcfusp|mcfemac;
+ break;
+ case bfd_mach_mcf5206e:
+ arch_mask = mcfisa_a|mcfhwdiv|mcfmac;
+ break;
+ case bfd_mach_mcf5249:
+ arch_mask = mcfisa_a|mcfhwdiv|mcfemac;
+ break;
+ case bfd_mach_mcf5307:
+ arch_mask = mcfisa_a|mcfhwdiv|mcfmac;
+ break;
+ case bfd_mach_mcf5407:
+ arch_mask = mcfisa_a|mcfhwdiv|mcfisa_b|mcfmac;
+ break;
+ case bfd_mach_mcf547x:
+ case bfd_mach_mcf548x:
+ case bfd_mach_mcfv4e:
+ arch_mask = mcfisa_a|mcfhwdiv|mcfisa_b|mcfusp|cfloat|mcfemac;
+ break;
+ }
+
+ FETCH_DATA (info, buffer + 2);
+ major_opcode = (buffer[0] >> 4) & 15;
+
+ for (i = 0; i < numopcodes[major_opcode]; i++)
+ {
+ const struct m68k_opcode *opc = opcodes[major_opcode][i];
+ unsigned long opcode = opc->opcode;
+ unsigned long match = opc->match;
+
+ if (((0xff & buffer[0] & (match >> 24)) == (0xff & (opcode >> 24)))
+ && ((0xff & buffer[1] & (match >> 16)) == (0xff & (opcode >> 16)))
+ /* Only fetch the next two bytes if we need to. */
+ && (((0xffff & match) == 0)
+ ||
+ (FETCH_DATA (info, buffer + 4)
+ && ((0xff & buffer[2] & (match >> 8)) == (0xff & (opcode >> 8)))
+ && ((0xff & buffer[3] & match) == (0xff & opcode)))
+ )
+ && (opc->arch & arch_mask) != 0)
+ {
+ /* Don't use for printout the variants of divul and divsl
+ that have the same register number in two places.
+ The more general variants will match instead. */
+ for (d = opc->args; *d; d += 2)
+ if (d[1] == 'D')
+ break;
+
+ /* Don't use for printout the variants of most floating
+ point coprocessor instructions which use the same
+ register number in two places, as above. */
+ if (*d == '\0')
+ for (d = opc->args; *d; d += 2)
+ if (d[1] == 't')
+ break;
+
+ /* Don't match fmovel with more than one register;
+ wait for fmoveml. */
+ if (*d == '\0')
+ {
+ for (d = opc->args; *d; d += 2)
+ {
+ if (d[0] == 's' && d[1] == '8')
+ {
+ val = fetch_arg (buffer, d[1], 3, info);
+ if ((val & (val - 1)) != 0)
+ break;
+ }
+ }
+ }
+
+ if (*d == '\0')
+ if ((val = match_insn_m68k (memaddr, info, opc, & priv)))
+ return val;
+ }
+ }
- invalid:
/* Handle undefined instructions. */
- info->fprintf_func = save_printer;
- info->print_address_func = save_print_address;
- (*info->fprintf_func) (info->stream, "0%o",
- (buffer[0] << 8) + buffer[1]);
+ info->fprintf_func (info->stream, "0%o", (buffer[0] << 8) + buffer[1]);
return 2;
}
/* Returns number of bytes "eaten" by the operand, or
return -1 if an invalid operand was found, or -2 if
- an opcode tabe error was found. */
+ an opcode tabe error was found. */
static int
print_insn_arg (d, buffer, p0, addr, info)
- char *d;
+ const char *d;
unsigned char *buffer;
unsigned char *p0;
- bfd_vma addr; /* PC for this arg to be relative to */
+ bfd_vma addr; /* PC for this arg to be relative to. */
disassemble_info *info;
{
- register int val = 0;
- register int place = d[1];
- register unsigned char *p = p0;
+ int val = 0;
+ int place = d[1];
+ unsigned char *p = p0;
int regno;
- register CONST char *regname;
- register unsigned char *p1;
+ const char *regname;
+ unsigned char *p1;
double flval;
int flt_p;
+ bfd_signed_vma disp;
+ unsigned int uval;
switch (*d)
{
- case 'c': /* cache identifier */
+ case 'c': /* Cache identifier. */
{
- static char *cacheFieldName[] = { "NOP", "dc", "ic", "bc" };
+ static char *const cacheFieldName[] = { "nc", "dc", "ic", "bc" };
val = fetch_arg (buffer, place, 2, info);
(*info->fprintf_func) (info->stream, cacheFieldName[val]);
break;
}
- case 'a': /* address register indirect only. Cf. case '+'. */
+ case 'a': /* Address register indirect only. Cf. case '+'. */
{
(*info->fprintf_func)
(info->stream,
"%s@",
- reg_names [fetch_arg (buffer, place, 3, info) + 8]);
+ reg_names[fetch_arg (buffer, place, 3, info) + 8]);
break;
}
- case '_': /* 32-bit absolute address for move16. */
+ case '_': /* 32-bit absolute address for move16. */
{
- val = NEXTLONG (p);
- (*info->fprintf_func) (info->stream, "@#");
- (*info->print_address_func) (val, info);
+ uval = NEXTULONG (p);
+ (*info->print_address_func) (uval, info);
break;
}
case 'C':
- (*info->fprintf_func) (info->stream, "ccr");
+ (*info->fprintf_func) (info->stream, "%%ccr");
break;
case 'S':
- (*info->fprintf_func) (info->stream, "sr");
+ (*info->fprintf_func) (info->stream, "%%sr");
break;
case 'U':
- (*info->fprintf_func) (info->stream, "usp");
+ (*info->fprintf_func) (info->stream, "%%usp");
+ break;
+
+ case 'E':
+ (*info->fprintf_func) (info->stream, "%%acc");
+ break;
+
+ case 'G':
+ (*info->fprintf_func) (info->stream, "%%macsr");
+ break;
+
+ case 'H':
+ (*info->fprintf_func) (info->stream, "%%mask");
break;
case 'J':
{
- static struct { char *name; int value; } names[]
- = {{"sfc", 0x000}, {"dfc", 0x001}, {"cacr", 0x002},
- {"tc", 0x003}, {"itt0",0x004}, {"itt1", 0x005},
- {"dtt0",0x006}, {"dtt1",0x007}, {"buscr",0x008},
- {"usp", 0x800}, {"vbr", 0x801}, {"caar", 0x802},
- {"msp", 0x803}, {"isp", 0x804},
+ /* FIXME: There's a problem here, different m68k processors call the
+ same address different names. This table can't get it right
+ because it doesn't know which processor it's disassembling for. */
+ static const struct { char *name; int value; } names[]
+ = {{"%sfc", 0x000}, {"%dfc", 0x001}, {"%cacr", 0x002},
+ {"%tc", 0x003}, {"%itt0",0x004}, {"%itt1", 0x005},
+ {"%dtt0",0x006}, {"%dtt1",0x007}, {"%buscr",0x008},
+ {"%usp", 0x800}, {"%vbr", 0x801}, {"%caar", 0x802},
+ {"%msp", 0x803}, {"%isp", 0x804},
+ {"%flashbar", 0xc04}, {"%rambar", 0xc05}, /* mcf528x added these. */
/* Should we be calling this psr like we do in case 'Y'? */
- {"mmusr",0x805},
+ {"%mmusr",0x805},
- {"urp", 0x806}, {"srp", 0x807}, {"pcr", 0x808}};
+ {"%urp", 0x806}, {"%srp", 0x807}, {"%pcr", 0x808}};
val = fetch_arg (buffer, place, 12, info);
for (regno = sizeof names / sizeof names[0] - 1; regno >= 0; regno--)
if (names[regno].value == val)
{
- (*info->fprintf_func) (info->stream, names[regno].name);
+ (*info->fprintf_func) (info->stream, "%s", names[regno].name);
break;
}
if (regno < 0)
(*info->fprintf_func) (info->stream, "#%d", val);
break;
- case 'M':
- val = fetch_arg (buffer, place, 8, info);
- if (val & 0x80)
- val = val - 0x100;
+ case 'x':
+ val = fetch_arg (buffer, place, 3, info);
+ /* 0 means -1. */
+ if (val == 0)
+ val = -1;
(*info->fprintf_func) (info->stream, "#%d", val);
break;
+ case 'M':
+ if (place == 'h')
+ {
+ static char *const scalefactor_name[] = { "<<", ">>" };
+ val = fetch_arg (buffer, place, 1, info);
+ (*info->fprintf_func) (info->stream, scalefactor_name[val]);
+ }
+ else
+ {
+ val = fetch_arg (buffer, place, 8, info);
+ if (val & 0x80)
+ val = val - 0x100;
+ (*info->fprintf_func) (info->stream, "#%d", val);
+ }
+ break;
+
case 'T':
val = fetch_arg (buffer, place, 4, info);
(*info->fprintf_func) (info->stream, "#%d", val);
break;
case 'r':
- (*info->fprintf_func)
- (info->stream, "%s@",
- reg_names[fetch_arg (buffer, place, 4, info)]);
+ regno = fetch_arg (buffer, place, 4, info);
+ if (regno > 7)
+ (*info->fprintf_func) (info->stream, "%s@", reg_names[regno]);
+ else
+ (*info->fprintf_func) (info->stream, "@(%s)", reg_names[regno]);
break;
case 'F':
(*info->fprintf_func)
- (info->stream, "fp%d",
+ (info->stream, "%%fp%d",
fetch_arg (buffer, place, 3, info));
break;
case 'O':
val = fetch_arg (buffer, place, 6, info);
if (val & 0x20)
- (*info->fprintf_func) (info->stream, "%s", reg_names [val & 7]);
+ (*info->fprintf_func) (info->stream, "%s", reg_names[val & 7]);
else
(*info->fprintf_func) (info->stream, "%d", val);
break;
else if (place == 'C')
{
val = fetch_arg (buffer, place, 7, info);
- if ( val > 63 ) /* This is a signed constant. */
+ if (val > 63) /* This is a signed constant. */
val -= 128;
(*info->fprintf_func) (info->stream, "{#%d}", val);
}
val = fetch_arg (buffer, place, 8, info);
else if (place == 'b')
val = NEXTBYTE (p1);
- else if (place == 'w')
+ else if (place == 'w' || place == 'W')
val = NEXTWORD (p1);
else if (place == 'l')
val = NEXTLONG (p1);
case 'B':
if (place == 'b')
- val = NEXTBYTE (p);
+ disp = NEXTBYTE (p);
else if (place == 'B')
- val = COERCE_SIGNED_CHAR(buffer[1]);
+ disp = COERCE_SIGNED_CHAR (buffer[1]);
else if (place == 'w' || place == 'W')
- val = NEXTWORD (p);
- else if (place == 'l' || place == 'L')
- val = NEXTLONG (p);
+ disp = NEXTWORD (p);
+ else if (place == 'l' || place == 'L' || place == 'C')
+ disp = NEXTLONG (p);
else if (place == 'g')
{
- val = NEXTBYTE (buffer);
- if (val == 0)
- val = NEXTWORD (p);
- else if (val == -1)
- val = NEXTLONG (p);
+ disp = NEXTBYTE (buffer);
+ if (disp == 0)
+ disp = NEXTWORD (p);
+ else if (disp == -1)
+ disp = NEXTLONG (p);
}
else if (place == 'c')
{
if (buffer[1] & 0x40) /* If bit six is one, long offset */
- val = NEXTLONG (p);
+ disp = NEXTLONG (p);
else
- val = NEXTWORD (p);
+ disp = NEXTWORD (p);
}
else
return -2;
- (*info->print_address_func) (addr + val, info);
+ (*info->print_address_func) (addr + disp, info);
break;
case 'd':
val = NEXTWORD (p);
(*info->fprintf_func)
(info->stream, "%s@(%d)",
- reg_names[fetch_arg (buffer, place, 3, info)], val);
+ reg_names[fetch_arg (buffer, place, 3, info) + 8], val);
break;
case 's':
fpcr_names[fetch_arg (buffer, place, 3, info)]);
break;
+ case 'e':
+ val = fetch_arg(buffer, place, 2, info);
+ (*info->fprintf_func) (info->stream, "%%acc%d", val);
+ break;
+
+ case 'g':
+ val = fetch_arg(buffer, place, 1, info);
+ (*info->fprintf_func) (info->stream, "%%accext%s", val==0 ? "01" : "23");
+ break;
+
+ case 'i':
+ val = fetch_arg(buffer, place, 2, info);
+ if (val == 1)
+ (*info->fprintf_func) (info->stream, "<<");
+ else if (val == 3)
+ (*info->fprintf_func) (info->stream, ">>");
+ else
+ return -1;
+ break;
+
case 'I':
/* Get coprocessor ID... */
val = fetch_arg (buffer, 'd', 3, info);
-
+
if (val != 1) /* Unusual coprocessor ID? */
(*info->fprintf_func) (info->stream, "(cpid=%d) ", val);
break;
+ case '4':
case '*':
case '~':
case '%':
case '?':
case '/':
case '&':
- case '`':
case '|':
-
+ case '<':
+ case '>':
+ case 'm':
+ case 'n':
+ case 'o':
+ case 'p':
+ case 'q':
+ case 'v':
+ case 'b':
+ case 'w':
+ case 'y':
+ case 'z':
if (place == 'd')
{
val = fetch_arg (buffer, 'x', 6, info);
else
val = fetch_arg (buffer, 's', 6, info);
+ /* If the <ea> is invalid for *d, then reject this match. */
+ if (m68k_valid_ea (*d, val) == FALSE)
+ return -1;
+
/* Get register number assuming address register. */
regno = (val & 7) + 8;
regname = reg_names[regno];
{
case 0:
val = NEXTWORD (p);
- (*info->fprintf_func) (info->stream, "@#");
(*info->print_address_func) (val, info);
break;
case 1:
- val = NEXTLONG (p);
- (*info->fprintf_func) (info->stream, "@#");
- (*info->print_address_func) (val, info);
+ uval = NEXTULONG (p);
+ (*info->print_address_func) (uval, info);
break;
case 2:
val = NEXTWORD (p);
+ (*info->fprintf_func) (info->stream, "%%pc@(");
(*info->print_address_func) (addr + val, info);
+ (*info->fprintf_func) (info->stream, ")");
break;
case 3:
case 4:
flt_p = 1; /* Assume it's a float... */
- switch( place )
+ switch (place)
{
case 'b':
val = NEXTBYTE (p);
break;
case 'f':
- NEXTSINGLE(flval, p);
+ NEXTSINGLE (flval, p);
break;
case 'F':
- NEXTDOUBLE(flval, p);
+ NEXTDOUBLE (flval, p);
break;
case 'x':
- FETCH_DATA (info, p + 12);
- floatformat_to_double (&floatformat_m68881_ext,
- (char *) p, &flval);
- p += 12;
+ NEXTEXTEND (flval, p);
break;
case 'p':
- flval = NEXTPACKED(p);
+ flval = NEXTPACKED (p);
break;
default:
return -1;
}
- if ( flt_p ) /* Print a float? */
+ if (flt_p) /* Print a float? */
(*info->fprintf_func) (info->stream, "#%g", flval);
else
(*info->fprintf_func) (info->stream, "#%d", val);
return -1;
}
}
+
+ /* If place is '/', then this is the case of the mask bit for
+ mac/emac loads. Now that the arg has been printed, grab the
+ mask bit and if set, add a '&' to the arg. */
+ if (place == '/')
+ {
+ val = fetch_arg (buffer, place, 1, info);
+ if (val)
+ info->fprintf_func (info->stream, "&");
+ }
break;
case 'L':
if (doneany)
(*info->fprintf_func) (info->stream, "/");
doneany = 1;
- (*info->fprintf_func) (info->stream, "fp%d", regno);
+ (*info->fprintf_func) (info->stream, "%%fp%d", regno);
first_regno = regno;
while (val & (1 << (regno + 1)))
++regno;
if (regno > first_regno)
- (*info->fprintf_func) (info->stream, "-fp%d", regno);
+ (*info->fprintf_func) (info->stream, "-%%fp%d", regno);
}
}
+ else if (place == '8')
+ {
+ /* fmoveml for FP status registers */
+ (*info->fprintf_func) (info->stream, "%s",
+ fpcr_names[fetch_arg (buffer, place, 3,
+ info)]);
+ }
else
return -2;
break;
case 'Y':
case 'Z':
case 'W':
+ case '0':
+ case '1':
+ case '2':
case '3':
- case 'P':
{
int val = fetch_arg (buffer, place, 5, info);
char *name = 0;
switch (val)
{
- case 2: name = "tt0"; break;
- case 3: name = "tt1"; break;
- case 0x10: name = "tc"; break;
- case 0x11: name = "drp"; break;
- case 0x12: name = "srp"; break;
- case 0x13: name = "crp"; break;
- case 0x14: name = "cal"; break;
- case 0x15: name = "val"; break;
- case 0x16: name = "scc"; break;
- case 0x17: name = "ac"; break;
- case 0x18: name = "psr"; break;
- case 0x19: name = "pcsr"; break;
+ case 2: name = "%tt0"; break;
+ case 3: name = "%tt1"; break;
+ case 0x10: name = "%tc"; break;
+ case 0x11: name = "%drp"; break;
+ case 0x12: name = "%srp"; break;
+ case 0x13: name = "%crp"; break;
+ case 0x14: name = "%cal"; break;
+ case 0x15: name = "%val"; break;
+ case 0x16: name = "%scc"; break;
+ case 0x17: name = "%ac"; break;
+ case 0x18: name = "%psr"; break;
+ case 0x19: name = "%pcsr"; break;
case 0x1c:
case 0x1d:
{
int break_reg = ((buffer[3] >> 2) & 7);
(*info->fprintf_func)
- (info->stream, val == 0x1c ? "bad%d" : "bac%d",
+ (info->stream, val == 0x1c ? "%%bad%d" : "%%bac%d",
break_reg);
}
break;
(*info->fprintf_func) (info->stream, "<mmu register %d>", val);
}
if (name)
- (*info->fprintf_func) (info->stream, name);
+ (*info->fprintf_func) (info->stream, "%s", name);
}
break;
{
int fc = fetch_arg (buffer, place, 5, info);
if (fc == 1)
- (*info->fprintf_func) (info->stream, "dfc");
+ (*info->fprintf_func) (info->stream, "%%dfc");
else if (fc == 0)
- (*info->fprintf_func) (info->stream, "sfc");
+ (*info->fprintf_func) (info->stream, "%%sfc");
else
- (*info->fprintf_func) (info->stream, "<function code %d>", fc);
+ /* xgettext:c-format */
+ (*info->fprintf_func) (info->stream, _("<function code %d>"), fc);
}
break;
case 'V':
- (*info->fprintf_func) (info->stream, "val");
+ (*info->fprintf_func) (info->stream, "%%val");
break;
case 't':
}
break;
+ case 'u':
+ {
+ short is_upper = 0;
+ int reg = fetch_arg (buffer, place, 5, info);
+
+ if (reg & 0x10)
+ {
+ is_upper = 1;
+ reg &= 0xf;
+ }
+ (*info->fprintf_func) (info->stream, "%s%s",
+ reg_half_names[reg],
+ is_upper ? "u" : "l");
+ }
+ break;
+
default:
return -2;
}
return p - p0;
}
+/* Check if an EA is valid for a particular code. This is required
+ for the EMAC instructions since the type of source address determines
+ if it is a EMAC-load instruciton if the EA is mode 2-5, otherwise it
+ is a non-load EMAC instruction and the bits mean register Ry. */
+
+static bfd_boolean
+m68k_valid_ea (char code, int val)
+{
+ int mode;
+
+ mode = (val >> 3) & 7;
+ if (code == '4')
+ if (!(mode >= 2 && mode <= 5))
+ return FALSE;
+
+ return TRUE;
+}
+
/* Fetch BITS bits from a position in the instruction specified by CODE.
CODE is a "place to put an argument", or 'x' for a destination
that is a general address (mode and register).
int bits;
disassemble_info *info;
{
- register int val = 0;
+ int val = 0;
+
switch (code)
{
+ case '/': /* MAC/EMAC mask bit. */
+ val = buffer[3] >> 5;
+ break;
+
+ case 'G': /* EMAC ACC load. */
+ val = ((buffer[3] >> 3) & 0x2) | ((~buffer[1] >> 7) & 0x1);
+ break;
+
+ case 'H': /* EMAC ACC !load. */
+ val = ((buffer[3] >> 3) & 0x2) | ((buffer[1] >> 7) & 0x1);
+ break;
+
+ case ']': /* EMAC ACCEXT bit. */
+ val = buffer[0] >> 2;
+ break;
+
+ case 'I': /* MAC/EMAC scale factor. */
+ val = buffer[2] >> 1;
+ break;
+
+ case 'F': /* EMAC ACCx. */
+ val = buffer[0] >> 1;
+ break;
+
+ case 'f':
+ val = buffer[1];
+ break;
+
case 's':
val = buffer[1];
break;
val = (buffer[2] << 8) + buffer[3];
val >>= 7;
break;
-
+
case '8':
FETCH_DATA (info, buffer + 3);
val = (buffer[2] << 8) + buffer[3];
val = (buffer[1] >> 6);
break;
+ case 'm':
+ val = (buffer[1] & 0x40 ? 0x8 : 0)
+ | ((buffer[0] >> 1) & 0x7)
+ | (buffer[3] & 0x80 ? 0x10 : 0);
+ break;
+
+ case 'n':
+ val = (buffer[1] & 0x40 ? 0x8 : 0) | ((buffer[0] >> 1) & 0x7);
+ break;
+
+ case 'o':
+ val = (buffer[2] >> 4) | (buffer[3] & 0x80 ? 0x10 : 0);
+ break;
+
+ case 'M':
+ val = (buffer[1] & 0xf) | (buffer[3] & 0x40 ? 0x10 : 0);
+ break;
+
+ case 'N':
+ val = (buffer[3] & 0xf) | (buffer[3] & 0x40 ? 0x10 : 0);
+ break;
+
+ case 'h':
+ val = buffer[2] >> 2;
+ break;
+
default:
abort ();
}
switch (bits)
{
+ case 1:
+ return val & 1;
case 2:
return val & 3;
case 3:
bfd_vma addr;
disassemble_info *info;
{
- register int word;
- static char *scales[] = {"", "*2", "*4", "*8"};
- register int base_disp;
- register int outer_disp;
+ int word;
+ static char *const scales[] = { "", ":2", ":4", ":8" };
+ bfd_vma base_disp;
+ bfd_vma outer_disp;
char buf[40];
+ char vmabuf[50];
word = NEXTWORD (p);
/* Generate the text for the index register.
Where this will be output is not yet determined. */
- sprintf (buf, "[%s.%c%s]",
+ sprintf (buf, "%s:%c%s",
reg_names[(word >> 12) & 0xf],
(word & 0x800) ? 'l' : 'w',
scales[(word >> 9) & 3]);
if ((word & 0x100) == 0)
{
- print_base (basereg,
- ((word & 0x80) ? word | 0xff00 : word & 0xff)
- + ((basereg == -1) ? addr : 0),
- info);
- (*info->fprintf_func) (info->stream, "%s", buf);
+ base_disp = word & 0xff;
+ if ((base_disp & 0x80) != 0)
+ base_disp -= 0x100;
+ if (basereg == -1)
+ base_disp += addr;
+ print_base (basereg, base_disp, info);
+ (*info->fprintf_func) (info->stream, ",%s)", buf);
return p;
}
/* First, compute the displacement to add to the base register. */
if (word & 0200)
- basereg = -2;
+ {
+ if (basereg == -1)
+ basereg = -3;
+ else
+ basereg = -2;
+ }
if (word & 0100)
- buf[0] = 0;
+ buf[0] = '\0';
base_disp = 0;
switch ((word >> 4) & 3)
{
if ((word & 7) == 0)
{
print_base (basereg, base_disp, info);
- (*info->fprintf_func) (info->stream, "%s", buf);
+ if (buf[0] != '\0')
+ (*info->fprintf_func) (info->stream, ",%s", buf);
+ (*info->fprintf_func) (info->stream, ")");
return p;
}
outer_disp = NEXTLONG (p);
}
- (*info->fprintf_func) (info->stream, "%d(", outer_disp);
print_base (basereg, base_disp, info);
-
- /* If postindexed, print the closeparen before the index. */
- if (word & 4)
- (*info->fprintf_func) (info->stream, ")%s", buf);
- /* If preindexed, print the closeparen after the index. */
- else
- (*info->fprintf_func) (info->stream, "%s)", buf);
+ if ((word & 4) == 0 && buf[0] != '\0')
+ {
+ (*info->fprintf_func) (info->stream, ",%s", buf);
+ buf[0] = '\0';
+ }
+ sprintf_vma (vmabuf, outer_disp);
+ (*info->fprintf_func) (info->stream, ")@(%s", vmabuf);
+ if (buf[0] != '\0')
+ (*info->fprintf_func) (info->stream, ",%s", buf);
+ (*info->fprintf_func) (info->stream, ")");
return p;
}
static void
print_base (regno, disp, info)
int regno;
- int disp;
+ bfd_vma disp;
disassemble_info *info;
{
- if (regno == -2)
- (*info->fprintf_func) (info->stream, "%d", disp);
- else if (regno == -1)
- (*info->fprintf_func) (info->stream, "0x%x", (unsigned) disp);
+ if (regno == -1)
+ {
+ (*info->fprintf_func) (info->stream, "%%pc@(");
+ (*info->print_address_func) (disp, info);
+ }
else
- (*info->fprintf_func) (info->stream, "%d(%s)", disp, reg_names[regno]);
+ {
+ char buf[50];
+
+ if (regno == -2)
+ (*info->fprintf_func) (info->stream, "@(");
+ else if (regno == -3)
+ (*info->fprintf_func) (info->stream, "%%zpc@(");
+ else
+ (*info->fprintf_func) (info->stream, "%s@(", reg_names[regno]);
+
+ sprintf_vma (buf, disp);
+ (*info->fprintf_func) (info->stream, "%s", buf);
+ }
}