/* Print mips instructions for GDB, the GNU debugger, or for objdump.
Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2005
+ 2000, 2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
Contributed by Nobuyuki Hikichi(hikichi@sra.co.jp).
- This file is part of GDB, GAS, and the GNU binutils.
+ This file is part of the GNU opcodes library.
- This program is free software; you can redistribute it and/or modify
+ This library is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
+ the Free Software Foundation; either version 3, or (at your option)
+ any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ It is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
16, 17, 2, 3, 4, 5, 6, 7
};
+/* The microMIPS registers with type b. */
+#define micromips_to_32_reg_b_map mips16_to_32_reg_map
+
+/* The microMIPS registers with type c. */
+#define micromips_to_32_reg_c_map mips16_to_32_reg_map
+
+/* The microMIPS registers with type d. */
+#define micromips_to_32_reg_d_map mips16_to_32_reg_map
+
+/* The microMIPS registers with type e. */
+#define micromips_to_32_reg_e_map mips16_to_32_reg_map
+
+/* The microMIPS registers with type f. */
+#define micromips_to_32_reg_f_map mips16_to_32_reg_map
+
+/* The microMIPS registers with type g. */
+#define micromips_to_32_reg_g_map mips16_to_32_reg_map
+
+/* The microMIPS registers with type h. */
+static const unsigned int micromips_to_32_reg_h_map[] =
+{
+ 5, 5, 6, 4, 4, 4, 4, 4
+};
+
+/* The microMIPS registers with type i. */
+static const unsigned int micromips_to_32_reg_i_map[] =
+{
+ 6, 7, 7, 21, 22, 5, 6, 7
+};
+
+/* The microMIPS registers with type j: 32 registers. */
+
+/* The microMIPS registers with type l. */
+#define micromips_to_32_reg_l_map mips16_to_32_reg_map
+
+/* The microMIPS registers with type m. */
+static const unsigned int micromips_to_32_reg_m_map[] =
+{
+ 0, 17, 2, 3, 16, 18, 19, 20
+};
+
+/* The microMIPS registers with type n. */
+#define micromips_to_32_reg_n_map micromips_to_32_reg_m_map
+
+/* The microMIPS registers with type p: 32 registers. */
+
+/* The microMIPS registers with type q. */
+static const unsigned int micromips_to_32_reg_q_map[] =
+{
+ 0, 17, 2, 3, 4, 5, 6, 7
+};
+
+/* reg type s is $29. */
+
+/* reg type t is the same as the last register. */
+
+/* reg type y is $31. */
+
+/* reg type z is $0. */
+
+/* micromips imm B type. */
+static const int micromips_imm_b_map[8] =
+{
+ 1, 4, 8, 12, 16, 20, 24, -1
+};
+
+/* micromips imm C type. */
+static const int micromips_imm_c_map[16] =
+{
+ 128, 1, 2, 3, 4, 7, 8, 15, 16, 31, 32, 63, 64, 255, 32768, 65535
+};
+
+/* micromips imm D type: (-512..511)<<1. */
+/* micromips imm E type: (-64..63)<<1. */
+/* micromips imm F type: (0..63). */
+/* micromips imm G type: (-1..14). */
+/* micromips imm H type: (0..15)<<1. */
+/* micromips imm I type: (-1..126). */
+/* micromips imm J type: (0..15)<<2. */
+/* micromips imm L type: (0..15). */
+/* micromips imm M type: (1..8). */
+/* micromips imm W type: (0..63)<<2. */
+/* micromips imm X type: (-8..7). */
+/* micromips imm Y type: (-258..-3, 2..257)<<2. */
+
#define mips16_reg_names(rn) mips_gpr_names[mips16_to_32_reg_map[rn]]
"$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31"
};
+static const char * const mips_cp0_names_r3000[32] =
+{
+ "c0_index", "c0_random", "c0_entrylo", "$3",
+ "c0_context", "$5", "$6", "$7",
+ "c0_badvaddr", "$9", "c0_entryhi", "$11",
+ "c0_sr", "c0_cause", "c0_epc", "c0_prid",
+ "$16", "$17", "$18", "$19",
+ "$20", "$21", "$22", "$23",
+ "$24", "$25", "$26", "$27",
+ "$28", "$29", "$30", "$31",
+};
+
+static const char * const mips_cp0_names_r4000[32] =
+{
+ "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1",
+ "c0_context", "c0_pagemask", "c0_wired", "$7",
+ "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare",
+ "c0_sr", "c0_cause", "c0_epc", "c0_prid",
+ "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi",
+ "c0_xcontext", "$21", "$22", "$23",
+ "$24", "$25", "c0_ecc", "c0_cacheerr",
+ "c0_taglo", "c0_taghi", "c0_errorepc", "$31",
+};
+
static const char * const mips_cp0_names_mips3264[32] =
{
"c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1",
static const struct mips_cp0sel_name mips_cp0sel_names_mips3264r2[] =
{
{ 4, 1, "c0_contextconfig" },
+ { 0, 1, "c0_mvpcontrol" },
+ { 0, 2, "c0_mvpconf0" },
+ { 0, 3, "c0_mvpconf1" },
+ { 1, 1, "c0_vpecontrol" },
+ { 1, 2, "c0_vpeconf0" },
+ { 1, 3, "c0_vpeconf1" },
+ { 1, 4, "c0_yqmask" },
+ { 1, 5, "c0_vpeschedule" },
+ { 1, 6, "c0_vpeschefback" },
+ { 2, 1, "c0_tcstatus" },
+ { 2, 2, "c0_tcbind" },
+ { 2, 3, "c0_tcrestart" },
+ { 2, 4, "c0_tchalt" },
+ { 2, 5, "c0_tccontext" },
+ { 2, 6, "c0_tcschedule" },
+ { 2, 7, "c0_tcschefback" },
{ 5, 1, "c0_pagegrain" },
+ { 6, 1, "c0_srsconf0" },
+ { 6, 2, "c0_srsconf1" },
+ { 6, 3, "c0_srsconf2" },
+ { 6, 4, "c0_srsconf3" },
+ { 6, 5, "c0_srsconf4" },
{ 12, 1, "c0_intctl" },
{ 12, 2, "c0_srsctl" },
{ 12, 3, "c0_srsmap" },
{ 29, 3, "c0_datahi_d" },
};
+/* Xlr cop0 register names. */
+static const char * const mips_cp0_names_xlr[32] = {
+ "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1",
+ "c0_context", "c0_pagemask", "c0_wired", "$7",
+ "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare",
+ "c0_status", "c0_cause", "c0_epc", "c0_prid",
+ "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi",
+ "c0_xcontext", "$21", "$22", "c0_debug",
+ "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr_i",
+ "c0_taglo_i", "c0_taghi_i", "c0_errorepc", "c0_desave",
+};
+
+/* XLR's CP0 Select Registers. */
+
+static const struct mips_cp0sel_name mips_cp0sel_names_xlr[] = {
+ { 9, 6, "c0_extintreq" },
+ { 9, 7, "c0_extintmask" },
+ { 15, 1, "c0_ebase" },
+ { 16, 1, "c0_config1" },
+ { 16, 2, "c0_config2" },
+ { 16, 3, "c0_config3" },
+ { 16, 7, "c0_procid2" },
+ { 18, 1, "c0_watchlo,1" },
+ { 18, 2, "c0_watchlo,2" },
+ { 18, 3, "c0_watchlo,3" },
+ { 18, 4, "c0_watchlo,4" },
+ { 18, 5, "c0_watchlo,5" },
+ { 18, 6, "c0_watchlo,6" },
+ { 18, 7, "c0_watchlo,7" },
+ { 19, 1, "c0_watchhi,1" },
+ { 19, 2, "c0_watchhi,2" },
+ { 19, 3, "c0_watchhi,3" },
+ { 19, 4, "c0_watchhi,4" },
+ { 19, 5, "c0_watchhi,5" },
+ { 19, 6, "c0_watchhi,6" },
+ { 19, 7, "c0_watchhi,7" },
+ { 25, 1, "c0_perfcnt,1" },
+ { 25, 2, "c0_perfcnt,2" },
+ { 25, 3, "c0_perfcnt,3" },
+ { 25, 4, "c0_perfcnt,4" },
+ { 25, 5, "c0_perfcnt,5" },
+ { 25, 6, "c0_perfcnt,6" },
+ { 25, 7, "c0_perfcnt,7" },
+ { 27, 1, "c0_cacheerr,1" },
+ { 27, 2, "c0_cacheerr,2" },
+ { 27, 3, "c0_cacheerr,3" },
+ { 28, 1, "c0_datalo" },
+ { 29, 1, "c0_datahi" }
+};
+
static const char * const mips_hwr_names_numeric[32] =
{
"$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7",
mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
{ "r3000", 1, bfd_mach_mips3000, CPU_R3000, ISA_MIPS1,
- mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ mips_cp0_names_r3000, NULL, 0, mips_hwr_names_numeric },
{ "r3900", 1, bfd_mach_mips3900, CPU_R3900, ISA_MIPS1,
mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
{ "r4000", 1, bfd_mach_mips4000, CPU_R4000, ISA_MIPS3,
- mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ mips_cp0_names_r4000, NULL, 0, mips_hwr_names_numeric },
{ "r4010", 1, bfd_mach_mips4010, CPU_R4010, ISA_MIPS2,
mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
{ "vr4100", 1, bfd_mach_mips4100, CPU_VR4100, ISA_MIPS3,
{ "r4300", 1, bfd_mach_mips4300, CPU_R4300, ISA_MIPS3,
mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
{ "r4400", 1, bfd_mach_mips4400, CPU_R4400, ISA_MIPS3,
- mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ mips_cp0_names_r4000, NULL, 0, mips_hwr_names_numeric },
{ "r4600", 1, bfd_mach_mips4600, CPU_R4600, ISA_MIPS3,
mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
{ "r4650", 1, bfd_mach_mips4650, CPU_R4650, ISA_MIPS3,
mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
{ "r12000", 1, bfd_mach_mips12000, CPU_R12000, ISA_MIPS4,
mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r14000", 1, bfd_mach_mips14000, CPU_R14000, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r16000", 1, bfd_mach_mips16000, CPU_R16000, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
{ "mips5", 1, bfd_mach_mips5, CPU_MIPS5, ISA_MIPS5,
mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
MIPS32 Architecture_ (MIPS Document Number MD00082, Revision 0.95),
page 1. */
{ "mips32", 1, bfd_mach_mipsisa32, CPU_MIPS32,
- ISA_MIPS32 | INSN_MIPS16 | INSN_DSP,
+ ISA_MIPS32 | INSN_SMARTMIPS,
mips_cp0_names_mips3264,
mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264),
mips_hwr_names_numeric },
{ "mips32r2", 1, bfd_mach_mipsisa32r2, CPU_MIPS32R2,
- ISA_MIPS32R2 | INSN_MIPS16 | INSN_DSP | INSN_MT,
+ (ISA_MIPS32R2 | INSN_SMARTMIPS | INSN_DSP | INSN_DSPR2
+ | INSN_MIPS3D | INSN_MT | INSN_MCU),
mips_cp0_names_mips3264r2,
mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2),
mips_hwr_names_mips3264r2 },
/* For stock MIPS64, disassemble all applicable MIPS-specified ASEs. */
{ "mips64", 1, bfd_mach_mipsisa64, CPU_MIPS64,
- ISA_MIPS64 | INSN_MIPS16 | INSN_MIPS3D | INSN_MDMX | INSN_DSP,
+ ISA_MIPS64 | INSN_MIPS3D | INSN_MDMX,
mips_cp0_names_mips3264,
mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264),
mips_hwr_names_numeric },
{ "mips64r2", 1, bfd_mach_mipsisa64r2, CPU_MIPS64R2,
- ISA_MIPS64R2 | INSN_MIPS16 | INSN_MIPS3D | INSN_MDMX | INSN_DSP,
+ (ISA_MIPS64R2 | INSN_MIPS3D | INSN_DSP | INSN_DSPR2
+ | INSN_DSP64 | INSN_MT | INSN_MDMX | INSN_MCU),
mips_cp0_names_mips3264r2,
mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2),
mips_hwr_names_mips3264r2 },
mips_cp0sel_names_sb1, ARRAY_SIZE (mips_cp0sel_names_sb1),
mips_hwr_names_numeric },
+ { "loongson2e", 1, bfd_mach_mips_loongson_2e, CPU_LOONGSON_2E,
+ ISA_MIPS3 | INSN_LOONGSON_2E, mips_cp0_names_numeric,
+ NULL, 0, mips_hwr_names_numeric },
+
+ { "loongson2f", 1, bfd_mach_mips_loongson_2f, CPU_LOONGSON_2F,
+ ISA_MIPS3 | INSN_LOONGSON_2F, mips_cp0_names_numeric,
+ NULL, 0, mips_hwr_names_numeric },
+
+ { "loongson3a", 1, bfd_mach_mips_loongson_3a, CPU_LOONGSON_3A,
+ ISA_MIPS64 | INSN_LOONGSON_3A, mips_cp0_names_numeric,
+ NULL, 0, mips_hwr_names_numeric },
+
+ { "octeon", 1, bfd_mach_mips_octeon, CPU_OCTEON,
+ ISA_MIPS64R2 | INSN_OCTEON, mips_cp0_names_numeric, NULL, 0,
+ mips_hwr_names_numeric },
+
+ { "octeon+", 1, bfd_mach_mips_octeonp, CPU_OCTEONP,
+ ISA_MIPS64R2 | INSN_OCTEONP, mips_cp0_names_numeric,
+ NULL, 0, mips_hwr_names_numeric },
+
+ { "octeon2", 1, bfd_mach_mips_octeon2, CPU_OCTEON2,
+ ISA_MIPS64R2 | INSN_OCTEON2, mips_cp0_names_numeric,
+ NULL, 0, mips_hwr_names_numeric },
+
+ { "xlr", 1, bfd_mach_mips_xlr, CPU_XLR,
+ ISA_MIPS64 | INSN_XLR,
+ mips_cp0_names_xlr,
+ mips_cp0sel_names_xlr, ARRAY_SIZE (mips_cp0sel_names_xlr),
+ mips_hwr_names_numeric },
+
/* This entry, mips16, is here only for ISA/processor selection; do
not print its name. */
- { "", 1, bfd_mach_mips16, CPU_MIPS16, ISA_MIPS3 | INSN_MIPS16,
+ { "", 1, bfd_mach_mips16, CPU_MIPS16, ISA_MIPS3,
mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
};
values. */
static int mips_processor;
static int mips_isa;
+static int micromips_ase;
static const char * const *mips_gpr_names;
static const char * const *mips_fpr_names;
static const char * const *mips_cp0_names;
return 0;
}
+/* Check if the object has microMIPS ASE code. */
+
+static int
+is_micromips (Elf_Internal_Ehdr *header)
+{
+ if ((header->e_flags & EF_MIPS_ARCH_ASE_MICROMIPS) != 0)
+ return 1;
+
+ return 0;
+}
+
static void
set_default_mips_dis_options (struct disassemble_info *info)
{
const struct mips_arch_choice *chosen_arch;
- /* Defaults: mipsIII/r3000 (?!), (o)32-style ("oldabi") GPR names,
- and numeric FPR, CP0 register, and HWR names. */
+ /* Defaults: mipsIII/r3000 (?!), no microMIPS ASE (any compressed code
+ is MIPS16 ASE) (o)32-style ("oldabi") GPR names, and numeric FPR,
+ CP0 register, and HWR names. */
mips_isa = ISA_MIPS3;
- mips_processor = CPU_R3000;
+ mips_processor = CPU_R3000;
+ micromips_ase = 0;
mips_gpr_names = mips_gpr_names_oldabi;
mips_fpr_names = mips_fpr_names_numeric;
mips_cp0_names = mips_cp0_names_numeric;
mips_hwr_names = mips_hwr_names_numeric;
no_aliases = 0;
- /* If an ELF "newabi" binary, use the n32/(n)64 GPR names. */
+ /* Update settings according to the ELF file header flags. */
if (info->flavour == bfd_target_elf_flavour && info->section != NULL)
{
Elf_Internal_Ehdr *header;
header = elf_elfheader (info->section->owner);
+ /* If an ELF "newabi" binary, use the n32/(n)64 GPR names. */
if (is_newabi (header))
mips_gpr_names = mips_gpr_names_newabi;
+ /* If a microMIPS binary, then don't use MIPS16 bindings. */
+ micromips_ase = is_micromips (header);
}
/* Set ISA, architecture, and cp0 register names as best we can. */
const struct mips_arch_choice *chosen_arch;
/* Try to match options that are simple flags */
- if (strncmp (option, "no-aliases", 10) == 0)
+ if (CONST_STRNEQ (option, "no-aliases"))
{
no_aliases = 1;
return;
print_insn_args (const char *d,
register unsigned long int l,
bfd_vma pc,
- struct disassemble_info *info)
+ struct disassemble_info *info,
+ const struct mips_opcode *opp)
{
int op, delta;
unsigned int lsb, msb, msbd;
(*info->fprintf_func) (info->stream, "0x%x", msb - lsb + 1);
break;
+ case '1':
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_UDI1) & OP_MASK_UDI1);
+ break;
+
+ case '2':
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_UDI2) & OP_MASK_UDI2);
+ break;
+
+ case '3':
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_UDI3) & OP_MASK_UDI3);
+ break;
+
+ case '4':
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_UDI4) & OP_MASK_UDI4);
+ break;
+
case 'C':
case 'H':
msbd = (l >> OP_SH_EXTMSBD) & OP_MASK_EXTMSBD;
break;
}
+ case 'x': /* bbit bit index */
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_BBITIND) & OP_MASK_BBITIND);
+ break;
+
+ case 'p': /* cins, cins32, exts and exts32 position */
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_CINSPOS) & OP_MASK_CINSPOS);
+ break;
+
+ case 's': /* cins and exts length-minus-one */
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_CINSLM1) & OP_MASK_CINSLM1);
+ break;
+
+ case 'S': /* cins32 and exts32 length-minus-one field */
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_CINSLM1) & OP_MASK_CINSLM1);
+ break;
+
+ case 'Q': /* seqi/snei immediate field */
+ op = (l >> OP_SH_SEQI) & OP_MASK_SEQI;
+ /* Sign-extend it. */
+ op = (op ^ 512) - 512;
+ (*info->fprintf_func) (info->stream, "%d", op);
+ break;
+
+ case 'a': /* 8-bit signed offset in bit 6 */
+ delta = (l >> OP_SH_OFFSET_A) & OP_MASK_OFFSET_A;
+ if (delta & 0x80)
+ delta |= ~OP_MASK_OFFSET_A;
+ (*info->fprintf_func) (info->stream, "%d", delta);
+ break;
+
+ case 'b': /* 8-bit signed offset in bit 3 */
+ delta = (l >> OP_SH_OFFSET_B) & OP_MASK_OFFSET_B;
+ if (delta & 0x80)
+ delta |= ~OP_MASK_OFFSET_B;
+ (*info->fprintf_func) (info->stream, "%d", delta);
+ break;
+
+ case 'c': /* 9-bit signed offset in bit 6 */
+ delta = (l >> OP_SH_OFFSET_C) & OP_MASK_OFFSET_C;
+ if (delta & 0x100)
+ delta |= ~OP_MASK_OFFSET_C;
+ /* Left shift 4 bits to print the real offset. */
+ (*info->fprintf_func) (info->stream, "%d", delta << 4);
+ break;
+
+ case 'z':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_gpr_names[(l >> OP_SH_RZ) & OP_MASK_RZ]);
+ break;
+
+ case 'Z':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_fpr_names[(l >> OP_SH_FZ) & OP_MASK_FZ]);
+ break;
+
default:
/* xgettext:c-format */
(*info->fprintf_func) (info->stream,
}
break;
+ case '2':
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_BP) & OP_MASK_BP);
+ break;
+
case '3':
(*info->fprintf_func) (info->stream, "0x%lx",
(l >> OP_SH_SA3) & OP_MASK_SA3);
(*info->fprintf_func) (info->stream, "%d", delta);
break;
+ case '~':
+ delta = (l >> OP_SH_OFFSET12) & OP_MASK_OFFSET12;
+ if (delta & 0x800)
+ delta |= ~0x7ff;
+ (*info->fprintf_func) (info->stream, "%d", delta);
+ break;
+
+ case '\\':
+ (*info->fprintf_func) (info->stream, "0x%lx",
+ (l >> OP_SH_3BITPOS) & OP_MASK_3BITPOS);
+ break;
+
case '\'':
(*info->fprintf_func) (info->stream, "0x%lx",
(l >> OP_SH_RDDSP) & OP_MASK_RDDSP);
case 'a':
info->target = (((pc + 4) & ~(bfd_vma) 0x0fffffff)
| (((l >> OP_SH_TARGET) & OP_MASK_TARGET) << 2));
+ /* For gdb disassembler, force odd address on jalx. */
+ if (info->flavour == bfd_target_unknown_flavour
+ && strcmp (opp->name, "jalx") == 0)
+ info->target |= 1;
(*info->print_address_func) (info->target, info);
break;
break;
case '<':
+ case '1':
(*info->fprintf_func) (info->stream, "0x%lx",
(l >> OP_SH_SHAMT) & OP_MASK_SHAMT);
break;
break;
case 'N':
- (*info->fprintf_func) (info->stream, "$fcc%ld",
+ (*info->fprintf_func) (info->stream,
+ ((opp->pinfo & (FP_D | FP_S)) != 0
+ ? "$fcc%ld" : "$cc%ld"),
(l >> OP_SH_BCC) & OP_MASK_BCC);
break;
default:
/* xgettext:c-format */
(*info->fprintf_func) (info->stream,
- _("# internal error, undefined modifier(%c)"),
+ _("# internal error, undefined modifier (%c)"),
*d);
return;
}
/* Figure out instruction type and branch delay information. */
if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0)
{
- if ((info->insn_type & INSN_WRITE_GPR_31) != 0)
+ if ((op->pinfo & (INSN_WRITE_GPR_31
+ | INSN_WRITE_GPR_D)) != 0)
info->insn_type = dis_jsr;
else
info->insn_type = dis_branch;
else if ((op->pinfo & (INSN_COND_BRANCH_DELAY
| INSN_COND_BRANCH_LIKELY)) != 0)
{
- if ((info->insn_type & INSN_WRITE_GPR_31) != 0)
+ if ((op->pinfo & INSN_WRITE_GPR_31) != 0)
info->insn_type = dis_condjsr;
else
info->insn_type = dis_condbranch;
if (d != NULL && *d != '\0')
{
(*info->fprintf_func) (info->stream, "\t");
- print_insn_args (d, word, memaddr, info);
+ print_insn_args (d, word, memaddr, info, op);
}
return INSNLEN;
signedp = 1;
pcrel = 1;
branch = 1;
- info->insn_type = dis_condbranch;
break;
case 'q':
nbits = 11;
signedp = 1;
pcrel = 1;
branch = 1;
- info->insn_type = dis_branch;
break;
case 'A':
nbits = 8;
}
}
info->target = (baseaddr & ~((1 << shift) - 1)) + immed;
+ if (pcrel && branch
+ && info->flavour == bfd_target_unknown_flavour)
+ /* For gdb disassembler, maintain odd address. */
+ info->target |= 1;
(*info->print_address_func) (info->target, info);
}
}
break;
case 'a':
- if (! use_extend)
- extend = 0;
- l = ((l & 0x1f) << 23) | ((l & 0x3e0) << 13) | (extend << 2);
+ {
+ int jalx = l & 0x400;
+
+ if (! use_extend)
+ extend = 0;
+ l = ((l & 0x1f) << 23) | ((l & 0x3e0) << 13) | (extend << 2);
+ if (!jalx && info->flavour == bfd_target_unknown_flavour)
+ /* For gdb disassembler, maintain odd address. */
+ l |= 1;
+ }
info->target = ((memaddr + 4) & ~(bfd_vma) 0x0fffffff) | l;
(*info->print_address_func) (info->target, info);
- info->insn_type = dis_jsr;
- info->branch_delay_insns = 1;
break;
case 'l':
info);
}
+ /* Figure out branch instruction type and delay slot information. */
if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0)
+ info->branch_delay_insns = 1;
+ if ((op->pinfo & (INSN_UNCOND_BRANCH_DELAY
+ | MIPS16_INSN_UNCOND_BRANCH)) != 0)
{
- info->branch_delay_insns = 1;
- if (info->insn_type != dis_jsr)
+ if ((op->pinfo & INSN_WRITE_GPR_31) != 0)
+ info->insn_type = dis_jsr;
+ else
info->insn_type = dis_branch;
}
+ else if ((op->pinfo & MIPS16_INSN_COND_BRANCH) != 0)
+ info->insn_type = dis_condbranch;
return length;
}
return length;
}
+/* Disassemble microMIPS instructions. */
+
+static int
+print_insn_micromips (bfd_vma memaddr, struct disassemble_info *info)
+{
+ const fprintf_ftype infprintf = info->fprintf_func;
+ const struct mips_opcode *op, *opend;
+ unsigned int lsb, msbd, msb;
+ void *is = info->stream;
+ unsigned int regno;
+ bfd_byte buffer[2];
+ int lastregno = 0;
+ int higher;
+ int length;
+ int status;
+ int delta;
+ int immed;
+ int insn;
+
+ lsb = 0;
+
+ info->bytes_per_chunk = 2;
+ info->display_endian = info->endian;
+ info->insn_info_valid = 1;
+ info->branch_delay_insns = 0;
+ info->data_size = 0;
+ info->insn_type = dis_nonbranch;
+ info->target = 0;
+ info->target2 = 0;
+
+ status = (*info->read_memory_func) (memaddr, buffer, 2, info);
+ if (status != 0)
+ {
+ (*info->memory_error_func) (status, memaddr, info);
+ return -1;
+ }
+
+ length = 2;
+
+ if (info->endian == BFD_ENDIAN_BIG)
+ insn = bfd_getb16 (buffer);
+ else
+ insn = bfd_getl16 (buffer);
+
+ if ((insn & 0xfc00) == 0x7c00)
+ {
+ /* This is a 48-bit microMIPS instruction. */
+ higher = insn;
+
+ status = (*info->read_memory_func) (memaddr + 2, buffer, 2, info);
+ if (status != 0)
+ {
+ infprintf (is, "micromips 0x%x", higher);
+ (*info->memory_error_func) (status, memaddr + 2, info);
+ return -1;
+ }
+ if (info->endian == BFD_ENDIAN_BIG)
+ insn = bfd_getb16 (buffer);
+ else
+ insn = bfd_getl16 (buffer);
+ higher = (higher << 16) | insn;
+
+ status = (*info->read_memory_func) (memaddr + 4, buffer, 2, info);
+ if (status != 0)
+ {
+ infprintf (is, "micromips 0x%x", higher);
+ (*info->memory_error_func) (status, memaddr + 4, info);
+ return -1;
+ }
+ if (info->endian == BFD_ENDIAN_BIG)
+ insn = bfd_getb16 (buffer);
+ else
+ insn = bfd_getl16 (buffer);
+ infprintf (is, "0x%x%04x (48-bit insn)", higher, insn);
+
+ info->insn_type = dis_noninsn;
+ return 6;
+ }
+ else if ((insn & 0x1c00) == 0x0000 || (insn & 0x1000) == 0x1000)
+ {
+ /* This is a 32-bit microMIPS instruction. */
+ higher = insn;
+
+ status = (*info->read_memory_func) (memaddr + 2, buffer, 2, info);
+ if (status != 0)
+ {
+ infprintf (is, "micromips 0x%x", higher);
+ (*info->memory_error_func) (status, memaddr + 2, info);
+ return -1;
+ }
+
+ if (info->endian == BFD_ENDIAN_BIG)
+ insn = bfd_getb16 (buffer);
+ else
+ insn = bfd_getl16 (buffer);
+
+ insn = insn | (higher << 16);
+
+ length += 2;
+ }
+
+ /* FIXME: Should probably use a hash table on the major opcode here. */
+
+#define GET_OP(insn, field) \
+ (((insn) >> MICROMIPSOP_SH_##field) & MICROMIPSOP_MASK_##field)
+ opend = micromips_opcodes + bfd_micromips_num_opcodes;
+ for (op = micromips_opcodes; op < opend; op++)
+ {
+ if (op->pinfo != INSN_MACRO
+ && !(no_aliases && (op->pinfo2 & INSN2_ALIAS))
+ && (insn & op->mask) == op->match
+ && ((length == 2 && (op->mask & 0xffff0000) == 0)
+ || (length == 4 && (op->mask & 0xffff0000) != 0)))
+ {
+ const char *s;
+
+ infprintf (is, "%s", op->name);
+ if (op->args[0] != '\0')
+ infprintf (is, "\t");
+
+ for (s = op->args; *s != '\0'; s++)
+ {
+ switch (*s)
+ {
+ case ',':
+ case '(':
+ case ')':
+ infprintf (is, "%c", *s);
+ break;
+
+ case '.':
+ delta = GET_OP (insn, OFFSET10);
+ if (delta & 0x200)
+ delta |= ~0x3ff;
+ infprintf (is, "%d", delta);
+ break;
+
+ case '1':
+ infprintf (is, "0x%lx", GET_OP (insn, STYPE));
+ break;
+
+ case '<':
+ infprintf (is, "0x%lx", GET_OP (insn, SHAMT));
+ break;
+
+ case '\\':
+ infprintf (is, "0x%lx", GET_OP (insn, 3BITPOS));
+ break;
+
+ case '|':
+ infprintf (is, "0x%lx", GET_OP (insn, TRAP));
+ break;
+
+ case '~':
+ delta = GET_OP (insn, OFFSET12);
+ if (delta & 0x800)
+ delta |= ~0x7ff;
+ infprintf (is, "%d", delta);
+ break;
+
+ case 'a':
+ if (strcmp (op->name, "jalx") == 0)
+ info->target = (((memaddr + 4) & ~(bfd_vma) 0x0fffffff)
+ | (GET_OP (insn, TARGET) << 2));
+ else
+ info->target = (((memaddr + 4) & ~(bfd_vma) 0x07ffffff)
+ | ((GET_OP (insn, TARGET)) << 1));
+ /* For gdb disassembler, force odd address on jalx. */
+ if (info->flavour == bfd_target_unknown_flavour
+ && strcmp (op->name, "jalx") == 0)
+ info->target |= 1;
+ (*info->print_address_func) (info->target, info);
+ break;
+
+ case 'b':
+ case 'r':
+ case 's':
+ case 'v':
+ infprintf (is, "%s", mips_gpr_names[GET_OP (insn, RS)]);
+ break;
+
+ case 'c':
+ infprintf (is, "0x%lx", GET_OP (insn, CODE));
+ break;
+
+ case 'd':
+ infprintf (is, "%s", mips_gpr_names[GET_OP (insn, RD)]);
+ break;
+
+ case 'h':
+ infprintf (is, "0x%lx", GET_OP (insn, PREFX));
+ break;
+
+ case 'i':
+ case 'u':
+ infprintf (is, "0x%lx", GET_OP (insn, IMMEDIATE));
+ break;
+
+ case 'j': /* Same as i, but sign-extended. */
+ case 'o':
+ delta = (GET_OP (insn, DELTA) ^ 0x8000) - 0x8000;
+ infprintf (is, "%d", delta);
+ break;
+
+ case 'k':
+ infprintf (is, "0x%x", GET_OP (insn, CACHE));
+ break;
+
+ case 'n':
+ {
+ int s_reg_encode;
+
+ immed = GET_OP (insn, RT);
+ s_reg_encode = immed & 0xf;
+ if (s_reg_encode != 0)
+ {
+ if (s_reg_encode == 1)
+ infprintf (is, "%s", mips_gpr_names[16]);
+ else if (s_reg_encode < 9)
+ infprintf (is, "%s-%s",
+ mips_gpr_names[16],
+ mips_gpr_names[15 + s_reg_encode]);
+ else if (s_reg_encode == 9)
+ infprintf (is, "%s-%s,%s",
+ mips_gpr_names[16],
+ mips_gpr_names[23],
+ mips_gpr_names[30]);
+ else
+ infprintf (is, "UNKNOWN");
+ }
+
+ if (immed & 0x10) /* For ra. */
+ {
+ if (s_reg_encode == 0)
+ infprintf (is, "%s", mips_gpr_names[31]);
+ else
+ infprintf (is, ",%s", mips_gpr_names[31]);
+ }
+ break;
+ }
+
+ case 'p':
+ /* Sign-extend the displacement. */
+ delta = (GET_OP (insn, DELTA) ^ 0x8000) - 0x8000;
+ info->target = (delta << 1) + memaddr + length;
+ (*info->print_address_func) (info->target, info);
+ break;
+
+ case 'q':
+ infprintf (is, "0x%lx", GET_OP (insn, CODE2));
+ break;
+
+ case 't':
+ case 'w':
+ infprintf (is, "%s", mips_gpr_names[GET_OP (insn, RT)]);
+ break;
+
+ case 'y':
+ infprintf (is, "%s", mips_gpr_names[GET_OP (insn, RS3)]);
+ break;
+
+ case 'z':
+ infprintf (is, "%s", mips_gpr_names[0]);
+ break;
+
+ case 'B':
+ infprintf (is, "0x%lx", GET_OP (insn, CODE10));
+ break;
+
+ case 'C':
+ infprintf (is, "0x%lx", GET_OP (insn, COPZ));
+ break;
+
+ case 'D':
+ infprintf (is, "%s", mips_fpr_names[GET_OP (insn, FD)]);
+ break;
+
+ case 'E':
+ /* Coprocessor register for lwcN instructions, et al.
+
+ Note that there is no load/store cp0 instructions, and
+ that FPU (cp1) instructions disassemble this field using
+ 'T' format. Therefore, until we gain understanding of
+ cp2 register names, we can simply print the register
+ numbers. */
+ infprintf (is, "$%ld", GET_OP (insn, RT));
+ break;
+
+ case 'G':
+ /* Coprocessor register for mtcN instructions, et al. Note
+ that FPU (cp1) instructions disassemble this field using
+ 'S' format. Therefore, we only need to worry about cp0,
+ cp2, and cp3.
+ The microMIPS encoding does not have a coprocessor
+ identifier field as such, so we must work out the
+ coprocessor number by looking at the opcode. */
+ switch (insn
+ & ~((MICROMIPSOP_MASK_RT << MICROMIPSOP_SH_RT)
+ | (MICROMIPSOP_MASK_RS << MICROMIPSOP_SH_RS)))
+ {
+ case 0x000000fc: /* mfc0 */
+ case 0x000002fc: /* mtc0 */
+ case 0x580000fc: /* dmfc0 */
+ case 0x580002fc: /* dmtc0 */
+ infprintf (is, "%s", mips_cp0_names[GET_OP (insn, RS)]);
+ break;
+ default:
+ infprintf (is, "$%ld", GET_OP (insn, RS));
+ break;
+ }
+ break;
+
+ case 'H':
+ infprintf (is, "%ld", GET_OP (insn, SEL));
+ break;
+
+ case 'K':
+ infprintf (is, "%s", mips_hwr_names[GET_OP (insn, RS)]);
+ break;
+
+ case 'M':
+ infprintf (is, "$fcc%ld", GET_OP (insn, CCC));
+ break;
+
+ case 'N':
+ infprintf (is,
+ (op->pinfo & (FP_D | FP_S)) != 0
+ ? "$fcc%ld" : "$cc%ld",
+ GET_OP (insn, BCC));
+ break;
+
+ case 'R':
+ infprintf (is, "%s", mips_fpr_names[GET_OP (insn, FR)]);
+ break;
+
+ case 'S':
+ case 'V':
+ infprintf (is, "%s", mips_fpr_names[GET_OP (insn, FS)]);
+ break;
+
+ case 'T':
+ infprintf (is, "%s", mips_fpr_names[GET_OP (insn, FT)]);
+ break;
+
+ case '+':
+ /* Extension character; switch for second char. */
+ s++;
+ switch (*s)
+ {
+ case 'A':
+ lsb = GET_OP (insn, EXTLSB);
+ infprintf (is, "0x%x", lsb);
+ break;
+
+ case 'B':
+ msb = GET_OP (insn, INSMSB);
+ infprintf (is, "0x%x", msb - lsb + 1);
+ break;
+
+ case 'C':
+ case 'H':
+ msbd = GET_OP (insn, EXTMSBD);
+ infprintf (is, "0x%x", msbd + 1);
+ break;
+
+ case 'D':
+ {
+ const struct mips_cp0sel_name *n;
+ unsigned int cp0reg, sel;
+
+ cp0reg = GET_OP (insn, RS);
+ sel = GET_OP (insn, SEL);
+
+ /* CP0 register including 'sel' code for mtcN
+ (et al.), to be printed textually if known.
+ If not known, print both CP0 register name and
+ sel numerically since CP0 register with sel 0 may
+ have a name unrelated to register being printed. */
+ n = lookup_mips_cp0sel_name (mips_cp0sel_names,
+ mips_cp0sel_names_len,
+ cp0reg, sel);
+ if (n != NULL)
+ infprintf (is, "%s", n->name);
+ else
+ infprintf (is, "$%d,%d", cp0reg, sel);
+ break;
+ }
+
+ case 'E':
+ lsb = GET_OP (insn, EXTLSB) + 32;
+ infprintf (is, "0x%x", lsb);
+ break;
+
+ case 'F':
+ msb = GET_OP (insn, INSMSB) + 32;
+ infprintf (is, "0x%x", msb - lsb + 1);
+ break;
+
+ case 'G':
+ msbd = GET_OP (insn, EXTMSBD) + 32;
+ infprintf (is, "0x%x", msbd + 1);
+ break;
+
+ default:
+ /* xgettext:c-format */
+ infprintf (is,
+ _("# internal disassembler error, "
+ "unrecognized modifier (+%c)"),
+ *s);
+ abort ();
+ }
+ break;
+
+ case 'm':
+ /* Extension character; switch for second char. */
+ s++;
+ switch (*s)
+ {
+ case 'a': /* global pointer. */
+ infprintf (is, "%s", mips_gpr_names[28]);
+ break;
+
+ case 'b':
+ regno = micromips_to_32_reg_b_map[GET_OP (insn, MB)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'c':
+ regno = micromips_to_32_reg_c_map[GET_OP (insn, MC)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'd':
+ regno = micromips_to_32_reg_d_map[GET_OP (insn, MD)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'e':
+ regno = micromips_to_32_reg_e_map[GET_OP (insn, ME)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'f':
+ /* Save lastregno for "mt" to print out later. */
+ lastregno = micromips_to_32_reg_f_map[GET_OP (insn, MF)];
+ infprintf (is, "%s", mips_gpr_names[lastregno]);
+ break;
+
+ case 'g':
+ regno = micromips_to_32_reg_g_map[GET_OP (insn, MG)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'h':
+ regno = micromips_to_32_reg_h_map[GET_OP (insn, MH)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'i':
+ regno = micromips_to_32_reg_i_map[GET_OP (insn, MI)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'j':
+ infprintf (is, "%s", mips_gpr_names[GET_OP (insn, MJ)]);
+ break;
+
+ case 'l':
+ regno = micromips_to_32_reg_l_map[GET_OP (insn, ML)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'm':
+ regno = micromips_to_32_reg_m_map[GET_OP (insn, MM)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'n':
+ regno = micromips_to_32_reg_n_map[GET_OP (insn, MN)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'p':
+ /* Save lastregno for "mt" to print out later. */
+ lastregno = GET_OP (insn, MP);
+ infprintf (is, "%s", mips_gpr_names[lastregno]);
+ break;
+
+ case 'q':
+ regno = micromips_to_32_reg_q_map[GET_OP (insn, MQ)];
+ infprintf (is, "%s", mips_gpr_names[regno]);
+ break;
+
+ case 'r': /* program counter. */
+ infprintf (is, "$pc");
+ break;
+
+ case 's': /* stack pointer. */
+ lastregno = 29;
+ infprintf (is, "%s", mips_gpr_names[29]);
+ break;
+
+ case 't':
+ infprintf (is, "%s", mips_gpr_names[lastregno]);
+ break;
+
+ case 'z': /* $0. */
+ infprintf (is, "%s", mips_gpr_names[0]);
+ break;
+
+ case 'A':
+ /* Sign-extend the immediate. */
+ immed = ((GET_OP (insn, IMMA) ^ 0x40) - 0x40) << 2;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'B':
+ immed = micromips_imm_b_map[GET_OP (insn, IMMB)];
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'C':
+ immed = micromips_imm_c_map[GET_OP (insn, IMMC)];
+ infprintf (is, "0x%lx", immed);
+ break;
+
+ case 'D':
+ /* Sign-extend the displacement. */
+ delta = (GET_OP (insn, IMMD) ^ 0x200) - 0x200;
+ info->target = (delta << 1) + memaddr + length;
+ (*info->print_address_func) (info->target, info);
+ break;
+
+ case 'E':
+ /* Sign-extend the displacement. */
+ delta = (GET_OP (insn, IMME) ^ 0x40) - 0x40;
+ info->target = (delta << 1) + memaddr + length;
+ (*info->print_address_func) (info->target, info);
+ break;
+
+ case 'F':
+ immed = GET_OP (insn, IMMF);
+ infprintf (is, "0x%x", immed);
+ break;
+
+ case 'G':
+ immed = (insn >> MICROMIPSOP_SH_IMMG) + 1;
+ immed = (immed & MICROMIPSOP_MASK_IMMG) - 1;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'H':
+ immed = GET_OP (insn, IMMH) << 1;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'I':
+ immed = (insn >> MICROMIPSOP_SH_IMMI) + 1;
+ immed = (immed & MICROMIPSOP_MASK_IMMI) - 1;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'J':
+ immed = GET_OP (insn, IMMJ) << 2;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'L':
+ immed = GET_OP (insn, IMML);
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'M':
+ immed = (insn >> MICROMIPSOP_SH_IMMM) - 1;
+ immed = (immed & MICROMIPSOP_MASK_IMMM) + 1;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'N':
+ immed = GET_OP (insn, IMMN);
+ if (immed == 0)
+ infprintf (is, "%s,%s",
+ mips_gpr_names[16],
+ mips_gpr_names[31]);
+ else
+ infprintf (is, "%s-%s,%s",
+ mips_gpr_names[16],
+ mips_gpr_names[16 + immed],
+ mips_gpr_names[31]);
+ break;
+
+ case 'O':
+ immed = GET_OP (insn, IMMO);
+ infprintf (is, "0x%x", immed);
+ break;
+
+ case 'P':
+ immed = GET_OP (insn, IMMP) << 2;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'Q':
+ /* Sign-extend the immediate. */
+ immed = (GET_OP (insn, IMMQ) ^ 0x400000) - 0x400000;
+ immed <<= 2;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'U':
+ immed = GET_OP (insn, IMMU) << 2;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'W':
+ immed = GET_OP (insn, IMMW) << 2;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'X':
+ /* Sign-extend the immediate. */
+ immed = (GET_OP (insn, IMMX) ^ 0x8) - 0x8;
+ infprintf (is, "%d", immed);
+ break;
+
+ case 'Y':
+ /* Sign-extend the immediate. */
+ immed = (GET_OP (insn, IMMY) ^ 0x100) - 0x100;
+ if (immed >= -2 && immed <= 1)
+ immed ^= 0x100;
+ immed = immed << 2;
+ infprintf (is, "%d", immed);
+ break;
+
+ default:
+ /* xgettext:c-format */
+ infprintf (is,
+ _("# internal disassembler error, "
+ "unrecognized modifier (m%c)"),
+ *s);
+ abort ();
+ }
+ break;
+
+ default:
+ /* xgettext:c-format */
+ infprintf (is,
+ _("# internal disassembler error, "
+ "unrecognized modifier (%c)"),
+ *s);
+ abort ();
+ }
+ }
+
+ /* Figure out instruction type and branch delay information. */
+ if ((op->pinfo
+ & (INSN_UNCOND_BRANCH_DELAY | INSN_COND_BRANCH_DELAY)) != 0)
+ info->branch_delay_insns = 1;
+ if (((op->pinfo & INSN_UNCOND_BRANCH_DELAY)
+ | (op->pinfo2 & INSN2_UNCOND_BRANCH)) != 0)
+ {
+ if ((op->pinfo & (INSN_WRITE_GPR_31 | INSN_WRITE_GPR_T)) != 0)
+ info->insn_type = dis_jsr;
+ else
+ info->insn_type = dis_branch;
+ }
+ else if (((op->pinfo & INSN_COND_BRANCH_DELAY)
+ | (op->pinfo2 & INSN2_COND_BRANCH)) != 0)
+ {
+ if ((op->pinfo & INSN_WRITE_GPR_31) != 0)
+ info->insn_type = dis_condjsr;
+ else
+ info->insn_type = dis_condbranch;
+ }
+ else if ((op->pinfo
+ & (INSN_STORE_MEMORY | INSN_LOAD_MEMORY_DELAY)) != 0)
+ info->insn_type = dis_dref;
+
+ return length;
+ }
+ }
+#undef GET_OP
+
+ infprintf (is, "0x%x", insn);
+ info->insn_type = dis_noninsn;
+
+ return length;
+}
+
+/* Return 1 if a symbol associated with the location being disassembled
+ indicates a compressed (MIPS16 or microMIPS) mode. We iterate over
+ all the symbols at the address being considered assuming if at least
+ one of them indicates code compression, then such code has been
+ genuinely produced here (other symbols could have been derived from
+ function symbols defined elsewhere or could define data). Otherwise,
+ return 0. */
+
+static bfd_boolean
+is_compressed_mode_p (struct disassemble_info *info)
+{
+ elf_symbol_type *symbol;
+ int pos;
+ int i;
+
+ for (i = 0; i < info->num_symbols; i++)
+ {
+ pos = info->symtab_pos + i;
+
+ if (bfd_asymbol_flavour (info->symtab[pos]) != bfd_target_elf_flavour)
+ continue;
+
+ symbol = (elf_symbol_type *) info->symtab[pos];
+ if ((!micromips_ase
+ && ELF_ST_IS_MIPS16 (symbol->internal_elf_sym.st_other))
+ || (micromips_ase
+ && ELF_ST_IS_MICROMIPS (symbol->internal_elf_sym.st_other)))
+ return 1;
+ }
+
+ return 0;
+}
+
/* In an environment where we do not know the symbol type of the
instruction we are forced to assume that the low order bit of the
instructions' address may mark it as a mips16 instruction. If we
struct disassemble_info *info,
enum bfd_endian endianness)
{
+ int (*print_insn_compr) (bfd_vma, struct disassemble_info *);
bfd_byte buffer[INSNLEN];
int status;
set_default_mips_dis_options (info);
parse_mips_dis_options (info->disassembler_options);
+ if (info->mach == bfd_mach_mips16)
+ return print_insn_mips16 (memaddr, info);
+ if (info->mach == bfd_mach_mips_micromips)
+ return print_insn_micromips (memaddr, info);
+
+ print_insn_compr = !micromips_ase ? print_insn_mips16 : print_insn_micromips;
+
#if 1
- /* FIXME: If odd address, this is CLEARLY a mips 16 instruction. */
+ /* FIXME: If odd address, this is CLEARLY a compressed instruction. */
/* Only a few tools will work this way. */
if (memaddr & 0x01)
- return print_insn_mips16 (memaddr, info);
+ return print_insn_compr (memaddr, info);
#endif
#if SYMTAB_AVAILABLE
- if (info->mach == bfd_mach_mips16
- || (info->flavour == bfd_target_elf_flavour
- && info->symbols != NULL
- && ((*(elf_symbol_type **) info->symbols)->internal_elf_sym.st_other
- == STO_MIPS16)))
- return print_insn_mips16 (memaddr, info);
+ if (is_compressed_mode_p (info))
+ return print_insn_compr (memaddr, info);
#endif
status = (*info->read_memory_func) (memaddr, buffer, INSNLEN, info);