/* Print mips instructions for GDB, the GNU debugger, or for objdump.
- Copyright 1989, 91-97, 1998 Free Software Foundation, Inc.
+ Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001
+ Free Software Foundation, Inc.
Contributed by Nobuyuki Hikichi(hikichi@sra.co.jp).
This file is part of GDB, GAS, and the GNU binutils.
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-#include <ansidecl.h>
#include "sysdep.h"
#include "dis-asm.h"
#include "opcode/mips.h"
+#include "opintl.h"
-/* FIXME: These are needed to figure out if this is a mips16 symbol or
- not. It would be better to think of a cleaner way to do this. */
+/* FIXME: These are needed to figure out if the code is mips16 or
+ not. The low bit of the address is often a good indicator. No
+ symbol table is available when this code runs out in an embedded
+ system as when it is used for disassembler support in a monitor. */
+
+#if !defined(EMBEDDED_ENV)
+#define SYMTAB_AVAILABLE 1
#include "elf-bfd.h"
#include "elf/mips.h"
+#endif
static int print_insn_mips16 PARAMS ((bfd_vma, struct disassemble_info *));
static void print_mips16_insn_arg
\f
/* FIXME: This should be shared with gdb somehow. */
-#define REGISTER_NAMES \
+#define STD_REGISTER_NAMES \
{ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", \
"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \
"s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \
"epc", "prid"\
}
-static CONST char * CONST reg_names[] = REGISTER_NAMES;
+static CONST char * CONST std_reg_names[] = STD_REGISTER_NAMES;
/* The mips16 register names. */
static const char * const mips16_reg_names[] =
{
"s0", "s1", "v0", "v1", "a0", "a1", "a2", "a3"
};
+
+/* Scalar register names. set_mips_isa_type() decides which register name
+ table to use. */
+static CONST char * CONST *reg_names = NULL;
\f
/* subroutine */
static void
case ',':
case '(':
case ')':
- /* start-sanitize-vr5400 */
- case '[':
- case ']':
- /* end-sanitize-vr5400 */
- /* start-sanitize-r5900 */
- case '+':
- case '-':
- /* end-santiize-r5900 */
(*info->fprintf_func) (info->stream, "%c", *d);
break;
case 'a':
(*info->print_address_func)
- (((pc & 0xF0000000) | (((l >> OP_SH_TARGET) & OP_MASK_TARGET) << 2)),
+ ((((pc + 4) & ~ (bfd_vma) 0x0fffffff)
+ | (((l >> OP_SH_TARGET) & OP_MASK_TARGET) << 2)),
info);
break;
reg_names[(l >> OP_SH_RD) & OP_MASK_RD]);
break;
+ case 'U':
+ {
+ /* First check for both rd and rt being equal. */
+ int reg = (l >> OP_SH_RD) & OP_MASK_RD;
+ if (reg == ((l >> OP_SH_RT) & OP_MASK_RT))
+ (*info->fprintf_func) (info->stream, "$%s",
+ reg_names[reg]);
+ else
+ {
+ /* If one is zero use the other. */
+ if (reg == 0)
+ (*info->fprintf_func) (info->stream, "$%s",
+ reg_names[(l >> OP_SH_RT) & OP_MASK_RT]);
+ else if (((l >> OP_SH_RT) & OP_MASK_RT) == 0)
+ (*info->fprintf_func) (info->stream, "$%s",
+ reg_names[reg]);
+ else /* Bogus, result depends on processor. */
+ (*info->fprintf_func) (info->stream, "$%s or $%s",
+ reg_names[reg],
+ reg_names[(l >> OP_SH_RT) & OP_MASK_RT]);
+ }
+ }
+ break;
+
case 'z':
(*info->fprintf_func) (info->stream, "$%s", reg_names[0]);
break;
(l >> OP_SH_CODE) & OP_MASK_CODE);
break;
+ case 'q':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_CODE2) & OP_MASK_CODE2);
+ break;
+
case 'C':
(*info->fprintf_func) (info->stream, "0x%x",
(l >> OP_SH_COPZ) & OP_MASK_COPZ);
case 'B':
(*info->fprintf_func) (info->stream, "0x%x",
- (l >> OP_SH_SYSCALL) & OP_MASK_SYSCALL);
+ (l >> OP_SH_CODE20) & OP_MASK_CODE20);
break;
- case 'S':
- case 'V':
- (*info->fprintf_func) (info->stream, "$f%d",
- (l >> OP_SH_FS) & OP_MASK_FS);
- break;
-
- /* start-sanitize-r5900
- case '0':
+ case 'J':
(*info->fprintf_func) (info->stream, "0x%x",
- (l >> 6) & 0x1f);
- break;
-
- case '9':
- (*info->fprintf_func) (info->stream, "vi19");
+ (l >> OP_SH_CODE19) & OP_MASK_CODE19);
break;
- case '1':
- (*info->fprintf_func) (info->stream, "vf%d",
- (l >> OP_SH_FT) & OP_MASK_FT);
- break;
- case '2':
- (*info->fprintf_func) (info->stream, "vf%d",
- (l >> OP_SH_FS) & OP_MASK_FS);
- break;
- case '3':
- (*info->fprintf_func) (info->stream, "vf%d",
- (l >> OP_SH_FD) & OP_MASK_FD);
- break;
-
- case '4':
- (*info->fprintf_func) (info->stream, "vi%d",
- (l >> OP_SH_FT) & OP_MASK_FT);
- break;
- case '5':
- (*info->fprintf_func) (info->stream, "vi%d",
+ case 'S':
+ case 'V':
+ (*info->fprintf_func) (info->stream, "$f%d",
(l >> OP_SH_FS) & OP_MASK_FS);
break;
- case '6':
- (*info->fprintf_func) (info->stream, "vi%d",
- (l >> OP_SH_FD) & OP_MASK_FD);
- break;
-
- case '7':
- (*info->fprintf_func) (info->stream, "vf%d",
- (l >> OP_SH_FT) & OP_MASK_FT);
- switch ((l >> 23) & 0x3)
- {
- case 0:
- (*info->fprintf_func) (info->stream, "x");
- break;
- case 1:
- (*info->fprintf_func) (info->stream, "y");
- break;
- case 2:
- (*info->fprintf_func) (info->stream, "z");
- break;
- case 3:
- (*info->fprintf_func) (info->stream, "w");
- break;
- }
- break;
- case 'K':
- break;
-
- case '&':
- (*info->fprintf_func) (info->stream, ".");
- if (l & (1 << 21))
- (*info->fprintf_func) (info->stream, "w");
- if (l & (1 << 24))
- (*info->fprintf_func) (info->stream, "x");
- if (l & (1 << 23))
- (*info->fprintf_func) (info->stream, "y");
- if (l & (1 << 22))
- (*info->fprintf_func) (info->stream, "z");
- (*info->fprintf_func) (info->stream, "\t");
- break;
-
- case '8':
- (*info->fprintf_func) (info->stream, "vf%d",
- (l >> OP_SH_FS) & OP_MASK_FS);
- switch ((l >> 21) & 0x3)
- {
- case 0:
- (*info->fprintf_func) (info->stream, "x");
- break;
- case 1:
- (*info->fprintf_func) (info->stream, "y");
- break;
- case 2:
- (*info->fprintf_func) (info->stream, "z");
- break;
- case 3:
- (*info->fprintf_func) (info->stream, "w");
- break;
- }
- break;
- case 'J':
- (*info->fprintf_func) (info->stream, "I");
- break;
-
- case 'Q':
- (*info->fprintf_func) (info->stream, "Q");
- break;
-
- case 'X':
- (*info->fprintf_func) (info->stream, "R");
- break;
-
- case 'U':
- (*info->fprintf_func) (info->stream, "ACC");
- break;
-
- case 'O':
- delta = (l >> 6) & 0x7fff;
- delta <<= 3;
- (*info->print_address_func) (delta, info);
- break;
-
- /* end-sanitize-r5900 */
case 'T':
case 'W':
(l >> OP_SH_PERFREG) & OP_MASK_PERFREG);
break;
- /* start-sanitize-vr5400 */
- case 'e':
- (*info->fprintf_func) (info->stream, "%d",
- (l >> OP_SH_VECBYTE) & OP_MASK_VECBYTE);
- break;
-
- case '%':
+ case 'H':
(*info->fprintf_func) (info->stream, "%d",
- (l >> OP_SH_VECALIGN) & OP_MASK_VECALIGN);
+ (l >> OP_SH_SEL) & OP_MASK_SEL);
break;
- /* end-sanitize-vr5400 */
default:
+ /* xgettext:c-format */
(*info->fprintf_func) (info->stream,
- "# internal error, undefined modifier(%c)", *d);
+ _("# internal error, undefined modifier(%c)"),
+ *d);
break;
}
}
\f
+#if SYMTAB_AVAILABLE
+
+/* Figure out the MIPS ISA and CPU based on the machine number.
+ FIXME: What does this have to do with SYMTAB_AVAILABLE? */
+
+static void
+set_mips_isa_type (mach, isa, cputype)
+ int mach;
+ int *isa;
+ int *cputype;
+{
+ int target_processor = CPU_UNKNOWN;
+ int mips_isa = ISA_UNKNOWN;
+
+ /* Use standard MIPS register names by default. */
+ reg_names = std_reg_names;
+
+ switch (mach)
+ {
+ case bfd_mach_mips3000:
+ target_processor = CPU_R3000;
+ mips_isa = ISA_MIPS1;
+ break;
+ case bfd_mach_mips3900:
+ target_processor = CPU_R3900;
+ mips_isa = ISA_MIPS1;
+ break;
+ case bfd_mach_mips4000:
+ target_processor = CPU_R4000;
+ mips_isa = ISA_MIPS3;
+ break;
+ case bfd_mach_mips4010:
+ target_processor = CPU_R4010;
+ mips_isa = ISA_MIPS2;
+ break;
+ case bfd_mach_mips4100:
+ target_processor = CPU_VR4100;
+ mips_isa = ISA_MIPS3;
+ break;
+ case bfd_mach_mips4111:
+ target_processor = CPU_VR4100; /* FIXME: Shouldn't this be CPU_R4111 ??? */
+ mips_isa = ISA_MIPS3;
+ break;
+ case bfd_mach_mips4300:
+ target_processor = CPU_R4300;
+ mips_isa = ISA_MIPS3;
+ break;
+ case bfd_mach_mips4400:
+ target_processor = CPU_R4400;
+ mips_isa = ISA_MIPS3;
+ break;
+ case bfd_mach_mips4600:
+ target_processor = CPU_R4600;
+ mips_isa = ISA_MIPS3;
+ break;
+ case bfd_mach_mips4650:
+ target_processor = CPU_R4650;
+ mips_isa = ISA_MIPS3;
+ break;
+ case bfd_mach_mips5000:
+ target_processor = CPU_R5000;
+ mips_isa = ISA_MIPS4;
+ break;
+ case bfd_mach_mips6000:
+ target_processor = CPU_R6000;
+ mips_isa = ISA_MIPS2;
+ break;
+ case bfd_mach_mips8000:
+ target_processor = CPU_R8000;
+ mips_isa = ISA_MIPS4;
+ break;
+ case bfd_mach_mips10000:
+ target_processor = CPU_R10000;
+ mips_isa = ISA_MIPS4;
+ break;
+ case bfd_mach_mips16:
+ target_processor = CPU_MIPS16;
+ mips_isa = ISA_MIPS3;
+ break;
+ case bfd_mach_mips32:
+ target_processor = CPU_MIPS32;
+ mips_isa = ISA_MIPS32;
+ break;
+ case bfd_mach_mips32_4k:
+ target_processor = CPU_MIPS32_4K;
+ mips_isa = ISA_MIPS32;
+ break;
+ case bfd_mach_mips5:
+ target_processor = CPU_MIPS5;
+ mips_isa = ISA_MIPS5;
+ break;
+ case bfd_mach_mips64:
+ target_processor = CPU_MIPS64;
+ mips_isa = ISA_MIPS64;
+ break;
+ case bfd_mach_mips_sb1:
+ target_processor = CPU_SB1;
+ mips_isa = ISA_MIPS64;
+ break;
+ default:
+ target_processor = CPU_R3000;
+ mips_isa = ISA_MIPS3;
+ break;
+ }
+
+ *isa = mips_isa;
+ *cputype = target_processor;
+}
+
+#endif /* SYMTAB_AVAILABLE */
+
/* Print the mips instruction at address MEMADDR in debugged memory,
on using INFO. Returns length of the instruction, in bytes, which is
always 4. BIGENDIAN must be 1 if this is big-endian code, 0 if
init = 1;
}
- switch (info->mach)
- {
- /* start-sanitize-tx19 */
- case bfd_mach_mips1900:
- target_processor = 1900;
- mips_isa = 1;
- break;
- /* end-sanitize-tx19 */
- case bfd_mach_mips3000:
- target_processor = 3000;
- mips_isa = 1;
- break;
- case bfd_mach_mips3900:
- target_processor = 3900;
- mips_isa = 1;
- break;
- case bfd_mach_mips4000:
- target_processor = 4000;
- mips_isa = 3;
- break;
- case bfd_mach_mips4010:
- target_processor = 4010;
- mips_isa = 2;
- break;
- case bfd_mach_mips4100:
- target_processor = 4100;
- mips_isa = 3;
- break;
- case bfd_mach_mips4300:
- target_processor = 4300;
- mips_isa = 3;
- break;
- /* start-sanitize-vr4320 */
- case bfd_mach_mips4320:
- target_processor = 4320;
- mips_isa = 3;
- break;
- /* end-sanitize-vr4320 */
- case bfd_mach_mips4400:
- target_processor = 4400;
- mips_isa = 3;
- break;
- case bfd_mach_mips4600:
- target_processor = 4600;
- mips_isa = 3;
- break;
- case bfd_mach_mips4650:
- target_processor = 4650;
- mips_isa = 3;
- break;
- /* start-sanitize-tx49 */
- case bfd_mach_mips4900:
- target_processor = 4900;
- mips_isa = 3;
- break;
- /* end-sanitize-tx49 */
- case bfd_mach_mips5000:
- target_processor = 5000;
- mips_isa = 4;
- break;
- /* start-sanitize-vr5400 */
- case bfd_mach_mips5400:
- target_processor = 5400;
- mips_isa = 3;
- break;
- /* end-sanitize-vr5400 */
- /* start-sanitize-r5900 */
- case bfd_mach_mips5900:
- target_processor = 5900;
- mips_isa = 3;
- break;
- /* end-sanitize-r5900 */
- case bfd_mach_mips6000:
- target_processor = 6000;
- mips_isa = 2;
- break;
- case bfd_mach_mips8000:
- target_processor = 8000;
- mips_isa = 4;
- break;
- case bfd_mach_mips10000:
- target_processor = 10000;
- mips_isa = 4;
- break;
- case bfd_mach_mips16:
- target_processor = 16;
- mips_isa = 3;
- break;
- default:
- target_processor = 3000;
- mips_isa = 3;
- break;
-
- }
+#if ! SYMTAB_AVAILABLE
+ /* This is running out on a target machine, not in a host tool.
+ FIXME: Where does mips_target_info come from? */
+ target_processor = mips_target_info.processor;
+ mips_isa = mips_target_info.isa;
+#else
+ set_mips_isa_type (info->mach, &mips_isa, &target_processor);
+#endif
info->bytes_per_chunk = 4;
info->display_endian = info->endian;
if (op->pinfo != INSN_MACRO && (word & op->mask) == op->match)
{
register const char *d;
- int insn_isa;
-
- if ((op->membership & INSN_ISA) == INSN_ISA1)
- insn_isa = 1;
- else if ((op->membership & INSN_ISA) == INSN_ISA2)
- insn_isa = 2;
- else if ((op->membership & INSN_ISA) == INSN_ISA3)
- insn_isa = 3;
- else if ((op->membership & INSN_ISA) == INSN_ISA4)
- insn_isa = 4;
- else
- insn_isa = 15;
-
- if (insn_isa > mips_isa
- && (target_processor == 4650
- && op->membership & INSN_4650) == 0
- && (target_processor == 4010
- && op->membership & INSN_4010) == 0
- && (target_processor == 4100
- && op->membership & INSN_4100) == 0
- /* start-sanitize-vr4320 */
- && (target_processor == 4320
- && op->membership & INSN_4320) == 0
- /* end-sanitize-vr4320 */
- /* start-sanitize-vr5400 */
- && (target_processor == 5400
- && op->membership & INSN_5400) == 0
- /* end-sanitize-vr5400 */
- /* start-sanitize-r5900 */
- && (target_processor == 5900
- && op->membership & INSN_5900) == 0
- /* end-sanitize-r5900 */
- /* start-sanitize-tx49 */
- && (target_processor == 4900
- && op->membership & INSN_4900) == 0
- /* end-sanitize-tx49 */
- && (target_processor == 3900
- && op->membership & INSN_3900) == 0)
+
+ if (! OPCODE_IS_MEMBER (op, mips_isa, target_processor, 0))
continue;
(*info->fprintf_func) (info->stream, "%s", op->name);
d = op->args;
if (d != NULL && *d != '\0')
{
- /* start-sanitize-r5900 */
- /* If this is an opcode completer, then do not emit
- a tab after the opcode. */
- if (*d != '&')
- /* end-sanitize-r5900 */
(*info->fprintf_func) (info->stream, "\t");
for (; *d != '\0'; d++)
- /* start-sanitize-r5900 */
- /* If this is an escape character, go ahead and print the
- next character in the arg string verbatim. */
- if (*d == '#')
- {
- d++;
- (*info->fprintf_func) (info->stream, "%c", *d);
- }
- else
- /* end-sanitize-r5900 */
print_insn_arg (d, word, memaddr, info);
}
return 4;
}
+
+/* In an environment where we do not know the symbol type of the
+ instruction we are forced to assume that the low order bit of the
+ instructions' address may mark it as a mips16 instruction. If we
+ are single stepping, or the pc is within the disassembled function,
+ this works. Otherwise, we need a clue. Sometimes. */
+
int
print_insn_big_mips (memaddr, info)
bfd_vma memaddr;
bfd_byte buffer[4];
int status;
+#if 1
+ /* FIXME: If odd address, this is CLEARLY a mips 16 instruction. */
+ /* Only a few tools will work this way. */
+ if (memaddr & 0x01)
+ return print_insn_mips16 (memaddr, info);
+#endif
+
+#if SYMTAB_AVAILABLE
if (info->mach == 16
|| (info->flavour == bfd_target_elf_flavour
&& info->symbols != NULL
&& ((*(elf_symbol_type **) info->symbols)->internal_elf_sym.st_other
== STO_MIPS16)))
return print_insn_mips16 (memaddr, info);
+#endif
status = (*info->read_memory_func) (memaddr, buffer, 4, info);
if (status == 0)
bfd_byte buffer[4];
int status;
- /* start-sanitize-sky */
-#ifdef ARCH_dvp
- {
- /* bfd_mach_dvp_p is a macro which may evaluate its arguments more than
- once. Since dvp_mach_type is a function, ensure it's only called
- once. */
- int mach = dvp_info_mach_type (info);
-
- if (bfd_mach_dvp_p (info->mach)
- || bfd_mach_dvp_p (mach))
- return print_insn_dvp (memaddr, info);
- }
+
+#if 1
+ if (memaddr & 0x01)
+ return print_insn_mips16 (memaddr, info);
#endif
- /* end-sanitize-sky */
+#if SYMTAB_AVAILABLE
if (info->mach == 16
|| (info->flavour == bfd_target_elf_flavour
&& info->symbols != NULL
&& ((*(elf_symbol_type **) info->symbols)->internal_elf_sym.st_other
== STO_MIPS16)))
return print_insn_mips16 (memaddr, info);
+#endif
status = (*info->read_memory_func) (memaddr, buffer, 4, info);
if (status == 0)
int length;
int insn;
boolean use_extend;
- int extend;
+ int extend = 0;
const struct mips_opcode *op, *opend;
info->bytes_per_chunk = 2;
if (signedp && immed >= (1 << (nbits - 1)))
immed -= 1 << nbits;
immed <<= shift;
- if ((type == '<' || type == '>' || type == '[' || type == '[')
+ if ((type == '<' || type == '>' || type == '[' || type == ']')
&& immed == 0)
immed = 8;
}
if (! use_extend)
extend = 0;
l = ((l & 0x1f) << 23) | ((l & 0x3e0) << 13) | (extend << 2);
- (*info->print_address_func) ((memaddr & 0xf0000000) | l, info);
+ (*info->print_address_func) (((memaddr + 4) & 0xf0000000) | l, info);
info->insn_type = dis_jsr;
- info->target = (memaddr & 0xf0000000) | l;
+ info->target = ((memaddr + 4) & 0xf0000000) | l;
info->branch_delay_insns = 1;
break;
projects / deliverable / binutils-gdb.git / blobdiff