/* Print mips instructions for GDB, the GNU debugger, or for objdump.
- Copyright 1989, 91, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+ Copyright (c) 1989, 91-97, 1998 Free Software Foundation, Inc.
Contributed by Nobuyuki Hikichi(hikichi@sra.co.jp).
This file is part of GDB, GAS, and the GNU binutils.
#include "sysdep.h"
#include "dis-asm.h"
#include "opcode/mips.h"
+#include "opintl.h"
-/* FIXME: These are needed to figure out if this is a mips16 symbol or
- not. It would be better to think of a cleaner way to do this. */
+/* FIXME: These are needed to figure out if the code is mips16 or
+ not. The low bit of the address is often a good indicator. No
+ symbol table is available when this code runs out in an embedded
+ system as when it is used for disassembler support in a monitor. */
+
+#if !defined(EMBEDDED_ENV)
+#define SYMTAB_AVAILABLE 1
#include "elf-bfd.h"
#include "elf/mips.h"
+#endif
static int print_insn_mips16 PARAMS ((bfd_vma, struct disassemble_info *));
static void print_mips16_insn_arg
case ',':
case '(':
case ')':
+ /* start-sanitize-vr5400 */
+ case '[':
+ case ']':
+ /* end-sanitize-vr5400 */
+ /* start-sanitize-r5900 */
+ case '+':
+ case '-':
+ /* end-sanitize-r5900 */
(*info->fprintf_func) (info->stream, "%c", *d);
break;
(l >> OP_SH_CODE) & OP_MASK_CODE);
break;
+
+ case 'q':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_CODE2) & OP_MASK_CODE2);
+ break;
+
case 'C':
(*info->fprintf_func) (info->stream, "0x%x",
(l >> OP_SH_COPZ) & OP_MASK_COPZ);
(l >> OP_SH_FS) & OP_MASK_FS);
break;
+ /* start-sanitize-r5900 */
+ case '0':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> 6) & 0x1f);
+ break;
+
+ case '9':
+ (*info->fprintf_func) (info->stream, "vi27");
+ break;
+
+ case '1':
+ (*info->fprintf_func) (info->stream, "vf%d",
+ (l >> OP_SH_FT) & OP_MASK_FT);
+ break;
+ case '2':
+ (*info->fprintf_func) (info->stream, "vf%d",
+ (l >> OP_SH_FS) & OP_MASK_FS);
+ break;
+ case '3':
+ (*info->fprintf_func) (info->stream, "vf%d",
+ (l >> OP_SH_FD) & OP_MASK_FD);
+ break;
+
+ case '4':
+ (*info->fprintf_func) (info->stream, "vi%d",
+ (l >> OP_SH_FT) & OP_MASK_FT);
+ break;
+ case '5':
+ (*info->fprintf_func) (info->stream, "vi%d",
+ (l >> OP_SH_FS) & OP_MASK_FS);
+ break;
+ case '6':
+ (*info->fprintf_func) (info->stream, "vi%d",
+ (l >> OP_SH_FD) & OP_MASK_FD);
+ break;
+
+ case '7':
+ (*info->fprintf_func) (info->stream, "vf%d",
+ (l >> OP_SH_FT) & OP_MASK_FT);
+ switch ((l >> 23) & 0x3)
+ {
+ case 0:
+ (*info->fprintf_func) (info->stream, "x");
+ break;
+ case 1:
+ (*info->fprintf_func) (info->stream, "y");
+ break;
+ case 2:
+ (*info->fprintf_func) (info->stream, "z");
+ break;
+ case 3:
+ (*info->fprintf_func) (info->stream, "w");
+ break;
+ }
+ break;
+ case 'K':
+ break;
+
+ case ';':
+ (*info->fprintf_func) (info->stream, ".xyz\t");
+ break;
+
+ case '&':
+ (*info->fprintf_func) (info->stream, ".");
+ if (l & (1 << 21))
+ (*info->fprintf_func) (info->stream, "w");
+ if (l & (1 << 24))
+ (*info->fprintf_func) (info->stream, "x");
+ if (l & (1 << 23))
+ (*info->fprintf_func) (info->stream, "y");
+ if (l & (1 << 22))
+ (*info->fprintf_func) (info->stream, "z");
+ (*info->fprintf_func) (info->stream, "\t");
+ break;
+
+ case '8':
+ (*info->fprintf_func) (info->stream, "vf%d",
+ (l >> OP_SH_FS) & OP_MASK_FS);
+ switch ((l >> 21) & 0x3)
+ {
+ case 0:
+ (*info->fprintf_func) (info->stream, "x");
+ break;
+ case 1:
+ (*info->fprintf_func) (info->stream, "y");
+ break;
+ case 2:
+ (*info->fprintf_func) (info->stream, "z");
+ break;
+ case 3:
+ (*info->fprintf_func) (info->stream, "w");
+ break;
+ }
+ break;
+ case 'J':
+ (*info->fprintf_func) (info->stream, "I");
+ break;
+
+ case 'Q':
+ (*info->fprintf_func) (info->stream, "Q");
+ break;
+
+ case 'X':
+ (*info->fprintf_func) (info->stream, "R");
+ break;
+
+ case 'U':
+ (*info->fprintf_func) (info->stream, "ACC");
+ break;
+
+ case 'O':
+ delta = (l >> 6) & 0x7fff;
+ delta <<= 3;
+ (*info->print_address_func) (delta, info);
+ break;
+
+ /* end-sanitize-r5900 */
+
case 'T':
case 'W':
(*info->fprintf_func) (info->stream, "$f%d",
(l >> OP_SH_CCC) & OP_MASK_CCC);
break;
+ case 'P':
+ (*info->fprintf_func) (info->stream, "%d",
+ (l >> OP_SH_PERFREG) & OP_MASK_PERFREG);
+ break;
+
+ /* start-sanitize-vr5400 */
+ case 'e':
+ (*info->fprintf_func) (info->stream, "%d",
+ (l >> OP_SH_VECBYTE) & OP_MASK_VECBYTE);
+ break;
+
+ case '%':
+ (*info->fprintf_func) (info->stream, "%d",
+ (l >> OP_SH_VECALIGN) & OP_MASK_VECALIGN);
+ break;
+ /* end-sanitize-vr5400 */
+
default:
+ /* xgettext:c-format */
(*info->fprintf_func) (info->stream,
- "# internal error, undefined modifier(%c)", *d);
+ _("# internal error, undefined modifier(%c)"),
+ *d);
break;
}
}
\f
+#if SYMTAB_AVAILABLE
+
+/* Figure out the MIPS ISA and CPU based on the machine number.
+ FIXME: What does this have to do with SYMTAB_AVAILABLE? */
+
+static void
+set_mips_isa_type (mach, isa, cputype)
+ int mach;
+ int *isa;
+ int *cputype;
+{
+ int target_processor = 0;
+ int mips_isa = 0;
+
+ switch (mach)
+ {
+ /* start-sanitize-tx19 */
+ case bfd_mach_mips1900:
+ target_processor = 1900;
+ mips_isa = 1;
+ break;
+ /* end-sanitize-tx19 */
+ case bfd_mach_mips3000:
+ target_processor = 3000;
+ mips_isa = 1;
+ break;
+ case bfd_mach_mips3900:
+ target_processor = 3900;
+ mips_isa = 1;
+ break;
+ case bfd_mach_mips4000:
+ target_processor = 4000;
+ mips_isa = 3;
+ break;
+ case bfd_mach_mips4010:
+ target_processor = 4010;
+ mips_isa = 2;
+ break;
+ case bfd_mach_mips4100:
+ target_processor = 4100;
+ mips_isa = 3;
+ break;
+ case bfd_mach_mips4300:
+ target_processor = 4300;
+ mips_isa = 3;
+ break;
+ /* start-sanitize-vr4320 */
+ case bfd_mach_mips4320:
+ target_processor = 4320;
+ mips_isa = 3;
+ break;
+ /* end-sanitize-vr4320 */
+ case bfd_mach_mips4400:
+ target_processor = 4400;
+ mips_isa = 3;
+ break;
+ case bfd_mach_mips4600:
+ target_processor = 4600;
+ mips_isa = 3;
+ break;
+ case bfd_mach_mips4650:
+ target_processor = 4650;
+ mips_isa = 3;
+ break;
+ /* start-sanitize-tx49 */
+ case bfd_mach_mips4900:
+ target_processor = 4900;
+ mips_isa = 3;
+ break;
+ /* end-sanitize-tx49 */
+ case bfd_mach_mips5000:
+ target_processor = 5000;
+ mips_isa = 4;
+ break;
+ /* start-sanitize-vr5400 */
+ case bfd_mach_mips5400:
+ target_processor = 5400;
+ mips_isa = 3;
+ break;
+ /* end-sanitize-vr5400 */
+ /* start-sanitize-r5900 */
+ case bfd_mach_mips5900:
+ target_processor = 5900;
+ mips_isa = 3;
+ break;
+ /* end-sanitize-r5900 */
+ case bfd_mach_mips6000:
+ target_processor = 6000;
+ mips_isa = 2;
+ break;
+ case bfd_mach_mips8000:
+ target_processor = 8000;
+ mips_isa = 4;
+ break;
+ case bfd_mach_mips10000:
+ target_processor = 10000;
+ mips_isa = 4;
+ break;
+ case bfd_mach_mips16:
+ target_processor = 16;
+ mips_isa = 3;
+ break;
+ default:
+ target_processor = 3000;
+ mips_isa = 3;
+ break;
+
+ }
+
+ *isa = mips_isa;
+ *cputype = target_processor;
+}
+
+#endif /* SYMTAB_AVAILABLE */
+
/* Print the mips instruction at address MEMADDR in debugged memory,
on using INFO. Returns length of the instruction, in bytes, which is
always 4. BIGENDIAN must be 1 if this is big-endian code, 0 if
struct disassemble_info *info;
{
register const struct mips_opcode *op;
+ int target_processor, mips_isa;
static boolean init = 0;
static const struct mips_opcode *mips_hash[OP_MASK_OP + 1];
init = 1;
}
+#if ! SYMTAB_AVAILABLE
+ /* This is running out on a target machine, not in a host tool.
+ FIXME: Where does mips_target_info come from? */
+ target_processor = mips_target_info.processor;
+ mips_isa = mips_target_info.isa;
+#else
+ set_mips_isa_type (info->mach, &target_processor, &mips_isa);
+#endif
+
+ info->bytes_per_chunk = 4;
+ info->display_endian = info->endian;
+
op = mips_hash[(word >> OP_SH_OP) & OP_MASK_OP];
if (op != NULL)
{
if (op->pinfo != INSN_MACRO && (word & op->mask) == op->match)
{
register const char *d;
+ int insn_isa;
+
+ if ((op->membership & INSN_ISA) == INSN_ISA1)
+ insn_isa = 1;
+ else if ((op->membership & INSN_ISA) == INSN_ISA2)
+ insn_isa = 2;
+ else if ((op->membership & INSN_ISA) == INSN_ISA3)
+ insn_isa = 3;
+ else if ((op->membership & INSN_ISA) == INSN_ISA4)
+ insn_isa = 4;
+ else
+ insn_isa = 15;
+
+ if (insn_isa > mips_isa
+ && (target_processor == 4650
+ && op->membership & INSN_4650) == 0
+ && (target_processor == 4010
+ && op->membership & INSN_4010) == 0
+ && (target_processor == 4100
+ && op->membership & INSN_4100) == 0
+ /* start-sanitize-vr4320 */
+ && (target_processor == 4320
+ && op->membership & INSN_4320) == 0
+ /* end-sanitize-vr4320 */
+ /* start-sanitize-vr5400 */
+ && (target_processor == 5400
+ && op->membership & INSN_5400) == 0
+ /* end-sanitize-vr5400 */
+ /* start-sanitize-r5900 */
+ && (target_processor == 5900
+ && op->membership & INSN_5900) == 0
+ /* end-sanitize-r5900 */
+ /* start-sanitize-tx49 */
+ && (target_processor == 4900
+ && op->membership & INSN_4900) == 0
+ /* end-sanitize-tx49 */
+ && (target_processor == 3900
+ && op->membership & INSN_3900) == 0)
+ continue;
(*info->fprintf_func) (info->stream, "%s", op->name);
d = op->args;
if (d != NULL && *d != '\0')
{
- (*info->fprintf_func) (info->stream, "\t");
+ /* start-sanitize-r5900 */
+ /* If this is an opcode completer, then do not emit
+ a tab after the opcode. */
+ if (*d != '&' && *d != ';')
+ /* end-sanitize-r5900 */
+ (*info->fprintf_func) (info->stream, "\t");
for (; *d != '\0'; d++)
- print_insn_arg (d, word, memaddr, info);
+ /* start-sanitize-r5900 */
+ /* If this is an escape character, go ahead and print the
+ next character in the arg string verbatim. */
+ if (*d == '#')
+ {
+ d++;
+ (*info->fprintf_func) (info->stream, "%c", *d);
+ }
+ else
+ /* end-sanitize-r5900 */
+ print_insn_arg (d, word, memaddr, info);
}
return 4;
return 4;
}
+
+/* In an environment where we do not know the symbol type of the
+ instruction we are forced to assume that the low order bit of the
+ instructions' address may mark it as a mips16 instruction. If we
+ are single stepping, or the pc is within the disassembled function,
+ this works. Otherwise, we need a clue. Sometimes. */
+
int
print_insn_big_mips (memaddr, info)
bfd_vma memaddr;
bfd_byte buffer[4];
int status;
+#if 1
+ /* FIXME: If odd address, this is CLEARLY a mips 16 instruction. */
+ /* Only a few tools will work this way. */
+ if (memaddr & 0x01)
+ return print_insn_mips16 (memaddr, info);
+#endif
+
+#if SYMTAB_AVAILABLE
if (info->mach == 16
|| (info->flavour == bfd_target_elf_flavour
- && info->symbol != NULL
- && (((elf_symbol_type *) info->symbol)->internal_elf_sym.st_other
+ && info->symbols != NULL
+ && ((*(elf_symbol_type **) info->symbols)->internal_elf_sym.st_other
== STO_MIPS16)))
return print_insn_mips16 (memaddr, info);
+#endif
status = (*info->read_memory_func) (memaddr, buffer, 4, info);
if (status == 0)
bfd_byte buffer[4];
int status;
+ /* start-sanitize-sky */
+#ifdef ARCH_dvp
+ {
+ /* bfd_mach_dvp_p is a macro which may evaluate its arguments more than
+ once. Since dvp_mach_type is a function, ensure it's only called
+ once. */
+ int mach = dvp_info_mach_type (info);
+
+ if (bfd_mach_dvp_p (info->mach)
+ || bfd_mach_dvp_p (mach))
+ return print_insn_dvp (memaddr, info);
+ }
+#endif
+ /* end-sanitize-sky */
+
+#if 1
+ if (memaddr & 0x01)
+ return print_insn_mips16 (memaddr, info);
+#endif
+
+#if SYMTAB_AVAILABLE
if (info->mach == 16
|| (info->flavour == bfd_target_elf_flavour
- && info->symbol != NULL
- && (((elf_symbol_type *) info->symbol)->internal_elf_sym.st_other
+ && info->symbols != NULL
+ && ((*(elf_symbol_type **) info->symbols)->internal_elf_sym.st_other
== STO_MIPS16)))
return print_insn_mips16 (memaddr, info);
+#endif
status = (*info->read_memory_func) (memaddr, buffer, 4, info);
if (status == 0)
int length;
int insn;
boolean use_extend;
- int extend;
+ int extend = 0;
const struct mips_opcode *op, *opend;
+ info->bytes_per_chunk = 2;
+ info->display_endian = info->endian;
+
info->insn_info_valid = 1;
info->branch_delay_insns = 0;
info->data_size = 0;
if (signedp && immed >= (1 << (nbits - 1)))
immed -= 1 << nbits;
immed <<= shift;
- if ((type == '<' || type == '>' || type == '[' || type == '[')
+ if ((type == '<' || type == '>' || type == '[' || type == ']')
&& immed == 0)
immed = 8;
}
baseaddr = memaddr + 2;
}
else if (use_extend)
- baseaddr = memaddr;
+ baseaddr = memaddr - 2;
else
{
int status;
l = (l >> MIPS16OP_SH_IMM6) & MIPS16OP_MASK_IMM6;
amask = (l >> 3) & 7;
- if (amask == 5 || amask == 6)
- {
- (*info->fprintf_func) (info->stream, "??");
- need_comma = 1;
- }
- else if (amask > 0 && amask < 7)
+
+ if (amask > 0 && amask < 5)
{
- (*info->fprintf_func) (info->stream, "%s", reg_names[4]);
+ (*info->fprintf_func) (info->stream, "$%s", reg_names[4]);
if (amask > 1)
- (*info->fprintf_func) (info->stream, "-%s",
+ (*info->fprintf_func) (info->stream, "-$%s",
reg_names[amask + 3]);
need_comma = 1;
}
}
else if (smask > 0)
{
- (*info->fprintf_func) (info->stream, "%s%s",
+ (*info->fprintf_func) (info->stream, "%s$%s",
need_comma ? "," : "",
reg_names[16]);
if (smask > 1)
- (*info->fprintf_func) (info->stream, "-%s",
+ (*info->fprintf_func) (info->stream, "-$%s",
reg_names[smask + 15]);
need_comma = 1;
}
if (l & 1)
- (*info->fprintf_func) (info->stream, "%s%s",
- need_comma ? "," : "",
- reg_names[31]);
+ {
+ (*info->fprintf_func) (info->stream, "%s$%s",
+ need_comma ? "," : "",
+ reg_names[31]);
+ need_comma = 1;
+ }
+
+ if (amask == 5 || amask == 6)
+ {
+ (*info->fprintf_func) (info->stream, "%s$f0",
+ need_comma ? "," : "");
+ if (amask == 6)
+ (*info->fprintf_func) (info->stream, "-$f1");
+ }
}
break;