/* Print mips instructions for GDB, the GNU debugger, or for objdump.
- Copyright 1989, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003
+ Free Software Foundation, Inc.
Contributed by Nobuyuki Hikichi(hikichi@sra.co.jp).
-This file is part of GDB.
+This file is part of GDB, GAS, and the GNU binutils.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-#include <ansidecl.h>
#include "sysdep.h"
#include "dis-asm.h"
+#include "libiberty.h"
#include "opcode/mips.h"
+#include "opintl.h"
-/* FIXME: we need direct access to the swapping functions. */
-#include "libbfd.h"
+/* FIXME: These are needed to figure out if the code is mips16 or
+ not. The low bit of the address is often a good indicator. No
+ symbol table is available when this code runs out in an embedded
+ system as when it is used for disassembler support in a monitor. */
-/* Mips instructions are never longer than this many bytes. */
-#define MAXLEN 4
+#if !defined(EMBEDDED_ENV)
+#define SYMTAB_AVAILABLE 1
+#include "elf-bfd.h"
+#include "elf/mips.h"
+#endif
+
+/* Mips instructions are at maximum this many bytes long. */
+#define INSNLEN 4
+
+static void set_default_mips_dis_options
+ PARAMS ((struct disassemble_info *));
+static void parse_mips_dis_option
+ PARAMS ((const char *, unsigned int));
+static void parse_mips_dis_options
+ PARAMS ((const char *));
+static int _print_insn_mips
+ PARAMS ((bfd_vma, struct disassemble_info *, enum bfd_endian));
+static int print_insn_mips
+ PARAMS ((bfd_vma, unsigned long int, struct disassemble_info *));
+static void print_insn_args
+ PARAMS ((const char *, unsigned long, bfd_vma, struct disassemble_info *));
+static int print_insn_mips16
+ PARAMS ((bfd_vma, struct disassemble_info *));
+static int is_newabi
+ PARAMS ((Elf_Internal_Ehdr *));
+static void print_mips16_insn_arg
+ PARAMS ((int, const struct mips_opcode *, int, bfd_boolean, int, bfd_vma,
+ struct disassemble_info *));
\f
-/* FIXME: This should be shared with gdb somehow. */
-#define REGISTER_NAMES \
- { "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", \
- "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \
- "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \
- "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra", \
- "sr", "lo", "hi", "bad", "cause","pc", \
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",\
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",\
- "fsr", "fir", "fp", "inx", "rand", "tlblo","ctxt", "tlbhi",\
- "epc", "prid"\
- }
-
-static CONST char * CONST reg_names[] = REGISTER_NAMES;
+/* FIXME: These should be shared with gdb somehow. */
+
+struct mips_cp0sel_name {
+ unsigned int cp0reg;
+ unsigned int sel;
+ const char * const name;
+};
+
+/* The mips16 register names. */
+static const char * const mips16_reg_names[] = {
+ "s0", "s1", "v0", "v1", "a0", "a1", "a2", "a3"
+};
+
+static const char * const mips_gpr_names_numeric[32] = {
+ "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7",
+ "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15",
+ "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23",
+ "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31"
+};
+
+static const char * const mips_gpr_names_oldabi[32] = {
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
+};
+
+static const char * const mips_gpr_names_newabi[32] = {
+ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+ "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
+ "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+ "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
+};
+
+static const char * const mips_fpr_names_numeric[32] = {
+ "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7",
+ "$f8", "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15",
+ "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23",
+ "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31"
+};
+
+static const char * const mips_fpr_names_32[32] = {
+ "fv0", "fv0f", "fv1", "fv1f", "ft0", "ft0f", "ft1", "ft1f",
+ "ft2", "ft2f", "ft3", "ft3f", "fa0", "fa0f", "fa1", "fa1f",
+ "ft4", "ft4f", "ft5", "ft5f", "fs0", "fs0f", "fs1", "fs1f",
+ "fs2", "fs2f", "fs3", "fs3f", "fs4", "fs4f", "fs5", "fs5f"
+};
+
+static const char * const mips_fpr_names_n32[32] = {
+ "fv0", "ft14", "fv1", "ft15", "ft0", "ft1", "ft2", "ft3",
+ "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3",
+ "fa4", "fa5", "fa6", "fa7", "fs0", "ft8", "fs1", "ft9",
+ "fs2", "ft10", "fs3", "ft11", "fs4", "ft12", "fs5", "ft13"
+};
+
+static const char * const mips_fpr_names_64[32] = {
+ "fv0", "ft12", "fv1", "ft13", "ft0", "ft1", "ft2", "ft3",
+ "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3",
+ "fa4", "fa5", "fa6", "fa7", "ft8", "ft9", "ft10", "ft11",
+ "fs0", "fs1", "fs2", "fs3", "fs4", "fs5", "fs6", "fs7"
+};
+
+static const char * const mips_cp0_names_numeric[32] = {
+ "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7",
+ "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15",
+ "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23",
+ "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31"
+};
+
+static const char * const mips_cp0_names_mips3264[32] = {
+ "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1",
+ "c0_context", "c0_pagemask", "c0_wired", "$7",
+ "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare",
+ "c0_status", "c0_cause", "c0_epc", "c0_prid",
+ "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi",
+ "c0_xcontext", "$21", "$22", "c0_debug",
+ "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr",
+ "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave",
+};
+
+static const struct mips_cp0sel_name mips_cp0sel_names_mips3264[] = {
+ { 16, 1, "c0_config1" },
+ { 16, 2, "c0_config2" },
+ { 16, 3, "c0_config3" },
+ { 18, 1, "c0_watchlo,1" },
+ { 18, 2, "c0_watchlo,2" },
+ { 18, 3, "c0_watchlo,3" },
+ { 18, 4, "c0_watchlo,4" },
+ { 18, 5, "c0_watchlo,5" },
+ { 18, 6, "c0_watchlo,6" },
+ { 18, 7, "c0_watchlo,7" },
+ { 19, 1, "c0_watchhi,1" },
+ { 19, 2, "c0_watchhi,2" },
+ { 19, 3, "c0_watchhi,3" },
+ { 19, 4, "c0_watchhi,4" },
+ { 19, 5, "c0_watchhi,5" },
+ { 19, 6, "c0_watchhi,6" },
+ { 19, 7, "c0_watchhi,7" },
+ { 25, 1, "c0_perfcnt,1" },
+ { 25, 2, "c0_perfcnt,2" },
+ { 25, 3, "c0_perfcnt,3" },
+ { 25, 4, "c0_perfcnt,4" },
+ { 25, 5, "c0_perfcnt,5" },
+ { 25, 6, "c0_perfcnt,6" },
+ { 25, 7, "c0_perfcnt,7" },
+ { 27, 1, "c0_cacheerr,1" },
+ { 27, 2, "c0_cacheerr,2" },
+ { 27, 3, "c0_cacheerr,3" },
+ { 28, 1, "c0_datalo" },
+ { 29, 1, "c0_datahi" }
+};
+
+static const char * const mips_cp0_names_mips3264r2[32] = {
+ "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1",
+ "c0_context", "c0_pagemask", "c0_wired", "c0_hwrena",
+ "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare",
+ "c0_status", "c0_cause", "c0_epc", "c0_prid",
+ "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi",
+ "c0_xcontext", "$21", "$22", "c0_debug",
+ "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr",
+ "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave",
+};
+
+static const struct mips_cp0sel_name mips_cp0sel_names_mips3264r2[] = {
+ { 4, 1, "c0_contextconfig" },
+ { 5, 1, "c0_pagegrain" },
+ { 12, 1, "c0_intctl" },
+ { 12, 2, "c0_srsctl" },
+ { 12, 3, "c0_srsmap" },
+ { 15, 1, "c0_ebase" },
+ { 16, 1, "c0_config1" },
+ { 16, 2, "c0_config2" },
+ { 16, 3, "c0_config3" },
+ { 18, 1, "c0_watchlo,1" },
+ { 18, 2, "c0_watchlo,2" },
+ { 18, 3, "c0_watchlo,3" },
+ { 18, 4, "c0_watchlo,4" },
+ { 18, 5, "c0_watchlo,5" },
+ { 18, 6, "c0_watchlo,6" },
+ { 18, 7, "c0_watchlo,7" },
+ { 19, 1, "c0_watchhi,1" },
+ { 19, 2, "c0_watchhi,2" },
+ { 19, 3, "c0_watchhi,3" },
+ { 19, 4, "c0_watchhi,4" },
+ { 19, 5, "c0_watchhi,5" },
+ { 19, 6, "c0_watchhi,6" },
+ { 19, 7, "c0_watchhi,7" },
+ { 23, 1, "c0_tracecontrol" },
+ { 23, 2, "c0_tracecontrol2" },
+ { 23, 3, "c0_usertracedata" },
+ { 23, 4, "c0_tracebpc" },
+ { 25, 1, "c0_perfcnt,1" },
+ { 25, 2, "c0_perfcnt,2" },
+ { 25, 3, "c0_perfcnt,3" },
+ { 25, 4, "c0_perfcnt,4" },
+ { 25, 5, "c0_perfcnt,5" },
+ { 25, 6, "c0_perfcnt,6" },
+ { 25, 7, "c0_perfcnt,7" },
+ { 27, 1, "c0_cacheerr,1" },
+ { 27, 2, "c0_cacheerr,2" },
+ { 27, 3, "c0_cacheerr,3" },
+ { 28, 1, "c0_datalo" },
+ { 28, 2, "c0_taglo1" },
+ { 28, 3, "c0_datalo1" },
+ { 28, 4, "c0_taglo2" },
+ { 28, 5, "c0_datalo2" },
+ { 28, 6, "c0_taglo3" },
+ { 28, 7, "c0_datalo3" },
+ { 29, 1, "c0_datahi" },
+ { 29, 2, "c0_taghi1" },
+ { 29, 3, "c0_datahi1" },
+ { 29, 4, "c0_taghi2" },
+ { 29, 5, "c0_datahi2" },
+ { 29, 6, "c0_taghi3" },
+ { 29, 7, "c0_datahi3" },
+};
+
+/* SB-1: MIPS64 (mips_cp0_names_mips3264) with minor mods. */
+static const char * const mips_cp0_names_sb1[32] = {
+ "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1",
+ "c0_context", "c0_pagemask", "c0_wired", "$7",
+ "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare",
+ "c0_status", "c0_cause", "c0_epc", "c0_prid",
+ "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi",
+ "c0_xcontext", "$21", "$22", "c0_debug",
+ "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr_i",
+ "c0_taglo_i", "c0_taghi_i", "c0_errorepc", "c0_desave",
+};
+
+static const struct mips_cp0sel_name mips_cp0sel_names_sb1[] = {
+ { 16, 1, "c0_config1" },
+ { 18, 1, "c0_watchlo,1" },
+ { 19, 1, "c0_watchhi,1" },
+ { 22, 0, "c0_perftrace" },
+ { 23, 3, "c0_edebug" },
+ { 25, 1, "c0_perfcnt,1" },
+ { 25, 2, "c0_perfcnt,2" },
+ { 25, 3, "c0_perfcnt,3" },
+ { 25, 4, "c0_perfcnt,4" },
+ { 25, 5, "c0_perfcnt,5" },
+ { 25, 6, "c0_perfcnt,6" },
+ { 25, 7, "c0_perfcnt,7" },
+ { 26, 1, "c0_buserr_pa" },
+ { 27, 1, "c0_cacheerr_d" },
+ { 27, 3, "c0_cacheerr_d_pa" },
+ { 28, 1, "c0_datalo_i" },
+ { 28, 2, "c0_taglo_d" },
+ { 28, 3, "c0_datalo_d" },
+ { 29, 1, "c0_datahi_i" },
+ { 29, 2, "c0_taghi_d" },
+ { 29, 3, "c0_datahi_d" },
+};
+
+static const char * const mips_hwr_names_numeric[32] = {
+ "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7",
+ "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15",
+ "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23",
+ "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31"
+};
+
+static const char * const mips_hwr_names_mips3264r2[32] = {
+ "hwr_cpunum", "hwr_synci_step", "hwr_cc", "hwr_ccres",
+ "$4", "$5", "$6", "$7",
+ "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15",
+ "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23",
+ "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31"
+};
+
+struct mips_abi_choice {
+ const char *name;
+ const char * const *gpr_names;
+ const char * const *fpr_names;
+};
+
+struct mips_abi_choice mips_abi_choices[] = {
+ { "numeric", mips_gpr_names_numeric, mips_fpr_names_numeric },
+ { "32", mips_gpr_names_oldabi, mips_fpr_names_32 },
+ { "n32", mips_gpr_names_newabi, mips_fpr_names_n32 },
+ { "64", mips_gpr_names_newabi, mips_fpr_names_64 },
+};
+
+struct mips_arch_choice {
+ const char *name;
+ int bfd_mach_valid;
+ unsigned long bfd_mach;
+ int processor;
+ int isa;
+ const char * const *cp0_names;
+ const struct mips_cp0sel_name *cp0sel_names;
+ unsigned int cp0sel_names_len;
+ const char * const *hwr_names;
+};
+
+const struct mips_arch_choice mips_arch_choices[] = {
+ { "numeric", 0, 0, 0, 0,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+
+ { "r3000", 1, bfd_mach_mips3000, CPU_R3000, ISA_MIPS1,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r3900", 1, bfd_mach_mips3900, CPU_R3900, ISA_MIPS1,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r4000", 1, bfd_mach_mips4000, CPU_R4000, ISA_MIPS3,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r4010", 1, bfd_mach_mips4010, CPU_R4010, ISA_MIPS2,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "vr4100", 1, bfd_mach_mips4100, CPU_VR4100, ISA_MIPS3,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "vr4111", 1, bfd_mach_mips4111, CPU_R4111, ISA_MIPS3,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "vr4120", 1, bfd_mach_mips4120, CPU_VR4120, ISA_MIPS3,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r4300", 1, bfd_mach_mips4300, CPU_R4300, ISA_MIPS3,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r4400", 1, bfd_mach_mips4400, CPU_R4400, ISA_MIPS3,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r4600", 1, bfd_mach_mips4600, CPU_R4600, ISA_MIPS3,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r4650", 1, bfd_mach_mips4650, CPU_R4650, ISA_MIPS3,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r5000", 1, bfd_mach_mips5000, CPU_R5000, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "vr5400", 1, bfd_mach_mips5400, CPU_VR5400, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "vr5500", 1, bfd_mach_mips5500, CPU_VR5500, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r6000", 1, bfd_mach_mips6000, CPU_R6000, ISA_MIPS2,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "rm7000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "rm9000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r8000", 1, bfd_mach_mips8000, CPU_R8000, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r10000", 1, bfd_mach_mips10000, CPU_R10000, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "r12000", 1, bfd_mach_mips12000, CPU_R12000, ISA_MIPS4,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+ { "mips5", 1, bfd_mach_mips5, CPU_MIPS5, ISA_MIPS5,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+
+ /* For stock MIPS32, disassemble all applicable MIPS-specified ASEs.
+ Note that MIPS-3D and MDMX are not applicable to MIPS32. (See
+ _MIPS32 Architecture For Programmers Volume I: Introduction to the
+ MIPS32 Architecture_ (MIPS Document Number MD00082, Revision 0.95),
+ page 1. */
+ { "mips32", 1, bfd_mach_mipsisa32, CPU_MIPS32,
+ ISA_MIPS32 | INSN_MIPS16,
+ mips_cp0_names_mips3264,
+ mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264),
+ mips_hwr_names_numeric },
+
+ { "mips32r2", 1, bfd_mach_mipsisa32r2, CPU_MIPS32R2,
+ ISA_MIPS32R2 | INSN_MIPS16,
+ mips_cp0_names_mips3264r2,
+ mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2),
+ mips_hwr_names_mips3264r2 },
+
+ /* For stock MIPS64, disassemble all applicable MIPS-specified ASEs. */
+ { "mips64", 1, bfd_mach_mipsisa64, CPU_MIPS64,
+ ISA_MIPS64 | INSN_MIPS16 | INSN_MIPS3D | INSN_MDMX,
+ mips_cp0_names_mips3264,
+ mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264),
+ mips_hwr_names_numeric },
+
+ { "sb1", 1, bfd_mach_mips_sb1, CPU_SB1,
+ ISA_MIPS64 | INSN_MIPS3D | INSN_SB1,
+ mips_cp0_names_sb1,
+ mips_cp0sel_names_sb1, ARRAY_SIZE (mips_cp0sel_names_sb1),
+ mips_hwr_names_numeric },
+
+ /* This entry, mips16, is here only for ISA/processor selection; do
+ not print its name. */
+ { "", 1, bfd_mach_mips16, CPU_MIPS16, ISA_MIPS3 | INSN_MIPS16,
+ mips_cp0_names_numeric, NULL, 0, mips_hwr_names_numeric },
+};
+
+/* ISA and processor type to disassemble for, and register names to use.
+ set_default_mips_dis_options and parse_mips_dis_options fill in these
+ values. */
+static int mips_processor;
+static int mips_isa;
+static const char * const *mips_gpr_names;
+static const char * const *mips_fpr_names;
+static const char * const *mips_cp0_names;
+static const struct mips_cp0sel_name *mips_cp0sel_names;
+static int mips_cp0sel_names_len;
+static const char * const *mips_hwr_names;
+
+static const struct mips_abi_choice *choose_abi_by_name
+ PARAMS ((const char *, unsigned int));
+static const struct mips_arch_choice *choose_arch_by_name
+ PARAMS ((const char *, unsigned int));
+static const struct mips_arch_choice *choose_arch_by_number
+ PARAMS ((unsigned long));
+static const struct mips_cp0sel_name *lookup_mips_cp0sel_name
+ PARAMS ((const struct mips_cp0sel_name *, unsigned int, unsigned int,
+ unsigned int));
+\f
+static const struct mips_abi_choice *
+choose_abi_by_name (name, namelen)
+ const char *name;
+ unsigned int namelen;
+{
+ const struct mips_abi_choice *c;
+ unsigned int i;
+
+ for (i = 0, c = NULL; i < ARRAY_SIZE (mips_abi_choices) && c == NULL; i++)
+ {
+ if (strncmp (mips_abi_choices[i].name, name, namelen) == 0
+ && strlen (mips_abi_choices[i].name) == namelen)
+ c = &mips_abi_choices[i];
+ }
+ return c;
+}
+
+static const struct mips_arch_choice *
+choose_arch_by_name (name, namelen)
+ const char *name;
+ unsigned int namelen;
+{
+ const struct mips_arch_choice *c = NULL;
+ unsigned int i;
+
+ for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++)
+ {
+ if (strncmp (mips_arch_choices[i].name, name, namelen) == 0
+ && strlen (mips_arch_choices[i].name) == namelen)
+ c = &mips_arch_choices[i];
+ }
+ return c;
+}
+
+static const struct mips_arch_choice *
+choose_arch_by_number (mach)
+ unsigned long mach;
+{
+ static unsigned long hint_bfd_mach;
+ static const struct mips_arch_choice *hint_arch_choice;
+ const struct mips_arch_choice *c;
+ unsigned int i;
+
+ /* We optimize this because even if the user specifies no
+ flags, this will be done for every instruction! */
+ if (hint_bfd_mach == mach
+ && hint_arch_choice != NULL
+ && hint_arch_choice->bfd_mach == hint_bfd_mach)
+ return hint_arch_choice;
+
+ for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++)
+ {
+ if (mips_arch_choices[i].bfd_mach_valid
+ && mips_arch_choices[i].bfd_mach == mach)
+ {
+ c = &mips_arch_choices[i];
+ hint_bfd_mach = mach;
+ hint_arch_choice = c;
+ }
+ }
+ return c;
+}
+
+void
+set_default_mips_dis_options (info)
+ struct disassemble_info *info;
+{
+ const struct mips_arch_choice *chosen_arch;
+
+ /* Defaults: mipsIII/r3000 (?!), (o)32-style ("oldabi") GPR names,
+ and numeric FPR, CP0 register, and HWR names. */
+ mips_isa = ISA_MIPS3;
+ mips_processor = CPU_R3000;
+ mips_gpr_names = mips_gpr_names_oldabi;
+ mips_fpr_names = mips_fpr_names_numeric;
+ mips_cp0_names = mips_cp0_names_numeric;
+ mips_cp0sel_names = NULL;
+ mips_cp0sel_names_len = 0;
+ mips_hwr_names = mips_hwr_names_numeric;
+
+ /* If an ELF "newabi" binary, use the n32/(n)64 GPR names. */
+ if (info->flavour == bfd_target_elf_flavour && info->section != NULL)
+ {
+ Elf_Internal_Ehdr *header;
+
+ header = elf_elfheader (info->section->owner);
+ if (is_newabi (header))
+ mips_gpr_names = mips_gpr_names_newabi;
+ }
+
+ /* Set ISA, architecture, and cp0 register names as best we can. */
+#if ! SYMTAB_AVAILABLE
+ /* This is running out on a target machine, not in a host tool.
+ FIXME: Where does mips_target_info come from? */
+ target_processor = mips_target_info.processor;
+ mips_isa = mips_target_info.isa;
+#else
+ chosen_arch = choose_arch_by_number (info->mach);
+ if (chosen_arch != NULL)
+ {
+ mips_processor = chosen_arch->processor;
+ mips_isa = chosen_arch->isa;
+ mips_cp0_names = chosen_arch->cp0_names;
+ mips_cp0sel_names = chosen_arch->cp0sel_names;
+ mips_cp0sel_names_len = chosen_arch->cp0sel_names_len;
+ mips_hwr_names = chosen_arch->hwr_names;
+ }
+#endif
+}
+
+void
+parse_mips_dis_option (option, len)
+ const char *option;
+ unsigned int len;
+{
+ unsigned int i, optionlen, vallen;
+ const char *val;
+ const struct mips_abi_choice *chosen_abi;
+ const struct mips_arch_choice *chosen_arch;
+
+ /* Look for the = that delimits the end of the option name. */
+ for (i = 0; i < len; i++)
+ {
+ if (option[i] == '=')
+ break;
+ }
+ if (i == 0) /* Invalid option: no name before '='. */
+ return;
+ if (i == len) /* Invalid option: no '='. */
+ return;
+ if (i == (len - 1)) /* Invalid option: no value after '='. */
+ return;
+
+ optionlen = i;
+ val = option + (optionlen + 1);
+ vallen = len - (optionlen + 1);
+
+ if (strncmp("gpr-names", option, optionlen) == 0
+ && strlen("gpr-names") == optionlen)
+ {
+ chosen_abi = choose_abi_by_name (val, vallen);
+ if (chosen_abi != NULL)
+ mips_gpr_names = chosen_abi->gpr_names;
+ return;
+ }
+
+ if (strncmp("fpr-names", option, optionlen) == 0
+ && strlen("fpr-names") == optionlen)
+ {
+ chosen_abi = choose_abi_by_name (val, vallen);
+ if (chosen_abi != NULL)
+ mips_fpr_names = chosen_abi->fpr_names;
+ return;
+ }
+
+ if (strncmp("cp0-names", option, optionlen) == 0
+ && strlen("cp0-names") == optionlen)
+ {
+ chosen_arch = choose_arch_by_name (val, vallen);
+ if (chosen_arch != NULL)
+ {
+ mips_cp0_names = chosen_arch->cp0_names;
+ mips_cp0sel_names = chosen_arch->cp0sel_names;
+ mips_cp0sel_names_len = chosen_arch->cp0sel_names_len;
+ }
+ return;
+ }
+
+ if (strncmp("hwr-names", option, optionlen) == 0
+ && strlen("hwr-names") == optionlen)
+ {
+ chosen_arch = choose_arch_by_name (val, vallen);
+ if (chosen_arch != NULL)
+ mips_hwr_names = chosen_arch->hwr_names;
+ return;
+ }
+
+ if (strncmp("reg-names", option, optionlen) == 0
+ && strlen("reg-names") == optionlen)
+ {
+ /* We check both ABI and ARCH here unconditionally, so
+ that "numeric" will do the desirable thing: select
+ numeric register names for all registers. Other than
+ that, a given name probably won't match both. */
+ chosen_abi = choose_abi_by_name (val, vallen);
+ if (chosen_abi != NULL)
+ {
+ mips_gpr_names = chosen_abi->gpr_names;
+ mips_fpr_names = chosen_abi->fpr_names;
+ }
+ chosen_arch = choose_arch_by_name (val, vallen);
+ if (chosen_arch != NULL)
+ {
+ mips_cp0_names = chosen_arch->cp0_names;
+ mips_cp0sel_names = chosen_arch->cp0sel_names;
+ mips_cp0sel_names_len = chosen_arch->cp0sel_names_len;
+ mips_hwr_names = chosen_arch->hwr_names;
+ }
+ return;
+ }
+
+ /* Invalid option. */
+}
+
+void
+parse_mips_dis_options (options)
+ const char *options;
+{
+ const char *option_end;
+
+ if (options == NULL)
+ return;
+
+ while (*options != '\0')
+ {
+ /* Skip empty options. */
+ if (*options == ',')
+ {
+ options++;
+ continue;
+ }
+
+ /* We know that *options is neither NUL or a comma. */
+ option_end = options + 1;
+ while (*option_end != ',' && *option_end != '\0')
+ option_end++;
+
+ parse_mips_dis_option (options, option_end - options);
+
+ /* Go on to the next one. If option_end points to a comma, it
+ will be skipped above. */
+ options = option_end;
+ }
+}
+
+static const struct mips_cp0sel_name *
+lookup_mips_cp0sel_name(names, len, cp0reg, sel)
+ const struct mips_cp0sel_name *names;
+ unsigned int len, cp0reg, sel;
+{
+ unsigned int i;
+
+ for (i = 0; i < len; i++)
+ if (names[i].cp0reg == cp0reg && names[i].sel == sel)
+ return &names[i];
+ return NULL;
+}
\f
-/* subroutine */
+/* Print insn arguments for 32/64-bit code. */
+
static void
-print_insn_arg (d, l, pc, info)
- char *d;
+print_insn_args (d, l, pc, info)
+ const char *d;
register unsigned long int l;
bfd_vma pc;
struct disassemble_info *info;
{
- int delta;
+ int op, delta;
+ unsigned int lsb, msb, msbd;
+
+ lsb = 0;
- switch (*d)
+ for (; *d != '\0'; d++)
{
- case ',':
- case '(':
- case ')':
- (*info->fprintf_func) (info->stream, "%c", *d);
- break;
+ switch (*d)
+ {
+ case ',':
+ case '(':
+ case ')':
+ case '[':
+ case ']':
+ (*info->fprintf_func) (info->stream, "%c", *d);
+ break;
- case 's':
- case 'b':
- case 'r':
- case 'v':
- (*info->fprintf_func) (info->stream, "$%s",
- reg_names[(l >> OP_SH_RS) & OP_MASK_RS]);
- break;
+ case '+':
+ /* Extension character; switch for second char. */
+ d++;
+ switch (*d)
+ {
+ case '\0':
+ /* xgettext:c-format */
+ (*info->fprintf_func) (info->stream,
+ _("# internal error, incomplete extension sequence (+)"));
+ return;
- case 't':
- case 'w':
- (*info->fprintf_func) (info->stream, "$%s",
- reg_names[(l >> OP_SH_RT) & OP_MASK_RT]);
- break;
+ case 'A':
+ lsb = (l >> OP_SH_SHAMT) & OP_MASK_SHAMT;
+ (*info->fprintf_func) (info->stream, "0x%x", lsb);
+ break;
+
+ case 'B':
+ msb = (l >> OP_SH_INSMSB) & OP_MASK_INSMSB;
+ (*info->fprintf_func) (info->stream, "0x%x", msb - lsb + 1);
+ break;
- case 'i':
- case 'u':
- (*info->fprintf_func) (info->stream, "%d",
- (l >> OP_SH_IMMEDIATE) & OP_MASK_IMMEDIATE);
- break;
+ case 'C':
+ msbd = (l >> OP_SH_EXTMSBD) & OP_MASK_EXTMSBD;
+ (*info->fprintf_func) (info->stream, "0x%x", msbd + 1);
+ break;
- case 'j': /* same as i, but sign-extended */
- case 'o':
- delta = (l >> OP_SH_DELTA) & OP_MASK_DELTA;
- if (delta & 0x8000)
- delta |= ~0xffff;
- (*info->fprintf_func) (info->stream, "%d",
- delta);
- break;
+ case 'D':
+ {
+ const struct mips_cp0sel_name *n;
+ unsigned int cp0reg, sel;
- case 'a':
- (*info->print_address_func)
- (((pc & 0xF0000000) | (((l >> OP_SH_TARGET) & OP_MASK_TARGET) << 2)),
- info);
- break;
+ cp0reg = (l >> OP_SH_RD) & OP_MASK_RD;
+ sel = (l >> OP_SH_SEL) & OP_MASK_SEL;
- case 'p':
- /* sign extend the displacement */
- delta = (l >> OP_SH_DELTA) & OP_MASK_DELTA;
- if (delta & 0x8000)
- delta |= ~0xffff;
- (*info->print_address_func)
- ((delta << 2) + pc + 4,
- info);
- break;
+ /* CP0 register including 'sel' code for mtcN (et al.), to be
+ printed textually if known. If not known, print both
+ CP0 register name and sel numerically since CP0 register
+ with sel 0 may have a name unrelated to register being
+ printed. */
+ n = lookup_mips_cp0sel_name(mips_cp0sel_names,
+ mips_cp0sel_names_len, cp0reg, sel);
+ if (n != NULL)
+ (*info->fprintf_func) (info->stream, "%s", n->name);
+ else
+ (*info->fprintf_func) (info->stream, "$%d,%d", cp0reg, sel);
+ break;
+ }
- case 'd':
- (*info->fprintf_func) (info->stream, "$%s",
- reg_names[(l >> OP_SH_RD) & OP_MASK_RD]);
- break;
+ default:
+ /* xgettext:c-format */
+ (*info->fprintf_func) (info->stream,
+ _("# internal error, undefined extension sequence (+%c)"),
+ *d);
+ return;
+ }
+ break;
- case '<':
- (*info->fprintf_func) (info->stream, "0x%x",
- (l >> OP_SH_SHAMT) & OP_MASK_SHAMT);
- break;
+ case 's':
+ case 'b':
+ case 'r':
+ case 'v':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_gpr_names[(l >> OP_SH_RS) & OP_MASK_RS]);
+ break;
- case 'c':
- (*info->fprintf_func) (info->stream, "0x%x",
- (l >> OP_SH_CODE) & OP_MASK_CODE);
- break;
+ case 't':
+ case 'w':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_gpr_names[(l >> OP_SH_RT) & OP_MASK_RT]);
+ break;
- case 'C':
- (*info->fprintf_func) (info->stream, "0x%x",
- (l >> OP_SH_COPZ) & OP_MASK_COPZ);
- break;
+ case 'i':
+ case 'u':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_IMMEDIATE) & OP_MASK_IMMEDIATE);
+ break;
- case 'B':
- (*info->fprintf_func) (info->stream, "0x%x",
- (l >> OP_SH_SYSCALL) & OP_MASK_SYSCALL);
- break;
+ case 'j': /* Same as i, but sign-extended. */
+ case 'o':
+ delta = (l >> OP_SH_DELTA) & OP_MASK_DELTA;
+ if (delta & 0x8000)
+ delta |= ~0xffff;
+ (*info->fprintf_func) (info->stream, "%d",
+ delta);
+ break;
- case 'S':
- case 'V':
- (*info->fprintf_func) (info->stream, "$f%d",
- (l >> OP_SH_FS) & OP_MASK_FS);
- break;
+ case 'h':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (unsigned int) ((l >> OP_SH_PREFX)
+ & OP_MASK_PREFX));
+ break;
- case 'T':
- case 'W':
- (*info->fprintf_func) (info->stream, "$f%d",
- (l >> OP_SH_FT) & OP_MASK_FT);
- break;
+ case 'k':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (unsigned int) ((l >> OP_SH_CACHE)
+ & OP_MASK_CACHE));
+ break;
- case 'D':
- (*info->fprintf_func) (info->stream, "$f%d",
- (l >> OP_SH_FD) & OP_MASK_FD);
- break;
+ case 'a':
+ info->target = (((pc + 4) & ~(bfd_vma) 0x0fffffff)
+ | (((l >> OP_SH_TARGET) & OP_MASK_TARGET) << 2));
+ (*info->print_address_func) (info->target, info);
+ break;
- case 'E':
- (*info->fprintf_func) (info->stream, "$%d",
- (l >> OP_SH_RT) & OP_MASK_RT);
- break;
+ case 'p':
+ /* Sign extend the displacement. */
+ delta = (l >> OP_SH_DELTA) & OP_MASK_DELTA;
+ if (delta & 0x8000)
+ delta |= ~0xffff;
+ info->target = (delta << 2) + pc + INSNLEN;
+ (*info->print_address_func) (info->target, info);
+ break;
- case 'G':
- (*info->fprintf_func) (info->stream, "$%d",
- (l >> OP_SH_RD) & OP_MASK_RD);
- break;
+ case 'd':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_gpr_names[(l >> OP_SH_RD) & OP_MASK_RD]);
+ break;
- default:
- (*info->fprintf_func) (info->stream,
- "# internal error, undefined modifier(%c)", *d);
- break;
+ case 'U':
+ {
+ /* First check for both rd and rt being equal. */
+ unsigned int reg = (l >> OP_SH_RD) & OP_MASK_RD;
+ if (reg == ((l >> OP_SH_RT) & OP_MASK_RT))
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_gpr_names[reg]);
+ else
+ {
+ /* If one is zero use the other. */
+ if (reg == 0)
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_gpr_names[(l >> OP_SH_RT) & OP_MASK_RT]);
+ else if (((l >> OP_SH_RT) & OP_MASK_RT) == 0)
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_gpr_names[reg]);
+ else /* Bogus, result depends on processor. */
+ (*info->fprintf_func) (info->stream, "%s or %s",
+ mips_gpr_names[reg],
+ mips_gpr_names[(l >> OP_SH_RT) & OP_MASK_RT]);
+ }
+ }
+ break;
+
+ case 'z':
+ (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[0]);
+ break;
+
+ case '<':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_SHAMT) & OP_MASK_SHAMT);
+ break;
+
+ case 'c':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_CODE) & OP_MASK_CODE);
+ break;
+
+ case 'q':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_CODE2) & OP_MASK_CODE2);
+ break;
+
+ case 'C':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_COPZ) & OP_MASK_COPZ);
+ break;
+
+ case 'B':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_CODE20) & OP_MASK_CODE20);
+ break;
+
+ case 'J':
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_CODE19) & OP_MASK_CODE19);
+ break;
+
+ case 'S':
+ case 'V':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_fpr_names[(l >> OP_SH_FS) & OP_MASK_FS]);
+ break;
+
+ case 'T':
+ case 'W':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_fpr_names[(l >> OP_SH_FT) & OP_MASK_FT]);
+ break;
+
+ case 'D':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_fpr_names[(l >> OP_SH_FD) & OP_MASK_FD]);
+ break;
+
+ case 'R':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_fpr_names[(l >> OP_SH_FR) & OP_MASK_FR]);
+ break;
+
+ case 'E':
+ /* Coprocessor register for lwcN instructions, et al.
+
+ Note that there is no load/store cp0 instructions, and
+ that FPU (cp1) instructions disassemble this field using
+ 'T' format. Therefore, until we gain understanding of
+ cp2 register names, we can simply print the register
+ numbers. */
+ (*info->fprintf_func) (info->stream, "$%d",
+ (l >> OP_SH_RT) & OP_MASK_RT);
+ break;
+
+ case 'G':
+ /* Coprocessor register for mtcN instructions, et al. Note
+ that FPU (cp1) instructions disassemble this field using
+ 'S' format. Therefore, we only need to worry about cp0,
+ cp2, and cp3. */
+ op = (l >> OP_SH_OP) & OP_MASK_OP;
+ if (op == OP_OP_COP0)
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_cp0_names[(l >> OP_SH_RD) & OP_MASK_RD]);
+ else
+ (*info->fprintf_func) (info->stream, "$%d",
+ (l >> OP_SH_RD) & OP_MASK_RD);
+ break;
+
+ case 'K':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_hwr_names[(l >> OP_SH_RD) & OP_MASK_RD]);
+ break;
+
+ case 'N':
+ (*info->fprintf_func) (info->stream, "$fcc%d",
+ (l >> OP_SH_BCC) & OP_MASK_BCC);
+ break;
+
+ case 'M':
+ (*info->fprintf_func) (info->stream, "$fcc%d",
+ (l >> OP_SH_CCC) & OP_MASK_CCC);
+ break;
+
+ case 'P':
+ (*info->fprintf_func) (info->stream, "%d",
+ (l >> OP_SH_PERFREG) & OP_MASK_PERFREG);
+ break;
+
+ case 'e':
+ (*info->fprintf_func) (info->stream, "%d",
+ (l >> OP_SH_VECBYTE) & OP_MASK_VECBYTE);
+ break;
+
+ case '%':
+ (*info->fprintf_func) (info->stream, "%d",
+ (l >> OP_SH_VECALIGN) & OP_MASK_VECALIGN);
+ break;
+
+ case 'H':
+ (*info->fprintf_func) (info->stream, "%d",
+ (l >> OP_SH_SEL) & OP_MASK_SEL);
+ break;
+
+ case 'O':
+ (*info->fprintf_func) (info->stream, "%d",
+ (l >> OP_SH_ALN) & OP_MASK_ALN);
+ break;
+
+ case 'Q':
+ {
+ unsigned int vsel = (l >> OP_SH_VSEL) & OP_MASK_VSEL;
+ if ((vsel & 0x10) == 0)
+ {
+ int fmt;
+ vsel &= 0x0f;
+ for (fmt = 0; fmt < 3; fmt++, vsel >>= 1)
+ if ((vsel & 1) == 0)
+ break;
+ (*info->fprintf_func) (info->stream, "$v%d[%d]",
+ (l >> OP_SH_FT) & OP_MASK_FT,
+ vsel >> 1);
+ }
+ else if ((vsel & 0x08) == 0)
+ {
+ (*info->fprintf_func) (info->stream, "$v%d",
+ (l >> OP_SH_FT) & OP_MASK_FT);
+ }
+ else
+ {
+ (*info->fprintf_func) (info->stream, "0x%x",
+ (l >> OP_SH_FT) & OP_MASK_FT);
+ }
+ }
+ break;
+
+ case 'X':
+ (*info->fprintf_func) (info->stream, "$v%d",
+ (l >> OP_SH_FD) & OP_MASK_FD);
+ break;
+
+ case 'Y':
+ (*info->fprintf_func) (info->stream, "$v%d",
+ (l >> OP_SH_FS) & OP_MASK_FS);
+ break;
+
+ case 'Z':
+ (*info->fprintf_func) (info->stream, "$v%d",
+ (l >> OP_SH_FT) & OP_MASK_FT);
+ break;
+
+ default:
+ /* xgettext:c-format */
+ (*info->fprintf_func) (info->stream,
+ _("# internal error, undefined modifier(%c)"),
+ *d);
+ return;
+ }
}
}
\f
+/* Check if the object uses NewABI conventions. */
+
+static int
+is_newabi (header)
+ Elf_Internal_Ehdr *header;
+{
+ /* There are no old-style ABIs which use 64-bit ELF. */
+ if (header->e_ident[EI_CLASS] == ELFCLASS64)
+ return 1;
+
+ /* If a 32-bit ELF file, n32 is a new-style ABI. */
+ if ((header->e_flags & EF_MIPS_ABI2) != 0)
+ return 1;
+
+ return 0;
+}
+\f
/* Print the mips instruction at address MEMADDR in debugged memory,
on using INFO. Returns length of the instruction, in bytes, which is
- always 4. BIGENDIAN must be 1 if this is big-endian code, 0 if
+ always INSNLEN. BIGENDIAN must be 1 if this is big-endian code, 0 if
this is little-endian code. */
-int
-_print_insn_mips (memaddr, word, info)
+static int
+print_insn_mips (memaddr, word, info)
bfd_vma memaddr;
- struct disassemble_info *info;
unsigned long int word;
+ struct disassemble_info *info;
{
- register int i;
- register char *d;
+ register const struct mips_opcode *op;
+ static bfd_boolean init = 0;
+ static const struct mips_opcode *mips_hash[OP_MASK_OP + 1];
- for (i = 0; i < NUMOPCODES; i++)
+ /* Build a hash table to shorten the search time. */
+ if (! init)
{
- if (mips_opcodes[i].pinfo != INSN_MACRO)
+ unsigned int i;
+
+ for (i = 0; i <= OP_MASK_OP; i++)
{
- register unsigned int match = mips_opcodes[i].match;
- register unsigned int mask = mips_opcodes[i].mask;
- if ((word & mask) == match)
- break;
+ for (op = mips_opcodes; op < &mips_opcodes[NUMOPCODES]; op++)
+ {
+ if (op->pinfo == INSN_MACRO)
+ continue;
+ if (i == ((op->match >> OP_SH_OP) & OP_MASK_OP))
+ {
+ mips_hash[i] = op;
+ break;
+ }
+ }
}
+
+ init = 1;
}
- /* Handle undefined instructions. */
- if (i == NUMOPCODES)
+ info->bytes_per_chunk = INSNLEN;
+ info->display_endian = info->endian;
+ info->insn_info_valid = 1;
+ info->branch_delay_insns = 0;
+ info->data_size = 0;
+ info->insn_type = dis_nonbranch;
+ info->target = 0;
+ info->target2 = 0;
+
+ op = mips_hash[(word >> OP_SH_OP) & OP_MASK_OP];
+ if (op != NULL)
{
- (*info->fprintf_func) (info->stream, "0x%x", word);
- return 4;
- }
+ for (; op < &mips_opcodes[NUMOPCODES]; op++)
+ {
+ if (op->pinfo != INSN_MACRO && (word & op->mask) == op->match)
+ {
+ register const char *d;
+
+ /* We always allow to disassemble the jalx instruction. */
+ if (! OPCODE_IS_MEMBER (op, mips_isa, mips_processor)
+ && strcmp (op->name, "jalx"))
+ continue;
- (*info->fprintf_func) (info->stream, "%s", mips_opcodes[i].name);
+ /* Figure out instruction type and branch delay information. */
+ if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0)
+ {
+ if ((info->insn_type & INSN_WRITE_GPR_31) != 0)
+ info->insn_type = dis_jsr;
+ else
+ info->insn_type = dis_branch;
+ info->branch_delay_insns = 1;
+ }
+ else if ((op->pinfo & (INSN_COND_BRANCH_DELAY
+ | INSN_COND_BRANCH_LIKELY)) != 0)
+ {
+ if ((info->insn_type & INSN_WRITE_GPR_31) != 0)
+ info->insn_type = dis_condjsr;
+ else
+ info->insn_type = dis_condbranch;
+ info->branch_delay_insns = 1;
+ }
+ else if ((op->pinfo & (INSN_STORE_MEMORY
+ | INSN_LOAD_MEMORY_DELAY)) != 0)
+ info->insn_type = dis_dref;
- if (!(d = mips_opcodes[i].args))
- return 4;
+ (*info->fprintf_func) (info->stream, "%s", op->name);
- (*info->fprintf_func) (info->stream, " ");
+ d = op->args;
+ if (d != NULL && *d != '\0')
+ {
+ (*info->fprintf_func) (info->stream, "\t");
+ print_insn_args (d, word, memaddr, info);
+ }
- while (*d)
- print_insn_arg (d++, word, memaddr, info);
+ return INSNLEN;
+ }
+ }
+ }
- return 4;
+ /* Handle undefined instructions. */
+ info->insn_type = dis_noninsn;
+ (*info->fprintf_func) (info->stream, "0x%x", word);
+ return INSNLEN;
}
+\f
+/* In an environment where we do not know the symbol type of the
+ instruction we are forced to assume that the low order bit of the
+ instructions' address may mark it as a mips16 instruction. If we
+ are single stepping, or the pc is within the disassembled function,
+ this works. Otherwise, we need a clue. Sometimes. */
-int
-print_insn_big_mips (memaddr, info)
+static int
+_print_insn_mips (memaddr, info, endianness)
bfd_vma memaddr;
struct disassemble_info *info;
+ enum bfd_endian endianness;
{
- bfd_byte buffer[4];
- int status = (*info->read_memory_func) (memaddr, buffer, 4, info);
+ bfd_byte buffer[INSNLEN];
+ int status;
+
+ set_default_mips_dis_options (info);
+ parse_mips_dis_options (info->disassembler_options);
+
+#if 1
+ /* FIXME: If odd address, this is CLEARLY a mips 16 instruction. */
+ /* Only a few tools will work this way. */
+ if (memaddr & 0x01)
+ return print_insn_mips16 (memaddr, info);
+#endif
+
+#if SYMTAB_AVAILABLE
+ if (info->mach == bfd_mach_mips16
+ || (info->flavour == bfd_target_elf_flavour
+ && info->symbols != NULL
+ && ((*(elf_symbol_type **) info->symbols)->internal_elf_sym.st_other
+ == STO_MIPS16)))
+ return print_insn_mips16 (memaddr, info);
+#endif
+
+ status = (*info->read_memory_func) (memaddr, buffer, INSNLEN, info);
if (status == 0)
- return _print_insn_mips (memaddr, _do_getb32 (buffer), info);
+ {
+ unsigned long insn;
+
+ if (endianness == BFD_ENDIAN_BIG)
+ insn = (unsigned long) bfd_getb32 (buffer);
+ else
+ insn = (unsigned long) bfd_getl32 (buffer);
+
+ return print_insn_mips (memaddr, insn, info);
+ }
else
{
(*info->memory_error_func) (status, memaddr, info);
}
}
+int
+print_insn_big_mips (memaddr, info)
+ bfd_vma memaddr;
+ struct disassemble_info *info;
+{
+ return _print_insn_mips (memaddr, info, BFD_ENDIAN_BIG);
+}
+
int
print_insn_little_mips (memaddr, info)
bfd_vma memaddr;
struct disassemble_info *info;
{
- bfd_byte buffer[4];
- int status = (*info->read_memory_func) (memaddr, buffer, 4, info);
- if (status == 0)
- return _print_insn_mips (memaddr, _do_getl32 (buffer), info);
- else
+ return _print_insn_mips (memaddr, info, BFD_ENDIAN_LITTLE);
+}
+\f
+/* Disassemble mips16 instructions. */
+
+static int
+print_insn_mips16 (memaddr, info)
+ bfd_vma memaddr;
+ struct disassemble_info *info;
+{
+ int status;
+ bfd_byte buffer[2];
+ int length;
+ int insn;
+ bfd_boolean use_extend;
+ int extend = 0;
+ const struct mips_opcode *op, *opend;
+
+ info->bytes_per_chunk = 2;
+ info->display_endian = info->endian;
+ info->insn_info_valid = 1;
+ info->branch_delay_insns = 0;
+ info->data_size = 0;
+ info->insn_type = dis_nonbranch;
+ info->target = 0;
+ info->target2 = 0;
+
+ status = (*info->read_memory_func) (memaddr, buffer, 2, info);
+ if (status != 0)
{
(*info->memory_error_func) (status, memaddr, info);
return -1;
}
+
+ length = 2;
+
+ if (info->endian == BFD_ENDIAN_BIG)
+ insn = bfd_getb16 (buffer);
+ else
+ insn = bfd_getl16 (buffer);
+
+ /* Handle the extend opcode specially. */
+ use_extend = FALSE;
+ if ((insn & 0xf800) == 0xf000)
+ {
+ use_extend = TRUE;
+ extend = insn & 0x7ff;
+
+ memaddr += 2;
+
+ status = (*info->read_memory_func) (memaddr, buffer, 2, info);
+ if (status != 0)
+ {
+ (*info->fprintf_func) (info->stream, "extend 0x%x",
+ (unsigned int) extend);
+ (*info->memory_error_func) (status, memaddr, info);
+ return -1;
+ }
+
+ if (info->endian == BFD_ENDIAN_BIG)
+ insn = bfd_getb16 (buffer);
+ else
+ insn = bfd_getl16 (buffer);
+
+ /* Check for an extend opcode followed by an extend opcode. */
+ if ((insn & 0xf800) == 0xf000)
+ {
+ (*info->fprintf_func) (info->stream, "extend 0x%x",
+ (unsigned int) extend);
+ info->insn_type = dis_noninsn;
+ return length;
+ }
+
+ length += 2;
+ }
+
+ /* FIXME: Should probably use a hash table on the major opcode here. */
+
+ opend = mips16_opcodes + bfd_mips16_num_opcodes;
+ for (op = mips16_opcodes; op < opend; op++)
+ {
+ if (op->pinfo != INSN_MACRO && (insn & op->mask) == op->match)
+ {
+ const char *s;
+
+ if (strchr (op->args, 'a') != NULL)
+ {
+ if (use_extend)
+ {
+ (*info->fprintf_func) (info->stream, "extend 0x%x",
+ (unsigned int) extend);
+ info->insn_type = dis_noninsn;
+ return length - 2;
+ }
+
+ use_extend = FALSE;
+
+ memaddr += 2;
+
+ status = (*info->read_memory_func) (memaddr, buffer, 2,
+ info);
+ if (status == 0)
+ {
+ use_extend = TRUE;
+ if (info->endian == BFD_ENDIAN_BIG)
+ extend = bfd_getb16 (buffer);
+ else
+ extend = bfd_getl16 (buffer);
+ length += 2;
+ }
+ }
+
+ (*info->fprintf_func) (info->stream, "%s", op->name);
+ if (op->args[0] != '\0')
+ (*info->fprintf_func) (info->stream, "\t");
+
+ for (s = op->args; *s != '\0'; s++)
+ {
+ if (*s == ','
+ && s[1] == 'w'
+ && (((insn >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX)
+ == ((insn >> MIPS16OP_SH_RY) & MIPS16OP_MASK_RY)))
+ {
+ /* Skip the register and the comma. */
+ ++s;
+ continue;
+ }
+ if (*s == ','
+ && s[1] == 'v'
+ && (((insn >> MIPS16OP_SH_RZ) & MIPS16OP_MASK_RZ)
+ == ((insn >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX)))
+ {
+ /* Skip the register and the comma. */
+ ++s;
+ continue;
+ }
+ print_mips16_insn_arg (*s, op, insn, use_extend, extend, memaddr,
+ info);
+ }
+
+ if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0)
+ {
+ info->branch_delay_insns = 1;
+ if (info->insn_type != dis_jsr)
+ info->insn_type = dis_branch;
+ }
+
+ return length;
+ }
+ }
+
+ if (use_extend)
+ (*info->fprintf_func) (info->stream, "0x%x", extend | 0xf000);
+ (*info->fprintf_func) (info->stream, "0x%x", insn);
+ info->insn_type = dis_noninsn;
+
+ return length;
+}
+
+/* Disassemble an operand for a mips16 instruction. */
+
+static void
+print_mips16_insn_arg (type, op, l, use_extend, extend, memaddr, info)
+ char type;
+ const struct mips_opcode *op;
+ int l;
+ bfd_boolean use_extend;
+ int extend;
+ bfd_vma memaddr;
+ struct disassemble_info *info;
+{
+ switch (type)
+ {
+ case ',':
+ case '(':
+ case ')':
+ (*info->fprintf_func) (info->stream, "%c", type);
+ break;
+
+ case 'y':
+ case 'w':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips16_reg_names[((l >> MIPS16OP_SH_RY)
+ & MIPS16OP_MASK_RY)]);
+ break;
+
+ case 'x':
+ case 'v':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips16_reg_names[((l >> MIPS16OP_SH_RX)
+ & MIPS16OP_MASK_RX)]);
+ break;
+
+ case 'z':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips16_reg_names[((l >> MIPS16OP_SH_RZ)
+ & MIPS16OP_MASK_RZ)]);
+ break;
+
+ case 'Z':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips16_reg_names[((l >> MIPS16OP_SH_MOVE32Z)
+ & MIPS16OP_MASK_MOVE32Z)]);
+ break;
+
+ case '0':
+ (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[0]);
+ break;
+
+ case 'S':
+ (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[29]);
+ break;
+
+ case 'P':
+ (*info->fprintf_func) (info->stream, "$pc");
+ break;
+
+ case 'R':
+ (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[31]);
+ break;
+
+ case 'X':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_gpr_names[((l >> MIPS16OP_SH_REGR32)
+ & MIPS16OP_MASK_REGR32)]);
+ break;
+
+ case 'Y':
+ (*info->fprintf_func) (info->stream, "%s",
+ mips_gpr_names[MIPS16OP_EXTRACT_REG32R (l)]);
+ break;
+
+ case '<':
+ case '>':
+ case '[':
+ case ']':
+ case '4':
+ case '5':
+ case 'H':
+ case 'W':
+ case 'D':
+ case 'j':
+ case '6':
+ case '8':
+ case 'V':
+ case 'C':
+ case 'U':
+ case 'k':
+ case 'K':
+ case 'p':
+ case 'q':
+ case 'A':
+ case 'B':
+ case 'E':
+ {
+ int immed, nbits, shift, signedp, extbits, pcrel, extu, branch;
+
+ shift = 0;
+ signedp = 0;
+ extbits = 16;
+ pcrel = 0;
+ extu = 0;
+ branch = 0;
+ switch (type)
+ {
+ case '<':
+ nbits = 3;
+ immed = (l >> MIPS16OP_SH_RZ) & MIPS16OP_MASK_RZ;
+ extbits = 5;
+ extu = 1;
+ break;
+ case '>':
+ nbits = 3;
+ immed = (l >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX;
+ extbits = 5;
+ extu = 1;
+ break;
+ case '[':
+ nbits = 3;
+ immed = (l >> MIPS16OP_SH_RZ) & MIPS16OP_MASK_RZ;
+ extbits = 6;
+ extu = 1;
+ break;
+ case ']':
+ nbits = 3;
+ immed = (l >> MIPS16OP_SH_RX) & MIPS16OP_MASK_RX;
+ extbits = 6;
+ extu = 1;
+ break;
+ case '4':
+ nbits = 4;
+ immed = (l >> MIPS16OP_SH_IMM4) & MIPS16OP_MASK_IMM4;
+ signedp = 1;
+ extbits = 15;
+ break;
+ case '5':
+ nbits = 5;
+ immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5;
+ info->insn_type = dis_dref;
+ info->data_size = 1;
+ break;
+ case 'H':
+ nbits = 5;
+ shift = 1;
+ immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5;
+ info->insn_type = dis_dref;
+ info->data_size = 2;
+ break;
+ case 'W':
+ nbits = 5;
+ shift = 2;
+ immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5;
+ if ((op->pinfo & MIPS16_INSN_READ_PC) == 0
+ && (op->pinfo & MIPS16_INSN_READ_SP) == 0)
+ {
+ info->insn_type = dis_dref;
+ info->data_size = 4;
+ }
+ break;
+ case 'D':
+ nbits = 5;
+ shift = 3;
+ immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5;
+ info->insn_type = dis_dref;
+ info->data_size = 8;
+ break;
+ case 'j':
+ nbits = 5;
+ immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5;
+ signedp = 1;
+ break;
+ case '6':
+ nbits = 6;
+ immed = (l >> MIPS16OP_SH_IMM6) & MIPS16OP_MASK_IMM6;
+ break;
+ case '8':
+ nbits = 8;
+ immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8;
+ break;
+ case 'V':
+ nbits = 8;
+ shift = 2;
+ immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8;
+ /* FIXME: This might be lw, or it might be addiu to $sp or
+ $pc. We assume it's load. */
+ info->insn_type = dis_dref;
+ info->data_size = 4;
+ break;
+ case 'C':
+ nbits = 8;
+ shift = 3;
+ immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8;
+ info->insn_type = dis_dref;
+ info->data_size = 8;
+ break;
+ case 'U':
+ nbits = 8;
+ immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8;
+ extu = 1;
+ break;
+ case 'k':
+ nbits = 8;
+ immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8;
+ signedp = 1;
+ break;
+ case 'K':
+ nbits = 8;
+ shift = 3;
+ immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8;
+ signedp = 1;
+ break;
+ case 'p':
+ nbits = 8;
+ immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8;
+ signedp = 1;
+ pcrel = 1;
+ branch = 1;
+ info->insn_type = dis_condbranch;
+ break;
+ case 'q':
+ nbits = 11;
+ immed = (l >> MIPS16OP_SH_IMM11) & MIPS16OP_MASK_IMM11;
+ signedp = 1;
+ pcrel = 1;
+ branch = 1;
+ info->insn_type = dis_branch;
+ break;
+ case 'A':
+ nbits = 8;
+ shift = 2;
+ immed = (l >> MIPS16OP_SH_IMM8) & MIPS16OP_MASK_IMM8;
+ pcrel = 1;
+ /* FIXME: This can be lw or la. We assume it is lw. */
+ info->insn_type = dis_dref;
+ info->data_size = 4;
+ break;
+ case 'B':
+ nbits = 5;
+ shift = 3;
+ immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5;
+ pcrel = 1;
+ info->insn_type = dis_dref;
+ info->data_size = 8;
+ break;
+ case 'E':
+ nbits = 5;
+ shift = 2;
+ immed = (l >> MIPS16OP_SH_IMM5) & MIPS16OP_MASK_IMM5;
+ pcrel = 1;
+ break;
+ default:
+ abort ();
+ }
+
+ if (! use_extend)
+ {
+ if (signedp && immed >= (1 << (nbits - 1)))
+ immed -= 1 << nbits;
+ immed <<= shift;
+ if ((type == '<' || type == '>' || type == '[' || type == ']')
+ && immed == 0)
+ immed = 8;
+ }
+ else
+ {
+ if (extbits == 16)
+ immed |= ((extend & 0x1f) << 11) | (extend & 0x7e0);
+ else if (extbits == 15)
+ immed |= ((extend & 0xf) << 11) | (extend & 0x7f0);
+ else
+ immed = ((extend >> 6) & 0x1f) | (extend & 0x20);
+ immed &= (1 << extbits) - 1;
+ if (! extu && immed >= (1 << (extbits - 1)))
+ immed -= 1 << extbits;
+ }
+
+ if (! pcrel)
+ (*info->fprintf_func) (info->stream, "%d", immed);
+ else
+ {
+ bfd_vma baseaddr;
+
+ if (branch)
+ {
+ immed *= 2;
+ baseaddr = memaddr + 2;
+ }
+ else if (use_extend)
+ baseaddr = memaddr - 2;
+ else
+ {
+ int status;
+ bfd_byte buffer[2];
+
+ baseaddr = memaddr;
+
+ /* If this instruction is in the delay slot of a jr
+ instruction, the base address is the address of the
+ jr instruction. If it is in the delay slot of jalr
+ instruction, the base address is the address of the
+ jalr instruction. This test is unreliable: we have
+ no way of knowing whether the previous word is
+ instruction or data. */
+ status = (*info->read_memory_func) (memaddr - 4, buffer, 2,
+ info);
+ if (status == 0
+ && (((info->endian == BFD_ENDIAN_BIG
+ ? bfd_getb16 (buffer)
+ : bfd_getl16 (buffer))
+ & 0xf800) == 0x1800))
+ baseaddr = memaddr - 4;
+ else
+ {
+ status = (*info->read_memory_func) (memaddr - 2, buffer,
+ 2, info);
+ if (status == 0
+ && (((info->endian == BFD_ENDIAN_BIG
+ ? bfd_getb16 (buffer)
+ : bfd_getl16 (buffer))
+ & 0xf81f) == 0xe800))
+ baseaddr = memaddr - 2;
+ }
+ }
+ info->target = (baseaddr & ~((1 << shift) - 1)) + immed;
+ (*info->print_address_func) (info->target, info);
+ }
+ }
+ break;
+
+ case 'a':
+ if (! use_extend)
+ extend = 0;
+ l = ((l & 0x1f) << 23) | ((l & 0x3e0) << 13) | (extend << 2);
+ info->target = ((memaddr + 4) & ~(bfd_vma) 0x0fffffff) | l;
+ (*info->print_address_func) (info->target, info);
+ info->insn_type = dis_jsr;
+ info->branch_delay_insns = 1;
+ break;
+
+ case 'l':
+ case 'L':
+ {
+ int need_comma, amask, smask;
+
+ need_comma = 0;
+
+ l = (l >> MIPS16OP_SH_IMM6) & MIPS16OP_MASK_IMM6;
+
+ amask = (l >> 3) & 7;
+
+ if (amask > 0 && amask < 5)
+ {
+ (*info->fprintf_func) (info->stream, "%s", mips_gpr_names[4]);
+ if (amask > 1)
+ (*info->fprintf_func) (info->stream, "-%s",
+ mips_gpr_names[amask + 3]);
+ need_comma = 1;
+ }
+
+ smask = (l >> 1) & 3;
+ if (smask == 3)
+ {
+ (*info->fprintf_func) (info->stream, "%s??",
+ need_comma ? "," : "");
+ need_comma = 1;
+ }
+ else if (smask > 0)
+ {
+ (*info->fprintf_func) (info->stream, "%s%s",
+ need_comma ? "," : "",
+ mips_gpr_names[16]);
+ if (smask > 1)
+ (*info->fprintf_func) (info->stream, "-%s",
+ mips_gpr_names[smask + 15]);
+ need_comma = 1;
+ }
+
+ if (l & 1)
+ {
+ (*info->fprintf_func) (info->stream, "%s%s",
+ need_comma ? "," : "",
+ mips_gpr_names[31]);
+ need_comma = 1;
+ }
+
+ if (amask == 5 || amask == 6)
+ {
+ (*info->fprintf_func) (info->stream, "%s$f0",
+ need_comma ? "," : "");
+ if (amask == 6)
+ (*info->fprintf_func) (info->stream, "-$f1");
+ }
+ }
+ break;
+
+ default:
+ /* xgettext:c-format */
+ (*info->fprintf_func)
+ (info->stream,
+ _("# internal disassembler error, unrecognised modifier (%c)"),
+ type);
+ abort ();
+ }
+}
+
+void
+print_mips_disassembler_options (stream)
+ FILE *stream;
+{
+ unsigned int i;
+
+ fprintf (stream, _("\n\
+The following MIPS specific disassembler options are supported for use\n\
+with the -M switch (multiple options should be separated by commas):\n"));
+
+ fprintf (stream, _("\n\
+ gpr-names=ABI Print GPR names according to specified ABI.\n\
+ Default: based on binary being disassembled.\n"));
+
+ fprintf (stream, _("\n\
+ fpr-names=ABI Print FPR names according to specified ABI.\n\
+ Default: numeric.\n"));
+
+ fprintf (stream, _("\n\
+ cp0-names=ARCH Print CP0 register names according to\n\
+ specified architecture.\n\
+ Default: based on binary being disassembled.\n"));
+
+ fprintf (stream, _("\n\
+ hwr-names=ARCH Print HWR names according to specified \n\
+ architecture.\n\
+ Default: based on binary being disassembled.\n"));
+
+ fprintf (stream, _("\n\
+ reg-names=ABI Print GPR and FPR names according to\n\
+ specified ABI.\n"));
+
+ fprintf (stream, _("\n\
+ reg-names=ARCH Print CP0 register and HWR names according to\n\
+ specified architecture.\n"));
+
+ fprintf (stream, _("\n\
+ For the options above, the following values are supported for \"ABI\":\n\
+ "));
+ for (i = 0; i < ARRAY_SIZE (mips_abi_choices); i++)
+ fprintf (stream, " %s", mips_abi_choices[i].name);
+ fprintf (stream, _("\n"));
+
+ fprintf (stream, _("\n\
+ For the options above, The following values are supported for \"ARCH\":\n\
+ "));
+ for (i = 0; i < ARRAY_SIZE (mips_arch_choices); i++)
+ if (*mips_arch_choices[i].name != '\0')
+ fprintf (stream, " %s", mips_arch_choices[i].name);
+ fprintf (stream, _("\n"));
+
+ fprintf (stream, _("\n"));
}