# This file is distributed under the same license as the binutils package.
# Meng Jie <zuxyhere@eastday.com>, 2005.
# Mingye Wang <arthur200126@gmail.com>, 2015.
+# Boyuan Yang <073plan@gmail.com>, 2017, 2018.
#
msgid ""
msgstr ""
-"Project-Id-Version: opcodes 2.24.90\n"
+"Project-Id-Version: opcodes 2.30.0\n"
"Report-Msgid-Bugs-To: bug-binutils@gnu.org\n"
-"POT-Creation-Date: 2014-02-10 09:42+1030\n"
-"PO-Revision-Date: 2015-10-30 09:13-0400\n"
-"Last-Translator: Mingye Wang (Arthur2e5) <arthur200126@gmail.com>\n"
+"POT-Creation-Date: 2018-01-13 13:44+0000\n"
+"PO-Revision-Date: 2018-05-15 21:17+0800\n"
+"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 1.8.4\n"
+"X-Bugs: Report translation errors to the Language-Team address.\n"
+"X-Generator: Poedit 2.0.7\n"
#. Invalid option.
-#. XXX - should break 'option' at following delimiter.
-#: aarch64-dis.c:81 arm-dis.c:4606
+#: aarch64-dis.c:81 arc-dis.c:781 arm-dis.c:6155
#, c-format
msgid "Unrecognised disassembler option: %s\n"
msgstr "无法识别的反汇编器选项:%s\n"
-#: aarch64-dis.c:2395
+#: aarch64-dis.c:3264
#, c-format
msgid ""
"\n"
"\n"
"下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
-#: aarch64-dis.c:2399
+#: aarch64-dis.c:3268
#, c-format
msgid ""
"\n"
"\n"
" no-aliases 不要打印指令别名。\n"
-#: aarch64-dis.c:2402
+#: aarch64-dis.c:3271
#, c-format
msgid ""
"\n"
"\n"
" aliases 要打印指令别名。\n"
-#: aarch64-dis.c:2406
+#: aarch64-dis.c:3275
#, c-format
msgid ""
"\n"
"\n"
" debug_dump 调试跟踪的临时开关。\n"
-#: aarch64-dis.c:2410 mips-dis.c:2231 mips-dis.c:2239 mips-dis.c:2241
+#: aarch64-dis.c:3279 mips-dis.c:2601 mips-dis.c:2609 mips-dis.c:2611
+#: riscv-dis.c:509
#, c-format
msgid "\n"
msgstr "\n"
-#: aarch64-opc.c:1152
+#: aarch64-opc.c:1311
msgid "immediate value"
msgstr "立即数"
-#: aarch64-opc.c:1162
+#: aarch64-opc.c:1321
msgid "immediate offset"
msgstr "立即数偏移"
-#: aarch64-opc.c:1172
+#: aarch64-opc.c:1331
msgid "register number"
msgstr "寄存器数"
-#: aarch64-opc.c:1182
+#: aarch64-opc.c:1341
msgid "register element index"
msgstr "寄存器元素下标"
-#: aarch64-opc.c:1192
+#: aarch64-opc.c:1351
msgid "shift amount"
msgstr "移位操作数"
-#: aarch64-opc.c:1264
+#: aarch64-opc.c:1363
+msgid "multiplier"
+msgstr ""
+
+#: aarch64-opc.c:1436
+msgid "reg pair must start from even reg"
+msgstr ""
+
+#: aarch64-opc.c:1442
+msgid "reg pair must be contiguous"
+msgstr ""
+
+#: aarch64-opc.c:1456
msgid "extraneous register"
msgstr "多余寄存器"
-#: aarch64-opc.c:1269
+#: aarch64-opc.c:1462
msgid "missing register"
msgstr "缺失寄存器"
-#: aarch64-opc.c:1280
+#: aarch64-opc.c:1473
msgid "stack pointer register expected"
msgstr "预期的堆栈指针寄存器"
-#: aarch64-opc.c:1310
+#: aarch64-opc.c:1496
+msgid "z0-z15 expected"
+msgstr "预期为 z0-z15"
+
+#: aarch64-opc.c:1497
+msgid "z0-z7 expected"
+msgstr "预期为 z0-z7"
+
+#: aarch64-opc.c:1523
+#, fuzzy
+#| msgid "Bad register name"
+msgid "invalid register list"
+msgstr "%q+D的寄存器名无效"
+
+#: aarch64-opc.c:1537
+msgid "p0-p7 expected"
+msgstr "预期为 p0-p7"
+
+#: aarch64-opc.c:1563 aarch64-opc.c:1571
msgid "unexpected address writeback"
msgstr "意外的地址写回"
-#: aarch64-opc.c:1321
+#: aarch64-opc.c:1582
msgid "address writeback expected"
msgstr "预期的地址写回"
-#: aarch64-opc.c:1367
+#: aarch64-opc.c:1629
msgid "negative or unaligned offset expected"
msgstr "预期的负或未对齐的偏移量"
-#: aarch64-opc.c:1380
+#: aarch64-opc.c:1656
msgid "invalid register offset"
msgstr "无效的寄存器偏移量"
-#: aarch64-opc.c:1402
+#: aarch64-opc.c:1678
#, fuzzy
msgid "invalid post-increment amount"
msgstr "类型没有后自增运算符"
-#: aarch64-opc.c:1418 aarch64-opc.c:1685
+#: aarch64-opc.c:1694 aarch64-opc.c:2171
msgid "invalid shift amount"
msgstr "无效的移位操作数"
-#: aarch64-opc.c:1431
+#: aarch64-opc.c:1707
#, fuzzy
#| msgid "invalid conditional option"
msgid "invalid extend/shift operator"
msgstr "无效的移位操作符"
-#: aarch64-opc.c:1477 aarch64-opc.c:1551 aarch64-opc.c:1586 aarch64-opc.c:1605
-#: aarch64-opc.c:1613 aarch64-opc.c:1663 aarch64-opc.c:1814
+#: aarch64-opc.c:1753 aarch64-opc.c:1992 aarch64-opc.c:2027 aarch64-opc.c:2046
+#: aarch64-opc.c:2054 aarch64-opc.c:2125 aarch64-opc.c:2301 aarch64-opc.c:2401
+#: aarch64-opc.c:2414
msgid "immediate out of range"
msgstr "立即数越界"
-#: aarch64-opc.c:1539 aarch64-opc.c:1561 aarch64-opc.c:1718 aarch64-opc.c:1726
-#: aarch64-opc.c:1792 aarch64-opc.c:1820
+#: aarch64-opc.c:1775 aarch64-opc.c:1817 aarch64-opc.c:1866 aarch64-opc.c:1900
+msgid "invalid addressing mode"
+msgstr "无效寻址模式"
+
+#: aarch64-opc.c:1858
+#, fuzzy
+msgid "index register xzr is not allowed"
+msgstr "寄存器元素下标"
+
+#: aarch64-opc.c:1980 aarch64-opc.c:2002 aarch64-opc.c:2204 aarch64-opc.c:2212
+#: aarch64-opc.c:2278 aarch64-opc.c:2307
msgid "invalid shift operator"
msgstr "无效的移位操作符"
-#: aarch64-opc.c:1545
-msgid "shift amount expected to be 0 or 12"
-msgstr "移位量预计为 0 或 12"
+#: aarch64-opc.c:1986
+msgid "shift amount must be 0 or 12"
+msgstr "移位量必须为 0 或 12"
-#: aarch64-opc.c:1568
-msgid "shift amount should be a multiple of 16"
-msgstr "移ä½\8dé\87\8fåº\94该是 16 的倍数"
+#: aarch64-opc.c:2009
+msgid "shift amount must be a multiple of 16"
+msgstr "移ä½\8dé\87\8få¿\85é¡»是 16 的倍数"
-#: aarch64-opc.c:1580
+#: aarch64-opc.c:2021
msgid "negative immediate value not allowed"
msgstr "不允许负立即数"
-#: aarch64-opc.c:1674
+#: aarch64-opc.c:2136
#, fuzzy
msgid "immediate zero expected"
msgstr "预期的浮点常量立即数"
-#: aarch64-opc.c:1734
+#: aarch64-opc.c:2150
+#, fuzzy
+#| msgid "shift amount expected to be 0 or 12"
+msgid "rotate expected to be 0, 90, 180 or 270"
+msgstr "移位量预计为 0 或 12"
+
+#: aarch64-opc.c:2160
+#, fuzzy
+#| msgid "shift amount expected to be 0 or 12"
+msgid "rotate expected to be 90 or 270"
+msgstr "移位量预计为 0 或 12"
+
+#: aarch64-opc.c:2220
#, fuzzy
msgid "shift is not permitted"
msgstr "指针不能用作 case 常量"
-#: aarch64-opc.c:1759
-#, fuzzy
-#| msgid "invalid mask field"
+#: aarch64-opc.c:2245
msgid "invalid value for immediate"
-msgstr "不允许负立即数"
+msgstr "无效的立即数的值"
-#: aarch64-opc.c:1784
-#, fuzzy
-msgid "shift amount expected to be 0 or 16"
-msgstr "移位量预计为 0 或 12"
+#: aarch64-opc.c:2270
+msgid "shift amount must be 0 or 16"
+msgstr "移位量必须为 0 或 16"
-#: aarch64-opc.c:1804
+#: aarch64-opc.c:2291
msgid "floating-point immediate expected"
msgstr "预期的浮点常量立即数"
-#: aarch64-opc.c:1895
+#: aarch64-opc.c:2325
+msgid "no shift amount allowed for 8-bit constants"
+msgstr ""
+
+#: aarch64-opc.c:2335
+msgid "shift amount must be 0 or 8"
+msgstr "移位量必须为 0 或 8"
+
+#: aarch64-opc.c:2348
+msgid "immediate too big for element size"
+msgstr ""
+
+#: aarch64-opc.c:2355
+msgid "invalid arithmetic immediate"
+msgstr "无效的算术立即数"
+
+#: aarch64-opc.c:2369
+msgid "floating-point value must be 0.5 or 1.0"
+msgstr "浮点值必须为 0.5 或 1.0"
+
+#: aarch64-opc.c:2379
+msgid "floating-point value must be 0.5 or 2.0"
+msgstr "浮点值必须为 0.5 或 2.0"
+
+#: aarch64-opc.c:2389
+msgid "floating-point value must be 0.0 or 1.0"
+msgstr "浮点值必须为 0.0 或 1.0"
+
+#: aarch64-opc.c:2420
+#, fuzzy
+#| msgid "invalid mask field"
+msgid "invalid replicated MOV immediate"
+msgstr "不允许负立即数"
+
+#: aarch64-opc.c:2535
#, fuzzy
msgid "extend operator expected"
msgstr "需要%<operator%>"
-#: aarch64-opc.c:1908
+#: aarch64-opc.c:2548
#, fuzzy
msgid "missing extend operator"
msgstr "扩展%s 失败"
-#: aarch64-opc.c:1914
-#, fuzzy
+#: aarch64-opc.c:2554
msgid "'LSL' operator not allowed"
-msgstr "不允许 'ROR' 操作符"
+msgstr "不允许 'LSL' 操作符"
-#: aarch64-opc.c:1935
+#: aarch64-opc.c:2575
msgid "W register expected"
msgstr "预期的 W 寄存器"
-#: aarch64-opc.c:1946
+#: aarch64-opc.c:2586
msgid "shift operator expected"
msgstr "预期的移位操作符"
-#: aarch64-opc.c:1953
+#: aarch64-opc.c:2593
msgid "'ROR' operator not allowed"
msgstr "不允许 'ROR' 操作符"
-#: alpha-opc.c:155
+#: alpha-opc.c:154
msgid "branch operand unaligned"
msgstr "分支操作数未对齐"
-#: alpha-opc.c:171 alpha-opc.c:187
+#: alpha-opc.c:170 alpha-opc.c:186
msgid "jump hint unaligned"
msgstr "跳转提示未对齐"
-#: arc-dis.c:75
-#, fuzzy
-msgid "Illegal limm reference in last instruction!\n"
-msgstr "在最后一条指令的非法住参考!"
+#: arc-dis.c:377
+msgid ""
+"\n"
+"Warning: disassembly may be wrong due to guessed opcode class choice.\n"
+"Use -M<class[,class]> to select the correct opcode class(es).\n"
+"\t\t\t\t"
+msgstr ""
-#: arc-opc.c:386
-#, fuzzy
-msgid "unable to fit different valued constants into instruction"
-msgstr "æ\97 æ³\95è\9e\8då\85¥æ\95\99å¦ç\9a\84ä¸\8då\90\8cå\80¼ç\9a\84常æ\95°"
+#: arc-dis.c:823
+#, c-format
+msgid "Unrecognised disassembler CPU option: %s\n"
+msgstr "æ\97 æ³\95è¯\86å\88«ç\9a\84å\8f\8dæ±\87ç¼\96å\99¨ CPU é\80\89项ï¼\9a%s\n"
-#: arc-opc.c:395
-#, fuzzy
-msgid "auxiliary register not allowed here"
-msgstr "在这里不允许使用%<#pragma%>"
+#: arc-dis.c:1385
+#, fuzzy, c-format
+#| msgid ""
+#| "\n"
+#| "The following AARCH64 specific disassembler options are supported for use\n"
+#| "with the -M switch (multiple options should be separated by commas):\n"
+msgid ""
+"\n"
+"The following ARC specific disassembler options are supported for use \n"
+"with -M switch (multiple options should be separated by commas):\n"
+msgstr ""
+"\n"
+"下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
-#: arc-opc.c:401 arc-opc.c:418
-#, fuzzy
-msgid "attempt to set readonly register"
-msgstr "不能设置只读属性"
+#: arc-dis.c:1397
+#, c-format
+msgid " dsp Recognize DSP instructions.\n"
+msgstr " dsp 识别 DSP 指令。\n"
-#: arc-opc.c:406 arc-opc.c:423
-#, fuzzy
-msgid "attempt to read writeonly register"
-msgstr "尝试读取 writeonly 登记册"
+#: arc-dis.c:1399
+#, c-format
+msgid " spfp Recognize FPX SP instructions.\n"
+msgstr " spfp 识别 FPX SP 指令。\n"
+
+#: arc-dis.c:1401
+#, c-format
+msgid " dpfp Recognize FPX DP instructions.\n"
+msgstr " dpfp 识别 FPX DP 指令。\n"
-#: arc-opc.c:428
+#: arc-dis.c:1403
#, fuzzy, c-format
-#| msgid "Bad register name"
-msgid "invalid register number `%d'"
-msgstr "%q+D的寄存器名无效"
+#| msgid ""
+#| "\n"
+#| " msa Recognize MSA instructions.\n"
+msgid " quarkse_em Recognize FPU QuarkSE-EM instructions.\n"
+msgstr ""
+"\n"
+" msa 识别 MSA 指令。\n"
-#: arc-opc.c:594 arc-opc.c:645 arc-opc.c:673
-#, fuzzy
-msgid "too many long constants"
-msgstr "实参太多"
+#: arc-dis.c:1405
+#, fuzzy, c-format
+#| msgid ""
+#| "\n"
+#| " msa Recognize MSA instructions.\n"
+msgid " fpuda Recognize double assist FPU instructions.\n"
+msgstr ""
+"\n"
+" msa 识别 MSA 指令。\n"
-#: arc-opc.c:668
-#, fuzzy
-msgid "too many shimms in load"
-msgstr "重复行过多"
+#: arc-dis.c:1407
+#, c-format
+msgid " fpus Recognize single precision FPU instructions.\n"
+msgstr " fpus 识别单精度 FPU 指令。\n"
-#. Do we have a limm already?
-#: arc-opc.c:781
-#, fuzzy
-msgid "impossible store"
-msgstr "STORE"
+#: arc-dis.c:1409
+#, c-format
+msgid " fpud Recognize double precision FPU instructions.\n"
+msgstr " fpud 识别双精度 FPU 指令。\n"
-#: arc-opc.c:814
-#, fuzzy
-msgid "st operand error"
+#: arc-dis.c:1411
+#, c-format
+msgid " hex Use only hexadecimal number to print immediates.\n"
msgstr ""
-"\n"
-"错误: ILL_ILLOPN (不合法的算符)"
-#: arc-opc.c:818 arc-opc.c:860
-#, fuzzy
-msgid "address writeback not allowed"
-msgstr "意外的地址写回"
+#: arc-opc.c:41 arc-opc.c:64 arc-opc.c:90
+msgid "LP_COUNT register cannot be used as destination register"
+msgstr ""
+
+#: arc-opc.c:88
+msgid "cannot use odd number destination register"
+msgstr ""
+
+#: arc-opc.c:101
+msgid "cannot use odd number source register"
+msgstr ""
-#: arc-opc.c:822
+#: arc-opc.c:114
+msgid "operand is not zero"
+msgstr "操作数不是 0"
+
+#: arc-opc.c:173
#, fuzzy
-#| msgid "immediate value must be even"
-msgid "store value must be zero"
-msgstr "DO 步进值为零"
+msgid "register R30 is a limm indicator"
+msgstr "立即数不能是寄存器"
-#: arc-opc.c:847
+#: arc-opc.c:175
#, fuzzy
-msgid "invalid load/shimm insn"
-msgstr "无效指令:"
+#| msgid "immediate out of range"
+msgid "register out of range"
+msgstr "立即数越界"
+
+#: arc-opc.c:194
+msgid "register must be R0"
+msgstr "寄存器必须是 R0"
+
+#: arc-opc.c:212
+msgid "register must be R1"
+msgstr "寄存器必须是 R1"
+
+#: arc-opc.c:229
+msgid "register must be R2"
+msgstr "寄存器必须是 R2"
+
+#: arc-opc.c:246
+msgid "register must be R3"
+msgstr "寄存器必须是 R3"
-#: arc-opc.c:856
+#: arc-opc.c:263
+msgid "register must be SP"
+msgstr "寄存器必须是 SP"
+
+#: arc-opc.c:280
+msgid "register must be GP"
+msgstr "寄存器必须是 GP"
+
+#: arc-opc.c:297
+msgid "register must be PCL"
+msgstr "寄存器必须是 PCL"
+
+#: arc-opc.c:314
+msgid "register must be BLINK"
+msgstr "寄存器必须是 BLINK"
+
+#: arc-opc.c:331
+msgid "register must be ILINK1"
+msgstr "寄存器必须是 ILINK1"
+
+#: arc-opc.c:348
+msgid "register must be ILINK2"
+msgstr "寄存器必须是 ILINK2"
+
+#. ARC NPS400 Support: See comment near head of file.
+#: arc-opc.c:379 arc-opc.c:417 arc-opc.c:455 arc-opc.c:720
+msgid "register must be either r0-r3 or r12-r15"
+msgstr "寄存器必须是 r0-r3 或 r12-r15"
+
+#: arc-opc.c:506
+msgid "accepted values are from -1 to 6"
+msgstr "可接受的值在 -1 到 6 之间"
+
+#: arc-opc.c:535
#, fuzzy
-msgid "ld operand error"
+#| msgid "Bad register name"
+msgid "first register of the range should be r13"
+msgstr "%q+D的寄存器名无效"
+
+#: arc-opc.c:537
+msgid "last register of the range doesn't fit"
msgstr ""
-"\n"
-"错误: ILL_ILLOPN (不合法的算符)"
-#: arc-opc.c:943
-#, fuzzy
-msgid "jump flags, but no .f seen"
-msgstr " -f --as-flags <flags> 把 <flags> 传递给汇编程序。\n"
+#: arc-opc.c:557 arc-opc.c:572
+msgid "invalid register number, should be fp"
+msgstr "无效的寄存器数,应当为 fp"
+
+#: arc-opc.c:594
+msgid "invalid register number, should be blink"
+msgstr "无效的寄存器数,应当为 blink"
+
+#: arc-opc.c:616
+msgid "invalid register number, should be pcl"
+msgstr "无效的寄存器数,应当为 pcl"
-#: arc-opc.c:946
+#: arc-opc.c:768
+msgid "invalid size, should be 1, 2, 4, or 8"
+msgstr "无效的大小,应当为 1、2、4 或 8"
+
+#: arc-opc.c:813
+msgid "invalid immediate, must be 1, 2, or 4"
+msgstr "无效的立即数,应当为 1、2 或 4"
+
+#: arc-opc.c:852
#, fuzzy
-msgid "jump flags, but no limm addr"
-msgstr "跳的旗帜,但没有住地址"
+#| msgid "invalid mask field"
+msgid "invalid value for CMEM ld/st immediate"
+msgstr "不允许负立即数"
-#: arc-opc.c:949
+#: arc-opc.c:879
+msgid "invalid position, should be 0, 16, 32, 48 or 64."
+msgstr "无效的位置,应当为 0、16、32、48 或 64。"
+
+#: arc-opc.c:913
+msgid "invalid position, should be 16, 32, 64 or 128."
+msgstr "无效的位置,应当为 16、32、64 或 128。"
+
+#: arc-opc.c:935
#, fuzzy
-msgid "flag bits of jump address limm lost"
-msgstr "标志位的跳转地址住失去了"
+#| msgid "immediate value out of range"
+msgid "invalid size value must be on range 1-64."
+msgstr "立即数越界"
-#: arc-opc.c:952
+#: arc-opc.c:966
#, fuzzy
-msgid "attempt to set HR bits"
-msgstr "<无法识别的标志位集合>"
+#| msgid "Invalid position, should be 0, 8, 16, or 24"
+msgid "invalid position, should be 0, 8, 16, or 24"
+msgstr "无效的位置,应当为 0、8、16 或 24"
+
+#: arc-opc.c:991
+msgid "invalid size, value must be "
+msgstr "无效的大小,值必须为 "
+
+#: arc-opc.c:1065
+msgid "value out of range 1 - 256"
+msgstr "值越界 1 - 256"
+
+#: arc-opc.c:1074
+msgid "value must be power of 2"
+msgstr "值必须是 2 的倍数"
+
+#: arc-opc.c:1127
+msgid "value must be in the range 0 to 28"
+msgstr "值必须在 0 到 28 的范围中"
+
+#: arc-opc.c:1149
+msgid "value must be in the range 1 to "
+msgstr "值的范围必须在 1 到 "
+
+#: arc-opc.c:1179
+msgid "value must be in the range 0 to 240"
+msgstr "值必须在 0 到 240 的范围中"
+
+#: arc-opc.c:1181
+msgid "value must be a multiple of 16"
+msgstr "值必须是 16 的倍数"
-#: arc-opc.c:955
+#: arc-opc.c:1201
#, fuzzy
-msgid "bad jump flags value"
-msgstr "错误的ai_flags 值"
+msgid "invalid address type for operand"
+msgstr "无效寻址模式"
+
+#: arc-opc.c:1235
+msgid "value must be in the range 0 to 31"
+msgstr "值必须在 0 到 31 的范围中"
+
+#: arc-opc.c:1260
+msgid "invalid position, should be one of: 0,4,8,...124."
+msgstr "无效的位置,应当为 0、4、8、...、124。"
+
+#: arm-dis.c:3229
+msgid "Select raw register names"
+msgstr "选择原始寄存器名称"
+
+#: arm-dis.c:3231
+msgid "Select register names used by GCC"
+msgstr "选择 GCC 使用的寄存器名称"
+
+#: arm-dis.c:3233
+msgid "Select register names used in ARM's ISA documentation"
+msgstr "选择 ARM 的 ISA 文档中使用的寄存器名称"
+
+#: arm-dis.c:3235
+msgid "Assume all insns are Thumb insns"
+msgstr ""
+
+#: arm-dis.c:3236
+msgid "Examine preceding label to determine an insn's type"
+msgstr ""
-#: arc-opc.c:988
+#: arm-dis.c:3237
#, fuzzy
-msgid "branch address not on 4 byte boundary"
-msgstr "将函数强行对齐到 4 字节边界上"
+#| msgid "register number must be even"
+msgid "Select register names used in the APCS"
+msgstr "立即数不能是寄存器"
-#: arc-opc.c:1024
+#: arm-dis.c:3239
#, fuzzy
-msgid "must specify .jd or no nullify suffix"
-msgstr "必须指定.jd 或无 nullify 后缀"
+#| msgid "register number must be even"
+msgid "Select register names used in the ATPCS"
+msgstr "立即数不能是寄存器"
-#: arm-dis.c:2145
+#: arm-dis.c:3241
+msgid "Select special register names used in the ATPCS"
+msgstr "选择 ATPCS 中使用的特殊寄存器名称"
+
+#: arm-dis.c:3639
msgid "<illegal precision>"
msgstr "<非法的精度>"
-#. XXX - should break 'option' at following delimiter.
-#: arm-dis.c:4598
+#: arm-dis.c:6148
#, c-format
msgid "Unrecognised register name set: %s\n"
msgstr "无法识别的寄存器名称集:%s\n"
-#: arm-dis.c:5208
+#: arm-dis.c:6852
#, c-format
msgid ""
"\n"
msgid "undefined"
msgstr "未定义"
-#: avr-dis.c:198
+#: avr-dis.c:215
#, c-format
msgid "Internal disassembler error"
msgstr "反汇编器内部错误"
-#: avr-dis.c:251
+#: avr-dis.c:268
#, c-format
msgid "unknown constraint `%c'"
msgstr "未知的约束‘%c’"
-#: cgen-asm.c:352 epiphany-ibld.c:201 fr30-ibld.c:201 frv-ibld.c:201
+#: cgen-asm.c:351 epiphany-ibld.c:201 fr30-ibld.c:201 frv-ibld.c:201
#: ip2k-ibld.c:201 iq2000-ibld.c:201 lm32-ibld.c:201 m32c-ibld.c:201
-#: m32r-ibld.c:201 mep-ibld.c:201 mt-ibld.c:201 openrisc-ibld.c:201
+#: m32r-ibld.c:201 mep-ibld.c:201 mt-ibld.c:201 or1k-ibld.c:201
#: xc16x-ibld.c:201 xstormy16-ibld.c:201
#, c-format
msgid "operand out of range (%ld not between %ld and %ld)"
msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"
-#: cgen-asm.c:374
+#: cgen-asm.c:373
#, c-format
msgid "operand out of range (%lu not between %lu and %lu)"
msgstr "操作数越界(%lu 不在 %lu 和 %lu 之间)"
-#: d30v-dis.c:255
+#: d30v-dis.c:254
#, c-format
msgid "<unknown register %d>"
msgstr "<未知的寄存器 %d>"
#. Can't happen.
-#: dis-buf.c:60
+#: dis-buf.c:61
#, c-format
msgid "Unknown error %d\n"
msgstr "未知错误 %d\n"
-#: dis-buf.c:69
+#: dis-buf.c:70
#, c-format
msgid "Address 0x%s is out of bounds.\n"
msgstr "地址 0x%s 越界。\n"
msgstr "立即数不能是寄存器"
#: epiphany-asm.c:187
-#, fuzzy
msgid "byte relocation unsupported"
-msgstr "不支持的 .stab 重定位"
+msgstr "不支持字节重定位"
#. -- assembler routines inserted here.
#. -- asm.c
#: lm32-asm.c:127 lm32-asm.c:157 lm32-asm.c:187 lm32-asm.c:217 lm32-asm.c:247
#: m32c-asm.c:140 m32c-asm.c:235 m32c-asm.c:276 m32c-asm.c:334 m32c-asm.c:355
#: m32r-asm.c:53 mep-asm.c:241 mep-asm.c:259 mep-asm.c:274 mep-asm.c:289
-#: mep-asm.c:301 openrisc-asm.c:54
+#: mep-asm.c:301 or1k-asm.c:54
msgid "missing `)'"
msgstr "缺少‘)’"
#: epiphany-asm.c:270
-#, fuzzy
msgid "ABORT: unknown operand"
-msgstr "正在进行放弃"
+msgstr "中止:未知的操作数"
#: epiphany-asm.c:296
#, fuzzy
#: epiphany-asm.c:455 fr30-asm.c:310 frv-asm.c:1263 ip2k-asm.c:511
#: iq2000-asm.c:459 lm32-asm.c:349 m32c-asm.c:1584 m32r-asm.c:328
-#: mep-asm.c:1286 mt-asm.c:595 openrisc-asm.c:241 xc16x-asm.c:376
+#: mep-asm.c:1287 mt-asm.c:595 or1k-asm.c:503 xc16x-asm.c:376
#: xstormy16-asm.c:276
#, fuzzy, c-format
msgid "Unrecognized field %d while parsing.\n"
#: epiphany-asm.c:506 fr30-asm.c:361 frv-asm.c:1314 ip2k-asm.c:562
#: iq2000-asm.c:510 lm32-asm.c:400 m32c-asm.c:1635 m32r-asm.c:379
-#: mep-asm.c:1337 mt-asm.c:646 openrisc-asm.c:292 xc16x-asm.c:427
+#: mep-asm.c:1338 mt-asm.c:646 or1k-asm.c:554 xc16x-asm.c:427
#: xstormy16-asm.c:327
msgid "missing mnemonic in syntax string"
msgstr "语法字符串中没有助记符"
#: iq2000-asm.c:738 iq2000-asm.c:845 lm32-asm.c:535 lm32-asm.c:539
#: lm32-asm.c:628 lm32-asm.c:735 m32c-asm.c:1770 m32c-asm.c:1774
#: m32c-asm.c:1863 m32c-asm.c:1970 m32r-asm.c:514 m32r-asm.c:518
-#: m32r-asm.c:607 m32r-asm.c:714 mep-asm.c:1472 mep-asm.c:1476 mep-asm.c:1565
-#: mep-asm.c:1672 mt-asm.c:781 mt-asm.c:785 mt-asm.c:874 mt-asm.c:981
-#: openrisc-asm.c:427 openrisc-asm.c:431 openrisc-asm.c:520 openrisc-asm.c:627
-#: xc16x-asm.c:562 xc16x-asm.c:566 xc16x-asm.c:655 xc16x-asm.c:762
-#: xstormy16-asm.c:462 xstormy16-asm.c:466 xstormy16-asm.c:555
-#: xstormy16-asm.c:662
+#: m32r-asm.c:607 m32r-asm.c:714 mep-asm.c:1473 mep-asm.c:1477 mep-asm.c:1566
+#: mep-asm.c:1673 mt-asm.c:781 mt-asm.c:785 mt-asm.c:874 mt-asm.c:981
+#: or1k-asm.c:689 or1k-asm.c:693 or1k-asm.c:782 or1k-asm.c:889 xc16x-asm.c:562
+#: xc16x-asm.c:566 xc16x-asm.c:655 xc16x-asm.c:762 xstormy16-asm.c:462
+#: xstormy16-asm.c:466 xstormy16-asm.c:555 xstormy16-asm.c:662
msgid "unrecognized instruction"
msgstr "无法识别的指令"
#: epiphany-asm.c:688 fr30-asm.c:543 frv-asm.c:1496 ip2k-asm.c:744
#: iq2000-asm.c:692 lm32-asm.c:582 m32c-asm.c:1817 m32r-asm.c:561
-#: mep-asm.c:1519 mt-asm.c:828 openrisc-asm.c:474 xc16x-asm.c:609
+#: mep-asm.c:1520 mt-asm.c:828 or1k-asm.c:736 xc16x-asm.c:609
#: xstormy16-asm.c:509
#, c-format
msgid "syntax error (expected char `%c', found `%c')"
#: epiphany-asm.c:698 fr30-asm.c:553 frv-asm.c:1506 ip2k-asm.c:754
#: iq2000-asm.c:702 lm32-asm.c:592 m32c-asm.c:1827 m32r-asm.c:571
-#: mep-asm.c:1529 mt-asm.c:838 openrisc-asm.c:484 xc16x-asm.c:619
+#: mep-asm.c:1530 mt-asm.c:838 or1k-asm.c:746 xc16x-asm.c:619
#: xstormy16-asm.c:519
#, c-format
msgid "syntax error (expected char `%c', found end of instruction)"
#: epiphany-asm.c:728 fr30-asm.c:583 frv-asm.c:1536 ip2k-asm.c:784
#: iq2000-asm.c:732 lm32-asm.c:622 m32c-asm.c:1857 m32r-asm.c:601
-#: mep-asm.c:1559 mt-asm.c:868 openrisc-asm.c:514 xc16x-asm.c:649
+#: mep-asm.c:1560 mt-asm.c:868 or1k-asm.c:776 xc16x-asm.c:649
#: xstormy16-asm.c:549
msgid "junk at end of line"
msgstr "行尾有垃圾字符"
#: epiphany-asm.c:840 fr30-asm.c:695 frv-asm.c:1648 ip2k-asm.c:896
#: iq2000-asm.c:844 lm32-asm.c:734 m32c-asm.c:1969 m32r-asm.c:713
-#: mep-asm.c:1671 mt-asm.c:980 openrisc-asm.c:626 xc16x-asm.c:761
+#: mep-asm.c:1672 mt-asm.c:980 or1k-asm.c:888 xc16x-asm.c:761
#: xstormy16-asm.c:661
msgid "unrecognized form of instruction"
msgstr "无法识别的指令格式"
#: epiphany-asm.c:854 fr30-asm.c:709 frv-asm.c:1662 ip2k-asm.c:910
#: iq2000-asm.c:858 lm32-asm.c:748 m32c-asm.c:1983 m32r-asm.c:727
-#: mep-asm.c:1685 mt-asm.c:994 openrisc-asm.c:640 xc16x-asm.c:775
+#: mep-asm.c:1686 mt-asm.c:994 or1k-asm.c:902 xc16x-asm.c:775
#: xstormy16-asm.c:675
#, c-format
msgid "bad instruction `%.50s...'"
#: epiphany-asm.c:857 fr30-asm.c:712 frv-asm.c:1665 ip2k-asm.c:913
#: iq2000-asm.c:861 lm32-asm.c:751 m32c-asm.c:1986 m32r-asm.c:730
-#: mep-asm.c:1688 mt-asm.c:997 openrisc-asm.c:643 xc16x-asm.c:778
+#: mep-asm.c:1689 mt-asm.c:997 or1k-asm.c:905 xc16x-asm.c:778
#: xstormy16-asm.c:678
#, c-format
msgid "bad instruction `%.50s'"
#. Default text to print if an instruction isn't recognized.
#: epiphany-dis.c:41 fr30-dis.c:41 frv-dis.c:41 ip2k-dis.c:41 iq2000-dis.c:41
#: lm32-dis.c:41 m32c-dis.c:41 m32r-dis.c:41 mep-dis.c:41 mmix-dis.c:276
-#: mt-dis.c:41 nds32-dis.c:56 openrisc-dis.c:41 xc16x-dis.c:41
-#: xstormy16-dis.c:41
+#: mt-dis.c:41 nds32-dis.c:39 or1k-dis.c:41 xc16x-dis.c:41 xstormy16-dis.c:41
msgid "*unknown*"
msgstr "*未知*"
-#: epiphany-dis.c:277 fr30-dis.c:299 frv-dis.c:396 ip2k-dis.c:288
+#: epiphany-dis.c:278 fr30-dis.c:299 frv-dis.c:396 ip2k-dis.c:288
#: iq2000-dis.c:189 lm32-dis.c:147 m32c-dis.c:891 m32r-dis.c:279
-#: mep-dis.c:1187 mt-dis.c:290 openrisc-dis.c:135 xc16x-dis.c:420
+#: mep-dis.c:1187 mt-dis.c:290 or1k-dis.c:141 xc16x-dis.c:420
#: xstormy16-dis.c:168
#, c-format
msgid "Unrecognized field %d while printing insn.\n"
#: epiphany-ibld.c:164 fr30-ibld.c:164 frv-ibld.c:164 ip2k-ibld.c:164
#: iq2000-ibld.c:164 lm32-ibld.c:164 m32c-ibld.c:164 m32r-ibld.c:164
-#: mep-ibld.c:164 mt-ibld.c:164 openrisc-ibld.c:164 xc16x-ibld.c:164
+#: mep-ibld.c:164 mt-ibld.c:164 or1k-ibld.c:164 xc16x-ibld.c:164
#: xstormy16-ibld.c:164
#, c-format
msgid "operand out of range (%ld not between %ld and %lu)"
#: epiphany-ibld.c:185 fr30-ibld.c:185 frv-ibld.c:185 ip2k-ibld.c:185
#: iq2000-ibld.c:185 lm32-ibld.c:185 m32c-ibld.c:185 m32r-ibld.c:185
-#: mep-ibld.c:185 mt-ibld.c:185 openrisc-ibld.c:185 xc16x-ibld.c:185
+#: mep-ibld.c:185 mt-ibld.c:185 or1k-ibld.c:185 xc16x-ibld.c:185
#: xstormy16-ibld.c:185
#, fuzzy, c-format
#| msgid "operand out of range (%lu not between 0 and %lu)"
msgid "operand out of range (0x%lx not between 0 and 0x%lx)"
msgstr "操作数超出范围 (0x %lx 请不是 0 和 0x %lx 之间)"
-#: epiphany-ibld.c:872 fr30-ibld.c:727 frv-ibld.c:853 ip2k-ibld.c:604
-#: iq2000-ibld.c:710 lm32-ibld.c:631 m32c-ibld.c:1728 m32r-ibld.c:662
-#: mep-ibld.c:1205 mt-ibld.c:746 openrisc-ibld.c:630 xc16x-ibld.c:749
-#: xstormy16-ibld.c:675
+#: epiphany-ibld.c:879 fr30-ibld.c:734 frv-ibld.c:860 ip2k-ibld.c:611
+#: iq2000-ibld.c:717 lm32-ibld.c:638 m32c-ibld.c:1735 m32r-ibld.c:669
+#: mep-ibld.c:1212 mt-ibld.c:753 or1k-ibld.c:650 xc16x-ibld.c:756
+#: xstormy16-ibld.c:682
#, c-format
msgid "Unrecognized field %d while building insn.\n"
msgstr "建立 insn 时遇到无法识别的字段 %d。\n"
-#: epiphany-ibld.c:1166 fr30-ibld.c:932 frv-ibld.c:1170 ip2k-ibld.c:679
-#: iq2000-ibld.c:885 lm32-ibld.c:735 m32c-ibld.c:2889 m32r-ibld.c:799
-#: mep-ibld.c:1804 mt-ibld.c:966 openrisc-ibld.c:730 xc16x-ibld.c:969
-#: xstormy16-ibld.c:821
+#: epiphany-ibld.c:1173 fr30-ibld.c:939 frv-ibld.c:1177 ip2k-ibld.c:686
+#: iq2000-ibld.c:892 lm32-ibld.c:742 m32c-ibld.c:2896 m32r-ibld.c:806
+#: mep-ibld.c:1811 mt-ibld.c:973 or1k-ibld.c:755 xc16x-ibld.c:976
+#: xstormy16-ibld.c:828
#, c-format
msgid "Unrecognized field %d while decoding insn.\n"
msgstr "解码 insn 时遇到无法识别的字段 %d。\n"
-#: epiphany-ibld.c:1309 fr30-ibld.c:1078 frv-ibld.c:1448 ip2k-ibld.c:753
-#: iq2000-ibld.c:1016 lm32-ibld.c:824 m32c-ibld.c:3506 m32r-ibld.c:912
-#: mep-ibld.c:2274 mt-ibld.c:1166 openrisc-ibld.c:807 xc16x-ibld.c:1190
-#: xstormy16-ibld.c:931
+#: epiphany-ibld.c:1316 fr30-ibld.c:1085 frv-ibld.c:1455 ip2k-ibld.c:760
+#: iq2000-ibld.c:1023 lm32-ibld.c:831 m32c-ibld.c:3513 m32r-ibld.c:919
+#: mep-ibld.c:2281 mt-ibld.c:1173 or1k-ibld.c:838 xc16x-ibld.c:1197
+#: xstormy16-ibld.c:938
#, c-format
msgid "Unrecognized field %d while getting int operand.\n"
msgstr "获得 int 操作数时遇到无法识别的字段 %d。\n"
-#: epiphany-ibld.c:1434 fr30-ibld.c:1206 frv-ibld.c:1708 ip2k-ibld.c:809
-#: iq2000-ibld.c:1129 lm32-ibld.c:895 m32c-ibld.c:4105 m32r-ibld.c:1007
-#: mep-ibld.c:2726 mt-ibld.c:1348 openrisc-ibld.c:866 xc16x-ibld.c:1393
-#: xstormy16-ibld.c:1023
+#: epiphany-ibld.c:1441 fr30-ibld.c:1213 frv-ibld.c:1715 ip2k-ibld.c:816
+#: iq2000-ibld.c:1136 lm32-ibld.c:902 m32c-ibld.c:4112 m32r-ibld.c:1014
+#: mep-ibld.c:2733 mt-ibld.c:1355 or1k-ibld.c:903 xc16x-ibld.c:1400
+#: xstormy16-ibld.c:1030
#, c-format
msgid "Unrecognized field %d while getting vma operand.\n"
msgstr "获得 vma 操作数时遇到无法识别的字段 %d。\n"
-#: epiphany-ibld.c:1566 fr30-ibld.c:1337 frv-ibld.c:1975 ip2k-ibld.c:868
-#: iq2000-ibld.c:1249 lm32-ibld.c:973 m32c-ibld.c:4692 m32r-ibld.c:1108
-#: mep-ibld.c:3139 mt-ibld.c:1537 openrisc-ibld.c:932 xc16x-ibld.c:1597
-#: xstormy16-ibld.c:1122
+#: epiphany-ibld.c:1573 fr30-ibld.c:1344 frv-ibld.c:1982 ip2k-ibld.c:875
+#: iq2000-ibld.c:1256 lm32-ibld.c:980 m32c-ibld.c:4699 m32r-ibld.c:1115
+#: mep-ibld.c:3146 mt-ibld.c:1544 or1k-ibld.c:975 xc16x-ibld.c:1604
+#: xstormy16-ibld.c:1129
#, c-format
msgid "Unrecognized field %d while setting int operand.\n"
msgstr "设置 int 操作数时遇到无法识别的字段 %d。\n"
-#: epiphany-ibld.c:1688 fr30-ibld.c:1458 frv-ibld.c:2232 ip2k-ibld.c:917
-#: iq2000-ibld.c:1359 lm32-ibld.c:1041 m32c-ibld.c:5269 m32r-ibld.c:1199
-#: mep-ibld.c:3542 mt-ibld.c:1716 openrisc-ibld.c:988 xc16x-ibld.c:1791
-#: xstormy16-ibld.c:1211
+#: epiphany-ibld.c:1695 fr30-ibld.c:1465 frv-ibld.c:2239 ip2k-ibld.c:924
+#: iq2000-ibld.c:1366 lm32-ibld.c:1048 m32c-ibld.c:5276 m32r-ibld.c:1206
+#: mep-ibld.c:3549 mt-ibld.c:1723 or1k-ibld.c:1037 xc16x-ibld.c:1798
+#: xstormy16-ibld.c:1218
#, c-format
msgid "Unrecognized field %d while setting vma operand.\n"
msgstr "设置 vma 操作数时遇到无法识别的字段 %d。\n"
#: fr30-asm.c:93 m32c-asm.c:872 m32c-asm.c:879
-#, fuzzy
-#| msgid "register number must be even"
msgid "Register number is not valid"
-msgstr "å¯\84å\98å\99¨æ\95°å¿\85é¡»æ\98¯å\81¶æ\95°"
+msgstr "å¯\84å\98å\99¨æ\95°å\97æ\97 æ\95\88"
#: fr30-asm.c:95
-#, fuzzy
-#| msgid "register number must be even"
msgid "Register must be between r0 and r7"
-msgstr "登记册必须 r0 和 r7 之间"
+msgstr "寄存器必须 r0 和 r7 之间"
#: fr30-asm.c:97
-#, fuzzy
-#| msgid "register number must be even"
msgid "Register must be between r8 and r15"
-msgstr "登记册必须 r8 和 r15 之间"
+msgstr "寄存器必须 r8 和 r15 之间"
#: fr30-asm.c:116 m32c-asm.c:910
-#, fuzzy
msgid "Register list is not valid"
-msgstr "注册"
+msgstr "寄存器列表无效"
#: frv-asm.c:608
msgid "missing `]'"
msgid "register number must be even"
msgstr "寄存器数必须是偶数"
-#: h8300-dis.c:314
+#: h8300-dis.c:313
#, c-format
msgid "Hmmmm 0x%x"
msgstr "咦... 0x%x"
-#: h8300-dis.c:695
-#, fuzzy, c-format
+#: h8300-dis.c:690
+#, c-format
msgid "Don't understand 0x%x \n"
-msgstr "无法识别的重定位类型 0x%x"
+msgstr "无法识别 0x%x \n"
-#: h8500-dis.c:124
+#: h8500-dis.c:123
#, fuzzy, c-format
msgid "can't cope with insert %d\n"
msgstr "无法清除未激活的密钥 %d。\n"
#. Couldn't understand anything.
-#: h8500-dis.c:324
+#: h8500-dis.c:323
#, c-format
msgid "%02x\t\t*unknown*"
msgstr "%02x\t\t*未知*"
-#: i386-dis.c:11550
+#: i386-dis.c:12330
msgid "<internal disassembler error>"
msgstr "<反汇编器内部错误>"
-#: i386-dis.c:11859
+#: i386-dis.c:12625
#, c-format
msgid ""
"\n"
"\n"
"下列 i386/x86-64 特定的反汇编器选项在使用 -M 开关时可用(使用逗号分隔多个选项):\n"
-#: i386-dis.c:11863
-#, fuzzy, c-format
+#: i386-dis.c:12629
+#, c-format
msgid " x86-64 Disassemble in 64bit mode\n"
-msgstr "生成 64 位 x86-64 代码"
+msgstr " x86-64 在 64 位模式下反汇编\n"
-#: i386-dis.c:11864
-#, fuzzy, c-format
+#: i386-dis.c:12630
+#, c-format
msgid " i386 Disassemble in 32bit mode\n"
-msgstr "生成 32 位 i386 代码"
+msgstr " i386 在 32 位模式下反汇编\n"
-#: i386-dis.c:11865
+#: i386-dis.c:12631
#, c-format
msgid " i8086 Disassemble in 16bit mode\n"
msgstr " i8086 在 16 位模式下反汇编\n"
-#: i386-dis.c:11866
+#: i386-dis.c:12632
#, c-format
msgid " att Display instruction in AT&T syntax\n"
msgstr " att 用 AT&T 语法显示指令\n"
-#: i386-dis.c:11867
+#: i386-dis.c:12633
#, c-format
msgid " intel Display instruction in Intel syntax\n"
msgstr " intel 用 Intel 语法显示指令\n"
-#: i386-dis.c:11868
+#: i386-dis.c:12634
#, fuzzy, c-format
msgid ""
" att-mnemonic\n"
" Display instruction in AT&T mnemonic\n"
msgstr " att 用 AT&T 语法显示指令\n"
-#: i386-dis.c:11870
+#: i386-dis.c:12636
#, fuzzy, c-format
msgid ""
" intel-mnemonic\n"
" Display instruction in Intel mnemonic\n"
msgstr " intel 用 Intel 语法显示指令\n"
-#: i386-dis.c:11872
+#: i386-dis.c:12638
#, c-format
msgid " addr64 Assume 64bit address size\n"
msgstr " addr64 假定 64 位地址大小\n"
-#: i386-dis.c:11873
+#: i386-dis.c:12639
#, c-format
msgid " addr32 Assume 32bit address size\n"
msgstr " addr32 假定 32 位地址大小\n"
-#: i386-dis.c:11874
+#: i386-dis.c:12640
#, c-format
msgid " addr16 Assume 16bit address size\n"
msgstr " addr16 假定 16 位地址大小\n"
-#: i386-dis.c:11875
+#: i386-dis.c:12641
#, c-format
msgid " data32 Assume 32bit data size\n"
msgstr " data32 假定 32 位数据大小\n"
-#: i386-dis.c:11876
+#: i386-dis.c:12642
#, c-format
msgid " data16 Assume 16bit data size\n"
msgstr " data16 假定 16 位数据大小\n"
-#: i386-dis.c:11877
+#: i386-dis.c:12643
#, c-format
msgid " suffix Always display instruction suffix in AT&T syntax\n"
msgstr " suffix 在 AT&T 语法中始终显示指令后缀\n"
-#: i386-gen.c:560 ia64-gen.c:307
+#: i386-dis.c:12644
+#, fuzzy, c-format
+#| msgid " att Display instruction in AT&T syntax\n"
+msgid " amd64 Display instruction in AMD64 ISA\n"
+msgstr " att 用 AT&T 语法显示指令\n"
+
+#: i386-dis.c:12645
+#, fuzzy, c-format
+#| msgid " intel Display instruction in Intel syntax\n"
+msgid " intel64 Display instruction in Intel64 ISA\n"
+msgstr " intel 用 Intel 语法显示指令\n"
+
+#: i386-dis.c:13190
+msgid "64-bit address is disabled"
+msgstr "64 位地址已禁用"
+
+#: i386-gen.c:711 ia64-gen.c:306
#, c-format
msgid "%s: Error: "
msgstr "%s:错误:"
-#: i386-gen.c:692
+#: i386-gen.c:890
#, fuzzy, c-format
msgid "%s: %d: Unknown bitfield: %s\n"
msgstr "行 %d:未知标签:%s\n"
-#: i386-gen.c:694
+#: i386-gen.c:892
#, fuzzy, c-format
#| msgid "Unknown error %d\n"
msgid "Unknown bitfield: %s\n"
msgstr "%s:未知函数‘%u’\n"
-#: i386-gen.c:750
+#: i386-gen.c:955
#, fuzzy, c-format
msgid "%s: %d: Missing `)' in bitfield: %s\n"
msgstr "缺少 %s%d %s:%s\n"
-#: i386-gen.c:1015
+#: i386-gen.c:1256
#, fuzzy, c-format
msgid "can't find i386-opc.tbl for reading, errno = %s\n"
msgstr "找不到阅读,errno i386 opc.tbl = %s"
-#: i386-gen.c:1146
+#: i386-gen.c:1387
#, fuzzy, c-format
msgid "can't find i386-reg.tbl for reading, errno = %s\n"
msgstr "找不到阅读,errno i386 reg.tbl = %s"
-#: i386-gen.c:1223
+#: i386-gen.c:1465
#, fuzzy, c-format
msgid "can't create i386-init.h, errno = %s\n"
msgstr "无法创建 i386-init.h,errno = %s"
-#: i386-gen.c:1312 ia64-gen.c:2830
+#: i386-gen.c:1555 ia64-gen.c:2829
#, c-format
msgid "unable to change directory to \"%s\", errno = %s\n"
msgstr "无法将当前目录切换至“%s”,errno = %s\n"
-#: i386-gen.c:1319
-#, fuzzy, c-format
+#: i386-gen.c:1567 i386-gen.c:1570
+#, c-format
+msgid "CpuMax != %d!\n"
+msgstr ""
+
+#: i386-gen.c:1574
+#, c-format
msgid "%d unused bits in i386_cpu_flags.\n"
-msgstr "%d 未使用的钻头在 i386_cpu_flags。"
+msgstr ""
-#: i386-gen.c:1326
+#: i386-gen.c:1581
#, fuzzy, c-format
msgid "%d unused bits in i386_operand_type.\n"
msgstr "%d 未使用的钻头在 i386_operand_type。"
-#: i386-gen.c:1340
-#, fuzzy, c-format
+#: i386-gen.c:1595
+#, c-format
msgid "can't create i386-tbl.h, errno = %s\n"
-msgstr "无法创建 i386-tbl.h,errno = %s"
+msgstr "无法创建 i386-tbl.h,errno = %s\n"
-#: ia64-gen.c:320
+#: ia64-gen.c:319
#, c-format
msgid "%s: Warning: "
msgstr "%s:警告:"
-#: ia64-gen.c:506 ia64-gen.c:737
+#: ia64-gen.c:505 ia64-gen.c:736
#, fuzzy, c-format
msgid "multiple note %s not handled\n"
msgstr "%s:多次重复定义符号“%s”"
-#: ia64-gen.c:617
+#: ia64-gen.c:616
#, fuzzy
msgid "can't find ia64-ic.tbl for reading\n"
msgstr "找不到 ia64 ic.tbl 阅读"
-#: ia64-gen.c:819
+#: ia64-gen.c:818
#, fuzzy, c-format
msgid "can't find %s for reading\n"
msgstr "%s:无法找到模块文件 %s\n"
-#: ia64-gen.c:1051
+#: ia64-gen.c:1050
#, fuzzy, c-format
msgid ""
"most recent format '%s'\n"
"appears more restrictive than '%s'\n"
msgstr "最新格式 %s 似乎比 %s 的限制性更强"
-#: ia64-gen.c:1062
+#: ia64-gen.c:1061
#, fuzzy, c-format
msgid "overlapping field %s->%s\n"
msgstr "缺少字段‘%s’,在‘%s’中"
-#: ia64-gen.c:1259
+#: ia64-gen.c:1258
#, fuzzy, c-format
msgid "overwriting note %d with note %d (IC:%s)\n"
msgstr "用注 %d (IC:%s) 覆盖注 %d"
-#: ia64-gen.c:1466
+#: ia64-gen.c:1465
#, c-format
msgid "don't know how to specify %% dependency %s\n"
msgstr "不知道如何指定 %% 依赖 %s\n"
-#: ia64-gen.c:1488
+#: ia64-gen.c:1487
#, c-format
msgid "Don't know how to specify # dependency %s\n"
msgstr "不知道如何指定 # 依赖 %s\n"
-#: ia64-gen.c:1527
+#: ia64-gen.c:1526
#, fuzzy, c-format
msgid "IC:%s [%s] has no terminals or sub-classes\n"
msgstr "IC:%s [%s] 没有任何终端或子类"
-#: ia64-gen.c:1530
+#: ia64-gen.c:1529
#, fuzzy, c-format
msgid "IC:%s has no terminals or sub-classes\n"
msgstr "IC:%s 有没有终端或子类"
-#: ia64-gen.c:1539
+#: ia64-gen.c:1538
#, fuzzy, c-format
msgid "no insns mapped directly to terminal IC %s [%s]"
msgstr "没有 insn 被直接映射到终端 IC %s [%s]"
-#: ia64-gen.c:1542
+#: ia64-gen.c:1541
#, fuzzy, c-format
msgid "no insns mapped directly to terminal IC %s\n"
msgstr "没有 insn 被直接映射到终端 IC %s\n"
-#: ia64-gen.c:1553
+#: ia64-gen.c:1552
#, fuzzy, c-format
msgid "class %s is defined but not used\n"
msgstr "%q+D定义后未使用"
-#: ia64-gen.c:1566
+#: ia64-gen.c:1565
#, fuzzy, c-format
msgid "Warning: rsrc %s (%s) has no chks\n"
msgstr "警告:%s 节的大小为零"
-#: ia64-gen.c:1569
+#: ia64-gen.c:1568
#, fuzzy, c-format
msgid "Warning: rsrc %s (%s) has no chks or regs\n"
msgstr "指数部分没有数字"
-#: ia64-gen.c:1573
+#: ia64-gen.c:1572
#, fuzzy, c-format
msgid "rsrc %s (%s) has no regs\n"
msgstr "%s 已不可访问"
-#: ia64-gen.c:2465
+#: ia64-gen.c:2464
#, c-format
msgid "IC note %d in opcode %s (IC:%s) conflicts with resource %s note %d\n"
msgstr ""
-#: ia64-gen.c:2493
+#: ia64-gen.c:2492
#, c-format
msgid "IC note %d for opcode %s (IC:%s) conflicts with resource %s note %d\n"
msgstr ""
-#: ia64-gen.c:2507
+#: ia64-gen.c:2506
#, fuzzy, c-format
msgid "opcode %s has no class (ops %d %d %d)\n"
msgstr "尚未定义名为“%s”的 <draw_ops>"
#. Invalid offset present.
#: ip2k-asm.c:106
msgid "offset(IP) is not a valid form"
-msgstr ""
+msgstr "偏移量(IP)不是合法格式"
#. Found something there in front of (DP) but it's out
#. of range.
msgid "expecting got relative address: gotofflo16(symbol)"
msgstr ""
-#: m10200-dis.c:158 m10300-dis.c:581
+#: m10200-dis.c:157 m10300-dis.c:580
#, c-format
msgid "unknown\t0x%04lx"
msgstr "未知\t0x%04lx"
-#: m10200-dis.c:328
+#: m10200-dis.c:327
#, c-format
msgid "unknown\t0x%02lx"
msgstr "未知\t0x%02lx"
msgid "Invalid size specifier"
msgstr "%s:无效的新列指定符号“%s”\n"
-#: m68k-dis.c:1281
+#: m68k-dis.c:1292
#, c-format
msgid "<function code %d>"
msgstr "<函数代码 %d>"
-#: m68k-dis.c:1440
+#: m68k-dis.c:1455
#, c-format
msgid "<internal error in opcode table: %s %s>\n"
msgstr "<操作数表中出现内部错误:%s %s>\n"
-#: m88k-dis.c:679
+#: m88k-dis.c:678
#, c-format
msgid "# <dis error: %08lx>"
msgstr "# <反汇编出错: %08lx>"
msgid "Value is not aligned enough"
msgstr "数值对齐程度不够"
-#: mips-dis.c:1392 mips-dis.c:1580
+#: mips-dis.c:1751 mips-dis.c:1977
#, fuzzy, c-format
#| msgid "# internal error, undefined modifier(%c)"
msgid "# internal error, undefined operand in `%s %s'"
msgstr "<操作数表中出现内部错误:%s %s>\n"
-#: mips-dis.c:2190
+#: mips-dis.c:2553
#, c-format
msgid ""
"\n"
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
-#: mips-dis.c:2194
-#, c-format
+#: mips-dis.c:2557
+#, fuzzy, c-format
+#| msgid ""
+#| "\n"
+#| " aliases Do print instruction aliases.\n"
+msgid ""
+"\n"
+" no-aliases Use canonical instruction forms.\n"
+msgstr ""
+"\n"
+" aliases 要打印指令别名。\n"
+
+#: mips-dis.c:2560
+#, fuzzy, c-format
+#| msgid ""
+#| "\n"
+#| " msa Recognize MSA instructions.\n"
msgid ""
"\n"
-" msa Recognize MSA instructions.\n"
+" msa Recognize MSA instructions.\n"
msgstr ""
"\n"
" msa 识别 MSA 指令。\n"
-#: mips-dis.c:2197
-#, c-format
+#: mips-dis.c:2563
+#, fuzzy, c-format
+#| msgid ""
+#| "\n"
+#| " virt Recognize the virtualization ASE instructions.\n"
msgid ""
"\n"
-" virt Recognize the virtualization ASE instructions.\n"
+" virt Recognize the virtualization ASE instructions.\n"
msgstr ""
"\n"
" virt 识别虚拟化 ASE 指令。\n"
-#: mips-dis.c:2200
+#: mips-dis.c:2566
#, c-format
msgid ""
"\n"
-" gpr-names=ABI Print GPR names according to specified ABI.\n"
+" xpa Recognize the eXtended Physical Address (XPA)\n"
+" ASE instructions.\n"
+msgstr ""
+
+#: mips-dis.c:2570
+#, fuzzy, c-format
+#| msgid ""
+#| "\n"
+#| " gpr-names=ABI Print GPR names according to specified ABI.\n"
+#| " Default: based on binary being disassembled.\n"
+msgid ""
+"\n"
+" gpr-names=ABI Print GPR names according to specified ABI.\n"
" Default: based on binary being disassembled.\n"
msgstr ""
"\n"
" gpr-names=ABI 根据指定的 ABI 打印通用寄存器名。\n"
" 默认:根据被反汇编的二进制文件。\n"
-#: mips-dis.c:2204
+#: mips-dis.c:2574
#, c-format
msgid ""
"\n"
" fpr-names=ABI 根据指定的 ABI 打印浮点寄存器名。\n"
" 默认:数字。\n"
-#: mips-dis.c:2208
+#: mips-dis.c:2578
#, c-format
msgid ""
"\n"
" cp0-names=ARCH 根据指定的架构打印 CP0 寄存器名。\n"
" 默认:根据被反汇编的二进制代码。\n"
-#: mips-dis.c:2213
-#, c-format
+#: mips-dis.c:2583
+#, fuzzy, c-format
+#| msgid ""
+#| "\n"
+#| " hwr-names=ARCH Print HWR names according to specified \n"
+#| "\t\t\t architecture.\n"
+#| " Default: based on binary being disassembled.\n"
msgid ""
"\n"
" hwr-names=ARCH Print HWR names according to specified \n"
-"\t\t\t architecture.\n"
+" architecture.\n"
" Default: based on binary being disassembled.\n"
msgstr ""
"\n"
" hwr-names=ARCH 根据指定的架构打印 HWR 寄存器名。\n"
" 默认:根据被反汇编的二进制代码。\n"
-#: mips-dis.c:2218
+#: mips-dis.c:2588
#, c-format
msgid ""
"\n"
" reg-names=ABI 根据指定的 ABI 打印通用寄存器和浮点寄存\n"
" 器名。\n"
-#: mips-dis.c:2222
+#: mips-dis.c:2592
#, c-format
msgid ""
"\n"
"\n"
" reg-names=ARCH 根据指定的架构打印 CP0 和 HWR 寄存器名。\n"
-#: mips-dis.c:2226
+#: mips-dis.c:2596
#, c-format
msgid ""
"\n"
" 对于以上的选项,以下值可被用于 \"ABI\":\n"
" "
-#: mips-dis.c:2233
+#: mips-dis.c:2603
#, c-format
msgid ""
"\n"
msgid "*unknown operands type: %d*"
msgstr "%s:未知的重定位类型 %d"
-#: msp430-dis.c:412
+#: msp430-dis.c:59
+#, c-format
+msgid "Warning: disassembly unreliable - not enough bytes available"
+msgstr "警告:反汇编不可靠 - 没有足够的可用字节"
+
+#: msp430-dis.c:65
+#, c-format
+msgid "Error: read from memory failed"
+msgstr "错误:从内存读取失败"
+
+#: msp430-dis.c:499
#, fuzzy
-msgid "Illegal as emulation instr"
+msgid "Warning: illegal as emulation instr"
msgstr "不要使用 fabss 自定义指令"
#. R2/R3 are illegal as dest: may be data section.
-#: msp430-dis.c:487
+#: msp430-dis.c:591
#, fuzzy
-msgid "Illegal as 2-op instr"
+msgid "Warning: illegal as 2-op instr"
msgstr "不要使用 fabss 自定义指令"
-#: msp430-dis.c:839
+#: msp430-dis.c:1002
#, fuzzy
-msgid "unrecognised CALLA addressing mode"
+msgid "Warning: unrecognised CALLA addressing mode"
msgstr "无效寻址模式"
-#: msp430-dis.c:1110 msp430-dis.c:1127 msp430-dis.c:1148
+#: msp430-dis.c:1303 msp430-dis.c:1324 msp430-dis.c:1345
#, c-format
-msgid "Reserved use of A/L and B/W bits detected"
+msgid "Warning: reserved use of A/L and B/W bits detected"
msgstr ""
#: mt-asm.c:110 mt-asm.c:190
msgid "$<undefined>"
msgstr "$<未定义>"
-#: ppc-dis.c:320
+#: ppc-dis.c:359
#, fuzzy, c-format
msgid "warning: ignoring unknown -M%s option\n"
msgstr "警告:忽略--strip-program 选项,因为-s 选项没有指明"
-#: ppc-dis.c:745
+#: ppc-dis.c:880
#, c-format
msgid ""
"\n"
"\n"
"下列 PPC 特定的反汇编器选项在使用 -M 开关时可用(使用逗号分隔多个选项):\n"
-#: ppc-opc.c:887 ppc-opc.c:910 ppc-opc.c:935 ppc-opc.c:964
-#, fuzzy
-#| msgid "Bad register name"
+#: ppc-opc.c:52 ppc-opc.c:75 ppc-opc.c:100 ppc-opc.c:129
msgid "invalid register"
-msgstr "%q+D的寄存器名无效"
+msgstr "无效的寄存器"
-#: ppc-opc.c:1212 ppc-opc.c:1242
+#: ppc-opc.c:377 ppc-opc.c:405
msgid "invalid conditional option"
msgstr "无效的条件选项"
-#: ppc-opc.c:1214 ppc-opc.c:1244
+#: ppc-opc.c:379 ppc-opc.c:407
#, fuzzy
msgid "invalid counter access"
msgstr "没有访问权限"
-#: ppc-opc.c:1246
+#: ppc-opc.c:409
msgid "attempt to set y bit when using + or - modifier"
msgstr ""
-#: ppc-opc.c:1278
+#: ppc-opc.c:500
msgid "invalid mask field"
msgstr "无效的掩码字段"
-#: ppc-opc.c:1304
+#: ppc-opc.c:523
#, fuzzy
-msgid "ignoring invalid mfcr mask"
+msgid "invalid mfcr mask"
msgstr "无效的掩码字段"
-#: ppc-opc.c:1403 ppc-opc.c:1438
+#: ppc-opc.c:596 ppc-opc.c:636
+#, fuzzy
+msgid "illegal L operand value"
+msgstr "立即数"
+
+#: ppc-opc.c:642
+msgid "incompatible L operand value"
+msgstr ""
+
+#: ppc-opc.c:686 ppc-opc.c:721
msgid "illegal bitmask"
msgstr "非法的位掩码"
-#: ppc-opc.c:1525
+#: ppc-opc.c:808
#, fuzzy
msgid "address register in load range"
msgstr "地址中无寄存器"
-#: ppc-opc.c:1578
+#: ppc-opc.c:874
#, fuzzy
msgid "index register in load range"
msgstr "寄存器元素下标"
-#: ppc-opc.c:1594 ppc-opc.c:1650
+#: ppc-opc.c:903 ppc-opc.c:984
msgid "source and target register operands must be different"
msgstr ""
-#: ppc-opc.c:1609
+#: ppc-opc.c:931
msgid "invalid register operand when updating"
msgstr ""
-#: ppc-opc.c:1700
-#, fuzzy
+#: ppc-opc.c:1047
msgid "illegal immediate value"
-msgstr "立即数"
+msgstr "非法的立即数"
-#: ppc-opc.c:1839
+#: ppc-opc.c:1194
#, fuzzy
msgid "invalid sprg number"
msgstr "无效的数字。"
-#: ppc-opc.c:2009
+#: ppc-opc.c:1231
+#, fuzzy
+msgid "invalid tbr number"
+msgstr "无效的数字。"
+
+#: ppc-opc.c:1373
#, fuzzy
#| msgid "invalid conditional option"
msgid "invalid constant"
msgstr "%<#pragma pack%>中有无效常量 - 已忽略"
-#: s390-dis.c:291
-#, c-format
+#: ppc-opc.c:1478 ppc-opc.c:1505 ppc-opc.c:1532 ppc-opc.c:1559
+msgid "UIMM = 00000 is illegal"
+msgstr ""
+
+#: ppc-opc.c:1586
+msgid "UIMM values >7 are illegal"
+msgstr ""
+
+#: ppc-opc.c:1613
+msgid "UIMM values >15 are illegal"
+msgstr ""
+
+#: ppc-opc.c:1640
+msgid "GPR odd is illegal"
+msgstr ""
+
+#: ppc-opc.c:1667 ppc-opc.c:1694
+#, fuzzy
+#| msgid "invalid register offset"
+msgid "invalid offset"
+msgstr "无效的寄存器偏移量"
+
+#: ppc-opc.c:1721
+#, fuzzy
+msgid "invalid Ddd value"
+msgstr "无效的数字。"
+
+#. Invalid option.
+#: riscv-dis.c:68
+#, fuzzy, c-format
+#| msgid "Unrecognised disassembler option: %s\n"
+msgid "Unrecognized disassembler option: %s\n"
+msgstr "无法识别的反汇编器选项:%s\n"
+
+#: riscv-dis.c:346
+#, fuzzy, c-format
+#| msgid "# internal error, undefined modifier(%c)"
+msgid "# internal error, undefined modifier (%c)"
+msgstr "<操作数表中出现内部错误:%s %s>\n"
+
+#: riscv-dis.c:498
+#, fuzzy, c-format
+#| msgid ""
+#| "\n"
+#| "The following MIPS specific disassembler options are supported for use\n"
+#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
-"The following S/390 specific disassembler options are supported for use\n"
+"The following RISC-V-specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
+"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
+
+#: riscv-dis.c:502
+#, c-format
+msgid ""
"\n"
-"下列 S/390 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
+" numeric Print numeric register names, rather than ABI names.\n"
+msgstr ""
-#: s390-dis.c:295
+#: riscv-dis.c:505
#, c-format
-msgid " esa Disassemble in ESA architecture mode\n"
+msgid ""
+"\n"
+" no-aliases Disassemble only into canonical instructions, rather\n"
+" than into pseudoinstructions.\n"
+msgstr ""
+
+#: s390-dis.c:42
+#, fuzzy
+#| msgid " esa Disassemble in ESA architecture mode\n"
+msgid "Disassemble in ESA architecture mode"
msgstr " esa 在 ESA 架构模式下反汇编\n"
-#: s390-dis.c:296
-#, fuzzy, c-format
-msgid " zarch Disassemble in z/Architecture mode\n"
+#: s390-dis.c:43
+#, fuzzy
+msgid "Disassemble in z/Architecture mode"
msgstr "z/Architecture 模式在 %s 上不受支持"
-#: score-dis.c:662 score-dis.c:869 score-dis.c:1030 score-dis.c:1144
-#: score-dis.c:1151 score-dis.c:1158 score7-dis.c:694 score7-dis.c:857
+#: s390-dis.c:44
+msgid "Print unknown instructions according to length from first two bits"
+msgstr ""
+
+#: s390-dis.c:409
+#, c-format
+msgid ""
+"\n"
+"The following S/390 specific disassembler options are supported for use\n"
+"with the -M switch (multiple options should be separated by commas):\n"
+msgstr ""
+"\n"
+"\n"
+"下列 S/390 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
+
+#: score-dis.c:663 score-dis.c:870 score-dis.c:1031 score-dis.c:1145
+#: score-dis.c:1152 score-dis.c:1159 score7-dis.c:695 score7-dis.c:858
#, fuzzy
#| msgid "<illegal precision>"
msgid "<illegal instruction>"
msgstr "非法操作"
-#: sparc-dis.c:286
+#: sparc-dis.c:309
#, c-format
msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
msgstr "内部错误:错误的 sparc-opcode.h:“%s”,%#.8lx,%#.8lx\n"
-#: sparc-dis.c:297
+#: sparc-dis.c:320
#, c-format
msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
msgstr "内部错误:错误的 sparc-opcode.h:“%s”,%#.8lx,%#.8lx\n"
-#: sparc-dis.c:356
+#: sparc-dis.c:379
#, fuzzy, c-format
msgid "Internal error: bad sparc-opcode.h: \"%s\" == \"%s\"\n"
msgstr "内部错误:错误的 sparc-opcode.h:“%s”,%#.8lx,%#.8lx\n"
#. Mark as non-valid instruction.
-#: sparc-dis.c:1047
+#: sparc-dis.c:1100
msgid "unknown"
msgstr "未知"
msgid "invalid register name"
msgstr "无效寄存器名"
+#: wasm32-dis.c:88
+#, fuzzy
+#| msgid "invalid register name"
+msgid "Disassemble \"register\" names"
+msgstr "无效寄存器名"
+
+#: wasm32-dis.c:89
+msgid "Name well-known globals"
+msgstr ""
+
+#: wasm32-dis.c:503
+#, fuzzy, c-format
+#| msgid ""
+#| "\n"
+#| "The following ARM specific disassembler options are supported for use with\n"
+#| "the -M switch:\n"
+msgid ""
+"The following WebAssembly-specific disassembler options are supported for use\n"
+"with the -M switch:\n"
+msgstr ""
+"\n"
+"下列 ARM 特定的反汇编器选项可通过 -M 开关启用:\n"
+
#: xc16x-asm.c:66
msgid "Missing '#' prefix"
msgstr "缺失 '#' 前缀"
msgid "Syntax error: No trailing ')'"
msgstr "语法错误:没有结尾的‘)’"
+#, fuzzy
+#~ msgid "Illegal limm reference in last instruction!\n"
+#~ msgstr "在最后一条指令的非法住参考!"
+
+#, fuzzy
+#~ msgid "unable to fit different valued constants into instruction"
+#~ msgstr "无法融入教学的不同值的常数"
+
+#, fuzzy
+#~ msgid "auxiliary register not allowed here"
+#~ msgstr "在这里不允许使用%<#pragma%>"
+
+#, fuzzy
+#~ msgid "attempt to set readonly register"
+#~ msgstr "不能设置只读属性"
+
+#, fuzzy
+#~ msgid "attempt to read writeonly register"
+#~ msgstr "尝试读取 writeonly 登记册"
+
+#, fuzzy
+#~ msgid "too many long constants"
+#~ msgstr "实参太多"
+
+#, fuzzy
+#~ msgid "too many shimms in load"
+#~ msgstr "重复行过多"
+
+#, fuzzy
+#~ msgid "impossible store"
+#~ msgstr "STORE"
+
+#, fuzzy
+#~ msgid "st operand error"
+#~ msgstr ""
+#~ "\n"
+#~ "错误: ILL_ILLOPN (不合法的算符)"
+
+#, fuzzy
+#~ msgid "address writeback not allowed"
+#~ msgstr "意外的地址写回"
+
+#, fuzzy
+#~ msgid "invalid load/shimm insn"
+#~ msgstr "无效指令:"
+
+#, fuzzy
+#~ msgid "ld operand error"
+#~ msgstr ""
+#~ "\n"
+#~ "错误: ILL_ILLOPN (不合法的算符)"
+
+#, fuzzy
+#~ msgid "jump flags, but no .f seen"
+#~ msgstr " -f --as-flags <flags> 把 <flags> 传递给汇编程序。\n"
+
+#, fuzzy
+#~ msgid "jump flags, but no limm addr"
+#~ msgstr "跳的旗帜,但没有住地址"
+
+#, fuzzy
+#~ msgid "flag bits of jump address limm lost"
+#~ msgstr "标志位的跳转地址住失去了"
+
+#, fuzzy
+#~ msgid "attempt to set HR bits"
+#~ msgstr "<无法识别的标志位集合>"
+
+#, fuzzy
+#~ msgid "bad jump flags value"
+#~ msgstr "错误的ai_flags 值"
+
+#, fuzzy
+#~ msgid "branch address not on 4 byte boundary"
+#~ msgstr "将函数强行对齐到 4 字节边界上"
+
+#, fuzzy
+#~ msgid "must specify .jd or no nullify suffix"
+#~ msgstr "必须指定.jd 或无 nullify 后缀"
+
#~ msgid "unknown\t0x%04x"
#~ msgstr "未知\t0x%04x"