For more information about LTTng, refer to the project [http://lttng.org site]
-'''Note''': This User Guide covers the integration of the latest LTTng (v2.0) in Eclipse. The legacy version (v0.x) of both the tracer and the LTTng integration are no longer being maintained but are still available for download. The User Guide for the legacy LTTng integration is available [http://wiki.eclipse.org/index.php/Linux_Tools_Project/LTTng/User_Guide here].
+'''Note''': This User Guide covers the integration of the latest LTTng (v2.0) in Eclipse. The legacy version (v0.x) of both the tracer and the LTTng integration are no longer being maintained.
== About Tracing ==
* Support for arbitrarily large traces (larger than available memory)
* Support for correlating multiple time-ordered traces
* Support for zooming down to the nanosecond on any part of a trace or set of traces
-* Views synchronization of currently selected event
+* Views synchronization of currently selected time or time range, and window time range
* Efficient searching and filtering of events
* Support for trace bookmarks
* '''CTF''' - A CTF parser that can also be used as a standalone component
** ''Feature'': org.eclipse.linuxtools.ctf
** ''Plug-ins'': org.eclipse.linuxtools.ctf.core, org.eclipse.linuxtools.ctf.parser
-
+
* '''TMF''' - ''Tracing and Monitoring Framework'' a framework for generic trace processing
** ''Feature'': org.eclipse.linuxtools.tmf
** ''Plug-ins'': org.eclipse.linuxtools.tmf.core, org.eclipse.linuxtools.tmf.ui
== Tracing Perspective ==
-The '''Tracing''' perspective is part of the '''Tracing and Monitoring Framework (TMF)''' and groups the following views:
+The '''Tracing''' perspective is part of the '''Tracing and Monitoring Framework (TMF)''' and groups the following views:
* [[#Project_View | Project View]]
* [[#Events_Editor | Events Editor]]
[[Image:images/ShowTracingPerspective.png]]
-On top to these views, the '''Tracing and Monitoring Framework (TMF)''' feature provides a set of generic tracing specific views, such as:
+In addition to these views, the '''Tracing and Monitoring Framework (TMF)''' feature provides a set of generic tracing specific views, such as:
* [[#Colors_View | Colors View]]
* [[#Filters_View | Filters View]]
* [[#Time_Chart_View | Time Chart View]]
* [[#Environment_Variables_View | Environment Variables View]]
-* [[#Custom Parser | Custom Parser]]
+* [[#State_System_Explorer_View | State System Explorer View]]
+* [[#Call_Stack_View | Call Stack View]]
+
+The framework also supports user creation of [[#Custom_Parsers | Custom Parsers]].
-To open one of the above '''Tracing''' view, use the Eclipse Show View dialog ('''Window > Show View > Other...'''. Then select the relevant view from the '''Tracing'''.
+To open one of the above '''Tracing''' views, use the Eclipse Show View dialog ('''Window > Show View > Other...'''). Then select the relevant view from the '''Tracing''' category.
[[Image:images/ShowTracingViews.png]]
-Additionally, the '''LTTng''' feature provides a '''LTTng Tracer Control'''. It comes with a dedicated '''Control View'''.
+Additionally, the '''LTTng''' feature provides an '''LTTng Tracer Control''' functionality. It comes with a dedicated '''Control View'''.
* [[#LTTng_Tracer_Control | LTTng Tracer Control]]
== Project View ==
-The project view is the standard Eclipse Project Explorer. '''Tracing''' projects are well integrated in the Eclipse's Common Navigator Framework. The Project Explorer shows '''Tracing''' project with a small "T" decorator in the upper right of the project folder icon.
+
+The project view is the standard Eclipse Project Explorer. '''Tracing''' projects are well integrated in the Eclipse's Common Navigator Framework. The Project Explorer shows '''Tracing''' project with a small "T" decorator in the upper right of the project folder icon.
=== Creating a Tracing Project ===
+
A new '''Tracing''' project can be created using the New Tracing Project wizard. To create a new '''Tracing''' select '''File > New > Project...''' from the main menu bar or alternatively form the context-sensitive menu (click with right mouse button in the '''Project Explorer'''.
-The first page of project wizard will open.
+The first page of project wizard will open.
[[Image:images/NewTracingProjectPage1.png]]
[[Image:images/NewTracingProjectPage2.png]]
-A new project will appear in the '''Project Explorer''' view.
+A new project will appear in the '''Project Explorer''' view.
[[Image:images/NewProjectExplorer.png]]
-Tracing projects have two sub-folders: '''Traces''' which holds the individual traces, and '''Experiments''' which holds sets of traces that we want to correlate.
+Tracing projects have two sub-folders: '''Traces''' which holds the individual traces, and '''Experiments''' which holds sets of traces that we want to correlate.
=== Importing Traces in a Project ===
+==== Batch Importing ====
+The '''Batch Import Trace Wizard''' allows users to search their media for traces and import multiple traces of varying trace types simultaneously. It also handles name clashes and renaming of traces.
+
+The '''Traces''' folder holds the set of traces available for a tracing project. To import a set of traces to the '''Traces''' folder, one can open the '''Import...''' menu from the '''File''' main menu.
+
+[[Image:images/importImages/importImportMenu.png]]
+
+Then select '''Batch Trace Import'''
+
+[[Image:images/importImages/importMenuSelect.png]]
+
+Or one can select the '''Traces''' folder by double clicking on the project name.
+
+[[Image:images/importImages/importSelectTracingProject.png]]
+
+Then click the right mouse button on the '''Traces''' folder. Then select '''Batch Import...''' menu item in the context-sensitive menu.
+
+[[Image:images/importImages/importBatchImport.png]]
+
+At this point, the '''Batch import wizard''' is opened.
+
+The '''Available trace types''' page is visible. Select a trace type to scan for by clicking an item in trace types tree. If one selects a parent element, the new state will be propagated to the children.
+
+[[Image:images/importImages/importSelectTraceTypeToImport.png]]
+
+When that is done, the warning message will go away and the user can click '''Next >'''.
+
+[[Image:images/importImages/importSelectTraceTypeComplete.png]]
+
+Then select one or more files or directories to scan for traces. The directories added will be recursively scanned, all children files and directories will be scanned. This can be slow depending on the size of the directory to scan.
+
+[[Image:images/importImages/importSelectFilesToScan.png]]
+
+One can add a directory by clicking on '''Add Directory...''' then selecting a directory to import.
+
+[[Image:images/importImages/importSelectedDirectory.png]]
+
+One can also add a file by clicking on '''Add File...''' then selecting a file to import.
+
+[[Image:images/importImages/importAddFile.png]]
+
+Once the files and directories are selected, a background scanner will already start scanning them for potential matches. to select the candidates, click '''Next >'''.
+
+Here the user will see the results of the scan. The list will grow as more files are scanned.
+To select a trace to import, first open a trace type.
+
+[[Image:images/importImages/importScan1.png]]
+
+Then select the trace to import.
+
+[[Image:images/importImages/importScan2.png]]
+
+When that is done, typically one can press '''Finish''', and the trace will be imported. They can set the trace to be '''linked''' or '''copied'''. A '''linked''' trace is not copied to the user's workspace, rather, the original file is used. This is useful for traces that are very large and that the user does not want to copy several times. '''Copied''' traces are as their name indicates, copied to the local workspace. This is useful if there is a trace on a network or on some removable media. The user can also specify if the trace should '''overwrite''' the resources in the workspace or not.
+
+[[Image:images/importImages/importScan3.png]]
+
+One can select several traces also and import them simultaneously. In this case there is a problem, the name of both traces are the same, this is a conflicting name and needs to be resolved.
+
+[[Image:images/importImages/importScan4.png]]
+
+To do so, select one of the conflicting traces, then '''click on its name'''. Then type in a new name.
+
+[[Image:images/importImages/importScan5.png]]
+
+Here the traces shall be copied instead of linked.
+
+[[Image:images/importImages/importScan6.png]]
+
+At this point, press '''Finish''' to import the traces.
+
+If the '''Finish''' button is grayed, or if the user wishes to import to a different project, they need to press '''Next >'''. The user then needs to select a project to import to on the '''options''' page.
+
+[[Image:images/importImages/importOptions.png]]
+
+You will then see the traces in the '''Traces''' folder as shown below and can '''open''' them by '''double-clicking''' on them. For more details on how to open a trace see section [[#Opening_a_Trace_or_Experiment|Opening a Trace or Experiment]].
-The '''Traces''' folder holds the set of traces available for experiments. To import a trace to the traces folder, select the Traces folder and click the right mouse button. Then select '''Import...''' menu item in the context-sensitive menu.
+[[Image:images/importImages/importFinish.png]]
+
+==== Importing ====
+
+The previous way of importing a trace is still available. To access it, simply select '''Import...''' menu item in the context-sensitive menu.
[[Image:images/ProjectImportTraceAction.png]]
[[Image:images/ProjectImportTraceDialog.png]]
-Upon successful importing the traces will be stored in the '''Traces''' folder. If a trace type was selected in the import dialog, then the corresponding icon will be displayed. Linked traces will have a little arrow as decorator on the right bottom corner.
+Upon successful importing the traces will be stored in the '''Traces''' folder. If a trace type was selected in the import dialog, then the corresponding icon will be displayed. If no trace type is selected the unknown icon [[Image:images/unknown_parser.gif]] will be displayed. Linked traces will have a little arrow as decorator on the right bottom corner.
-Note that trace type is an extension point of the '''Tracing and Monitoring Framework (TMF)'''. Depending on the which features are loaded, the list of trace types can vary.
+Note that trace type is an extension point of the '''Tracing and Monitoring Framework (TMF)'''. Depending on the which features are loaded, the list of trace types can vary.
=== Selecting a Trace Type ===
=== Creating a Experiment ===
-An experiment consists in an arbitrary number of aggregated traces for purpose of correlation. In the degenerate case, an experiment can consist of a single trace. The experiment provides a unified, time-ordered stream of the individual trace events.
+An experiment consists in an arbitrary number of aggregated traces for purpose of correlation. In the degenerate case, an experiment can consist of a single trace. The experiment provides a unified, time-ordered stream of the individual trace events.
-To create an experiment, select the folder '''Experiments''' and click the right mouse button. Then select '''New...'''.
+To create an experiment, select the folder '''Experiments''' and click the right mouse button. Then select '''New...'''.
[[Image:images/NewExperimentAction.png]]
-A new display will open for entering the experiment name. Type the name of the experiment in the text field '''Experiment Name''' and the click on '''OK'''.
+A new display will open for entering the experiment name. Type the name of the experiment in the text field '''Experiment Name''' and the click on '''OK'''.
[[Image:images/NewExperimentDialog.png]]
=== Selecting Traces for an Experiment ===
-After creating an experiment, traces need to be added to the experiment. To select traces for an experiment select the newly create experiment and click the right mouse button. Select '''Select Traces...''' from the context sensitive menu.
+After creating an experiment, traces need to be added to the experiment. To select traces for an experiment select the newly create experiment and click the right mouse button. Select '''Select Traces...''' from the context sensitive menu.
[[Image:images/SelectTracesAction.png]]
-A new dialog box will open with a list of available traces. Select the traces to add from the list and then click on '''Finish'''.
+A new dialog box will open with a list of available traces. Select the traces to add from the list and then click on '''Finish'''.
[[Image:images/SelectTracesDialog.png]]
=== Removing Traces from an Experiment ===
-To remove one or more traces for an experiment select the trace(s) to remove under the Experiment folder and click the right mouse button. Select '''Remove''' from the context sensitive menu.
+To remove one or more traces for an experiment select the trace(s) to remove under the Experiment folder and click the right mouse button. Select '''Remove''' from the context sensitive menu.
[[Image:images/RemoveTracesAction.png]]
=== Renaming a Trace or Experiment ===
-Traces and Experiment can be renamed from the '''Project Explorer''' view. To rename a trace or experiment select the relevant trace and click the right mouse button. Then select '''Rename...''' from the context sensitive menu. The trace or experiment needs to be closed in order to do this operation.
+Traces and Experiment can be renamed from the '''Project Explorer''' view. To rename a trace or experiment select the relevant trace and click the right mouse button. Then select '''Rename...''' from the context sensitive menu. The trace or experiment needs to be closed in order to do this operation.
[[Image:images/RenameTraceAction.png]]
-
-A new dialog box will show for entering a new name. Enter a new trace or experiment name respectively in the relevant text field and click on '''OK'''. If the new name already exists the dialog box will show an error and a different name has to be entered.
-[[Image:images/RenameTraceDialog.png]]
+A new dialog box will show for entering a new name. Enter a new trace or experiment name respectively in the relevant text field and click on '''OK'''. If the new name already exists the dialog box will show an error and a different name has to be entered.
+
+[[Image:images/RenameTraceDialog.png]]
-[[Image:images/RenameExperimentDialog.png]]
+[[Image:images/RenameExperimentDialog.png]]
-After successful renaming the new name will show in the '''Project Explorer'''. In case of a trace all reference links to that trace will be updated too. Note that linked traces only changes the display name, the underlying trace resource will stay the original name.
+After successful renaming the new name will show in the '''Project Explorer'''. In case of a trace all reference links to that trace will be updated too. Note that linked traces only changes the display name, the underlying trace resource will stay the original name.
Note that all supplementary files will be also handled accordingly (see also [[#Deleting Supplementary Files | Deleting Supplementary Files]]).
=== Copying a Trace or Experiment ===
-To copy a trace or experiment select the relevant trace or experiment in the '''Project Explorer''' view and click the right mouse button. Then select '''Copy...''' from the context sensitive menu.
+To copy a trace or experiment select the relevant trace or experiment in the '''Project Explorer''' view and click the right mouse button. Then select '''Copy...''' from the context sensitive menu.
[[Image:images/CopyTraceAction.png]]
-
-A new dialog box will show for entering a new name. Enter a new trace or experiment name respectively in the relevant text field and click on '''OK'''. If the new name already exists the dialog box will show an error and a different name has to be entered.
-[[Image:images/CopyTraceDialog.png]]
+A new dialog box will show for entering a new name. Enter a new trace or experiment name respectively in the relevant text field and click on '''OK'''. If the new name already exists the dialog box will show an error and a different name has to be entered.
-[[Image:images/CopyExperimentDialog.png]]
+[[Image:images/CopyTraceDialog.png]]
-After successful copy operation the new trace or experiment respectively will show in the '''Project Explorer'''. In case of a linked trace, the copied trace will be a link to the original trace too.
+[[Image:images/CopyExperimentDialog.png]]
+
+After successful copy operation the new trace or experiment respectively will show in the '''Project Explorer'''. In case of a linked trace, the copied trace will be a link to the original trace too.
Note that the directory for all supplementary files will be copied, too. (see also [[#Deleting Supplementary Files | Deleting Supplementary Files]]).
=== Deleting a Trace or Experiment ===
-To delete a trace or experiment select the relevant trace or experiment in the '''Project Explorer''' view and click the right mouse button. Then select '''Delete...''' from the context sensitive menu. The trace or experiment needs to be closed in order to do this operation.
+To delete a trace or experiment select the relevant trace or experiment in the '''Project Explorer''' view and click the right mouse button. Then select '''Delete...''' from the context sensitive menu. The trace or experiment needs to be closed in order to do this operation.
[[Image:images/DeleteExperimentAction.png]]
-
+
A confirmation dialog box will open. To perform the deletion press '''OK''' otherwise select '''Cancel'''.
[[Image:images/DeleteExperimentConfirmationDialog.png]]
-After successful operation the selected trace or experiment will be removed from the project. In case of a linked trace only the link will be removed. The actual trace resource remain on the disk.
+After successful operation the selected trace or experiment will be removed from the project. In case of a linked trace only the link will be removed. The actual trace resource remain on the disk.
Note that the directory for all supplementary files will be deleted, too. (see also [[#Deleting Supplementary Files | Deleting Supplementary Files]]).
[[Image:images/DeleteSupplementaryFilesAction.png]]
-A new dialog box will open with a list of supplementary files. Select the file(s) to delete from the list and press '''OK'''.
+A new dialog box will open with a list of supplementary files. Select the file(s) to delete from the list and press '''OK'''.
[[Image:images/DeleteSupplementaryFilesDialog.png]]
To delete all supplementary files from all traces of a experiment, select the relevant experiment in the '''Project Explorer''' view and click the right mouse button. In the context-sensitive menu select '''Delete Supplementary Files...''' menu item. The experiment and included traces need to be closed in order to do this operation.
-A new dialog box will open with a list of supplementary files. Note that the supplementary files are prefixed with the trace name to indicate the trace they belong to. Select the file(s) to delete from the list and press '''OK'''.
+A new dialog box will open with a list of supplementary files. Note that the supplementary files are prefixed with the trace name to indicate the trace they belong to. Select the file(s) to delete from the list and press '''OK'''.
[[Image:images/DeleteExpSupplementaryFilesDialog.png]]
Any resource can be dragged and dropped from a non-tracing project, and any file or folder can be dragged from an external tool, into a tracing project's trace folder. The resource will be copied or imported as a new trace, however the trace type will be unknown and need to be set manually by the user.
+To import the trace as a link, use the platform-specific key modifier while dragging the source trace. A link will be created in the target project to the trace's location on the file system.
+
It is also possible to drop a trace, resource, file or folder into an existing experiment. If the item does not already exist as a trace in the project's trace folder, it will first be copied or imported, then the trace will be added to the experiment.
+=== Link with Editor ===
+
+The tracing projects support the feature '''Link With Editor''' of the Project Explorer view. With this feature it is now possible to<br/>
+* select a trace element in the Project Explorer view and the corresponding [[#Events_Editor | Events Editor]] will get focus if the relevant trace is open.
+* select an [[#Events_Editor | Events Editor]] and the corresponding trace element will be highlighted in the Project Explorer view.
+
+To enable or disable this feature toggle the '''Link With Editor''' button of the Project Explorer view as shown below.
+
+[[Image:images/TMF_LinkWithEditor.png]]
+
== Events Editor ==
The Events editor shows the basic trace data elements (events) in a tabular format. The editors can be dragged in the editor area so that several traces may be shown side by side. These traces are synchronized by timestamp.
[[Image:images/LTTng2EventsEditor.png]]
-The header displays the current trace (or experiment) name.
+The header displays the current trace (or experiment) name.
-Being part of the '''Tracing and Monitoring''' Framework, the default table displays the following fields:
+Being part of the '''Tracing and Monitoring''' Framework, the default table displays the following fields:
* '''Timestamp''': the event timestamp
* '''Source''': the source of the event
* '''Type''': the event type and localization
* '''Reference''' the event reference
-* '''Content''': the raw event content
+* '''Content''': the raw event content
The first row of the table is the header row a.k.a. the Search and Filter row.
The highlighted event is the ''current event'' and is synchronized with the other views. If you select another event, the other views will be updated accordingly. The properties view will display a more detailed view of the selected event.
+An event range can be selected by holding the '''Shift''' key while clicking another event or using any of the cursor keys ('''Up'''', '''Down''', '''PageUp''', '''PageDown''', '''Home''', '''End'''). The first and last events in the selection will be used to determine the current selected time range for synchronization with the other views.
+
[[Image:images/LTTng2EventProperties.png]]
The Events editor can be closed, disposing a trace. When this is done, all the views displaying the information will be updated with the trace data of the next event editor tab. If all the editor tabs are closed, then the views will display their empty states.
[[Image:images/Bookmarks.png]]
+=== Event Source Lookup ===
+
+For CTF traces using specification v1.8.2 or above, information can optionally be embedded in the trace to indicate the source of a trace event. This is accessed through the event context menu by right-clicking on an event in the table.
+
+==== Source Code ====
+
+If a source file is available in the trace for the selected event, the item '''Open Source Code''' is shown in the context menu. Selecting this menu item will attempt to find the source file in all opened projects in the workspace. If multiple candidates exist, a selection dialog will be shown to the user. The selected source file will be opened, at the correct line, in its default language editor. If no candidate is found, an error dialog is shown displaying the source code information.
+
+==== EMF Model ====
+
+If an EMF model URI is available in the trace for the selected event, the item '''Open Model Element''' is shown in the context menu. Selecting this menu item will attempt to open the model file in the project specified in the URI. The model file will be opened in its default model editor. If the model file is not found, an error dialog is shown displaying the URI information.
+
== Histogram View ==
The Histogram View displays the trace events distribution with respect to time. When streaming a trace, this view is dynamically updated as the events are received.
On the top left, there are two data controls:
-* '''Current Event (sec)''': Displays the timestamp of the currently selected event
+* '''Current Event (sec)''': Displays the current time or selected time range begin time
* '''Window Span (sec)''': Displays the current time range window size
Both control can be used to modify their respective value. After validation, the other controls and views will be synchronized and updated accordingly.
-
The large histogram, at the bottom, shows the event distribution over the whole trace or set of traces. It also has a smaller semi-transparent window, with a cross-hair, that shows the currently selected time range window. The time range window can be zoomed in/out by using the mouse wheel. It can also be selected by the mouse and dragged to another region of the trace.
The smaller histogram, on top right, corresponds to the currently selected time range window, a sub-range of the event set. Its size can also be zoomed in/out using the mouse wheel.
The x-axis of each histogram corresponds to the events timestamps. The timestamp of the first and the last event of the respective ranges is displayed. The y-axis of each histogram shows the minimum/maximum number of events in the corresponding histogram bars.
-The dashed vertical magenta bar, on the right, shows the position of the last event. The dashed vertical red bar shows the relative position of the currently selected event. The current event can be changed by clicking on the histogram.
+The dashed vertical magenta bar, on the right, shows the position of the last event. The vertical blue bar shows the currently selected time. The current time can be changed by clicking on the histogram. Shift-clicking the histogram will select a time range, in which case there will be vertical blue bars at the begin and end time and the region in between will be shaded.
Hovering the mouse over an histogram bar pops up an information window that displays the start/end time of the corresponding bar as well as the number of events it represents.
* '''Left''': Moves the current event to the previous non-empty bar
* '''Right''': Moves the current event to the next non-empty bar
-* '''Home''': Displays the current event to the first histogram bar
-* '''End''': Displays the current event to the last non-empty histogram bar
+* '''Home''': Sets the current time to the first histogram bar
+* '''End''': Sets the current time to the last non-empty histogram bar
== Statistics View ==
The filters can be more complex than what can be achieved with the filter header row in the events table. The filter is defined in a tree node structure, where the node types can be any of '''EVENTTYPE''', '''AND''', '''OR''', '''CONTAINS''', '''EQUALS''', '''MATCHES''' or '''COMPARE'''. Some nodes types have restrictions on their possible children in the tree.
-The '''EVENTTYPE''' node filters against the event type of the trace as defined in a plugin extension or in a custom parsers. When used, any child node will have its field combo box restricted to the possible fields of that event type.
+The '''EVENTTYPE''' node filters against the event type of the trace as defined in a plug-in extension or in a custom parsers. When used, any child node will have its field combo box restricted to the possible fields of that event type.
The '''AND''' node applies the logical ''and'' condition on all of its children. All children conditions must be true for the filter to match. A ''not'' operator can be applied to invert the condition.
When a filter is applied in the events table, the non-matching ticks are removed from the Time Chart view.
-The Time Chart only supports traces that are opened in an editor. The use of an editor is specified in the plugin extension for that trace type, or is enabled by default for custom traces.
+The Time Chart only supports traces that are opened in an editor. The use of an editor is specified in the plug-in extension for that trace type, or is enabled by default for custom traces.
== Environment Variables View ==
A new feature of CTF traces is their ability to store user defined data that is not to be placed in an event. It is generally data that is per-trace specific, such as the tracer version and the trace domain. It will be populated when a trace is loaded if the trace has environment variables. <br>
[[Image:images/LTTng2EnvironmentsView.png]]<br>
-The above picture shows a trace loaded that was collevcted with the '''lttng-modules''' version '''2'''.'''0'''.'''0''' tracer. It is a '''kernel''' trace of the '''3.2.0-18-generic''' '''linux''' kernel.
+The above picture shows a trace loaded that was collected with the '''lttng-modules''' version '''2'''.'''0'''.'''0''' tracer. It is a '''kernel''' trace of the '''3.2.0-18-generic''' '''linux''' kernel.
+
+== State System Explorer View ==
+
+The State System Explorer view allows the user to inspect the state interval values of every attribute of a state system at a particular time.
-== Custom Parser ==
+The view shows a tree of currently selected traces and their registered state system IDs. For each state system the tree structure of attributes is displayed. The attribute name, quark, value, start and end time, and full attribute path are shown for each attribute.
+
+To modify the time of attributes shown in the view, select a different current time in other views that support time synchronization (e.g. event table, histogram view). When a time range is selected, this view uses the begin time.
+
+== Call Stack View ==
+
+The Call Stack view allows the user to visualize the call stack per thread over time, if the application and trace provide this information.
+
+The view shows the call stack information for the currently selected trace.
+
+The table on the left-hand side of the view shows the threads and call stack. The function name, depth, entry and exit time and duration are shown for the call stack at the selected time.
+
+Double-clicking on a function entry in the table will zoom the time graph to the selected function's range of execution.
+
+The time graph on the right-hand side of the view shows the call stack state graphically over time. The function name is visible on each call stack event if size permits. The color of each call stack event is randomly assigned based on the function name, allowing for easy identification of repeated calls to the same function.
+
+Clicking on the time graph will set the current time and consequently update the table with the current call stack information.
+
+Shift-clicking on the time graph will select a time range. When the selection is a time range, the begin time is used to update the stack information.
+
+Double-clicking on a call stack event will zoom the time graph to the selected function's range of execution.
+
+Clicking the '''Select Next Event''' or '''Select Previous Event''' or using the left and right arrows will navigate to the next or previous call stack event, and select the function currently at the top of the call stack.
+
+== Custom Parsers ==
Custom parser wizards allow the user to define their own parsers for text or XML traces. The user defines how the input should be parsed into internal trace events and identifies the event fields that should be created and displayed. Traces created using a custom parser can be correlated with other built-in traces or traces added by plug-in extension.
=== Creating a custom text parser ===
-
+
The '''New Custom Text Parser''' wizard can be used to create a custom parser for text logs. It can be launched several ways:
-
+
* Select '''File''' > '''New''' > '''Other...''' > '''Tracing''' > '''Custom Text Parser'''
-* Open the '''Manage Custom Parsers''' dialog from the '''Project Explorer''' view menu, select the '''Text''' radio button and click the '''New...''' button
+* Open the '''[[#Managing_custom_parsers | Manage Custom Parsers]]''' dialog, select the '''Text''' radio button and click the '''New...''' button
[[Image:images/CustomTextParserInput.png]]
* '''Log type:''' Enter a name for the custom log entries, which is also the name of the custom parser.
* '''Time Stamp format:''' Enter the date and time pattern that will be used to output the Time Stamp.<br>
Note: information about date and time patterns can be found here: [http://java.sun.com/javase/6/docs/api/java/text/SimpleDateFormat.html]
-
+
Click the '''Add next line''', '''Add child line''' or '''Remove line''' buttons to create a new line of input or delete it. For each line of input, enter the following information:
* '''Regular expression:''' Enter a regular expression that should match the input line in the log, using capturing groups to extract the data.<br>
* '''Cardinality:''' Enter the minimum and maximum number of lines matching this line's regular expression that must be found in the log. At least the minimum number of lines must be found before the parser will consider the next line. Child lines will always be considered first.
<u>Important note:</u> The custom parsers identify a log entry when the first line's regular expression matches (Root Line n). Each subsequent text line in the log is attempted to be matched against the regular expression of the parser's input lines in the order that they are defined (Line n.*). Only the first matching input line will be used to process the captured data to be stored in the log entry. When a text line matches a Root Line's regular expression, a new log entry is started.
-
+
Click the '''Add group''' or '''Remove group''' buttons to define the data extracted from the capturing groups in the line's regular expression. For each group, enter the following information:
* '''Name combo:''' Select a name for the extracted data:
-** '''Time Stamp''': Select this option to identify the time stamp data. The input's data and time pattern must be entered in the format: text box.
+** '''Time Stamp''': Select this option to identify the time stamp data. The input's data and time pattern must be entered in the format: text box.
** '''Message''': Select this option to identify the main log entry's message. This is usually a group which could have text of greater length.
-** '''Other''': Select this option to identify any non-standard data. The name must be entered in the name: text box.
-
+** '''Other''': Select this option to identify any non-standard data. The name must be entered in the name: text box.
+
* '''Action combo:''' Select the action to be performed on the extracted data:
-** '''Set''': Select this option to overwrite the data for the chosen name when there is a match for this group.
-** '''Append''': Select this option to append to the data with the chosen name, if any, when there is a match for this group.
+** '''Set''': Select this option to overwrite the data for the chosen name when there is a match for this group.
+** '''Append''': Select this option to append to the data with the chosen name, if any, when there is a match for this group.
** '''Append with |''' : Select this option to append to the data with the chosen name, if any, when there is a match for this group, using a | separator between matches.
-
+
The '''Preview input''' text box can be used to enter any log data that will be processed against the defined custom parser. When the wizard is invoked from a selected log file resource, this input will be automatically filled with the file contents.
-
+
The '''Preview:''' text field of each capturing group and of the Time Stamp will be filled from the parsed data of the first matching log entry.
-
+
In the '''Preview input''' text box, the matching entries are highlighted with different colors:
* <code><span style="background:#FFFF00"> Yellow </span></code> : indicates uncaptured text in a matching line.
* <code> White </code> : indicates a non-matching line.
The first line of a matching entry is highlighted with darker colors.
-
+
By default only the first matching entry will be highlighted. To highlight all matching entries in the preview input data, click the '''Highlight All''' button. This might take a few seconds to process, depending on the input size.
-
-Click the '''Next''' button to go to the second page of the wizard.
-
+
+Click the '''Next >''' button to go to the second page of the wizard.
+
[[Image:images/CustomTextParserOutput.png]]
On this page, the list of default and custom data is shown, along with a preview of the custom parser log table output.
* '''Column order:''' Click '''Move before''' or '''Move after''' to change the display order of custom data.
The table at the bottom of the page shows a preview of the custom parser log table output according to the selected options, using the matching entries of the previous page's '''Preview input''' log data.
-
+
Click the '''Finish''' button to close the wizard and save the custom parser.
=== Creating a custom XML parser ===
The '''New Custom XML Parser''' wizard can be used to create a custom parser for XML logs. It can be launched several ways:
* Select '''File''' > '''New''' > '''Other...''' > '''Tracing''' > '''Custom XML Parser'''
-* Open the '''Manage Custom Parsers''' dialog from the '''Project Explorer''' view menu, select the '''XML''' radio button and click the '''New...''' button
+* Open the '''[[#Managing_custom_parsers | Manage Custom Parsers]]''' dialog, select the '''XML''' radio button and click the '''New...''' button
[[Image:images/CustomXMLParserInput.png]]
* '''Element name:''' Enter a name for the element that must match an element of the XML file.
* '''Log entry:''' Select this checkbox to identify an element which represents a log entry. Each element with this name in the XML file will be parsed to a new log entry. At least one log entry element must be identified in the XML document. Log entry elements cannot be nested.
* '''Name combo:''' Select a name for the extracted data:
-** '''Ignore''': Select this option to ignore the extracted element's data at this level. It is still possible to extract data from this element's child elements.
+** '''Ignore''': Select this option to ignore the extracted element's data at this level. It is still possible to extract data from this element's child elements.
** '''Time Stamp''': Select this option to identify the time stamp data. The input's data and time pattern must be entered in the format: text box.
-** '''Message''': Select this option to identify the main log entry's message. This is usually an input which could have text of greater length.
-** '''Other''': Select this option to identify any non-standard data. The name must be entered in the name: text box. It does not have to match the element name.
+** '''Message''': Select this option to identify the main log entry's message. This is usually an input which could have text of greater length.
+** '''Other''': Select this option to identify any non-standard data. The name must be entered in the name: text box. It does not have to match the element name.
* '''Action combo:''' Select the action to be performed on the extracted data:
-** '''Set''': Select this option to overwrite the data for the chosen name when there is a match for this element.
-** '''Append''': Select this option to append to the data with the chosen name, if any, when there is a match for this element.
-** '''Append with |''' : Select this option to append to the data with the chosen name, if any, when there is a match for this element, using a | separator between matches.
+** '''Set''': Select this option to overwrite the data for the chosen name when there is a match for this element.
+** '''Append''': Select this option to append to the data with the chosen name, if any, when there is a match for this element.
+** '''Append with |''' : Select this option to append to the data with the chosen name, if any, when there is a match for this element, using a | separator between matches.
Note: An element's extracted data 'value' is a parsed string representation of all its attributes, children elements and their own values. To extract more specific information from an element, ignore its data value and extract the data from one or many of its attributes and children elements.
* '''Attribute name:''' Enter a name for the attribute that must match an attribute of this element in the XML file.
* '''Name combo:''' Select a name for the extracted data:
** '''Time Stamp''': Select this option to identify the time stamp data. The input's data and time pattern must be entered in the format: text box.
-** '''Message''': Select this option to identify the main log entry's message. This is usually an input which could have text of greater length.
-** '''Other''': Select this option to identify any non-standard data. The name must be entered in the name: text box. It does not have to match the element name.
+** '''Message''': Select this option to identify the main log entry's message. This is usually an input which could have text of greater length.
+** '''Other''': Select this option to identify any non-standard data. The name must be entered in the name: text box. It does not have to match the element name.
* '''Action combo:''' Select the action to be performed on the extracted data:
-** '''Set''': Select this option to overwrite the data for the chosen name when there is a match for this element.
-** '''Append''': Select this option to append to the data with the chosen name, if any, when there is a match for this element.
-** '''Append with |''' : Select this option to append to the data with the chosen name, if any, when there is a match for this element, using a | separator between matches.
+** '''Set''': Select this option to overwrite the data for the chosen name when there is a match for this element.
+** '''Append''': Select this option to append to the data with the chosen name, if any, when there is a match for this element.
+** '''Append with |''' : Select this option to append to the data with the chosen name, if any, when there is a match for this element, using a | separator between matches.
Note: A log entry can inherited input data from its parent elements if the data is extracted at a higher level.
The '''Preview:''' text field of each capturing element and attribute and of the Time Stamp will be filled from the parsed data of the first matching log entry. Also, when creating a new child element or attribute, its element or attribute name will be suggested if possible from the preview input data.
-Click the '''Next''' button to go to the second page of the wizard.
+Click the '''Next >''' button to go to the second page of the wizard.
[[Image:images/CustomXMLParserOutput.png]]
The '''Manage Custom Parsers''' dialog is used to manage the list of custom parsers used by the tool. To open the dialog:
-* Select '''Manage Custom Parsers''' from the '''Project Explorer''' view menu.
+* Open the '''Project Explorer''' view.
+* Select '''Manage Custom Parsers...''' from the '''Traces''' folder context menu, or from a trace's '''Select Trace Type...''' context sub-menu.
[[Image:images/ManageCustomParsers.png]]
-
+
The ordered list of currently defined custom parsers for the selected type is displayed on the left side of the dialog.
-
+
To change the type of custom parser to manage, select the '''Text''' or '''XML''' radio button.
-
+
The following actions can be performed from this dialog:
* New...
-
+
Click the '''New...''' button to launch the '''New Custom Parser''' wizard.
-
+
* Edit...
-
+
Select a custom parser from the list and click the '''Edit...''' button to launch the '''Edit Custom Parser''' wizard.
-
+
* Delete
-
+
Select a custom parser from the list and click the '''Delete''' button to remove the custom parser.
* Import...
-
+
Click the '''Import...''' button and select a file from the opened file dialog to import all its custom parsers.
-
+
* Export...
-
+
Select a custom parser from the list, click the '''Export...''' button and enter or select a file in the opened file dialog to export the custom parser. Note that if an existing file containing custom parsers is selected, the custom parser will be appended to the file.
=== Opening a trace using a custom parser ===
Once a custom parser has been created, any [[#Importing Traces in a Project|imported trace]] file can be opened and parsed using it.
To do so:
-
+
* Select a trace in the '''Project Explorer''' view
* Right-click the trace and select '''Select Trace Type...''' > '''Custom Text''' or '''Custom XML''' > ''parser name''
* Double-click the trace or right-click it and select '''Open'''
== LTTng Tracer Control ==
-The LTTng Tracer Control in Eclipse for the LTTng Tracer toolchain version v2.0 (or later) is done using SSH and requires an SSH server to be running on the remote host. For the SSH connection the SSH implementation of RSE is used. For that a new System Type was defined using the corresponding RSE extension. The functions to control the LTTng tracer (e.g. start and stop), either locally or remotely, are available from a dedicated Control View.
+The LTTng Tracer Control in Eclipse for the LTTng Tracer toolchain version v2.0 (or later) is done using SSH and requires an SSH server to be running on the remote host. For the SSH connection the SSH implementation of RSE is used. For that a new System Type was defined using the corresponding RSE extension. The functions to control the LTTng tracer (e.g. start and stop), either locally or remotely, are available from a dedicated Control View.
-In the following sections the LTTng 2.0 tracer control integration in Eclipse is described. Please refer to the LTTng 2.0 tracer control command line manual for more details and descriptions about all commands and their command line parameters [[#References | References]].
+In the following sections the LTTng 2.0 tracer control integration in Eclipse is described. Please refer to the LTTng 2.0 tracer control command line manual for more details and descriptions about all commands and their command line parameters [[#References | References]].
=== Control View ===
-To open the Control View, select '''Window->Show View->Other...->LTTng->Control View''.
+To open the Control View, select '''Window->Show View->Other...->LTTng->Control View''.
[[Image:images/LTTngControlView.png]]
[[Image:images/LTTngControlViewConnect.png]]
-A new display will show for entering the remote host information. A drop down menu will filled with all existing host information which were used before. To enter the host information either select one of the hosts in the drop down menu or enter the host information manually.
+A new display will show for entering the remote host information. A drop down menu will filled with all existing host information which were used before. To enter the host information either select one of the hosts in the drop down menu or enter the host information manually.
[[Image:images/LTTng2NewConnection.png]]
[[Image:images/LTTng2SelectConnection.png]]
-To enter the host information manually select first the button '''Edit connection information'''. Then the text fields '''Connection Name''' and '''Host Name''' will enabled. Enter the relevant information and then select '''Ok'''.
-
+To enter the host information manually select first the button '''Edit connection information'''. Then the text fields '''Connection Name''', '''Host Name''' and '''Port Number''' will be enabled. The '''Host Name''' holds the IP address or DNS name of the remote system. The '''Connection Name''' is the alias name to be displayed in the Control View. The '''Port Number''' is the port number to be used for the IP connection. This parameter is optional and if it is omitted the default port will be used. Enter the relevant information and then select '''Ok'''.
+
[[Image:images/LTTng2EditConnection.png]]
A new display will show for providing the user name and password. This display only opens if no password had been saved before. Enter user name and password in the '''Enter Password''' dialog box and select '''Ok'''.
-The '''Host Name''' holds the IP address or DNS name of the remote system.
-The '''Connection Name''' is the alias name to be displayed in the Control View.
-
[[Image:images/LTTng2EnterPassword.png]]
After pressing '''Ok''' the SSH connection will be established and after successful login the Control View implementation retrieves the LTTng Tracer Control information. This information will be displayed in the Control View in form of a tree structure.
The top level tree node is the representation of the remote connection (host). The connection name of the connection will be displayed. Depending on the connection state different icons are displayed. If the node is '''CONNECTED''' the icon is shown [[Image:images/Target_connected.gif]], otherwise (states '''CONNECTING''', '''DISCONNNECTING''' or '''DISCONNECTED''' the icon is [[Image:images/Target_disconnected.gif]].
-Under the host level two folder groups are located. The first one is the '''Provider''' group. The second one is the '''Sessions''' group.
+Under the host level two folder groups are located. The first one is the '''Provider''' group. The second one is the '''Sessions''' group.
-Under the '''Provider''' group all trace providers are displayed. Trace providers are '''Kernel''' and any user space application that supports UST tracing. Under each provider a corresponding list of events are displayed.
+Under the '''Provider''' group all trace providers are displayed. Trace providers are '''Kernel''' and any user space application that supports UST tracing. Under each provider a corresponding list of events are displayed.
-Under the '''Sessions''' group all current sessions will be shown. The level under the sessions show the configured domains. Currently the LTTng 2.0 Tracer Toolchan supports domain '''Kernel''' and '''UST global'''. Under each domain the configured channels will be displayed. The last level is under the channels where the configured events are displayed.
+Under the '''Sessions''' group all current sessions will be shown. The level under the sessions show the configured domains. Currently the LTTng 2.0 Tracer Toolchan supports domain '''Kernel''' and '''UST global'''. Under each domain the configured channels will be displayed. The last level is under the channels where the configured events are displayed.
Each session can be '''ACTIVE''' or '''INACTIVE'''. Active means that tracing has been started, inactive means that the tracing has been stopped. Depending on the state of a session a different icon is displayed. The icon for an active session is [[Image:images/Session_active.gif]]. The icon for an inactive session is [[Image:images/Session_inactive.gif]].
==== Disconnecting from a Remote Host ====
-To disconnect from a remote host, select the host in the Control View and press the '''Disconnect''' button. Alternatively, press the right mouse button. A context-sensitive menu will show. Select the '''Disconnect''' button.
-
+To disconnect from a remote host, select the host in the Control View and press the '''Disconnect''' button. Alternatively, press the right mouse button. A context-sensitive menu will show. Select the '''Disconnect''' button.
+
[[Image:images/LTTng2ControlViewDisconnect.png]]
==== Connecting to a Remote Host ====
[[Image:images/LTTng2CreateSessionAction.png]]
-A dialog box will open for entering information about the session to be created.
+A dialog box will open for entering information about the session to be created.
[[Image:images/LTTng2CreateSessionDialog.png]]
Fill in the '''Session Name''' and optionally the '''Session Path''' and press '''Ok'''. Upon successful operation a new session will be created and added under the tree node '''Sessions'''.
+==== Creating a Tracing Session With Advanced Options ====
+LTTng Tools version v2.1.0 introduces the possibility to configure the trace output location at session creation time. The trace can be stored in the (tracer) local file system or can be transferred over the network.
+
+To create a tracing session and configure the trace output, open the trace session dialog as described in chapter [[#Creating a Tracing Session | Creating a Tracing Session]]. A dialog box will open for entering information about the session to be created.
+
+[[Image:images/LTTng2CreateSessionDialog_Advanced.png]]
+
+The button '''Advanced >>>''' will only show if the remote host has LTTng Tools v2.1.0 installed. To configure the trace output select the '''Advanced >>>''' button. The Dialog box will be shown new fields to configure the trace output location.
+
+[[Image:images/LTTng2CreateSessionDialog_TracePath.png]]
+
+By default, the button '''Use same protocol and address for data and control''' is selected which allows to configure the same '''Protocol''' and '''Address''' for both data URL and control URL.
+
+If button '''Use same protocol and address for data and control''' is selected the '''Protocol''' can be '''net''' for the default network protocol which is TCP (IPv4), '''net6''' for the default network protocol which is TCP (IPv6) and '''file''' for the local file system. For '''net''' and '''net6''' the port can be configured. Enter a value in '''Port''' for data and control URL or keep them empty for the default port to be used. Using '''file''' as protocol no port can be configured and the text fields are disabled.
+
+If button '''Use same protocol and address for data and control''' is not selected the '''Protocol''' can be '''net''' for the default network protocol which is TCP (IPv4), '''net6''' for the default network protocol which is TCP (IPv6), '''tcp''' for the network protocol TCP (IPv4) and '''tcp6''' for the network protocol TCP (IPv6). Note that for '''net''' and '''net6''' always the default port is used and hence the port text fields are disabled. To configure non-default ports use '''tcp''' or '''tcp6'''.
+
+The text field '''Trace Path''' allows for specifying the path relative to the location defined by the '''relayd''' or relative to the location specified by the '''Address''' when using protocol '''file'''. For more information about the '''relayd''' see '''LTTng relayd User Manual''' in chapter [[#References | References]].
+
+To create a session with advanced options, fill in the relevant parameters and press '''Ok'''. Upon successful operation a new session will be created and added under the tree node '''Sessions'''.
+
+==== Creating a Snapshot Tracing Session ====
+LTTng Tools version v2.3.0 introduces the possibility to create snapshot tracing sessions. After starting tracing the trace events are not stored on disk or over the network. They are only transfered to disk or over the network when the user records a snapshot. To create such a snapshot session, open the trace session dialog as described in chapter [[#Creating a Tracing Session | Creating a Tracing Session]].
+
+[[Image:images/LTTng2CreateSessionDialog_Snapshot.png]]
+
+Fill in all necessary information, select checkbox for '''Snapshot Mode''' and press '''Ok'''. By default, the location for the snapshot output will be on the host where the host is located.
+
+Refer to chapter [[#Recording a Snapshot | Recording a Snapshot]] for how to create a snapshot.
+
==== Enabling Channels - General ====
-Enabling channels can be done using a session tree node when the domain hasn't be created in the session or, alternatively on a domain tree node of a session in case the domain is already available.
+Enabling channels can be done using a session tree node when the domain hasn't be created in the session or, alternatively on a domain tree node of a session in case the domain is already available.
==== Enabling Channels On Session Level ====
-To enable a channel, select the tree node of the relevant session and press the right mouse button. Then select the '''Enable Channel...''' button of the context-sensitive menu.
+To enable a channel, select the tree node of the relevant session and press the right mouse button. Then select the '''Enable Channel...''' button of the context-sensitive menu.
[[Image:images/LTTng2CreateChannelAction.png]]
[[Image:images/LTTng2CreateChannelDialog.png]]
-By default the domain '''Kernel''' is selected and the corresponding default values are shown. To create a UST channel, select '''UST''' under the domain section. To get the default values of UST, then press button '''Default'''.
-
+By default the domain '''Kernel''' is selected. To create a UST channel, select '''UST''' under the domain section. The label <Default> in any text box indicates that the default value of the tracer will be configured. To initialize the dialog box press button '''Default'''.
+
If required update the following channel information and then press '''Ok'''.
-* '''Channel Name''': The name of the channel.
-* '''Number of Sub Buffers''': The number of sub-buffers of the channel.
-* '''Overwrite Mode''': The channel overwrite mode ('''true''' or '''false''')
-* '''Read Timer Interval''': The read timer interval.
+* '''Channel Name''': The name of the channel.
* '''Sub Buffer size''': The size of the sub-buffers of the channel (in bytes).
+* '''Number of Sub Buffers''': The number of sub-buffers of the channel.
* '''Switch Timer Interval''': The switch timer interval.
+* '''Read Timer Interval''': The read timer interval.
+* '''Discard Mode''': '''Overwrite''' events in buffer or '''Discard''' new events when buffer is full.
Upon successful operation, the requested domain will be created under the session tree node as well as the requested channel will be added under the domain. The channel will be '''ENABLED'''.
+==== Configuring Trace File Rotation ====
+
+Since LTTng Tools v2.2.0 it is possible to set the maximum size of trace files and the maximum number of them. These options are located in the same dialog box that is used for enabling channels.
+
+[[Image:images/LTTng2CreateChannelDialogFileRotation.png]]
+
+* '''Maximum size of trace files''': The maximum size of trace files
+* '''Maximum number of trace files''': The maximum number of trace files
+
+==== Configuring per UID and per PID Buffers (UST only) ====
+
+Since LTTng Tools v2.2.0 it is possible to configure the type of buffers for '''UST''' application. It is now possible to choose between per '''UID''' buffers (per user ID) and per '''PID''' buffers (per process ID) using the dialog box for enabling channels.
+
+[[Image:images/LTTng2CreateChannelDialogPerUIDBuffers.png]]
+
+* '''Per PID buffers''': To activate the per PID buffers option for UST channels
+* '''Per UID buffers''': To activate the per UID buffers option for UST channels
+
+If no buffer type is selected then the default value of the tracer will be configured.
+
+Note that '''Global shared buffers''' is only for kernel channel and is pre-selected when '''Kernel''' is selected in the dalog box.
+
+==== Configuring Periodical Flush for metadata Channel ====
+
+Since LTTng Tools v2.2.0 it is possible to configure periodical flush for the metadata channel. To set this, use the checkbox '''Configure metadata channel''' then fill the switch timer interval.
+
+[[Image:images/LTTng2CreateChannelDialogMetadataFlush.png]]
+
==== Enabling Channels On Domain Level ====
Once a domain is available, channels can be enabled directly using the domain. To enable a channel under an existing domain, select the tree node of the relevant domain and press the right mouse button. Then select the '''Enable Channel...''' button of the context-sensitive menu.
[[Image:images/LTTng2CreateChannelOnDomainAction.png]]
-The dialog box for enabling channel will open for entering information about the channel to be created. Note that the domain is pre-selected and cannot be changed.
-
-[[Image:images/LTTng2CreateChannelOnDomainDialog.png]]
-
-Fill the relevant information and press '''Ok'''.
+The dialog box for enabling channel will open for entering information about the channel to be created. Note that the domain is pre-selected and cannot be changed. Fill the relevant information and press '''Ok'''.
==== Enabling and Disabling Channels ====
-To disable one or more enabled channels, select the tree nodes of the relevant channels and press the right mouse button. Then select the '''Disable Channel''' menu item of the context-sensitive menu.
+To disable one or more enabled channels, select the tree nodes of the relevant channels and press the right mouse button. Then select the '''Disable Channel''' menu item of the context-sensitive menu.
[[Image:images/LTTng2DisableChannelAction.png]]
==== Enabling Events - General ====
-Enabling events can be done using different levels in the tree node. It can be done on the session, domain level and channel level. For the case of session or domain, i.e. when no specific channels is assigned then enabling of events is done on the default channel with the name '''channel0''' which created, if not already exists, by the LTTng tracer control on the server side.
+Enabling events can be done using different levels in the tree node. It can be done on the session, domain level and channel level. For the case of session or domain, i.e. when no specific channels is assigned then enabling of events is done on the default channel with the name '''channel0''' which created, if not already exists, by the LTTng tracer control on the server side.
==== Enabling Kernel Events On Session Level ====
-To enable events, select the tree node of the relevant session and press the right mouse button. Then select the '''Enable Event (default channel)...''' button of the context-sensitive menu.
+To enable events, select the tree node of the relevant session and press the right mouse button. Then select the '''Enable Event (default channel)...''' button of the context-sensitive menu.
[[Image:images/LTTng2EventOnSessionAction.png]]
[[Image:images/LTTng2EnabledKernelTracepoints.png]]
-To enable all '''Syscalls''', select the corresponding '''Select''' button and press '''Ok'''.
+To enable all '''Syscalls''', select the corresponding '''Select''' button and press '''Ok'''.
-[[Image:images/LTTng2SyscallsDialog.png]]
+[[Image:images/LTTng2SyscallsDialog.png]]
Upon successful operation, the event with the name '''syscalls''' and event type '''SYSCALL''' will be added under the default channel (channel0). If necessary the domain '''Kernel''' and the channel '''channel0''' will be created.
To enable '''Tracepoint''' events, first select the corresponding '''Select''' button, then select either all tracepoins (select '''All''') or select selectively one or more tracepoints in the displayed tree of tracepoints and finally press '''Ok'''.
[[Image:images/LTTng2UstTracepointEventsDialog.png]]
-
-Upon successful operation, the domain '''UST global''' will be created in the tree (if neccessary), the default channel with name "channel0" will be added under the domain (if necessary) as well as all requested events under the channel. The channel and events will be '''ENABLED'''. Note that for the case that '''All''' tracepoints were selected the wildcard '''*''' is used which will be shown in the Control View as below.
+
+Upon successful operation, the domain '''UST global''' will be created in the tree (if neccessary), the default channel with name "channel0" will be added under the domain (if necessary) as well as all requested events under the channel. The channel and events will be '''ENABLED'''. Note that for the case that '''All''' tracepoints were selected the wildcard '''*''' is used which will be shown in the Control View as below.
[[Image:images/LTTng2EnabledAllUstTracepoints.png]]
For UST it is possible to enable '''Tracepoint''' events using a wildcard. To enable '''Tracepoint''' events with a wildcard, select first the corresponding '''Select''' button, fill the '''Wildcard''' field and press '''Ok'''.
-[[Image:images/LTTng2UstWildcardEventsDialog.png]]
+[[Image:images/LTTng2UstWildcardEventsDialog.png]]
Upon successful operation, the event with the given wildcard and event type '''TRACEPOINT''' will be added under the default channel (channel0). If necessary the domain '''UST global''' and the channel '''channel0''' will be created.
For UST it is possible to enable '''Tracepoint''' events using log levels. To enable '''Tracepoint''' events using log levels, select first the corresponding '''Select''' button, select a log level from the drop down menu, fill in the relevant information (see below) and press '''Ok'''.
-* '''Event Name''': Name to display
+* '''Event Name''': Name to display
* '''loglevel''': To specify if a range of log levels (0 to selected log level) shall be configured
-* '''loglevel-only''': To specify that only the specified log level shall be configured
+* '''loglevel-only''': To specify that only the specified log level shall be configured
[[Image:images/LTTng2UstLoglevelEventsDialog.png]]
==== Enabling Events On Domain Level ====
-Kernel events can also be enabled on the domain level. For that select the relevant domain tree node, click the right mouse button and the select '''Enable Event (default channel)...'''. A new dialog box will open for providing information about the events to be enabled. Depending on the domain, '''Kernel''' or '''UST global''', the domain specifc fields are shown and the domain selector is preselected and read-only.
+Kernel events can also be enabled on the domain level. For that select the relevant domain tree node, click the right mouse button and the select '''Enable Event (default channel)...'''. A new dialog box will open for providing information about the events to be enabled. Depending on the domain, '''Kernel''' or '''UST global''', the domain specifc fields are shown and the domain selector is preselected and read-only.
[[Image:images/LTTng2EventOnDomainAction.png]]
==== Enabling Events On Channel Level ====
-Kernel events can also be enabled on the channel level. If necessary, create a channel as described in sections [[#Enabling Channels On Session Level | Creating Channels On Session Level]] or [[#Enabling Channels On Domain Level | Creating Channels On Domain Level]].
+Kernel events can also be enabled on the channel level. If necessary, create a channel as described in sections [[#Enabling Channels On Session Level | Creating Channels On Session Level]] or [[#Enabling Channels On Domain Level | Creating Channels On Domain Level]].
-Then select the relevant channel tree node, click the right mouse button and the select '''Enable Event...'''. A new dialog box will open for providing information about the events to be enabled. Depending on the domain, '''Kernel''' or '''UST global''', the domain specifc fields are shown and the domain selector is preselected and read-only.
+Then select the relevant channel tree node, click the right mouse button and the select '''Enable Event...'''. A new dialog box will open for providing information about the events to be enabled. Depending on the domain, '''Kernel''' or '''UST global''', the domain specifc fields are shown and the domain selector is preselected and read-only.
[[Image:images/LTTng2EventOnChannelAction.png]]
==== Enabling and Disabling Events ====
-To disable one or more enabled events, select the tree nodes of the relevant events and click the right mouse button. Then select '''Disable Event''' menu item in the context-sensitive menu.
+To disable one or more enabled events, select the tree nodes of the relevant events and click the right mouse button. Then select '''Disable Event''' menu item in the context-sensitive menu.
[[Image:images/LTTng2DisableEventAction.png]]
==== Enabling Tracepoint Events From Provider ====
-It is possible to enable events of type '''Tracepoint''' directly from the providers and assign the enabled event to a session and channel. Before doing that a session has to be created as described in section [[#Creating a Tracing Session | Creating a Tracing Session]]. Also, if other than default channel '''channel0''' is required, create a channel as described in sections [[#Enabling Channels On Session Level | Creating Channels On Session Level]] or [[#Enabling Channels On Domain Level | Creating Channels On Domain Level]].
+It is possible to enable events of type '''Tracepoint''' directly from the providers and assign the enabled event to a session and channel. Before doing that a session has to be created as described in section [[#Creating a Tracing Session | Creating a Tracing Session]]. Also, if other than default channel '''channel0''' is required, create a channel as described in sections [[#Enabling Channels On Session Level | Creating Channels On Session Level]] or [[#Enabling Channels On Domain Level | Creating Channels On Domain Level]].
-To assign tracepoint events to a session and channel, select the events to be enabled under the provider (e.g. provider '''Kernel'''), click right mouse button and then select '''Enable Event...''' menu item from the context sensitive menu.
+To assign tracepoint events to a session and channel, select the events to be enabled under the provider (e.g. provider '''Kernel'''), click right mouse button and then select '''Enable Event...''' menu item from the context sensitive menu.
[[Image:images/LTTng2AssignEventAction.png]]
-A new display will open for defining the session and channel.
-
+A new display will open for defining the session and channel.
+
[[Image:images/LTTng2AssignEventDialog.png]]
-Select a session from the '''Session List''' drop-down menu, a channel from the '''Channel List''' drop-down menu and the press '''Ok'''. Upon successful operation, the selected events will be added to the selected session and channel of the domain that the selected provider belongs to. In case that there was no channel available, the domain and the default channel '''channel0''' will be created for corresponding session. The newly added events will be '''ENABLED'''.
+Select a session from the '''Session List''' drop-down menu, a channel from the '''Channel List''' drop-down menu and the press '''Ok'''. Upon successful operation, the selected events will be added to the selected session and channel of the domain that the selected provider belongs to. In case that there was no channel available, the domain and the default channel '''channel0''' will be created for corresponding session. The newly added events will be '''ENABLED'''.
[[Image:images/LTTng2AssignedEvents.png]]
+==== Configuring Filter Expression On UST Event Fields ====
+
+Since LTTng Tools v2.1.0 it is possible to configure a filter expression on UST event fields. To configure a filter expression on UST event fields, open the enable event dialog as described in chapters [[#Enabling UST Events On Session Level | Enabling UST Events On Session Level]], [[#Enabling Events On Domain Level | Enabling Events On Domain Level]] or [[#Enabling Events On Channel Level | Enabling Events On Channel Level]], select UST if needed, select the relevant '''Tracepoint''' event(s) and enter the filter expression in the '''Filter Expression''' text field.
+
+[[Image:images/LTTng2EnableEventWithFilter.png]]
+
+Alternatively, open the dialog box for assigning events to a session and channel described in [[#Enabling Tracepoint Events From Provider | Enabling Tracepoint Events From Provider]] (for UST providers) and enter the filter expression in the '''Filter Expression''' text field.
+
+[[Image:images/LTTng2AssignEventDialogWithFilter.png]]
+
+For the syntax of the filter expression refer to the '''LTTng Tracer Control Command Line Tool User Manual''' of chapter [[#References |References]].
+
==== Adding Contexts to Channels and Events of a Domain ====
It is possible to add contexts to channels and events. Adding contexts on channels and events from the domain level, will enable the specified contexts to all channels of the domain and all their events. To add contexts on the domain level, select a domain, click right mouse button on a domain tree node (e.g. provider '''Kernel''') and select the menu item '''Add Context...''' from the context-sensitive menu.
[[Image:images/LTTng2AddContextDialog.png]]
-The tree shows all available context that can be added. Select one or more context and the press '''Ok'''. Upon successful operation, the selected context will be added to all channels and their events of the selected domain.
+The tree shows all available context that can be added. Select one or more context and the press '''Ok'''. Upon successful operation, the selected context will be added to all channels and their events of the selected domain.
'''Note''': The LTTng UST tracer only supports contexts '''procname''', '''pthread_id''', '''vpid''' '''vtid'''. Adding any other contexts in the UST domina will fail.
==== Adding Contexts to All Events of a Channel ====
-Adding contexts on channels and events from the channel level, will enable the specified contexts to all events of the selected channel. To add contexts on the channel level, select a channel, click right mouse button on a channel tree node and select the menu item '''Add Context...''' from the context-sensitive menu.
+Adding contexts on channels and events from the channel level, will enable the specified contexts to all events of the selected channel. To add contexts on the channel level, select a channel, click right mouse button on a channel tree node and select the menu item '''Add Context...''' from the context-sensitive menu.
[[Image:images/LTTng2AddContextOnChannelAction.png]]
[[Image:images/LTTng2AddContextToEventsAction.png]]
-A new display will open for selecting one or more contexts to add. Select one or more contexts as described in chapter [[#Adding Contexts to Channels and Events of a Domain | Adding Contexts to Channels and Events of a Domain]]. Upon successful operation, the selected context will be added to the selected event.
+A new display will open for selecting one or more contexts to add. Select one or more contexts as described in chapter [[#Adding Contexts to Channels and Events of a Domain | Adding Contexts to Channels and Events of a Domain]]. Upon successful operation, the selected context will be added to the selected event.
==== Start Tracing ====
[[Image:images/LTTng2StartTracingAction.png]]
-Upon successful operation, the tracing session will be '''ACTIVE''' and the icon of the session will be updated.
+Upon successful operation, the tracing session will be '''ACTIVE''' and the icon of the session will be updated.
+
+==== Recording a Snapshot ====
+
+LTTng Tools version v2.3.0 introduces the possibility to create snapshot tracing sessions. After creating a snapshot session (see [[#Creating a Snapshot Tracing Session | Creating a Snapshot Tracing Session]]) and starting tracing (see [[#Start Tracing | Start Tracing]]) it possible to record snapshots. To record a snapshot select one or more sessions and press the '''Record Snapshot''' button. Alternatively, press the right mouse button on the session tree nodes. A context-sensitive menu will show. Then select the '''Recored Snapshot''' menu item.
+
+[[Image:images/LTTng2RecordSnapshotAction.png]]
+
+This action can be executed many times. It is possible to import the recorded snpshots to a tracing project. The trace session might be '''ACTIVE''' or '''INACTIVE''' for that. Refer to section [[#Importing Session Traces to a Tracing Project | Importing Session Traces to a Tracing Project]] on how to import a trace to a tracing project.
==== Stop Tracing ====
-To stop tracing, select one or more sessions to stop in the Control View and press the '''Stop''' button. Alternatively, click the right mouse button on the session tree nodes. A context-sensitive menu will show. Then select the '''Stop''' menu item.
+To stop tracing, select one or more sessions to stop in the Control View and press the '''Stop''' button. Alternatively, click the right mouse button on the session tree node. A context-sensitive menu will show. Then select the '''Stop''' menu item.
[[Image:images/LTTng2StopTracingAction.png]]
==== Destroying a Tracing Session ====
-To destroy a tracing session, select one or more sessions to destroy in the Control View and press the '''Destroy''' button. Alternatively, click the right mouse button on the session tree node. A context-sensitive menu will show. Then select the '''Destroy...''' menu item. Note that the session has to be '''INACTIVE''' for this operation.
+To destroy a tracing session, select one or more sessions to destroy in the Control View and press the '''Destroy''' button. Alternatively, click the right mouse button on the session tree node. A context-sensitive menu will show. Then select the '''Destroy...''' menu item. Note that the session has to be '''INACTIVE''' for this operation.
[[Image:images/LTTng2DestroySessionAction.png]]
-A confirmation dialog box will open. Click on '''Ok''' to destroy the session otherwise click on '''Cancel'''.
+A confirmation dialog box will open. Click on '''Ok''' to destroy the session otherwise click on '''Cancel'''.
[[Image:images/LTTng2DestroyConfirmationDialog.png]]
==== Refreshing the Node Information ====
-To refresh the remote host information, select any node in the tree of the Control View and press the '''Refresh''' button. Alternatively, click the right mouse button on any tree node. A context-sensitive menu will show. Then select the '''Refresh''' menu item.
+To refresh the remote host information, select any node in the tree of the Control View and press the '''Refresh''' button. Alternatively, click the right mouse button on any tree node. A context-sensitive menu will show. Then select the '''Refresh''' menu item.
[[Image:images/LTTng2RefreshAction.png]]
==== Importing Session Traces to a Tracing Project ====
-To import traces from a tracing session, select the relevant session and click on the '''Import''' Button. Alternatively, click the right mouse button on the session tree node and select the menu item '''Import...''' from the context-sensitive menu.
+To import traces from a tracing session, select the relevant session and click on the '''Import''' Button. Alternatively, click the right mouse button on the session tree node and select the menu item '''Import...''' from the context-sensitive menu.
[[Image:images/LTTng2ImportAction.png]]
[[Image:images/LTTng2ImportDialog.png]]
-Select the trace to be imported by selecting the relevant traces in the tree viewer, select a tracing project from the '''Available Projects''' combo box and select the Overwrite button ('''Overwrite existing trace without warning''') if required. Then press button '''Ok'''. Upon successful import operation the the selected traces will be stored in the '''Traces''' directory of the specified tracing project. From the '''Project Explorer''' view, the trace can be analyzed further.
+By default all traces are selected. Also, a default project with the name '''Remote''' is selected which will be created if necessary. Update the list of traces to be imported, if necessary, by selecting and deselecting the relevant traces in the tree viewer. Also if needed, change the tracing project from the '''Available Projects''' combo box. Select the Overwrite button ('''Overwrite existing trace without warning''') if required. Then press button '''Ok'''. Upon successful import operation the selected traces will be stored in the '''Traces''' directory of the specified tracing project. For '''Kernel''' traces the trace type '''LTTng Kernel''' and for '''UST''' traces the trace type '''Generic CTF Trace''' will be set. From the '''Project Explorer''' view, the trace can be analyzed further.
+
+'''Note''': The trace will be imported with a name constructed with information about session, whether it is a kernel or ust trace, ust buffer type (per UID or per PID) and snapshot details.
'''Note''': If the overwrite button ('''Overwrite existing trace without warning''') was not selected and a trace with the same name of a trace to be imported already exists in the project, then a new confirmation dialog box will open.
[[Image:images/LTTng2ImportRenameDialog.png]]
+==== Importing Network Traces to a Tracing Project ====
+
+Since LTTng Tools v2.1.0 it is possible to store traces over the network. To import network traces, execute the '''Import''' action as described in chapter [[#Importing Session Traces to a Tracing Project|Importing Session Traces to a Tracing Project]]. For network traces the '''Batch Import Trace Wizard''' will be displayed. Follow the instructions in chapter [[#Batch Importing|Batch Importing]] to import the network traces of the current session.
+
=== Properties View ===
The Control View provides property information of selected tree component. Depending on the selected tree component different properties are displayed in the property view. For example, when selecting the node level the property view will be filled as followed:
-
+
[[Image:images/LTTng2PropertyView.png]]
'''List of properties''':
* '''Event''' Properties (Provider)
** '''Event Name''': The name of the event.
** '''Event Type''': The event type ('''TRACEPOINT''' only).
-** '''Log Level''': The log level of the event.
+** '''Fields''': Shows a list of fields defined for the selected event. (UST only, since support for LTTng Tools v2.1.0)
+** '''Log Level''': The log level of the event.
* '''Session''' Properties
** '''Session Name''': The name of the Session.
-** '''Session Path''': The path on the remote host where the traces will be stored.
+** '''Session Path''': The path on the remote host where the traces will be stored. (Not shown for snapshot sessions).
** '''State''': The state of the session ('''ACTIVE''' or '''INACTIVE''')
+** '''Snapshot ID''': The snapshot ID. (Only shown for snapshot sessions).
+** '''Snapshot Name''': The name of the snapshot output configuration. (Only shown for snapshot sessions).
+** '''Snapshot Path''': The path where the snapshot session is located. (Only shown for snapshot sessions).
* '''Domain''' Properties
** '''Domain Name''': The name of the domain.
+** '''Buffer Type''': The buffer type of the domain.
* '''Channel''' Properties
-** '''Channel Name''': The name of the channel.
+** '''Channel Name''': The name of the channel.
** '''Number of Sub Buffers''': The number of sub-buffers of the channel.
** '''Output type''': The output type for the trace (e.g. ''splice()'' or ''mmap()'')
** '''Overwrite Mode''': The channel overwrite mode ('''true''' for overwrite mode, '''false''' for discard)
** '''State''': The channel state ('''ENABLED''' or '''DISABLED''')
** '''Sub Buffer size''': The size of the sub-buffers of the channel (in bytes).
** '''Switch Timer Interval''': The switch timer interval.
-* '''Event''' Properties (Channel)
+* '''Event''' Properties (Channel)
** '''Event Name''': The name of the event.
-** '''Event Type''': The event type ('''TRACEPOINT''', '''SYSCALL''' or '''PROBE''')..
+** '''Event Type''': The event type ('''TRACEPOINT''', '''SYSCALL''' or '''PROBE''').
** '''Log Level''': The log level of the event.
** '''State''': The Event state ('''ENABLED''' or '''DISABLED''')
+** '''Filter''': Shows '''with filter''' if a filter expression is configured else property '''Filter''' is omitted. (since support for LTTng Tools v2.1.0)
=== LTTng Tracer Control Preferences ===
-Serveral LTTng 2.0 tracer control preferences exists which can be configured. To configure these preferences, select '''Window->Preferences''' from the top level menu. The preference display will open. Then select '''Tracing->LTTng Tracer Control Preferences'''. This preferences page allows the user to specify the tracing group of the user and allows the user to configure the logging of LTTng 2.0 tracer control commands and results to a file.
+Serveral LTTng 2.0 tracer control preferences exists which can be configured. To configure these preferences, select '''Window->Preferences''' from the top level menu. The preference display will open. Then select '''Tracing->LTTng Tracer Control Preferences'''. This preferences page allows the user to specify the tracing group of the user and to specify the command execution timeout as well as it allows the user to configure the logging of LTTng 2.0 tracer control commands and results to a file.
[[Image:images/LTTng2Preferences.png]]
-To change the tracing group of the user which will be specified on each command line, enter the new group name in the '''Tracing Group''' text field and click ok. The default tracing group is '''tracing''' and can be restored by pressing the '''Restore Defaults''' button.
+To change the tracing group of the user which will be specified on each command line, enter the new group name in the '''Tracing Group''' text field and click button '''OK'''. The default tracing group is '''tracing''' and can be restored by pressing the '''Restore Defaults''' button.
[[Image:images/LTTng2PreferencesGroup.png]]
-To configure logging of trace control commands and the corresponding command result to a file, selected the button '''Logging'''. To append to an existing log file, select the '''Append''' button. Deselect the '''Append''' button to overwrite any existing log file. It's possible to specify a verbose level. There are 3 levels with inceasing verbosity from '''Level 1''' to '''Level 3'''. To change the verbosity level, select the relevant level or select '''None'''. If '''None''' is selected only commands and command results are logged. Then press on button '''Ok'''. The log file will be stored in the users home directory with the name ''lttng_tracer_control.log''. The name and location cannot be changed. To reset to default preferences, click on the button '''Restore Defaults'''.
+To configure logging of trace control commands and the corresponding command result to a file, selected the button '''Logging'''. To append to an existing log file, select the '''Append''' button. Deselect the '''Append''' button to overwrite any existing log file. It's possible to specify a verbose level. There are 3 levels with inceasing verbosity from '''Level 1''' to '''Level 3'''. To change the verbosity level, select the relevant level or select '''None'''. If '''None''' is selected only commands and command results are logged. Then press on button '''OK'''. The log file will be stored in the users home directory with the name ''lttng_tracer_control.log''. The name and location cannot be changed. To reset to default preferences, click on the button '''Restore Defaults'''.
[[Image:images/LTTng2PreferencesLogging.png]]
+To configure the LTTng command execution timeout, enter a timeout value into the text field '''Command Timeout (in seconds)''' and press on button '''OK'''. To reset to the default value of 15 seconds, click on the button '''Restore Defaults'''.
+
+[[Image:images/LTTng2PreferencesTimeout.png]]
+
= LTTng Kernel Analysis =
Historically, LTTng was developped to trace the Linux kernel and, over time, a number of kernel-oriented analysis views were developped and organized in a perspective.
== LTTng Kernel Perspective ==
-The '''LTTng Kernel''' perspective is built upon the [[#Tracing_Perspective | Tracing Perspective]], re-organizes them slightly and adds the following views:
+The '''LTTng Kernel''' perspective is built upon the [[#Tracing_Perspective | Tracing Perspective]], re-organizes them slightly and adds the following views:
* [[#Control_Flow_View | Control Flow View]] - to visualize processes state transitions
* [[#Resources_View | Resources View]] - to visualize system resources state transitions
== Control Flow View ==
-The '''''Control Flow View''''' is a LTTng-specific view that shows per-process events graphically. To enable it, select ''Control Flow'' under ''LTTng'' within the ''Show View'' window ('''Window''' -> '''Show View''' -> '''Other...'''):
+The '''''Control Flow''''' view is a LTTng-specific view that shows per-process events graphically. To enable it, select ''Control Flow'' under ''LTTng'' within the ''Show View'' window ('''Window''' -> '''Show View''' -> '''Other...'''):
[[Image:images/Cfv_show_view.png]]
[[Image:images/Cfv_global.png]]
-The view is divided into the following important sections: '''<span style="color: #C84545;">process tree</span>''', '''<span style="color: #A1C81A;">process TID, PTID and birth time</span>''', '''<span style="color: #67A3DC;">states flow</span>''' and the '''<span style="color: #AD77D7;">toolbar</span>'''.
+The view is divided into the following important sections: '''process tree and information''', '''control flow''' and the '''toolbar'''.
The following sections provide detailed information for each part of the Control Flow View.
-=== Process tree and informations ===
+=== Process tree and information ===
Processes are organized as a tree within this view. This way, child and parent processes are easy to identify.
The layout is based on the states computed from the trace events.
-A given process may be shown at different places within the tree since the nodes are '''unique (TID, birth time) couples'''. This means that if process B of parent A dies, you'll still see it in the tree. If process A forks process B again, it will be shown as a different node since it won't have the same birth time (and probably not the same TID). This has the advantage that the tree, once loaded, never changes: horizontal scrolling within the [[#States flow|states flow]] remains possible.
+A given process may be shown at different places within the tree since the nodes are '''unique (TID, birth time) couples'''. This means that if process B of parent A dies, you'll still see it in the tree. If process A forks process B again, it will be shown as a different node since it won't have the same birth time (and probably not the same TID). This has the advantage that the tree, once loaded, never changes: horizontal scrolling within the [[#Control flow|control flow]] remains possible.
The TID column shows the process node's '''thread ID''' and the PTID column shows its '''parent thread ID''' (nothing is shown if the process has no parent).
-=== States flow ===
+=== Control flow ===
This part of the Control Flow View is probably the most interesting one. Using the mouse, you can navigate through the trace (go left, right) and zoom on a specific region to inspect its details.
-The colored bars you see represent '''states''' for the associated process node. When a process state changes in time, so does the color. States colors legend is available through a [[#Toolbar|toolbar button]]:
+The colored bars you see represent '''states''' for the associated process node. When a process state changes in time, so does the color. For state '''SYSCALL''' the name of the system call is displayed in the state bar. States colors legend is available through a [[#Toolbar|toolbar button]]:
[[Image:images/Cfv_legend.png]]
This dark yellow is what you'll see most of the time since scheduling puts processes on hold while others run.
-The vertical blue line is the '''current time indicator'''.
+The vertical blue line with T1 above it is the '''current selection indicator'''. When a time range is selected, the region between the begin and end time of the selection will be shaded and two lines with T1 and T2 above will be displayed. The time stamps corresponding to T1, T2 and their delta are shown in the status line when the mouse is hovering over the control flow.
+
+Arrows can be displayed that follow the execution of each CPU across processes. The arrows indicate when the scheduler switches from one process to another for a given CPU. The CPU being followed is indicated on the state tooltip. When the scheduler switches to and from the idle process, the arrow skips to the next process which executes on the CPU after the idle process. Note that an appropriate zoom level is required for all arrows to be displayed.
+
+The display of arrows is optional and can be toggled using the '''Hide Arrows''' toolbar button. It is also possible to follow a CPU's execution across state changes and the scheduler's process switching using the '''Follow CPU Forward/Backward''' toolbar buttons.
==== Using the mouse ====
The states flow is usable with the mouse. The following actions are set:
-* '''drag horizontally''': pan left or right
+* '''left-click''': select a time or time range begin time
+* '''Shift-left-click''': select a time range end time
+* '''left-drag horizontally''': select a time range or change the time range begin or end time
+* '''middle-drag or Ctrl-left-drag horizontally''': pan left or right
+* '''right-drag horizontally''': [[#Zoom region|zoom region]]
* '''click on a colored bar''': the associated process node is selected and the current time indicator is moved where the click happened
* '''mouse wheel up/down''': zoom in or out
-* '''drag the time ruler horizontally''': zoom in or out
-* '''drag the time ruler horizontally with the right button''': [[#Zoom region|zoom region]]
-* '''double-click the time ruler''': reset zoom
+* '''drag the time ruler horizontally''': zoom in or out with fixed start time
+* '''double-click the time ruler''': reset zoom to full range
When the current time indicator is changed (when clicking in the states flow), all the other views are '''synchronized'''. For example, the [[#LTTng_Kernel_Events_Editor|Events Editor]] will show the event matching the current time indicator. The reverse behaviour is also implemented: selecting an event within the Events View will update the Control Flow View current time indicator.
==== Zoom region ====
-To zoom in on a specific region, '''right-click and drag the time ruler''' in order to draw a time range:
+To zoom in on a specific region, '''right-click and drag''' in order to draw a time range:
[[Image:images/Cfv_zoom_region.png]]
* the process name
* the pointed state name
+* the CPU (if applicable)
+* the system call name (if applicable)
* the pointed state date and start/stop times
* the pointed state duration (seconds)
The Control Flow View '''toolbar''', located at the top right of the view, has shortcut buttons to perform common actions:
-[[Image:images/Cfv_toolbar.png]]
-
-The '''Previous event''' and '''Next event''' buttons update the current time indicator so that it's on the previous or next event.
-
-The '''Previous process''' and '''Next process''' buttons select the previous and next process node within the process tree.
+{|
+| [[Image:images/filter_items.gif]]
+| Show View Filter
+| Opens the process filter dialog
+|-
+| [[Image:images/show_legend.gif]]
+| Show Legend
+| Displays the states legend
+|-
+| [[Image:images/home_nav.gif]]
+| Reset the Time Scale to Default
+| Resets the zoom window to the full range
+|-
+| [[Image:images/prev_event.gif]]
+| Select Previous Event
+| Selects the previous state for the selected process
+|-
+| [[Image:images/next_event.gif]]
+| Select Next Event
+| Selects the next state for the selected process
+|-
+| [[Image:images/prev_menu.gif]]
+| Select Previous Process
+| Selects the previous process
+|-
+| [[Image:images/next_menu.gif]]
+| Select Next Process
+| Selects the next process
+|-
+| [[Image:images/zoomin_nav.gif]]
+| Zoom In
+| Zooms in on the selection by 50%
+|-
+| [[Image:images/zoomout_nav.gif]]
+| Zoom Out
+| Zooms out on the selection by 50%
+|-
+| [[Image:images/hide_arrows.gif]]
+| Hide Arrows
+| Toggles the display of arrows on or off
+|-
+| [[Image:images/follow_arrow_bwd.gif]]
+| Follow CPU Backward
+| Selects the previous state following CPU execution across processes
+|-
+| [[Image:images/follow_arrow_fwd.gif]]
+| Follow CPU Forward
+| Selects the next state following CPU execution across processes
+|}
== Resources View ==
+
This view is specific to kernel trace. To open it, go in '''Window''' -> '''Show View''' -> '''Other...''' and select '''LTTng/Resources''' in the list.
-[[Image:images/Rv example.png| Example of resources view with all trace points and syscalls enabled]]
+[[Image:images/Rv_example.png| Example of resources view with all trace points and syscalls enabled]]
-This view shows the state of system resources i.e. if changes occured during the trace either on '''CPUs''', '''IRQs''' or '''soft IRQs''', it will appear in this view. The left side of the view present a list of resources that are affected by at least one event of the trace. The right side illustrate the state in which each resource is at some point in time.
+This view shows the state of system resources i.e. if changes occured during the trace either on '''CPUs''', '''IRQs''' or '''soft IRQs''', it will appear in this view. The left side of the view present a list of resources that are affected by at least one event of the trace. The right side illustrate the state in which each resource is at some point in time. For state '''USERMODE''' it also prints the process name in the state bar. For state '''SYSCALL''' the name of the system call is
+displayed in the state region.
Just like other views, according to which trace points and system calls are activated, the content of this view may change from one trace to another.
[[Image:images/RV_infobox2.png|Shows the next state of the IRQ]]
-This view is also synchronized with the others : [[#Histogram_View | histogram]], [[#LTTng_Kernel_Events_Editor | Events editor]], [[#Control_Flow_View | control flow view]], etc.
+This view is also synchronized with the others : [[#Histogram_View | Histogram View]], [[#LTTng_Kernel_Events_Editor | Events Editor]], [[#Control_Flow_View | Control Flow View]], etc.
=== Navigation ===
=== Toolbar ===
-See Control Flow View's '''[[#Toolbar|Toolbar]]'''.
+The Resources View '''toolbar''', located at the top right of the view, has shortcut buttons to perform common actions:
+
+{|
+| [[Image:images/show_legend.gif]]
+| Show Legend
+| Displays the states legend
+|-
+| [[Image:images/home_nav.gif]]
+| Reset the Time Scale to Default
+| Resets the zoom window to the full range
+|-
+| [[Image:images/prev_event.gif]]
+| Select Previous Event
+| Selects the previous state for the selected resource
+|-
+| [[Image:images/next_event.gif]]
+| Select Next Event
+| Selects the next state for the selected resource
+|-
+| [[Image:images/prev_menu.gif]]
+| Select Previous Resource
+| Selects the previous resource
+|-
+| [[Image:images/next_menu.gif]]
+| Select Next Resource
+| Selects the next resource
+|-
+| [[Image:images/zoomin_nav.gif]]
+| Zoom In
+| Zooms in on the selection by 50%
+|-
+| [[Image:images/zoomout_nav.gif]]
+| Zoom Out
+| Zooms out on the selection by 50%
+|}
== LTTng Kernel Events Editor ==
* '''Timestamp''': the event timestamp
* '''Channel''': the event channel (data collector)
* '''Event Type''': the event type (or kernel marker)
-* '''Content''': the raw event content
+* '''Content''': the raw event content
[[Image:images/LTTng2EventsEditor.png]]
= Timestamp formatting =
-Most views that show timestamps are displayed in the same time format. The unified timestamp format can be changed in the Preferences page. To get to that page, click on '''Window''' -> '''Preferences''' -> '''Tracing''' -> '''Time Format'''. Then a window will show the time format preferences.
+Most views that show timestamps are displayed in the same time format. The unified timestamp format can be changed in the Preferences page. To get to that page, click on '''Window''' -> '''Preferences''' -> '''Tracing''' -> '''Time Format'''. Then a window will show the time format preferences.
[[Image:images/TmfTimestampFormatPage.png]]
* '''Current Format''' a format string generated by the page
* '''Sample Display''' an example of a timestamp formatted with the '''Current Format''' string.
+* '''Time Zone''' the time zone to use when displaying the time. The value '''Local time''' corresponds to the local, system-configured, time zone.
* '''Data and Time format''' how to format the date (days/months/years) and the time (hours/minutes/seconds)
* '''Sub-second format''' how much precision is shown for the sub-second units
* '''Date delimiter''' the character used to delimit the date units such as months and years
= Limitations =
* When parsing text traces, the timestamps are assumed to be in the local time zone. This means that when combining it to CTF binary traces, there could be offsets by a few hours depending on where the traces were taken and where they were read.
+* LTTng Tools v2.1.0 introduced the command line options ''--no-consumer'' and ''--disable-consumer'' for session creation as well as the commands ''enable-consumer'' and ''disable-consumer''. The LTTng Tracer Control in Eclipse doesn't support these options and commands because they will obsolete in LTTng Tools v2.2.0 and because the procedure for session creation offers already all relevant advanced parameters.
-= How to use LTTng to diagnose problems =
+= How to use LTTng to diagnose problems =
LTTng is a tracer, it will give an enormous amount of information about the system it is running on. This means it can solve many types of problems.
-The following are examples of problems that can be solved with a tracer.
+The following are examples of problems that can be solved with a tracer.
-== Random stutters ==
+== Random stutters ==
Bob is running a computer program and it stutters periodically every 2 minutes. The CPU load is relatively low and Bob isn't running low on RAM.
By using system wide kernel tracing, even without deep kernel knowledge Bob was able to isolate a bug in a rogue piece of software in his system.
-== Slow I/O ==
+== Slow I/O ==
Alice is running her server. She noticed that one of her nodes was slowing down, and wasn't sure why, upon reading the trace she noticed that her time between a block request and complete was around 10ms.
* [http://www.eclipse.org/linuxtools/projectPages/lttng/ Linux Tools - LTTng integration]
* [http://www.lttng.org/ LTTng project]
-* [http://lttng.org/files/doc/man-pages/man1/lttng.1.html LTTng 2.0 Tracer Control Command Line Tool]
+* [http://lttng.org/files/doc/man-pages/man1/lttng.1.html LTTng Tracer Control Command Line Tool User Manual]
+* [http://lttng.org/files/doc/man-pages/man8/lttng-relayd.8.html LTTng relayd User Manual]
* [http://wiki.eclipse.org/Linux_Tools_Project/TMF/User_Guide TMF User Guide]
= Updating This Document =